Adjusts the signal levels reported by the wlags49_h2 and wlags49_h25 staging
drivers. With the constants supplied by Agere the signal levels are always
poor, even in close proximity to the AP. The signals are now measured with
a real device. 100% for close proximity to the AP, 0% for the noice floor.
Now the levels shown by the NetworkManager gauge make sense.
Some magic numbers in the related code are replaced by the correct constants
from the wireless extension interface (wireless.h). Also the flag IW_QUAL_DBM
is now set, as specified in the wireless.h header file.
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Henk de Groot <pe1dnn@amsat.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a drive for the Samsung N128 laptop to control the wireless LED
and backlight.
Many thanks to Joey Lee for his help in testing and finding all of my
bugs in the development of this driver, it has been invaluable.
Cc: Joey Lee <jlee@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
a routing protocol for multi-hop ad-hoc mesh networks. The
networks may be wired or wireless. See
http://www.open-mesh.org/ for more information and user space
tools.
This is the first submission for inclusion in staging.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add it to staging Kbuild and fixes some API differences that prevents
compilation.
It seems that the ieee80211 stack is very close to rtl8192su one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add Realtek linux driver for rtl8192u as provided by Realtek
rtl8192u_linux_2.6.0006.1031.2008.tar.gz, send to me C/C staging ML.
This version won't compile against upstream, doesn't follow
Linux CodingStyle and has their own ieee80211 stack.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds generic_gpio and pmem support, both are needed for other
dream drivers.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds TODO list. It is probably incomplete, as many parts were not
reviewed by the upstream maintainers, yet.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These drivers are no longer being developed and the original authors
seem to have abandonded them and hence, do not want them in the mainline
kernel tree.
So sad :(
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These have a wrap bit but again need little work to clean out. There are a
couple of uglies left that want addressing in later clean up. Notably we should
probably keep the local psr copy and wrap as two values.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lots of RX typedefs are just low bits of a u32, so clean them all up in one
go and just work them directly.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yes folks it another unused typedef.. This completes the clean up of the
TX DMA typedefs
Signed-off-by: Alan Cox <alan@linux.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that active development has begun on a mainline version of
a driver for the RTL8187SE that should be called rtl8187se, there
is a conflict with the driver in staging with the same name.
To solve the conflict, rename the driver in staging to r8187se.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vendor-written driver for the RTL8187SE has a private variable
for the card type, even though it only occurs in PCI format.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When this code is used for the rtl8187se, the value of card_8185
in struct r8180_priv is always 7 or 8. As a result, the program
flow can be simplified.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes superfluous exclamation marks from strings and comments, and
also three spelling typos.
Signed-off-by: Sebastian Dalfuß <sd@sedf.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add driver support for the tsl2563 TAOS ambient light sensor. After looking at
discussions on LKML, the driver was modified from a 'hwmon' driver to an 'iio'
driver. The sysfs interfaces have been tested on an RX51 (N900) to see if it
responds to changing light conditions.
The only real reason for submitting this to staging is that it is dependent on
the IIO subsystem.
Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warning:
drivers/staging/sep/sep_driver.c:276: warning: format '%08llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t'
and variable may be used uninitialized (correct):
drivers/staging/sep/sep_driver.c:1774: warning: 'error' may be used uninitialized in this function
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warnings in vt665[56]:
drivers/staging/vt6655/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6655/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
drivers/staging/vt6656/firmware.c:804: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
max1363 uses both the iio hardware ring buffer and software
ring buffer interfaces, but its Makefile and Kconfig do not
reflect that usage, so its build breaks. Add a new Kconfig
symbol to reflect that usage and change max1363.h & Makefile
to use the new Kconfig symbol.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
`|' has a higher precedence than `?' so since MSG_WAITALL is
defined 0x100, MSG_MORE was always written to the msg_flag.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The DMA resource allocation function is called "vme_request_dma" while
master and slave window allocation functions are called
"vme_master_request" and "vme_slave_request" respectively. Rename
"vme_request_dma" to "vme_dma_request" to fit the pattern.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vme_lm_free() function is not clearing up the resource created in
vme_lm_request(). In addition vme_lm_free() is void function and is used in
exit/error paths, we should wait for mutex to become free rather than
exiting and not freeing the resource.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The TSI148 driver currently does not allow a size of zero to be passed to a
window. Zero is a valid value if the window is being disabled. Allow
windows to be disabled and their registers cleared.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's causing people to ignore problems in the file, so get rid
of them so it's obvious something is wrong in the future.
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently the VME callback infrastructure is replicated in each VME driver.
Move this common code into the VME core. Rename functions to fit in better
with naming of other VME functions.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Sesterhenn noticed that vme_user is overflowing an array used by
sprintf. Use a bigger array.
CC: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
