Refuse to add events when the group wouldn't fit onto the PMU
anymore.
Naive implementation.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <1254911461.26976.239.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On some Intel processors, not all events can be measured in all
counters. Some events can only be measured in one particular
counter, for instance. Assigning an event to the wrong counter does
not crash the machine but this yields bogus counts, i.e., silent
error.
This patch changes the event to counter assignment logic to take
into account event constraints for Intel P6, Core and Nehalem
processors. There is no contraints on Intel Atom. There are
constraints on Intel Yonah (Core Duo) but they are not provided in
this patch given that this processor is not yet supported by
perf_events.
As a result of the constraints, it is possible for some event
groups to never actually be loaded onto the PMU if they contain two
events which can only be measured on a single counter. That
situation can be detected with the scaling information extracted
with read().
Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1254840129-6198-3-git-send-email-eranian@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Intel fixed counters do not support all the filters possible with a
generic counter. Thus, if a fixed counter event is passed but with
certain filters set, then the fixed_mode_idx() function must fail
and the event must be measured in a generic counter instead.
Reject filters are: inv, edge, cnt-mask.
Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1254840129-6198-2-git-send-email-eranian@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have merged the trace.info file into perf.data by adding one
section in the perf headers. This makes it incompatible with
previous version: the new perf tools can't read the older
perf.data.
To support the previous format, we check the headers size. If they
have the same size than in the previous format, then ignore the
trace info section that doesn't exist.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255032449-12022-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit 9a92b479b2 ("perf
tools: Improve thread comm resolution in perf sched") and fixes the
real bug.
The bug was elsewhere:
We are failing to resolve thread names in perf sched because the
table of threads we are building, on top of comm events, has a per
process granularity. But perf sched, unlike the other perf tools,
needs a per thread granularity as we are profiling every tasks
individually.
So fix it by building our threads table using the tid instead of
the pid as the thread identifier.
v2: Revert the previous fix - it is not really needed
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255028657-11158-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This removes the ovelapping of vmlinux addresses with modules,
using the ELF section name when using --vmlinux and creating a
unique DSO name when using /proc/kallsyms ([kernel].N).
This is done by creating multiple 'struct map' instances for
address ranges backed by DSOs that have just the symbols for that
range and a name that is derived from the ELF section name.o
Now it is possible to ask for just the symbols in some particular
kernel section:
$ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \
--dsos [kernel].vsyscall_fn | head -15
52.73% Xorg [.] vread_hpet
18.61% firefox [.] vread_hpet
14.50% npviewer.bin [.] vread_hpet
6.83% compiz [.] vread_hpet
5.73% glxgears [.] vread_hpet
0.63% java [.] vread_hpet
0.30% gnome-terminal [.] vread_hpet
0.23% perf [.] vread_hpet
0.18% xchat [.] vread_hpet
$
Now we don't have to first lookup the list of modules and then, if
it fails, vmlinux symbols, its just a simple lookup for the map
then the symbols, just like for threads.
Reports generated using /proc/kallsyms and --vmlinux should provide
the same results, modulo the DSO name for sections other than
".text".
But they don't right now because things like:
ffffffff81011c20-ffffffff81012068 system_call
ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs
ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath
ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call
I.e. overlapping symbols, again some ASM special case that we have
to fixup.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Like printing every symbol created.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254923340-4870-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we get sched traces that involve a task that was already
created before opening the event, we won't have the comm event for
it.
So if we can't find the comm event for a given thread, we look at
the traces that may contain these informations.
Before:
ata/1:371 | 0.000 ms | 1 | avg: 3988.693 ms | max: 3988.693 ms |
kondemand/1:421 | 0.096 ms | 3 | avg: 345.346 ms | max: 1035.989 ms |
kondemand/0:420 | 0.025 ms | 3 | avg: 421.332 ms | max: 964.014 ms |
:5124:5124 | 0.103 ms | 5 | avg: 74.082 ms | max: 277.194 ms |
:6244:6244 | 0.691 ms | 9 | avg: 125.655 ms | max: 271.306 ms |
firefox:5080 | 0.924 ms | 5 | avg: 53.833 ms | max: 257.828 ms |
npviewer.bin:6225 | 21.871 ms | 53 | avg: 22.462 ms | max: 220.835 ms |
:6245:6245 | 9.631 ms | 21 | avg: 41.864 ms | max: 213.349 ms |
After:
ata/1:371 | 0.000 ms | 1 | avg: 3988.693 ms | max: 3988.693 ms |
kondemand/1:421 | 0.096 ms | 3 | avg: 345.346 ms | max: 1035.989 ms |
kondemand/0:420 | 0.025 ms | 3 | avg: 421.332 ms | max: 964.014 ms |
firefox:5124 | 0.103 ms | 5 | avg: 74.082 ms | max: 277.194 ms |
npviewer.bin:6244 | 0.691 ms | 9 | avg: 125.655 ms | max: 271.306 ms |
firefox:5080 | 0.924 ms | 5 | avg: 53.833 ms | max: 257.828 ms |
npviewer.bin:6225 | 21.871 ms | 53 | avg: 22.462 ms | max: 220.835 ms |
npviewer.bin:6245 | 9.631 ms | 21 | avg: 41.864 ms | max: 213.349 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1255012632-7882-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This librarizes the perf.data file mapping and handling in various
perf tools, roughly reducing the amount of code and fixing the
places that mmap from beginning of the file whereas we want to mmap
from the beginning of the data, leading to page fault because the
mmap window is too small since the trace info are written in the
file too.
TODO:
- convert perf timechart too
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091007104729.GD5043@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This drops the trace.info file and move its contents into the
common perf.data file.
This is done by creating a new trace_info section into this file. A
user of perf headers needs to call perf_header__set_trace_info() to
save the trace meta informations into the perf.data file.
A file created by perf after his patch is unsupported by previous
version because the size of the headers have increased.
That said, it's two new fields that have been added in the end of
the headers, and those could be ignored by previous versions if
they just handled the dynamic header size and then ignore the
unknow part. The offsets guarantee the compatibility. We'll do a
-stable fix for that.
But current previous versions handle the header size using its
static size, not dynamic, then it's not backward compatible with
trace records.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091006213643.GA5343@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, we are mapping perf.data in the beginning of the file
and use the data offset as a buffer offset.
This may exceed the mapping area if the data offset is upper than
page_size * mmap_window and result in a page fault (thing that
happen if we merge trace.info in perf.data).
Instead, let's start the mapping in the page that matches our data
offset.
v2: Drop a junk from another patch (trace_report() removal)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1254856886-10348-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use auto-freq events by default in perf record and
perf top.
This allows more consistent hardware event sampling,
regardless of the intensity of the underlying event.
It also keeps us from over-sampling on larger/busier
systems.
(also make surrounding initializations more consistent)
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The sign info used for filters in the kernel is also useful to
applications that process the trace stream. Add it to the format
files and make it available to userspace.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: hch@infradead.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254809398-8078-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some architectures such as Sparc, ARM and MIPS (basically
everything with flush_dcache_page()) need to deal with dcache
aliases by carefully placing pages in both kernel and user maps.
These architectures typically have to use vmalloc_user() for this.
However, on other architectures, vmalloc() is not needed and has
the downsides of being more restricted and slower than regular
allocations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1254830228.21044.272.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Asm routines that end up having size equal to zero are not really
zero sized, and as now we do kernel_maps__fixup_sym_end, at least
for kernel routines this gets fixed.
A similar fixup needs to be done for the userspace bits as well,
but as this fixup started only because in /proc/kallsyms we don't
have the end address nor the function size, it appeared here first.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254796503-27203-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The syscall event definitions use long for the syscall exit ret
value, but unsigned long for the same thing in the format and field
definitions. Change them all to long.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254808849-7829-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In resolve_symbol, as we're moving to breaking the kernel symbols
list per address ranges, i.e. kernel linking sections, so that we
don't have a big kernel_map that in its range covers what is in the
modules.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we get kallsyms processing closer to vmlinux + modules
symtabs processing.
One change in behaviour is that since when one specifies --vmlinux
-m should be used to ask for modules, so it is now for kallsyms as
well.
Also continue if one manages to load the vmlinux data but module
processing fails, so that at least some analisys can be done with
part of the needed symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we launch the child on behalf of the user, ensure that it dies
along with ourselves when we are interrupted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
LKML-Reference: <1254616502-4728-1-git-send-email-chris@chris-wilson.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now perf report and annotate do the callgraph/hit processing in
their specialized hist_entry__add functions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Representing modules as struct map entries, backed by a DSO, etc,
using /proc/modules to find where the module is loaded.
DSOs now can have a short and long name, so that in verbose mode we
can show exactly which .ko or vmlinux image was used.
As kernel modules now are a DSO separate from the kernel, we can
ask for just the hits for a particular set of kernel modules, just
like we can do with shared libraries:
[root@doppio linux-2.6-tip]# perf report -n --vmlinux
/home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15
84.58% 13266 Xorg [k] drm_clflush_pages
4.02% 630 Xorg [k] trace_kmalloc.clone.0
3.95% 619 Xorg [k] drm_ioctl
2.07% 324 Xorg [k] drm_addbufs
1.68% 263 Xorg [k] drm_gem_close_ioctl
0.77% 120 Xorg [k] drm_setmaster_ioctl
0.70% 110 Xorg [k] drm_lastclose
0.68% 106 Xorg [k] drm_open
0.54% 85 Xorg [k] drm_mm_search_free
[root@doppio linux-2.6-tip]#
Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko
would have the same effect. Allowing specifying just 'drm.ko' is left
for another patch.
Processing kallsyms so that per kernel module struct map are
instantiated was also left for another patch. That will allow
removing the module name from each of its symbols.
struct symbol was reduced by removing the ->module backpointer and
moving it (well now the map) to struct symbol_entry in perf top,
that is its only user right now.
The total linecount went down by ~500 lines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Right now generate-cmdlist.sh is not executable, so we
should call it as an argument ".".
This fixes cases where due to different umask defaults
the generate-cmdlist.sh script is not executable in
a kernel tree checkout.
Signed-off-by: Mulyadi Santosa <mulyadi.santosa@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <f284c33d0909251201w422e9687x8cd3a784e85adf7d@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While at it: we can traverse ctx->group_list to get all
group leader, it should be safe since we hold ctx->mutex.
Changlog v1->v2:
- remove WARN_ON_ONCE() according to Peter Zijlstra's suggestion
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ABC5AF9.6060808@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Paul Mackerras says:
"Actually, looking at this more closely, it has to be a group
leader anyway since it's at the top level of ctx->group_list. In
fact I see four places where we do:
list_for_each_entry(event, &ctx->group_list, group_entry) {
if (event == event->group_leader)
...
or the equivalent, three of which appear to have been introduced
by afedadf2 ("perf_counter: Optimize sched in/out of counters")
back in May by Peter Z.
As far as I can see the if () is superfluous in each case (a
singleton event will be a group of 1 and will have its
group_leader pointing to itself)."
[ See: http://marc.info/?l=linux-kernel&m=125361238901442&w=2 ]
And Peter Zijlstra points out this is a bugfix:
"The intent was to call event_sched_{in,out}() for single event
groups because that's cheaper than group_sched_{in,out}(),
however..
- as you noticed, I got the condition wrong, it should have read:
list_empty(&event->sibling_list)
- it failed to call group_can_go_on() which deals with ->exclusive.
- it also doesn't call hw_perf_group_sched_in() which might break
power."
[ See: http://marc.info/?l=linux-kernel&m=125369523318583&w=2 ]
Changelog v1->v2:
- Fix the title name according to Peter Zijlstra's suggestion
- Remove the comments and WARN_ON_ONCE() as Peter Zijlstra's
suggestion
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ABC5A55.7000208@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For doing work on the Linux power management components, I need to
make long (30+ seconds) traces. Currently, this then results in a
HUGE svg file, with mostly process data that isn't interesting.
This patch adds a --power-only mode to perf timechart that only
outputs the CPU power section of the SVG; this significantly
reduces the size of the SVG file, making even 30+ second traces
viewable with inkscape.
As a minor tweak for the same effect, the minimum text size is
decreased; current inkscape cannot zoom in deep enough to show text
this small, but it reduces inkscape compute time.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: peterz@infradead.org
LKML-Reference: <20090924154013.0675ab71@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several variables are not used at all, cut'n'paste leftovers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <20090928200818.GF3361@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several variables are not used at all, cut'n'paste leftovers.
Also check if the sample_type is RAW earlier, to avoid needless
searches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move histogram related functions into their own files (hist.c and
hist.h) and make use of them in builtin-annotate.c and
builtin-report.c.
Signed-off-by: John Kacur <jkacur@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <alpine.LFD.2.00.0909281531180.8316@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
.. duplicated by merging the same fix twice, for details see commit
0d9df2515d ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following commit made console open fails while booting:
commit b50989dc44
Author: Alan Cox <alan@linux.intel.com>
Date: Sat Sep 19 13:13:22 2009 -0700
tty: make the kref destructor occur asynchronously
Due to tty release routines run in a workqueue now, error like the
following will be reported while booting:
INIT open /dev/console Input/output error
It also causes hibernation regression to appear as reported at
http://bugzilla.kernel.org/show_bug.cgi?id=14229
The reason is that now there's latency issue with closing, but when
we open a "closing not finished" tty, -EIO will be returned.
Fix it as per the following Alan's suggestion:
Fun but it's actually not a bug and the fix is wrong in itself as
the port may be closing but not yet being destructed, in which case
it seems to do the wrong thing. Opening a tty that is closing (and
could be closing for long periods) is supposed to return -EIO.
I suspect a better way to deal with this and keep the old console
timing is to split tty->shutdown into two functions.
tty->shutdown() - called synchronously just before we dump the tty
onto the waitqueue for destruction
tty->cleanup() - called when the destructor runs.
We would then do the shutdown part which can occur in IRQ context
fine, before queueing the rest of the release (from tty->magic = 0
... the end) to occur asynchronously
The USB update in -next would then need a call like
if (tty->cleanup)
tty->cleanup(tty);
at the top of the async function and the USB shutdown to be split
between shutdown and cleanup as the USB resource cleanup and final
tidy cannot occur synchronously as it needs to sleep.
In other words the logic becomes
final kref put
make object unfindable
async
clean it up
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
[ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ]
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
[ Changed serial naming to match new rules, dropped tty_shutdown as per
comments from Alan Stern - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3d5b6fb47a ("ACPI: Kill overly
verbose "power state" log messages") removed the actual use of this
variable, but didn't remove the variable itself, resulting in build
warnings like
drivers/acpi/processor_idle.c: In function ‘acpi_processor_power_init’:
drivers/acpi/processor_idle.c:1169: warning: unused variable ‘i’
Just get rid of the now unused variable.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code
But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix hwpoison code related build failure on 32-bit NUMAQ
ia64's sim_defconfig uses CONFIG_ACPI=n
which now #define's acpi_disabled in <linux/acpi.h>
So we shouldn't re-define it here in <asm/acpi.h>
Signed-off-by: Len Brown <len.brown@intel.com>
I was recently lucky enough to get a 64-CPU system, so my kernel log
ends up with 64 lines like:
ACPI: CPU0 (power states: C1[C1] C2[C3])
This is pretty useless clutter because this info is already available
after boot from both /sys/devices/system/cpu/cpu*/cpuidle/state?/ as
well as /proc/acpi/processor/CPU*/power.
So just delete the code that prints the C-states in processor_idle.c.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Len Brown <len.brown@intel.com>
