adulau/ootp
1
0
Fork 0
mirror of https://github.com/adulau/ootp.git synced 2024-11-22 10:07:12 +00:00
Code Issues Projects Releases Packages Wiki Activity
ootp/spyrus-par2/main.c

1403 lines
33 KiB
C
Raw Blame History

/*
* Copyright (c) 2005 Mark Fullmer
* Copyright (c) 2009 Mark Fullmer and the Ohio State University
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: main.c 89 2009-12-28 01:35:00Z maf $
*/
#include <htc.h>
#include "r2sdk.h"
#include "spi.h"
#include "delay.h"
/*
*/
#define NO_CALC
/*
* HI-TECH C version 9.x does not use a long jump for its startup code.
* This is a problem since the bootloader in the PARII expects this.
*
* With the use of --codeoffset=4 and the following assembler we get the
* 8.x behavior (albeit with an extra goto)
*
* Note this is hardcoded to jump to 0x04. If interrupts are used the startup
* code may go elsewhere.
*
*/
#asm
psect reserved,class=CODE, delta=2
CLRF 0x03
MOVLW 0x0
MOVWF 0xA
GOTO 0x04; Jump to startup
#endasm
/* also defined in otpsc.h */
#define SC_GETHOSTNAME_CLA 0x80
#define SC_GETHOTP_CLA 0x80
#define SC_SETPIN_CLA 0x80
#define SC_TESTPIN_CLA 0x80
#define SC_GETHOTPCOUNT32_CLA 0x80
#define SC_GETHOTPHOST_CLA 0x80
#define SC_GETHOTPHOSTCOUNT32_CLA 0x80
#define SC_GETSPYRUSEEBLOCK_CLA 0x80
#define SC_GETHOSTNAME_INS 0x44
#define SC_GETHOTP_INS 0x46
#define SC_SETPIN_INS 0x4C
#define SC_TESTPIN_INS 0x4E
#define SC_GETHOTPCOUNT32_INS 0x58
#define SC_GETHOTPHOST_INS 0x5A
#define SC_GETHOTPHOSTCOUNT32_INS 0x5C
#define SC_GETSPYRUSEEBLOCK_INS 0xA2
U8 protocol = 0x03;
RESP_INFO *Resp;
bank1 U8 Buf[72]; /* Spyrus I/O buffer */
bank2 U8 dbuf[2][16]; /* two current hostnames for menu */
bank2 U8 obuf[2]; /* option buffer for menu items */
U8 myPIN[5]; /* PIN */
U8 newPIN[5]; /* newPIN if set */
U8 sc_cmdLen; /* SC command length */
U8 sc_idx; /* SC host index */
/*
* sc_count and sc_countp must be in same bank or C compiler will
* generate incorrect code
*/
bank2 U32 sc_count; /* SC host count */
bank2 U8 *sc_countp; /* byte pointer to sc_count */
/* menu vars */
U8 menu_active; /* # of active menu items */
U8 menu_cursor; /* menu cursor position (top/bottom) */
U8 menu_idx; /* index of menu */
U8 ml_flags; /* flags for main loop */
U8 short_d0; /* shortcut digit 0 */
U8 key; /* key input */
U8 key_num; /* key number (ASCII 0..9) */
/* scratch bytes */
U8 scratch_buf5[5];
/* size of initialization data for EEProm */
#define EE_INIT_SIZE 224
/* size of EEProm */
#define EE_SIZE 256
/* number of 16 byte blocks in EEProm */
#define EE_BLOCKS 16
/* number of bytes in a block */
#define EE_BLOCK_SIZE 16
#define EE_BLOCK_SIZE_SHIFT 4 /* 2^4=16 */
/* EE Memory Map */
#define EE_MAGIC_ADDR 0
#define EE_READER_KEY_ADDR 3
#define EE_CALC_MSG_ADDR 8
#define EE_L1GREET_ADDR 20
#define EE_L2GREET_ADDR 32
#define EE_L1MAIN_ADDR 44
#define EE_L2MAIN_ADDR 56
#define EE_CHALLENGE_ADDR 68
#define EE_L1LOCKED_ADDR 80
#define EE_L2LOCKED_ADDR 92
#define EE_L1ACCESS_DENY_ADDR 104
#define EE_L2ACCESS_DENY_ADDR 116
#define EE_NOHOSTS_ADDR 128
#define EE_L1NEWPIN_ADDR 140
#define EE_L2NEWPIN_ADDR 152
#define EE_L3NEWPIN_ADDR 164
#define EE_PINCHANGED_ADDR 176
#define EE_NOCARD_ADDR 188
#define EE_TRYHARDER_ADDR 200
#define EE_MAGIC_LEN 3
#define EE_READER_KEY_LEN 5
#define EE_CALC_MSG_LEN 12
#define EE_L1GREET_LEN 12
#define EE_L2GREET_LEN 12
#define EE_L1MAIN_LEN 12
#define EE_L2MAIN_LEN 12
#define EE_CHALLENGE_LEN 12
#define EE_L1LOCKED_LEN 12
#define EE_L2LOCKED_LEN 12
#define EE_L1ACCESS_DENY_LEN 12
#define EE_L2ACCESS_DENY_LEN 12
#define EE_NOHOSTS_LEN 12
#define EE_L1NEWPIN_LEN 12
#define EE_L2NEWPIN_LEN 12
#define EE_L3NEWPIN_LEN 12
#define EE_PINCHANGED_LEN 12
#define EE_NOCARD_LEN 12
#define EE_TRYHARDER_LEN 12
/* EEInit */
const U8 EEDefault[] = {
0x6d,0x61,0x66,0x30,0x30,0x30,0x30,0x30,
0x4f,0x41,0x52,0x6e,0x65,0x74,0x3a,0x32,
0x30,0x30,0x39,0x20,0x20,0x20,0x20,0x4f,
0x41,0x52,0x6e,0x65,0x74,0x20,0x20,0x20,
0x50,0x49,0x4e,0x3a,0x20,0x20,0x20,0x20,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x4f,
0x41,0x52,0x6e,0x65,0x74,0x20,0x20,0x20,
0x20,0x20,0x56,0x65,0x72,0x69,0x66,0x69,
0x65,0x64,0x20,0x20,0x43,0x68,0x61,0x6c,
0x6c,0x65,0x6e,0x67,0x65,0x3a,0x20,0x20,
0x31,0x30,0x20,0x46,0x61,0x69,0x6c,0x75,
0x72,0x65,0x73,0x20,0x43,0x61,0x72,0x64,
0x20,0x4c,0x6f,0x63,0x6b,0x65,0x64,0x20,
0x20,0x20,0x20,0x41,0x63,0x63,0x65,0x73,
0x73,0x20,0x20,0x20,0x20,0x20,0x20,0x44,
0x65,0x6e,0x69,0x65,0x64,0x20,0x20,0x20,
0x20,0x20,0x4e,0x6f,0x20,0x48,0x6f,0x73,
0x74,0x73,0x20,0x20,0x53,0x65,0x74,0x20,
0x4e,0x65,0x77,0x20,0x50,0x49,0x4e,0x20,
0x4e,0x65,0x77,0x50,0x49,0x4e,0x3a,0x20,
0x20,0x20,0x20,0x20,0x41,0x67,0x61,0x69,
0x6e,0x3a,0x20,0x20,0x20,0x20,0x20,0x20,
0x50,0x49,0x4e,0x20,0x43,0x68,0x61,0x6e,
0x67,0x65,0x64,0x20,0x4e,0x6f,0x20,0x43,
0x61,0x72,0x64,0x20,0x20,0x20,0x20,0x20,
0x54,0x72,0x79,0x20,0x48,0x61,0x72,0x64,
0x65,0x72,0x20,0x20,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
const U8 VERSION[] = {
/* record length */
0x0C,\
/* Serial # */
0x0A, 'm', 'a', 'f', ' ', 'H', 'O', 'T', 'P', ' ', ' ',\
/* AE kernel version / program access (unused) */
0x14, 0x22, 0x33
};
U8 getPIN(U8 *dest, U8 pos);
void getCount(void);
U8 dispHOTP(U8 fmt);
U8 hexdigit(U8 d);
U8 SCTransact(void);
void cmdSCTestPIN(void);
void cmdSCSetPIN(void);
void cmdSCGetHOTPHostCount32(void);
void cmdSCGetHOTPCount32(void);
void cmdCsum(void);
void cmdSCGetSpyrusEEBlock(U8 i);
U8 doSCGetHostname(U8 idx, U8 row);
void powerdown(void);
void msg_powerdown(void);
void menuUpdateCursor(void);
void menuUpdate(void);
void menuInit(void);
void keyGet(void);
void keyDecodeNumber(void);
void EEInit(void);
U8 EELen(U8 addr, U8 len);
#define FLAGS_SCREEN0_UPDATE 0x01 /* initial screen update? */
#define FLAGS_INPUT_COUNT 0x02 /* input count before HOTP? */
#define FLAGS_MENU_SHORT_D0 0x04 /* menu shortcut digit 0 */
#define FLAGS_MENU_ACTIVE 0x08 /* menu is active */
#define HOSTNAME_FLAG_MASK 0x80 /* high bit set */
#define HOSTNAME_POS_CHALLENGE 0x00 /* require challenge input */
#define HOSTNAME_POS_READERKEY 1 /* require reader key */
#define HOSTNAME_POS_FMT 2 /* format, 0=hex, 1=decimal */
#define HOSTNAME_POS_FMT3 8 /* 0000=HEX40, 0001=HEX40 */
#define HOSTNAME_POS_FMT2 9 /* 0010=DEC31.6 0011=DEC31.7 */
#define HOSTNAME_POS_FMT1 10 /* 0100=DEC31.8 0101=DEC31.9 */
#define HOSTNAME_POS_FMT0 11 /* 0110=DEC31.10 0111=DHEX40 */
#define OPTION_FLAG_CHALLENGE 0x01 /* option set to request challenge */
#define OPTION_FLAG_FMT 0x02 /* option to format HOTP */
int main(void)
{
U8 i, c, j, addr, fmt;
/* init */
Resp = (RESP_INFO*)Buf;
r2_init();
sc_countp = (U8*)&sc_count;
i = ServiceQuery();
/* initialize EEProm if not set */
EEInit();
if (i == SQ_CALC) {
#ifndef NO_CALC
DoCalc(&Resp->data[2]);
Str2Lcd(0,0,&Resp->data[2]);
#else
EE2LCD(0, 0, EE_CALC_MSG_ADDR, EE_CALC_MSG_LEN);
msg_powerdown();
#endif /* NO_CALC */
} /* SQ_CALC */
if (i == SQ_FW_VERSION) {
for (i = 0; i < 0x0E; ++i)
Buf[i] = VERSION[i];
snd_cmd(FIRMWARE_INFO, 0x0E, Buf);
get_resp(Resp);
}
/* anything to do? */
if (i != SQ_CARD_KEY)
powerdown();
ClearLcd();
/* get valid PIN */
while (1) {
/* initial greeting */
EE2LCD(0, 0, EE_L1GREET_ADDR, EE_L1GREET_LEN);
EE2LCD(1, 0, EE_L2GREET_ADDR, EE_L2GREET_LEN);
/* Get PIN */
i = getPIN(myPIN,4);
/* magic sequence to load EEProm */
if (i == 1) {
scratch_buf5[2] = 0;
ClearLcd();
Str2Lcd(0, 0, "EEWrite");
/* foreach block */
for (i = 0; i < EE_BLOCKS; ++i) {
cmdSCGetSpyrusEEBlock(i);
if (SCTransact() != 0)
powerdown();
/*
* 2 byte resp (2) : 0,1
* NAD,PCB,LEN (3) : 2,3,4
* idx (1) : 5
* eeData (16) : 6..21
*/
scratch_buf5[0] = hexdigit(i>>4);
scratch_buf5[1] = hexdigit(i&0x0F);
Str2Lcd(1, 0, scratch_buf5);
/* foreach byte in the block */
for (j = 0; j < EE_BLOCK_SIZE; ++j) {
c = Buf[6+j];
addr = (i<<EE_BLOCK_SIZE_SHIFT) + j;
EEPROM_WRITE(addr, c);
} /* j */
/* signal last block */
if (Buf[5] & 0x80)
break;
} /* i */
/* wait for last write to complete */
while (WR)
continue;
ClearLcd();
continue;
} /* load EEProm */
/* Test PIN command */
cmdSCTestPIN();
/* Initiate smart card transaction */
if (SCTransact() == 0)
break; /* success */
} /* getPIN */
/* initialize for main screen input */
menuInit();
/* main key loop */
while (1) {
if (ml_flags & FLAGS_SCREEN0_UPDATE) {
EE2LCD(0, 0, EE_L1MAIN_ADDR, EE_L1MAIN_LEN);
EE2LCD(1, 0, EE_L2MAIN_ADDR, EE_L2MAIN_LEN);
ml_flags &= ~FLAGS_SCREEN0_UPDATE;
}
keyGet();
/****** GET COUNT BEFORE HOTP */
if (key == RAW_POUND) {
/* toggle need_challenge */
if (ml_flags & FLAGS_INPUT_COUNT)
ml_flags &= ~FLAGS_INPUT_COUNT;
else
ml_flags |= FLAGS_INPUT_COUNT;
continue;
} /* RAW_POUND */
/****** SCROLL MENU DOWN ****/
if (key == RAW_DOWN) {
/* menu active yet? */
if (!(ml_flags & FLAGS_MENU_ACTIVE)) { /* no */
/* get first two hostnames */
menu_active = doSCGetHostname(0,0);
menu_active += doSCGetHostname(1,1);
menu_idx += menu_active;
/* no hosts on card then nothing to do */
if (menu_active == 0) {
EE2LCD(0, 0, EE_NOHOSTS_ADDR, EE_NOHOSTS_LEN);
msg_powerdown();
}
/* display menu */
menuUpdate();
ml_flags |= FLAGS_MENU_ACTIVE;
} else { /* yes */
if (menu_cursor == 0) {
if (menu_active == 2) {
menu_cursor = 1;
menuUpdateCursor();
}
} else {
i = doSCGetHostname(menu_idx, 0);
if (i) {
i += doSCGetHostname(menu_idx+1, 1);
menu_active = i;
menu_idx += menu_active;
menu_cursor = 0;
menuUpdate();
}
}
} /* else */
/* next input */
continue;
} /* RAW_DOWN */
/****** SCROLL MENU UP ****/
if (key == RAW_UP) {
/* not valid until host menu active */
if (!(ml_flags & FLAGS_MENU_ACTIVE)) { /* no */
Beep(1);
continue;
}
if (menu_cursor == 1) {
menu_cursor = 0;
menuUpdateCursor();
} else {
if (menu_idx > 2) {
menu_idx = menu_idx - menu_active;
doSCGetHostname(menu_idx-2,0);
doSCGetHostname(menu_idx-1,1);
menu_active = 2;
menu_cursor = 1;
menuUpdate();
}
}
continue;
} /* RAW_UP */
/****** MENU ENTER ****/
if (key == RAW_ENTER) {
/* host menu active? */
if (!(ml_flags & FLAGS_MENU_ACTIVE)) { /* no */
/* index is first digit input or 0 if no digits input */
sc_idx = short_d0;
goto enter_shortcut;
} /* host menu not active yet */
/* index on smart card */
sc_idx = menu_idx - menu_active + menu_cursor;
/* challenge input? */
if ((obuf[menu_cursor] & OPTION_FLAG_CHALLENGE) ||
(ml_flags & FLAGS_INPUT_COUNT))
getCount();
/* GetHOTPCount32 command */
cmdSCGetHOTPCount32();
/* initiate SC transaction */
if (SCTransact() == 0) {
/*
* 2 byte resp (2) : 0,1
* NAD,PCB,LEN (3) : 2,3,4
* idx (1) : 5
* PIN (5) : 6,7,8,9,10
* count (4) : 11,12,13,14
* HOTP (5) : 15,16,17,18,19
*/
/* display hostname on top */
for (i = 0; i < 12; ++i)
dbuf[0][i] = dbuf[menu_cursor][i+3];
dbuf[0][12] = 0;
/* Binary/Hex HOTP format */
(obuf[menu_cursor] & OPTION_FLAG_FMT) ? fmt = 1 : fmt = 0;
/* display HOTP and maybe cycle to next system */
if (dispHOTP(fmt)) {
ClearLcd();
sc_idx ++;
goto enter_shortcut;
} /* dispHOTP() */
} else {
/* Failure */
Str2Lcd(0,0,"GHPC32:fail");
msg_powerdown();
} /* SC transaction */
/* start back to main screen */
menuInit();
/* next input */
continue;
} /* RAW_ENTER */
/****** CHANGE PIN ****/
if (key == RAW_STAR) {
while (1) {
ClearLcd();
EE2LCD(0, 0, EE_L1NEWPIN_ADDR, EE_L1NEWPIN_LEN);
EE2LCD(1, 0, EE_L2NEWPIN_ADDR, EE_L2NEWPIN_LEN);
i = EELen(EE_L2NEWPIN_ADDR, EE_L2NEWPIN_LEN);
getPIN(newPIN, i);
/* minimal checking, all digits equal not permitted */
if ((newPIN[0] == newPIN[1]) &&
(newPIN[1] == newPIN[2]) &&
(newPIN[2] == newPIN[3]) &&
(newPIN[3] == newPIN[4])) {
ClearLcd();
EE2LCD(0, 0, EE_TRYHARDER_ADDR, EE_TRYHARDER_LEN);
Beep(2);
keyGet();
continue;
}
EE2LCD(1, 0, EE_L3NEWPIN_ADDR, EE_L3NEWPIN_LEN);
i = EELen(EE_L3NEWPIN_ADDR, EE_L3NEWPIN_LEN);
getPIN(scratch_buf5, i);
/* make sure user entered it correctly */
if ((newPIN[0] == scratch_buf5[0]) &&
(newPIN[1] == scratch_buf5[1]) &&
(newPIN[2] == scratch_buf5[2]) &&
(newPIN[3] == scratch_buf5[3]) &&
(newPIN[4] == scratch_buf5[4]))
break; /* have valid new pin */
/* two did not match */
Beep(2);
} /* get new pin */
/* Set PIN command */
cmdSCSetPIN();
/* Initiate smart card transaction */
if (SCTransact() == 0) {
/* success */
ClearLcd();
EE2LCD(0, 0, EE_PINCHANGED_ADDR, EE_PINCHANGED_LEN);
myPIN[0] = newPIN[0]; myPIN[1] = newPIN[1];
myPIN[2] = newPIN[2]; myPIN[3] = newPIN[3];
myPIN[4] = newPIN[4];
} else {
/* Failure */
Str2Lcd(0,0,"SetPIN:fail");
msg_powerdown();
}
/* go back to initial screen */
ml_flags |= FLAGS_SCREEN0_UPDATE;
/* any key to continue */
keyGet();
/* success / next input */
continue;
} /* RAW_STAR / CHANGE_PIN */
/***** CLEAN INPUT DIGITS */
if (key == RAW_CANCEL) {
short_d0 = 0;
ml_flags &= ~FLAGS_MENU_SHORT_D0;
continue;
} /* RAW_CANCEL */
/****** MENU SHORTCUT WITH DIGIT ENTRY ***** */
/*
* require two digit host index
*/
/* convert raw keypress to 0..9 */
keyDecodeNumber();
/* any keys input not 0..9 are no longer valid */
if (!key_num) {
Beep(1);
continue;
}
/* first digit? */
if (!(ml_flags & FLAGS_MENU_SHORT_D0)) {
/* store first digit */
short_d0 = key_num - '0';
/* first digit input success */
ml_flags |= FLAGS_MENU_SHORT_D0;
} else {
/* 2nd digit triggers HOTP generation */
/* sc_idx = short_d0*10+d1 */
sc_idx = short_d0 <<3;
sc_idx += short_d0;
sc_idx += short_d0;
sc_idx += (key_num - '0');
enter_shortcut:
/* the next sequential HOTP can be selected with the down arrow */
while (1) {
/* input count first? */
if (ml_flags & FLAGS_INPUT_COUNT)
getCount();
/* GetHOTPHostCount32 command */
cmdSCGetHOTPHostCount32();
/* initiate SC transaction */
if (SCTransact() == 0) {
/*
* 2 byte resp (2) : 0,1
* NAD,PCB,LEN (3) : 2,3,4
* idx (1) : 5
* PIN (5) : 6,7,8,9,10
* count (4) : 11,12,13,14
* HOTP (5) : 15,16,17,18,19
* HostName(12) : 20..31
*/
/* skip display for empty hostname */
if (Buf[20] != 0) {
/* display hostname on top */
for (i = 0; i < 12; ++i)
dbuf[0][i] = (Buf[20+i]&0x7F);
dbuf[0][12] = 0;
/* Binary/Hex HOTP format */
(Buf[20+HOSTNAME_POS_FMT] & HOSTNAME_FLAG_MASK) ? fmt = 1 : fmt = 0;
/* display HOTP and maybe cycle to next system */
if(dispHOTP(fmt)) {
sc_idx ++;
ClearLcd();
continue;
} else {
break; /* done */
}
} else {
Str2Lcd(0,0,"GHPHC32:empt");
/* fatal */
msg_powerdown();
} /* hostname not empty */
} else {
/* Failure */
Str2Lcd(0,0,"GHPHC32:fail");
/* fatal */
msg_powerdown();
} /* SC transaction */
} /* while 1 */
/* initialize for main screen input */
menuInit();
} /* digit */
/* next input */
continue;
} /* main key loop */
powerdown();
} /* main */
void getCount(void)
{
U32 tmp32u;
U8 pos;
/* prime loop */
key = RAW_CANCEL;
/* LCD output string */
scratch_buf5[1] = 0;
/* init to 0 */
sc_count = 0;
while (1) {
if (key == RAW_CANCEL) {
ClearLcd();
EE2LCD(0, 0, EE_CHALLENGE_ADDR, EE_CHALLENGE_LEN);
sc_count = 0;
pos = 0;
goto next_key;
}
/* done? */
if (key == RAW_ENTER)
break;
keyDecodeNumber();
/* only accept digits */
if (key_num == 0) {
Beep(1);
goto next_key;
}
/* 2^32-1 is 10 digits */
if (pos >= 10) {
Beep(1);
goto next_key;
}
scratch_buf5[0] = key_num;
Str2Lcd(1,pos,scratch_buf5);
/* drop leading 0's */
if ((pos == 0) && (key_num == '0'))
goto next_key;
/* ignore potential overflow from user input, not meaningful */
tmp32u = (sc_count<<3); /* *8 */
tmp32u += (sc_count<<1); /* +*2 or *10 */
tmp32u += (key_num - '0'); /* + new digit */
sc_count = tmp32u;
++pos;
next_key:
keyGet();
} /* get count input */
} /* getCount */
/*
* function: getPIN()
*
* Get PIN from user.
* dest = 0 Store in myPIN
* dest = 1 Store in newPIN
*
* return 0 good
* 1 fail
*/
U8 getPIN(U8 *dest, U8 pos)
{
U8 i;
i = 0;
while (1) {
/* get a single key */
keyGet();
/* Enter is valid when 5 digits have been entered */
if (key == RAW_ENTER && i == 5)
break;
if ((key == RAW_POUND) && (i == 1) &&
(dest[0] == '3'))
return 1;
/* Clear entry */
if (key == RAW_CANCEL) {
Str2Lcd(1,pos," ");
i = 0;
continue;
}
/* convert keycode to ASCII */
keyDecodeNumber();
/* else if pin not full and valid digit */
if (i < 5 && key_num) {
Str2Lcd(1,i+pos,"*");
dest[i++] = key_num;
} else {
Beep(1);
}
} /* while */
return 0;
} /* get_pin */
void keyGet(void)
{
if (GetRawKey(Resp))
powerdown();
key = *Resp->data;
} /* keyGet */
/*
* function: keyDecodeNumber()
*
* decode ASCII code for Spyrus keycode 0..9
* else 0
*/
void keyDecodeNumber (void)
{
if (key == RAW0)
key_num = '0';
else if (key == RAW1)
key_num = '1';
else if (key == RAW2)
key_num = '2';
else if (key == RAW3)
key_num = '3';
else if (key == RAW4)
key_num = '4';
else if (key == RAW5)
key_num = '5';
else if (key == RAW6)
key_num = '6';
else if (key == RAW7)
key_num = '7';
else if (key == RAW8)
key_num = '8';
else if (key == RAW9)
key_num = '9';
else
key_num = 0;
} /* keyDecodeNumber */
/*
* function: hexdigit()
*
* return a hex digit in ASCII
*/
U8 hexdigit(U8 d)
{
if (d < 10)
return d + '0';
return d + 'A' - 10;
} /* hexdigit */
/*
* function: cmdCsum()
*
* perform ISO checksum calculation on Buf
*/
void cmdCsum(void)
{
U8 k, l;
l = 29+sc_cmdLen;
for (k = 30; k < l; ++k)
Buf[l] = Buf[l] ^ Buf[k];
} /* cmdCsum */
void cmdSCTestPIN(void)
{
Buf[30] = 0x00; /* NAD */
Buf[31] = 0x00; /* PCB */
Buf[32] = 0x0B; /* LEN */
Buf[33] = SC_TESTPIN_CLA; /* CLA */
Buf[34] = SC_TESTPIN_INS; /* INS */
Buf[35] = 0x00; /* P1 */
Buf[36] = 0x00; /* P2 */
Buf[37] = 0x05; /* DATA LEN */
Buf[38] = myPIN[0]; /* PIN[0] */
Buf[39] = myPIN[1]; /* PIN[1] */
Buf[40] = myPIN[2]; /* PIN[2] */
Buf[41] = myPIN[3]; /* PIN[3] */
Buf[42] = myPIN[4]; /* PIN[4] */
Buf[43] = 0x05; /* Expected response size */
Buf[44] = 0; /* CSUM */
sc_cmdLen = (44-30) + 1;
cmdCsum();
} /* cmdSCTestPIN */
void cmdSCSetPIN(void)
{
Buf[30] = 0x00; /* NAD */
Buf[31] = 0x00; /* PCB */
Buf[32] = 0x10; /* LEN */
Buf[33] = SC_SETPIN_CLA; /* CLA */
Buf[34] = SC_SETPIN_INS; /* INS */
Buf[35] = 0x00; /* P1 */
Buf[36] = 0x00; /* P2 */
Buf[37] = 0x0A; /* DATA LEN */
Buf[38] = myPIN[0]; /* PIN */
Buf[39] = myPIN[1]; /* PIN */
Buf[40] = myPIN[2]; /* PIN */
Buf[41] = myPIN[3]; /* PIN */
Buf[42] = myPIN[4]; /* PIN */
Buf[43] = newPIN[0]; /* newPIN */
Buf[44] = newPIN[1]; /* newPIN */
Buf[45] = newPIN[2]; /* newPIN */
Buf[46] = newPIN[3]; /* newPIN */
Buf[47] = newPIN[4]; /* newPIN */
Buf[48] = 0x0A; /* Expected response size */
Buf[49] = 0; /* CSUM */
sc_cmdLen = (49-30) + 1; /* DATA_LEN + 4 */
cmdCsum();
} /* cmdSCSetPIN */
void cmdSCGetHOTPHostCount32(void)
{
U8 i;
Buf[30] = 0x00; /* NAD */
Buf[31] = 0x00; /* PCB */
Buf[32] = 21; /* LEN (DATA_LEN + 6) */
Buf[33] = SC_GETHOTPHOSTCOUNT32_CLA; /* CLA */
Buf[34] = SC_GETHOTPHOSTCOUNT32_INS; /* INS */
Buf[35] = 0x00; /* P1 */
Buf[36] = 0x00; /* P2 */
Buf[37] = 15; /* DATA LEN 1+5+4+5+0 */
Buf[38] = sc_idx; /* Index */
Buf[39] = myPIN[0]; /* PIN[0] */
Buf[40] = myPIN[1]; /* PIN[1] */
Buf[41] = myPIN[2]; /* PIN[2] */
Buf[42] = myPIN[3]; /* PIN[3] */
Buf[43] = myPIN[4]; /* PIN[4] */
Buf[44] = sc_countp[3]; /* COUNT */
Buf[45] = sc_countp[2]; /* COUNT */
Buf[46] = sc_countp[1]; /* COUNT */
Buf[47] = sc_countp[0]; /* COUNT */
/* 48..52 /* ReaderPIN */
Buf[53] = 27; /* Expected response size 1+5+4+5+12*/
Buf[54] = 0; /* CSUM */
sc_cmdLen = (54-30) + 1; /* DATA_LEN + 4 */
for (i = 0; i < EE_READER_KEY_LEN; ++i)
Buf[48+i] = EEPROM_READ(EE_READER_KEY_ADDR+i);
cmdCsum();
} /* cmdSCGetHOTPHostCount32 */
void cmdSCGetHOTPCount32(void)
{
U8 i;
Buf[30] = 0x00; /* NAD */
Buf[31] = 0x00; /* PCB */
Buf[32] = 21; /* LEN (DATA_LEN + 6) */
Buf[33] = SC_GETHOTPCOUNT32_CLA; /* CLA */
Buf[34] = SC_GETHOTPCOUNT32_INS; /* INS */
Buf[35] = 0x00; /* P1 */
Buf[36] = 0x00; /* P2 */
Buf[37] = 15; /* DATA LEN 1+5+4+5 */
Buf[38] = sc_idx; /* Index */
Buf[39] = myPIN[0]; /* PIN[0] */
Buf[40] = myPIN[1]; /* PIN[1] */
Buf[41] = myPIN[2]; /* PIN[2] */
Buf[42] = myPIN[3]; /* PIN[3] */
Buf[43] = myPIN[4]; /* PIN[4] */
Buf[44] = sc_countp[3]; /* COUNT */
Buf[45] = sc_countp[2]; /* COUNT */
Buf[46] = sc_countp[1]; /* COUNT */
Buf[47] = sc_countp[0]; /* COUNT */
/* 48..52 /* ReaderPIN */
Buf[53] = 15; /* Expected response size 1+5+4+5*/
Buf[54] = 0; /* CSUM */
sc_cmdLen = (54-30) + 1; /* DATA_LEN + 4 */
for (i = 0; i < EE_READER_KEY_LEN; ++i)
Buf[48+i] = EEPROM_READ(EE_READER_KEY_ADDR+i);
cmdCsum();
} /* cmdSCGetHOTPCount32 */
void cmdSCGetSpyrusEEBlock(U8 i)
{
Buf[30] = 0x00; /* NAD */
Buf[31] = 0x00; /* PCB */
Buf[32] = 7; /* LEN DATA_LEN + 6)*/
Buf[33] = SC_GETSPYRUSEEBLOCK_CLA; /* CLA */
Buf[34] = SC_GETSPYRUSEEBLOCK_INS; /* INS */
Buf[35] = 0x00; /* P1 */
Buf[36] = 0x00; /* P2 */
Buf[37] = 1; /* DATA LEN 1 */
Buf[38] = i; /* index */
Buf[39] = 17; /* Expected response size 1+16 */
Buf[40] = 0; /* CSUM */
sc_cmdLen = (40-30) + 1;
cmdCsum();
} /* cmdSCGetSpyrusEEBlock */
/*
* function: SCTransact()
*
* return codes:
* 0 : success
* 1 : no card
* 2 : access denied
* 9 : fatal (will not return)
*/
U8 SCTransact(void)
{
U8 r, x1, x2;
if (CardPowerOn(Resp)) {
ClearLcd();
EE2LCD(0, 0, EE_NOCARD_ADDR, EE_NOCARD_LEN);
CardPowerOff();
r = 1; /* no card */
goto SCTransact_err2;
}
r = SendRawCmd(ICC_CMD, sc_cmdLen, &Buf[30], Resp);
CardPowerOff();
/* fatal error? bail with CLA,INS */
if ((r != BLOCK_RESP) || (Resp->len < 3)) {
x1 = Buf[33]; /* CLA */
x2 = Buf[34]; /* INS */
r = 9; /* fatal error */
ClearLcd();
Str2Lcd(0,0,"Err CLA:INS");
goto SCTransact_err;
}
x1 = Resp->data[Resp->len - 3]; /* SW1 */
x2 = Resp->data[Resp->len - 2]; /* SW2 */
if (x1 == 0x90 && x2 == 0x00)
return 0; /* success */
ClearLcd();
if (x1 == 0x66 && x2 == 0xC7) {
EE2LCD(0, 0, EE_L1LOCKED_ADDR, EE_L1LOCKED_LEN);
EE2LCD(1, 0, EE_L2LOCKED_ADDR, EE_L1LOCKED_LEN);
r = 9; /* fatal error */
goto SCTransact_err2;
}
if (x1 == 0x69 && x2 == 0xC2) {
EE2LCD(0, 0, EE_L1ACCESS_DENY_ADDR, EE_L1ACCESS_DENY_LEN);
EE2LCD(1, 0, EE_L2ACCESS_DENY_ADDR, EE_L2ACCESS_DENY_LEN);
r = 2; /* access denied */
goto SCTransact_err2;
}
Str2Lcd(0,0,"Err SW1:SW2");
/* error */
SCTransact_err:
scratch_buf5[0] = hexdigit(x1>>4);
scratch_buf5[1] = hexdigit(x1 & 0x0F);
scratch_buf5[2] = hexdigit(x2>>4);
scratch_buf5[3] = hexdigit(x2 & 0x0F);
scratch_buf5[4] = 0;
Str2Lcd(1,0,scratch_buf5);
/* get any key */
SCTransact_err2:
keyGet();
ClearLcd();
/* return other than fatal */
if (r != 9)
return r;
powerdown();
return r; /* unused */
} /* SCTransact */
/*
* function: doSCGetHostname()
*
* grab a single hostname with index i from the card. store in dbuf position j
*
* returns 1 if hostname is retrieved, else 0.
*/
U8 doSCGetHostname(U8 idx, U8 row)
{
U8 k;
Buf[30] = 0x00; /* NAD */
Buf[31] = 0x00; /* PCB */
Buf[32] = 12; /* LEN DATA_LEN + 6 */
Buf[33] = SC_GETHOSTNAME_CLA; /* CLA */
Buf[34] = SC_GETHOSTNAME_INS; /* INS */
Buf[35] = 0x00; /* P1 */
Buf[36] = 0x00; /* P2 */
Buf[37] = 6; /* DATA LEN (1+5) */
Buf[38] = idx; /* index */
Buf[39] = myPIN[0]; /* PIN[0] */
Buf[40] = myPIN[1]; /* PIN[1] */
Buf[41] = myPIN[2]; /* PIN[2] */
Buf[42] = myPIN[3]; /* PIN[3] */
Buf[43] = myPIN[4]; /* PIN[4] */
Buf[44] = 18; /* Expected response size 1+5+12 */
Buf[45] = 0; /* CSUM */
sc_cmdLen = (45-30) + 1; /* DATA_LEN + 4 */
cmdCsum();
/*
* 2 byte resp (2) : 0,1
* NAD,PCB,LEN (3) : 2,3,4
* idx (1) : 5
* PIN (5) : 6,7,8,9,10
* HostName(12) : 11,12,13,14,15,16,17,18,19,20,21,22
*/
if (SCTransact() == 0) {
/* success */
/* high bit set on first character signals challenge required */
if (Buf[11+HOSTNAME_POS_CHALLENGE] & HOSTNAME_FLAG_MASK)
obuf[row] = OPTION_FLAG_CHALLENGE;
else
obuf[row] = 0;
if (Buf[11+HOSTNAME_POS_FMT] & HOSTNAME_FLAG_MASK)
obuf[row] |= OPTION_FLAG_FMT;
/* empty hostname is last */
if (Buf[11] == 0)
return 0;
/* copy hostname to display buffer */
for (k = 3; k < 15; ++k)
dbuf[row][k] = (Buf[k+8] & 0x7F);
dbuf[row][0] = hexdigit(idx>>4);
dbuf[row][1] = hexdigit(idx&0x0F);
dbuf[row][2] = ':';
dbuf[row][12] = 0;
return 1;
} else {
Str2Lcd(0,0,"GHN:fail");
msg_powerdown();
}
return 0; /* notreached */
} /* doSCGetHostname */
void msg_powerdown(void)
{
GetRawKey(Resp);
DeactivateRdr();
} /* off */
void powerdown(void)
{
DeactivateRdr();
}
void menuUpdate(void)
{
ClearLcd();
Str2Lcd(0,0,&dbuf[0][0]);
if (menu_active == 2)
Str2Lcd(1,0,&dbuf[1][0]);
menuUpdateCursor();
} /* menuUpdate() */
/*
* function: menuUpdateCursor()
*
* Update menu_cursor based on menu_cursor variable
*/
void menuUpdateCursor(void)
{
if (menu_cursor == 0) {
Str2Lcd(0,2,">");
if (menu_active == 2)
Str2Lcd(1,2,":");
} else {
Str2Lcd(0,2,":");
if (menu_active == 2)
Str2Lcd(1,2,">");
}
} /* menuUpdateCursor() */
U8 dispHOTP(U8 fmt)
{
U8 i, j, c;
U32 u32;
char *s;
if (fmt == 0) { /* HEX */
for (i = 0, j = 0; i < 5; ++i) {
c = Buf[15+i];
dbuf[1][j++] = hexdigit(c>>4);
dbuf[1][j++] = hexdigit(c&0x0F);
}
dbuf[1][j] = 0;
} else { /* decimal */
s = (char*)&u32;
s[3] = Buf[15];
s[2] = Buf[16];
s[1] = Buf[17];
s[0] = Buf[18];
s = Buf; /* starts at Buf+1 */
do {
*++s = u32 % 10 + '0';
} while ((u32 /= 10) > 0);
for (i = 0; s != Buf; --s, ++i)
dbuf[1][i] = *s;
dbuf[1][i] = 0;
}
/*
* note the following code will not compile properly. certain
* bits are Xor'd
* .X.X.X.X.X (X is nybble with flipped bit)
* 74bfe44b40 (generated)
* 73BCE44D4C (correct)
*
* for (i = 0, j = 0; i < 5; ++i) {
* c = Buf[15+i] >> 4;
* dbuf[1][j++] = hexdigit(c);
* c = Buf[15+i] &0x0F
* dbuf[1][j++] = hexdigit(c);
* }
*/
/* display hostname and HOTP */
ClearLcd();
Str2Lcd(0,0,&dbuf[0][0]);
Str2Lcd(1,1,&dbuf[1][0]);
/* any key to continue ~ 10 seconds each, jump out on a key */
for (i = 0, j = 0; i < 3; ++i) {
if (!GetRawKey(Resp)) {
j = 1;
break;
}
}
if (j == 1) {
key = *Resp->data;
if (key == RAW_DOWN)
return 1; /* again */
else
return 0;
}
/* timeout */
powerdown();
return 0; /* unreached */
} /* dispHOTP */
void menuInit(void)
{
/* initial input screen / no menu activated yet */
ml_flags = FLAGS_SCREEN0_UPDATE;
/* smart card index */
sc_idx = 0;
/* menu cursor */
menu_cursor = 0;
/* SC HOTP count is 0 (default ) */
sc_count = 0;
/* first digit if hit enter with host menu not enabled */
short_d0 = 0;
/* menu index */
menu_idx = 0;
} /* menuInit() */
void EEInit(void)
{
U8 i, c, match;
match = 0;
/* Check if EEProm is initialized */
for (i = EE_MAGIC_ADDR; i < EE_MAGIC_LEN; ++i) {
c = EEDefault[i];
if (EEPROM_READ(i) == c)
++match;
}
/* initialized? */
if (match == 3)
return;
/* no, copy in default data */
for (i = 0; i < EE_INIT_SIZE; ++i) {
c = EEDefault[i];
EEPROM_WRITE(i, c);
}
/* wait for last write to complete */
while (WR)
continue;
} /* EEInit */
U8 EELen(U8 addr, U8 len)
{
U8 i, c;
for (i = 0; i < len; ++i) {
c = EEPROM_READ(addr);
if ((c == 0) || (c == ' '))
break;
++addr;
}
/* max hpos of LCD */
if (i > 11)
i = 11;
return i;
} /* EELen */
Reference in a new issue View git blame Copy permalink