bcload 1 bcload ZeitControl Firmware downloader for enhanced BasicCard Smart Cards bcload -?hlptv? -d debug_level -f fname -r reader The bcload command is a firmware downloader for ZeitControl BasicCard Smart Cards. Bcload is based off the bcload example included in the development environment. Bcload has only been tested with ZC3.9 Smart Card hardware. Small changes would be required to support the Professional line of cards. -d, --debug= debug_level Set debug level. -f, --image= fname Name of BasicCard Image file. Defaults to HOTPC.IMG -h, --help Help. -l, --list-readers List SC Readers -p, --no-paranoid Disable paranoid check for ZC3.9 hardware. Enhanced Smart Cards will probably work, support for the professional cards require changes to bcload.c. -r, --reader= reader Set Smart Card reader. Use -l to list available readers. A reader is defined as class:reader:option. PCSC and embedded are the two available classes. The embedded class contains the acr30s driver which is specified as embedded:acr30s:serial_port. If pcscd is running the first PC/SC reader will be the default followed by the embedded acr30s driver. Use PCSC: for the first available PC/SC reader. Use embedded:acr30s:/dev/cuaU0 for the embedded acr30s driver with serial port /dev/cuaU0. -t, --force-test Force card mode to TEST after programming. Defaults to the mode specified in the image file. -v, --verbose Display verbose status messages while programming the card. --version Display software version. Download the HOTPC.IMG file to the default Smart Card reader. Display verbose results. bcload -v -f HOTPC.IMG Card/State: ZC3.9 test EEChunkSize=2000 BCSetState: load SC: Reset EEStart=8020,EELen=1fa0 imgAddr=8020,imgLen=1fa0 Clear: addr=8020,len=1fa0 BCClearEEProm: success SC: Reset EEWRITE: nWrites=118,addr=8020,len=1e EEWRITE: nWrites=117,addr=8038,len=10 EEWRITE: nWrites=116,addr=8170,len=38 ... EEWRITE: nWrites=1,addr=9f40,len=48 EEWRITE: nWrites=0,addr=9f80,len=48 EECRC: nWrites=1,addr=8020,len=1fa0,imgCRC=b17a EECRC: SCCRC=b17a EECRC: nWrites=0,addr=8020,len=00,imgCRC=00 EECRC: SCCRC=0 BCSetState: test BCSetState: test Mark Fullmer maf@splintered.net otp-control(1) otp-sca(1) otp-sct(1) pam_otp(1) htsoft-downloader(1) otp-ov-plugin(1) urd(1) spyrus-par2(7)