mirror of
https://github.com/adulau/aha.git
synced 2024-12-30 20:56:23 +00:00
51ef9c57f0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4920 lines
124 KiB
C
4920 lines
124 KiB
C
/*
|
|
* $Id: synclink_gt.c,v 4.50 2007/07/25 19:29:25 paulkf Exp $
|
|
*
|
|
* Device driver for Microgate SyncLink GT serial adapters.
|
|
*
|
|
* written by Paul Fulghum for Microgate Corporation
|
|
* paulkf@microgate.com
|
|
*
|
|
* Microgate and SyncLink are trademarks of Microgate Corporation
|
|
*
|
|
* This code is released under the GNU General Public License (GPL)
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* DEBUG OUTPUT DEFINITIONS
|
|
*
|
|
* uncomment lines below to enable specific types of debug output
|
|
*
|
|
* DBGINFO information - most verbose output
|
|
* DBGERR serious errors
|
|
* DBGBH bottom half service routine debugging
|
|
* DBGISR interrupt service routine debugging
|
|
* DBGDATA output receive and transmit data
|
|
* DBGTBUF output transmit DMA buffers and registers
|
|
* DBGRBUF output receive DMA buffers and registers
|
|
*/
|
|
|
|
#define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
|
|
#define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
|
|
#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
|
|
#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
|
|
#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
|
|
//#define DBGTBUF(info) dump_tbufs(info)
|
|
//#define DBGRBUF(info) dump_rbufs(info)
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/major.h>
|
|
#include <linux/string.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/termios.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/hdlc.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/types.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "linux/synclink.h"
|
|
|
|
#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
|
|
#define SYNCLINK_GENERIC_HDLC 1
|
|
#else
|
|
#define SYNCLINK_GENERIC_HDLC 0
|
|
#endif
|
|
|
|
/*
|
|
* module identification
|
|
*/
|
|
static char *driver_name = "SyncLink GT";
|
|
static char *driver_version = "$Revision: 4.50 $";
|
|
static char *tty_driver_name = "synclink_gt";
|
|
static char *tty_dev_prefix = "ttySLG";
|
|
MODULE_LICENSE("GPL");
|
|
#define MGSL_MAGIC 0x5401
|
|
#define MAX_DEVICES 32
|
|
|
|
static struct pci_device_id pci_table[] = {
|
|
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
|
|
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
|
|
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
|
|
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
|
|
{0,}, /* terminate list */
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, pci_table);
|
|
|
|
static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
|
|
static void remove_one(struct pci_dev *dev);
|
|
static struct pci_driver pci_driver = {
|
|
.name = "synclink_gt",
|
|
.id_table = pci_table,
|
|
.probe = init_one,
|
|
.remove = __devexit_p(remove_one),
|
|
};
|
|
|
|
static int pci_registered;
|
|
|
|
/*
|
|
* module configuration and status
|
|
*/
|
|
static struct slgt_info *slgt_device_list;
|
|
static int slgt_device_count;
|
|
|
|
static int ttymajor;
|
|
static int debug_level;
|
|
static int maxframe[MAX_DEVICES];
|
|
static int dosyncppp[MAX_DEVICES];
|
|
|
|
module_param(ttymajor, int, 0);
|
|
module_param(debug_level, int, 0);
|
|
module_param_array(maxframe, int, NULL, 0);
|
|
module_param_array(dosyncppp, int, NULL, 0);
|
|
|
|
MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
|
|
MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
|
|
MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
|
|
MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable");
|
|
|
|
/*
|
|
* tty support and callbacks
|
|
*/
|
|
static struct tty_driver *serial_driver;
|
|
|
|
static int open(struct tty_struct *tty, struct file * filp);
|
|
static void close(struct tty_struct *tty, struct file * filp);
|
|
static void hangup(struct tty_struct *tty);
|
|
static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
|
|
|
|
static int write(struct tty_struct *tty, const unsigned char *buf, int count);
|
|
static void put_char(struct tty_struct *tty, unsigned char ch);
|
|
static void send_xchar(struct tty_struct *tty, char ch);
|
|
static void wait_until_sent(struct tty_struct *tty, int timeout);
|
|
static int write_room(struct tty_struct *tty);
|
|
static void flush_chars(struct tty_struct *tty);
|
|
static void flush_buffer(struct tty_struct *tty);
|
|
static void tx_hold(struct tty_struct *tty);
|
|
static void tx_release(struct tty_struct *tty);
|
|
|
|
static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
|
|
static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
|
|
static int chars_in_buffer(struct tty_struct *tty);
|
|
static void throttle(struct tty_struct * tty);
|
|
static void unthrottle(struct tty_struct * tty);
|
|
static void set_break(struct tty_struct *tty, int break_state);
|
|
|
|
/*
|
|
* generic HDLC support and callbacks
|
|
*/
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
|
|
static void hdlcdev_tx_done(struct slgt_info *info);
|
|
static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
|
|
static int hdlcdev_init(struct slgt_info *info);
|
|
static void hdlcdev_exit(struct slgt_info *info);
|
|
#endif
|
|
|
|
|
|
/*
|
|
* device specific structures, macros and functions
|
|
*/
|
|
|
|
#define SLGT_MAX_PORTS 4
|
|
#define SLGT_REG_SIZE 256
|
|
|
|
/*
|
|
* conditional wait facility
|
|
*/
|
|
struct cond_wait {
|
|
struct cond_wait *next;
|
|
wait_queue_head_t q;
|
|
wait_queue_t wait;
|
|
unsigned int data;
|
|
};
|
|
static void init_cond_wait(struct cond_wait *w, unsigned int data);
|
|
static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
|
|
static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
|
|
static void flush_cond_wait(struct cond_wait **head);
|
|
|
|
/*
|
|
* DMA buffer descriptor and access macros
|
|
*/
|
|
struct slgt_desc
|
|
{
|
|
__le16 count;
|
|
__le16 status;
|
|
__le32 pbuf; /* physical address of data buffer */
|
|
__le32 next; /* physical address of next descriptor */
|
|
|
|
/* driver book keeping */
|
|
char *buf; /* virtual address of data buffer */
|
|
unsigned int pdesc; /* physical address of this descriptor */
|
|
dma_addr_t buf_dma_addr;
|
|
};
|
|
|
|
#define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
|
|
#define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
|
|
#define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
|
|
#define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
|
|
#define desc_count(a) (le16_to_cpu((a).count))
|
|
#define desc_status(a) (le16_to_cpu((a).status))
|
|
#define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
|
|
#define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
|
|
#define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
|
|
#define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
|
|
#define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
|
|
|
|
struct _input_signal_events {
|
|
int ri_up;
|
|
int ri_down;
|
|
int dsr_up;
|
|
int dsr_down;
|
|
int dcd_up;
|
|
int dcd_down;
|
|
int cts_up;
|
|
int cts_down;
|
|
};
|
|
|
|
/*
|
|
* device instance data structure
|
|
*/
|
|
struct slgt_info {
|
|
void *if_ptr; /* General purpose pointer (used by SPPP) */
|
|
|
|
struct slgt_info *next_device; /* device list link */
|
|
|
|
int magic;
|
|
int flags;
|
|
|
|
char device_name[25];
|
|
struct pci_dev *pdev;
|
|
|
|
int port_count; /* count of ports on adapter */
|
|
int adapter_num; /* adapter instance number */
|
|
int port_num; /* port instance number */
|
|
|
|
/* array of pointers to port contexts on this adapter */
|
|
struct slgt_info *port_array[SLGT_MAX_PORTS];
|
|
|
|
int count; /* count of opens */
|
|
int line; /* tty line instance number */
|
|
unsigned short close_delay;
|
|
unsigned short closing_wait; /* time to wait before closing */
|
|
|
|
struct mgsl_icount icount;
|
|
|
|
struct tty_struct *tty;
|
|
int timeout;
|
|
int x_char; /* xon/xoff character */
|
|
int blocked_open; /* # of blocked opens */
|
|
unsigned int read_status_mask;
|
|
unsigned int ignore_status_mask;
|
|
|
|
wait_queue_head_t open_wait;
|
|
wait_queue_head_t close_wait;
|
|
|
|
wait_queue_head_t status_event_wait_q;
|
|
wait_queue_head_t event_wait_q;
|
|
struct timer_list tx_timer;
|
|
struct timer_list rx_timer;
|
|
|
|
unsigned int gpio_present;
|
|
struct cond_wait *gpio_wait_q;
|
|
|
|
spinlock_t lock; /* spinlock for synchronizing with ISR */
|
|
|
|
struct work_struct task;
|
|
u32 pending_bh;
|
|
int bh_requested;
|
|
int bh_running;
|
|
|
|
int isr_overflow;
|
|
int irq_requested; /* nonzero if IRQ requested */
|
|
int irq_occurred; /* for diagnostics use */
|
|
|
|
/* device configuration */
|
|
|
|
unsigned int bus_type;
|
|
unsigned int irq_level;
|
|
unsigned long irq_flags;
|
|
|
|
unsigned char __iomem * reg_addr; /* memory mapped registers address */
|
|
u32 phys_reg_addr;
|
|
int reg_addr_requested;
|
|
|
|
MGSL_PARAMS params; /* communications parameters */
|
|
u32 idle_mode;
|
|
u32 max_frame_size; /* as set by device config */
|
|
|
|
unsigned int raw_rx_size;
|
|
unsigned int if_mode;
|
|
|
|
/* device status */
|
|
|
|
int rx_enabled;
|
|
int rx_restart;
|
|
|
|
int tx_enabled;
|
|
int tx_active;
|
|
|
|
unsigned char signals; /* serial signal states */
|
|
int init_error; /* initialization error */
|
|
|
|
unsigned char *tx_buf;
|
|
int tx_count;
|
|
|
|
char flag_buf[MAX_ASYNC_BUFFER_SIZE];
|
|
char char_buf[MAX_ASYNC_BUFFER_SIZE];
|
|
BOOLEAN drop_rts_on_tx_done;
|
|
struct _input_signal_events input_signal_events;
|
|
|
|
int dcd_chkcount; /* check counts to prevent */
|
|
int cts_chkcount; /* too many IRQs if a signal */
|
|
int dsr_chkcount; /* is floating */
|
|
int ri_chkcount;
|
|
|
|
char *bufs; /* virtual address of DMA buffer lists */
|
|
dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
|
|
|
|
unsigned int rbuf_count;
|
|
struct slgt_desc *rbufs;
|
|
unsigned int rbuf_current;
|
|
unsigned int rbuf_index;
|
|
|
|
unsigned int tbuf_count;
|
|
struct slgt_desc *tbufs;
|
|
unsigned int tbuf_current;
|
|
unsigned int tbuf_start;
|
|
|
|
unsigned char *tmp_rbuf;
|
|
unsigned int tmp_rbuf_count;
|
|
|
|
/* SPPP/Cisco HDLC device parts */
|
|
|
|
int netcount;
|
|
int dosyncppp;
|
|
spinlock_t netlock;
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
struct net_device *netdev;
|
|
#endif
|
|
|
|
};
|
|
|
|
static MGSL_PARAMS default_params = {
|
|
.mode = MGSL_MODE_HDLC,
|
|
.loopback = 0,
|
|
.flags = HDLC_FLAG_UNDERRUN_ABORT15,
|
|
.encoding = HDLC_ENCODING_NRZI_SPACE,
|
|
.clock_speed = 0,
|
|
.addr_filter = 0xff,
|
|
.crc_type = HDLC_CRC_16_CCITT,
|
|
.preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
|
|
.preamble = HDLC_PREAMBLE_PATTERN_NONE,
|
|
.data_rate = 9600,
|
|
.data_bits = 8,
|
|
.stop_bits = 1,
|
|
.parity = ASYNC_PARITY_NONE
|
|
};
|
|
|
|
|
|
#define BH_RECEIVE 1
|
|
#define BH_TRANSMIT 2
|
|
#define BH_STATUS 4
|
|
#define IO_PIN_SHUTDOWN_LIMIT 100
|
|
|
|
#define DMABUFSIZE 256
|
|
#define DESC_LIST_SIZE 4096
|
|
|
|
#define MASK_PARITY BIT1
|
|
#define MASK_FRAMING BIT0
|
|
#define MASK_BREAK BIT14
|
|
#define MASK_OVERRUN BIT4
|
|
|
|
#define GSR 0x00 /* global status */
|
|
#define JCR 0x04 /* JTAG control */
|
|
#define IODR 0x08 /* GPIO direction */
|
|
#define IOER 0x0c /* GPIO interrupt enable */
|
|
#define IOVR 0x10 /* GPIO value */
|
|
#define IOSR 0x14 /* GPIO interrupt status */
|
|
#define TDR 0x80 /* tx data */
|
|
#define RDR 0x80 /* rx data */
|
|
#define TCR 0x82 /* tx control */
|
|
#define TIR 0x84 /* tx idle */
|
|
#define TPR 0x85 /* tx preamble */
|
|
#define RCR 0x86 /* rx control */
|
|
#define VCR 0x88 /* V.24 control */
|
|
#define CCR 0x89 /* clock control */
|
|
#define BDR 0x8a /* baud divisor */
|
|
#define SCR 0x8c /* serial control */
|
|
#define SSR 0x8e /* serial status */
|
|
#define RDCSR 0x90 /* rx DMA control/status */
|
|
#define TDCSR 0x94 /* tx DMA control/status */
|
|
#define RDDAR 0x98 /* rx DMA descriptor address */
|
|
#define TDDAR 0x9c /* tx DMA descriptor address */
|
|
|
|
#define RXIDLE BIT14
|
|
#define RXBREAK BIT14
|
|
#define IRQ_TXDATA BIT13
|
|
#define IRQ_TXIDLE BIT12
|
|
#define IRQ_TXUNDER BIT11 /* HDLC */
|
|
#define IRQ_RXDATA BIT10
|
|
#define IRQ_RXIDLE BIT9 /* HDLC */
|
|
#define IRQ_RXBREAK BIT9 /* async */
|
|
#define IRQ_RXOVER BIT8
|
|
#define IRQ_DSR BIT7
|
|
#define IRQ_CTS BIT6
|
|
#define IRQ_DCD BIT5
|
|
#define IRQ_RI BIT4
|
|
#define IRQ_ALL 0x3ff0
|
|
#define IRQ_MASTER BIT0
|
|
|
|
#define slgt_irq_on(info, mask) \
|
|
wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
|
|
#define slgt_irq_off(info, mask) \
|
|
wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
|
|
|
|
static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
|
|
static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
|
|
static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
|
|
static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
|
|
static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
|
|
static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
|
|
|
|
static void msc_set_vcr(struct slgt_info *info);
|
|
|
|
static int startup(struct slgt_info *info);
|
|
static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
|
|
static void shutdown(struct slgt_info *info);
|
|
static void program_hw(struct slgt_info *info);
|
|
static void change_params(struct slgt_info *info);
|
|
|
|
static int register_test(struct slgt_info *info);
|
|
static int irq_test(struct slgt_info *info);
|
|
static int loopback_test(struct slgt_info *info);
|
|
static int adapter_test(struct slgt_info *info);
|
|
|
|
static void reset_adapter(struct slgt_info *info);
|
|
static void reset_port(struct slgt_info *info);
|
|
static void async_mode(struct slgt_info *info);
|
|
static void sync_mode(struct slgt_info *info);
|
|
|
|
static void rx_stop(struct slgt_info *info);
|
|
static void rx_start(struct slgt_info *info);
|
|
static void reset_rbufs(struct slgt_info *info);
|
|
static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
|
|
static void rdma_reset(struct slgt_info *info);
|
|
static int rx_get_frame(struct slgt_info *info);
|
|
static int rx_get_buf(struct slgt_info *info);
|
|
|
|
static void tx_start(struct slgt_info *info);
|
|
static void tx_stop(struct slgt_info *info);
|
|
static void tx_set_idle(struct slgt_info *info);
|
|
static unsigned int free_tbuf_count(struct slgt_info *info);
|
|
static void reset_tbufs(struct slgt_info *info);
|
|
static void tdma_reset(struct slgt_info *info);
|
|
static void tdma_start(struct slgt_info *info);
|
|
static void tx_load(struct slgt_info *info, const char *buf, unsigned int count);
|
|
|
|
static void get_signals(struct slgt_info *info);
|
|
static void set_signals(struct slgt_info *info);
|
|
static void enable_loopback(struct slgt_info *info);
|
|
static void set_rate(struct slgt_info *info, u32 data_rate);
|
|
|
|
static int bh_action(struct slgt_info *info);
|
|
static void bh_handler(struct work_struct *work);
|
|
static void bh_transmit(struct slgt_info *info);
|
|
static void isr_serial(struct slgt_info *info);
|
|
static void isr_rdma(struct slgt_info *info);
|
|
static void isr_txeom(struct slgt_info *info, unsigned short status);
|
|
static void isr_tdma(struct slgt_info *info);
|
|
static irqreturn_t slgt_interrupt(int irq, void *dev_id);
|
|
|
|
static int alloc_dma_bufs(struct slgt_info *info);
|
|
static void free_dma_bufs(struct slgt_info *info);
|
|
static int alloc_desc(struct slgt_info *info);
|
|
static void free_desc(struct slgt_info *info);
|
|
static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
|
|
static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
|
|
|
|
static int alloc_tmp_rbuf(struct slgt_info *info);
|
|
static void free_tmp_rbuf(struct slgt_info *info);
|
|
|
|
static void tx_timeout(unsigned long context);
|
|
static void rx_timeout(unsigned long context);
|
|
|
|
/*
|
|
* ioctl handlers
|
|
*/
|
|
static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
|
|
static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
|
|
static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
|
|
static int get_txidle(struct slgt_info *info, int __user *idle_mode);
|
|
static int set_txidle(struct slgt_info *info, int idle_mode);
|
|
static int tx_enable(struct slgt_info *info, int enable);
|
|
static int tx_abort(struct slgt_info *info);
|
|
static int rx_enable(struct slgt_info *info, int enable);
|
|
static int modem_input_wait(struct slgt_info *info,int arg);
|
|
static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
|
|
static int tiocmget(struct tty_struct *tty, struct file *file);
|
|
static int tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear);
|
|
static void set_break(struct tty_struct *tty, int break_state);
|
|
static int get_interface(struct slgt_info *info, int __user *if_mode);
|
|
static int set_interface(struct slgt_info *info, int if_mode);
|
|
static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
|
|
static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
|
|
static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
|
|
|
|
/*
|
|
* driver functions
|
|
*/
|
|
static void add_device(struct slgt_info *info);
|
|
static void device_init(int adapter_num, struct pci_dev *pdev);
|
|
static int claim_resources(struct slgt_info *info);
|
|
static void release_resources(struct slgt_info *info);
|
|
|
|
/*
|
|
* DEBUG OUTPUT CODE
|
|
*/
|
|
#ifndef DBGINFO
|
|
#define DBGINFO(fmt)
|
|
#endif
|
|
#ifndef DBGERR
|
|
#define DBGERR(fmt)
|
|
#endif
|
|
#ifndef DBGBH
|
|
#define DBGBH(fmt)
|
|
#endif
|
|
#ifndef DBGISR
|
|
#define DBGISR(fmt)
|
|
#endif
|
|
|
|
#ifdef DBGDATA
|
|
static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
|
|
{
|
|
int i;
|
|
int linecount;
|
|
printk("%s %s data:\n",info->device_name, label);
|
|
while(count) {
|
|
linecount = (count > 16) ? 16 : count;
|
|
for(i=0; i < linecount; i++)
|
|
printk("%02X ",(unsigned char)data[i]);
|
|
for(;i<17;i++)
|
|
printk(" ");
|
|
for(i=0;i<linecount;i++) {
|
|
if (data[i]>=040 && data[i]<=0176)
|
|
printk("%c",data[i]);
|
|
else
|
|
printk(".");
|
|
}
|
|
printk("\n");
|
|
data += linecount;
|
|
count -= linecount;
|
|
}
|
|
}
|
|
#else
|
|
#define DBGDATA(info, buf, size, label)
|
|
#endif
|
|
|
|
#ifdef DBGTBUF
|
|
static void dump_tbufs(struct slgt_info *info)
|
|
{
|
|
int i;
|
|
printk("tbuf_current=%d\n", info->tbuf_current);
|
|
for (i=0 ; i < info->tbuf_count ; i++) {
|
|
printk("%d: count=%04X status=%04X\n",
|
|
i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
|
|
}
|
|
}
|
|
#else
|
|
#define DBGTBUF(info)
|
|
#endif
|
|
|
|
#ifdef DBGRBUF
|
|
static void dump_rbufs(struct slgt_info *info)
|
|
{
|
|
int i;
|
|
printk("rbuf_current=%d\n", info->rbuf_current);
|
|
for (i=0 ; i < info->rbuf_count ; i++) {
|
|
printk("%d: count=%04X status=%04X\n",
|
|
i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
|
|
}
|
|
}
|
|
#else
|
|
#define DBGRBUF(info)
|
|
#endif
|
|
|
|
static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
|
|
{
|
|
#ifdef SANITY_CHECK
|
|
if (!info) {
|
|
printk("null struct slgt_info for (%s) in %s\n", devname, name);
|
|
return 1;
|
|
}
|
|
if (info->magic != MGSL_MAGIC) {
|
|
printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
|
|
return 1;
|
|
}
|
|
#else
|
|
if (!info)
|
|
return 1;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* line discipline callback wrappers
|
|
*
|
|
* The wrappers maintain line discipline references
|
|
* while calling into the line discipline.
|
|
*
|
|
* ldisc_receive_buf - pass receive data to line discipline
|
|
*/
|
|
static void ldisc_receive_buf(struct tty_struct *tty,
|
|
const __u8 *data, char *flags, int count)
|
|
{
|
|
struct tty_ldisc *ld;
|
|
if (!tty)
|
|
return;
|
|
ld = tty_ldisc_ref(tty);
|
|
if (ld) {
|
|
if (ld->receive_buf)
|
|
ld->receive_buf(tty, data, flags, count);
|
|
tty_ldisc_deref(ld);
|
|
}
|
|
}
|
|
|
|
/* tty callbacks */
|
|
|
|
static int open(struct tty_struct *tty, struct file *filp)
|
|
{
|
|
struct slgt_info *info;
|
|
int retval, line;
|
|
unsigned long flags;
|
|
|
|
line = tty->index;
|
|
if ((line < 0) || (line >= slgt_device_count)) {
|
|
DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
|
|
return -ENODEV;
|
|
}
|
|
|
|
info = slgt_device_list;
|
|
while(info && info->line != line)
|
|
info = info->next_device;
|
|
if (sanity_check(info, tty->name, "open"))
|
|
return -ENODEV;
|
|
if (info->init_error) {
|
|
DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
|
|
return -ENODEV;
|
|
}
|
|
|
|
tty->driver_data = info;
|
|
info->tty = tty;
|
|
|
|
DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->count));
|
|
|
|
/* If port is closing, signal caller to try again */
|
|
if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
|
|
if (info->flags & ASYNC_CLOSING)
|
|
interruptible_sleep_on(&info->close_wait);
|
|
retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
|
|
-EAGAIN : -ERESTARTSYS);
|
|
goto cleanup;
|
|
}
|
|
|
|
info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
|
|
|
|
spin_lock_irqsave(&info->netlock, flags);
|
|
if (info->netcount) {
|
|
retval = -EBUSY;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
goto cleanup;
|
|
}
|
|
info->count++;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
|
|
if (info->count == 1) {
|
|
/* 1st open on this device, init hardware */
|
|
retval = startup(info);
|
|
if (retval < 0)
|
|
goto cleanup;
|
|
}
|
|
|
|
retval = block_til_ready(tty, filp, info);
|
|
if (retval) {
|
|
DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
|
|
goto cleanup;
|
|
}
|
|
|
|
retval = 0;
|
|
|
|
cleanup:
|
|
if (retval) {
|
|
if (tty->count == 1)
|
|
info->tty = NULL; /* tty layer will release tty struct */
|
|
if(info->count)
|
|
info->count--;
|
|
}
|
|
|
|
DBGINFO(("%s open rc=%d\n", info->device_name, retval));
|
|
return retval;
|
|
}
|
|
|
|
static void close(struct tty_struct *tty, struct file *filp)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
|
|
if (sanity_check(info, tty->name, "close"))
|
|
return;
|
|
DBGINFO(("%s close entry, count=%d\n", info->device_name, info->count));
|
|
|
|
if (!info->count)
|
|
return;
|
|
|
|
if (tty_hung_up_p(filp))
|
|
goto cleanup;
|
|
|
|
if ((tty->count == 1) && (info->count != 1)) {
|
|
/*
|
|
* tty->count is 1 and the tty structure will be freed.
|
|
* info->count should be one in this case.
|
|
* if it's not, correct it so that the port is shutdown.
|
|
*/
|
|
DBGERR(("%s close: bad refcount; tty->count=1, "
|
|
"info->count=%d\n", info->device_name, info->count));
|
|
info->count = 1;
|
|
}
|
|
|
|
info->count--;
|
|
|
|
/* if at least one open remaining, leave hardware active */
|
|
if (info->count)
|
|
goto cleanup;
|
|
|
|
info->flags |= ASYNC_CLOSING;
|
|
|
|
/* set tty->closing to notify line discipline to
|
|
* only process XON/XOFF characters. Only the N_TTY
|
|
* discipline appears to use this (ppp does not).
|
|
*/
|
|
tty->closing = 1;
|
|
|
|
/* wait for transmit data to clear all layers */
|
|
|
|
if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
|
|
DBGINFO(("%s call tty_wait_until_sent\n", info->device_name));
|
|
tty_wait_until_sent(tty, info->closing_wait);
|
|
}
|
|
|
|
if (info->flags & ASYNC_INITIALIZED)
|
|
wait_until_sent(tty, info->timeout);
|
|
if (tty->driver->flush_buffer)
|
|
tty->driver->flush_buffer(tty);
|
|
tty_ldisc_flush(tty);
|
|
|
|
shutdown(info);
|
|
|
|
tty->closing = 0;
|
|
info->tty = NULL;
|
|
|
|
if (info->blocked_open) {
|
|
if (info->close_delay) {
|
|
msleep_interruptible(jiffies_to_msecs(info->close_delay));
|
|
}
|
|
wake_up_interruptible(&info->open_wait);
|
|
}
|
|
|
|
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
|
|
|
|
wake_up_interruptible(&info->close_wait);
|
|
|
|
cleanup:
|
|
DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->count));
|
|
}
|
|
|
|
static void hangup(struct tty_struct *tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
|
|
if (sanity_check(info, tty->name, "hangup"))
|
|
return;
|
|
DBGINFO(("%s hangup\n", info->device_name));
|
|
|
|
flush_buffer(tty);
|
|
shutdown(info);
|
|
|
|
info->count = 0;
|
|
info->flags &= ~ASYNC_NORMAL_ACTIVE;
|
|
info->tty = NULL;
|
|
|
|
wake_up_interruptible(&info->open_wait);
|
|
}
|
|
|
|
static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
DBGINFO(("%s set_termios\n", tty->driver->name));
|
|
|
|
change_params(info);
|
|
|
|
/* Handle transition to B0 status */
|
|
if (old_termios->c_cflag & CBAUD &&
|
|
!(tty->termios->c_cflag & CBAUD)) {
|
|
info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
/* Handle transition away from B0 status */
|
|
if (!(old_termios->c_cflag & CBAUD) &&
|
|
tty->termios->c_cflag & CBAUD) {
|
|
info->signals |= SerialSignal_DTR;
|
|
if (!(tty->termios->c_cflag & CRTSCTS) ||
|
|
!test_bit(TTY_THROTTLED, &tty->flags)) {
|
|
info->signals |= SerialSignal_RTS;
|
|
}
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
/* Handle turning off CRTSCTS */
|
|
if (old_termios->c_cflag & CRTSCTS &&
|
|
!(tty->termios->c_cflag & CRTSCTS)) {
|
|
tty->hw_stopped = 0;
|
|
tx_release(tty);
|
|
}
|
|
}
|
|
|
|
static int write(struct tty_struct *tty,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
int ret = 0;
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "write"))
|
|
goto cleanup;
|
|
DBGINFO(("%s write count=%d\n", info->device_name, count));
|
|
|
|
if (!info->tx_buf)
|
|
goto cleanup;
|
|
|
|
if (count > info->max_frame_size) {
|
|
ret = -EIO;
|
|
goto cleanup;
|
|
}
|
|
|
|
if (!count)
|
|
goto cleanup;
|
|
|
|
if (info->params.mode == MGSL_MODE_RAW ||
|
|
info->params.mode == MGSL_MODE_MONOSYNC ||
|
|
info->params.mode == MGSL_MODE_BISYNC) {
|
|
unsigned int bufs_needed = (count/DMABUFSIZE);
|
|
unsigned int bufs_free = free_tbuf_count(info);
|
|
if (count % DMABUFSIZE)
|
|
++bufs_needed;
|
|
if (bufs_needed > bufs_free)
|
|
goto cleanup;
|
|
} else {
|
|
if (info->tx_active)
|
|
goto cleanup;
|
|
if (info->tx_count) {
|
|
/* send accumulated data from send_char() calls */
|
|
/* as frame and wait before accepting more data. */
|
|
tx_load(info, info->tx_buf, info->tx_count);
|
|
goto start;
|
|
}
|
|
}
|
|
|
|
ret = info->tx_count = count;
|
|
tx_load(info, buf, count);
|
|
goto start;
|
|
|
|
start:
|
|
if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (!info->tx_active)
|
|
tx_start(info);
|
|
else
|
|
tdma_start(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
cleanup:
|
|
DBGINFO(("%s write rc=%d\n", info->device_name, ret));
|
|
return ret;
|
|
}
|
|
|
|
static void put_char(struct tty_struct *tty, unsigned char ch)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "put_char"))
|
|
return;
|
|
DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
|
|
if (!info->tx_buf)
|
|
return;
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (!info->tx_active && (info->tx_count < info->max_frame_size))
|
|
info->tx_buf[info->tx_count++] = ch;
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
static void send_xchar(struct tty_struct *tty, char ch)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "send_xchar"))
|
|
return;
|
|
DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
|
|
info->x_char = ch;
|
|
if (ch) {
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (!info->tx_enabled)
|
|
tx_start(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
}
|
|
|
|
static void wait_until_sent(struct tty_struct *tty, int timeout)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long orig_jiffies, char_time;
|
|
|
|
if (!info )
|
|
return;
|
|
if (sanity_check(info, tty->name, "wait_until_sent"))
|
|
return;
|
|
DBGINFO(("%s wait_until_sent entry\n", info->device_name));
|
|
if (!(info->flags & ASYNC_INITIALIZED))
|
|
goto exit;
|
|
|
|
orig_jiffies = jiffies;
|
|
|
|
/* Set check interval to 1/5 of estimated time to
|
|
* send a character, and make it at least 1. The check
|
|
* interval should also be less than the timeout.
|
|
* Note: use tight timings here to satisfy the NIST-PCTS.
|
|
*/
|
|
|
|
if (info->params.data_rate) {
|
|
char_time = info->timeout/(32 * 5);
|
|
if (!char_time)
|
|
char_time++;
|
|
} else
|
|
char_time = 1;
|
|
|
|
if (timeout)
|
|
char_time = min_t(unsigned long, char_time, timeout);
|
|
|
|
while (info->tx_active) {
|
|
msleep_interruptible(jiffies_to_msecs(char_time));
|
|
if (signal_pending(current))
|
|
break;
|
|
if (timeout && time_after(jiffies, orig_jiffies + timeout))
|
|
break;
|
|
}
|
|
|
|
exit:
|
|
DBGINFO(("%s wait_until_sent exit\n", info->device_name));
|
|
}
|
|
|
|
static int write_room(struct tty_struct *tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
int ret;
|
|
|
|
if (sanity_check(info, tty->name, "write_room"))
|
|
return 0;
|
|
ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
|
|
DBGINFO(("%s write_room=%d\n", info->device_name, ret));
|
|
return ret;
|
|
}
|
|
|
|
static void flush_chars(struct tty_struct *tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "flush_chars"))
|
|
return;
|
|
DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
|
|
|
|
if (info->tx_count <= 0 || tty->stopped ||
|
|
tty->hw_stopped || !info->tx_buf)
|
|
return;
|
|
|
|
DBGINFO(("%s flush_chars start transmit\n", info->device_name));
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (!info->tx_active && info->tx_count) {
|
|
tx_load(info, info->tx_buf,info->tx_count);
|
|
tx_start(info);
|
|
}
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
static void flush_buffer(struct tty_struct *tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "flush_buffer"))
|
|
return;
|
|
DBGINFO(("%s flush_buffer\n", info->device_name));
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (!info->tx_active)
|
|
info->tx_count = 0;
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
tty_wakeup(tty);
|
|
}
|
|
|
|
/*
|
|
* throttle (stop) transmitter
|
|
*/
|
|
static void tx_hold(struct tty_struct *tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "tx_hold"))
|
|
return;
|
|
DBGINFO(("%s tx_hold\n", info->device_name));
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
|
|
tx_stop(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
/*
|
|
* release (start) transmitter
|
|
*/
|
|
static void tx_release(struct tty_struct *tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "tx_release"))
|
|
return;
|
|
DBGINFO(("%s tx_release\n", info->device_name));
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (!info->tx_active && info->tx_count) {
|
|
tx_load(info, info->tx_buf, info->tx_count);
|
|
tx_start(info);
|
|
}
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
/*
|
|
* Service an IOCTL request
|
|
*
|
|
* Arguments
|
|
*
|
|
* tty pointer to tty instance data
|
|
* file pointer to associated file object for device
|
|
* cmd IOCTL command code
|
|
* arg command argument/context
|
|
*
|
|
* Return 0 if success, otherwise error code
|
|
*/
|
|
static int ioctl(struct tty_struct *tty, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
struct mgsl_icount cnow; /* kernel counter temps */
|
|
struct serial_icounter_struct __user *p_cuser; /* user space */
|
|
unsigned long flags;
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
if (sanity_check(info, tty->name, "ioctl"))
|
|
return -ENODEV;
|
|
DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
|
|
|
|
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
|
|
(cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
|
|
if (tty->flags & (1 << TTY_IO_ERROR))
|
|
return -EIO;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case MGSL_IOCGPARAMS:
|
|
return get_params(info, argp);
|
|
case MGSL_IOCSPARAMS:
|
|
return set_params(info, argp);
|
|
case MGSL_IOCGTXIDLE:
|
|
return get_txidle(info, argp);
|
|
case MGSL_IOCSTXIDLE:
|
|
return set_txidle(info, (int)arg);
|
|
case MGSL_IOCTXENABLE:
|
|
return tx_enable(info, (int)arg);
|
|
case MGSL_IOCRXENABLE:
|
|
return rx_enable(info, (int)arg);
|
|
case MGSL_IOCTXABORT:
|
|
return tx_abort(info);
|
|
case MGSL_IOCGSTATS:
|
|
return get_stats(info, argp);
|
|
case MGSL_IOCWAITEVENT:
|
|
return wait_mgsl_event(info, argp);
|
|
case TIOCMIWAIT:
|
|
return modem_input_wait(info,(int)arg);
|
|
case MGSL_IOCGIF:
|
|
return get_interface(info, argp);
|
|
case MGSL_IOCSIF:
|
|
return set_interface(info,(int)arg);
|
|
case MGSL_IOCSGPIO:
|
|
return set_gpio(info, argp);
|
|
case MGSL_IOCGGPIO:
|
|
return get_gpio(info, argp);
|
|
case MGSL_IOCWAITGPIO:
|
|
return wait_gpio(info, argp);
|
|
case TIOCGICOUNT:
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
cnow = info->icount;
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
p_cuser = argp;
|
|
if (put_user(cnow.cts, &p_cuser->cts) ||
|
|
put_user(cnow.dsr, &p_cuser->dsr) ||
|
|
put_user(cnow.rng, &p_cuser->rng) ||
|
|
put_user(cnow.dcd, &p_cuser->dcd) ||
|
|
put_user(cnow.rx, &p_cuser->rx) ||
|
|
put_user(cnow.tx, &p_cuser->tx) ||
|
|
put_user(cnow.frame, &p_cuser->frame) ||
|
|
put_user(cnow.overrun, &p_cuser->overrun) ||
|
|
put_user(cnow.parity, &p_cuser->parity) ||
|
|
put_user(cnow.brk, &p_cuser->brk) ||
|
|
put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
|
|
return -EFAULT;
|
|
return 0;
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* support for 32 bit ioctl calls on 64 bit systems
|
|
*/
|
|
#ifdef CONFIG_COMPAT
|
|
static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
|
|
{
|
|
struct MGSL_PARAMS32 tmp_params;
|
|
|
|
DBGINFO(("%s get_params32\n", info->device_name));
|
|
tmp_params.mode = (compat_ulong_t)info->params.mode;
|
|
tmp_params.loopback = info->params.loopback;
|
|
tmp_params.flags = info->params.flags;
|
|
tmp_params.encoding = info->params.encoding;
|
|
tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
|
|
tmp_params.addr_filter = info->params.addr_filter;
|
|
tmp_params.crc_type = info->params.crc_type;
|
|
tmp_params.preamble_length = info->params.preamble_length;
|
|
tmp_params.preamble = info->params.preamble;
|
|
tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
|
|
tmp_params.data_bits = info->params.data_bits;
|
|
tmp_params.stop_bits = info->params.stop_bits;
|
|
tmp_params.parity = info->params.parity;
|
|
if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
|
|
{
|
|
struct MGSL_PARAMS32 tmp_params;
|
|
|
|
DBGINFO(("%s set_params32\n", info->device_name));
|
|
if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
|
|
return -EFAULT;
|
|
|
|
spin_lock(&info->lock);
|
|
info->params.mode = tmp_params.mode;
|
|
info->params.loopback = tmp_params.loopback;
|
|
info->params.flags = tmp_params.flags;
|
|
info->params.encoding = tmp_params.encoding;
|
|
info->params.clock_speed = tmp_params.clock_speed;
|
|
info->params.addr_filter = tmp_params.addr_filter;
|
|
info->params.crc_type = tmp_params.crc_type;
|
|
info->params.preamble_length = tmp_params.preamble_length;
|
|
info->params.preamble = tmp_params.preamble;
|
|
info->params.data_rate = tmp_params.data_rate;
|
|
info->params.data_bits = tmp_params.data_bits;
|
|
info->params.stop_bits = tmp_params.stop_bits;
|
|
info->params.parity = tmp_params.parity;
|
|
spin_unlock(&info->lock);
|
|
|
|
change_params(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long slgt_compat_ioctl(struct tty_struct *tty, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
int rc = -ENOIOCTLCMD;
|
|
|
|
if (sanity_check(info, tty->name, "compat_ioctl"))
|
|
return -ENODEV;
|
|
DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
|
|
|
|
switch (cmd) {
|
|
|
|
case MGSL_IOCSPARAMS32:
|
|
rc = set_params32(info, compat_ptr(arg));
|
|
break;
|
|
|
|
case MGSL_IOCGPARAMS32:
|
|
rc = get_params32(info, compat_ptr(arg));
|
|
break;
|
|
|
|
case MGSL_IOCGPARAMS:
|
|
case MGSL_IOCSPARAMS:
|
|
case MGSL_IOCGTXIDLE:
|
|
case MGSL_IOCGSTATS:
|
|
case MGSL_IOCWAITEVENT:
|
|
case MGSL_IOCGIF:
|
|
case MGSL_IOCSGPIO:
|
|
case MGSL_IOCGGPIO:
|
|
case MGSL_IOCWAITGPIO:
|
|
case TIOCGICOUNT:
|
|
rc = ioctl(tty, file, cmd, (unsigned long)(compat_ptr(arg)));
|
|
break;
|
|
|
|
case MGSL_IOCSTXIDLE:
|
|
case MGSL_IOCTXENABLE:
|
|
case MGSL_IOCRXENABLE:
|
|
case MGSL_IOCTXABORT:
|
|
case TIOCMIWAIT:
|
|
case MGSL_IOCSIF:
|
|
rc = ioctl(tty, file, cmd, arg);
|
|
break;
|
|
}
|
|
|
|
DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
|
|
return rc;
|
|
}
|
|
#else
|
|
#define slgt_compat_ioctl NULL
|
|
#endif /* ifdef CONFIG_COMPAT */
|
|
|
|
/*
|
|
* proc fs support
|
|
*/
|
|
static inline int line_info(char *buf, struct slgt_info *info)
|
|
{
|
|
char stat_buf[30];
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
|
|
info->device_name, info->phys_reg_addr,
|
|
info->irq_level, info->max_frame_size);
|
|
|
|
/* output current serial signal states */
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
get_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
stat_buf[0] = 0;
|
|
stat_buf[1] = 0;
|
|
if (info->signals & SerialSignal_RTS)
|
|
strcat(stat_buf, "|RTS");
|
|
if (info->signals & SerialSignal_CTS)
|
|
strcat(stat_buf, "|CTS");
|
|
if (info->signals & SerialSignal_DTR)
|
|
strcat(stat_buf, "|DTR");
|
|
if (info->signals & SerialSignal_DSR)
|
|
strcat(stat_buf, "|DSR");
|
|
if (info->signals & SerialSignal_DCD)
|
|
strcat(stat_buf, "|CD");
|
|
if (info->signals & SerialSignal_RI)
|
|
strcat(stat_buf, "|RI");
|
|
|
|
if (info->params.mode != MGSL_MODE_ASYNC) {
|
|
ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
|
|
info->icount.txok, info->icount.rxok);
|
|
if (info->icount.txunder)
|
|
ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
|
|
if (info->icount.txabort)
|
|
ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
|
|
if (info->icount.rxshort)
|
|
ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
|
|
if (info->icount.rxlong)
|
|
ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
|
|
if (info->icount.rxover)
|
|
ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
|
|
if (info->icount.rxcrc)
|
|
ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
|
|
} else {
|
|
ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
|
|
info->icount.tx, info->icount.rx);
|
|
if (info->icount.frame)
|
|
ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
|
|
if (info->icount.parity)
|
|
ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
|
|
if (info->icount.brk)
|
|
ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
|
|
if (info->icount.overrun)
|
|
ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
|
|
}
|
|
|
|
/* Append serial signal status to end */
|
|
ret += sprintf(buf+ret, " %s\n", stat_buf+1);
|
|
|
|
ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
|
|
info->tx_active,info->bh_requested,info->bh_running,
|
|
info->pending_bh);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Called to print information about devices
|
|
*/
|
|
static int read_proc(char *page, char **start, off_t off, int count,
|
|
int *eof, void *data)
|
|
{
|
|
int len = 0, l;
|
|
off_t begin = 0;
|
|
struct slgt_info *info;
|
|
|
|
len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
|
|
|
|
info = slgt_device_list;
|
|
while( info ) {
|
|
l = line_info(page + len, info);
|
|
len += l;
|
|
if (len+begin > off+count)
|
|
goto done;
|
|
if (len+begin < off) {
|
|
begin += len;
|
|
len = 0;
|
|
}
|
|
info = info->next_device;
|
|
}
|
|
|
|
*eof = 1;
|
|
done:
|
|
if (off >= len+begin)
|
|
return 0;
|
|
*start = page + (off-begin);
|
|
return ((count < begin+len-off) ? count : begin+len-off);
|
|
}
|
|
|
|
/*
|
|
* return count of bytes in transmit buffer
|
|
*/
|
|
static int chars_in_buffer(struct tty_struct *tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
if (sanity_check(info, tty->name, "chars_in_buffer"))
|
|
return 0;
|
|
DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, info->tx_count));
|
|
return info->tx_count;
|
|
}
|
|
|
|
/*
|
|
* signal remote device to throttle send data (our receive data)
|
|
*/
|
|
static void throttle(struct tty_struct * tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "throttle"))
|
|
return;
|
|
DBGINFO(("%s throttle\n", info->device_name));
|
|
if (I_IXOFF(tty))
|
|
send_xchar(tty, STOP_CHAR(tty));
|
|
if (tty->termios->c_cflag & CRTSCTS) {
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
info->signals &= ~SerialSignal_RTS;
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* signal remote device to stop throttling send data (our receive data)
|
|
*/
|
|
static void unthrottle(struct tty_struct * tty)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "unthrottle"))
|
|
return;
|
|
DBGINFO(("%s unthrottle\n", info->device_name));
|
|
if (I_IXOFF(tty)) {
|
|
if (info->x_char)
|
|
info->x_char = 0;
|
|
else
|
|
send_xchar(tty, START_CHAR(tty));
|
|
}
|
|
if (tty->termios->c_cflag & CRTSCTS) {
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
info->signals |= SerialSignal_RTS;
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* set or clear transmit break condition
|
|
* break_state -1=set break condition, 0=clear
|
|
*/
|
|
static void set_break(struct tty_struct *tty, int break_state)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned short value;
|
|
unsigned long flags;
|
|
|
|
if (sanity_check(info, tty->name, "set_break"))
|
|
return;
|
|
DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
value = rd_reg16(info, TCR);
|
|
if (break_state == -1)
|
|
value |= BIT6;
|
|
else
|
|
value &= ~BIT6;
|
|
wr_reg16(info, TCR, value);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
|
|
/**
|
|
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
|
|
* set encoding and frame check sequence (FCS) options
|
|
*
|
|
* dev pointer to network device structure
|
|
* encoding serial encoding setting
|
|
* parity FCS setting
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
|
|
unsigned short parity)
|
|
{
|
|
struct slgt_info *info = dev_to_port(dev);
|
|
unsigned char new_encoding;
|
|
unsigned short new_crctype;
|
|
|
|
/* return error if TTY interface open */
|
|
if (info->count)
|
|
return -EBUSY;
|
|
|
|
DBGINFO(("%s hdlcdev_attach\n", info->device_name));
|
|
|
|
switch (encoding)
|
|
{
|
|
case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
|
|
case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
|
|
case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
|
|
case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
|
|
case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
|
|
default: return -EINVAL;
|
|
}
|
|
|
|
switch (parity)
|
|
{
|
|
case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
|
|
case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
|
|
case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
|
|
default: return -EINVAL;
|
|
}
|
|
|
|
info->params.encoding = new_encoding;
|
|
info->params.crc_type = new_crctype;
|
|
|
|
/* if network interface up, reprogram hardware */
|
|
if (info->netcount)
|
|
program_hw(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by generic HDLC layer to send frame
|
|
*
|
|
* skb socket buffer containing HDLC frame
|
|
* dev pointer to network device structure
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct slgt_info *info = dev_to_port(dev);
|
|
struct net_device_stats *stats = hdlc_stats(dev);
|
|
unsigned long flags;
|
|
|
|
DBGINFO(("%s hdlc_xmit\n", dev->name));
|
|
|
|
/* stop sending until this frame completes */
|
|
netif_stop_queue(dev);
|
|
|
|
/* copy data to device buffers */
|
|
info->tx_count = skb->len;
|
|
tx_load(info, skb->data, skb->len);
|
|
|
|
/* update network statistics */
|
|
stats->tx_packets++;
|
|
stats->tx_bytes += skb->len;
|
|
|
|
/* done with socket buffer, so free it */
|
|
dev_kfree_skb(skb);
|
|
|
|
/* save start time for transmit timeout detection */
|
|
dev->trans_start = jiffies;
|
|
|
|
/* start hardware transmitter if necessary */
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (!info->tx_active)
|
|
tx_start(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by network layer when interface enabled
|
|
* claim resources and initialize hardware
|
|
*
|
|
* dev pointer to network device structure
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_open(struct net_device *dev)
|
|
{
|
|
struct slgt_info *info = dev_to_port(dev);
|
|
int rc;
|
|
unsigned long flags;
|
|
|
|
if (!try_module_get(THIS_MODULE))
|
|
return -EBUSY;
|
|
|
|
DBGINFO(("%s hdlcdev_open\n", dev->name));
|
|
|
|
/* generic HDLC layer open processing */
|
|
if ((rc = hdlc_open(dev)))
|
|
return rc;
|
|
|
|
/* arbitrate between network and tty opens */
|
|
spin_lock_irqsave(&info->netlock, flags);
|
|
if (info->count != 0 || info->netcount != 0) {
|
|
DBGINFO(("%s hdlc_open busy\n", dev->name));
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
return -EBUSY;
|
|
}
|
|
info->netcount=1;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
|
|
/* claim resources and init adapter */
|
|
if ((rc = startup(info)) != 0) {
|
|
spin_lock_irqsave(&info->netlock, flags);
|
|
info->netcount=0;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/* assert DTR and RTS, apply hardware settings */
|
|
info->signals |= SerialSignal_RTS + SerialSignal_DTR;
|
|
program_hw(info);
|
|
|
|
/* enable network layer transmit */
|
|
dev->trans_start = jiffies;
|
|
netif_start_queue(dev);
|
|
|
|
/* inform generic HDLC layer of current DCD status */
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
get_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
if (info->signals & SerialSignal_DCD)
|
|
netif_carrier_on(dev);
|
|
else
|
|
netif_carrier_off(dev);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by network layer when interface is disabled
|
|
* shutdown hardware and release resources
|
|
*
|
|
* dev pointer to network device structure
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_close(struct net_device *dev)
|
|
{
|
|
struct slgt_info *info = dev_to_port(dev);
|
|
unsigned long flags;
|
|
|
|
DBGINFO(("%s hdlcdev_close\n", dev->name));
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* shutdown adapter and release resources */
|
|
shutdown(info);
|
|
|
|
hdlc_close(dev);
|
|
|
|
spin_lock_irqsave(&info->netlock, flags);
|
|
info->netcount=0;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
|
|
module_put(THIS_MODULE);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by network layer to process IOCTL call to network device
|
|
*
|
|
* dev pointer to network device structure
|
|
* ifr pointer to network interface request structure
|
|
* cmd IOCTL command code
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
const size_t size = sizeof(sync_serial_settings);
|
|
sync_serial_settings new_line;
|
|
sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
|
|
struct slgt_info *info = dev_to_port(dev);
|
|
unsigned int flags;
|
|
|
|
DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
|
|
|
|
/* return error if TTY interface open */
|
|
if (info->count)
|
|
return -EBUSY;
|
|
|
|
if (cmd != SIOCWANDEV)
|
|
return hdlc_ioctl(dev, ifr, cmd);
|
|
|
|
switch(ifr->ifr_settings.type) {
|
|
case IF_GET_IFACE: /* return current sync_serial_settings */
|
|
|
|
ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
|
|
if (ifr->ifr_settings.size < size) {
|
|
ifr->ifr_settings.size = size; /* data size wanted */
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
|
|
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
|
|
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
|
|
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
|
|
|
|
switch (flags){
|
|
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
|
|
case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
|
|
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
|
|
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
|
|
default: new_line.clock_type = CLOCK_DEFAULT;
|
|
}
|
|
|
|
new_line.clock_rate = info->params.clock_speed;
|
|
new_line.loopback = info->params.loopback ? 1:0;
|
|
|
|
if (copy_to_user(line, &new_line, size))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
|
|
|
|
if(!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
if (copy_from_user(&new_line, line, size))
|
|
return -EFAULT;
|
|
|
|
switch (new_line.clock_type)
|
|
{
|
|
case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
|
|
case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
|
|
case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
|
|
case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
|
|
case CLOCK_DEFAULT: flags = info->params.flags &
|
|
(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
|
|
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
|
|
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
|
|
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
|
|
default: return -EINVAL;
|
|
}
|
|
|
|
if (new_line.loopback != 0 && new_line.loopback != 1)
|
|
return -EINVAL;
|
|
|
|
info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
|
|
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
|
|
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
|
|
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
|
|
info->params.flags |= flags;
|
|
|
|
info->params.loopback = new_line.loopback;
|
|
|
|
if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
|
|
info->params.clock_speed = new_line.clock_rate;
|
|
else
|
|
info->params.clock_speed = 0;
|
|
|
|
/* if network interface up, reprogram hardware */
|
|
if (info->netcount)
|
|
program_hw(info);
|
|
return 0;
|
|
|
|
default:
|
|
return hdlc_ioctl(dev, ifr, cmd);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* called by network layer when transmit timeout is detected
|
|
*
|
|
* dev pointer to network device structure
|
|
*/
|
|
static void hdlcdev_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct slgt_info *info = dev_to_port(dev);
|
|
struct net_device_stats *stats = hdlc_stats(dev);
|
|
unsigned long flags;
|
|
|
|
DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
|
|
|
|
stats->tx_errors++;
|
|
stats->tx_aborted_errors++;
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
tx_stop(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/**
|
|
* called by device driver when transmit completes
|
|
* reenable network layer transmit if stopped
|
|
*
|
|
* info pointer to device instance information
|
|
*/
|
|
static void hdlcdev_tx_done(struct slgt_info *info)
|
|
{
|
|
if (netif_queue_stopped(info->netdev))
|
|
netif_wake_queue(info->netdev);
|
|
}
|
|
|
|
/**
|
|
* called by device driver when frame received
|
|
* pass frame to network layer
|
|
*
|
|
* info pointer to device instance information
|
|
* buf pointer to buffer contianing frame data
|
|
* size count of data bytes in buf
|
|
*/
|
|
static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
|
|
{
|
|
struct sk_buff *skb = dev_alloc_skb(size);
|
|
struct net_device *dev = info->netdev;
|
|
struct net_device_stats *stats = hdlc_stats(dev);
|
|
|
|
DBGINFO(("%s hdlcdev_rx\n", dev->name));
|
|
|
|
if (skb == NULL) {
|
|
DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
|
|
stats->rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
memcpy(skb_put(skb, size),buf,size);
|
|
|
|
skb->protocol = hdlc_type_trans(skb, info->netdev);
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += size;
|
|
|
|
netif_rx(skb);
|
|
|
|
info->netdev->last_rx = jiffies;
|
|
}
|
|
|
|
/**
|
|
* called by device driver when adding device instance
|
|
* do generic HDLC initialization
|
|
*
|
|
* info pointer to device instance information
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_init(struct slgt_info *info)
|
|
{
|
|
int rc;
|
|
struct net_device *dev;
|
|
hdlc_device *hdlc;
|
|
|
|
/* allocate and initialize network and HDLC layer objects */
|
|
|
|
if (!(dev = alloc_hdlcdev(info))) {
|
|
printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* for network layer reporting purposes only */
|
|
dev->mem_start = info->phys_reg_addr;
|
|
dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
|
|
dev->irq = info->irq_level;
|
|
|
|
/* network layer callbacks and settings */
|
|
dev->do_ioctl = hdlcdev_ioctl;
|
|
dev->open = hdlcdev_open;
|
|
dev->stop = hdlcdev_close;
|
|
dev->tx_timeout = hdlcdev_tx_timeout;
|
|
dev->watchdog_timeo = 10*HZ;
|
|
dev->tx_queue_len = 50;
|
|
|
|
/* generic HDLC layer callbacks and settings */
|
|
hdlc = dev_to_hdlc(dev);
|
|
hdlc->attach = hdlcdev_attach;
|
|
hdlc->xmit = hdlcdev_xmit;
|
|
|
|
/* register objects with HDLC layer */
|
|
if ((rc = register_hdlc_device(dev))) {
|
|
printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
|
|
free_netdev(dev);
|
|
return rc;
|
|
}
|
|
|
|
info->netdev = dev;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by device driver when removing device instance
|
|
* do generic HDLC cleanup
|
|
*
|
|
* info pointer to device instance information
|
|
*/
|
|
static void hdlcdev_exit(struct slgt_info *info)
|
|
{
|
|
unregister_hdlc_device(info->netdev);
|
|
free_netdev(info->netdev);
|
|
info->netdev = NULL;
|
|
}
|
|
|
|
#endif /* ifdef CONFIG_HDLC */
|
|
|
|
/*
|
|
* get async data from rx DMA buffers
|
|
*/
|
|
static void rx_async(struct slgt_info *info)
|
|
{
|
|
struct tty_struct *tty = info->tty;
|
|
struct mgsl_icount *icount = &info->icount;
|
|
unsigned int start, end;
|
|
unsigned char *p;
|
|
unsigned char status;
|
|
struct slgt_desc *bufs = info->rbufs;
|
|
int i, count;
|
|
int chars = 0;
|
|
int stat;
|
|
unsigned char ch;
|
|
|
|
start = end = info->rbuf_current;
|
|
|
|
while(desc_complete(bufs[end])) {
|
|
count = desc_count(bufs[end]) - info->rbuf_index;
|
|
p = bufs[end].buf + info->rbuf_index;
|
|
|
|
DBGISR(("%s rx_async count=%d\n", info->device_name, count));
|
|
DBGDATA(info, p, count, "rx");
|
|
|
|
for(i=0 ; i < count; i+=2, p+=2) {
|
|
ch = *p;
|
|
icount->rx++;
|
|
|
|
stat = 0;
|
|
|
|
if ((status = *(p+1) & (BIT1 + BIT0))) {
|
|
if (status & BIT1)
|
|
icount->parity++;
|
|
else if (status & BIT0)
|
|
icount->frame++;
|
|
/* discard char if tty control flags say so */
|
|
if (status & info->ignore_status_mask)
|
|
continue;
|
|
if (status & BIT1)
|
|
stat = TTY_PARITY;
|
|
else if (status & BIT0)
|
|
stat = TTY_FRAME;
|
|
}
|
|
if (tty) {
|
|
tty_insert_flip_char(tty, ch, stat);
|
|
chars++;
|
|
}
|
|
}
|
|
|
|
if (i < count) {
|
|
/* receive buffer not completed */
|
|
info->rbuf_index += i;
|
|
mod_timer(&info->rx_timer, jiffies + 1);
|
|
break;
|
|
}
|
|
|
|
info->rbuf_index = 0;
|
|
free_rbufs(info, end, end);
|
|
|
|
if (++end == info->rbuf_count)
|
|
end = 0;
|
|
|
|
/* if entire list searched then no frame available */
|
|
if (end == start)
|
|
break;
|
|
}
|
|
|
|
if (tty && chars)
|
|
tty_flip_buffer_push(tty);
|
|
}
|
|
|
|
/*
|
|
* return next bottom half action to perform
|
|
*/
|
|
static int bh_action(struct slgt_info *info)
|
|
{
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
|
|
if (info->pending_bh & BH_RECEIVE) {
|
|
info->pending_bh &= ~BH_RECEIVE;
|
|
rc = BH_RECEIVE;
|
|
} else if (info->pending_bh & BH_TRANSMIT) {
|
|
info->pending_bh &= ~BH_TRANSMIT;
|
|
rc = BH_TRANSMIT;
|
|
} else if (info->pending_bh & BH_STATUS) {
|
|
info->pending_bh &= ~BH_STATUS;
|
|
rc = BH_STATUS;
|
|
} else {
|
|
/* Mark BH routine as complete */
|
|
info->bh_running = 0;
|
|
info->bh_requested = 0;
|
|
rc = 0;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* perform bottom half processing
|
|
*/
|
|
static void bh_handler(struct work_struct *work)
|
|
{
|
|
struct slgt_info *info = container_of(work, struct slgt_info, task);
|
|
int action;
|
|
|
|
if (!info)
|
|
return;
|
|
info->bh_running = 1;
|
|
|
|
while((action = bh_action(info))) {
|
|
switch (action) {
|
|
case BH_RECEIVE:
|
|
DBGBH(("%s bh receive\n", info->device_name));
|
|
switch(info->params.mode) {
|
|
case MGSL_MODE_ASYNC:
|
|
rx_async(info);
|
|
break;
|
|
case MGSL_MODE_HDLC:
|
|
while(rx_get_frame(info));
|
|
break;
|
|
case MGSL_MODE_RAW:
|
|
case MGSL_MODE_MONOSYNC:
|
|
case MGSL_MODE_BISYNC:
|
|
while(rx_get_buf(info));
|
|
break;
|
|
}
|
|
/* restart receiver if rx DMA buffers exhausted */
|
|
if (info->rx_restart)
|
|
rx_start(info);
|
|
break;
|
|
case BH_TRANSMIT:
|
|
bh_transmit(info);
|
|
break;
|
|
case BH_STATUS:
|
|
DBGBH(("%s bh status\n", info->device_name));
|
|
info->ri_chkcount = 0;
|
|
info->dsr_chkcount = 0;
|
|
info->dcd_chkcount = 0;
|
|
info->cts_chkcount = 0;
|
|
break;
|
|
default:
|
|
DBGBH(("%s unknown action\n", info->device_name));
|
|
break;
|
|
}
|
|
}
|
|
DBGBH(("%s bh_handler exit\n", info->device_name));
|
|
}
|
|
|
|
static void bh_transmit(struct slgt_info *info)
|
|
{
|
|
struct tty_struct *tty = info->tty;
|
|
|
|
DBGBH(("%s bh_transmit\n", info->device_name));
|
|
if (tty)
|
|
tty_wakeup(tty);
|
|
}
|
|
|
|
static void dsr_change(struct slgt_info *info)
|
|
{
|
|
get_signals(info);
|
|
DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
|
|
if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
|
|
slgt_irq_off(info, IRQ_DSR);
|
|
return;
|
|
}
|
|
info->icount.dsr++;
|
|
if (info->signals & SerialSignal_DSR)
|
|
info->input_signal_events.dsr_up++;
|
|
else
|
|
info->input_signal_events.dsr_down++;
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
info->pending_bh |= BH_STATUS;
|
|
}
|
|
|
|
static void cts_change(struct slgt_info *info)
|
|
{
|
|
get_signals(info);
|
|
DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
|
|
if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
|
|
slgt_irq_off(info, IRQ_CTS);
|
|
return;
|
|
}
|
|
info->icount.cts++;
|
|
if (info->signals & SerialSignal_CTS)
|
|
info->input_signal_events.cts_up++;
|
|
else
|
|
info->input_signal_events.cts_down++;
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
info->pending_bh |= BH_STATUS;
|
|
|
|
if (info->flags & ASYNC_CTS_FLOW) {
|
|
if (info->tty) {
|
|
if (info->tty->hw_stopped) {
|
|
if (info->signals & SerialSignal_CTS) {
|
|
info->tty->hw_stopped = 0;
|
|
info->pending_bh |= BH_TRANSMIT;
|
|
return;
|
|
}
|
|
} else {
|
|
if (!(info->signals & SerialSignal_CTS))
|
|
info->tty->hw_stopped = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dcd_change(struct slgt_info *info)
|
|
{
|
|
get_signals(info);
|
|
DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
|
|
if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
|
|
slgt_irq_off(info, IRQ_DCD);
|
|
return;
|
|
}
|
|
info->icount.dcd++;
|
|
if (info->signals & SerialSignal_DCD) {
|
|
info->input_signal_events.dcd_up++;
|
|
} else {
|
|
info->input_signal_events.dcd_down++;
|
|
}
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (info->netcount) {
|
|
if (info->signals & SerialSignal_DCD)
|
|
netif_carrier_on(info->netdev);
|
|
else
|
|
netif_carrier_off(info->netdev);
|
|
}
|
|
#endif
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
info->pending_bh |= BH_STATUS;
|
|
|
|
if (info->flags & ASYNC_CHECK_CD) {
|
|
if (info->signals & SerialSignal_DCD)
|
|
wake_up_interruptible(&info->open_wait);
|
|
else {
|
|
if (info->tty)
|
|
tty_hangup(info->tty);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ri_change(struct slgt_info *info)
|
|
{
|
|
get_signals(info);
|
|
DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
|
|
if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
|
|
slgt_irq_off(info, IRQ_RI);
|
|
return;
|
|
}
|
|
info->icount.dcd++;
|
|
if (info->signals & SerialSignal_RI) {
|
|
info->input_signal_events.ri_up++;
|
|
} else {
|
|
info->input_signal_events.ri_down++;
|
|
}
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
info->pending_bh |= BH_STATUS;
|
|
}
|
|
|
|
static void isr_serial(struct slgt_info *info)
|
|
{
|
|
unsigned short status = rd_reg16(info, SSR);
|
|
|
|
DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
|
|
|
|
wr_reg16(info, SSR, status); /* clear pending */
|
|
|
|
info->irq_occurred = 1;
|
|
|
|
if (info->params.mode == MGSL_MODE_ASYNC) {
|
|
if (status & IRQ_TXIDLE) {
|
|
if (info->tx_count)
|
|
isr_txeom(info, status);
|
|
}
|
|
if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
|
|
info->icount.brk++;
|
|
/* process break detection if tty control allows */
|
|
if (info->tty) {
|
|
if (!(status & info->ignore_status_mask)) {
|
|
if (info->read_status_mask & MASK_BREAK) {
|
|
tty_insert_flip_char(info->tty, 0, TTY_BREAK);
|
|
if (info->flags & ASYNC_SAK)
|
|
do_SAK(info->tty);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
|
|
isr_txeom(info, status);
|
|
|
|
if (status & IRQ_RXIDLE) {
|
|
if (status & RXIDLE)
|
|
info->icount.rxidle++;
|
|
else
|
|
info->icount.exithunt++;
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
}
|
|
|
|
if (status & IRQ_RXOVER)
|
|
rx_start(info);
|
|
}
|
|
|
|
if (status & IRQ_DSR)
|
|
dsr_change(info);
|
|
if (status & IRQ_CTS)
|
|
cts_change(info);
|
|
if (status & IRQ_DCD)
|
|
dcd_change(info);
|
|
if (status & IRQ_RI)
|
|
ri_change(info);
|
|
}
|
|
|
|
static void isr_rdma(struct slgt_info *info)
|
|
{
|
|
unsigned int status = rd_reg32(info, RDCSR);
|
|
|
|
DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
|
|
|
|
/* RDCSR (rx DMA control/status)
|
|
*
|
|
* 31..07 reserved
|
|
* 06 save status byte to DMA buffer
|
|
* 05 error
|
|
* 04 eol (end of list)
|
|
* 03 eob (end of buffer)
|
|
* 02 IRQ enable
|
|
* 01 reset
|
|
* 00 enable
|
|
*/
|
|
wr_reg32(info, RDCSR, status); /* clear pending */
|
|
|
|
if (status & (BIT5 + BIT4)) {
|
|
DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
|
|
info->rx_restart = 1;
|
|
}
|
|
info->pending_bh |= BH_RECEIVE;
|
|
}
|
|
|
|
static void isr_tdma(struct slgt_info *info)
|
|
{
|
|
unsigned int status = rd_reg32(info, TDCSR);
|
|
|
|
DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
|
|
|
|
/* TDCSR (tx DMA control/status)
|
|
*
|
|
* 31..06 reserved
|
|
* 05 error
|
|
* 04 eol (end of list)
|
|
* 03 eob (end of buffer)
|
|
* 02 IRQ enable
|
|
* 01 reset
|
|
* 00 enable
|
|
*/
|
|
wr_reg32(info, TDCSR, status); /* clear pending */
|
|
|
|
if (status & (BIT5 + BIT4 + BIT3)) {
|
|
// another transmit buffer has completed
|
|
// run bottom half to get more send data from user
|
|
info->pending_bh |= BH_TRANSMIT;
|
|
}
|
|
}
|
|
|
|
static void isr_txeom(struct slgt_info *info, unsigned short status)
|
|
{
|
|
DBGISR(("%s txeom status=%04x\n", info->device_name, status));
|
|
|
|
slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
|
|
tdma_reset(info);
|
|
reset_tbufs(info);
|
|
if (status & IRQ_TXUNDER) {
|
|
unsigned short val = rd_reg16(info, TCR);
|
|
wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
|
|
wr_reg16(info, TCR, val); /* clear reset bit */
|
|
}
|
|
|
|
if (info->tx_active) {
|
|
if (info->params.mode != MGSL_MODE_ASYNC) {
|
|
if (status & IRQ_TXUNDER)
|
|
info->icount.txunder++;
|
|
else if (status & IRQ_TXIDLE)
|
|
info->icount.txok++;
|
|
}
|
|
|
|
info->tx_active = 0;
|
|
info->tx_count = 0;
|
|
|
|
del_timer(&info->tx_timer);
|
|
|
|
if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
|
|
info->signals &= ~SerialSignal_RTS;
|
|
info->drop_rts_on_tx_done = 0;
|
|
set_signals(info);
|
|
}
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (info->netcount)
|
|
hdlcdev_tx_done(info);
|
|
else
|
|
#endif
|
|
{
|
|
if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
|
|
tx_stop(info);
|
|
return;
|
|
}
|
|
info->pending_bh |= BH_TRANSMIT;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
|
|
{
|
|
struct cond_wait *w, *prev;
|
|
|
|
/* wake processes waiting for specific transitions */
|
|
for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
|
|
if (w->data & changed) {
|
|
w->data = state;
|
|
wake_up_interruptible(&w->q);
|
|
if (prev != NULL)
|
|
prev->next = w->next;
|
|
else
|
|
info->gpio_wait_q = w->next;
|
|
} else
|
|
prev = w;
|
|
}
|
|
}
|
|
|
|
/* interrupt service routine
|
|
*
|
|
* irq interrupt number
|
|
* dev_id device ID supplied during interrupt registration
|
|
*/
|
|
static irqreturn_t slgt_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct slgt_info *info;
|
|
unsigned int gsr;
|
|
unsigned int i;
|
|
|
|
DBGISR(("slgt_interrupt irq=%d entry\n", irq));
|
|
|
|
info = dev_id;
|
|
if (!info)
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&info->lock);
|
|
|
|
while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
|
|
DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
|
|
info->irq_occurred = 1;
|
|
for(i=0; i < info->port_count ; i++) {
|
|
if (info->port_array[i] == NULL)
|
|
continue;
|
|
if (gsr & (BIT8 << i))
|
|
isr_serial(info->port_array[i]);
|
|
if (gsr & (BIT16 << (i*2)))
|
|
isr_rdma(info->port_array[i]);
|
|
if (gsr & (BIT17 << (i*2)))
|
|
isr_tdma(info->port_array[i]);
|
|
}
|
|
}
|
|
|
|
if (info->gpio_present) {
|
|
unsigned int state;
|
|
unsigned int changed;
|
|
while ((changed = rd_reg32(info, IOSR)) != 0) {
|
|
DBGISR(("%s iosr=%08x\n", info->device_name, changed));
|
|
/* read latched state of GPIO signals */
|
|
state = rd_reg32(info, IOVR);
|
|
/* clear pending GPIO interrupt bits */
|
|
wr_reg32(info, IOSR, changed);
|
|
for (i=0 ; i < info->port_count ; i++) {
|
|
if (info->port_array[i] != NULL)
|
|
isr_gpio(info->port_array[i], changed, state);
|
|
}
|
|
}
|
|
}
|
|
|
|
for(i=0; i < info->port_count ; i++) {
|
|
struct slgt_info *port = info->port_array[i];
|
|
|
|
if (port && (port->count || port->netcount) &&
|
|
port->pending_bh && !port->bh_running &&
|
|
!port->bh_requested) {
|
|
DBGISR(("%s bh queued\n", port->device_name));
|
|
schedule_work(&port->task);
|
|
port->bh_requested = 1;
|
|
}
|
|
}
|
|
|
|
spin_unlock(&info->lock);
|
|
|
|
DBGISR(("slgt_interrupt irq=%d exit\n", irq));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int startup(struct slgt_info *info)
|
|
{
|
|
DBGINFO(("%s startup\n", info->device_name));
|
|
|
|
if (info->flags & ASYNC_INITIALIZED)
|
|
return 0;
|
|
|
|
if (!info->tx_buf) {
|
|
info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
|
|
if (!info->tx_buf) {
|
|
DBGERR(("%s can't allocate tx buffer\n", info->device_name));
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
info->pending_bh = 0;
|
|
|
|
memset(&info->icount, 0, sizeof(info->icount));
|
|
|
|
/* program hardware for current parameters */
|
|
change_params(info);
|
|
|
|
if (info->tty)
|
|
clear_bit(TTY_IO_ERROR, &info->tty->flags);
|
|
|
|
info->flags |= ASYNC_INITIALIZED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* called by close() and hangup() to shutdown hardware
|
|
*/
|
|
static void shutdown(struct slgt_info *info)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!(info->flags & ASYNC_INITIALIZED))
|
|
return;
|
|
|
|
DBGINFO(("%s shutdown\n", info->device_name));
|
|
|
|
/* clear status wait queue because status changes */
|
|
/* can't happen after shutting down the hardware */
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
|
|
del_timer_sync(&info->tx_timer);
|
|
del_timer_sync(&info->rx_timer);
|
|
|
|
kfree(info->tx_buf);
|
|
info->tx_buf = NULL;
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
|
|
tx_stop(info);
|
|
rx_stop(info);
|
|
|
|
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
|
|
|
|
if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
|
|
info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
|
|
set_signals(info);
|
|
}
|
|
|
|
flush_cond_wait(&info->gpio_wait_q);
|
|
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
if (info->tty)
|
|
set_bit(TTY_IO_ERROR, &info->tty->flags);
|
|
|
|
info->flags &= ~ASYNC_INITIALIZED;
|
|
}
|
|
|
|
static void program_hw(struct slgt_info *info)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
|
|
rx_stop(info);
|
|
tx_stop(info);
|
|
|
|
if (info->params.mode != MGSL_MODE_ASYNC ||
|
|
info->netcount)
|
|
sync_mode(info);
|
|
else
|
|
async_mode(info);
|
|
|
|
set_signals(info);
|
|
|
|
info->dcd_chkcount = 0;
|
|
info->cts_chkcount = 0;
|
|
info->ri_chkcount = 0;
|
|
info->dsr_chkcount = 0;
|
|
|
|
slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
|
|
get_signals(info);
|
|
|
|
if (info->netcount ||
|
|
(info->tty && info->tty->termios->c_cflag & CREAD))
|
|
rx_start(info);
|
|
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
/*
|
|
* reconfigure adapter based on new parameters
|
|
*/
|
|
static void change_params(struct slgt_info *info)
|
|
{
|
|
unsigned cflag;
|
|
int bits_per_char;
|
|
|
|
if (!info->tty || !info->tty->termios)
|
|
return;
|
|
DBGINFO(("%s change_params\n", info->device_name));
|
|
|
|
cflag = info->tty->termios->c_cflag;
|
|
|
|
/* if B0 rate (hangup) specified then negate DTR and RTS */
|
|
/* otherwise assert DTR and RTS */
|
|
if (cflag & CBAUD)
|
|
info->signals |= SerialSignal_RTS + SerialSignal_DTR;
|
|
else
|
|
info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
|
|
|
|
/* byte size and parity */
|
|
|
|
switch (cflag & CSIZE) {
|
|
case CS5: info->params.data_bits = 5; break;
|
|
case CS6: info->params.data_bits = 6; break;
|
|
case CS7: info->params.data_bits = 7; break;
|
|
case CS8: info->params.data_bits = 8; break;
|
|
default: info->params.data_bits = 7; break;
|
|
}
|
|
|
|
info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
|
|
|
|
if (cflag & PARENB)
|
|
info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
|
|
else
|
|
info->params.parity = ASYNC_PARITY_NONE;
|
|
|
|
/* calculate number of jiffies to transmit a full
|
|
* FIFO (32 bytes) at specified data rate
|
|
*/
|
|
bits_per_char = info->params.data_bits +
|
|
info->params.stop_bits + 1;
|
|
|
|
info->params.data_rate = tty_get_baud_rate(info->tty);
|
|
|
|
if (info->params.data_rate) {
|
|
info->timeout = (32*HZ*bits_per_char) /
|
|
info->params.data_rate;
|
|
}
|
|
info->timeout += HZ/50; /* Add .02 seconds of slop */
|
|
|
|
if (cflag & CRTSCTS)
|
|
info->flags |= ASYNC_CTS_FLOW;
|
|
else
|
|
info->flags &= ~ASYNC_CTS_FLOW;
|
|
|
|
if (cflag & CLOCAL)
|
|
info->flags &= ~ASYNC_CHECK_CD;
|
|
else
|
|
info->flags |= ASYNC_CHECK_CD;
|
|
|
|
/* process tty input control flags */
|
|
|
|
info->read_status_mask = IRQ_RXOVER;
|
|
if (I_INPCK(info->tty))
|
|
info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
|
|
if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
|
|
info->read_status_mask |= MASK_BREAK;
|
|
if (I_IGNPAR(info->tty))
|
|
info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
|
|
if (I_IGNBRK(info->tty)) {
|
|
info->ignore_status_mask |= MASK_BREAK;
|
|
/* If ignoring parity and break indicators, ignore
|
|
* overruns too. (For real raw support).
|
|
*/
|
|
if (I_IGNPAR(info->tty))
|
|
info->ignore_status_mask |= MASK_OVERRUN;
|
|
}
|
|
|
|
program_hw(info);
|
|
}
|
|
|
|
static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
|
|
{
|
|
DBGINFO(("%s get_stats\n", info->device_name));
|
|
if (!user_icount) {
|
|
memset(&info->icount, 0, sizeof(info->icount));
|
|
} else {
|
|
if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
|
|
return -EFAULT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
|
|
{
|
|
DBGINFO(("%s get_params\n", info->device_name));
|
|
if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
|
|
{
|
|
unsigned long flags;
|
|
MGSL_PARAMS tmp_params;
|
|
|
|
DBGINFO(("%s set_params\n", info->device_name));
|
|
if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
|
|
return -EFAULT;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
change_params(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int get_txidle(struct slgt_info *info, int __user *idle_mode)
|
|
{
|
|
DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
|
|
if (put_user(info->idle_mode, idle_mode))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int set_txidle(struct slgt_info *info, int idle_mode)
|
|
{
|
|
unsigned long flags;
|
|
DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
info->idle_mode = idle_mode;
|
|
if (info->params.mode != MGSL_MODE_ASYNC)
|
|
tx_set_idle(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
return 0;
|
|
}
|
|
|
|
static int tx_enable(struct slgt_info *info, int enable)
|
|
{
|
|
unsigned long flags;
|
|
DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (enable) {
|
|
if (!info->tx_enabled)
|
|
tx_start(info);
|
|
} else {
|
|
if (info->tx_enabled)
|
|
tx_stop(info);
|
|
}
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* abort transmit HDLC frame
|
|
*/
|
|
static int tx_abort(struct slgt_info *info)
|
|
{
|
|
unsigned long flags;
|
|
DBGINFO(("%s tx_abort\n", info->device_name));
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
tdma_reset(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
return 0;
|
|
}
|
|
|
|
static int rx_enable(struct slgt_info *info, int enable)
|
|
{
|
|
unsigned long flags;
|
|
DBGINFO(("%s rx_enable(%d)\n", info->device_name, enable));
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (enable) {
|
|
if (!info->rx_enabled)
|
|
rx_start(info);
|
|
else if (enable == 2) {
|
|
/* force hunt mode (write 1 to RCR[3]) */
|
|
wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
|
|
}
|
|
} else {
|
|
if (info->rx_enabled)
|
|
rx_stop(info);
|
|
}
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* wait for specified event to occur
|
|
*/
|
|
static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
|
|
{
|
|
unsigned long flags;
|
|
int s;
|
|
int rc=0;
|
|
struct mgsl_icount cprev, cnow;
|
|
int events;
|
|
int mask;
|
|
struct _input_signal_events oldsigs, newsigs;
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
if (get_user(mask, mask_ptr))
|
|
return -EFAULT;
|
|
|
|
DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
|
|
/* return immediately if state matches requested events */
|
|
get_signals(info);
|
|
s = info->signals;
|
|
|
|
events = mask &
|
|
( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
|
|
((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
|
|
((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
|
|
((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
|
|
if (events) {
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
goto exit;
|
|
}
|
|
|
|
/* save current irq counts */
|
|
cprev = info->icount;
|
|
oldsigs = info->input_signal_events;
|
|
|
|
/* enable hunt and idle irqs if needed */
|
|
if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
|
|
unsigned short val = rd_reg16(info, SCR);
|
|
if (!(val & IRQ_RXIDLE))
|
|
wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
|
|
}
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
add_wait_queue(&info->event_wait_q, &wait);
|
|
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
for(;;) {
|
|
schedule();
|
|
if (signal_pending(current)) {
|
|
rc = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
|
|
/* get current irq counts */
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
cnow = info->icount;
|
|
newsigs = info->input_signal_events;
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
/* if no change, wait aborted for some reason */
|
|
if (newsigs.dsr_up == oldsigs.dsr_up &&
|
|
newsigs.dsr_down == oldsigs.dsr_down &&
|
|
newsigs.dcd_up == oldsigs.dcd_up &&
|
|
newsigs.dcd_down == oldsigs.dcd_down &&
|
|
newsigs.cts_up == oldsigs.cts_up &&
|
|
newsigs.cts_down == oldsigs.cts_down &&
|
|
newsigs.ri_up == oldsigs.ri_up &&
|
|
newsigs.ri_down == oldsigs.ri_down &&
|
|
cnow.exithunt == cprev.exithunt &&
|
|
cnow.rxidle == cprev.rxidle) {
|
|
rc = -EIO;
|
|
break;
|
|
}
|
|
|
|
events = mask &
|
|
( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
|
|
(newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
|
|
(newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
|
|
(newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
|
|
(newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
|
|
(newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
|
|
(newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
|
|
(newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
|
|
(cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
|
|
(cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
|
|
if (events)
|
|
break;
|
|
|
|
cprev = cnow;
|
|
oldsigs = newsigs;
|
|
}
|
|
|
|
remove_wait_queue(&info->event_wait_q, &wait);
|
|
set_current_state(TASK_RUNNING);
|
|
|
|
|
|
if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (!waitqueue_active(&info->event_wait_q)) {
|
|
/* disable enable exit hunt mode/idle rcvd IRQs */
|
|
wr_reg16(info, SCR,
|
|
(unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
|
|
}
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
exit:
|
|
if (rc == 0)
|
|
rc = put_user(events, mask_ptr);
|
|
return rc;
|
|
}
|
|
|
|
static int get_interface(struct slgt_info *info, int __user *if_mode)
|
|
{
|
|
DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
|
|
if (put_user(info->if_mode, if_mode))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int set_interface(struct slgt_info *info, int if_mode)
|
|
{
|
|
unsigned long flags;
|
|
unsigned short val;
|
|
|
|
DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
info->if_mode = if_mode;
|
|
|
|
msc_set_vcr(info);
|
|
|
|
/* TCR (tx control) 07 1=RTS driver control */
|
|
val = rd_reg16(info, TCR);
|
|
if (info->if_mode & MGSL_INTERFACE_RTS_EN)
|
|
val |= BIT7;
|
|
else
|
|
val &= ~BIT7;
|
|
wr_reg16(info, TCR, val);
|
|
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* set general purpose IO pin state and direction
|
|
*
|
|
* user_gpio fields:
|
|
* state each bit indicates a pin state
|
|
* smask set bit indicates pin state to set
|
|
* dir each bit indicates a pin direction (0=input, 1=output)
|
|
* dmask set bit indicates pin direction to set
|
|
*/
|
|
static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
|
|
{
|
|
unsigned long flags;
|
|
struct gpio_desc gpio;
|
|
__u32 data;
|
|
|
|
if (!info->gpio_present)
|
|
return -EINVAL;
|
|
if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
|
|
return -EFAULT;
|
|
DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
|
|
info->device_name, gpio.state, gpio.smask,
|
|
gpio.dir, gpio.dmask));
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
if (gpio.dmask) {
|
|
data = rd_reg32(info, IODR);
|
|
data |= gpio.dmask & gpio.dir;
|
|
data &= ~(gpio.dmask & ~gpio.dir);
|
|
wr_reg32(info, IODR, data);
|
|
}
|
|
if (gpio.smask) {
|
|
data = rd_reg32(info, IOVR);
|
|
data |= gpio.smask & gpio.state;
|
|
data &= ~(gpio.smask & ~gpio.state);
|
|
wr_reg32(info, IOVR, data);
|
|
}
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* get general purpose IO pin state and direction
|
|
*/
|
|
static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
|
|
{
|
|
struct gpio_desc gpio;
|
|
if (!info->gpio_present)
|
|
return -EINVAL;
|
|
gpio.state = rd_reg32(info, IOVR);
|
|
gpio.smask = 0xffffffff;
|
|
gpio.dir = rd_reg32(info, IODR);
|
|
gpio.dmask = 0xffffffff;
|
|
if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
|
|
return -EFAULT;
|
|
DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
|
|
info->device_name, gpio.state, gpio.dir));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* conditional wait facility
|
|
*/
|
|
static void init_cond_wait(struct cond_wait *w, unsigned int data)
|
|
{
|
|
init_waitqueue_head(&w->q);
|
|
init_waitqueue_entry(&w->wait, current);
|
|
w->data = data;
|
|
}
|
|
|
|
static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
|
|
{
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
add_wait_queue(&w->q, &w->wait);
|
|
w->next = *head;
|
|
*head = w;
|
|
}
|
|
|
|
static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
|
|
{
|
|
struct cond_wait *w, *prev;
|
|
remove_wait_queue(&cw->q, &cw->wait);
|
|
set_current_state(TASK_RUNNING);
|
|
for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
|
|
if (w == cw) {
|
|
if (prev != NULL)
|
|
prev->next = w->next;
|
|
else
|
|
*head = w->next;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void flush_cond_wait(struct cond_wait **head)
|
|
{
|
|
while (*head != NULL) {
|
|
wake_up_interruptible(&(*head)->q);
|
|
*head = (*head)->next;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* wait for general purpose I/O pin(s) to enter specified state
|
|
*
|
|
* user_gpio fields:
|
|
* state - bit indicates target pin state
|
|
* smask - set bit indicates watched pin
|
|
*
|
|
* The wait ends when at least one watched pin enters the specified
|
|
* state. When 0 (no error) is returned, user_gpio->state is set to the
|
|
* state of all GPIO pins when the wait ends.
|
|
*
|
|
* Note: Each pin may be a dedicated input, dedicated output, or
|
|
* configurable input/output. The number and configuration of pins
|
|
* varies with the specific adapter model. Only input pins (dedicated
|
|
* or configured) can be monitored with this function.
|
|
*/
|
|
static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
|
|
{
|
|
unsigned long flags;
|
|
int rc = 0;
|
|
struct gpio_desc gpio;
|
|
struct cond_wait wait;
|
|
u32 state;
|
|
|
|
if (!info->gpio_present)
|
|
return -EINVAL;
|
|
if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
|
|
return -EFAULT;
|
|
DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
|
|
info->device_name, gpio.state, gpio.smask));
|
|
/* ignore output pins identified by set IODR bit */
|
|
if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
|
|
return -EINVAL;
|
|
init_cond_wait(&wait, gpio.smask);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
/* enable interrupts for watched pins */
|
|
wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
|
|
/* get current pin states */
|
|
state = rd_reg32(info, IOVR);
|
|
|
|
if (gpio.smask & ~(state ^ gpio.state)) {
|
|
/* already in target state */
|
|
gpio.state = state;
|
|
} else {
|
|
/* wait for target state */
|
|
add_cond_wait(&info->gpio_wait_q, &wait);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
schedule();
|
|
if (signal_pending(current))
|
|
rc = -ERESTARTSYS;
|
|
else
|
|
gpio.state = wait.data;
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
remove_cond_wait(&info->gpio_wait_q, &wait);
|
|
}
|
|
|
|
/* disable all GPIO interrupts if no waiting processes */
|
|
if (info->gpio_wait_q == NULL)
|
|
wr_reg32(info, IOER, 0);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
|
|
rc = -EFAULT;
|
|
return rc;
|
|
}
|
|
|
|
static int modem_input_wait(struct slgt_info *info,int arg)
|
|
{
|
|
unsigned long flags;
|
|
int rc;
|
|
struct mgsl_icount cprev, cnow;
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
/* save current irq counts */
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
cprev = info->icount;
|
|
add_wait_queue(&info->status_event_wait_q, &wait);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
for(;;) {
|
|
schedule();
|
|
if (signal_pending(current)) {
|
|
rc = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
|
|
/* get new irq counts */
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
cnow = info->icount;
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
/* if no change, wait aborted for some reason */
|
|
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
|
|
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
|
|
rc = -EIO;
|
|
break;
|
|
}
|
|
|
|
/* check for change in caller specified modem input */
|
|
if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
|
|
(arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
|
|
(arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
|
|
(arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
|
|
rc = 0;
|
|
break;
|
|
}
|
|
|
|
cprev = cnow;
|
|
}
|
|
remove_wait_queue(&info->status_event_wait_q, &wait);
|
|
set_current_state(TASK_RUNNING);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* return state of serial control and status signals
|
|
*/
|
|
static int tiocmget(struct tty_struct *tty, struct file *file)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned int result;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
get_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
|
|
((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
|
|
((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
|
|
((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
|
|
((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
|
|
((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
|
|
|
|
DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* set modem control signals (DTR/RTS)
|
|
*
|
|
* cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
|
|
* TIOCMSET = set/clear signal values
|
|
* value bit mask for command
|
|
*/
|
|
static int tiocmset(struct tty_struct *tty, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct slgt_info *info = tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
|
|
|
|
if (set & TIOCM_RTS)
|
|
info->signals |= SerialSignal_RTS;
|
|
if (set & TIOCM_DTR)
|
|
info->signals |= SerialSignal_DTR;
|
|
if (clear & TIOCM_RTS)
|
|
info->signals &= ~SerialSignal_RTS;
|
|
if (clear & TIOCM_DTR)
|
|
info->signals &= ~SerialSignal_DTR;
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* block current process until the device is ready to open
|
|
*/
|
|
static int block_til_ready(struct tty_struct *tty, struct file *filp,
|
|
struct slgt_info *info)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
int retval;
|
|
int do_clocal = 0, extra_count = 0;
|
|
unsigned long flags;
|
|
|
|
DBGINFO(("%s block_til_ready\n", tty->driver->name));
|
|
|
|
if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
|
|
/* nonblock mode is set or port is not enabled */
|
|
info->flags |= ASYNC_NORMAL_ACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
if (tty->termios->c_cflag & CLOCAL)
|
|
do_clocal = 1;
|
|
|
|
/* Wait for carrier detect and the line to become
|
|
* free (i.e., not in use by the callout). While we are in
|
|
* this loop, info->count is dropped by one, so that
|
|
* close() knows when to free things. We restore it upon
|
|
* exit, either normal or abnormal.
|
|
*/
|
|
|
|
retval = 0;
|
|
add_wait_queue(&info->open_wait, &wait);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (!tty_hung_up_p(filp)) {
|
|
extra_count = 1;
|
|
info->count--;
|
|
}
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
info->blocked_open++;
|
|
|
|
while (1) {
|
|
if ((tty->termios->c_cflag & CBAUD)) {
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
info->signals |= SerialSignal_RTS + SerialSignal_DTR;
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
|
|
retval = (info->flags & ASYNC_HUP_NOTIFY) ?
|
|
-EAGAIN : -ERESTARTSYS;
|
|
break;
|
|
}
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
get_signals(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
if (!(info->flags & ASYNC_CLOSING) &&
|
|
(do_clocal || (info->signals & SerialSignal_DCD)) ) {
|
|
break;
|
|
}
|
|
|
|
if (signal_pending(current)) {
|
|
retval = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
|
|
DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
|
|
schedule();
|
|
}
|
|
|
|
set_current_state(TASK_RUNNING);
|
|
remove_wait_queue(&info->open_wait, &wait);
|
|
|
|
if (extra_count)
|
|
info->count++;
|
|
info->blocked_open--;
|
|
|
|
if (!retval)
|
|
info->flags |= ASYNC_NORMAL_ACTIVE;
|
|
|
|
DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
|
|
return retval;
|
|
}
|
|
|
|
static int alloc_tmp_rbuf(struct slgt_info *info)
|
|
{
|
|
info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
|
|
if (info->tmp_rbuf == NULL)
|
|
return -ENOMEM;
|
|
return 0;
|
|
}
|
|
|
|
static void free_tmp_rbuf(struct slgt_info *info)
|
|
{
|
|
kfree(info->tmp_rbuf);
|
|
info->tmp_rbuf = NULL;
|
|
}
|
|
|
|
/*
|
|
* allocate DMA descriptor lists.
|
|
*/
|
|
static int alloc_desc(struct slgt_info *info)
|
|
{
|
|
unsigned int i;
|
|
unsigned int pbufs;
|
|
|
|
/* allocate memory to hold descriptor lists */
|
|
info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
|
|
if (info->bufs == NULL)
|
|
return -ENOMEM;
|
|
|
|
memset(info->bufs, 0, DESC_LIST_SIZE);
|
|
|
|
info->rbufs = (struct slgt_desc*)info->bufs;
|
|
info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
|
|
|
|
pbufs = (unsigned int)info->bufs_dma_addr;
|
|
|
|
/*
|
|
* Build circular lists of descriptors
|
|
*/
|
|
|
|
for (i=0; i < info->rbuf_count; i++) {
|
|
/* physical address of this descriptor */
|
|
info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
|
|
|
|
/* physical address of next descriptor */
|
|
if (i == info->rbuf_count - 1)
|
|
info->rbufs[i].next = cpu_to_le32(pbufs);
|
|
else
|
|
info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
|
|
set_desc_count(info->rbufs[i], DMABUFSIZE);
|
|
}
|
|
|
|
for (i=0; i < info->tbuf_count; i++) {
|
|
/* physical address of this descriptor */
|
|
info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
|
|
|
|
/* physical address of next descriptor */
|
|
if (i == info->tbuf_count - 1)
|
|
info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
|
|
else
|
|
info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void free_desc(struct slgt_info *info)
|
|
{
|
|
if (info->bufs != NULL) {
|
|
pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
|
|
info->bufs = NULL;
|
|
info->rbufs = NULL;
|
|
info->tbufs = NULL;
|
|
}
|
|
}
|
|
|
|
static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
|
|
{
|
|
int i;
|
|
for (i=0; i < count; i++) {
|
|
if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
|
|
return -ENOMEM;
|
|
bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
|
|
{
|
|
int i;
|
|
for (i=0; i < count; i++) {
|
|
if (bufs[i].buf == NULL)
|
|
continue;
|
|
pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
|
|
bufs[i].buf = NULL;
|
|
}
|
|
}
|
|
|
|
static int alloc_dma_bufs(struct slgt_info *info)
|
|
{
|
|
info->rbuf_count = 32;
|
|
info->tbuf_count = 32;
|
|
|
|
if (alloc_desc(info) < 0 ||
|
|
alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
|
|
alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
|
|
alloc_tmp_rbuf(info) < 0) {
|
|
DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
|
|
return -ENOMEM;
|
|
}
|
|
reset_rbufs(info);
|
|
return 0;
|
|
}
|
|
|
|
static void free_dma_bufs(struct slgt_info *info)
|
|
{
|
|
if (info->bufs) {
|
|
free_bufs(info, info->rbufs, info->rbuf_count);
|
|
free_bufs(info, info->tbufs, info->tbuf_count);
|
|
free_desc(info);
|
|
}
|
|
free_tmp_rbuf(info);
|
|
}
|
|
|
|
static int claim_resources(struct slgt_info *info)
|
|
{
|
|
if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
|
|
DBGERR(("%s reg addr conflict, addr=%08X\n",
|
|
info->device_name, info->phys_reg_addr));
|
|
info->init_error = DiagStatus_AddressConflict;
|
|
goto errout;
|
|
}
|
|
else
|
|
info->reg_addr_requested = 1;
|
|
|
|
info->reg_addr = ioremap(info->phys_reg_addr, SLGT_REG_SIZE);
|
|
if (!info->reg_addr) {
|
|
DBGERR(("%s cant map device registers, addr=%08X\n",
|
|
info->device_name, info->phys_reg_addr));
|
|
info->init_error = DiagStatus_CantAssignPciResources;
|
|
goto errout;
|
|
}
|
|
return 0;
|
|
|
|
errout:
|
|
release_resources(info);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void release_resources(struct slgt_info *info)
|
|
{
|
|
if (info->irq_requested) {
|
|
free_irq(info->irq_level, info);
|
|
info->irq_requested = 0;
|
|
}
|
|
|
|
if (info->reg_addr_requested) {
|
|
release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
|
|
info->reg_addr_requested = 0;
|
|
}
|
|
|
|
if (info->reg_addr) {
|
|
iounmap(info->reg_addr);
|
|
info->reg_addr = NULL;
|
|
}
|
|
}
|
|
|
|
/* Add the specified device instance data structure to the
|
|
* global linked list of devices and increment the device count.
|
|
*/
|
|
static void add_device(struct slgt_info *info)
|
|
{
|
|
char *devstr;
|
|
|
|
info->next_device = NULL;
|
|
info->line = slgt_device_count;
|
|
sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
|
|
|
|
if (info->line < MAX_DEVICES) {
|
|
if (maxframe[info->line])
|
|
info->max_frame_size = maxframe[info->line];
|
|
info->dosyncppp = dosyncppp[info->line];
|
|
}
|
|
|
|
slgt_device_count++;
|
|
|
|
if (!slgt_device_list)
|
|
slgt_device_list = info;
|
|
else {
|
|
struct slgt_info *current_dev = slgt_device_list;
|
|
while(current_dev->next_device)
|
|
current_dev = current_dev->next_device;
|
|
current_dev->next_device = info;
|
|
}
|
|
|
|
if (info->max_frame_size < 4096)
|
|
info->max_frame_size = 4096;
|
|
else if (info->max_frame_size > 65535)
|
|
info->max_frame_size = 65535;
|
|
|
|
switch(info->pdev->device) {
|
|
case SYNCLINK_GT_DEVICE_ID:
|
|
devstr = "GT";
|
|
break;
|
|
case SYNCLINK_GT2_DEVICE_ID:
|
|
devstr = "GT2";
|
|
break;
|
|
case SYNCLINK_GT4_DEVICE_ID:
|
|
devstr = "GT4";
|
|
break;
|
|
case SYNCLINK_AC_DEVICE_ID:
|
|
devstr = "AC";
|
|
info->params.mode = MGSL_MODE_ASYNC;
|
|
break;
|
|
default:
|
|
devstr = "(unknown model)";
|
|
}
|
|
printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
|
|
devstr, info->device_name, info->phys_reg_addr,
|
|
info->irq_level, info->max_frame_size);
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
hdlcdev_init(info);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* allocate device instance structure, return NULL on failure
|
|
*/
|
|
static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
|
|
{
|
|
struct slgt_info *info;
|
|
|
|
info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
|
|
|
|
if (!info) {
|
|
DBGERR(("%s device alloc failed adapter=%d port=%d\n",
|
|
driver_name, adapter_num, port_num));
|
|
} else {
|
|
info->magic = MGSL_MAGIC;
|
|
INIT_WORK(&info->task, bh_handler);
|
|
info->max_frame_size = 4096;
|
|
info->raw_rx_size = DMABUFSIZE;
|
|
info->close_delay = 5*HZ/10;
|
|
info->closing_wait = 30*HZ;
|
|
init_waitqueue_head(&info->open_wait);
|
|
init_waitqueue_head(&info->close_wait);
|
|
init_waitqueue_head(&info->status_event_wait_q);
|
|
init_waitqueue_head(&info->event_wait_q);
|
|
spin_lock_init(&info->netlock);
|
|
memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
|
|
info->idle_mode = HDLC_TXIDLE_FLAGS;
|
|
info->adapter_num = adapter_num;
|
|
info->port_num = port_num;
|
|
|
|
setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
|
|
setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
|
|
|
|
/* Copy configuration info to device instance data */
|
|
info->pdev = pdev;
|
|
info->irq_level = pdev->irq;
|
|
info->phys_reg_addr = pci_resource_start(pdev,0);
|
|
|
|
info->bus_type = MGSL_BUS_TYPE_PCI;
|
|
info->irq_flags = IRQF_SHARED;
|
|
|
|
info->init_error = -1; /* assume error, set to 0 on successful init */
|
|
}
|
|
|
|
return info;
|
|
}
|
|
|
|
static void device_init(int adapter_num, struct pci_dev *pdev)
|
|
{
|
|
struct slgt_info *port_array[SLGT_MAX_PORTS];
|
|
int i;
|
|
int port_count = 1;
|
|
|
|
if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
|
|
port_count = 2;
|
|
else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
|
|
port_count = 4;
|
|
|
|
/* allocate device instances for all ports */
|
|
for (i=0; i < port_count; ++i) {
|
|
port_array[i] = alloc_dev(adapter_num, i, pdev);
|
|
if (port_array[i] == NULL) {
|
|
for (--i; i >= 0; --i)
|
|
kfree(port_array[i]);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* give copy of port_array to all ports and add to device list */
|
|
for (i=0; i < port_count; ++i) {
|
|
memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
|
|
add_device(port_array[i]);
|
|
port_array[i]->port_count = port_count;
|
|
spin_lock_init(&port_array[i]->lock);
|
|
}
|
|
|
|
/* Allocate and claim adapter resources */
|
|
if (!claim_resources(port_array[0])) {
|
|
|
|
alloc_dma_bufs(port_array[0]);
|
|
|
|
/* copy resource information from first port to others */
|
|
for (i = 1; i < port_count; ++i) {
|
|
port_array[i]->lock = port_array[0]->lock;
|
|
port_array[i]->irq_level = port_array[0]->irq_level;
|
|
port_array[i]->reg_addr = port_array[0]->reg_addr;
|
|
alloc_dma_bufs(port_array[i]);
|
|
}
|
|
|
|
if (request_irq(port_array[0]->irq_level,
|
|
slgt_interrupt,
|
|
port_array[0]->irq_flags,
|
|
port_array[0]->device_name,
|
|
port_array[0]) < 0) {
|
|
DBGERR(("%s request_irq failed IRQ=%d\n",
|
|
port_array[0]->device_name,
|
|
port_array[0]->irq_level));
|
|
} else {
|
|
port_array[0]->irq_requested = 1;
|
|
adapter_test(port_array[0]);
|
|
for (i=1 ; i < port_count ; i++) {
|
|
port_array[i]->init_error = port_array[0]->init_error;
|
|
port_array[i]->gpio_present = port_array[0]->gpio_present;
|
|
}
|
|
}
|
|
}
|
|
|
|
for (i=0; i < port_count; ++i)
|
|
tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
|
|
}
|
|
|
|
static int __devinit init_one(struct pci_dev *dev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
if (pci_enable_device(dev)) {
|
|
printk("error enabling pci device %p\n", dev);
|
|
return -EIO;
|
|
}
|
|
pci_set_master(dev);
|
|
device_init(slgt_device_count, dev);
|
|
return 0;
|
|
}
|
|
|
|
static void __devexit remove_one(struct pci_dev *dev)
|
|
{
|
|
}
|
|
|
|
static const struct tty_operations ops = {
|
|
.open = open,
|
|
.close = close,
|
|
.write = write,
|
|
.put_char = put_char,
|
|
.flush_chars = flush_chars,
|
|
.write_room = write_room,
|
|
.chars_in_buffer = chars_in_buffer,
|
|
.flush_buffer = flush_buffer,
|
|
.ioctl = ioctl,
|
|
.compat_ioctl = slgt_compat_ioctl,
|
|
.throttle = throttle,
|
|
.unthrottle = unthrottle,
|
|
.send_xchar = send_xchar,
|
|
.break_ctl = set_break,
|
|
.wait_until_sent = wait_until_sent,
|
|
.read_proc = read_proc,
|
|
.set_termios = set_termios,
|
|
.stop = tx_hold,
|
|
.start = tx_release,
|
|
.hangup = hangup,
|
|
.tiocmget = tiocmget,
|
|
.tiocmset = tiocmset,
|
|
};
|
|
|
|
static void slgt_cleanup(void)
|
|
{
|
|
int rc;
|
|
struct slgt_info *info;
|
|
struct slgt_info *tmp;
|
|
|
|
printk("unload %s %s\n", driver_name, driver_version);
|
|
|
|
if (serial_driver) {
|
|
for (info=slgt_device_list ; info != NULL ; info=info->next_device)
|
|
tty_unregister_device(serial_driver, info->line);
|
|
if ((rc = tty_unregister_driver(serial_driver)))
|
|
DBGERR(("tty_unregister_driver error=%d\n", rc));
|
|
put_tty_driver(serial_driver);
|
|
}
|
|
|
|
/* reset devices */
|
|
info = slgt_device_list;
|
|
while(info) {
|
|
reset_port(info);
|
|
info = info->next_device;
|
|
}
|
|
|
|
/* release devices */
|
|
info = slgt_device_list;
|
|
while(info) {
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
hdlcdev_exit(info);
|
|
#endif
|
|
free_dma_bufs(info);
|
|
free_tmp_rbuf(info);
|
|
if (info->port_num == 0)
|
|
release_resources(info);
|
|
tmp = info;
|
|
info = info->next_device;
|
|
kfree(tmp);
|
|
}
|
|
|
|
if (pci_registered)
|
|
pci_unregister_driver(&pci_driver);
|
|
}
|
|
|
|
/*
|
|
* Driver initialization entry point.
|
|
*/
|
|
static int __init slgt_init(void)
|
|
{
|
|
int rc;
|
|
|
|
printk("%s %s\n", driver_name, driver_version);
|
|
|
|
serial_driver = alloc_tty_driver(MAX_DEVICES);
|
|
if (!serial_driver) {
|
|
printk("%s can't allocate tty driver\n", driver_name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Initialize the tty_driver structure */
|
|
|
|
serial_driver->owner = THIS_MODULE;
|
|
serial_driver->driver_name = tty_driver_name;
|
|
serial_driver->name = tty_dev_prefix;
|
|
serial_driver->major = ttymajor;
|
|
serial_driver->minor_start = 64;
|
|
serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
|
|
serial_driver->subtype = SERIAL_TYPE_NORMAL;
|
|
serial_driver->init_termios = tty_std_termios;
|
|
serial_driver->init_termios.c_cflag =
|
|
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
|
|
serial_driver->init_termios.c_ispeed = 9600;
|
|
serial_driver->init_termios.c_ospeed = 9600;
|
|
serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
|
|
tty_set_operations(serial_driver, &ops);
|
|
if ((rc = tty_register_driver(serial_driver)) < 0) {
|
|
DBGERR(("%s can't register serial driver\n", driver_name));
|
|
put_tty_driver(serial_driver);
|
|
serial_driver = NULL;
|
|
goto error;
|
|
}
|
|
|
|
printk("%s %s, tty major#%d\n",
|
|
driver_name, driver_version,
|
|
serial_driver->major);
|
|
|
|
slgt_device_count = 0;
|
|
if ((rc = pci_register_driver(&pci_driver)) < 0) {
|
|
printk("%s pci_register_driver error=%d\n", driver_name, rc);
|
|
goto error;
|
|
}
|
|
pci_registered = 1;
|
|
|
|
if (!slgt_device_list)
|
|
printk("%s no devices found\n",driver_name);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
slgt_cleanup();
|
|
return rc;
|
|
}
|
|
|
|
static void __exit slgt_exit(void)
|
|
{
|
|
slgt_cleanup();
|
|
}
|
|
|
|
module_init(slgt_init);
|
|
module_exit(slgt_exit);
|
|
|
|
/*
|
|
* register access routines
|
|
*/
|
|
|
|
#define CALC_REGADDR() \
|
|
unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
|
|
if (addr >= 0x80) \
|
|
reg_addr += (info->port_num) * 32;
|
|
|
|
static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
|
|
{
|
|
CALC_REGADDR();
|
|
return readb((void __iomem *)reg_addr);
|
|
}
|
|
|
|
static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
|
|
{
|
|
CALC_REGADDR();
|
|
writeb(value, (void __iomem *)reg_addr);
|
|
}
|
|
|
|
static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
|
|
{
|
|
CALC_REGADDR();
|
|
return readw((void __iomem *)reg_addr);
|
|
}
|
|
|
|
static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
|
|
{
|
|
CALC_REGADDR();
|
|
writew(value, (void __iomem *)reg_addr);
|
|
}
|
|
|
|
static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
|
|
{
|
|
CALC_REGADDR();
|
|
return readl((void __iomem *)reg_addr);
|
|
}
|
|
|
|
static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
|
|
{
|
|
CALC_REGADDR();
|
|
writel(value, (void __iomem *)reg_addr);
|
|
}
|
|
|
|
static void rdma_reset(struct slgt_info *info)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* set reset bit */
|
|
wr_reg32(info, RDCSR, BIT1);
|
|
|
|
/* wait for enable bit cleared */
|
|
for(i=0 ; i < 1000 ; i++)
|
|
if (!(rd_reg32(info, RDCSR) & BIT0))
|
|
break;
|
|
}
|
|
|
|
static void tdma_reset(struct slgt_info *info)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* set reset bit */
|
|
wr_reg32(info, TDCSR, BIT1);
|
|
|
|
/* wait for enable bit cleared */
|
|
for(i=0 ; i < 1000 ; i++)
|
|
if (!(rd_reg32(info, TDCSR) & BIT0))
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* enable internal loopback
|
|
* TxCLK and RxCLK are generated from BRG
|
|
* and TxD is looped back to RxD internally.
|
|
*/
|
|
static void enable_loopback(struct slgt_info *info)
|
|
{
|
|
/* SCR (serial control) BIT2=looopback enable */
|
|
wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
|
|
|
|
if (info->params.mode != MGSL_MODE_ASYNC) {
|
|
/* CCR (clock control)
|
|
* 07..05 tx clock source (010 = BRG)
|
|
* 04..02 rx clock source (010 = BRG)
|
|
* 01 auxclk enable (0 = disable)
|
|
* 00 BRG enable (1 = enable)
|
|
*
|
|
* 0100 1001
|
|
*/
|
|
wr_reg8(info, CCR, 0x49);
|
|
|
|
/* set speed if available, otherwise use default */
|
|
if (info->params.clock_speed)
|
|
set_rate(info, info->params.clock_speed);
|
|
else
|
|
set_rate(info, 3686400);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* set baud rate generator to specified rate
|
|
*/
|
|
static void set_rate(struct slgt_info *info, u32 rate)
|
|
{
|
|
unsigned int div;
|
|
static unsigned int osc = 14745600;
|
|
|
|
/* div = osc/rate - 1
|
|
*
|
|
* Round div up if osc/rate is not integer to
|
|
* force to next slowest rate.
|
|
*/
|
|
|
|
if (rate) {
|
|
div = osc/rate;
|
|
if (!(osc % rate) && div)
|
|
div--;
|
|
wr_reg16(info, BDR, (unsigned short)div);
|
|
}
|
|
}
|
|
|
|
static void rx_stop(struct slgt_info *info)
|
|
{
|
|
unsigned short val;
|
|
|
|
/* disable and reset receiver */
|
|
val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
|
|
wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
|
|
wr_reg16(info, RCR, val); /* clear reset bit */
|
|
|
|
slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
|
|
|
|
/* clear pending rx interrupts */
|
|
wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
|
|
|
|
rdma_reset(info);
|
|
|
|
info->rx_enabled = 0;
|
|
info->rx_restart = 0;
|
|
}
|
|
|
|
static void rx_start(struct slgt_info *info)
|
|
{
|
|
unsigned short val;
|
|
|
|
slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
|
|
|
|
/* clear pending rx overrun IRQ */
|
|
wr_reg16(info, SSR, IRQ_RXOVER);
|
|
|
|
/* reset and disable receiver */
|
|
val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
|
|
wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
|
|
wr_reg16(info, RCR, val); /* clear reset bit */
|
|
|
|
rdma_reset(info);
|
|
reset_rbufs(info);
|
|
|
|
/* set 1st descriptor address */
|
|
wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
|
|
|
|
if (info->params.mode != MGSL_MODE_ASYNC) {
|
|
/* enable rx DMA and DMA interrupt */
|
|
wr_reg32(info, RDCSR, (BIT2 + BIT0));
|
|
} else {
|
|
/* enable saving of rx status, rx DMA and DMA interrupt */
|
|
wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
|
|
}
|
|
|
|
slgt_irq_on(info, IRQ_RXOVER);
|
|
|
|
/* enable receiver */
|
|
wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
|
|
|
|
info->rx_restart = 0;
|
|
info->rx_enabled = 1;
|
|
}
|
|
|
|
static void tx_start(struct slgt_info *info)
|
|
{
|
|
if (!info->tx_enabled) {
|
|
wr_reg16(info, TCR,
|
|
(unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
|
|
info->tx_enabled = TRUE;
|
|
}
|
|
|
|
if (info->tx_count) {
|
|
info->drop_rts_on_tx_done = 0;
|
|
|
|
if (info->params.mode != MGSL_MODE_ASYNC) {
|
|
if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
|
|
get_signals(info);
|
|
if (!(info->signals & SerialSignal_RTS)) {
|
|
info->signals |= SerialSignal_RTS;
|
|
set_signals(info);
|
|
info->drop_rts_on_tx_done = 1;
|
|
}
|
|
}
|
|
|
|
slgt_irq_off(info, IRQ_TXDATA);
|
|
slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
|
|
/* clear tx idle and underrun status bits */
|
|
wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
|
|
if (info->params.mode == MGSL_MODE_HDLC)
|
|
mod_timer(&info->tx_timer, jiffies +
|
|
msecs_to_jiffies(5000));
|
|
} else {
|
|
slgt_irq_off(info, IRQ_TXDATA);
|
|
slgt_irq_on(info, IRQ_TXIDLE);
|
|
/* clear tx idle status bit */
|
|
wr_reg16(info, SSR, IRQ_TXIDLE);
|
|
}
|
|
tdma_start(info);
|
|
info->tx_active = 1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* start transmit DMA if inactive and there are unsent buffers
|
|
*/
|
|
static void tdma_start(struct slgt_info *info)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (rd_reg32(info, TDCSR) & BIT0)
|
|
return;
|
|
|
|
/* transmit DMA inactive, check for unsent buffers */
|
|
i = info->tbuf_start;
|
|
while (!desc_count(info->tbufs[i])) {
|
|
if (++i == info->tbuf_count)
|
|
i = 0;
|
|
if (i == info->tbuf_current)
|
|
return;
|
|
}
|
|
info->tbuf_start = i;
|
|
|
|
/* there are unsent buffers, start transmit DMA */
|
|
|
|
/* reset needed if previous error condition */
|
|
tdma_reset(info);
|
|
|
|
/* set 1st descriptor address */
|
|
wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
|
|
switch(info->params.mode) {
|
|
case MGSL_MODE_RAW:
|
|
case MGSL_MODE_MONOSYNC:
|
|
case MGSL_MODE_BISYNC:
|
|
wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */
|
|
break;
|
|
default:
|
|
wr_reg32(info, TDCSR, BIT0); /* DMA enable */
|
|
}
|
|
}
|
|
|
|
static void tx_stop(struct slgt_info *info)
|
|
{
|
|
unsigned short val;
|
|
|
|
del_timer(&info->tx_timer);
|
|
|
|
tdma_reset(info);
|
|
|
|
/* reset and disable transmitter */
|
|
val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
|
|
wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
|
|
|
|
slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
|
|
|
|
/* clear tx idle and underrun status bit */
|
|
wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
|
|
|
|
reset_tbufs(info);
|
|
|
|
info->tx_enabled = 0;
|
|
info->tx_active = 0;
|
|
}
|
|
|
|
static void reset_port(struct slgt_info *info)
|
|
{
|
|
if (!info->reg_addr)
|
|
return;
|
|
|
|
tx_stop(info);
|
|
rx_stop(info);
|
|
|
|
info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
|
|
set_signals(info);
|
|
|
|
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
|
|
}
|
|
|
|
static void reset_adapter(struct slgt_info *info)
|
|
{
|
|
int i;
|
|
for (i=0; i < info->port_count; ++i) {
|
|
if (info->port_array[i])
|
|
reset_port(info->port_array[i]);
|
|
}
|
|
}
|
|
|
|
static void async_mode(struct slgt_info *info)
|
|
{
|
|
unsigned short val;
|
|
|
|
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
|
|
tx_stop(info);
|
|
rx_stop(info);
|
|
|
|
/* TCR (tx control)
|
|
*
|
|
* 15..13 mode, 010=async
|
|
* 12..10 encoding, 000=NRZ
|
|
* 09 parity enable
|
|
* 08 1=odd parity, 0=even parity
|
|
* 07 1=RTS driver control
|
|
* 06 1=break enable
|
|
* 05..04 character length
|
|
* 00=5 bits
|
|
* 01=6 bits
|
|
* 10=7 bits
|
|
* 11=8 bits
|
|
* 03 0=1 stop bit, 1=2 stop bits
|
|
* 02 reset
|
|
* 01 enable
|
|
* 00 auto-CTS enable
|
|
*/
|
|
val = 0x4000;
|
|
|
|
if (info->if_mode & MGSL_INTERFACE_RTS_EN)
|
|
val |= BIT7;
|
|
|
|
if (info->params.parity != ASYNC_PARITY_NONE) {
|
|
val |= BIT9;
|
|
if (info->params.parity == ASYNC_PARITY_ODD)
|
|
val |= BIT8;
|
|
}
|
|
|
|
switch (info->params.data_bits)
|
|
{
|
|
case 6: val |= BIT4; break;
|
|
case 7: val |= BIT5; break;
|
|
case 8: val |= BIT5 + BIT4; break;
|
|
}
|
|
|
|
if (info->params.stop_bits != 1)
|
|
val |= BIT3;
|
|
|
|
if (info->params.flags & HDLC_FLAG_AUTO_CTS)
|
|
val |= BIT0;
|
|
|
|
wr_reg16(info, TCR, val);
|
|
|
|
/* RCR (rx control)
|
|
*
|
|
* 15..13 mode, 010=async
|
|
* 12..10 encoding, 000=NRZ
|
|
* 09 parity enable
|
|
* 08 1=odd parity, 0=even parity
|
|
* 07..06 reserved, must be 0
|
|
* 05..04 character length
|
|
* 00=5 bits
|
|
* 01=6 bits
|
|
* 10=7 bits
|
|
* 11=8 bits
|
|
* 03 reserved, must be zero
|
|
* 02 reset
|
|
* 01 enable
|
|
* 00 auto-DCD enable
|
|
*/
|
|
val = 0x4000;
|
|
|
|
if (info->params.parity != ASYNC_PARITY_NONE) {
|
|
val |= BIT9;
|
|
if (info->params.parity == ASYNC_PARITY_ODD)
|
|
val |= BIT8;
|
|
}
|
|
|
|
switch (info->params.data_bits)
|
|
{
|
|
case 6: val |= BIT4; break;
|
|
case 7: val |= BIT5; break;
|
|
case 8: val |= BIT5 + BIT4; break;
|
|
}
|
|
|
|
if (info->params.flags & HDLC_FLAG_AUTO_DCD)
|
|
val |= BIT0;
|
|
|
|
wr_reg16(info, RCR, val);
|
|
|
|
/* CCR (clock control)
|
|
*
|
|
* 07..05 011 = tx clock source is BRG/16
|
|
* 04..02 010 = rx clock source is BRG
|
|
* 01 0 = auxclk disabled
|
|
* 00 1 = BRG enabled
|
|
*
|
|
* 0110 1001
|
|
*/
|
|
wr_reg8(info, CCR, 0x69);
|
|
|
|
msc_set_vcr(info);
|
|
|
|
/* SCR (serial control)
|
|
*
|
|
* 15 1=tx req on FIFO half empty
|
|
* 14 1=rx req on FIFO half full
|
|
* 13 tx data IRQ enable
|
|
* 12 tx idle IRQ enable
|
|
* 11 rx break on IRQ enable
|
|
* 10 rx data IRQ enable
|
|
* 09 rx break off IRQ enable
|
|
* 08 overrun IRQ enable
|
|
* 07 DSR IRQ enable
|
|
* 06 CTS IRQ enable
|
|
* 05 DCD IRQ enable
|
|
* 04 RI IRQ enable
|
|
* 03 reserved, must be zero
|
|
* 02 1=txd->rxd internal loopback enable
|
|
* 01 reserved, must be zero
|
|
* 00 1=master IRQ enable
|
|
*/
|
|
val = BIT15 + BIT14 + BIT0;
|
|
wr_reg16(info, SCR, val);
|
|
|
|
slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
|
|
|
|
set_rate(info, info->params.data_rate * 16);
|
|
|
|
if (info->params.loopback)
|
|
enable_loopback(info);
|
|
}
|
|
|
|
static void sync_mode(struct slgt_info *info)
|
|
{
|
|
unsigned short val;
|
|
|
|
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
|
|
tx_stop(info);
|
|
rx_stop(info);
|
|
|
|
/* TCR (tx control)
|
|
*
|
|
* 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
|
|
* 12..10 encoding
|
|
* 09 CRC enable
|
|
* 08 CRC32
|
|
* 07 1=RTS driver control
|
|
* 06 preamble enable
|
|
* 05..04 preamble length
|
|
* 03 share open/close flag
|
|
* 02 reset
|
|
* 01 enable
|
|
* 00 auto-CTS enable
|
|
*/
|
|
val = 0;
|
|
|
|
switch(info->params.mode) {
|
|
case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
|
|
case MGSL_MODE_BISYNC: val |= BIT15; break;
|
|
case MGSL_MODE_RAW: val |= BIT13; break;
|
|
}
|
|
if (info->if_mode & MGSL_INTERFACE_RTS_EN)
|
|
val |= BIT7;
|
|
|
|
switch(info->params.encoding)
|
|
{
|
|
case HDLC_ENCODING_NRZB: val |= BIT10; break;
|
|
case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
|
|
case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
|
|
case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
|
|
case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
|
|
case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
|
|
case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
|
|
}
|
|
|
|
switch (info->params.crc_type & HDLC_CRC_MASK)
|
|
{
|
|
case HDLC_CRC_16_CCITT: val |= BIT9; break;
|
|
case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
|
|
}
|
|
|
|
if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
|
|
val |= BIT6;
|
|
|
|
switch (info->params.preamble_length)
|
|
{
|
|
case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
|
|
case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
|
|
case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
|
|
}
|
|
|
|
if (info->params.flags & HDLC_FLAG_AUTO_CTS)
|
|
val |= BIT0;
|
|
|
|
wr_reg16(info, TCR, val);
|
|
|
|
/* TPR (transmit preamble) */
|
|
|
|
switch (info->params.preamble)
|
|
{
|
|
case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
|
|
case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
|
|
case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
|
|
case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
|
|
case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
|
|
default: val = 0x7e; break;
|
|
}
|
|
wr_reg8(info, TPR, (unsigned char)val);
|
|
|
|
/* RCR (rx control)
|
|
*
|
|
* 15..13 mode, 000=HDLC 001=raw 010=async 011=monosync 100=bisync
|
|
* 12..10 encoding
|
|
* 09 CRC enable
|
|
* 08 CRC32
|
|
* 07..03 reserved, must be 0
|
|
* 02 reset
|
|
* 01 enable
|
|
* 00 auto-DCD enable
|
|
*/
|
|
val = 0;
|
|
|
|
switch(info->params.mode) {
|
|
case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
|
|
case MGSL_MODE_BISYNC: val |= BIT15; break;
|
|
case MGSL_MODE_RAW: val |= BIT13; break;
|
|
}
|
|
|
|
switch(info->params.encoding)
|
|
{
|
|
case HDLC_ENCODING_NRZB: val |= BIT10; break;
|
|
case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
|
|
case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
|
|
case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
|
|
case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
|
|
case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
|
|
case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
|
|
}
|
|
|
|
switch (info->params.crc_type & HDLC_CRC_MASK)
|
|
{
|
|
case HDLC_CRC_16_CCITT: val |= BIT9; break;
|
|
case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
|
|
}
|
|
|
|
if (info->params.flags & HDLC_FLAG_AUTO_DCD)
|
|
val |= BIT0;
|
|
|
|
wr_reg16(info, RCR, val);
|
|
|
|
/* CCR (clock control)
|
|
*
|
|
* 07..05 tx clock source
|
|
* 04..02 rx clock source
|
|
* 01 auxclk enable
|
|
* 00 BRG enable
|
|
*/
|
|
val = 0;
|
|
|
|
if (info->params.flags & HDLC_FLAG_TXC_BRG)
|
|
{
|
|
// when RxC source is DPLL, BRG generates 16X DPLL
|
|
// reference clock, so take TxC from BRG/16 to get
|
|
// transmit clock at actual data rate
|
|
if (info->params.flags & HDLC_FLAG_RXC_DPLL)
|
|
val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
|
|
else
|
|
val |= BIT6; /* 010, txclk = BRG */
|
|
}
|
|
else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
|
|
val |= BIT7; /* 100, txclk = DPLL Input */
|
|
else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
|
|
val |= BIT5; /* 001, txclk = RXC Input */
|
|
|
|
if (info->params.flags & HDLC_FLAG_RXC_BRG)
|
|
val |= BIT3; /* 010, rxclk = BRG */
|
|
else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
|
|
val |= BIT4; /* 100, rxclk = DPLL */
|
|
else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
|
|
val |= BIT2; /* 001, rxclk = TXC Input */
|
|
|
|
if (info->params.clock_speed)
|
|
val |= BIT1 + BIT0;
|
|
|
|
wr_reg8(info, CCR, (unsigned char)val);
|
|
|
|
if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
|
|
{
|
|
// program DPLL mode
|
|
switch(info->params.encoding)
|
|
{
|
|
case HDLC_ENCODING_BIPHASE_MARK:
|
|
case HDLC_ENCODING_BIPHASE_SPACE:
|
|
val = BIT7; break;
|
|
case HDLC_ENCODING_BIPHASE_LEVEL:
|
|
case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
|
|
val = BIT7 + BIT6; break;
|
|
default: val = BIT6; // NRZ encodings
|
|
}
|
|
wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
|
|
|
|
// DPLL requires a 16X reference clock from BRG
|
|
set_rate(info, info->params.clock_speed * 16);
|
|
}
|
|
else
|
|
set_rate(info, info->params.clock_speed);
|
|
|
|
tx_set_idle(info);
|
|
|
|
msc_set_vcr(info);
|
|
|
|
/* SCR (serial control)
|
|
*
|
|
* 15 1=tx req on FIFO half empty
|
|
* 14 1=rx req on FIFO half full
|
|
* 13 tx data IRQ enable
|
|
* 12 tx idle IRQ enable
|
|
* 11 underrun IRQ enable
|
|
* 10 rx data IRQ enable
|
|
* 09 rx idle IRQ enable
|
|
* 08 overrun IRQ enable
|
|
* 07 DSR IRQ enable
|
|
* 06 CTS IRQ enable
|
|
* 05 DCD IRQ enable
|
|
* 04 RI IRQ enable
|
|
* 03 reserved, must be zero
|
|
* 02 1=txd->rxd internal loopback enable
|
|
* 01 reserved, must be zero
|
|
* 00 1=master IRQ enable
|
|
*/
|
|
wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
|
|
|
|
if (info->params.loopback)
|
|
enable_loopback(info);
|
|
}
|
|
|
|
/*
|
|
* set transmit idle mode
|
|
*/
|
|
static void tx_set_idle(struct slgt_info *info)
|
|
{
|
|
unsigned char val;
|
|
unsigned short tcr;
|
|
|
|
/* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
|
|
* else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
|
|
*/
|
|
tcr = rd_reg16(info, TCR);
|
|
if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
|
|
/* disable preamble, set idle size to 16 bits */
|
|
tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
|
|
/* MSB of 16 bit idle specified in tx preamble register (TPR) */
|
|
wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
|
|
} else if (!(tcr & BIT6)) {
|
|
/* preamble is disabled, set idle size to 8 bits */
|
|
tcr &= ~(BIT5 + BIT4);
|
|
}
|
|
wr_reg16(info, TCR, tcr);
|
|
|
|
if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
|
|
/* LSB of custom tx idle specified in tx idle register */
|
|
val = (unsigned char)(info->idle_mode & 0xff);
|
|
} else {
|
|
/* standard 8 bit idle patterns */
|
|
switch(info->idle_mode)
|
|
{
|
|
case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
|
|
case HDLC_TXIDLE_ALT_ZEROS_ONES:
|
|
case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
|
|
case HDLC_TXIDLE_ZEROS:
|
|
case HDLC_TXIDLE_SPACE: val = 0x00; break;
|
|
default: val = 0xff;
|
|
}
|
|
}
|
|
|
|
wr_reg8(info, TIR, val);
|
|
}
|
|
|
|
/*
|
|
* get state of V24 status (input) signals
|
|
*/
|
|
static void get_signals(struct slgt_info *info)
|
|
{
|
|
unsigned short status = rd_reg16(info, SSR);
|
|
|
|
/* clear all serial signals except DTR and RTS */
|
|
info->signals &= SerialSignal_DTR + SerialSignal_RTS;
|
|
|
|
if (status & BIT3)
|
|
info->signals |= SerialSignal_DSR;
|
|
if (status & BIT2)
|
|
info->signals |= SerialSignal_CTS;
|
|
if (status & BIT1)
|
|
info->signals |= SerialSignal_DCD;
|
|
if (status & BIT0)
|
|
info->signals |= SerialSignal_RI;
|
|
}
|
|
|
|
/*
|
|
* set V.24 Control Register based on current configuration
|
|
*/
|
|
static void msc_set_vcr(struct slgt_info *info)
|
|
{
|
|
unsigned char val = 0;
|
|
|
|
/* VCR (V.24 control)
|
|
*
|
|
* 07..04 serial IF select
|
|
* 03 DTR
|
|
* 02 RTS
|
|
* 01 LL
|
|
* 00 RL
|
|
*/
|
|
|
|
switch(info->if_mode & MGSL_INTERFACE_MASK)
|
|
{
|
|
case MGSL_INTERFACE_RS232:
|
|
val |= BIT5; /* 0010 */
|
|
break;
|
|
case MGSL_INTERFACE_V35:
|
|
val |= BIT7 + BIT6 + BIT5; /* 1110 */
|
|
break;
|
|
case MGSL_INTERFACE_RS422:
|
|
val |= BIT6; /* 0100 */
|
|
break;
|
|
}
|
|
|
|
if (info->signals & SerialSignal_DTR)
|
|
val |= BIT3;
|
|
if (info->signals & SerialSignal_RTS)
|
|
val |= BIT2;
|
|
if (info->if_mode & MGSL_INTERFACE_LL)
|
|
val |= BIT1;
|
|
if (info->if_mode & MGSL_INTERFACE_RL)
|
|
val |= BIT0;
|
|
wr_reg8(info, VCR, val);
|
|
}
|
|
|
|
/*
|
|
* set state of V24 control (output) signals
|
|
*/
|
|
static void set_signals(struct slgt_info *info)
|
|
{
|
|
unsigned char val = rd_reg8(info, VCR);
|
|
if (info->signals & SerialSignal_DTR)
|
|
val |= BIT3;
|
|
else
|
|
val &= ~BIT3;
|
|
if (info->signals & SerialSignal_RTS)
|
|
val |= BIT2;
|
|
else
|
|
val &= ~BIT2;
|
|
wr_reg8(info, VCR, val);
|
|
}
|
|
|
|
/*
|
|
* free range of receive DMA buffers (i to last)
|
|
*/
|
|
static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
|
|
{
|
|
int done = 0;
|
|
|
|
while(!done) {
|
|
/* reset current buffer for reuse */
|
|
info->rbufs[i].status = 0;
|
|
switch(info->params.mode) {
|
|
case MGSL_MODE_RAW:
|
|
case MGSL_MODE_MONOSYNC:
|
|
case MGSL_MODE_BISYNC:
|
|
set_desc_count(info->rbufs[i], info->raw_rx_size);
|
|
break;
|
|
default:
|
|
set_desc_count(info->rbufs[i], DMABUFSIZE);
|
|
}
|
|
|
|
if (i == last)
|
|
done = 1;
|
|
if (++i == info->rbuf_count)
|
|
i = 0;
|
|
}
|
|
info->rbuf_current = i;
|
|
}
|
|
|
|
/*
|
|
* mark all receive DMA buffers as free
|
|
*/
|
|
static void reset_rbufs(struct slgt_info *info)
|
|
{
|
|
free_rbufs(info, 0, info->rbuf_count - 1);
|
|
}
|
|
|
|
/*
|
|
* pass receive HDLC frame to upper layer
|
|
*
|
|
* return 1 if frame available, otherwise 0
|
|
*/
|
|
static int rx_get_frame(struct slgt_info *info)
|
|
{
|
|
unsigned int start, end;
|
|
unsigned short status;
|
|
unsigned int framesize = 0;
|
|
int rc = 0;
|
|
unsigned long flags;
|
|
struct tty_struct *tty = info->tty;
|
|
unsigned char addr_field = 0xff;
|
|
unsigned int crc_size = 0;
|
|
|
|
switch (info->params.crc_type & HDLC_CRC_MASK) {
|
|
case HDLC_CRC_16_CCITT: crc_size = 2; break;
|
|
case HDLC_CRC_32_CCITT: crc_size = 4; break;
|
|
}
|
|
|
|
check_again:
|
|
|
|
framesize = 0;
|
|
addr_field = 0xff;
|
|
start = end = info->rbuf_current;
|
|
|
|
for (;;) {
|
|
if (!desc_complete(info->rbufs[end]))
|
|
goto cleanup;
|
|
|
|
if (framesize == 0 && info->params.addr_filter != 0xff)
|
|
addr_field = info->rbufs[end].buf[0];
|
|
|
|
framesize += desc_count(info->rbufs[end]);
|
|
|
|
if (desc_eof(info->rbufs[end]))
|
|
break;
|
|
|
|
if (++end == info->rbuf_count)
|
|
end = 0;
|
|
|
|
if (end == info->rbuf_current) {
|
|
if (info->rx_enabled){
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
rx_start(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
}
|
|
goto cleanup;
|
|
}
|
|
}
|
|
|
|
/* status
|
|
*
|
|
* 15 buffer complete
|
|
* 14..06 reserved
|
|
* 05..04 residue
|
|
* 02 eof (end of frame)
|
|
* 01 CRC error
|
|
* 00 abort
|
|
*/
|
|
status = desc_status(info->rbufs[end]);
|
|
|
|
/* ignore CRC bit if not using CRC (bit is undefined) */
|
|
if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
|
|
status &= ~BIT1;
|
|
|
|
if (framesize == 0 ||
|
|
(addr_field != 0xff && addr_field != info->params.addr_filter)) {
|
|
free_rbufs(info, start, end);
|
|
goto check_again;
|
|
}
|
|
|
|
if (framesize < (2 + crc_size) || status & BIT0) {
|
|
info->icount.rxshort++;
|
|
framesize = 0;
|
|
} else if (status & BIT1) {
|
|
info->icount.rxcrc++;
|
|
if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
|
|
framesize = 0;
|
|
}
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (framesize == 0) {
|
|
struct net_device_stats *stats = hdlc_stats(info->netdev);
|
|
stats->rx_errors++;
|
|
stats->rx_frame_errors++;
|
|
}
|
|
#endif
|
|
|
|
DBGBH(("%s rx frame status=%04X size=%d\n",
|
|
info->device_name, status, framesize));
|
|
DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx");
|
|
|
|
if (framesize) {
|
|
if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
|
|
framesize -= crc_size;
|
|
crc_size = 0;
|
|
}
|
|
|
|
if (framesize > info->max_frame_size + crc_size)
|
|
info->icount.rxlong++;
|
|
else {
|
|
/* copy dma buffer(s) to contiguous temp buffer */
|
|
int copy_count = framesize;
|
|
int i = start;
|
|
unsigned char *p = info->tmp_rbuf;
|
|
info->tmp_rbuf_count = framesize;
|
|
|
|
info->icount.rxok++;
|
|
|
|
while(copy_count) {
|
|
int partial_count = min(copy_count, DMABUFSIZE);
|
|
memcpy(p, info->rbufs[i].buf, partial_count);
|
|
p += partial_count;
|
|
copy_count -= partial_count;
|
|
if (++i == info->rbuf_count)
|
|
i = 0;
|
|
}
|
|
|
|
if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
|
|
*p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
|
|
framesize++;
|
|
}
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (info->netcount)
|
|
hdlcdev_rx(info,info->tmp_rbuf, framesize);
|
|
else
|
|
#endif
|
|
ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
|
|
}
|
|
}
|
|
free_rbufs(info, start, end);
|
|
rc = 1;
|
|
|
|
cleanup:
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* pass receive buffer (RAW synchronous mode) to tty layer
|
|
* return 1 if buffer available, otherwise 0
|
|
*/
|
|
static int rx_get_buf(struct slgt_info *info)
|
|
{
|
|
unsigned int i = info->rbuf_current;
|
|
unsigned int count;
|
|
|
|
if (!desc_complete(info->rbufs[i]))
|
|
return 0;
|
|
count = desc_count(info->rbufs[i]);
|
|
switch(info->params.mode) {
|
|
case MGSL_MODE_MONOSYNC:
|
|
case MGSL_MODE_BISYNC:
|
|
/* ignore residue in byte synchronous modes */
|
|
if (desc_residue(info->rbufs[i]))
|
|
count--;
|
|
break;
|
|
}
|
|
DBGDATA(info, info->rbufs[i].buf, count, "rx");
|
|
DBGINFO(("rx_get_buf size=%d\n", count));
|
|
if (count)
|
|
ldisc_receive_buf(info->tty, info->rbufs[i].buf,
|
|
info->flag_buf, count);
|
|
free_rbufs(info, i, i);
|
|
return 1;
|
|
}
|
|
|
|
static void reset_tbufs(struct slgt_info *info)
|
|
{
|
|
unsigned int i;
|
|
info->tbuf_current = 0;
|
|
for (i=0 ; i < info->tbuf_count ; i++) {
|
|
info->tbufs[i].status = 0;
|
|
info->tbufs[i].count = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* return number of free transmit DMA buffers
|
|
*/
|
|
static unsigned int free_tbuf_count(struct slgt_info *info)
|
|
{
|
|
unsigned int count = 0;
|
|
unsigned int i = info->tbuf_current;
|
|
|
|
do
|
|
{
|
|
if (desc_count(info->tbufs[i]))
|
|
break; /* buffer in use */
|
|
++count;
|
|
if (++i == info->tbuf_count)
|
|
i=0;
|
|
} while (i != info->tbuf_current);
|
|
|
|
/* if tx DMA active, last zero count buffer is in use */
|
|
if (count && (rd_reg32(info, TDCSR) & BIT0))
|
|
--count;
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* load transmit DMA buffer(s) with data
|
|
*/
|
|
static void tx_load(struct slgt_info *info, const char *buf, unsigned int size)
|
|
{
|
|
unsigned short count;
|
|
unsigned int i;
|
|
struct slgt_desc *d;
|
|
|
|
if (size == 0)
|
|
return;
|
|
|
|
DBGDATA(info, buf, size, "tx");
|
|
|
|
info->tbuf_start = i = info->tbuf_current;
|
|
|
|
while (size) {
|
|
d = &info->tbufs[i];
|
|
if (++i == info->tbuf_count)
|
|
i = 0;
|
|
|
|
count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
|
|
memcpy(d->buf, buf, count);
|
|
|
|
size -= count;
|
|
buf += count;
|
|
|
|
/*
|
|
* set EOF bit for last buffer of HDLC frame or
|
|
* for every buffer in raw mode
|
|
*/
|
|
if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
|
|
info->params.mode == MGSL_MODE_RAW)
|
|
set_desc_eof(*d, 1);
|
|
else
|
|
set_desc_eof(*d, 0);
|
|
|
|
set_desc_count(*d, count);
|
|
}
|
|
|
|
info->tbuf_current = i;
|
|
}
|
|
|
|
static int register_test(struct slgt_info *info)
|
|
{
|
|
static unsigned short patterns[] =
|
|
{0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
|
|
static unsigned int count = sizeof(patterns)/sizeof(patterns[0]);
|
|
unsigned int i;
|
|
int rc = 0;
|
|
|
|
for (i=0 ; i < count ; i++) {
|
|
wr_reg16(info, TIR, patterns[i]);
|
|
wr_reg16(info, BDR, patterns[(i+1)%count]);
|
|
if ((rd_reg16(info, TIR) != patterns[i]) ||
|
|
(rd_reg16(info, BDR) != patterns[(i+1)%count])) {
|
|
rc = -ENODEV;
|
|
break;
|
|
}
|
|
}
|
|
info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
|
|
info->init_error = rc ? 0 : DiagStatus_AddressFailure;
|
|
return rc;
|
|
}
|
|
|
|
static int irq_test(struct slgt_info *info)
|
|
{
|
|
unsigned long timeout;
|
|
unsigned long flags;
|
|
struct tty_struct *oldtty = info->tty;
|
|
u32 speed = info->params.data_rate;
|
|
|
|
info->params.data_rate = 921600;
|
|
info->tty = NULL;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
async_mode(info);
|
|
slgt_irq_on(info, IRQ_TXIDLE);
|
|
|
|
/* enable transmitter */
|
|
wr_reg16(info, TCR,
|
|
(unsigned short)(rd_reg16(info, TCR) | BIT1));
|
|
|
|
/* write one byte and wait for tx idle */
|
|
wr_reg16(info, TDR, 0);
|
|
|
|
/* assume failure */
|
|
info->init_error = DiagStatus_IrqFailure;
|
|
info->irq_occurred = FALSE;
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
timeout=100;
|
|
while(timeout-- && !info->irq_occurred)
|
|
msleep_interruptible(10);
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
reset_port(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
info->params.data_rate = speed;
|
|
info->tty = oldtty;
|
|
|
|
info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
|
|
return info->irq_occurred ? 0 : -ENODEV;
|
|
}
|
|
|
|
static int loopback_test_rx(struct slgt_info *info)
|
|
{
|
|
unsigned char *src, *dest;
|
|
int count;
|
|
|
|
if (desc_complete(info->rbufs[0])) {
|
|
count = desc_count(info->rbufs[0]);
|
|
src = info->rbufs[0].buf;
|
|
dest = info->tmp_rbuf;
|
|
|
|
for( ; count ; count-=2, src+=2) {
|
|
/* src=data byte (src+1)=status byte */
|
|
if (!(*(src+1) & (BIT9 + BIT8))) {
|
|
*dest = *src;
|
|
dest++;
|
|
info->tmp_rbuf_count++;
|
|
}
|
|
}
|
|
DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int loopback_test(struct slgt_info *info)
|
|
{
|
|
#define TESTFRAMESIZE 20
|
|
|
|
unsigned long timeout;
|
|
u16 count = TESTFRAMESIZE;
|
|
unsigned char buf[TESTFRAMESIZE];
|
|
int rc = -ENODEV;
|
|
unsigned long flags;
|
|
|
|
struct tty_struct *oldtty = info->tty;
|
|
MGSL_PARAMS params;
|
|
|
|
memcpy(¶ms, &info->params, sizeof(params));
|
|
|
|
info->params.mode = MGSL_MODE_ASYNC;
|
|
info->params.data_rate = 921600;
|
|
info->params.loopback = 1;
|
|
info->tty = NULL;
|
|
|
|
/* build and send transmit frame */
|
|
for (count = 0; count < TESTFRAMESIZE; ++count)
|
|
buf[count] = (unsigned char)count;
|
|
|
|
info->tmp_rbuf_count = 0;
|
|
memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
|
|
|
|
/* program hardware for HDLC and enabled receiver */
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
async_mode(info);
|
|
rx_start(info);
|
|
info->tx_count = count;
|
|
tx_load(info, buf, count);
|
|
tx_start(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
/* wait for receive complete */
|
|
for (timeout = 100; timeout; --timeout) {
|
|
msleep_interruptible(10);
|
|
if (loopback_test_rx(info)) {
|
|
rc = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* verify received frame length and contents */
|
|
if (!rc && (info->tmp_rbuf_count != count ||
|
|
memcmp(buf, info->tmp_rbuf, count))) {
|
|
rc = -ENODEV;
|
|
}
|
|
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
reset_adapter(info);
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
memcpy(&info->params, ¶ms, sizeof(info->params));
|
|
info->tty = oldtty;
|
|
|
|
info->init_error = rc ? DiagStatus_DmaFailure : 0;
|
|
return rc;
|
|
}
|
|
|
|
static int adapter_test(struct slgt_info *info)
|
|
{
|
|
DBGINFO(("testing %s\n", info->device_name));
|
|
if (register_test(info) < 0) {
|
|
printk("register test failure %s addr=%08X\n",
|
|
info->device_name, info->phys_reg_addr);
|
|
} else if (irq_test(info) < 0) {
|
|
printk("IRQ test failure %s IRQ=%d\n",
|
|
info->device_name, info->irq_level);
|
|
} else if (loopback_test(info) < 0) {
|
|
printk("loopback test failure %s\n", info->device_name);
|
|
}
|
|
return info->init_error;
|
|
}
|
|
|
|
/*
|
|
* transmit timeout handler
|
|
*/
|
|
static void tx_timeout(unsigned long context)
|
|
{
|
|
struct slgt_info *info = (struct slgt_info*)context;
|
|
unsigned long flags;
|
|
|
|
DBGINFO(("%s tx_timeout\n", info->device_name));
|
|
if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
|
|
info->icount.txtimeout++;
|
|
}
|
|
spin_lock_irqsave(&info->lock,flags);
|
|
info->tx_active = 0;
|
|
info->tx_count = 0;
|
|
spin_unlock_irqrestore(&info->lock,flags);
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (info->netcount)
|
|
hdlcdev_tx_done(info);
|
|
else
|
|
#endif
|
|
bh_transmit(info);
|
|
}
|
|
|
|
/*
|
|
* receive buffer polling timer
|
|
*/
|
|
static void rx_timeout(unsigned long context)
|
|
{
|
|
struct slgt_info *info = (struct slgt_info*)context;
|
|
unsigned long flags;
|
|
|
|
DBGINFO(("%s rx_timeout\n", info->device_name));
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
info->pending_bh |= BH_RECEIVE;
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
bh_handler(&info->task);
|
|
}
|
|
|