mirror of
https://github.com/adulau/aha.git
synced 2024-12-29 12:16:20 +00:00
305282ba19
The future atl2 driver and the existing atl1 driver can share certain functions and definitions. Move these shareable functions and definitions out of atl1-specific files and into atlx.c and atlx.h. Some transitory hackery will be present until atl2 is merged. Reduce the number of source files by moving ethtool, hw, and param functions from separate files into atl1_main.c, then rename it to just atl1.c. Move all atl1-specific definitions from atl1_hw.h to atl1.h. Finally, clean up to make checkpatch.pl happy. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
506 lines
18 KiB
C
506 lines
18 KiB
C
/* atlx_hw.h -- common hardware definitions for Attansic network drivers
|
|
*
|
|
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
|
|
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
|
|
* Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
|
|
* Copyright(c) 2007 Atheros Corporation. All rights reserved.
|
|
*
|
|
* Derived from Intel e1000 driver
|
|
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc., 59
|
|
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#ifndef ATLX_H
|
|
#define ATLX_H
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
|
|
#define ATLX_DRIVER_VERSION "2.1.1"
|
|
MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
|
|
Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(ATLX_DRIVER_VERSION);
|
|
|
|
#define ATLX_ERR_PHY 2
|
|
#define ATLX_ERR_PHY_SPEED 7
|
|
#define ATLX_ERR_PHY_RES 8
|
|
|
|
#define SPEED_0 0xffff
|
|
#define SPEED_10 10
|
|
#define SPEED_100 100
|
|
#define SPEED_1000 1000
|
|
#define HALF_DUPLEX 1
|
|
#define FULL_DUPLEX 2
|
|
|
|
#define MEDIA_TYPE_AUTO_SENSOR 0
|
|
|
|
/* register definitions */
|
|
#define REG_PM_CTRLSTAT 0x44
|
|
|
|
#define REG_PCIE_CAP_LIST 0x58
|
|
|
|
#define REG_VPD_CAP 0x6C
|
|
#define VPD_CAP_ID_MASK 0xFF
|
|
#define VPD_CAP_ID_SHIFT 0
|
|
#define VPD_CAP_NEXT_PTR_MASK 0xFF
|
|
#define VPD_CAP_NEXT_PTR_SHIFT 8
|
|
#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
|
|
#define VPD_CAP_VPD_ADDR_SHIFT 16
|
|
#define VPD_CAP_VPD_FLAG 0x80000000
|
|
|
|
#define REG_VPD_DATA 0x70
|
|
|
|
#define REG_SPI_FLASH_CTRL 0x200
|
|
#define SPI_FLASH_CTRL_STS_NON_RDY 0x1
|
|
#define SPI_FLASH_CTRL_STS_WEN 0x2
|
|
#define SPI_FLASH_CTRL_STS_WPEN 0x80
|
|
#define SPI_FLASH_CTRL_DEV_STS_MASK 0xFF
|
|
#define SPI_FLASH_CTRL_DEV_STS_SHIFT 0
|
|
#define SPI_FLASH_CTRL_INS_MASK 0x7
|
|
#define SPI_FLASH_CTRL_INS_SHIFT 8
|
|
#define SPI_FLASH_CTRL_START 0x800
|
|
#define SPI_FLASH_CTRL_EN_VPD 0x2000
|
|
#define SPI_FLASH_CTRL_LDSTART 0x8000
|
|
#define SPI_FLASH_CTRL_CS_HI_MASK 0x3
|
|
#define SPI_FLASH_CTRL_CS_HI_SHIFT 16
|
|
#define SPI_FLASH_CTRL_CS_HOLD_MASK 0x3
|
|
#define SPI_FLASH_CTRL_CS_HOLD_SHIFT 18
|
|
#define SPI_FLASH_CTRL_CLK_LO_MASK 0x3
|
|
#define SPI_FLASH_CTRL_CLK_LO_SHIFT 20
|
|
#define SPI_FLASH_CTRL_CLK_HI_MASK 0x3
|
|
#define SPI_FLASH_CTRL_CLK_HI_SHIFT 22
|
|
#define SPI_FLASH_CTRL_CS_SETUP_MASK 0x3
|
|
#define SPI_FLASH_CTRL_CS_SETUP_SHIFT 24
|
|
#define SPI_FLASH_CTRL_EROM_PGSZ_MASK 0x3
|
|
#define SPI_FLASH_CTRL_EROM_PGSZ_SHIFT 26
|
|
#define SPI_FLASH_CTRL_WAIT_READY 0x10000000
|
|
|
|
#define REG_SPI_ADDR 0x204
|
|
|
|
#define REG_SPI_DATA 0x208
|
|
|
|
#define REG_SPI_FLASH_CONFIG 0x20C
|
|
#define SPI_FLASH_CONFIG_LD_ADDR_MASK 0xFFFFFF
|
|
#define SPI_FLASH_CONFIG_LD_ADDR_SHIFT 0
|
|
#define SPI_FLASH_CONFIG_VPD_ADDR_MASK 0x3
|
|
#define SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
|
|
#define SPI_FLASH_CONFIG_LD_EXIST 0x4000000
|
|
|
|
#define REG_SPI_FLASH_OP_PROGRAM 0x210
|
|
#define REG_SPI_FLASH_OP_SC_ERASE 0x211
|
|
#define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
|
|
#define REG_SPI_FLASH_OP_RDID 0x213
|
|
#define REG_SPI_FLASH_OP_WREN 0x214
|
|
#define REG_SPI_FLASH_OP_RDSR 0x215
|
|
#define REG_SPI_FLASH_OP_WRSR 0x216
|
|
#define REG_SPI_FLASH_OP_READ 0x217
|
|
|
|
#define REG_TWSI_CTRL 0x218
|
|
#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
|
|
#define TWSI_CTRL_LD_OFFSET_SHIFT 0
|
|
#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
|
|
#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
|
|
#define TWSI_CTRL_SW_LDSTART 0x800
|
|
#define TWSI_CTRL_HW_LDSTART 0x1000
|
|
#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
|
|
#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
|
|
#define TWSI_CTRL_LD_EXIST 0x400000
|
|
#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
|
|
#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
|
|
#define TWSI_CTRL_FREQ_SEL_100K 0
|
|
#define TWSI_CTRL_FREQ_SEL_200K 1
|
|
#define TWSI_CTRL_FREQ_SEL_300K 2
|
|
#define TWSI_CTRL_FREQ_SEL_400K 3
|
|
#define TWSI_CTRL_SMB_SLV_ADDR /* FIXME: define or remove */
|
|
#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
|
|
#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
|
|
|
|
#define REG_PCIE_DEV_MISC_CTRL 0x21C
|
|
#define PCIE_DEV_MISC_CTRL_EXT_PIPE 0x2
|
|
#define PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
|
|
#define PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
|
|
#define PCIE_DEV_MISC_CTRL_SERDES_ENDIAN 0x8
|
|
#define PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN 0x10
|
|
|
|
#define REG_PCIE_PHYMISC 0x1000
|
|
#define PCIE_PHYMISC_FORCE_RCV_DET 0x4
|
|
|
|
#define REG_PCIE_DLL_TX_CTRL1 0x1104
|
|
#define PCIE_DLL_TX_CTRL1_SEL_NOR_CLK 0x400
|
|
#define PCIE_DLL_TX_CTRL1_DEF 0x568
|
|
|
|
#define REG_LTSSM_TEST_MODE 0x12FC
|
|
#define LTSSM_TEST_MODE_DEF 0x6500
|
|
|
|
/* Master Control Register */
|
|
#define REG_MASTER_CTRL 0x1400
|
|
#define MASTER_CTRL_SOFT_RST 0x1
|
|
#define MASTER_CTRL_MTIMER_EN 0x2
|
|
#define MASTER_CTRL_ITIMER_EN 0x4
|
|
#define MASTER_CTRL_MANUAL_INT 0x8
|
|
#define MASTER_CTRL_REV_NUM_SHIFT 16
|
|
#define MASTER_CTRL_REV_NUM_MASK 0xFF
|
|
#define MASTER_CTRL_DEV_ID_SHIFT 24
|
|
#define MASTER_CTRL_DEV_ID_MASK 0xFF
|
|
|
|
/* Timer Initial Value Register */
|
|
#define REG_MANUAL_TIMER_INIT 0x1404
|
|
|
|
/* IRQ Moderator Timer Initial Value Register */
|
|
#define REG_IRQ_MODU_TIMER_INIT 0x1408
|
|
|
|
#define REG_PHY_ENABLE 0x140C
|
|
|
|
/* IRQ Anti-Lost Timer Initial Value Register */
|
|
#define REG_CMBDISDMA_TIMER 0x140E
|
|
|
|
/* Block IDLE Status Register */
|
|
#define REG_IDLE_STATUS 0x1410
|
|
|
|
/* MDIO Control Register */
|
|
#define REG_MDIO_CTRL 0x1414
|
|
#define MDIO_DATA_MASK 0xFFFF
|
|
#define MDIO_DATA_SHIFT 0
|
|
#define MDIO_REG_ADDR_MASK 0x1F
|
|
#define MDIO_REG_ADDR_SHIFT 16
|
|
#define MDIO_RW 0x200000
|
|
#define MDIO_SUP_PREAMBLE 0x400000
|
|
#define MDIO_START 0x800000
|
|
#define MDIO_CLK_SEL_SHIFT 24
|
|
#define MDIO_CLK_25_4 0
|
|
#define MDIO_CLK_25_6 2
|
|
#define MDIO_CLK_25_8 3
|
|
#define MDIO_CLK_25_10 4
|
|
#define MDIO_CLK_25_14 5
|
|
#define MDIO_CLK_25_20 6
|
|
#define MDIO_CLK_25_28 7
|
|
#define MDIO_BUSY 0x8000000
|
|
|
|
/* MII PHY Status Register */
|
|
#define REG_PHY_STATUS 0x1418
|
|
|
|
/* BIST Control and Status Register0 (for the Packet Memory) */
|
|
#define REG_BIST0_CTRL 0x141C
|
|
#define BIST0_NOW 0x1
|
|
#define BIST0_SRAM_FAIL 0x2
|
|
#define BIST0_FUSE_FLAG 0x4
|
|
#define REG_BIST1_CTRL 0x1420
|
|
#define BIST1_NOW 0x1
|
|
#define BIST1_SRAM_FAIL 0x2
|
|
#define BIST1_FUSE_FLAG 0x4
|
|
|
|
/* SerDes Lock Detect Control and Status Register */
|
|
#define REG_SERDES_LOCK 0x1424
|
|
#define SERDES_LOCK_DETECT 1
|
|
#define SERDES_LOCK_DETECT_EN 2
|
|
|
|
/* MAC Control Register */
|
|
#define REG_MAC_CTRL 0x1480
|
|
#define MAC_CTRL_TX_EN 1
|
|
#define MAC_CTRL_RX_EN 2
|
|
#define MAC_CTRL_TX_FLOW 4
|
|
#define MAC_CTRL_RX_FLOW 8
|
|
#define MAC_CTRL_LOOPBACK 0x10
|
|
#define MAC_CTRL_DUPLX 0x20
|
|
#define MAC_CTRL_ADD_CRC 0x40
|
|
#define MAC_CTRL_PAD 0x80
|
|
#define MAC_CTRL_LENCHK 0x100
|
|
#define MAC_CTRL_HUGE_EN 0x200
|
|
#define MAC_CTRL_PRMLEN_SHIFT 10
|
|
#define MAC_CTRL_PRMLEN_MASK 0xF
|
|
#define MAC_CTRL_RMV_VLAN 0x4000
|
|
#define MAC_CTRL_PROMIS_EN 0x8000
|
|
#define MAC_CTRL_MC_ALL_EN 0x2000000
|
|
#define MAC_CTRL_BC_EN 0x4000000
|
|
|
|
/* MAC IPG/IFG Control Register */
|
|
#define REG_MAC_IPG_IFG 0x1484
|
|
#define MAC_IPG_IFG_IPGT_SHIFT 0
|
|
#define MAC_IPG_IFG_IPGT_MASK 0x7F
|
|
#define MAC_IPG_IFG_MIFG_SHIFT 8
|
|
#define MAC_IPG_IFG_MIFG_MASK 0xFF
|
|
#define MAC_IPG_IFG_IPGR1_SHIFT 16
|
|
#define MAC_IPG_IFG_IPGR1_MASK 0x7F
|
|
#define MAC_IPG_IFG_IPGR2_SHIFT 24
|
|
#define MAC_IPG_IFG_IPGR2_MASK 0x7F
|
|
|
|
/* MAC STATION ADDRESS */
|
|
#define REG_MAC_STA_ADDR 0x1488
|
|
|
|
/* Hash table for multicast address */
|
|
#define REG_RX_HASH_TABLE 0x1490
|
|
|
|
/* MAC Half-Duplex Control Register */
|
|
#define REG_MAC_HALF_DUPLX_CTRL 0x1498
|
|
#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0
|
|
#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3FF
|
|
#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
|
|
#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xF
|
|
#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000
|
|
#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000
|
|
#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000
|
|
#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000
|
|
#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20
|
|
#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xF
|
|
#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24
|
|
#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xF
|
|
|
|
/* Maximum Frame Length Control Register */
|
|
#define REG_MTU 0x149C
|
|
|
|
/* Wake-On-Lan control register */
|
|
#define REG_WOL_CTRL 0x14A0
|
|
#define WOL_PATTERN_EN 0x1
|
|
#define WOL_PATTERN_PME_EN 0x2
|
|
#define WOL_MAGIC_EN 0x4
|
|
#define WOL_MAGIC_PME_EN 0x8
|
|
#define WOL_LINK_CHG_EN 0x10
|
|
#define WOL_LINK_CHG_PME_EN 0x20
|
|
#define WOL_PATTERN_ST 0x100
|
|
#define WOL_MAGIC_ST 0x200
|
|
#define WOL_LINKCHG_ST 0x400
|
|
#define WOL_PT0_EN 0x10000
|
|
#define WOL_PT1_EN 0x20000
|
|
#define WOL_PT2_EN 0x40000
|
|
#define WOL_PT3_EN 0x80000
|
|
#define WOL_PT4_EN 0x100000
|
|
#define WOL_PT0_MATCH 0x1000000
|
|
#define WOL_PT1_MATCH 0x2000000
|
|
#define WOL_PT2_MATCH 0x4000000
|
|
#define WOL_PT3_MATCH 0x8000000
|
|
#define WOL_PT4_MATCH 0x10000000
|
|
|
|
/* Internal SRAM Partition Register, high 32 bits */
|
|
#define REG_SRAM_RFD_ADDR 0x1500
|
|
|
|
/* Descriptor Control register, high 32 bits */
|
|
#define REG_DESC_BASE_ADDR_HI 0x1540
|
|
|
|
/* Interrupt Status Register */
|
|
#define REG_ISR 0x1600
|
|
#define ISR_UR_DETECTED 0x1000000
|
|
#define ISR_FERR_DETECTED 0x2000000
|
|
#define ISR_NFERR_DETECTED 0x4000000
|
|
#define ISR_CERR_DETECTED 0x8000000
|
|
#define ISR_PHY_LINKDOWN 0x10000000
|
|
#define ISR_DIS_INT 0x80000000
|
|
|
|
/* Interrupt Mask Register */
|
|
#define REG_IMR 0x1604
|
|
|
|
#define REG_RFD_RRD_IDX 0x1800
|
|
#define REG_TPD_IDX 0x1804
|
|
|
|
/* MII definitions */
|
|
|
|
/* PHY Common Register */
|
|
#define MII_ATLX_CR 0x09
|
|
#define MII_ATLX_SR 0x0A
|
|
#define MII_ATLX_ESR 0x0F
|
|
#define MII_ATLX_PSCR 0x10
|
|
#define MII_ATLX_PSSR 0x11
|
|
|
|
/* PHY Control Register */
|
|
#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100,
|
|
* 00=10
|
|
*/
|
|
#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
|
|
#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
|
|
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
|
|
#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
|
|
#define MII_CR_POWER_DOWN 0x0800 /* Power down */
|
|
#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
|
|
#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100,
|
|
* 00=10
|
|
*/
|
|
#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
|
|
#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
|
|
#define MII_CR_SPEED_MASK 0x2040
|
|
#define MII_CR_SPEED_1000 0x0040
|
|
#define MII_CR_SPEED_100 0x2000
|
|
#define MII_CR_SPEED_10 0x0000
|
|
|
|
/* PHY Status Register */
|
|
#define MII_SR_EXTENDED_CAPS 0x0001 /* Ext register capabilities */
|
|
#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
|
|
#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
|
|
#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
|
|
#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
|
|
#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
|
|
#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
|
|
#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext stat info in Reg 0x0F */
|
|
#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
|
|
#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
|
|
#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
|
|
#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
|
|
#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
|
|
#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
|
|
#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
|
|
|
|
/* Link partner ability register */
|
|
#define MII_LPA_SLCT 0x001f /* Same as advertise selector */
|
|
#define MII_LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
|
|
#define MII_LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
|
|
#define MII_LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
|
|
#define MII_LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
|
|
#define MII_LPA_100BASE4 0x0200 /* 100BASE-T4 */
|
|
#define MII_LPA_PAUSE 0x0400 /* PAUSE */
|
|
#define MII_LPA_ASYPAUSE 0x0800 /* Asymmetrical PAUSE */
|
|
#define MII_LPA_RFAULT 0x2000 /* Link partner faulted */
|
|
#define MII_LPA_LPACK 0x4000 /* Link partner acked us */
|
|
#define MII_LPA_NPAGE 0x8000 /* Next page bit */
|
|
|
|
/* Autoneg Advertisement Register */
|
|
#define MII_AR_SELECTOR_FIELD 0x0001 /* IEEE 802.3 CSMA/CD */
|
|
#define MII_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
|
|
#define MII_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
|
|
#define MII_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
|
|
#define MII_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
|
|
#define MII_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
|
|
#define MII_AR_PAUSE 0x0400 /* Pause operation desired */
|
|
#define MII_AR_ASM_DIR 0x0800 /* Asymmetric Pause Dir bit */
|
|
#define MII_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
|
|
#define MII_AR_NEXT_PAGE 0x8000 /* Next Page ability support */
|
|
#define MII_AR_SPEED_MASK 0x01E0
|
|
#define MII_AR_DEFAULT_CAP_MASK 0x0DE0
|
|
|
|
/* 1000BASE-T Control Register */
|
|
#define MII_ATLX_CR_1000T_HD_CAPS 0x0100 /* Adv 1000T HD cap */
|
|
#define MII_ATLX_CR_1000T_FD_CAPS 0x0200 /* Adv 1000T FD cap */
|
|
#define MII_ATLX_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device,
|
|
* 0=DTE device */
|
|
#define MII_ATLX_CR_1000T_MS_VALUE 0x0800 /* 1=Config PHY as Master,
|
|
* 0=Configure PHY as Slave */
|
|
#define MII_ATLX_CR_1000T_MS_ENABLE 0x1000 /* 1=Man Master/Slave config,
|
|
* 0=Auto Master/Slave config
|
|
*/
|
|
#define MII_ATLX_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
|
|
#define MII_ATLX_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
|
|
#define MII_ATLX_CR_1000T_TEST_MODE_2 0x4000 /* Master Xmit Jitter test */
|
|
#define MII_ATLX_CR_1000T_TEST_MODE_3 0x6000 /* Slave Xmit Jitter test */
|
|
#define MII_ATLX_CR_1000T_TEST_MODE_4 0x8000 /* Xmitter Distortion test */
|
|
#define MII_ATLX_CR_1000T_SPEED_MASK 0x0300
|
|
#define MII_ATLX_CR_1000T_DEFAULT_CAP_MASK 0x0300
|
|
|
|
/* 1000BASE-T Status Register */
|
|
#define MII_ATLX_SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
|
|
#define MII_ATLX_SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
|
|
#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
|
|
#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
|
|
#define MII_ATLX_SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master
|
|
* 0=Slave
|
|
*/
|
|
#define MII_ATLX_SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config
|
|
* fault */
|
|
#define MII_ATLX_SR_1000T_REMOTE_RX_STATUS_SHIFT 12
|
|
#define MII_ATLX_SR_1000T_LOCAL_RX_STATUS_SHIFT 13
|
|
|
|
/* Extended Status Register */
|
|
#define MII_ATLX_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
|
|
#define MII_ATLX_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
|
|
#define MII_ATLX_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
|
|
#define MII_ATLX_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
|
|
|
|
/* ATLX PHY Specific Control Register */
|
|
#define MII_ATLX_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Func disabled */
|
|
#define MII_ATLX_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enbld */
|
|
#define MII_ATLX_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
|
|
#define MII_ATLX_PSCR_MAC_POWERDOWN 0x0008
|
|
#define MII_ATLX_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low
|
|
* 0=CLK125 toggling
|
|
*/
|
|
#define MII_ATLX_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5,
|
|
* Manual MDI configuration
|
|
*/
|
|
#define MII_ATLX_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
|
|
#define MII_ATLX_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover
|
|
* 100BASE-TX/10BASE-T: MDI
|
|
* Mode */
|
|
#define MII_ATLX_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
|
|
* all speeds.
|
|
*/
|
|
#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE 0x0080 /* 1=Enable Extended
|
|
* 10BASE-T distance
|
|
* (Lower 10BASE-T RX
|
|
* Threshold)
|
|
* 0=Normal 10BASE-T RX
|
|
* Threshold
|
|
*/
|
|
#define MII_ATLX_PSCR_MII_5BIT_ENABLE 0x0100 /* 1=5-Bit interface in
|
|
* 100BASE-TX
|
|
* 0=MII interface in
|
|
* 100BASE-TX
|
|
*/
|
|
#define MII_ATLX_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler dsbl */
|
|
#define MII_ATLX_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
|
|
#define MII_ATLX_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
|
|
#define MII_ATLX_PSCR_POLARITY_REVERSAL_SHIFT 1
|
|
#define MII_ATLX_PSCR_AUTO_X_MODE_SHIFT 5
|
|
#define MII_ATLX_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
|
|
|
|
/* ATLX PHY Specific Status Register */
|
|
#define MII_ATLX_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
|
|
#define MII_ATLX_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
|
|
#define MII_ATLX_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
|
|
#define MII_ATLX_PSSR_10MBS 0x0000 /* 00=10Mbs */
|
|
#define MII_ATLX_PSSR_100MBS 0x4000 /* 01=100Mbs */
|
|
#define MII_ATLX_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
|
|
|
|
/* PCI Command Register Bit Definitions */
|
|
#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
|
|
#define CMD_IO_SPACE 0x0001
|
|
#define CMD_MEMORY_SPACE 0x0002
|
|
#define CMD_BUS_MASTER 0x0004
|
|
|
|
/* Wake Up Filter Control */
|
|
#define ATLX_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
|
|
#define ATLX_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
|
|
#define ATLX_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
|
|
#define ATLX_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
|
|
#define ATLX_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
|
|
|
|
#define ADVERTISE_10_HALF 0x0001
|
|
#define ADVERTISE_10_FULL 0x0002
|
|
#define ADVERTISE_100_HALF 0x0004
|
|
#define ADVERTISE_100_FULL 0x0008
|
|
#define ADVERTISE_1000_HALF 0x0010
|
|
#define ADVERTISE_1000_FULL 0x0020
|
|
#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
|
|
#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
|
|
|
|
#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
|
|
#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
|
|
|
|
/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA */
|
|
#define EEPROM_SUM 0xBABA
|
|
#define NODE_ADDRESS_SIZE 6
|
|
|
|
struct atlx_spi_flash_dev {
|
|
const char *manu_name; /* manufacturer id */
|
|
/* op-code */
|
|
u8 cmd_wrsr;
|
|
u8 cmd_read;
|
|
u8 cmd_program;
|
|
u8 cmd_wren;
|
|
u8 cmd_wrdi;
|
|
u8 cmd_rdsr;
|
|
u8 cmd_rdid;
|
|
u8 cmd_sector_erase;
|
|
u8 cmd_chip_erase;
|
|
};
|
|
|
|
#endif /* ATLX_H */
|