aha/drivers/serial
Maciej W. Rozycki e6ee512f5a dz.c: Resource management
This is a set of changes to implement proper resource management in the
driver, including iomem space reservation and operating on physical
addresses ioremap()ped appropriately using accessory functions rather than
unportable direct assignments.

Some adjustments to code are made to reflect the architecture of the
interface, which is a centrally controlled multiport (or, as referred to
from DEC documentation, a serial line multiplexer, going up to 8 lines
originally) rather than a bundle of separate ports.

Types are changed, where applicable, to specify the width of hardware
registers explicitly.  The interrupt handler is now managed in the
->startup() and ->shutdown() calls for consistency with other drivers and
also in preparation to handle the handover from the initial firmware-based
console gracefully.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:24 -08:00
..
cpm_uart Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
jsm jsm: Remove further unneeded crud 2007-10-17 08:42:52 -07:00
8250.c serial: Coding style 2008-02-05 09:44:10 -08:00
8250.h
8250_accent.c
8250_acorn.c
8250_au1x00.c
8250_boca.c
8250_early.c serial: fix compile warning about putc 2007-11-05 15:12:32 -08:00
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h 2008-02-05 09:44:09 -08:00
8250_pnp.c serial: Coding style 2008-02-05 09:44:10 -08:00
21285.c [ARM] 21285 serial: fix build error 2008-02-04 13:14:06 +00:00
68328serial.c m68knommu: use IRQF_DISABLE in m68328serial.c 2008-02-01 21:00:01 +11:00
68328serial.h
68360serial.c
amba-pl010.c
amba-pl011.c amba-pl011, rename BIT macro 2007-10-19 11:53:42 -07:00
atmel_serial.c [ARM] 4660/3: at91: allow selecting UART for early kernel messages 2008-02-04 13:16:39 +00:00
bfin_5xx.c [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option 2008-01-22 15:29:18 +08:00
clps711x.c
crisv10.c CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
crisv10.h CRISv10 serial driver rewrite 2007-11-14 18:45:46 -08:00
dz.c dz.c: Resource management 2008-02-07 08:42:24 -08:00
dz.h dz: clean up and improve the setup of termios settings 2008-02-07 08:42:24 -08:00
icom.c kobject: convert icom to use kref, not kobject 2008-01-24 20:40:09 -08:00
icom.h Coding style fix drivers/serial/icom.h 2008-02-03 14:47:38 +02:00
imx.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c IP22ZILOG: fix lockup and sysrq 2007-11-29 09:24:53 -08:00
ip22zilog.h
Kconfig dz: update kconfig description 2008-02-07 08:42:24 -08:00
m32r_sio.c m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
m32r_sio.h m32r: serial: remove M32R_SIO_SHARE_IRQS 2007-10-16 09:43:04 -07:00
m32r_sio_reg.h
Makefile SC26XX: New serial driver for SC2681 uarts 2008-02-06 10:41:06 -08:00
mcf.c m68knommu: use ARRAY_SIZE in ColdFire serial driver 2008-02-05 09:44:21 -08:00
mcfserial.c
mcfserial.h
mpc52xx_uart.c [POWERPC] mpc5200: normalize compatible property bindings 2008-01-26 15:26:01 -07:00
mpsc.c serial: MPSC: set baudrate when BRG divider is set. 2008-02-05 09:44:10 -08:00
mux.c drivers/serial/: Spelling fixes 2008-02-03 17:29:25 +02:00
netx-serial.c
of_serial.c
pmac_zilog.c [POWERPC] Optionally use new device number for pmac_zilog 2007-09-22 14:49:21 +10:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled 2007-11-26 14:39:12 +00:00
s3c2410.c drivers/serial/s3c2410.c: remove dead config symbols 2008-02-05 09:44:09 -08:00
sa1100.c
sb1250-duart.c BCM1480 serial build fix 2007-09-11 17:21:19 -07:00
sc26xx.c SC26XX: New serial driver for SC2681 uarts 2008-02-06 10:41:06 -08:00
serial_core.c serial: speed setup failure reporting 2008-02-05 09:44:10 -08:00
serial_cs.c pcmcia: replace kio_addr_t with unsigned int everywhere 2008-02-05 09:44:08 -08:00
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c serial: fix serial_txx9 console initialization 2007-10-30 08:06:55 -07:00
sh-sci.c sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sh-sci.h sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sn_console.c
suncore.c [SERIAL]: Fix section mismatches in Sun serial console drivers. 2007-12-29 01:19:49 -08:00
suncore.h [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunhv.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunsab.h
sunsu.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.c [SERIAL] sparc: Infrastructure to fix section mismatch bugs. 2007-12-12 07:36:34 -08:00
sunzilog.h
uartlite.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
ucc_uart.c [POWERPC] qe-uart: add support for Freescale QUICCEngine UART 2008-01-23 19:34:12 -06:00
v850e_uart.c
vr41xx_siu.c
zs.c
zs.h