aha/arch/arm/mach-omap1/sram.S
Tony Lindgren 941132606c OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead
Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS,
and convert omap_read/write into a functions instead of a macros.

Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE.

In the long run, most code should use ioremap + __raw_read/write instead.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28 10:50:33 -07:00

57 lines
1.5 KiB
ArmAsm

/*
* linux/arch/arm/plat-omap/sram-fn.S
*
* Functions that need to be run in internal SRAM
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
#include <mach/hardware.h>
.text
/*
* Reprograms ULPD and CKCTL.
*/
ENTRY(omap1_sram_reprogram_clock)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
mov r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
tst r0, #1 << 4 @ want lock mode?
beq newck @ nope
bic r0, r0, #1 << 4 @ else clear lock bit
strh r0, [r2] @ set dpll into bypass mode
orr r0, r0, #1 << 4 @ set lock bit again
newck:
strh r1, [r3] @ write new ckctl value
strh r0, [r2] @ write new dpll value
mov r4, #0x0700 @ let the clocks settle
orr r4, r4, #0x00ff
delay: sub r4, r4, #1
cmp r4, #0
bne delay
lock: ldrh r4, [r2], #0 @ read back dpll value
tst r0, #1 << 4 @ want lock mode?
beq out @ nope
tst r4, #1 << 0 @ dpll rate locked?
beq lock @ try again
out:
ldmfd sp!, {r0 - r12, pc} @ restore regs and return
ENTRY(omap1_sram_reprogram_clock_sz)
.word . - omap1_sram_reprogram_clock