mirror of
https://github.com/adulau/aha.git
synced 2024-12-29 12:16:20 +00:00
7dcce1334f
Update my email address. Signed-off-by: Marcel Selhorst <m.selhorst@sirrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
642 lines
16 KiB
C
642 lines
16 KiB
C
/*
|
|
* Description:
|
|
* Device Driver for the Infineon Technologies
|
|
* SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module
|
|
* Specifications at www.trustedcomputinggroup.org
|
|
*
|
|
* Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com>
|
|
* Sirrix AG - security technologies, http://www.sirrix.com and
|
|
* Applied Data Security Group, Ruhr-University Bochum, Germany
|
|
* Project-Homepage: http://www.prosec.rub.de/tpm
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation, version 2 of the
|
|
* License.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pnp.h>
|
|
#include "tpm.h"
|
|
|
|
/* Infineon specific definitions */
|
|
/* maximum number of WTX-packages */
|
|
#define TPM_MAX_WTX_PACKAGES 50
|
|
/* msleep-Time for WTX-packages */
|
|
#define TPM_WTX_MSLEEP_TIME 20
|
|
/* msleep-Time --> Interval to check status register */
|
|
#define TPM_MSLEEP_TIME 3
|
|
/* gives number of max. msleep()-calls before throwing timeout */
|
|
#define TPM_MAX_TRIES 5000
|
|
#define TPM_INFINEON_DEV_VEN_VALUE 0x15D1
|
|
|
|
#define TPM_INF_IO_PORT 0x0
|
|
#define TPM_INF_IO_MEM 0x1
|
|
|
|
#define TPM_INF_ADDR 0x0
|
|
#define TPM_INF_DATA 0x1
|
|
|
|
struct tpm_inf_dev {
|
|
int iotype;
|
|
|
|
void __iomem *mem_base; /* MMIO ioremap'd addr */
|
|
unsigned long map_base; /* phys MMIO base */
|
|
unsigned long map_size; /* MMIO region size */
|
|
unsigned int index_off; /* index register offset */
|
|
|
|
unsigned int data_regs; /* Data registers */
|
|
unsigned int data_size;
|
|
|
|
unsigned int config_port; /* IO Port config index reg */
|
|
unsigned int config_size;
|
|
};
|
|
|
|
static struct tpm_inf_dev tpm_dev;
|
|
|
|
static inline void tpm_data_out(unsigned char data, unsigned char offset)
|
|
{
|
|
if (tpm_dev.iotype == TPM_INF_IO_PORT)
|
|
outb(data, tpm_dev.data_regs + offset);
|
|
else
|
|
writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
|
|
}
|
|
|
|
static inline unsigned char tpm_data_in(unsigned char offset)
|
|
{
|
|
if (tpm_dev.iotype == TPM_INF_IO_PORT)
|
|
return inb(tpm_dev.data_regs + offset);
|
|
else
|
|
return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
|
|
}
|
|
|
|
static inline void tpm_config_out(unsigned char data, unsigned char offset)
|
|
{
|
|
if (tpm_dev.iotype == TPM_INF_IO_PORT)
|
|
outb(data, tpm_dev.config_port + offset);
|
|
else
|
|
writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
|
|
}
|
|
|
|
static inline unsigned char tpm_config_in(unsigned char offset)
|
|
{
|
|
if (tpm_dev.iotype == TPM_INF_IO_PORT)
|
|
return inb(tpm_dev.config_port + offset);
|
|
else
|
|
return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
|
|
}
|
|
|
|
/* TPM header definitions */
|
|
enum infineon_tpm_header {
|
|
TPM_VL_VER = 0x01,
|
|
TPM_VL_CHANNEL_CONTROL = 0x07,
|
|
TPM_VL_CHANNEL_PERSONALISATION = 0x0A,
|
|
TPM_VL_CHANNEL_TPM = 0x0B,
|
|
TPM_VL_CONTROL = 0x00,
|
|
TPM_INF_NAK = 0x15,
|
|
TPM_CTRL_WTX = 0x10,
|
|
TPM_CTRL_WTX_ABORT = 0x18,
|
|
TPM_CTRL_WTX_ABORT_ACK = 0x18,
|
|
TPM_CTRL_ERROR = 0x20,
|
|
TPM_CTRL_CHAININGACK = 0x40,
|
|
TPM_CTRL_CHAINING = 0x80,
|
|
TPM_CTRL_DATA = 0x04,
|
|
TPM_CTRL_DATA_CHA = 0x84,
|
|
TPM_CTRL_DATA_CHA_ACK = 0xC4
|
|
};
|
|
|
|
enum infineon_tpm_register {
|
|
WRFIFO = 0x00,
|
|
RDFIFO = 0x01,
|
|
STAT = 0x02,
|
|
CMD = 0x03
|
|
};
|
|
|
|
enum infineon_tpm_command_bits {
|
|
CMD_DIS = 0x00,
|
|
CMD_LP = 0x01,
|
|
CMD_RES = 0x02,
|
|
CMD_IRQC = 0x06
|
|
};
|
|
|
|
enum infineon_tpm_status_bits {
|
|
STAT_XFE = 0x00,
|
|
STAT_LPA = 0x01,
|
|
STAT_FOK = 0x02,
|
|
STAT_TOK = 0x03,
|
|
STAT_IRQA = 0x06,
|
|
STAT_RDA = 0x07
|
|
};
|
|
|
|
/* some outgoing values */
|
|
enum infineon_tpm_values {
|
|
CHIP_ID1 = 0x20,
|
|
CHIP_ID2 = 0x21,
|
|
TPM_DAR = 0x30,
|
|
RESET_LP_IRQC_DISABLE = 0x41,
|
|
ENABLE_REGISTER_PAIR = 0x55,
|
|
IOLIMH = 0x60,
|
|
IOLIML = 0x61,
|
|
DISABLE_REGISTER_PAIR = 0xAA,
|
|
IDVENL = 0xF1,
|
|
IDVENH = 0xF2,
|
|
IDPDL = 0xF3,
|
|
IDPDH = 0xF4
|
|
};
|
|
|
|
static int number_of_wtx;
|
|
|
|
static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo)
|
|
{
|
|
int status;
|
|
int check = 0;
|
|
int i;
|
|
|
|
if (clear_wrfifo) {
|
|
for (i = 0; i < 4096; i++) {
|
|
status = tpm_data_in(WRFIFO);
|
|
if (status == 0xff) {
|
|
if (check == 5)
|
|
break;
|
|
else
|
|
check++;
|
|
}
|
|
}
|
|
}
|
|
/* Note: The values which are currently in the FIFO of the TPM
|
|
are thrown away since there is no usage for them. Usually,
|
|
this has nothing to say, since the TPM will give its answer
|
|
immediately or will be aborted anyway, so the data here is
|
|
usually garbage and useless.
|
|
We have to clean this, because the next communication with
|
|
the TPM would be rubbish, if there is still some old data
|
|
in the Read FIFO.
|
|
*/
|
|
i = 0;
|
|
do {
|
|
status = tpm_data_in(RDFIFO);
|
|
status = tpm_data_in(STAT);
|
|
i++;
|
|
if (i == TPM_MAX_TRIES)
|
|
return -EIO;
|
|
} while ((status & (1 << STAT_RDA)) != 0);
|
|
return 0;
|
|
}
|
|
|
|
static int wait(struct tpm_chip *chip, int wait_for_bit)
|
|
{
|
|
int status;
|
|
int i;
|
|
for (i = 0; i < TPM_MAX_TRIES; i++) {
|
|
status = tpm_data_in(STAT);
|
|
/* check the status-register if wait_for_bit is set */
|
|
if (status & 1 << wait_for_bit)
|
|
break;
|
|
msleep(TPM_MSLEEP_TIME);
|
|
}
|
|
if (i == TPM_MAX_TRIES) { /* timeout occurs */
|
|
if (wait_for_bit == STAT_XFE)
|
|
dev_err(chip->dev, "Timeout in wait(STAT_XFE)\n");
|
|
if (wait_for_bit == STAT_RDA)
|
|
dev_err(chip->dev, "Timeout in wait(STAT_RDA)\n");
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
};
|
|
|
|
static void wait_and_send(struct tpm_chip *chip, u8 sendbyte)
|
|
{
|
|
wait(chip, STAT_XFE);
|
|
tpm_data_out(sendbyte, WRFIFO);
|
|
}
|
|
|
|
/* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more
|
|
calculation time, it sends a WTX-package, which has to be acknowledged
|
|
or aborted. This usually occurs if you are hammering the TPM with key
|
|
creation. Set the maximum number of WTX-packages in the definitions
|
|
above, if the number is reached, the waiting-time will be denied
|
|
and the TPM command has to be resend.
|
|
*/
|
|
|
|
static void tpm_wtx(struct tpm_chip *chip)
|
|
{
|
|
number_of_wtx++;
|
|
dev_info(chip->dev, "Granting WTX (%02d / %02d)\n",
|
|
number_of_wtx, TPM_MAX_WTX_PACKAGES);
|
|
wait_and_send(chip, TPM_VL_VER);
|
|
wait_and_send(chip, TPM_CTRL_WTX);
|
|
wait_and_send(chip, 0x00);
|
|
wait_and_send(chip, 0x00);
|
|
msleep(TPM_WTX_MSLEEP_TIME);
|
|
}
|
|
|
|
static void tpm_wtx_abort(struct tpm_chip *chip)
|
|
{
|
|
dev_info(chip->dev, "Aborting WTX\n");
|
|
wait_and_send(chip, TPM_VL_VER);
|
|
wait_and_send(chip, TPM_CTRL_WTX_ABORT);
|
|
wait_and_send(chip, 0x00);
|
|
wait_and_send(chip, 0x00);
|
|
number_of_wtx = 0;
|
|
msleep(TPM_WTX_MSLEEP_TIME);
|
|
}
|
|
|
|
static int tpm_inf_recv(struct tpm_chip *chip, u8 * buf, size_t count)
|
|
{
|
|
int i;
|
|
int ret;
|
|
u32 size = 0;
|
|
number_of_wtx = 0;
|
|
|
|
recv_begin:
|
|
/* start receiving header */
|
|
for (i = 0; i < 4; i++) {
|
|
ret = wait(chip, STAT_RDA);
|
|
if (ret)
|
|
return -EIO;
|
|
buf[i] = tpm_data_in(RDFIFO);
|
|
}
|
|
|
|
if (buf[0] != TPM_VL_VER) {
|
|
dev_err(chip->dev,
|
|
"Wrong transport protocol implementation!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (buf[1] == TPM_CTRL_DATA) {
|
|
/* size of the data received */
|
|
size = ((buf[2] << 8) | buf[3]);
|
|
|
|
for (i = 0; i < size; i++) {
|
|
wait(chip, STAT_RDA);
|
|
buf[i] = tpm_data_in(RDFIFO);
|
|
}
|
|
|
|
if ((size == 0x6D00) && (buf[1] == 0x80)) {
|
|
dev_err(chip->dev, "Error handling on vendor layer!\n");
|
|
return -EIO;
|
|
}
|
|
|
|
for (i = 0; i < size; i++)
|
|
buf[i] = buf[i + 6];
|
|
|
|
size = size - 6;
|
|
return size;
|
|
}
|
|
|
|
if (buf[1] == TPM_CTRL_WTX) {
|
|
dev_info(chip->dev, "WTX-package received\n");
|
|
if (number_of_wtx < TPM_MAX_WTX_PACKAGES) {
|
|
tpm_wtx(chip);
|
|
goto recv_begin;
|
|
} else {
|
|
tpm_wtx_abort(chip);
|
|
goto recv_begin;
|
|
}
|
|
}
|
|
|
|
if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) {
|
|
dev_info(chip->dev, "WTX-abort acknowledged\n");
|
|
return size;
|
|
}
|
|
|
|
if (buf[1] == TPM_CTRL_ERROR) {
|
|
dev_err(chip->dev, "ERROR-package received:\n");
|
|
if (buf[4] == TPM_INF_NAK)
|
|
dev_err(chip->dev,
|
|
"-> Negative acknowledgement"
|
|
" - retransmit command!\n");
|
|
return -EIO;
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count)
|
|
{
|
|
int i;
|
|
int ret;
|
|
u8 count_high, count_low, count_4, count_3, count_2, count_1;
|
|
|
|
/* Disabling Reset, LP and IRQC */
|
|
tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
|
|
|
|
ret = empty_fifo(chip, 1);
|
|
if (ret) {
|
|
dev_err(chip->dev, "Timeout while clearing FIFO\n");
|
|
return -EIO;
|
|
}
|
|
|
|
ret = wait(chip, STAT_XFE);
|
|
if (ret)
|
|
return -EIO;
|
|
|
|
count_4 = (count & 0xff000000) >> 24;
|
|
count_3 = (count & 0x00ff0000) >> 16;
|
|
count_2 = (count & 0x0000ff00) >> 8;
|
|
count_1 = (count & 0x000000ff);
|
|
count_high = ((count + 6) & 0xffffff00) >> 8;
|
|
count_low = ((count + 6) & 0x000000ff);
|
|
|
|
/* Sending Header */
|
|
wait_and_send(chip, TPM_VL_VER);
|
|
wait_and_send(chip, TPM_CTRL_DATA);
|
|
wait_and_send(chip, count_high);
|
|
wait_and_send(chip, count_low);
|
|
|
|
/* Sending Data Header */
|
|
wait_and_send(chip, TPM_VL_VER);
|
|
wait_and_send(chip, TPM_VL_CHANNEL_TPM);
|
|
wait_and_send(chip, count_4);
|
|
wait_and_send(chip, count_3);
|
|
wait_and_send(chip, count_2);
|
|
wait_and_send(chip, count_1);
|
|
|
|
/* Sending Data */
|
|
for (i = 0; i < count; i++) {
|
|
wait_and_send(chip, buf[i]);
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static void tpm_inf_cancel(struct tpm_chip *chip)
|
|
{
|
|
/*
|
|
Since we are using the legacy mode to communicate
|
|
with the TPM, we have no cancel functions, but have
|
|
a workaround for interrupting the TPM through WTX.
|
|
*/
|
|
}
|
|
|
|
static u8 tpm_inf_status(struct tpm_chip *chip)
|
|
{
|
|
return tpm_data_in(STAT);
|
|
}
|
|
|
|
static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
|
|
static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
|
|
static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL);
|
|
static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
|
|
|
|
static struct attribute *inf_attrs[] = {
|
|
&dev_attr_pubek.attr,
|
|
&dev_attr_pcrs.attr,
|
|
&dev_attr_caps.attr,
|
|
&dev_attr_cancel.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group inf_attr_grp = {.attrs = inf_attrs };
|
|
|
|
static const struct file_operations inf_ops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.open = tpm_open,
|
|
.read = tpm_read,
|
|
.write = tpm_write,
|
|
.release = tpm_release,
|
|
};
|
|
|
|
static const struct tpm_vendor_specific tpm_inf = {
|
|
.recv = tpm_inf_recv,
|
|
.send = tpm_inf_send,
|
|
.cancel = tpm_inf_cancel,
|
|
.status = tpm_inf_status,
|
|
.req_complete_mask = 0,
|
|
.req_complete_val = 0,
|
|
.attr_group = &inf_attr_grp,
|
|
.miscdev = {.fops = &inf_ops,},
|
|
};
|
|
|
|
static const struct pnp_device_id tpm_pnp_tbl[] = {
|
|
/* Infineon TPMs */
|
|
{"IFX0101", 0},
|
|
{"IFX0102", 0},
|
|
{"", 0}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
|
|
|
|
static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
|
|
const struct pnp_device_id *dev_id)
|
|
{
|
|
int rc = 0;
|
|
u8 iol, ioh;
|
|
int vendorid[2];
|
|
int version[2];
|
|
int productid[2];
|
|
char chipname[20];
|
|
struct tpm_chip *chip;
|
|
|
|
/* read IO-ports through PnP */
|
|
if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
|
|
!(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
|
|
|
|
tpm_dev.iotype = TPM_INF_IO_PORT;
|
|
|
|
tpm_dev.config_port = pnp_port_start(dev, 0);
|
|
tpm_dev.config_size = pnp_port_len(dev, 0);
|
|
tpm_dev.data_regs = pnp_port_start(dev, 1);
|
|
tpm_dev.data_size = pnp_port_len(dev, 1);
|
|
if ((tpm_dev.data_size < 4) || (tpm_dev.config_size < 2)) {
|
|
rc = -EINVAL;
|
|
goto err_last;
|
|
}
|
|
dev_info(&dev->dev, "Found %s with ID %s\n",
|
|
dev->name, dev_id->id);
|
|
if (!((tpm_dev.data_regs >> 8) & 0xff)) {
|
|
rc = -EINVAL;
|
|
goto err_last;
|
|
}
|
|
/* publish my base address and request region */
|
|
if (request_region(tpm_dev.data_regs, tpm_dev.data_size,
|
|
"tpm_infineon0") == NULL) {
|
|
rc = -EINVAL;
|
|
goto err_last;
|
|
}
|
|
if (request_region(tpm_dev.config_port, tpm_dev.config_size,
|
|
"tpm_infineon0") == NULL) {
|
|
release_region(tpm_dev.data_regs, tpm_dev.data_size);
|
|
rc = -EINVAL;
|
|
goto err_last;
|
|
}
|
|
} else if (pnp_mem_valid(dev, 0) &&
|
|
!(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) {
|
|
|
|
tpm_dev.iotype = TPM_INF_IO_MEM;
|
|
|
|
tpm_dev.map_base = pnp_mem_start(dev, 0);
|
|
tpm_dev.map_size = pnp_mem_len(dev, 0);
|
|
|
|
dev_info(&dev->dev, "Found %s with ID %s\n",
|
|
dev->name, dev_id->id);
|
|
|
|
/* publish my base address and request region */
|
|
if (request_mem_region(tpm_dev.map_base, tpm_dev.map_size,
|
|
"tpm_infineon0") == NULL) {
|
|
rc = -EINVAL;
|
|
goto err_last;
|
|
}
|
|
|
|
tpm_dev.mem_base = ioremap(tpm_dev.map_base, tpm_dev.map_size);
|
|
if (tpm_dev.mem_base == NULL) {
|
|
release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
|
|
rc = -EINVAL;
|
|
goto err_last;
|
|
}
|
|
|
|
/*
|
|
* The only known MMIO based Infineon TPM system provides
|
|
* a single large mem region with the device config
|
|
* registers at the default TPM_ADDR. The data registers
|
|
* seem like they could be placed anywhere within the MMIO
|
|
* region, but lets just put them at zero offset.
|
|
*/
|
|
tpm_dev.index_off = TPM_ADDR;
|
|
tpm_dev.data_regs = 0x0;
|
|
} else {
|
|
rc = -EINVAL;
|
|
goto err_last;
|
|
}
|
|
|
|
/* query chip for its vendor, its version number a.s.o. */
|
|
tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
|
|
tpm_config_out(IDVENL, TPM_INF_ADDR);
|
|
vendorid[1] = tpm_config_in(TPM_INF_DATA);
|
|
tpm_config_out(IDVENH, TPM_INF_ADDR);
|
|
vendorid[0] = tpm_config_in(TPM_INF_DATA);
|
|
tpm_config_out(IDPDL, TPM_INF_ADDR);
|
|
productid[1] = tpm_config_in(TPM_INF_DATA);
|
|
tpm_config_out(IDPDH, TPM_INF_ADDR);
|
|
productid[0] = tpm_config_in(TPM_INF_DATA);
|
|
tpm_config_out(CHIP_ID1, TPM_INF_ADDR);
|
|
version[1] = tpm_config_in(TPM_INF_DATA);
|
|
tpm_config_out(CHIP_ID2, TPM_INF_ADDR);
|
|
version[0] = tpm_config_in(TPM_INF_DATA);
|
|
|
|
switch ((productid[0] << 8) | productid[1]) {
|
|
case 6:
|
|
snprintf(chipname, sizeof(chipname), " (SLD 9630 TT 1.1)");
|
|
break;
|
|
case 11:
|
|
snprintf(chipname, sizeof(chipname), " (SLB 9635 TT 1.2)");
|
|
break;
|
|
default:
|
|
snprintf(chipname, sizeof(chipname), " (unknown chip)");
|
|
break;
|
|
}
|
|
|
|
if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
|
|
|
|
/* configure TPM with IO-ports */
|
|
tpm_config_out(IOLIMH, TPM_INF_ADDR);
|
|
tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
|
|
tpm_config_out(IOLIML, TPM_INF_ADDR);
|
|
tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
|
|
|
|
/* control if IO-ports are set correctly */
|
|
tpm_config_out(IOLIMH, TPM_INF_ADDR);
|
|
ioh = tpm_config_in(TPM_INF_DATA);
|
|
tpm_config_out(IOLIML, TPM_INF_ADDR);
|
|
iol = tpm_config_in(TPM_INF_DATA);
|
|
|
|
if ((ioh << 8 | iol) != tpm_dev.data_regs) {
|
|
dev_err(&dev->dev,
|
|
"Could not set IO-data registers to 0x%x\n",
|
|
tpm_dev.data_regs);
|
|
rc = -EIO;
|
|
goto err_release_region;
|
|
}
|
|
|
|
/* activate register */
|
|
tpm_config_out(TPM_DAR, TPM_INF_ADDR);
|
|
tpm_config_out(0x01, TPM_INF_DATA);
|
|
tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
|
|
|
|
/* disable RESET, LP and IRQC */
|
|
tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
|
|
|
|
/* Finally, we're done, print some infos */
|
|
dev_info(&dev->dev, "TPM found: "
|
|
"config base 0x%lx, "
|
|
"data base 0x%lx, "
|
|
"chip version 0x%02x%02x, "
|
|
"vendor id 0x%x%x (Infineon), "
|
|
"product id 0x%02x%02x"
|
|
"%s\n",
|
|
tpm_dev.iotype == TPM_INF_IO_PORT ?
|
|
tpm_dev.config_port :
|
|
tpm_dev.map_base + tpm_dev.index_off,
|
|
tpm_dev.iotype == TPM_INF_IO_PORT ?
|
|
tpm_dev.data_regs :
|
|
tpm_dev.map_base + tpm_dev.data_regs,
|
|
version[0], version[1],
|
|
vendorid[0], vendorid[1],
|
|
productid[0], productid[1], chipname);
|
|
|
|
if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf)))
|
|
goto err_release_region;
|
|
|
|
return 0;
|
|
} else {
|
|
rc = -ENODEV;
|
|
goto err_release_region;
|
|
}
|
|
|
|
err_release_region:
|
|
if (tpm_dev.iotype == TPM_INF_IO_PORT) {
|
|
release_region(tpm_dev.data_regs, tpm_dev.data_size);
|
|
release_region(tpm_dev.config_port, tpm_dev.config_size);
|
|
} else {
|
|
iounmap(tpm_dev.mem_base);
|
|
release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
|
|
}
|
|
|
|
err_last:
|
|
return rc;
|
|
}
|
|
|
|
static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
|
|
{
|
|
struct tpm_chip *chip = pnp_get_drvdata(dev);
|
|
|
|
if (chip) {
|
|
if (tpm_dev.iotype == TPM_INF_IO_PORT) {
|
|
release_region(tpm_dev.data_regs, tpm_dev.data_size);
|
|
release_region(tpm_dev.config_port,
|
|
tpm_dev.config_size);
|
|
} else {
|
|
iounmap(tpm_dev.mem_base);
|
|
release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
|
|
}
|
|
tpm_remove_hardware(chip->dev);
|
|
}
|
|
}
|
|
|
|
static struct pnp_driver tpm_inf_pnp_driver = {
|
|
.name = "tpm_inf_pnp",
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.suspend = tpm_pm_suspend,
|
|
.resume = tpm_pm_resume,
|
|
},
|
|
.id_table = tpm_pnp_tbl,
|
|
.probe = tpm_inf_pnp_probe,
|
|
.remove = __devexit_p(tpm_inf_pnp_remove),
|
|
};
|
|
|
|
static int __init init_inf(void)
|
|
{
|
|
return pnp_register_driver(&tpm_inf_pnp_driver);
|
|
}
|
|
|
|
static void __exit cleanup_inf(void)
|
|
{
|
|
pnp_unregister_driver(&tpm_inf_pnp_driver);
|
|
}
|
|
|
|
module_init(init_inf);
|
|
module_exit(cleanup_inf);
|
|
|
|
MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>");
|
|
MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
|
|
MODULE_VERSION("1.9");
|
|
MODULE_LICENSE("GPL");
|