mirror of
https://github.com/adulau/aha.git
synced 2025-01-04 07:03:38 +00:00
a070e66ae8
This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus according to the latest HW Getting Started Guide (rev 3.3, pilot boards), USB "POWER" GPIO polarity has changed, it is no longer inverted. This patch makes USB Host somewhat work on pilot boards, though there are still some problems with determining devices speed and long bulk transfers. Reported-by: Liu Yu <Yu.Liu@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
718 lines
18 KiB
Text
718 lines
18 KiB
Text
/*
|
|
* MPC8569E MDS Device Tree Source
|
|
*
|
|
* Copyright (C) 2009 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "MPC8569EMDS";
|
|
compatible = "fsl,MPC8569EMDS";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
ethernet2 = &enet2;
|
|
ethernet3 = &enet3;
|
|
ethernet5 = &enet5;
|
|
ethernet7 = &enet7;
|
|
pci1 = &pci1;
|
|
rapidio0 = &rio0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8569@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>; // 32 bytes
|
|
i-cache-line-size = <32>; // 32 bytes
|
|
d-cache-size = <0x8000>; // L1, 32K
|
|
i-cache-size = <0x8000>; // L1, 32K
|
|
timebase-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
clock-frequency = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
localbus@e0005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
|
|
reg = <0xe0005000 0x1000>;
|
|
interrupts = <19 2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
ranges = <0x0 0x0 0xfe000000 0x02000000
|
|
0x1 0x0 0xf8000000 0x00008000
|
|
0x2 0x0 0xf0000000 0x04000000
|
|
0x3 0x0 0xfc000000 0x00008000
|
|
0x4 0x0 0xf8008000 0x00008000
|
|
0x5 0x0 0xf8010000 0x00008000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x02000000>;
|
|
bank-width = <1>;
|
|
device-width = <1>;
|
|
partition@0 {
|
|
label = "ramdisk";
|
|
reg = <0x00000000 0x01c00000>;
|
|
};
|
|
partition@1c00000 {
|
|
label = "kernel";
|
|
reg = <0x01c00000 0x002e0000>;
|
|
};
|
|
partiton@1ee0000 {
|
|
label = "dtb";
|
|
reg = <0x01ee0000 0x00020000>;
|
|
};
|
|
partition@1f00000 {
|
|
label = "firmware";
|
|
reg = <0x01f00000 0x00080000>;
|
|
read-only;
|
|
};
|
|
partition@1f80000 {
|
|
label = "u-boot";
|
|
reg = <0x01f80000 0x00080000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
bcsr@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8569mds-bcsr";
|
|
reg = <1 0 0x8000>;
|
|
ranges = <0 1 0 0x8000>;
|
|
|
|
bcsr17: gpio-controller@11 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8569mds-bcsr-gpio";
|
|
reg = <0x11 0x1>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
|
|
nand@3,0 {
|
|
compatible = "fsl,mpc8569-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <3 0 0x8000>;
|
|
};
|
|
|
|
pib@4,0 {
|
|
compatible = "fsl,mpc8569mds-pib";
|
|
reg = <4 0 0x8000>;
|
|
};
|
|
|
|
pib@5,0 {
|
|
compatible = "fsl,mpc8569mds-pib";
|
|
reg = <5 0 0x8000>;
|
|
};
|
|
};
|
|
|
|
soc@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "fsl,mpc8569-immr", "simple-bus";
|
|
ranges = <0x0 0xe0000000 0x100000>;
|
|
bus-frequency = <0>;
|
|
|
|
ecm-law@0 {
|
|
compatible = "fsl,ecm-law";
|
|
reg = <0x0 0x1000>;
|
|
fsl,num-laws = <10>;
|
|
};
|
|
|
|
ecm@1000 {
|
|
compatible = "fsl,mpc8569-ecm", "fsl,ecm";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <17 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,mpc8569-memory-controller";
|
|
reg = <0x2000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <18 2>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1374";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
L2: l2-cache-controller@20000 {
|
|
compatible = "fsl,mpc8569-l2-cache-controller";
|
|
reg = <0x20000 0x1000>;
|
|
cache-line-size = <32>; // 32 bytes
|
|
cache-size = <0x80000>; // L2, 512K
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
};
|
|
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
|
|
reg = <0x21300 0x4>;
|
|
ranges = <0x0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8569-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <20 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8569-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <21 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8569-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <22 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8569-dma-channel",
|
|
"fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|
|
|
|
sdhci@2e000 {
|
|
compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
|
|
reg = <0x2e000 0x1000>;
|
|
interrupts = <72 0x8>;
|
|
interrupt-parent = <&mpic>;
|
|
/* Filled in by U-Boot */
|
|
clock-frequency = <0>;
|
|
status = "disabled";
|
|
sdhci,1-bit-only;
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
|
|
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <45 2 58 2>;
|
|
interrupt-parent = <&mpic>;
|
|
fsl,num-channels = <4>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0xbfe>;
|
|
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x40000 0x40000>;
|
|
compatible = "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
};
|
|
|
|
msi@41600 {
|
|
compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
|
|
reg = <0x41600 0x80>;
|
|
msi-available-ranges = <0 0x100>;
|
|
interrupts = <
|
|
0xe0 0
|
|
0xe1 0
|
|
0xe2 0
|
|
0xe3 0
|
|
0xe4 0
|
|
0xe5 0
|
|
0xe6 0
|
|
0xe7 0>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
global-utilities@e0000 {
|
|
compatible = "fsl,mpc8569-guts";
|
|
reg = <0xe0000 0x1000>;
|
|
fsl,has-rstcr;
|
|
};
|
|
|
|
par_io@e0100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xe0100 0x100>;
|
|
ranges = <0x0 0xe0100 0x100>;
|
|
device_type = "par_io";
|
|
num-ports = <7>;
|
|
|
|
qe_pio_e: gpio-controller@80 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8569-qe-pario-bank",
|
|
"fsl,mpc8323-qe-pario-bank";
|
|
reg = <0x80 0x18>;
|
|
gpio-controller;
|
|
};
|
|
|
|
qe_pio_f: gpio-controller@a0 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8569-qe-pario-bank",
|
|
"fsl,mpc8323-qe-pario-bank";
|
|
reg = <0xa0 0x18>;
|
|
gpio-controller;
|
|
};
|
|
|
|
pio1: ucc_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
|
|
0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
|
|
0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */
|
|
0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */
|
|
0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */
|
|
0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
|
|
0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */
|
|
0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */
|
|
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
|
|
0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
|
|
0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
|
|
0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */
|
|
0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */
|
|
0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */
|
|
};
|
|
|
|
pio2: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
|
|
0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
|
|
0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */
|
|
0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */
|
|
0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */
|
|
0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */
|
|
0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */
|
|
0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */
|
|
0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */
|
|
0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */
|
|
0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */
|
|
0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */
|
|
0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */
|
|
0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */
|
|
};
|
|
|
|
pio3: ucc_pin@03 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
|
|
0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
|
|
0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */
|
|
0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */
|
|
0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */
|
|
0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */
|
|
0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */
|
|
0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */
|
|
0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */
|
|
0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */
|
|
0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */
|
|
0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */
|
|
0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */
|
|
0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */
|
|
};
|
|
|
|
pio4: ucc_pin@04 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
|
|
0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
|
|
0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */
|
|
0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */
|
|
0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */
|
|
0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */
|
|
0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */
|
|
0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */
|
|
0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */
|
|
0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */
|
|
0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */
|
|
0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */
|
|
0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */
|
|
0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */
|
|
};
|
|
};
|
|
};
|
|
|
|
qe@e0080000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "qe";
|
|
compatible = "fsl,qe";
|
|
ranges = <0x0 0xe0080000 0x40000>;
|
|
reg = <0xe0080000 0x480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
fsl,qe-num-riscs = <4>;
|
|
fsl,qe-num-snums = <46>;
|
|
|
|
qeic: interrupt-controller@80 {
|
|
interrupt-controller;
|
|
compatible = "fsl,qe-ic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x80 0x80>;
|
|
interrupts = <46 2 46 2>; //high:30 low:30
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
timer@440 {
|
|
compatible = "fsl,mpc8569-qe-gtm",
|
|
"fsl,qe-gtm", "fsl,gtm";
|
|
reg = <0x440 0x40>;
|
|
interrupts = <12 13 14 15>;
|
|
interrupt-parent = <&qeic>;
|
|
/* Filled in by U-Boot */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
spi@4c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
|
|
reg = <0x4c0 0x40>;
|
|
cell-index = <0>;
|
|
interrupts = <2>;
|
|
interrupt-parent = <&qeic>;
|
|
gpios = <&qe_pio_e 30 0>;
|
|
mode = "cpu-qe";
|
|
|
|
serial-flash@0 {
|
|
compatible = "stm,m25p40";
|
|
reg = <0>;
|
|
spi-max-frequency = <25000000>;
|
|
};
|
|
};
|
|
|
|
spi@500 {
|
|
cell-index = <1>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x500 0x40>;
|
|
interrupts = <1>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
usb@6c0 {
|
|
compatible = "fsl,mpc8569-qe-usb",
|
|
"fsl,mpc8323-qe-usb";
|
|
reg = <0x6c0 0x40 0x8b00 0x100>;
|
|
interrupts = <11>;
|
|
interrupt-parent = <&qeic>;
|
|
fsl,fullspeed-clock = "clk5";
|
|
fsl,lowspeed-clock = "brg10";
|
|
gpios = <&qe_pio_f 3 0 /* USBOE */
|
|
&qe_pio_f 4 0 /* USBTP */
|
|
&qe_pio_f 5 0 /* USBTN */
|
|
&qe_pio_f 6 0 /* USBRP */
|
|
&qe_pio_f 8 0 /* USBRN */
|
|
&bcsr17 1 0 /* SPEED */
|
|
&bcsr17 2 0>; /* POWER */
|
|
};
|
|
|
|
enet0: ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <1>;
|
|
reg = <0x2000 0x200>;
|
|
interrupts = <32>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk12";
|
|
pio-handle = <&pio1>;
|
|
phy-handle = <&qe_phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
mdio@2120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2120 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
qe_phy0: ethernet-phy@07 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <0x7>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy1: ethernet-phy@01 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <0x1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy2: ethernet-phy@02 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <3 1>;
|
|
reg = <0x2>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy3: ethernet-phy@03 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <4 1>;
|
|
reg = <0x3>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy5: ethernet-phy@04 {
|
|
interrupt-parent = <&mpic>;
|
|
reg = <0x04>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy7: ethernet-phy@06 {
|
|
interrupt-parent = <&mpic>;
|
|
reg = <0x6>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
mdio@3520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3520 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
tbi0: tbi-phy@15 {
|
|
reg = <0x15>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
mdio@3720 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3720 0x38>;
|
|
compatible = "fsl,ucc-mdio";
|
|
tbi1: tbi-phy@17 {
|
|
reg = <0x17>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet2: ucc@2200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <3>;
|
|
reg = <0x2200 0x200>;
|
|
interrupts = <34>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk12";
|
|
pio-handle = <&pio3>;
|
|
phy-handle = <&qe_phy2>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
enet1: ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <2>;
|
|
reg = <0x3000 0x200>;
|
|
interrupts = <33>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk17";
|
|
pio-handle = <&pio2>;
|
|
phy-handle = <&qe_phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
enet3: ucc@3200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <4>;
|
|
reg = <0x3200 0x200>;
|
|
interrupts = <35>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk17";
|
|
pio-handle = <&pio4>;
|
|
phy-handle = <&qe_phy3>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
enet5: ucc@3400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <6>;
|
|
reg = <0x3400 0x200>;
|
|
interrupts = <41>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "none";
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&qe_phy5>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
enet7: ucc@3600 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <8>;
|
|
reg = <0x3600 0x200>;
|
|
interrupts = <43>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "none";
|
|
tbi-handle = <&tbi1>;
|
|
phy-handle = <&qe_phy7>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
muram@10000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
ranges = <0x0 0x10000 0x20000>;
|
|
|
|
data-only@0 {
|
|
compatible = "fsl,qe-muram-data",
|
|
"fsl,cpm-muram-data";
|
|
reg = <0x0 0x20000>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
/* PCI Express */
|
|
pci1: pcie@e000a000 {
|
|
compatible = "fsl,mpc8548-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe000a000 0x1000>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 (PEX) */
|
|
00000 0x0 0x0 0x1 &mpic 0x0 0x1
|
|
00000 0x0 0x0 0x2 &mpic 0x1 0x1
|
|
00000 0x0 0x0 0x3 &mpic 0x2 0x1
|
|
00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
|
|
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <26 2>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
|
|
0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
|
|
clock-frequency = <33333333>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x10000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x800000>;
|
|
};
|
|
};
|
|
|
|
rio0: rapidio@e00c00000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
|
|
reg = <0xe00c0000 0x20000>;
|
|
ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
|
|
interrupts = <48 2 /* error */
|
|
49 2 /* bell_outb */
|
|
50 2 /* bell_inb */
|
|
53 2 /* msg1_tx */
|
|
54 2 /* msg1_rx */
|
|
55 2 /* msg2_tx */
|
|
56 2 /* msg2_rx */>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
};
|