mirror of
https://github.com/adulau/aha.git
synced 2024-12-30 20:56:23 +00:00
042a53a9e4
skb_dma_unmap() is quite expensive for small packets, because we use two different cache lines from skb_shared_info. One to access nr_frags, one to access dma_maps[0] Instead of dma_maps being an array of MAX_SKB_FRAGS + 1 elements, let dma_head alone in a new dma_head field, close to nr_frags, to reduce cache lines misses. Tested on my dev machine (bnx2 & tg3 adapters), nice speedup ! Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
13634 lines
362 KiB
C
13634 lines
362 KiB
C
/*
|
|
* tg3.c: Broadcom Tigon3 ethernet driver.
|
|
*
|
|
* Copyright (C) 2001, 2002, 2003, 2004 David S. Miller (davem@redhat.com)
|
|
* Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com)
|
|
* Copyright (C) 2004 Sun Microsystems Inc.
|
|
* Copyright (C) 2005-2009 Broadcom Corporation.
|
|
*
|
|
* Firmware is:
|
|
* Derived from proprietary unpublished source code,
|
|
* Copyright (C) 2000-2003 Broadcom Corporation.
|
|
*
|
|
* Permission is hereby granted for the distribution of this firmware
|
|
* data in hexadecimal or equivalent format, provided this copyright
|
|
* notice is accompanying it.
|
|
*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/in.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/brcmphy.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/prefetch.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/firmware.h>
|
|
|
|
#include <net/checksum.h>
|
|
#include <net/ip.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#ifdef CONFIG_SPARC
|
|
#include <asm/idprom.h>
|
|
#include <asm/prom.h>
|
|
#endif
|
|
|
|
#define BAR_0 0
|
|
#define BAR_2 2
|
|
|
|
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
|
|
#define TG3_VLAN_TAG_USED 1
|
|
#else
|
|
#define TG3_VLAN_TAG_USED 0
|
|
#endif
|
|
|
|
#include "tg3.h"
|
|
|
|
#define DRV_MODULE_NAME "tg3"
|
|
#define PFX DRV_MODULE_NAME ": "
|
|
#define DRV_MODULE_VERSION "3.99"
|
|
#define DRV_MODULE_RELDATE "April 20, 2009"
|
|
|
|
#define TG3_DEF_MAC_MODE 0
|
|
#define TG3_DEF_RX_MODE 0
|
|
#define TG3_DEF_TX_MODE 0
|
|
#define TG3_DEF_MSG_ENABLE \
|
|
(NETIF_MSG_DRV | \
|
|
NETIF_MSG_PROBE | \
|
|
NETIF_MSG_LINK | \
|
|
NETIF_MSG_TIMER | \
|
|
NETIF_MSG_IFDOWN | \
|
|
NETIF_MSG_IFUP | \
|
|
NETIF_MSG_RX_ERR | \
|
|
NETIF_MSG_TX_ERR)
|
|
|
|
/* length of time before we decide the hardware is borked,
|
|
* and dev->tx_timeout() should be called to fix the problem
|
|
*/
|
|
#define TG3_TX_TIMEOUT (5 * HZ)
|
|
|
|
/* hardware minimum and maximum for a single frame's data payload */
|
|
#define TG3_MIN_MTU 60
|
|
#define TG3_MAX_MTU(tp) \
|
|
((tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) ? 9000 : 1500)
|
|
|
|
/* These numbers seem to be hard coded in the NIC firmware somehow.
|
|
* You can't change the ring sizes, but you can change where you place
|
|
* them in the NIC onboard memory.
|
|
*/
|
|
#define TG3_RX_RING_SIZE 512
|
|
#define TG3_DEF_RX_RING_PENDING 200
|
|
#define TG3_RX_JUMBO_RING_SIZE 256
|
|
#define TG3_DEF_RX_JUMBO_RING_PENDING 100
|
|
|
|
/* Do not place this n-ring entries value into the tp struct itself,
|
|
* we really want to expose these constants to GCC so that modulo et
|
|
* al. operations are done with shifts and masks instead of with
|
|
* hw multiply/modulo instructions. Another solution would be to
|
|
* replace things like '% foo' with '& (foo - 1)'.
|
|
*/
|
|
#define TG3_RX_RCB_RING_SIZE(tp) \
|
|
((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ? 512 : 1024)
|
|
|
|
#define TG3_TX_RING_SIZE 512
|
|
#define TG3_DEF_TX_RING_PENDING (TG3_TX_RING_SIZE - 1)
|
|
|
|
#define TG3_RX_RING_BYTES (sizeof(struct tg3_rx_buffer_desc) * \
|
|
TG3_RX_RING_SIZE)
|
|
#define TG3_RX_JUMBO_RING_BYTES (sizeof(struct tg3_rx_buffer_desc) * \
|
|
TG3_RX_JUMBO_RING_SIZE)
|
|
#define TG3_RX_RCB_RING_BYTES(tp) (sizeof(struct tg3_rx_buffer_desc) * \
|
|
TG3_RX_RCB_RING_SIZE(tp))
|
|
#define TG3_TX_RING_BYTES (sizeof(struct tg3_tx_buffer_desc) * \
|
|
TG3_TX_RING_SIZE)
|
|
#define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1))
|
|
|
|
#define RX_PKT_BUF_SZ (1536 + tp->rx_offset + 64)
|
|
#define RX_JUMBO_PKT_BUF_SZ (9046 + tp->rx_offset + 64)
|
|
|
|
/* minimum number of free TX descriptors required to wake up TX process */
|
|
#define TG3_TX_WAKEUP_THRESH(tp) ((tp)->tx_pending / 4)
|
|
|
|
#define TG3_RAW_IP_ALIGN 2
|
|
|
|
/* number of ETHTOOL_GSTATS u64's */
|
|
#define TG3_NUM_STATS (sizeof(struct tg3_ethtool_stats)/sizeof(u64))
|
|
|
|
#define TG3_NUM_TEST 6
|
|
|
|
#define FIRMWARE_TG3 "tigon/tg3.bin"
|
|
#define FIRMWARE_TG3TSO "tigon/tg3_tso.bin"
|
|
#define FIRMWARE_TG3TSO5 "tigon/tg3_tso5.bin"
|
|
|
|
static char version[] __devinitdata =
|
|
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
|
|
|
|
MODULE_AUTHOR("David S. Miller (davem@redhat.com) and Jeff Garzik (jgarzik@pobox.com)");
|
|
MODULE_DESCRIPTION("Broadcom Tigon3 ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_MODULE_VERSION);
|
|
MODULE_FIRMWARE(FIRMWARE_TG3);
|
|
MODULE_FIRMWARE(FIRMWARE_TG3TSO);
|
|
MODULE_FIRMWARE(FIRMWARE_TG3TSO5);
|
|
|
|
|
|
static int tg3_debug = -1; /* -1 == use TG3_DEF_MSG_ENABLE as value */
|
|
module_param(tg3_debug, int, 0);
|
|
MODULE_PARM_DESC(tg3_debug, "Tigon3 bitmapped debugging message enable value");
|
|
|
|
static struct pci_device_id tg3_pci_tbl[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5700)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5701)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5702)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5703)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5704)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5702FE)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705_2)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705M_2)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5702X)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5703X)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5704S)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5702A3)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5703A3)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5782)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5788)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5789)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5901)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5901_2)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5704S_2)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5720)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753F)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5754)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5754M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5755)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5755M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5756)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5786)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5787)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5787M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5787F)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5714)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5714S)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5715)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5715S)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5781)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5906)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5906M)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5784)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5764)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5723)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5761)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5761E)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5761S)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5761SE)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5785)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57780)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57760)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57790)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57720)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1001)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1003)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC9100)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_TIGON3)},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, tg3_pci_tbl);
|
|
|
|
static const struct {
|
|
const char string[ETH_GSTRING_LEN];
|
|
} ethtool_stats_keys[TG3_NUM_STATS] = {
|
|
{ "rx_octets" },
|
|
{ "rx_fragments" },
|
|
{ "rx_ucast_packets" },
|
|
{ "rx_mcast_packets" },
|
|
{ "rx_bcast_packets" },
|
|
{ "rx_fcs_errors" },
|
|
{ "rx_align_errors" },
|
|
{ "rx_xon_pause_rcvd" },
|
|
{ "rx_xoff_pause_rcvd" },
|
|
{ "rx_mac_ctrl_rcvd" },
|
|
{ "rx_xoff_entered" },
|
|
{ "rx_frame_too_long_errors" },
|
|
{ "rx_jabbers" },
|
|
{ "rx_undersize_packets" },
|
|
{ "rx_in_length_errors" },
|
|
{ "rx_out_length_errors" },
|
|
{ "rx_64_or_less_octet_packets" },
|
|
{ "rx_65_to_127_octet_packets" },
|
|
{ "rx_128_to_255_octet_packets" },
|
|
{ "rx_256_to_511_octet_packets" },
|
|
{ "rx_512_to_1023_octet_packets" },
|
|
{ "rx_1024_to_1522_octet_packets" },
|
|
{ "rx_1523_to_2047_octet_packets" },
|
|
{ "rx_2048_to_4095_octet_packets" },
|
|
{ "rx_4096_to_8191_octet_packets" },
|
|
{ "rx_8192_to_9022_octet_packets" },
|
|
|
|
{ "tx_octets" },
|
|
{ "tx_collisions" },
|
|
|
|
{ "tx_xon_sent" },
|
|
{ "tx_xoff_sent" },
|
|
{ "tx_flow_control" },
|
|
{ "tx_mac_errors" },
|
|
{ "tx_single_collisions" },
|
|
{ "tx_mult_collisions" },
|
|
{ "tx_deferred" },
|
|
{ "tx_excessive_collisions" },
|
|
{ "tx_late_collisions" },
|
|
{ "tx_collide_2times" },
|
|
{ "tx_collide_3times" },
|
|
{ "tx_collide_4times" },
|
|
{ "tx_collide_5times" },
|
|
{ "tx_collide_6times" },
|
|
{ "tx_collide_7times" },
|
|
{ "tx_collide_8times" },
|
|
{ "tx_collide_9times" },
|
|
{ "tx_collide_10times" },
|
|
{ "tx_collide_11times" },
|
|
{ "tx_collide_12times" },
|
|
{ "tx_collide_13times" },
|
|
{ "tx_collide_14times" },
|
|
{ "tx_collide_15times" },
|
|
{ "tx_ucast_packets" },
|
|
{ "tx_mcast_packets" },
|
|
{ "tx_bcast_packets" },
|
|
{ "tx_carrier_sense_errors" },
|
|
{ "tx_discards" },
|
|
{ "tx_errors" },
|
|
|
|
{ "dma_writeq_full" },
|
|
{ "dma_write_prioq_full" },
|
|
{ "rxbds_empty" },
|
|
{ "rx_discards" },
|
|
{ "rx_errors" },
|
|
{ "rx_threshold_hit" },
|
|
|
|
{ "dma_readq_full" },
|
|
{ "dma_read_prioq_full" },
|
|
{ "tx_comp_queue_full" },
|
|
|
|
{ "ring_set_send_prod_index" },
|
|
{ "ring_status_update" },
|
|
{ "nic_irqs" },
|
|
{ "nic_avoided_irqs" },
|
|
{ "nic_tx_threshold_hit" }
|
|
};
|
|
|
|
static const struct {
|
|
const char string[ETH_GSTRING_LEN];
|
|
} ethtool_test_keys[TG3_NUM_TEST] = {
|
|
{ "nvram test (online) " },
|
|
{ "link test (online) " },
|
|
{ "register test (offline)" },
|
|
{ "memory test (offline)" },
|
|
{ "loopback test (offline)" },
|
|
{ "interrupt test (offline)" },
|
|
};
|
|
|
|
static void tg3_write32(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
writel(val, tp->regs + off);
|
|
}
|
|
|
|
static u32 tg3_read32(struct tg3 *tp, u32 off)
|
|
{
|
|
return (readl(tp->regs + off));
|
|
}
|
|
|
|
static void tg3_ape_write32(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
writel(val, tp->aperegs + off);
|
|
}
|
|
|
|
static u32 tg3_ape_read32(struct tg3 *tp, u32 off)
|
|
{
|
|
return (readl(tp->aperegs + off));
|
|
}
|
|
|
|
static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&tp->indirect_lock, flags);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
|
|
spin_unlock_irqrestore(&tp->indirect_lock, flags);
|
|
}
|
|
|
|
static void tg3_write_flush_reg32(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
writel(val, tp->regs + off);
|
|
readl(tp->regs + off);
|
|
}
|
|
|
|
static u32 tg3_read_indirect_reg32(struct tg3 *tp, u32 off)
|
|
{
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
spin_lock_irqsave(&tp->indirect_lock, flags);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
|
|
pci_read_config_dword(tp->pdev, TG3PCI_REG_DATA, &val);
|
|
spin_unlock_irqrestore(&tp->indirect_lock, flags);
|
|
return val;
|
|
}
|
|
|
|
static void tg3_write_indirect_mbox(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (off == (MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW)) {
|
|
pci_write_config_dword(tp->pdev, TG3PCI_RCV_RET_RING_CON_IDX +
|
|
TG3_64BIT_REG_LOW, val);
|
|
return;
|
|
}
|
|
if (off == (MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW)) {
|
|
pci_write_config_dword(tp->pdev, TG3PCI_STD_RING_PROD_IDX +
|
|
TG3_64BIT_REG_LOW, val);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&tp->indirect_lock, flags);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off + 0x5600);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
|
|
spin_unlock_irqrestore(&tp->indirect_lock, flags);
|
|
|
|
/* In indirect mode when disabling interrupts, we also need
|
|
* to clear the interrupt bit in the GRC local ctrl register.
|
|
*/
|
|
if ((off == (MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW)) &&
|
|
(val == 0x1)) {
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MISC_LOCAL_CTRL,
|
|
tp->grc_local_ctrl|GRC_LCLCTRL_CLEARINT);
|
|
}
|
|
}
|
|
|
|
static u32 tg3_read_indirect_mbox(struct tg3 *tp, u32 off)
|
|
{
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
spin_lock_irqsave(&tp->indirect_lock, flags);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off + 0x5600);
|
|
pci_read_config_dword(tp->pdev, TG3PCI_REG_DATA, &val);
|
|
spin_unlock_irqrestore(&tp->indirect_lock, flags);
|
|
return val;
|
|
}
|
|
|
|
/* usec_wait specifies the wait time in usec when writing to certain registers
|
|
* where it is unsafe to read back the register without some delay.
|
|
* GRC_LOCAL_CTRL is one example if the GPIOs are toggled to switch power.
|
|
* TG3PCI_CLOCK_CTRL is another example if the clock frequencies are changed.
|
|
*/
|
|
static void _tw32_flush(struct tg3 *tp, u32 off, u32 val, u32 usec_wait)
|
|
{
|
|
if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
|
|
/* Non-posted methods */
|
|
tp->write32(tp, off, val);
|
|
else {
|
|
/* Posted method */
|
|
tg3_write32(tp, off, val);
|
|
if (usec_wait)
|
|
udelay(usec_wait);
|
|
tp->read32(tp, off);
|
|
}
|
|
/* Wait again after the read for the posted method to guarantee that
|
|
* the wait time is met.
|
|
*/
|
|
if (usec_wait)
|
|
udelay(usec_wait);
|
|
}
|
|
|
|
static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
tp->write32_mbox(tp, off, val);
|
|
if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
|
|
tp->read32_mbox(tp, off);
|
|
}
|
|
|
|
static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
void __iomem *mbox = tp->regs + off;
|
|
writel(val, mbox);
|
|
if (tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG)
|
|
writel(val, mbox);
|
|
if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
|
|
readl(mbox);
|
|
}
|
|
|
|
static u32 tg3_read32_mbox_5906(struct tg3 *tp, u32 off)
|
|
{
|
|
return (readl(tp->regs + off + GRCMBOX_BASE));
|
|
}
|
|
|
|
static void tg3_write32_mbox_5906(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
writel(val, tp->regs + off + GRCMBOX_BASE);
|
|
}
|
|
|
|
#define tw32_mailbox(reg, val) tp->write32_mbox(tp, reg, val)
|
|
#define tw32_mailbox_f(reg, val) tw32_mailbox_flush(tp, (reg), (val))
|
|
#define tw32_rx_mbox(reg, val) tp->write32_rx_mbox(tp, reg, val)
|
|
#define tw32_tx_mbox(reg, val) tp->write32_tx_mbox(tp, reg, val)
|
|
#define tr32_mailbox(reg) tp->read32_mbox(tp, reg)
|
|
|
|
#define tw32(reg,val) tp->write32(tp, reg, val)
|
|
#define tw32_f(reg,val) _tw32_flush(tp,(reg),(val), 0)
|
|
#define tw32_wait_f(reg,val,us) _tw32_flush(tp,(reg),(val), (us))
|
|
#define tr32(reg) tp->read32(tp, reg)
|
|
|
|
static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) &&
|
|
(off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC))
|
|
return;
|
|
|
|
spin_lock_irqsave(&tp->indirect_lock, flags);
|
|
if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) {
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
|
|
|
|
/* Always leave this as zero. */
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
|
|
} else {
|
|
tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, off);
|
|
tw32_f(TG3PCI_MEM_WIN_DATA, val);
|
|
|
|
/* Always leave this as zero. */
|
|
tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, 0);
|
|
}
|
|
spin_unlock_irqrestore(&tp->indirect_lock, flags);
|
|
}
|
|
|
|
static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) &&
|
|
(off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC)) {
|
|
*val = 0;
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&tp->indirect_lock, flags);
|
|
if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) {
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
|
|
pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
|
|
|
|
/* Always leave this as zero. */
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
|
|
} else {
|
|
tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, off);
|
|
*val = tr32(TG3PCI_MEM_WIN_DATA);
|
|
|
|
/* Always leave this as zero. */
|
|
tw32_f(TG3PCI_MEM_WIN_BASE_ADDR, 0);
|
|
}
|
|
spin_unlock_irqrestore(&tp->indirect_lock, flags);
|
|
}
|
|
|
|
static void tg3_ape_lock_init(struct tg3 *tp)
|
|
{
|
|
int i;
|
|
|
|
/* Make sure the driver hasn't any stale locks. */
|
|
for (i = 0; i < 8; i++)
|
|
tg3_ape_write32(tp, TG3_APE_LOCK_GRANT + 4 * i,
|
|
APE_LOCK_GRANT_DRIVER);
|
|
}
|
|
|
|
static int tg3_ape_lock(struct tg3 *tp, int locknum)
|
|
{
|
|
int i, off;
|
|
int ret = 0;
|
|
u32 status;
|
|
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
|
|
return 0;
|
|
|
|
switch (locknum) {
|
|
case TG3_APE_LOCK_GRC:
|
|
case TG3_APE_LOCK_MEM:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
off = 4 * locknum;
|
|
|
|
tg3_ape_write32(tp, TG3_APE_LOCK_REQ + off, APE_LOCK_REQ_DRIVER);
|
|
|
|
/* Wait for up to 1 millisecond to acquire lock. */
|
|
for (i = 0; i < 100; i++) {
|
|
status = tg3_ape_read32(tp, TG3_APE_LOCK_GRANT + off);
|
|
if (status == APE_LOCK_GRANT_DRIVER)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (status != APE_LOCK_GRANT_DRIVER) {
|
|
/* Revoke the lock request. */
|
|
tg3_ape_write32(tp, TG3_APE_LOCK_GRANT + off,
|
|
APE_LOCK_GRANT_DRIVER);
|
|
|
|
ret = -EBUSY;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tg3_ape_unlock(struct tg3 *tp, int locknum)
|
|
{
|
|
int off;
|
|
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
|
|
return;
|
|
|
|
switch (locknum) {
|
|
case TG3_APE_LOCK_GRC:
|
|
case TG3_APE_LOCK_MEM:
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
off = 4 * locknum;
|
|
tg3_ape_write32(tp, TG3_APE_LOCK_GRANT + off, APE_LOCK_GRANT_DRIVER);
|
|
}
|
|
|
|
static void tg3_disable_ints(struct tg3 *tp)
|
|
{
|
|
tw32(TG3PCI_MISC_HOST_CTRL,
|
|
(tp->misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT));
|
|
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
|
|
}
|
|
|
|
static inline void tg3_cond_int(struct tg3 *tp)
|
|
{
|
|
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
|
|
(tp->hw_status->status & SD_STATUS_UPDATED))
|
|
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
|
|
else
|
|
tw32(HOSTCC_MODE, tp->coalesce_mode |
|
|
(HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
|
|
}
|
|
|
|
static void tg3_enable_ints(struct tg3 *tp)
|
|
{
|
|
tp->irq_sync = 0;
|
|
wmb();
|
|
|
|
tw32(TG3PCI_MISC_HOST_CTRL,
|
|
(tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
|
|
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
|
|
(tp->last_tag << 24));
|
|
if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
|
|
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
|
|
(tp->last_tag << 24));
|
|
tg3_cond_int(tp);
|
|
}
|
|
|
|
static inline unsigned int tg3_has_work(struct tg3 *tp)
|
|
{
|
|
struct tg3_hw_status *sblk = tp->hw_status;
|
|
unsigned int work_exists = 0;
|
|
|
|
/* check for phy events */
|
|
if (!(tp->tg3_flags &
|
|
(TG3_FLAG_USE_LINKCHG_REG |
|
|
TG3_FLAG_POLL_SERDES))) {
|
|
if (sblk->status & SD_STATUS_LINK_CHG)
|
|
work_exists = 1;
|
|
}
|
|
/* check for RX/TX work to do */
|
|
if (sblk->idx[0].tx_consumer != tp->tx_cons ||
|
|
sblk->idx[0].rx_producer != tp->rx_rcb_ptr)
|
|
work_exists = 1;
|
|
|
|
return work_exists;
|
|
}
|
|
|
|
/* tg3_restart_ints
|
|
* similar to tg3_enable_ints, but it accurately determines whether there
|
|
* is new work pending and can return without flushing the PIO write
|
|
* which reenables interrupts
|
|
*/
|
|
static void tg3_restart_ints(struct tg3 *tp)
|
|
{
|
|
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
|
|
tp->last_tag << 24);
|
|
mmiowb();
|
|
|
|
/* When doing tagged status, this work check is unnecessary.
|
|
* The last_tag we write above tells the chip which piece of
|
|
* work we've completed.
|
|
*/
|
|
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) &&
|
|
tg3_has_work(tp))
|
|
tw32(HOSTCC_MODE, tp->coalesce_mode |
|
|
(HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
|
|
}
|
|
|
|
static inline void tg3_netif_stop(struct tg3 *tp)
|
|
{
|
|
tp->dev->trans_start = jiffies; /* prevent tx timeout */
|
|
napi_disable(&tp->napi);
|
|
netif_tx_disable(tp->dev);
|
|
}
|
|
|
|
static inline void tg3_netif_start(struct tg3 *tp)
|
|
{
|
|
netif_wake_queue(tp->dev);
|
|
/* NOTE: unconditional netif_wake_queue is only appropriate
|
|
* so long as all callers are assured to have free tx slots
|
|
* (such as after tg3_init_hw)
|
|
*/
|
|
napi_enable(&tp->napi);
|
|
tp->hw_status->status |= SD_STATUS_UPDATED;
|
|
tg3_enable_ints(tp);
|
|
}
|
|
|
|
static void tg3_switch_clocks(struct tg3 *tp)
|
|
{
|
|
u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
|
|
u32 orig_clock_ctrl;
|
|
|
|
if ((tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
|
|
return;
|
|
|
|
orig_clock_ctrl = clock_ctrl;
|
|
clock_ctrl &= (CLOCK_CTRL_FORCE_CLKRUN |
|
|
CLOCK_CTRL_CLKRUN_OENABLE |
|
|
0x1f);
|
|
tp->pci_clock_ctrl = clock_ctrl;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
|
|
if (orig_clock_ctrl & CLOCK_CTRL_625_CORE) {
|
|
tw32_wait_f(TG3PCI_CLOCK_CTRL,
|
|
clock_ctrl | CLOCK_CTRL_625_CORE, 40);
|
|
}
|
|
} else if ((orig_clock_ctrl & CLOCK_CTRL_44MHZ_CORE) != 0) {
|
|
tw32_wait_f(TG3PCI_CLOCK_CTRL,
|
|
clock_ctrl |
|
|
(CLOCK_CTRL_44MHZ_CORE | CLOCK_CTRL_ALTCLK),
|
|
40);
|
|
tw32_wait_f(TG3PCI_CLOCK_CTRL,
|
|
clock_ctrl | (CLOCK_CTRL_ALTCLK),
|
|
40);
|
|
}
|
|
tw32_wait_f(TG3PCI_CLOCK_CTRL, clock_ctrl, 40);
|
|
}
|
|
|
|
#define PHY_BUSY_LOOPS 5000
|
|
|
|
static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
|
|
{
|
|
u32 frame_val;
|
|
unsigned int loops;
|
|
int ret;
|
|
|
|
if ((tp->mi_mode & MAC_MI_MODE_AUTO_POLL) != 0) {
|
|
tw32_f(MAC_MI_MODE,
|
|
(tp->mi_mode & ~MAC_MI_MODE_AUTO_POLL));
|
|
udelay(80);
|
|
}
|
|
|
|
*val = 0x0;
|
|
|
|
frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
|
|
MI_COM_PHY_ADDR_MASK);
|
|
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
|
|
MI_COM_REG_ADDR_MASK);
|
|
frame_val |= (MI_COM_CMD_READ | MI_COM_START);
|
|
|
|
tw32_f(MAC_MI_COM, frame_val);
|
|
|
|
loops = PHY_BUSY_LOOPS;
|
|
while (loops != 0) {
|
|
udelay(10);
|
|
frame_val = tr32(MAC_MI_COM);
|
|
|
|
if ((frame_val & MI_COM_BUSY) == 0) {
|
|
udelay(5);
|
|
frame_val = tr32(MAC_MI_COM);
|
|
break;
|
|
}
|
|
loops -= 1;
|
|
}
|
|
|
|
ret = -EBUSY;
|
|
if (loops != 0) {
|
|
*val = frame_val & MI_COM_DATA_MASK;
|
|
ret = 0;
|
|
}
|
|
|
|
if ((tp->mi_mode & MAC_MI_MODE_AUTO_POLL) != 0) {
|
|
tw32_f(MAC_MI_MODE, tp->mi_mode);
|
|
udelay(80);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
|
|
{
|
|
u32 frame_val;
|
|
unsigned int loops;
|
|
int ret;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 &&
|
|
(reg == MII_TG3_CTRL || reg == MII_TG3_AUX_CTRL))
|
|
return 0;
|
|
|
|
if ((tp->mi_mode & MAC_MI_MODE_AUTO_POLL) != 0) {
|
|
tw32_f(MAC_MI_MODE,
|
|
(tp->mi_mode & ~MAC_MI_MODE_AUTO_POLL));
|
|
udelay(80);
|
|
}
|
|
|
|
frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
|
|
MI_COM_PHY_ADDR_MASK);
|
|
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
|
|
MI_COM_REG_ADDR_MASK);
|
|
frame_val |= (val & MI_COM_DATA_MASK);
|
|
frame_val |= (MI_COM_CMD_WRITE | MI_COM_START);
|
|
|
|
tw32_f(MAC_MI_COM, frame_val);
|
|
|
|
loops = PHY_BUSY_LOOPS;
|
|
while (loops != 0) {
|
|
udelay(10);
|
|
frame_val = tr32(MAC_MI_COM);
|
|
if ((frame_val & MI_COM_BUSY) == 0) {
|
|
udelay(5);
|
|
frame_val = tr32(MAC_MI_COM);
|
|
break;
|
|
}
|
|
loops -= 1;
|
|
}
|
|
|
|
ret = -EBUSY;
|
|
if (loops != 0)
|
|
ret = 0;
|
|
|
|
if ((tp->mi_mode & MAC_MI_MODE_AUTO_POLL) != 0) {
|
|
tw32_f(MAC_MI_MODE, tp->mi_mode);
|
|
udelay(80);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tg3_bmcr_reset(struct tg3 *tp)
|
|
{
|
|
u32 phy_control;
|
|
int limit, err;
|
|
|
|
/* OK, reset it, and poll the BMCR_RESET bit until it
|
|
* clears or we time out.
|
|
*/
|
|
phy_control = BMCR_RESET;
|
|
err = tg3_writephy(tp, MII_BMCR, phy_control);
|
|
if (err != 0)
|
|
return -EBUSY;
|
|
|
|
limit = 5000;
|
|
while (limit--) {
|
|
err = tg3_readphy(tp, MII_BMCR, &phy_control);
|
|
if (err != 0)
|
|
return -EBUSY;
|
|
|
|
if ((phy_control & BMCR_RESET) == 0) {
|
|
udelay(40);
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
if (limit < 0)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg)
|
|
{
|
|
struct tg3 *tp = bp->priv;
|
|
u32 val;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
|
|
return -EAGAIN;
|
|
|
|
if (tg3_readphy(tp, reg, &val))
|
|
return -EIO;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int tg3_mdio_write(struct mii_bus *bp, int mii_id, int reg, u16 val)
|
|
{
|
|
struct tg3 *tp = bp->priv;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
|
|
return -EAGAIN;
|
|
|
|
if (tg3_writephy(tp, reg, val))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_mdio_reset(struct mii_bus *bp)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void tg3_mdio_config_5785(struct tg3 *tp)
|
|
{
|
|
u32 val;
|
|
struct phy_device *phydev;
|
|
|
|
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
|
|
switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
|
|
case TG3_PHY_ID_BCM50610:
|
|
val = MAC_PHYCFG2_50610_LED_MODES;
|
|
break;
|
|
case TG3_PHY_ID_BCMAC131:
|
|
val = MAC_PHYCFG2_AC131_LED_MODES;
|
|
break;
|
|
case TG3_PHY_ID_RTL8211C:
|
|
val = MAC_PHYCFG2_RTL8211C_LED_MODES;
|
|
break;
|
|
case TG3_PHY_ID_RTL8201E:
|
|
val = MAC_PHYCFG2_RTL8201E_LED_MODES;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
if (phydev->interface != PHY_INTERFACE_MODE_RGMII) {
|
|
tw32(MAC_PHYCFG2, val);
|
|
|
|
val = tr32(MAC_PHYCFG1);
|
|
val &= ~MAC_PHYCFG1_RGMII_INT;
|
|
tw32(MAC_PHYCFG1, val);
|
|
|
|
return;
|
|
}
|
|
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE))
|
|
val |= MAC_PHYCFG2_EMODE_MASK_MASK |
|
|
MAC_PHYCFG2_FMODE_MASK_MASK |
|
|
MAC_PHYCFG2_GMODE_MASK_MASK |
|
|
MAC_PHYCFG2_ACT_MASK_MASK |
|
|
MAC_PHYCFG2_QUAL_MASK_MASK |
|
|
MAC_PHYCFG2_INBAND_ENABLE;
|
|
|
|
tw32(MAC_PHYCFG2, val);
|
|
|
|
val = tr32(MAC_PHYCFG1) & ~(MAC_PHYCFG1_RGMII_EXT_RX_DEC |
|
|
MAC_PHYCFG1_RGMII_SND_STAT_EN);
|
|
if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE) {
|
|
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
|
|
val |= MAC_PHYCFG1_RGMII_EXT_RX_DEC;
|
|
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
|
|
val |= MAC_PHYCFG1_RGMII_SND_STAT_EN;
|
|
}
|
|
tw32(MAC_PHYCFG1, val | MAC_PHYCFG1_RGMII_INT | MAC_PHYCFG1_TXC_DRV);
|
|
|
|
val = tr32(MAC_EXT_RGMII_MODE);
|
|
val &= ~(MAC_RGMII_MODE_RX_INT_B |
|
|
MAC_RGMII_MODE_RX_QUALITY |
|
|
MAC_RGMII_MODE_RX_ACTIVITY |
|
|
MAC_RGMII_MODE_RX_ENG_DET |
|
|
MAC_RGMII_MODE_TX_ENABLE |
|
|
MAC_RGMII_MODE_TX_LOWPWR |
|
|
MAC_RGMII_MODE_TX_RESET);
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)) {
|
|
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
|
|
val |= MAC_RGMII_MODE_RX_INT_B |
|
|
MAC_RGMII_MODE_RX_QUALITY |
|
|
MAC_RGMII_MODE_RX_ACTIVITY |
|
|
MAC_RGMII_MODE_RX_ENG_DET;
|
|
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
|
|
val |= MAC_RGMII_MODE_TX_ENABLE |
|
|
MAC_RGMII_MODE_TX_LOWPWR |
|
|
MAC_RGMII_MODE_TX_RESET;
|
|
}
|
|
tw32(MAC_EXT_RGMII_MODE, val);
|
|
}
|
|
|
|
static void tg3_mdio_start(struct tg3 *tp)
|
|
{
|
|
if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
|
|
mutex_lock(&tp->mdio_bus->mdio_lock);
|
|
tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
|
|
mutex_unlock(&tp->mdio_bus->mdio_lock);
|
|
}
|
|
|
|
tp->mi_mode &= ~MAC_MI_MODE_AUTO_POLL;
|
|
tw32_f(MAC_MI_MODE, tp->mi_mode);
|
|
udelay(80);
|
|
|
|
if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
|
|
tg3_mdio_config_5785(tp);
|
|
}
|
|
|
|
static void tg3_mdio_stop(struct tg3 *tp)
|
|
{
|
|
if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
|
|
mutex_lock(&tp->mdio_bus->mdio_lock);
|
|
tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_PAUSED;
|
|
mutex_unlock(&tp->mdio_bus->mdio_lock);
|
|
}
|
|
}
|
|
|
|
static int tg3_mdio_init(struct tg3 *tp)
|
|
{
|
|
int i;
|
|
u32 reg;
|
|
struct phy_device *phydev;
|
|
|
|
tg3_mdio_start(tp);
|
|
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) ||
|
|
(tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED))
|
|
return 0;
|
|
|
|
tp->mdio_bus = mdiobus_alloc();
|
|
if (tp->mdio_bus == NULL)
|
|
return -ENOMEM;
|
|
|
|
tp->mdio_bus->name = "tg3 mdio bus";
|
|
snprintf(tp->mdio_bus->id, MII_BUS_ID_SIZE, "%x",
|
|
(tp->pdev->bus->number << 8) | tp->pdev->devfn);
|
|
tp->mdio_bus->priv = tp;
|
|
tp->mdio_bus->parent = &tp->pdev->dev;
|
|
tp->mdio_bus->read = &tg3_mdio_read;
|
|
tp->mdio_bus->write = &tg3_mdio_write;
|
|
tp->mdio_bus->reset = &tg3_mdio_reset;
|
|
tp->mdio_bus->phy_mask = ~(1 << PHY_ADDR);
|
|
tp->mdio_bus->irq = &tp->mdio_irq[0];
|
|
|
|
for (i = 0; i < PHY_MAX_ADDR; i++)
|
|
tp->mdio_bus->irq[i] = PHY_POLL;
|
|
|
|
/* The bus registration will look for all the PHYs on the mdio bus.
|
|
* Unfortunately, it does not ensure the PHY is powered up before
|
|
* accessing the PHY ID registers. A chip reset is the
|
|
* quickest way to bring the device back to an operational state..
|
|
*/
|
|
if (tg3_readphy(tp, MII_BMCR, ®) || (reg & BMCR_PDOWN))
|
|
tg3_bmcr_reset(tp);
|
|
|
|
i = mdiobus_register(tp->mdio_bus);
|
|
if (i) {
|
|
printk(KERN_WARNING "%s: mdiobus_reg failed (0x%x)\n",
|
|
tp->dev->name, i);
|
|
mdiobus_free(tp->mdio_bus);
|
|
return i;
|
|
}
|
|
|
|
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
|
|
|
|
if (!phydev || !phydev->drv) {
|
|
printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
|
|
mdiobus_unregister(tp->mdio_bus);
|
|
mdiobus_free(tp->mdio_bus);
|
|
return -ENODEV;
|
|
}
|
|
|
|
switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
|
|
case TG3_PHY_ID_BCM57780:
|
|
phydev->interface = PHY_INTERFACE_MODE_GMII;
|
|
break;
|
|
case TG3_PHY_ID_BCM50610:
|
|
if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
|
|
phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
|
|
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
|
|
phydev->dev_flags |= PHY_BRCM_EXT_IBND_RX_ENABLE;
|
|
if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_TX_EN)
|
|
phydev->dev_flags |= PHY_BRCM_EXT_IBND_TX_ENABLE;
|
|
/* fallthru */
|
|
case TG3_PHY_ID_RTL8211C:
|
|
phydev->interface = PHY_INTERFACE_MODE_RGMII;
|
|
break;
|
|
case TG3_PHY_ID_RTL8201E:
|
|
case TG3_PHY_ID_BCMAC131:
|
|
phydev->interface = PHY_INTERFACE_MODE_MII;
|
|
break;
|
|
}
|
|
|
|
tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
|
|
tg3_mdio_config_5785(tp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tg3_mdio_fini(struct tg3 *tp)
|
|
{
|
|
if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
|
|
tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED;
|
|
mdiobus_unregister(tp->mdio_bus);
|
|
mdiobus_free(tp->mdio_bus);
|
|
tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
|
|
}
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static inline void tg3_generate_fw_event(struct tg3 *tp)
|
|
{
|
|
u32 val;
|
|
|
|
val = tr32(GRC_RX_CPU_EVENT);
|
|
val |= GRC_RX_CPU_DRIVER_EVENT;
|
|
tw32_f(GRC_RX_CPU_EVENT, val);
|
|
|
|
tp->last_event_jiffies = jiffies;
|
|
}
|
|
|
|
#define TG3_FW_EVENT_TIMEOUT_USEC 2500
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_wait_for_event_ack(struct tg3 *tp)
|
|
{
|
|
int i;
|
|
unsigned int delay_cnt;
|
|
long time_remain;
|
|
|
|
/* If enough time has passed, no wait is necessary. */
|
|
time_remain = (long)(tp->last_event_jiffies + 1 +
|
|
usecs_to_jiffies(TG3_FW_EVENT_TIMEOUT_USEC)) -
|
|
(long)jiffies;
|
|
if (time_remain < 0)
|
|
return;
|
|
|
|
/* Check if we can shorten the wait time. */
|
|
delay_cnt = jiffies_to_usecs(time_remain);
|
|
if (delay_cnt > TG3_FW_EVENT_TIMEOUT_USEC)
|
|
delay_cnt = TG3_FW_EVENT_TIMEOUT_USEC;
|
|
delay_cnt = (delay_cnt >> 3) + 1;
|
|
|
|
for (i = 0; i < delay_cnt; i++) {
|
|
if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
|
|
break;
|
|
udelay(8);
|
|
}
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_ump_link_report(struct tg3 *tp)
|
|
{
|
|
u32 reg;
|
|
u32 val;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
|
|
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
|
|
return;
|
|
|
|
tg3_wait_for_event_ack(tp);
|
|
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_LINK_UPDATE);
|
|
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 14);
|
|
|
|
val = 0;
|
|
if (!tg3_readphy(tp, MII_BMCR, ®))
|
|
val = reg << 16;
|
|
if (!tg3_readphy(tp, MII_BMSR, ®))
|
|
val |= (reg & 0xffff);
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, val);
|
|
|
|
val = 0;
|
|
if (!tg3_readphy(tp, MII_ADVERTISE, ®))
|
|
val = reg << 16;
|
|
if (!tg3_readphy(tp, MII_LPA, ®))
|
|
val |= (reg & 0xffff);
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX + 4, val);
|
|
|
|
val = 0;
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_MII_SERDES)) {
|
|
if (!tg3_readphy(tp, MII_CTRL1000, ®))
|
|
val = reg << 16;
|
|
if (!tg3_readphy(tp, MII_STAT1000, ®))
|
|
val |= (reg & 0xffff);
|
|
}
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX + 8, val);
|
|
|
|
if (!tg3_readphy(tp, MII_PHYADDR, ®))
|
|
val = reg << 16;
|
|
else
|
|
val = 0;
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX + 12, val);
|
|
|
|
tg3_generate_fw_event(tp);
|
|
}
|
|
|
|
static void tg3_link_report(struct tg3 *tp)
|
|
{
|
|
if (!netif_carrier_ok(tp->dev)) {
|
|
if (netif_msg_link(tp))
|
|
printk(KERN_INFO PFX "%s: Link is down.\n",
|
|
tp->dev->name);
|
|
tg3_ump_link_report(tp);
|
|
} else if (netif_msg_link(tp)) {
|
|
printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
|
|
tp->dev->name,
|
|
(tp->link_config.active_speed == SPEED_1000 ?
|
|
1000 :
|
|
(tp->link_config.active_speed == SPEED_100 ?
|
|
100 : 10)),
|
|
(tp->link_config.active_duplex == DUPLEX_FULL ?
|
|
"full" : "half"));
|
|
|
|
printk(KERN_INFO PFX
|
|
"%s: Flow control is %s for TX and %s for RX.\n",
|
|
tp->dev->name,
|
|
(tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
|
|
"on" : "off",
|
|
(tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
|
|
"on" : "off");
|
|
tg3_ump_link_report(tp);
|
|
}
|
|
}
|
|
|
|
static u16 tg3_advert_flowctrl_1000T(u8 flow_ctrl)
|
|
{
|
|
u16 miireg;
|
|
|
|
if ((flow_ctrl & FLOW_CTRL_TX) && (flow_ctrl & FLOW_CTRL_RX))
|
|
miireg = ADVERTISE_PAUSE_CAP;
|
|
else if (flow_ctrl & FLOW_CTRL_TX)
|
|
miireg = ADVERTISE_PAUSE_ASYM;
|
|
else if (flow_ctrl & FLOW_CTRL_RX)
|
|
miireg = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
|
|
else
|
|
miireg = 0;
|
|
|
|
return miireg;
|
|
}
|
|
|
|
static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
|
|
{
|
|
u16 miireg;
|
|
|
|
if ((flow_ctrl & FLOW_CTRL_TX) && (flow_ctrl & FLOW_CTRL_RX))
|
|
miireg = ADVERTISE_1000XPAUSE;
|
|
else if (flow_ctrl & FLOW_CTRL_TX)
|
|
miireg = ADVERTISE_1000XPSE_ASYM;
|
|
else if (flow_ctrl & FLOW_CTRL_RX)
|
|
miireg = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM;
|
|
else
|
|
miireg = 0;
|
|
|
|
return miireg;
|
|
}
|
|
|
|
static u8 tg3_resolve_flowctrl_1000X(u16 lcladv, u16 rmtadv)
|
|
{
|
|
u8 cap = 0;
|
|
|
|
if (lcladv & ADVERTISE_1000XPAUSE) {
|
|
if (lcladv & ADVERTISE_1000XPSE_ASYM) {
|
|
if (rmtadv & LPA_1000XPAUSE)
|
|
cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
|
|
else if (rmtadv & LPA_1000XPAUSE_ASYM)
|
|
cap = FLOW_CTRL_RX;
|
|
} else {
|
|
if (rmtadv & LPA_1000XPAUSE)
|
|
cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
|
|
}
|
|
} else if (lcladv & ADVERTISE_1000XPSE_ASYM) {
|
|
if ((rmtadv & LPA_1000XPAUSE) && (rmtadv & LPA_1000XPAUSE_ASYM))
|
|
cap = FLOW_CTRL_TX;
|
|
}
|
|
|
|
return cap;
|
|
}
|
|
|
|
static void tg3_setup_flow_control(struct tg3 *tp, u32 lcladv, u32 rmtadv)
|
|
{
|
|
u8 autoneg;
|
|
u8 flowctrl = 0;
|
|
u32 old_rx_mode = tp->rx_mode;
|
|
u32 old_tx_mode = tp->tx_mode;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
|
|
autoneg = tp->mdio_bus->phy_map[PHY_ADDR]->autoneg;
|
|
else
|
|
autoneg = tp->link_config.autoneg;
|
|
|
|
if (autoneg == AUTONEG_ENABLE &&
|
|
(tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG)) {
|
|
if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)
|
|
flowctrl = tg3_resolve_flowctrl_1000X(lcladv, rmtadv);
|
|
else
|
|
flowctrl = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
|
|
} else
|
|
flowctrl = tp->link_config.flowctrl;
|
|
|
|
tp->link_config.active_flowctrl = flowctrl;
|
|
|
|
if (flowctrl & FLOW_CTRL_RX)
|
|
tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;
|
|
else
|
|
tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
|
|
|
|
if (old_rx_mode != tp->rx_mode)
|
|
tw32_f(MAC_RX_MODE, tp->rx_mode);
|
|
|
|
if (flowctrl & FLOW_CTRL_TX)
|
|
tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;
|
|
else
|
|
tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
|
|
|
|
if (old_tx_mode != tp->tx_mode)
|
|
tw32_f(MAC_TX_MODE, tp->tx_mode);
|
|
}
|
|
|
|
static void tg3_adjust_link(struct net_device *dev)
|
|
{
|
|
u8 oldflowctrl, linkmesg = 0;
|
|
u32 mac_mode, lcl_adv, rmt_adv;
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR];
|
|
|
|
spin_lock(&tp->lock);
|
|
|
|
mac_mode = tp->mac_mode & ~(MAC_MODE_PORT_MODE_MASK |
|
|
MAC_MODE_HALF_DUPLEX);
|
|
|
|
oldflowctrl = tp->link_config.active_flowctrl;
|
|
|
|
if (phydev->link) {
|
|
lcl_adv = 0;
|
|
rmt_adv = 0;
|
|
|
|
if (phydev->speed == SPEED_100 || phydev->speed == SPEED_10)
|
|
mac_mode |= MAC_MODE_PORT_MODE_MII;
|
|
else
|
|
mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
|
|
|
if (phydev->duplex == DUPLEX_HALF)
|
|
mac_mode |= MAC_MODE_HALF_DUPLEX;
|
|
else {
|
|
lcl_adv = tg3_advert_flowctrl_1000T(
|
|
tp->link_config.flowctrl);
|
|
|
|
if (phydev->pause)
|
|
rmt_adv = LPA_PAUSE_CAP;
|
|
if (phydev->asym_pause)
|
|
rmt_adv |= LPA_PAUSE_ASYM;
|
|
}
|
|
|
|
tg3_setup_flow_control(tp, lcl_adv, rmt_adv);
|
|
} else
|
|
mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
|
|
|
if (mac_mode != tp->mac_mode) {
|
|
tp->mac_mode = mac_mode;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
|
|
if (phydev->speed == SPEED_10)
|
|
tw32(MAC_MI_STAT,
|
|
MAC_MI_STAT_10MBPS_MODE |
|
|
MAC_MI_STAT_LNKSTAT_ATTN_ENAB);
|
|
else
|
|
tw32(MAC_MI_STAT, MAC_MI_STAT_LNKSTAT_ATTN_ENAB);
|
|
}
|
|
|
|
if (phydev->speed == SPEED_1000 && phydev->duplex == DUPLEX_HALF)
|
|
tw32(MAC_TX_LENGTHS,
|
|
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
|
|
(6 << TX_LENGTHS_IPG_SHIFT) |
|
|
(0xff << TX_LENGTHS_SLOT_TIME_SHIFT)));
|
|
else
|
|
tw32(MAC_TX_LENGTHS,
|
|
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
|
|
(6 << TX_LENGTHS_IPG_SHIFT) |
|
|
(32 << TX_LENGTHS_SLOT_TIME_SHIFT)));
|
|
|
|
if ((phydev->link && tp->link_config.active_speed == SPEED_INVALID) ||
|
|
(!phydev->link && tp->link_config.active_speed != SPEED_INVALID) ||
|
|
phydev->speed != tp->link_config.active_speed ||
|
|
phydev->duplex != tp->link_config.active_duplex ||
|
|
oldflowctrl != tp->link_config.active_flowctrl)
|
|
linkmesg = 1;
|
|
|
|
tp->link_config.active_speed = phydev->speed;
|
|
tp->link_config.active_duplex = phydev->duplex;
|
|
|
|
spin_unlock(&tp->lock);
|
|
|
|
if (linkmesg)
|
|
tg3_link_report(tp);
|
|
}
|
|
|
|
static int tg3_phy_init(struct tg3 *tp)
|
|
{
|
|
struct phy_device *phydev;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)
|
|
return 0;
|
|
|
|
/* Bring the PHY back to a known state. */
|
|
tg3_bmcr_reset(tp);
|
|
|
|
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
|
|
|
|
/* Attach the MAC to the PHY. */
|
|
phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
|
|
phydev->dev_flags, phydev->interface);
|
|
if (IS_ERR(phydev)) {
|
|
printk(KERN_ERR "%s: Could not attach to PHY\n", tp->dev->name);
|
|
return PTR_ERR(phydev);
|
|
}
|
|
|
|
/* Mask with MAC supported features. */
|
|
switch (phydev->interface) {
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY)) {
|
|
phydev->supported &= (PHY_GBIT_FEATURES |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
}
|
|
/* fallthru */
|
|
case PHY_INTERFACE_MODE_MII:
|
|
phydev->supported &= (PHY_BASIC_FEATURES |
|
|
SUPPORTED_Pause |
|
|
SUPPORTED_Asym_Pause);
|
|
break;
|
|
default:
|
|
phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
tp->tg3_flags3 |= TG3_FLG3_PHY_CONNECTED;
|
|
|
|
phydev->advertising = phydev->supported;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tg3_phy_start(struct tg3 *tp)
|
|
{
|
|
struct phy_device *phydev;
|
|
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
|
|
return;
|
|
|
|
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
|
|
|
|
if (tp->link_config.phy_is_low_power) {
|
|
tp->link_config.phy_is_low_power = 0;
|
|
phydev->speed = tp->link_config.orig_speed;
|
|
phydev->duplex = tp->link_config.orig_duplex;
|
|
phydev->autoneg = tp->link_config.orig_autoneg;
|
|
phydev->advertising = tp->link_config.orig_advertising;
|
|
}
|
|
|
|
phy_start(phydev);
|
|
|
|
phy_start_aneg(phydev);
|
|
}
|
|
|
|
static void tg3_phy_stop(struct tg3 *tp)
|
|
{
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
|
|
return;
|
|
|
|
phy_stop(tp->mdio_bus->phy_map[PHY_ADDR]);
|
|
}
|
|
|
|
static void tg3_phy_fini(struct tg3 *tp)
|
|
{
|
|
if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
|
|
phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]);
|
|
tp->tg3_flags3 &= ~TG3_FLG3_PHY_CONNECTED;
|
|
}
|
|
}
|
|
|
|
static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
|
|
{
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
|
|
}
|
|
|
|
static void tg3_phy_toggle_apd(struct tg3 *tp, bool enable)
|
|
{
|
|
u32 reg;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
|
|
return;
|
|
|
|
reg = MII_TG3_MISC_SHDW_WREN |
|
|
MII_TG3_MISC_SHDW_SCR5_SEL |
|
|
MII_TG3_MISC_SHDW_SCR5_LPED |
|
|
MII_TG3_MISC_SHDW_SCR5_DLPTLM |
|
|
MII_TG3_MISC_SHDW_SCR5_SDTL |
|
|
MII_TG3_MISC_SHDW_SCR5_C125OE;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 || !enable)
|
|
reg |= MII_TG3_MISC_SHDW_SCR5_DLLAPD;
|
|
|
|
tg3_writephy(tp, MII_TG3_MISC_SHDW, reg);
|
|
|
|
|
|
reg = MII_TG3_MISC_SHDW_WREN |
|
|
MII_TG3_MISC_SHDW_APD_SEL |
|
|
MII_TG3_MISC_SHDW_APD_WKTM_84MS;
|
|
if (enable)
|
|
reg |= MII_TG3_MISC_SHDW_APD_ENABLE;
|
|
|
|
tg3_writephy(tp, MII_TG3_MISC_SHDW, reg);
|
|
}
|
|
|
|
static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
|
|
{
|
|
u32 phy;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
|
|
return;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
u32 ephy;
|
|
|
|
if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &ephy)) {
|
|
tg3_writephy(tp, MII_TG3_EPHY_TEST,
|
|
ephy | MII_TG3_EPHY_SHADOW_EN);
|
|
if (!tg3_readphy(tp, MII_TG3_EPHYTST_MISCCTRL, &phy)) {
|
|
if (enable)
|
|
phy |= MII_TG3_EPHYTST_MISCCTRL_MDIX;
|
|
else
|
|
phy &= ~MII_TG3_EPHYTST_MISCCTRL_MDIX;
|
|
tg3_writephy(tp, MII_TG3_EPHYTST_MISCCTRL, phy);
|
|
}
|
|
tg3_writephy(tp, MII_TG3_EPHY_TEST, ephy);
|
|
}
|
|
} else {
|
|
phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
|
|
MII_TG3_AUXCTL_SHDWSEL_MISC;
|
|
if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, phy) &&
|
|
!tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy)) {
|
|
if (enable)
|
|
phy |= MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
|
|
else
|
|
phy &= ~MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
|
|
phy |= MII_TG3_AUXCTL_MISC_WREN;
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void tg3_phy_set_wirespeed(struct tg3 *tp)
|
|
{
|
|
u32 val;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED)
|
|
return;
|
|
|
|
if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x7007) &&
|
|
!tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL,
|
|
(val | (1 << 15) | (1 << 4)));
|
|
}
|
|
|
|
static void tg3_phy_apply_otp(struct tg3 *tp)
|
|
{
|
|
u32 otp, phy;
|
|
|
|
if (!tp->phy_otp)
|
|
return;
|
|
|
|
otp = tp->phy_otp;
|
|
|
|
/* Enable SM_DSP clock and tx 6dB coding. */
|
|
phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
|
|
MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
|
|
MII_TG3_AUXCTL_ACTL_TX_6DB;
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
|
|
|
|
phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT);
|
|
phy |= MII_TG3_DSP_TAP1_AGCTGT_DFLT;
|
|
tg3_phydsp_write(tp, MII_TG3_DSP_TAP1, phy);
|
|
|
|
phy = ((otp & TG3_OTP_HPFFLTR_MASK) >> TG3_OTP_HPFFLTR_SHIFT) |
|
|
((otp & TG3_OTP_HPFOVER_MASK) >> TG3_OTP_HPFOVER_SHIFT);
|
|
tg3_phydsp_write(tp, MII_TG3_DSP_AADJ1CH0, phy);
|
|
|
|
phy = ((otp & TG3_OTP_LPFDIS_MASK) >> TG3_OTP_LPFDIS_SHIFT);
|
|
phy |= MII_TG3_DSP_AADJ1CH3_ADCCKADJ;
|
|
tg3_phydsp_write(tp, MII_TG3_DSP_AADJ1CH3, phy);
|
|
|
|
phy = ((otp & TG3_OTP_VDAC_MASK) >> TG3_OTP_VDAC_SHIFT);
|
|
tg3_phydsp_write(tp, MII_TG3_DSP_EXP75, phy);
|
|
|
|
phy = ((otp & TG3_OTP_10BTAMP_MASK) >> TG3_OTP_10BTAMP_SHIFT);
|
|
tg3_phydsp_write(tp, MII_TG3_DSP_EXP96, phy);
|
|
|
|
phy = ((otp & TG3_OTP_ROFF_MASK) >> TG3_OTP_ROFF_SHIFT) |
|
|
((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT);
|
|
tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy);
|
|
|
|
/* Turn off SM_DSP clock. */
|
|
phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
|
|
MII_TG3_AUXCTL_ACTL_TX_6DB;
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
|
|
}
|
|
|
|
static int tg3_wait_macro_done(struct tg3 *tp)
|
|
{
|
|
int limit = 100;
|
|
|
|
while (limit--) {
|
|
u32 tmp32;
|
|
|
|
if (!tg3_readphy(tp, 0x16, &tmp32)) {
|
|
if ((tmp32 & 0x1000) == 0)
|
|
break;
|
|
}
|
|
}
|
|
if (limit < 0)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_phy_write_and_check_testpat(struct tg3 *tp, int *resetp)
|
|
{
|
|
static const u32 test_pat[4][6] = {
|
|
{ 0x00005555, 0x00000005, 0x00002aaa, 0x0000000a, 0x00003456, 0x00000003 },
|
|
{ 0x00002aaa, 0x0000000a, 0x00003333, 0x00000003, 0x0000789a, 0x00000005 },
|
|
{ 0x00005a5a, 0x00000005, 0x00002a6a, 0x0000000a, 0x00001bcd, 0x00000003 },
|
|
{ 0x00002a5a, 0x0000000a, 0x000033c3, 0x00000003, 0x00002ef1, 0x00000005 }
|
|
};
|
|
int chan;
|
|
|
|
for (chan = 0; chan < 4; chan++) {
|
|
int i;
|
|
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
|
|
(chan * 0x2000) | 0x0200);
|
|
tg3_writephy(tp, 0x16, 0x0002);
|
|
|
|
for (i = 0; i < 6; i++)
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT,
|
|
test_pat[chan][i]);
|
|
|
|
tg3_writephy(tp, 0x16, 0x0202);
|
|
if (tg3_wait_macro_done(tp)) {
|
|
*resetp = 1;
|
|
return -EBUSY;
|
|
}
|
|
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
|
|
(chan * 0x2000) | 0x0200);
|
|
tg3_writephy(tp, 0x16, 0x0082);
|
|
if (tg3_wait_macro_done(tp)) {
|
|
*resetp = 1;
|
|
return -EBUSY;
|
|
}
|
|
|
|
tg3_writephy(tp, 0x16, 0x0802);
|
|
if (tg3_wait_macro_done(tp)) {
|
|
*resetp = 1;
|
|
return -EBUSY;
|
|
}
|
|
|
|
for (i = 0; i < 6; i += 2) {
|
|
u32 low, high;
|
|
|
|
if (tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &low) ||
|
|
tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &high) ||
|
|
tg3_wait_macro_done(tp)) {
|
|
*resetp = 1;
|
|
return -EBUSY;
|
|
}
|
|
low &= 0x7fff;
|
|
high &= 0x000f;
|
|
if (low != test_pat[chan][i] ||
|
|
high != test_pat[chan][i+1]) {
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000b);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x4001);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x4005);
|
|
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_phy_reset_chanpat(struct tg3 *tp)
|
|
{
|
|
int chan;
|
|
|
|
for (chan = 0; chan < 4; chan++) {
|
|
int i;
|
|
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
|
|
(chan * 0x2000) | 0x0200);
|
|
tg3_writephy(tp, 0x16, 0x0002);
|
|
for (i = 0; i < 6; i++)
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x000);
|
|
tg3_writephy(tp, 0x16, 0x0202);
|
|
if (tg3_wait_macro_done(tp))
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
|
|
{
|
|
u32 reg32, phy9_orig;
|
|
int retries, do_phy_reset, err;
|
|
|
|
retries = 10;
|
|
do_phy_reset = 1;
|
|
do {
|
|
if (do_phy_reset) {
|
|
err = tg3_bmcr_reset(tp);
|
|
if (err)
|
|
return err;
|
|
do_phy_reset = 0;
|
|
}
|
|
|
|
/* Disable transmitter and interrupt. */
|
|
if (tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32))
|
|
continue;
|
|
|
|
reg32 |= 0x3000;
|
|
tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
|
|
|
|
/* Set full-duplex, 1000 mbps. */
|
|
tg3_writephy(tp, MII_BMCR,
|
|
BMCR_FULLDPLX | TG3_BMCR_SPEED1000);
|
|
|
|
/* Set to master mode. */
|
|
if (tg3_readphy(tp, MII_TG3_CTRL, &phy9_orig))
|
|
continue;
|
|
|
|
tg3_writephy(tp, MII_TG3_CTRL,
|
|
(MII_TG3_CTRL_AS_MASTER |
|
|
MII_TG3_CTRL_ENABLE_AS_MASTER));
|
|
|
|
/* Enable SM_DSP_CLOCK and 6dB. */
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
|
|
|
|
/* Block the PHY control access. */
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8005);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0800);
|
|
|
|
err = tg3_phy_write_and_check_testpat(tp, &do_phy_reset);
|
|
if (!err)
|
|
break;
|
|
} while (--retries);
|
|
|
|
err = tg3_phy_reset_chanpat(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8005);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0000);
|
|
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200);
|
|
tg3_writephy(tp, 0x16, 0x0000);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
|
|
/* Set Extended packet length bit for jumbo frames */
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4400);
|
|
}
|
|
else {
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
|
|
}
|
|
|
|
tg3_writephy(tp, MII_TG3_CTRL, phy9_orig);
|
|
|
|
if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32)) {
|
|
reg32 &= ~0x3000;
|
|
tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
|
|
} else if (!err)
|
|
err = -EBUSY;
|
|
|
|
return err;
|
|
}
|
|
|
|
/* This will reset the tigon3 PHY if there is no valid
|
|
* link unless the FORCE argument is non-zero.
|
|
*/
|
|
static int tg3_phy_reset(struct tg3 *tp)
|
|
{
|
|
u32 cpmuctrl;
|
|
u32 phy_status;
|
|
int err;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
u32 val;
|
|
|
|
val = tr32(GRC_MISC_CFG);
|
|
tw32_f(GRC_MISC_CFG, val & ~GRC_MISC_CFG_EPHY_IDDQ);
|
|
udelay(40);
|
|
}
|
|
err = tg3_readphy(tp, MII_BMSR, &phy_status);
|
|
err |= tg3_readphy(tp, MII_BMSR, &phy_status);
|
|
if (err != 0)
|
|
return -EBUSY;
|
|
|
|
if (netif_running(tp->dev) && netif_carrier_ok(tp->dev)) {
|
|
netif_carrier_off(tp->dev);
|
|
tg3_link_report(tp);
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
|
|
err = tg3_phy_reset_5703_4_5(tp);
|
|
if (err)
|
|
return err;
|
|
goto out;
|
|
}
|
|
|
|
cpmuctrl = 0;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) {
|
|
cpmuctrl = tr32(TG3_CPMU_CTRL);
|
|
if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY)
|
|
tw32(TG3_CPMU_CTRL,
|
|
cpmuctrl & ~CPMU_CTRL_GPHY_10MB_RXONLY);
|
|
}
|
|
|
|
err = tg3_bmcr_reset(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY) {
|
|
u32 phy;
|
|
|
|
phy = MII_TG3_DSP_EXP8_AEDW | MII_TG3_DSP_EXP8_REJ2MHz;
|
|
tg3_phydsp_write(tp, MII_TG3_DSP_EXP8, phy);
|
|
|
|
tw32(TG3_CPMU_CTRL, cpmuctrl);
|
|
}
|
|
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX ||
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) {
|
|
u32 val;
|
|
|
|
val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
|
|
if ((val & CPMU_LSPD_1000MB_MACCLK_MASK) ==
|
|
CPMU_LSPD_1000MB_MACCLK_12_5) {
|
|
val &= ~CPMU_LSPD_1000MB_MACCLK_MASK;
|
|
udelay(40);
|
|
tw32_f(TG3_CPMU_LSPD_1000MB_CLK, val);
|
|
}
|
|
}
|
|
|
|
tg3_phy_apply_otp(tp);
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_PHY_ENABLE_APD)
|
|
tg3_phy_toggle_apd(tp, true);
|
|
else
|
|
tg3_phy_toggle_apd(tp, false);
|
|
|
|
out:
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_ADC_BUG) {
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x201f);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x2aaa);
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0323);
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
|
|
}
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_5704_A0_BUG) {
|
|
tg3_writephy(tp, 0x1c, 0x8d68);
|
|
tg3_writephy(tp, 0x1c, 0x8d68);
|
|
}
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_BER_BUG) {
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x310b);
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x201f);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x9506);
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x401f);
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x14e2);
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
|
|
}
|
|
else if (tp->tg3_flags2 & TG3_FLG2_PHY_JITTER_BUG) {
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
|
|
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_ADJUST_TRIM) {
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b);
|
|
tg3_writephy(tp, MII_TG3_TEST1,
|
|
MII_TG3_TEST1_TRIM_EN | 0x4);
|
|
} else
|
|
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
|
|
}
|
|
/* Set Extended packet length bit (bit 14) on all chips that */
|
|
/* support jumbo frames */
|
|
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
|
|
/* Cannot do read-modify-write on 5401 */
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
|
|
} else if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
|
|
u32 phy_reg;
|
|
|
|
/* Set bit 14 with read-modify-write to preserve other bits */
|
|
if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0007) &&
|
|
!tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy_reg))
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, phy_reg | 0x4000);
|
|
}
|
|
|
|
/* Set phy register 0x10 bit 0 to high fifo elasticity to support
|
|
* jumbo frames transmission.
|
|
*/
|
|
if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
|
|
u32 phy_reg;
|
|
|
|
if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg))
|
|
tg3_writephy(tp, MII_TG3_EXT_CTRL,
|
|
phy_reg | MII_TG3_EXT_CTRL_FIFO_ELASTIC);
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
/* adjust output voltage */
|
|
tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12);
|
|
}
|
|
|
|
tg3_phy_toggle_automdix(tp, 1);
|
|
tg3_phy_set_wirespeed(tp);
|
|
return 0;
|
|
}
|
|
|
|
static void tg3_frob_aux_power(struct tg3 *tp)
|
|
{
|
|
struct tg3 *tp_peer = tp;
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_IS_NIC) == 0)
|
|
return;
|
|
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714)) {
|
|
struct net_device *dev_peer;
|
|
|
|
dev_peer = pci_get_drvdata(tp->pdev_peer);
|
|
/* remove_one() may have been run on the peer. */
|
|
if (!dev_peer)
|
|
tp_peer = tp;
|
|
else
|
|
tp_peer = netdev_priv(dev_peer);
|
|
}
|
|
|
|
if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 ||
|
|
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0 ||
|
|
(tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 ||
|
|
(tp_peer->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
|
|
(GRC_LCLCTRL_GPIO_OE0 |
|
|
GRC_LCLCTRL_GPIO_OE1 |
|
|
GRC_LCLCTRL_GPIO_OE2 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT0 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT1),
|
|
100);
|
|
} else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||
|
|
tp->pdev->device == TG3PCI_DEVICE_TIGON3_5761S) {
|
|
/* The 5761 non-e device swaps GPIO 0 and GPIO 2. */
|
|
u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
|
|
GRC_LCLCTRL_GPIO_OE1 |
|
|
GRC_LCLCTRL_GPIO_OE2 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT0 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT1 |
|
|
tp->grc_local_ctrl;
|
|
tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
|
|
|
|
grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT2;
|
|
tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
|
|
|
|
grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT0;
|
|
tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
|
|
} else {
|
|
u32 no_gpio2;
|
|
u32 grc_local_ctrl = 0;
|
|
|
|
if (tp_peer != tp &&
|
|
(tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE) != 0)
|
|
return;
|
|
|
|
/* Workaround to prevent overdrawing Amps. */
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
|
|
ASIC_REV_5714) {
|
|
grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3;
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
|
|
grc_local_ctrl, 100);
|
|
}
|
|
|
|
/* On 5753 and variants, GPIO2 cannot be used. */
|
|
no_gpio2 = tp->nic_sram_data_cfg &
|
|
NIC_SRAM_DATA_CFG_NO_GPIO2;
|
|
|
|
grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
|
|
GRC_LCLCTRL_GPIO_OE1 |
|
|
GRC_LCLCTRL_GPIO_OE2 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT1 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT2;
|
|
if (no_gpio2) {
|
|
grc_local_ctrl &= ~(GRC_LCLCTRL_GPIO_OE2 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT2);
|
|
}
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
|
|
grc_local_ctrl, 100);
|
|
|
|
grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT0;
|
|
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
|
|
grc_local_ctrl, 100);
|
|
|
|
if (!no_gpio2) {
|
|
grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT2;
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
|
|
grc_local_ctrl, 100);
|
|
}
|
|
}
|
|
} else {
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) {
|
|
if (tp_peer != tp &&
|
|
(tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE) != 0)
|
|
return;
|
|
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
|
|
(GRC_LCLCTRL_GPIO_OE1 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT1), 100);
|
|
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
|
|
GRC_LCLCTRL_GPIO_OE1, 100);
|
|
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
|
|
(GRC_LCLCTRL_GPIO_OE1 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT1), 100);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int tg3_5700_link_polarity(struct tg3 *tp, u32 speed)
|
|
{
|
|
if (tp->led_ctrl == LED_CTRL_MODE_PHY_2)
|
|
return 1;
|
|
else if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411) {
|
|
if (speed != SPEED_10)
|
|
return 1;
|
|
} else if (speed == SPEED_10)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_setup_phy(struct tg3 *, int);
|
|
|
|
#define RESET_KIND_SHUTDOWN 0
|
|
#define RESET_KIND_INIT 1
|
|
#define RESET_KIND_SUSPEND 2
|
|
|
|
static void tg3_write_sig_post_reset(struct tg3 *, int);
|
|
static int tg3_halt_cpu(struct tg3 *, u32);
|
|
|
|
static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power)
|
|
{
|
|
u32 val;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
|
|
u32 sg_dig_ctrl = tr32(SG_DIG_CTRL);
|
|
u32 serdes_cfg = tr32(MAC_SERDES_CFG);
|
|
|
|
sg_dig_ctrl |=
|
|
SG_DIG_USING_HW_AUTONEG | SG_DIG_SOFT_RESET;
|
|
tw32(SG_DIG_CTRL, sg_dig_ctrl);
|
|
tw32(MAC_SERDES_CFG, serdes_cfg | (1 << 15));
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
tg3_bmcr_reset(tp);
|
|
val = tr32(GRC_MISC_CFG);
|
|
tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ);
|
|
udelay(40);
|
|
return;
|
|
} else if (do_low_power) {
|
|
tg3_writephy(tp, MII_TG3_EXT_CTRL,
|
|
MII_TG3_EXT_CTRL_FORCE_LED_OFF);
|
|
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL,
|
|
MII_TG3_AUXCTL_SHDWSEL_PWRCTL |
|
|
MII_TG3_AUXCTL_PCTL_100TX_LPWR |
|
|
MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |
|
|
MII_TG3_AUXCTL_PCTL_VREG_11V);
|
|
}
|
|
|
|
/* The PHY should not be powered down on some chips because
|
|
* of bugs.
|
|
*/
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 &&
|
|
(tp->tg3_flags2 & TG3_FLG2_MII_SERDES)))
|
|
return;
|
|
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX ||
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX) {
|
|
val = tr32(TG3_CPMU_LSPD_1000MB_CLK);
|
|
val &= ~CPMU_LSPD_1000MB_MACCLK_MASK;
|
|
val |= CPMU_LSPD_1000MB_MACCLK_12_5;
|
|
tw32_f(TG3_CPMU_LSPD_1000MB_CLK, val);
|
|
}
|
|
|
|
tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_nvram_lock(struct tg3 *tp)
|
|
{
|
|
if (tp->tg3_flags & TG3_FLAG_NVRAM) {
|
|
int i;
|
|
|
|
if (tp->nvram_lock_cnt == 0) {
|
|
tw32(NVRAM_SWARB, SWARB_REQ_SET1);
|
|
for (i = 0; i < 8000; i++) {
|
|
if (tr32(NVRAM_SWARB) & SWARB_GNT1)
|
|
break;
|
|
udelay(20);
|
|
}
|
|
if (i == 8000) {
|
|
tw32(NVRAM_SWARB, SWARB_REQ_CLR1);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
tp->nvram_lock_cnt++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_nvram_unlock(struct tg3 *tp)
|
|
{
|
|
if (tp->tg3_flags & TG3_FLAG_NVRAM) {
|
|
if (tp->nvram_lock_cnt > 0)
|
|
tp->nvram_lock_cnt--;
|
|
if (tp->nvram_lock_cnt == 0)
|
|
tw32_f(NVRAM_SWARB, SWARB_REQ_CLR1);
|
|
}
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_enable_nvram_access(struct tg3 *tp)
|
|
{
|
|
if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PROTECTED_NVRAM)) {
|
|
u32 nvaccess = tr32(NVRAM_ACCESS);
|
|
|
|
tw32(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
|
|
}
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_disable_nvram_access(struct tg3 *tp)
|
|
{
|
|
if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PROTECTED_NVRAM)) {
|
|
u32 nvaccess = tr32(NVRAM_ACCESS);
|
|
|
|
tw32(NVRAM_ACCESS, nvaccess & ~ACCESS_ENABLE);
|
|
}
|
|
}
|
|
|
|
static int tg3_nvram_read_using_eeprom(struct tg3 *tp,
|
|
u32 offset, u32 *val)
|
|
{
|
|
u32 tmp;
|
|
int i;
|
|
|
|
if (offset > EEPROM_ADDR_ADDR_MASK || (offset % 4) != 0)
|
|
return -EINVAL;
|
|
|
|
tmp = tr32(GRC_EEPROM_ADDR) & ~(EEPROM_ADDR_ADDR_MASK |
|
|
EEPROM_ADDR_DEVID_MASK |
|
|
EEPROM_ADDR_READ);
|
|
tw32(GRC_EEPROM_ADDR,
|
|
tmp |
|
|
(0 << EEPROM_ADDR_DEVID_SHIFT) |
|
|
((offset << EEPROM_ADDR_ADDR_SHIFT) &
|
|
EEPROM_ADDR_ADDR_MASK) |
|
|
EEPROM_ADDR_READ | EEPROM_ADDR_START);
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
tmp = tr32(GRC_EEPROM_ADDR);
|
|
|
|
if (tmp & EEPROM_ADDR_COMPLETE)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
if (!(tmp & EEPROM_ADDR_COMPLETE))
|
|
return -EBUSY;
|
|
|
|
tmp = tr32(GRC_EEPROM_DATA);
|
|
|
|
/*
|
|
* The data will always be opposite the native endian
|
|
* format. Perform a blind byteswap to compensate.
|
|
*/
|
|
*val = swab32(tmp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define NVRAM_CMD_TIMEOUT 10000
|
|
|
|
static int tg3_nvram_exec_cmd(struct tg3 *tp, u32 nvram_cmd)
|
|
{
|
|
int i;
|
|
|
|
tw32(NVRAM_CMD, nvram_cmd);
|
|
for (i = 0; i < NVRAM_CMD_TIMEOUT; i++) {
|
|
udelay(10);
|
|
if (tr32(NVRAM_CMD) & NVRAM_CMD_DONE) {
|
|
udelay(10);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == NVRAM_CMD_TIMEOUT)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 tg3_nvram_phys_addr(struct tg3 *tp, u32 addr)
|
|
{
|
|
if ((tp->tg3_flags & TG3_FLAG_NVRAM) &&
|
|
(tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
|
|
(tp->tg3_flags2 & TG3_FLG2_FLASH) &&
|
|
!(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM_ADDR_TRANS) &&
|
|
(tp->nvram_jedecnum == JEDEC_ATMEL))
|
|
|
|
addr = ((addr / tp->nvram_pagesize) <<
|
|
ATMEL_AT45DB0X1B_PAGE_POS) +
|
|
(addr % tp->nvram_pagesize);
|
|
|
|
return addr;
|
|
}
|
|
|
|
static u32 tg3_nvram_logical_addr(struct tg3 *tp, u32 addr)
|
|
{
|
|
if ((tp->tg3_flags & TG3_FLAG_NVRAM) &&
|
|
(tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) &&
|
|
(tp->tg3_flags2 & TG3_FLG2_FLASH) &&
|
|
!(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM_ADDR_TRANS) &&
|
|
(tp->nvram_jedecnum == JEDEC_ATMEL))
|
|
|
|
addr = ((addr >> ATMEL_AT45DB0X1B_PAGE_POS) *
|
|
tp->nvram_pagesize) +
|
|
(addr & ((1 << ATMEL_AT45DB0X1B_PAGE_POS) - 1));
|
|
|
|
return addr;
|
|
}
|
|
|
|
/* NOTE: Data read in from NVRAM is byteswapped according to
|
|
* the byteswapping settings for all other register accesses.
|
|
* tg3 devices are BE devices, so on a BE machine, the data
|
|
* returned will be exactly as it is seen in NVRAM. On a LE
|
|
* machine, the 32-bit value will be byteswapped.
|
|
*/
|
|
static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
|
|
{
|
|
int ret;
|
|
|
|
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
|
|
return tg3_nvram_read_using_eeprom(tp, offset, val);
|
|
|
|
offset = tg3_nvram_phys_addr(tp, offset);
|
|
|
|
if (offset > NVRAM_ADDR_MSK)
|
|
return -EINVAL;
|
|
|
|
ret = tg3_nvram_lock(tp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tg3_enable_nvram_access(tp);
|
|
|
|
tw32(NVRAM_ADDR, offset);
|
|
ret = tg3_nvram_exec_cmd(tp, NVRAM_CMD_RD | NVRAM_CMD_GO |
|
|
NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
|
|
|
|
if (ret == 0)
|
|
*val = tr32(NVRAM_RDDATA);
|
|
|
|
tg3_disable_nvram_access(tp);
|
|
|
|
tg3_nvram_unlock(tp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Ensures NVRAM data is in bytestream format. */
|
|
static int tg3_nvram_read_be32(struct tg3 *tp, u32 offset, __be32 *val)
|
|
{
|
|
u32 v;
|
|
int res = tg3_nvram_read(tp, offset, &v);
|
|
if (!res)
|
|
*val = cpu_to_be32(v);
|
|
return res;
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)
|
|
{
|
|
u32 addr_high, addr_low;
|
|
int i;
|
|
|
|
addr_high = ((tp->dev->dev_addr[0] << 8) |
|
|
tp->dev->dev_addr[1]);
|
|
addr_low = ((tp->dev->dev_addr[2] << 24) |
|
|
(tp->dev->dev_addr[3] << 16) |
|
|
(tp->dev->dev_addr[4] << 8) |
|
|
(tp->dev->dev_addr[5] << 0));
|
|
for (i = 0; i < 4; i++) {
|
|
if (i == 1 && skip_mac_1)
|
|
continue;
|
|
tw32(MAC_ADDR_0_HIGH + (i * 8), addr_high);
|
|
tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
|
|
for (i = 0; i < 12; i++) {
|
|
tw32(MAC_EXTADDR_0_HIGH + (i * 8), addr_high);
|
|
tw32(MAC_EXTADDR_0_LOW + (i * 8), addr_low);
|
|
}
|
|
}
|
|
|
|
addr_high = (tp->dev->dev_addr[0] +
|
|
tp->dev->dev_addr[1] +
|
|
tp->dev->dev_addr[2] +
|
|
tp->dev->dev_addr[3] +
|
|
tp->dev->dev_addr[4] +
|
|
tp->dev->dev_addr[5]) &
|
|
TX_BACKOFF_SEED_MASK;
|
|
tw32(MAC_TX_BACKOFF_SEED, addr_high);
|
|
}
|
|
|
|
static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
|
|
{
|
|
u32 misc_host_ctrl;
|
|
bool device_should_wake, do_low_power;
|
|
|
|
/* Make sure register accesses (indirect or otherwise)
|
|
* will function correctly.
|
|
*/
|
|
pci_write_config_dword(tp->pdev,
|
|
TG3PCI_MISC_HOST_CTRL,
|
|
tp->misc_host_ctrl);
|
|
|
|
switch (state) {
|
|
case PCI_D0:
|
|
pci_enable_wake(tp->pdev, state, false);
|
|
pci_set_power_state(tp->pdev, PCI_D0);
|
|
|
|
/* Switch out of Vaux if it is a NIC */
|
|
if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
|
|
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100);
|
|
|
|
return 0;
|
|
|
|
case PCI_D1:
|
|
case PCI_D2:
|
|
case PCI_D3hot:
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n",
|
|
tp->dev->name, state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Restore the CLKREQ setting. */
|
|
if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG) {
|
|
u16 lnkctl;
|
|
|
|
pci_read_config_word(tp->pdev,
|
|
tp->pcie_cap + PCI_EXP_LNKCTL,
|
|
&lnkctl);
|
|
lnkctl |= PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
pci_write_config_word(tp->pdev,
|
|
tp->pcie_cap + PCI_EXP_LNKCTL,
|
|
lnkctl);
|
|
}
|
|
|
|
misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL);
|
|
tw32(TG3PCI_MISC_HOST_CTRL,
|
|
misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
|
|
|
|
device_should_wake = pci_pme_capable(tp->pdev, state) &&
|
|
device_may_wakeup(&tp->pdev->dev) &&
|
|
(tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
|
|
do_low_power = false;
|
|
if ((tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) &&
|
|
!tp->link_config.phy_is_low_power) {
|
|
struct phy_device *phydev;
|
|
u32 phyid, advertising;
|
|
|
|
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
|
|
|
|
tp->link_config.phy_is_low_power = 1;
|
|
|
|
tp->link_config.orig_speed = phydev->speed;
|
|
tp->link_config.orig_duplex = phydev->duplex;
|
|
tp->link_config.orig_autoneg = phydev->autoneg;
|
|
tp->link_config.orig_advertising = phydev->advertising;
|
|
|
|
advertising = ADVERTISED_TP |
|
|
ADVERTISED_Pause |
|
|
ADVERTISED_Autoneg |
|
|
ADVERTISED_10baseT_Half;
|
|
|
|
if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
|
|
device_should_wake) {
|
|
if (tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB)
|
|
advertising |=
|
|
ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_10baseT_Full;
|
|
else
|
|
advertising |= ADVERTISED_10baseT_Full;
|
|
}
|
|
|
|
phydev->advertising = advertising;
|
|
|
|
phy_start_aneg(phydev);
|
|
|
|
phyid = phydev->drv->phy_id & phydev->drv->phy_id_mask;
|
|
if (phyid != TG3_PHY_ID_BCMAC131) {
|
|
phyid &= TG3_PHY_OUI_MASK;
|
|
if (phyid == TG3_PHY_OUI_1 ||
|
|
phyid == TG3_PHY_OUI_2 ||
|
|
phyid == TG3_PHY_OUI_3)
|
|
do_low_power = true;
|
|
}
|
|
}
|
|
} else {
|
|
do_low_power = true;
|
|
|
|
if (tp->link_config.phy_is_low_power == 0) {
|
|
tp->link_config.phy_is_low_power = 1;
|
|
tp->link_config.orig_speed = tp->link_config.speed;
|
|
tp->link_config.orig_duplex = tp->link_config.duplex;
|
|
tp->link_config.orig_autoneg = tp->link_config.autoneg;
|
|
}
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
|
|
tp->link_config.speed = SPEED_10;
|
|
tp->link_config.duplex = DUPLEX_HALF;
|
|
tp->link_config.autoneg = AUTONEG_ENABLE;
|
|
tg3_setup_phy(tp, 0);
|
|
}
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
u32 val;
|
|
|
|
val = tr32(GRC_VCPU_EXT_CTRL);
|
|
tw32(GRC_VCPU_EXT_CTRL, val | GRC_VCPU_EXT_CTRL_DISABLE_WOL);
|
|
} else if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
|
|
int i;
|
|
u32 val;
|
|
|
|
for (i = 0; i < 200; i++) {
|
|
tg3_read_mem(tp, NIC_SRAM_FW_ASF_STATUS_MBOX, &val);
|
|
if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
}
|
|
if (tp->tg3_flags & TG3_FLAG_WOL_CAP)
|
|
tg3_write_mem(tp, NIC_SRAM_WOL_MBOX, WOL_SIGNATURE |
|
|
WOL_DRV_STATE_SHUTDOWN |
|
|
WOL_DRV_WOL |
|
|
WOL_SET_MAGIC_PKT);
|
|
|
|
if (device_should_wake) {
|
|
u32 mac_mode;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
|
|
if (do_low_power) {
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a);
|
|
udelay(40);
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
|
|
mac_mode = MAC_MODE_PORT_MODE_GMII;
|
|
else
|
|
mac_mode = MAC_MODE_PORT_MODE_MII;
|
|
|
|
mac_mode |= tp->mac_mode & MAC_MODE_LINK_POLARITY;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
|
|
ASIC_REV_5700) {
|
|
u32 speed = (tp->tg3_flags &
|
|
TG3_FLAG_WOL_SPEED_100MB) ?
|
|
SPEED_100 : SPEED_10;
|
|
if (tg3_5700_link_polarity(tp, speed))
|
|
mac_mode |= MAC_MODE_LINK_POLARITY;
|
|
else
|
|
mac_mode &= ~MAC_MODE_LINK_POLARITY;
|
|
}
|
|
} else {
|
|
mac_mode = MAC_MODE_PORT_MODE_TBI;
|
|
}
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
|
|
tw32(MAC_LED_CTRL, tp->led_ctrl);
|
|
|
|
mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
|
|
if (((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) &&
|
|
((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
|
|
(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)))
|
|
mac_mode |= MAC_MODE_KEEP_FRAME_IN_WOL;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
|
|
mac_mode |= tp->mac_mode &
|
|
(MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
|
|
if (mac_mode & MAC_MODE_APE_TX_EN)
|
|
mac_mode |= MAC_MODE_TDE_ENABLE;
|
|
}
|
|
|
|
tw32_f(MAC_MODE, mac_mode);
|
|
udelay(100);
|
|
|
|
tw32_f(MAC_RX_MODE, RX_MODE_ENABLE);
|
|
udelay(10);
|
|
}
|
|
|
|
if (!(tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB) &&
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
|
|
u32 base_val;
|
|
|
|
base_val = tp->pci_clock_ctrl;
|
|
base_val |= (CLOCK_CTRL_RXCLK_DISABLE |
|
|
CLOCK_CTRL_TXCLK_DISABLE);
|
|
|
|
tw32_wait_f(TG3PCI_CLOCK_CTRL, base_val | CLOCK_CTRL_ALTCLK |
|
|
CLOCK_CTRL_PWRDOWN_PLL133, 40);
|
|
} else if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
|
|
(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)) {
|
|
/* do nothing */
|
|
} else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
|
|
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) {
|
|
u32 newbits1, newbits2;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
|
|
newbits1 = (CLOCK_CTRL_RXCLK_DISABLE |
|
|
CLOCK_CTRL_TXCLK_DISABLE |
|
|
CLOCK_CTRL_ALTCLK);
|
|
newbits2 = newbits1 | CLOCK_CTRL_44MHZ_CORE;
|
|
} else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
|
|
newbits1 = CLOCK_CTRL_625_CORE;
|
|
newbits2 = newbits1 | CLOCK_CTRL_ALTCLK;
|
|
} else {
|
|
newbits1 = CLOCK_CTRL_ALTCLK;
|
|
newbits2 = newbits1 | CLOCK_CTRL_44MHZ_CORE;
|
|
}
|
|
|
|
tw32_wait_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits1,
|
|
40);
|
|
|
|
tw32_wait_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits2,
|
|
40);
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
u32 newbits3;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
|
|
newbits3 = (CLOCK_CTRL_RXCLK_DISABLE |
|
|
CLOCK_CTRL_TXCLK_DISABLE |
|
|
CLOCK_CTRL_44MHZ_CORE);
|
|
} else {
|
|
newbits3 = CLOCK_CTRL_44MHZ_CORE;
|
|
}
|
|
|
|
tw32_wait_f(TG3PCI_CLOCK_CTRL,
|
|
tp->pci_clock_ctrl | newbits3, 40);
|
|
}
|
|
}
|
|
|
|
if (!(device_should_wake) &&
|
|
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
|
|
tg3_power_down_phy(tp, do_low_power);
|
|
|
|
tg3_frob_aux_power(tp);
|
|
|
|
/* Workaround for unstable PLL clock */
|
|
if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
|
|
(GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
|
|
u32 val = tr32(0x7d00);
|
|
|
|
val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
|
|
tw32(0x7d00, val);
|
|
if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
|
|
int err;
|
|
|
|
err = tg3_nvram_lock(tp);
|
|
tg3_halt_cpu(tp, RX_CPU_BASE);
|
|
if (!err)
|
|
tg3_nvram_unlock(tp);
|
|
}
|
|
}
|
|
|
|
tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
|
|
|
|
if (device_should_wake)
|
|
pci_enable_wake(tp->pdev, state, true);
|
|
|
|
/* Finally, set the new power state. */
|
|
pci_set_power_state(tp->pdev, state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
|
|
{
|
|
switch (val & MII_TG3_AUX_STAT_SPDMASK) {
|
|
case MII_TG3_AUX_STAT_10HALF:
|
|
*speed = SPEED_10;
|
|
*duplex = DUPLEX_HALF;
|
|
break;
|
|
|
|
case MII_TG3_AUX_STAT_10FULL:
|
|
*speed = SPEED_10;
|
|
*duplex = DUPLEX_FULL;
|
|
break;
|
|
|
|
case MII_TG3_AUX_STAT_100HALF:
|
|
*speed = SPEED_100;
|
|
*duplex = DUPLEX_HALF;
|
|
break;
|
|
|
|
case MII_TG3_AUX_STAT_100FULL:
|
|
*speed = SPEED_100;
|
|
*duplex = DUPLEX_FULL;
|
|
break;
|
|
|
|
case MII_TG3_AUX_STAT_1000HALF:
|
|
*speed = SPEED_1000;
|
|
*duplex = DUPLEX_HALF;
|
|
break;
|
|
|
|
case MII_TG3_AUX_STAT_1000FULL:
|
|
*speed = SPEED_1000;
|
|
*duplex = DUPLEX_FULL;
|
|
break;
|
|
|
|
default:
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
*speed = (val & MII_TG3_AUX_STAT_100) ? SPEED_100 :
|
|
SPEED_10;
|
|
*duplex = (val & MII_TG3_AUX_STAT_FULL) ? DUPLEX_FULL :
|
|
DUPLEX_HALF;
|
|
break;
|
|
}
|
|
*speed = SPEED_INVALID;
|
|
*duplex = DUPLEX_INVALID;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void tg3_phy_copper_begin(struct tg3 *tp)
|
|
{
|
|
u32 new_adv;
|
|
int i;
|
|
|
|
if (tp->link_config.phy_is_low_power) {
|
|
/* Entering low power mode. Disable gigabit and
|
|
* 100baseT advertisements.
|
|
*/
|
|
tg3_writephy(tp, MII_TG3_CTRL, 0);
|
|
|
|
new_adv = (ADVERTISE_10HALF | ADVERTISE_10FULL |
|
|
ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
|
|
if (tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB)
|
|
new_adv |= (ADVERTISE_100HALF | ADVERTISE_100FULL);
|
|
|
|
tg3_writephy(tp, MII_ADVERTISE, new_adv);
|
|
} else if (tp->link_config.speed == SPEED_INVALID) {
|
|
if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
|
|
tp->link_config.advertising &=
|
|
~(ADVERTISED_1000baseT_Half |
|
|
ADVERTISED_1000baseT_Full);
|
|
|
|
new_adv = ADVERTISE_CSMA;
|
|
if (tp->link_config.advertising & ADVERTISED_10baseT_Half)
|
|
new_adv |= ADVERTISE_10HALF;
|
|
if (tp->link_config.advertising & ADVERTISED_10baseT_Full)
|
|
new_adv |= ADVERTISE_10FULL;
|
|
if (tp->link_config.advertising & ADVERTISED_100baseT_Half)
|
|
new_adv |= ADVERTISE_100HALF;
|
|
if (tp->link_config.advertising & ADVERTISED_100baseT_Full)
|
|
new_adv |= ADVERTISE_100FULL;
|
|
|
|
new_adv |= tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
|
|
|
|
tg3_writephy(tp, MII_ADVERTISE, new_adv);
|
|
|
|
if (tp->link_config.advertising &
|
|
(ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
|
|
new_adv = 0;
|
|
if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
|
|
new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
|
|
if (tp->link_config.advertising & ADVERTISED_1000baseT_Full)
|
|
new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
|
|
if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY) &&
|
|
(tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0))
|
|
new_adv |= (MII_TG3_CTRL_AS_MASTER |
|
|
MII_TG3_CTRL_ENABLE_AS_MASTER);
|
|
tg3_writephy(tp, MII_TG3_CTRL, new_adv);
|
|
} else {
|
|
tg3_writephy(tp, MII_TG3_CTRL, 0);
|
|
}
|
|
} else {
|
|
new_adv = tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
|
|
new_adv |= ADVERTISE_CSMA;
|
|
|
|
/* Asking for a specific link mode. */
|
|
if (tp->link_config.speed == SPEED_1000) {
|
|
tg3_writephy(tp, MII_ADVERTISE, new_adv);
|
|
|
|
if (tp->link_config.duplex == DUPLEX_FULL)
|
|
new_adv = MII_TG3_CTRL_ADV_1000_FULL;
|
|
else
|
|
new_adv = MII_TG3_CTRL_ADV_1000_HALF;
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
|
|
new_adv |= (MII_TG3_CTRL_AS_MASTER |
|
|
MII_TG3_CTRL_ENABLE_AS_MASTER);
|
|
} else {
|
|
if (tp->link_config.speed == SPEED_100) {
|
|
if (tp->link_config.duplex == DUPLEX_FULL)
|
|
new_adv |= ADVERTISE_100FULL;
|
|
else
|
|
new_adv |= ADVERTISE_100HALF;
|
|
} else {
|
|
if (tp->link_config.duplex == DUPLEX_FULL)
|
|
new_adv |= ADVERTISE_10FULL;
|
|
else
|
|
new_adv |= ADVERTISE_10HALF;
|
|
}
|
|
tg3_writephy(tp, MII_ADVERTISE, new_adv);
|
|
|
|
new_adv = 0;
|
|
}
|
|
|
|
tg3_writephy(tp, MII_TG3_CTRL, new_adv);
|
|
}
|
|
|
|
if (tp->link_config.autoneg == AUTONEG_DISABLE &&
|
|
tp->link_config.speed != SPEED_INVALID) {
|
|
u32 bmcr, orig_bmcr;
|
|
|
|
tp->link_config.active_speed = tp->link_config.speed;
|
|
tp->link_config.active_duplex = tp->link_config.duplex;
|
|
|
|
bmcr = 0;
|
|
switch (tp->link_config.speed) {
|
|
default:
|
|
case SPEED_10:
|
|
break;
|
|
|
|
case SPEED_100:
|
|
bmcr |= BMCR_SPEED100;
|
|
break;
|
|
|
|
case SPEED_1000:
|
|
bmcr |= TG3_BMCR_SPEED1000;
|
|
break;
|
|
}
|
|
|
|
if (tp->link_config.duplex == DUPLEX_FULL)
|
|
bmcr |= BMCR_FULLDPLX;
|
|
|
|
if (!tg3_readphy(tp, MII_BMCR, &orig_bmcr) &&
|
|
(bmcr != orig_bmcr)) {
|
|
tg3_writephy(tp, MII_BMCR, BMCR_LOOPBACK);
|
|
for (i = 0; i < 1500; i++) {
|
|
u32 tmp;
|
|
|
|
udelay(10);
|
|
if (tg3_readphy(tp, MII_BMSR, &tmp) ||
|
|
tg3_readphy(tp, MII_BMSR, &tmp))
|
|
continue;
|
|
if (!(tmp & BMSR_LSTATUS)) {
|
|
udelay(40);
|
|
break;
|
|
}
|
|
}
|
|
tg3_writephy(tp, MII_BMCR, bmcr);
|
|
udelay(40);
|
|
}
|
|
} else {
|
|
tg3_writephy(tp, MII_BMCR,
|
|
BMCR_ANENABLE | BMCR_ANRESTART);
|
|
}
|
|
}
|
|
|
|
static int tg3_init_5401phy_dsp(struct tg3 *tp)
|
|
{
|
|
int err;
|
|
|
|
/* Turn off tap power management. */
|
|
/* Set Extended packet length bit */
|
|
err = tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
|
|
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x0012);
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x1804);
|
|
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x0013);
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x1204);
|
|
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8006);
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0132);
|
|
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8006);
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0232);
|
|
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x201f);
|
|
err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0a20);
|
|
|
|
udelay(40);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tg3_copper_is_advertising_all(struct tg3 *tp, u32 mask)
|
|
{
|
|
u32 adv_reg, all_mask = 0;
|
|
|
|
if (mask & ADVERTISED_10baseT_Half)
|
|
all_mask |= ADVERTISE_10HALF;
|
|
if (mask & ADVERTISED_10baseT_Full)
|
|
all_mask |= ADVERTISE_10FULL;
|
|
if (mask & ADVERTISED_100baseT_Half)
|
|
all_mask |= ADVERTISE_100HALF;
|
|
if (mask & ADVERTISED_100baseT_Full)
|
|
all_mask |= ADVERTISE_100FULL;
|
|
|
|
if (tg3_readphy(tp, MII_ADVERTISE, &adv_reg))
|
|
return 0;
|
|
|
|
if ((adv_reg & all_mask) != all_mask)
|
|
return 0;
|
|
if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY)) {
|
|
u32 tg3_ctrl;
|
|
|
|
all_mask = 0;
|
|
if (mask & ADVERTISED_1000baseT_Half)
|
|
all_mask |= ADVERTISE_1000HALF;
|
|
if (mask & ADVERTISED_1000baseT_Full)
|
|
all_mask |= ADVERTISE_1000FULL;
|
|
|
|
if (tg3_readphy(tp, MII_TG3_CTRL, &tg3_ctrl))
|
|
return 0;
|
|
|
|
if ((tg3_ctrl & all_mask) != all_mask)
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int tg3_adv_1000T_flowctrl_ok(struct tg3 *tp, u32 *lcladv, u32 *rmtadv)
|
|
{
|
|
u32 curadv, reqadv;
|
|
|
|
if (tg3_readphy(tp, MII_ADVERTISE, lcladv))
|
|
return 1;
|
|
|
|
curadv = *lcladv & (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
|
|
reqadv = tg3_advert_flowctrl_1000T(tp->link_config.flowctrl);
|
|
|
|
if (tp->link_config.active_duplex == DUPLEX_FULL) {
|
|
if (curadv != reqadv)
|
|
return 0;
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG)
|
|
tg3_readphy(tp, MII_LPA, rmtadv);
|
|
} else {
|
|
/* Reprogram the advertisement register, even if it
|
|
* does not affect the current link. If the link
|
|
* gets renegotiated in the future, we can save an
|
|
* additional renegotiation cycle by advertising
|
|
* it correctly in the first place.
|
|
*/
|
|
if (curadv != reqadv) {
|
|
*lcladv &= ~(ADVERTISE_PAUSE_CAP |
|
|
ADVERTISE_PAUSE_ASYM);
|
|
tg3_writephy(tp, MII_ADVERTISE, *lcladv | reqadv);
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
|
|
{
|
|
int current_link_up;
|
|
u32 bmsr, dummy;
|
|
u32 lcl_adv, rmt_adv;
|
|
u16 current_speed;
|
|
u8 current_duplex;
|
|
int i, err;
|
|
|
|
tw32(MAC_EVENT, 0);
|
|
|
|
tw32_f(MAC_STATUS,
|
|
(MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED |
|
|
MAC_STATUS_MI_COMPLETION |
|
|
MAC_STATUS_LNKSTATE_CHANGED));
|
|
udelay(40);
|
|
|
|
if ((tp->mi_mode & MAC_MI_MODE_AUTO_POLL) != 0) {
|
|
tw32_f(MAC_MI_MODE,
|
|
(tp->mi_mode & ~MAC_MI_MODE_AUTO_POLL));
|
|
udelay(80);
|
|
}
|
|
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x02);
|
|
|
|
/* Some third-party PHYs need to be reset on link going
|
|
* down.
|
|
*/
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
|
|
netif_carrier_ok(tp->dev)) {
|
|
tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
|
|
!(bmsr & BMSR_LSTATUS))
|
|
force_reset = 1;
|
|
}
|
|
if (force_reset)
|
|
tg3_phy_reset(tp);
|
|
|
|
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
|
|
tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
if (tg3_readphy(tp, MII_BMSR, &bmsr) ||
|
|
!(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE))
|
|
bmsr = 0;
|
|
|
|
if (!(bmsr & BMSR_LSTATUS)) {
|
|
err = tg3_init_5401phy_dsp(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
for (i = 0; i < 1000; i++) {
|
|
udelay(10);
|
|
if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
|
|
(bmsr & BMSR_LSTATUS)) {
|
|
udelay(40);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((tp->phy_id & PHY_ID_REV_MASK) == PHY_REV_BCM5401_B0 &&
|
|
!(bmsr & BMSR_LSTATUS) &&
|
|
tp->link_config.active_speed == SPEED_1000) {
|
|
err = tg3_phy_reset(tp);
|
|
if (!err)
|
|
err = tg3_init_5401phy_dsp(tp);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
} else if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0) {
|
|
/* 5701 {A0,B0} CRC bug workaround */
|
|
tg3_writephy(tp, 0x15, 0x0a75);
|
|
tg3_writephy(tp, 0x1c, 0x8c68);
|
|
tg3_writephy(tp, 0x1c, 0x8d68);
|
|
tg3_writephy(tp, 0x1c, 0x8c68);
|
|
}
|
|
|
|
/* Clear pending interrupts... */
|
|
tg3_readphy(tp, MII_TG3_ISTAT, &dummy);
|
|
tg3_readphy(tp, MII_TG3_ISTAT, &dummy);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT)
|
|
tg3_writephy(tp, MII_TG3_IMASK, ~MII_TG3_INT_LINKCHG);
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
|
|
tg3_writephy(tp, MII_TG3_IMASK, ~0);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
|
|
if (tp->led_ctrl == LED_CTRL_MODE_PHY_1)
|
|
tg3_writephy(tp, MII_TG3_EXT_CTRL,
|
|
MII_TG3_EXT_CTRL_LNK3_LED_MODE);
|
|
else
|
|
tg3_writephy(tp, MII_TG3_EXT_CTRL, 0);
|
|
}
|
|
|
|
current_link_up = 0;
|
|
current_speed = SPEED_INVALID;
|
|
current_duplex = DUPLEX_INVALID;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_CAPACITIVE_COUPLING) {
|
|
u32 val;
|
|
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4007);
|
|
tg3_readphy(tp, MII_TG3_AUX_CTRL, &val);
|
|
if (!(val & (1 << 10))) {
|
|
val |= (1 << 10);
|
|
tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
|
|
goto relink;
|
|
}
|
|
}
|
|
|
|
bmsr = 0;
|
|
for (i = 0; i < 100; i++) {
|
|
tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
|
|
(bmsr & BMSR_LSTATUS))
|
|
break;
|
|
udelay(40);
|
|
}
|
|
|
|
if (bmsr & BMSR_LSTATUS) {
|
|
u32 aux_stat, bmcr;
|
|
|
|
tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat);
|
|
for (i = 0; i < 2000; i++) {
|
|
udelay(10);
|
|
if (!tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat) &&
|
|
aux_stat)
|
|
break;
|
|
}
|
|
|
|
tg3_aux_stat_to_speed_duplex(tp, aux_stat,
|
|
¤t_speed,
|
|
¤t_duplex);
|
|
|
|
bmcr = 0;
|
|
for (i = 0; i < 200; i++) {
|
|
tg3_readphy(tp, MII_BMCR, &bmcr);
|
|
if (tg3_readphy(tp, MII_BMCR, &bmcr))
|
|
continue;
|
|
if (bmcr && bmcr != 0x7fff)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
lcl_adv = 0;
|
|
rmt_adv = 0;
|
|
|
|
tp->link_config.active_speed = current_speed;
|
|
tp->link_config.active_duplex = current_duplex;
|
|
|
|
if (tp->link_config.autoneg == AUTONEG_ENABLE) {
|
|
if ((bmcr & BMCR_ANENABLE) &&
|
|
tg3_copper_is_advertising_all(tp,
|
|
tp->link_config.advertising)) {
|
|
if (tg3_adv_1000T_flowctrl_ok(tp, &lcl_adv,
|
|
&rmt_adv))
|
|
current_link_up = 1;
|
|
}
|
|
} else {
|
|
if (!(bmcr & BMCR_ANENABLE) &&
|
|
tp->link_config.speed == current_speed &&
|
|
tp->link_config.duplex == current_duplex &&
|
|
tp->link_config.flowctrl ==
|
|
tp->link_config.active_flowctrl) {
|
|
current_link_up = 1;
|
|
}
|
|
}
|
|
|
|
if (current_link_up == 1 &&
|
|
tp->link_config.active_duplex == DUPLEX_FULL)
|
|
tg3_setup_flow_control(tp, lcl_adv, rmt_adv);
|
|
}
|
|
|
|
relink:
|
|
if (current_link_up == 0 || tp->link_config.phy_is_low_power) {
|
|
u32 tmp;
|
|
|
|
tg3_phy_copper_begin(tp);
|
|
|
|
tg3_readphy(tp, MII_BMSR, &tmp);
|
|
if (!tg3_readphy(tp, MII_BMSR, &tmp) &&
|
|
(tmp & BMSR_LSTATUS))
|
|
current_link_up = 1;
|
|
}
|
|
|
|
tp->mac_mode &= ~MAC_MODE_PORT_MODE_MASK;
|
|
if (current_link_up == 1) {
|
|
if (tp->link_config.active_speed == SPEED_100 ||
|
|
tp->link_config.active_speed == SPEED_10)
|
|
tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
|
|
else
|
|
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
|
} else
|
|
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
|
|
|
tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
|
|
if (tp->link_config.active_duplex == DUPLEX_HALF)
|
|
tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
|
|
if (current_link_up == 1 &&
|
|
tg3_5700_link_polarity(tp, tp->link_config.active_speed))
|
|
tp->mac_mode |= MAC_MODE_LINK_POLARITY;
|
|
else
|
|
tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
|
|
}
|
|
|
|
/* ??? Without this setting Netgear GA302T PHY does not
|
|
* ??? send/receive packets...
|
|
*/
|
|
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411 &&
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5700_ALTIMA) {
|
|
tp->mi_mode |= MAC_MI_MODE_AUTO_POLL;
|
|
tw32_f(MAC_MI_MODE, tp->mi_mode);
|
|
udelay(80);
|
|
}
|
|
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
|
|
/* Polled via timer. */
|
|
tw32_f(MAC_EVENT, 0);
|
|
} else {
|
|
tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED);
|
|
}
|
|
udelay(40);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 &&
|
|
current_link_up == 1 &&
|
|
tp->link_config.active_speed == SPEED_1000 &&
|
|
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ||
|
|
(tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED))) {
|
|
udelay(120);
|
|
tw32_f(MAC_STATUS,
|
|
(MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED));
|
|
udelay(40);
|
|
tg3_write_mem(tp,
|
|
NIC_SRAM_FIRMWARE_MBOX,
|
|
NIC_SRAM_FIRMWARE_MBOX_MAGIC2);
|
|
}
|
|
|
|
/* Prevent send BD corruption. */
|
|
if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG) {
|
|
u16 oldlnkctl, newlnkctl;
|
|
|
|
pci_read_config_word(tp->pdev,
|
|
tp->pcie_cap + PCI_EXP_LNKCTL,
|
|
&oldlnkctl);
|
|
if (tp->link_config.active_speed == SPEED_100 ||
|
|
tp->link_config.active_speed == SPEED_10)
|
|
newlnkctl = oldlnkctl & ~PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
else
|
|
newlnkctl = oldlnkctl | PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
if (newlnkctl != oldlnkctl)
|
|
pci_write_config_word(tp->pdev,
|
|
tp->pcie_cap + PCI_EXP_LNKCTL,
|
|
newlnkctl);
|
|
}
|
|
|
|
if (current_link_up != netif_carrier_ok(tp->dev)) {
|
|
if (current_link_up)
|
|
netif_carrier_on(tp->dev);
|
|
else
|
|
netif_carrier_off(tp->dev);
|
|
tg3_link_report(tp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct tg3_fiber_aneginfo {
|
|
int state;
|
|
#define ANEG_STATE_UNKNOWN 0
|
|
#define ANEG_STATE_AN_ENABLE 1
|
|
#define ANEG_STATE_RESTART_INIT 2
|
|
#define ANEG_STATE_RESTART 3
|
|
#define ANEG_STATE_DISABLE_LINK_OK 4
|
|
#define ANEG_STATE_ABILITY_DETECT_INIT 5
|
|
#define ANEG_STATE_ABILITY_DETECT 6
|
|
#define ANEG_STATE_ACK_DETECT_INIT 7
|
|
#define ANEG_STATE_ACK_DETECT 8
|
|
#define ANEG_STATE_COMPLETE_ACK_INIT 9
|
|
#define ANEG_STATE_COMPLETE_ACK 10
|
|
#define ANEG_STATE_IDLE_DETECT_INIT 11
|
|
#define ANEG_STATE_IDLE_DETECT 12
|
|
#define ANEG_STATE_LINK_OK 13
|
|
#define ANEG_STATE_NEXT_PAGE_WAIT_INIT 14
|
|
#define ANEG_STATE_NEXT_PAGE_WAIT 15
|
|
|
|
u32 flags;
|
|
#define MR_AN_ENABLE 0x00000001
|
|
#define MR_RESTART_AN 0x00000002
|
|
#define MR_AN_COMPLETE 0x00000004
|
|
#define MR_PAGE_RX 0x00000008
|
|
#define MR_NP_LOADED 0x00000010
|
|
#define MR_TOGGLE_TX 0x00000020
|
|
#define MR_LP_ADV_FULL_DUPLEX 0x00000040
|
|
#define MR_LP_ADV_HALF_DUPLEX 0x00000080
|
|
#define MR_LP_ADV_SYM_PAUSE 0x00000100
|
|
#define MR_LP_ADV_ASYM_PAUSE 0x00000200
|
|
#define MR_LP_ADV_REMOTE_FAULT1 0x00000400
|
|
#define MR_LP_ADV_REMOTE_FAULT2 0x00000800
|
|
#define MR_LP_ADV_NEXT_PAGE 0x00001000
|
|
#define MR_TOGGLE_RX 0x00002000
|
|
#define MR_NP_RX 0x00004000
|
|
|
|
#define MR_LINK_OK 0x80000000
|
|
|
|
unsigned long link_time, cur_time;
|
|
|
|
u32 ability_match_cfg;
|
|
int ability_match_count;
|
|
|
|
char ability_match, idle_match, ack_match;
|
|
|
|
u32 txconfig, rxconfig;
|
|
#define ANEG_CFG_NP 0x00000080
|
|
#define ANEG_CFG_ACK 0x00000040
|
|
#define ANEG_CFG_RF2 0x00000020
|
|
#define ANEG_CFG_RF1 0x00000010
|
|
#define ANEG_CFG_PS2 0x00000001
|
|
#define ANEG_CFG_PS1 0x00008000
|
|
#define ANEG_CFG_HD 0x00004000
|
|
#define ANEG_CFG_FD 0x00002000
|
|
#define ANEG_CFG_INVAL 0x00001f06
|
|
|
|
};
|
|
#define ANEG_OK 0
|
|
#define ANEG_DONE 1
|
|
#define ANEG_TIMER_ENAB 2
|
|
#define ANEG_FAILED -1
|
|
|
|
#define ANEG_STATE_SETTLE_TIME 10000
|
|
|
|
static int tg3_fiber_aneg_smachine(struct tg3 *tp,
|
|
struct tg3_fiber_aneginfo *ap)
|
|
{
|
|
u16 flowctrl;
|
|
unsigned long delta;
|
|
u32 rx_cfg_reg;
|
|
int ret;
|
|
|
|
if (ap->state == ANEG_STATE_UNKNOWN) {
|
|
ap->rxconfig = 0;
|
|
ap->link_time = 0;
|
|
ap->cur_time = 0;
|
|
ap->ability_match_cfg = 0;
|
|
ap->ability_match_count = 0;
|
|
ap->ability_match = 0;
|
|
ap->idle_match = 0;
|
|
ap->ack_match = 0;
|
|
}
|
|
ap->cur_time++;
|
|
|
|
if (tr32(MAC_STATUS) & MAC_STATUS_RCVD_CFG) {
|
|
rx_cfg_reg = tr32(MAC_RX_AUTO_NEG);
|
|
|
|
if (rx_cfg_reg != ap->ability_match_cfg) {
|
|
ap->ability_match_cfg = rx_cfg_reg;
|
|
ap->ability_match = 0;
|
|
ap->ability_match_count = 0;
|
|
} else {
|
|
if (++ap->ability_match_count > 1) {
|
|
ap->ability_match = 1;
|
|
ap->ability_match_cfg = rx_cfg_reg;
|
|
}
|
|
}
|
|
if (rx_cfg_reg & ANEG_CFG_ACK)
|
|
ap->ack_match = 1;
|
|
else
|
|
ap->ack_match = 0;
|
|
|
|
ap->idle_match = 0;
|
|
} else {
|
|
ap->idle_match = 1;
|
|
ap->ability_match_cfg = 0;
|
|
ap->ability_match_count = 0;
|
|
ap->ability_match = 0;
|
|
ap->ack_match = 0;
|
|
|
|
rx_cfg_reg = 0;
|
|
}
|
|
|
|
ap->rxconfig = rx_cfg_reg;
|
|
ret = ANEG_OK;
|
|
|
|
switch(ap->state) {
|
|
case ANEG_STATE_UNKNOWN:
|
|
if (ap->flags & (MR_AN_ENABLE | MR_RESTART_AN))
|
|
ap->state = ANEG_STATE_AN_ENABLE;
|
|
|
|
/* fallthru */
|
|
case ANEG_STATE_AN_ENABLE:
|
|
ap->flags &= ~(MR_AN_COMPLETE | MR_PAGE_RX);
|
|
if (ap->flags & MR_AN_ENABLE) {
|
|
ap->link_time = 0;
|
|
ap->cur_time = 0;
|
|
ap->ability_match_cfg = 0;
|
|
ap->ability_match_count = 0;
|
|
ap->ability_match = 0;
|
|
ap->idle_match = 0;
|
|
ap->ack_match = 0;
|
|
|
|
ap->state = ANEG_STATE_RESTART_INIT;
|
|
} else {
|
|
ap->state = ANEG_STATE_DISABLE_LINK_OK;
|
|
}
|
|
break;
|
|
|
|
case ANEG_STATE_RESTART_INIT:
|
|
ap->link_time = ap->cur_time;
|
|
ap->flags &= ~(MR_NP_LOADED);
|
|
ap->txconfig = 0;
|
|
tw32(MAC_TX_AUTO_NEG, 0);
|
|
tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
ret = ANEG_TIMER_ENAB;
|
|
ap->state = ANEG_STATE_RESTART;
|
|
|
|
/* fallthru */
|
|
case ANEG_STATE_RESTART:
|
|
delta = ap->cur_time - ap->link_time;
|
|
if (delta > ANEG_STATE_SETTLE_TIME) {
|
|
ap->state = ANEG_STATE_ABILITY_DETECT_INIT;
|
|
} else {
|
|
ret = ANEG_TIMER_ENAB;
|
|
}
|
|
break;
|
|
|
|
case ANEG_STATE_DISABLE_LINK_OK:
|
|
ret = ANEG_DONE;
|
|
break;
|
|
|
|
case ANEG_STATE_ABILITY_DETECT_INIT:
|
|
ap->flags &= ~(MR_TOGGLE_TX);
|
|
ap->txconfig = ANEG_CFG_FD;
|
|
flowctrl = tg3_advert_flowctrl_1000X(tp->link_config.flowctrl);
|
|
if (flowctrl & ADVERTISE_1000XPAUSE)
|
|
ap->txconfig |= ANEG_CFG_PS1;
|
|
if (flowctrl & ADVERTISE_1000XPSE_ASYM)
|
|
ap->txconfig |= ANEG_CFG_PS2;
|
|
tw32(MAC_TX_AUTO_NEG, ap->txconfig);
|
|
tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
ap->state = ANEG_STATE_ABILITY_DETECT;
|
|
break;
|
|
|
|
case ANEG_STATE_ABILITY_DETECT:
|
|
if (ap->ability_match != 0 && ap->rxconfig != 0) {
|
|
ap->state = ANEG_STATE_ACK_DETECT_INIT;
|
|
}
|
|
break;
|
|
|
|
case ANEG_STATE_ACK_DETECT_INIT:
|
|
ap->txconfig |= ANEG_CFG_ACK;
|
|
tw32(MAC_TX_AUTO_NEG, ap->txconfig);
|
|
tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
ap->state = ANEG_STATE_ACK_DETECT;
|
|
|
|
/* fallthru */
|
|
case ANEG_STATE_ACK_DETECT:
|
|
if (ap->ack_match != 0) {
|
|
if ((ap->rxconfig & ~ANEG_CFG_ACK) ==
|
|
(ap->ability_match_cfg & ~ANEG_CFG_ACK)) {
|
|
ap->state = ANEG_STATE_COMPLETE_ACK_INIT;
|
|
} else {
|
|
ap->state = ANEG_STATE_AN_ENABLE;
|
|
}
|
|
} else if (ap->ability_match != 0 &&
|
|
ap->rxconfig == 0) {
|
|
ap->state = ANEG_STATE_AN_ENABLE;
|
|
}
|
|
break;
|
|
|
|
case ANEG_STATE_COMPLETE_ACK_INIT:
|
|
if (ap->rxconfig & ANEG_CFG_INVAL) {
|
|
ret = ANEG_FAILED;
|
|
break;
|
|
}
|
|
ap->flags &= ~(MR_LP_ADV_FULL_DUPLEX |
|
|
MR_LP_ADV_HALF_DUPLEX |
|
|
MR_LP_ADV_SYM_PAUSE |
|
|
MR_LP_ADV_ASYM_PAUSE |
|
|
MR_LP_ADV_REMOTE_FAULT1 |
|
|
MR_LP_ADV_REMOTE_FAULT2 |
|
|
MR_LP_ADV_NEXT_PAGE |
|
|
MR_TOGGLE_RX |
|
|
MR_NP_RX);
|
|
if (ap->rxconfig & ANEG_CFG_FD)
|
|
ap->flags |= MR_LP_ADV_FULL_DUPLEX;
|
|
if (ap->rxconfig & ANEG_CFG_HD)
|
|
ap->flags |= MR_LP_ADV_HALF_DUPLEX;
|
|
if (ap->rxconfig & ANEG_CFG_PS1)
|
|
ap->flags |= MR_LP_ADV_SYM_PAUSE;
|
|
if (ap->rxconfig & ANEG_CFG_PS2)
|
|
ap->flags |= MR_LP_ADV_ASYM_PAUSE;
|
|
if (ap->rxconfig & ANEG_CFG_RF1)
|
|
ap->flags |= MR_LP_ADV_REMOTE_FAULT1;
|
|
if (ap->rxconfig & ANEG_CFG_RF2)
|
|
ap->flags |= MR_LP_ADV_REMOTE_FAULT2;
|
|
if (ap->rxconfig & ANEG_CFG_NP)
|
|
ap->flags |= MR_LP_ADV_NEXT_PAGE;
|
|
|
|
ap->link_time = ap->cur_time;
|
|
|
|
ap->flags ^= (MR_TOGGLE_TX);
|
|
if (ap->rxconfig & 0x0008)
|
|
ap->flags |= MR_TOGGLE_RX;
|
|
if (ap->rxconfig & ANEG_CFG_NP)
|
|
ap->flags |= MR_NP_RX;
|
|
ap->flags |= MR_PAGE_RX;
|
|
|
|
ap->state = ANEG_STATE_COMPLETE_ACK;
|
|
ret = ANEG_TIMER_ENAB;
|
|
break;
|
|
|
|
case ANEG_STATE_COMPLETE_ACK:
|
|
if (ap->ability_match != 0 &&
|
|
ap->rxconfig == 0) {
|
|
ap->state = ANEG_STATE_AN_ENABLE;
|
|
break;
|
|
}
|
|
delta = ap->cur_time - ap->link_time;
|
|
if (delta > ANEG_STATE_SETTLE_TIME) {
|
|
if (!(ap->flags & (MR_LP_ADV_NEXT_PAGE))) {
|
|
ap->state = ANEG_STATE_IDLE_DETECT_INIT;
|
|
} else {
|
|
if ((ap->txconfig & ANEG_CFG_NP) == 0 &&
|
|
!(ap->flags & MR_NP_RX)) {
|
|
ap->state = ANEG_STATE_IDLE_DETECT_INIT;
|
|
} else {
|
|
ret = ANEG_FAILED;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ANEG_STATE_IDLE_DETECT_INIT:
|
|
ap->link_time = ap->cur_time;
|
|
tp->mac_mode &= ~MAC_MODE_SEND_CONFIGS;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
ap->state = ANEG_STATE_IDLE_DETECT;
|
|
ret = ANEG_TIMER_ENAB;
|
|
break;
|
|
|
|
case ANEG_STATE_IDLE_DETECT:
|
|
if (ap->ability_match != 0 &&
|
|
ap->rxconfig == 0) {
|
|
ap->state = ANEG_STATE_AN_ENABLE;
|
|
break;
|
|
}
|
|
delta = ap->cur_time - ap->link_time;
|
|
if (delta > ANEG_STATE_SETTLE_TIME) {
|
|
/* XXX another gem from the Broadcom driver :( */
|
|
ap->state = ANEG_STATE_LINK_OK;
|
|
}
|
|
break;
|
|
|
|
case ANEG_STATE_LINK_OK:
|
|
ap->flags |= (MR_AN_COMPLETE | MR_LINK_OK);
|
|
ret = ANEG_DONE;
|
|
break;
|
|
|
|
case ANEG_STATE_NEXT_PAGE_WAIT_INIT:
|
|
/* ??? unimplemented */
|
|
break;
|
|
|
|
case ANEG_STATE_NEXT_PAGE_WAIT:
|
|
/* ??? unimplemented */
|
|
break;
|
|
|
|
default:
|
|
ret = ANEG_FAILED;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fiber_autoneg(struct tg3 *tp, u32 *txflags, u32 *rxflags)
|
|
{
|
|
int res = 0;
|
|
struct tg3_fiber_aneginfo aninfo;
|
|
int status = ANEG_FAILED;
|
|
unsigned int tick;
|
|
u32 tmp;
|
|
|
|
tw32_f(MAC_TX_AUTO_NEG, 0);
|
|
|
|
tmp = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
|
|
tw32_f(MAC_MODE, tmp | MAC_MODE_PORT_MODE_GMII);
|
|
udelay(40);
|
|
|
|
tw32_f(MAC_MODE, tp->mac_mode | MAC_MODE_SEND_CONFIGS);
|
|
udelay(40);
|
|
|
|
memset(&aninfo, 0, sizeof(aninfo));
|
|
aninfo.flags |= MR_AN_ENABLE;
|
|
aninfo.state = ANEG_STATE_UNKNOWN;
|
|
aninfo.cur_time = 0;
|
|
tick = 0;
|
|
while (++tick < 195000) {
|
|
status = tg3_fiber_aneg_smachine(tp, &aninfo);
|
|
if (status == ANEG_DONE || status == ANEG_FAILED)
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
tp->mac_mode &= ~MAC_MODE_SEND_CONFIGS;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
*txflags = aninfo.txconfig;
|
|
*rxflags = aninfo.flags;
|
|
|
|
if (status == ANEG_DONE &&
|
|
(aninfo.flags & (MR_AN_COMPLETE | MR_LINK_OK |
|
|
MR_LP_ADV_FULL_DUPLEX)))
|
|
res = 1;
|
|
|
|
return res;
|
|
}
|
|
|
|
static void tg3_init_bcm8002(struct tg3 *tp)
|
|
{
|
|
u32 mac_status = tr32(MAC_STATUS);
|
|
int i;
|
|
|
|
/* Reset when initting first time or we have a link. */
|
|
if ((tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) &&
|
|
!(mac_status & MAC_STATUS_PCS_SYNCED))
|
|
return;
|
|
|
|
/* Set PLL lock range. */
|
|
tg3_writephy(tp, 0x16, 0x8007);
|
|
|
|
/* SW reset */
|
|
tg3_writephy(tp, MII_BMCR, BMCR_RESET);
|
|
|
|
/* Wait for reset to complete. */
|
|
/* XXX schedule_timeout() ... */
|
|
for (i = 0; i < 500; i++)
|
|
udelay(10);
|
|
|
|
/* Config mode; select PMA/Ch 1 regs. */
|
|
tg3_writephy(tp, 0x10, 0x8411);
|
|
|
|
/* Enable auto-lock and comdet, select txclk for tx. */
|
|
tg3_writephy(tp, 0x11, 0x0a10);
|
|
|
|
tg3_writephy(tp, 0x18, 0x00a0);
|
|
tg3_writephy(tp, 0x16, 0x41ff);
|
|
|
|
/* Assert and deassert POR. */
|
|
tg3_writephy(tp, 0x13, 0x0400);
|
|
udelay(40);
|
|
tg3_writephy(tp, 0x13, 0x0000);
|
|
|
|
tg3_writephy(tp, 0x11, 0x0a50);
|
|
udelay(40);
|
|
tg3_writephy(tp, 0x11, 0x0a10);
|
|
|
|
/* Wait for signal to stabilize */
|
|
/* XXX schedule_timeout() ... */
|
|
for (i = 0; i < 15000; i++)
|
|
udelay(10);
|
|
|
|
/* Deselect the channel register so we can read the PHYID
|
|
* later.
|
|
*/
|
|
tg3_writephy(tp, 0x10, 0x8011);
|
|
}
|
|
|
|
static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status)
|
|
{
|
|
u16 flowctrl;
|
|
u32 sg_dig_ctrl, sg_dig_status;
|
|
u32 serdes_cfg, expected_sg_dig_ctrl;
|
|
int workaround, port_a;
|
|
int current_link_up;
|
|
|
|
serdes_cfg = 0;
|
|
expected_sg_dig_ctrl = 0;
|
|
workaround = 0;
|
|
port_a = 1;
|
|
current_link_up = 0;
|
|
|
|
if (tp->pci_chip_rev_id != CHIPREV_ID_5704_A0 &&
|
|
tp->pci_chip_rev_id != CHIPREV_ID_5704_A1) {
|
|
workaround = 1;
|
|
if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
|
|
port_a = 0;
|
|
|
|
/* preserve bits 0-11,13,14 for signal pre-emphasis */
|
|
/* preserve bits 20-23 for voltage regulator */
|
|
serdes_cfg = tr32(MAC_SERDES_CFG) & 0x00f06fff;
|
|
}
|
|
|
|
sg_dig_ctrl = tr32(SG_DIG_CTRL);
|
|
|
|
if (tp->link_config.autoneg != AUTONEG_ENABLE) {
|
|
if (sg_dig_ctrl & SG_DIG_USING_HW_AUTONEG) {
|
|
if (workaround) {
|
|
u32 val = serdes_cfg;
|
|
|
|
if (port_a)
|
|
val |= 0xc010000;
|
|
else
|
|
val |= 0x4010000;
|
|
tw32_f(MAC_SERDES_CFG, val);
|
|
}
|
|
|
|
tw32_f(SG_DIG_CTRL, SG_DIG_COMMON_SETUP);
|
|
}
|
|
if (mac_status & MAC_STATUS_PCS_SYNCED) {
|
|
tg3_setup_flow_control(tp, 0, 0);
|
|
current_link_up = 1;
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
/* Want auto-negotiation. */
|
|
expected_sg_dig_ctrl = SG_DIG_USING_HW_AUTONEG | SG_DIG_COMMON_SETUP;
|
|
|
|
flowctrl = tg3_advert_flowctrl_1000X(tp->link_config.flowctrl);
|
|
if (flowctrl & ADVERTISE_1000XPAUSE)
|
|
expected_sg_dig_ctrl |= SG_DIG_PAUSE_CAP;
|
|
if (flowctrl & ADVERTISE_1000XPSE_ASYM)
|
|
expected_sg_dig_ctrl |= SG_DIG_ASYM_PAUSE;
|
|
|
|
if (sg_dig_ctrl != expected_sg_dig_ctrl) {
|
|
if ((tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) &&
|
|
tp->serdes_counter &&
|
|
((mac_status & (MAC_STATUS_PCS_SYNCED |
|
|
MAC_STATUS_RCVD_CFG)) ==
|
|
MAC_STATUS_PCS_SYNCED)) {
|
|
tp->serdes_counter--;
|
|
current_link_up = 1;
|
|
goto out;
|
|
}
|
|
restart_autoneg:
|
|
if (workaround)
|
|
tw32_f(MAC_SERDES_CFG, serdes_cfg | 0xc011000);
|
|
tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl | SG_DIG_SOFT_RESET);
|
|
udelay(5);
|
|
tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl);
|
|
|
|
tp->serdes_counter = SERDES_AN_TIMEOUT_5704S;
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
|
|
} else if (mac_status & (MAC_STATUS_PCS_SYNCED |
|
|
MAC_STATUS_SIGNAL_DET)) {
|
|
sg_dig_status = tr32(SG_DIG_STATUS);
|
|
mac_status = tr32(MAC_STATUS);
|
|
|
|
if ((sg_dig_status & SG_DIG_AUTONEG_COMPLETE) &&
|
|
(mac_status & MAC_STATUS_PCS_SYNCED)) {
|
|
u32 local_adv = 0, remote_adv = 0;
|
|
|
|
if (sg_dig_ctrl & SG_DIG_PAUSE_CAP)
|
|
local_adv |= ADVERTISE_1000XPAUSE;
|
|
if (sg_dig_ctrl & SG_DIG_ASYM_PAUSE)
|
|
local_adv |= ADVERTISE_1000XPSE_ASYM;
|
|
|
|
if (sg_dig_status & SG_DIG_PARTNER_PAUSE_CAPABLE)
|
|
remote_adv |= LPA_1000XPAUSE;
|
|
if (sg_dig_status & SG_DIG_PARTNER_ASYM_PAUSE)
|
|
remote_adv |= LPA_1000XPAUSE_ASYM;
|
|
|
|
tg3_setup_flow_control(tp, local_adv, remote_adv);
|
|
current_link_up = 1;
|
|
tp->serdes_counter = 0;
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
|
|
} else if (!(sg_dig_status & SG_DIG_AUTONEG_COMPLETE)) {
|
|
if (tp->serdes_counter)
|
|
tp->serdes_counter--;
|
|
else {
|
|
if (workaround) {
|
|
u32 val = serdes_cfg;
|
|
|
|
if (port_a)
|
|
val |= 0xc010000;
|
|
else
|
|
val |= 0x4010000;
|
|
|
|
tw32_f(MAC_SERDES_CFG, val);
|
|
}
|
|
|
|
tw32_f(SG_DIG_CTRL, SG_DIG_COMMON_SETUP);
|
|
udelay(40);
|
|
|
|
/* Link parallel detection - link is up */
|
|
/* only if we have PCS_SYNC and not */
|
|
/* receiving config code words */
|
|
mac_status = tr32(MAC_STATUS);
|
|
if ((mac_status & MAC_STATUS_PCS_SYNCED) &&
|
|
!(mac_status & MAC_STATUS_RCVD_CFG)) {
|
|
tg3_setup_flow_control(tp, 0, 0);
|
|
current_link_up = 1;
|
|
tp->tg3_flags2 |=
|
|
TG3_FLG2_PARALLEL_DETECT;
|
|
tp->serdes_counter =
|
|
SERDES_PARALLEL_DET_TIMEOUT;
|
|
} else
|
|
goto restart_autoneg;
|
|
}
|
|
}
|
|
} else {
|
|
tp->serdes_counter = SERDES_AN_TIMEOUT_5704S;
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
|
|
}
|
|
|
|
out:
|
|
return current_link_up;
|
|
}
|
|
|
|
static int tg3_setup_fiber_by_hand(struct tg3 *tp, u32 mac_status)
|
|
{
|
|
int current_link_up = 0;
|
|
|
|
if (!(mac_status & MAC_STATUS_PCS_SYNCED))
|
|
goto out;
|
|
|
|
if (tp->link_config.autoneg == AUTONEG_ENABLE) {
|
|
u32 txflags, rxflags;
|
|
int i;
|
|
|
|
if (fiber_autoneg(tp, &txflags, &rxflags)) {
|
|
u32 local_adv = 0, remote_adv = 0;
|
|
|
|
if (txflags & ANEG_CFG_PS1)
|
|
local_adv |= ADVERTISE_1000XPAUSE;
|
|
if (txflags & ANEG_CFG_PS2)
|
|
local_adv |= ADVERTISE_1000XPSE_ASYM;
|
|
|
|
if (rxflags & MR_LP_ADV_SYM_PAUSE)
|
|
remote_adv |= LPA_1000XPAUSE;
|
|
if (rxflags & MR_LP_ADV_ASYM_PAUSE)
|
|
remote_adv |= LPA_1000XPAUSE_ASYM;
|
|
|
|
tg3_setup_flow_control(tp, local_adv, remote_adv);
|
|
|
|
current_link_up = 1;
|
|
}
|
|
for (i = 0; i < 30; i++) {
|
|
udelay(20);
|
|
tw32_f(MAC_STATUS,
|
|
(MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED));
|
|
udelay(40);
|
|
if ((tr32(MAC_STATUS) &
|
|
(MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED)) == 0)
|
|
break;
|
|
}
|
|
|
|
mac_status = tr32(MAC_STATUS);
|
|
if (current_link_up == 0 &&
|
|
(mac_status & MAC_STATUS_PCS_SYNCED) &&
|
|
!(mac_status & MAC_STATUS_RCVD_CFG))
|
|
current_link_up = 1;
|
|
} else {
|
|
tg3_setup_flow_control(tp, 0, 0);
|
|
|
|
/* Forcing 1000FD link up. */
|
|
current_link_up = 1;
|
|
|
|
tw32_f(MAC_MODE, (tp->mac_mode | MAC_MODE_SEND_CONFIGS));
|
|
udelay(40);
|
|
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
}
|
|
|
|
out:
|
|
return current_link_up;
|
|
}
|
|
|
|
static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
|
|
{
|
|
u32 orig_pause_cfg;
|
|
u16 orig_active_speed;
|
|
u8 orig_active_duplex;
|
|
u32 mac_status;
|
|
int current_link_up;
|
|
int i;
|
|
|
|
orig_pause_cfg = tp->link_config.active_flowctrl;
|
|
orig_active_speed = tp->link_config.active_speed;
|
|
orig_active_duplex = tp->link_config.active_duplex;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_HW_AUTONEG) &&
|
|
netif_carrier_ok(tp->dev) &&
|
|
(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE)) {
|
|
mac_status = tr32(MAC_STATUS);
|
|
mac_status &= (MAC_STATUS_PCS_SYNCED |
|
|
MAC_STATUS_SIGNAL_DET |
|
|
MAC_STATUS_CFG_CHANGED |
|
|
MAC_STATUS_RCVD_CFG);
|
|
if (mac_status == (MAC_STATUS_PCS_SYNCED |
|
|
MAC_STATUS_SIGNAL_DET)) {
|
|
tw32_f(MAC_STATUS, (MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED));
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
tw32_f(MAC_TX_AUTO_NEG, 0);
|
|
|
|
tp->mac_mode &= ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
|
|
tp->mac_mode |= MAC_MODE_PORT_MODE_TBI;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
if (tp->phy_id == PHY_ID_BCM8002)
|
|
tg3_init_bcm8002(tp);
|
|
|
|
/* Enable link change event even when serdes polling. */
|
|
tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED);
|
|
udelay(40);
|
|
|
|
current_link_up = 0;
|
|
mac_status = tr32(MAC_STATUS);
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_HW_AUTONEG)
|
|
current_link_up = tg3_setup_fiber_hw_autoneg(tp, mac_status);
|
|
else
|
|
current_link_up = tg3_setup_fiber_by_hand(tp, mac_status);
|
|
|
|
tp->hw_status->status =
|
|
(SD_STATUS_UPDATED |
|
|
(tp->hw_status->status & ~SD_STATUS_LINK_CHG));
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
tw32_f(MAC_STATUS, (MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED));
|
|
udelay(5);
|
|
if ((tr32(MAC_STATUS) & (MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED |
|
|
MAC_STATUS_LNKSTATE_CHANGED)) == 0)
|
|
break;
|
|
}
|
|
|
|
mac_status = tr32(MAC_STATUS);
|
|
if ((mac_status & MAC_STATUS_PCS_SYNCED) == 0) {
|
|
current_link_up = 0;
|
|
if (tp->link_config.autoneg == AUTONEG_ENABLE &&
|
|
tp->serdes_counter == 0) {
|
|
tw32_f(MAC_MODE, (tp->mac_mode |
|
|
MAC_MODE_SEND_CONFIGS));
|
|
udelay(1);
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
}
|
|
}
|
|
|
|
if (current_link_up == 1) {
|
|
tp->link_config.active_speed = SPEED_1000;
|
|
tp->link_config.active_duplex = DUPLEX_FULL;
|
|
tw32(MAC_LED_CTRL, (tp->led_ctrl |
|
|
LED_CTRL_LNKLED_OVERRIDE |
|
|
LED_CTRL_1000MBPS_ON));
|
|
} else {
|
|
tp->link_config.active_speed = SPEED_INVALID;
|
|
tp->link_config.active_duplex = DUPLEX_INVALID;
|
|
tw32(MAC_LED_CTRL, (tp->led_ctrl |
|
|
LED_CTRL_LNKLED_OVERRIDE |
|
|
LED_CTRL_TRAFFIC_OVERRIDE));
|
|
}
|
|
|
|
if (current_link_up != netif_carrier_ok(tp->dev)) {
|
|
if (current_link_up)
|
|
netif_carrier_on(tp->dev);
|
|
else
|
|
netif_carrier_off(tp->dev);
|
|
tg3_link_report(tp);
|
|
} else {
|
|
u32 now_pause_cfg = tp->link_config.active_flowctrl;
|
|
if (orig_pause_cfg != now_pause_cfg ||
|
|
orig_active_speed != tp->link_config.active_speed ||
|
|
orig_active_duplex != tp->link_config.active_duplex)
|
|
tg3_link_report(tp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
|
|
{
|
|
int current_link_up, err = 0;
|
|
u32 bmsr, bmcr;
|
|
u16 current_speed;
|
|
u8 current_duplex;
|
|
u32 local_adv, remote_adv;
|
|
|
|
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
tw32(MAC_EVENT, 0);
|
|
|
|
tw32_f(MAC_STATUS,
|
|
(MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED |
|
|
MAC_STATUS_MI_COMPLETION |
|
|
MAC_STATUS_LNKSTATE_CHANGED));
|
|
udelay(40);
|
|
|
|
if (force_reset)
|
|
tg3_phy_reset(tp);
|
|
|
|
current_link_up = 0;
|
|
current_speed = SPEED_INVALID;
|
|
current_duplex = DUPLEX_INVALID;
|
|
|
|
err |= tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
err |= tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
|
|
if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP)
|
|
bmsr |= BMSR_LSTATUS;
|
|
else
|
|
bmsr &= ~BMSR_LSTATUS;
|
|
}
|
|
|
|
err |= tg3_readphy(tp, MII_BMCR, &bmcr);
|
|
|
|
if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
|
|
(tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
|
|
/* do nothing, just check for link up at the end */
|
|
} else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
|
|
u32 adv, new_adv;
|
|
|
|
err |= tg3_readphy(tp, MII_ADVERTISE, &adv);
|
|
new_adv = adv & ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF |
|
|
ADVERTISE_1000XPAUSE |
|
|
ADVERTISE_1000XPSE_ASYM |
|
|
ADVERTISE_SLCT);
|
|
|
|
new_adv |= tg3_advert_flowctrl_1000X(tp->link_config.flowctrl);
|
|
|
|
if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
|
|
new_adv |= ADVERTISE_1000XHALF;
|
|
if (tp->link_config.advertising & ADVERTISED_1000baseT_Full)
|
|
new_adv |= ADVERTISE_1000XFULL;
|
|
|
|
if ((new_adv != adv) || !(bmcr & BMCR_ANENABLE)) {
|
|
tg3_writephy(tp, MII_ADVERTISE, new_adv);
|
|
bmcr |= BMCR_ANENABLE | BMCR_ANRESTART;
|
|
tg3_writephy(tp, MII_BMCR, bmcr);
|
|
|
|
tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED);
|
|
tp->serdes_counter = SERDES_AN_TIMEOUT_5714S;
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
|
|
|
|
return err;
|
|
}
|
|
} else {
|
|
u32 new_bmcr;
|
|
|
|
bmcr &= ~BMCR_SPEED1000;
|
|
new_bmcr = bmcr & ~(BMCR_ANENABLE | BMCR_FULLDPLX);
|
|
|
|
if (tp->link_config.duplex == DUPLEX_FULL)
|
|
new_bmcr |= BMCR_FULLDPLX;
|
|
|
|
if (new_bmcr != bmcr) {
|
|
/* BMCR_SPEED1000 is a reserved bit that needs
|
|
* to be set on write.
|
|
*/
|
|
new_bmcr |= BMCR_SPEED1000;
|
|
|
|
/* Force a linkdown */
|
|
if (netif_carrier_ok(tp->dev)) {
|
|
u32 adv;
|
|
|
|
err |= tg3_readphy(tp, MII_ADVERTISE, &adv);
|
|
adv &= ~(ADVERTISE_1000XFULL |
|
|
ADVERTISE_1000XHALF |
|
|
ADVERTISE_SLCT);
|
|
tg3_writephy(tp, MII_ADVERTISE, adv);
|
|
tg3_writephy(tp, MII_BMCR, bmcr |
|
|
BMCR_ANRESTART |
|
|
BMCR_ANENABLE);
|
|
udelay(10);
|
|
netif_carrier_off(tp->dev);
|
|
}
|
|
tg3_writephy(tp, MII_BMCR, new_bmcr);
|
|
bmcr = new_bmcr;
|
|
err |= tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
err |= tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
|
|
ASIC_REV_5714) {
|
|
if (tr32(MAC_TX_STATUS) & TX_STATUS_LINK_UP)
|
|
bmsr |= BMSR_LSTATUS;
|
|
else
|
|
bmsr &= ~BMSR_LSTATUS;
|
|
}
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
|
|
}
|
|
}
|
|
|
|
if (bmsr & BMSR_LSTATUS) {
|
|
current_speed = SPEED_1000;
|
|
current_link_up = 1;
|
|
if (bmcr & BMCR_FULLDPLX)
|
|
current_duplex = DUPLEX_FULL;
|
|
else
|
|
current_duplex = DUPLEX_HALF;
|
|
|
|
local_adv = 0;
|
|
remote_adv = 0;
|
|
|
|
if (bmcr & BMCR_ANENABLE) {
|
|
u32 common;
|
|
|
|
err |= tg3_readphy(tp, MII_ADVERTISE, &local_adv);
|
|
err |= tg3_readphy(tp, MII_LPA, &remote_adv);
|
|
common = local_adv & remote_adv;
|
|
if (common & (ADVERTISE_1000XHALF |
|
|
ADVERTISE_1000XFULL)) {
|
|
if (common & ADVERTISE_1000XFULL)
|
|
current_duplex = DUPLEX_FULL;
|
|
else
|
|
current_duplex = DUPLEX_HALF;
|
|
}
|
|
else
|
|
current_link_up = 0;
|
|
}
|
|
}
|
|
|
|
if (current_link_up == 1 && current_duplex == DUPLEX_FULL)
|
|
tg3_setup_flow_control(tp, local_adv, remote_adv);
|
|
|
|
tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
|
|
if (tp->link_config.active_duplex == DUPLEX_HALF)
|
|
tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
|
|
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED);
|
|
|
|
tp->link_config.active_speed = current_speed;
|
|
tp->link_config.active_duplex = current_duplex;
|
|
|
|
if (current_link_up != netif_carrier_ok(tp->dev)) {
|
|
if (current_link_up)
|
|
netif_carrier_on(tp->dev);
|
|
else {
|
|
netif_carrier_off(tp->dev);
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
|
|
}
|
|
tg3_link_report(tp);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void tg3_serdes_parallel_detect(struct tg3 *tp)
|
|
{
|
|
if (tp->serdes_counter) {
|
|
/* Give autoneg time to complete. */
|
|
tp->serdes_counter--;
|
|
return;
|
|
}
|
|
if (!netif_carrier_ok(tp->dev) &&
|
|
(tp->link_config.autoneg == AUTONEG_ENABLE)) {
|
|
u32 bmcr;
|
|
|
|
tg3_readphy(tp, MII_BMCR, &bmcr);
|
|
if (bmcr & BMCR_ANENABLE) {
|
|
u32 phy1, phy2;
|
|
|
|
/* Select shadow register 0x1f */
|
|
tg3_writephy(tp, 0x1c, 0x7c00);
|
|
tg3_readphy(tp, 0x1c, &phy1);
|
|
|
|
/* Select expansion interrupt status register */
|
|
tg3_writephy(tp, 0x17, 0x0f01);
|
|
tg3_readphy(tp, 0x15, &phy2);
|
|
tg3_readphy(tp, 0x15, &phy2);
|
|
|
|
if ((phy1 & 0x10) && !(phy2 & 0x20)) {
|
|
/* We have signal detect and not receiving
|
|
* config code words, link is up by parallel
|
|
* detection.
|
|
*/
|
|
|
|
bmcr &= ~BMCR_ANENABLE;
|
|
bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX;
|
|
tg3_writephy(tp, MII_BMCR, bmcr);
|
|
tp->tg3_flags2 |= TG3_FLG2_PARALLEL_DETECT;
|
|
}
|
|
}
|
|
}
|
|
else if (netif_carrier_ok(tp->dev) &&
|
|
(tp->link_config.autoneg == AUTONEG_ENABLE) &&
|
|
(tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
|
|
u32 phy2;
|
|
|
|
/* Select expansion interrupt status register */
|
|
tg3_writephy(tp, 0x17, 0x0f01);
|
|
tg3_readphy(tp, 0x15, &phy2);
|
|
if (phy2 & 0x20) {
|
|
u32 bmcr;
|
|
|
|
/* Config code words received, turn on autoneg. */
|
|
tg3_readphy(tp, MII_BMCR, &bmcr);
|
|
tg3_writephy(tp, MII_BMCR, bmcr | BMCR_ANENABLE);
|
|
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
static int tg3_setup_phy(struct tg3 *tp, int force_reset)
|
|
{
|
|
int err;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
|
|
err = tg3_setup_fiber_phy(tp, force_reset);
|
|
} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
|
|
err = tg3_setup_fiber_mii_phy(tp, force_reset);
|
|
} else {
|
|
err = tg3_setup_copper_phy(tp, force_reset);
|
|
}
|
|
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
|
|
u32 val, scale;
|
|
|
|
val = tr32(TG3_CPMU_CLCK_STAT) & CPMU_CLCK_STAT_MAC_CLCK_MASK;
|
|
if (val == CPMU_CLCK_STAT_MAC_CLCK_62_5)
|
|
scale = 65;
|
|
else if (val == CPMU_CLCK_STAT_MAC_CLCK_6_25)
|
|
scale = 6;
|
|
else
|
|
scale = 12;
|
|
|
|
val = tr32(GRC_MISC_CFG) & ~GRC_MISC_CFG_PRESCALAR_MASK;
|
|
val |= (scale << GRC_MISC_CFG_PRESCALAR_SHIFT);
|
|
tw32(GRC_MISC_CFG, val);
|
|
}
|
|
|
|
if (tp->link_config.active_speed == SPEED_1000 &&
|
|
tp->link_config.active_duplex == DUPLEX_HALF)
|
|
tw32(MAC_TX_LENGTHS,
|
|
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
|
|
(6 << TX_LENGTHS_IPG_SHIFT) |
|
|
(0xff << TX_LENGTHS_SLOT_TIME_SHIFT)));
|
|
else
|
|
tw32(MAC_TX_LENGTHS,
|
|
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
|
|
(6 << TX_LENGTHS_IPG_SHIFT) |
|
|
(32 << TX_LENGTHS_SLOT_TIME_SHIFT)));
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
if (netif_carrier_ok(tp->dev)) {
|
|
tw32(HOSTCC_STAT_COAL_TICKS,
|
|
tp->coal.stats_block_coalesce_usecs);
|
|
} else {
|
|
tw32(HOSTCC_STAT_COAL_TICKS, 0);
|
|
}
|
|
}
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND) {
|
|
u32 val = tr32(PCIE_PWR_MGMT_THRESH);
|
|
if (!netif_carrier_ok(tp->dev))
|
|
val = (val & ~PCIE_PWR_MGMT_L1_THRESH_MSK) |
|
|
tp->pwrmgmt_thresh;
|
|
else
|
|
val |= PCIE_PWR_MGMT_L1_THRESH_MSK;
|
|
tw32(PCIE_PWR_MGMT_THRESH, val);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/* This is called whenever we suspect that the system chipset is re-
|
|
* ordering the sequence of MMIO to the tx send mailbox. The symptom
|
|
* is bogus tx completions. We try to recover by setting the
|
|
* TG3_FLAG_MBOX_WRITE_REORDER flag and resetting the chip later
|
|
* in the workqueue.
|
|
*/
|
|
static void tg3_tx_recover(struct tg3 *tp)
|
|
{
|
|
BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
|
|
tp->write32_tx_mbox == tg3_write_indirect_mbox);
|
|
|
|
printk(KERN_WARNING PFX "%s: The system may be re-ordering memory-"
|
|
"mapped I/O cycles to the network device, attempting to "
|
|
"recover. Please report the problem to the driver maintainer "
|
|
"and include system chipset information.\n", tp->dev->name);
|
|
|
|
spin_lock(&tp->lock);
|
|
tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
|
|
spin_unlock(&tp->lock);
|
|
}
|
|
|
|
static inline u32 tg3_tx_avail(struct tg3 *tp)
|
|
{
|
|
smp_mb();
|
|
return (tp->tx_pending -
|
|
((tp->tx_prod - tp->tx_cons) & (TG3_TX_RING_SIZE - 1)));
|
|
}
|
|
|
|
/* Tigon3 never reports partial packet sends. So we do not
|
|
* need special logic to handle SKBs that have not had all
|
|
* of their frags sent yet, like SunGEM does.
|
|
*/
|
|
static void tg3_tx(struct tg3 *tp)
|
|
{
|
|
u32 hw_idx = tp->hw_status->idx[0].tx_consumer;
|
|
u32 sw_idx = tp->tx_cons;
|
|
|
|
while (sw_idx != hw_idx) {
|
|
struct tx_ring_info *ri = &tp->tx_buffers[sw_idx];
|
|
struct sk_buff *skb = ri->skb;
|
|
int i, tx_bug = 0;
|
|
|
|
if (unlikely(skb == NULL)) {
|
|
tg3_tx_recover(tp);
|
|
return;
|
|
}
|
|
|
|
skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
|
|
|
|
ri->skb = NULL;
|
|
|
|
sw_idx = NEXT_TX(sw_idx);
|
|
|
|
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
|
|
ri = &tp->tx_buffers[sw_idx];
|
|
if (unlikely(ri->skb != NULL || sw_idx == hw_idx))
|
|
tx_bug = 1;
|
|
sw_idx = NEXT_TX(sw_idx);
|
|
}
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
if (unlikely(tx_bug)) {
|
|
tg3_tx_recover(tp);
|
|
return;
|
|
}
|
|
}
|
|
|
|
tp->tx_cons = sw_idx;
|
|
|
|
/* Need to make the tx_cons update visible to tg3_start_xmit()
|
|
* before checking for netif_queue_stopped(). Without the
|
|
* memory barrier, there is a small possibility that tg3_start_xmit()
|
|
* will miss it and cause the queue to be stopped forever.
|
|
*/
|
|
smp_mb();
|
|
|
|
if (unlikely(netif_queue_stopped(tp->dev) &&
|
|
(tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp)))) {
|
|
netif_tx_lock(tp->dev);
|
|
if (netif_queue_stopped(tp->dev) &&
|
|
(tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp)))
|
|
netif_wake_queue(tp->dev);
|
|
netif_tx_unlock(tp->dev);
|
|
}
|
|
}
|
|
|
|
/* Returns size of skb allocated or < 0 on error.
|
|
*
|
|
* We only need to fill in the address because the other members
|
|
* of the RX descriptor are invariant, see tg3_init_rings.
|
|
*
|
|
* Note the purposeful assymetry of cpu vs. chip accesses. For
|
|
* posting buffers we only dirty the first cache line of the RX
|
|
* descriptor (containing the address). Whereas for the RX status
|
|
* buffers the cpu only reads the last cacheline of the RX descriptor
|
|
* (to fetch the error flags, vlan tag, checksum, and opaque cookie).
|
|
*/
|
|
static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key,
|
|
int src_idx, u32 dest_idx_unmasked)
|
|
{
|
|
struct tg3_rx_buffer_desc *desc;
|
|
struct ring_info *map, *src_map;
|
|
struct sk_buff *skb;
|
|
dma_addr_t mapping;
|
|
int skb_size, dest_idx;
|
|
|
|
src_map = NULL;
|
|
switch (opaque_key) {
|
|
case RXD_OPAQUE_RING_STD:
|
|
dest_idx = dest_idx_unmasked % TG3_RX_RING_SIZE;
|
|
desc = &tp->rx_std[dest_idx];
|
|
map = &tp->rx_std_buffers[dest_idx];
|
|
if (src_idx >= 0)
|
|
src_map = &tp->rx_std_buffers[src_idx];
|
|
skb_size = tp->rx_pkt_buf_sz;
|
|
break;
|
|
|
|
case RXD_OPAQUE_RING_JUMBO:
|
|
dest_idx = dest_idx_unmasked % TG3_RX_JUMBO_RING_SIZE;
|
|
desc = &tp->rx_jumbo[dest_idx];
|
|
map = &tp->rx_jumbo_buffers[dest_idx];
|
|
if (src_idx >= 0)
|
|
src_map = &tp->rx_jumbo_buffers[src_idx];
|
|
skb_size = RX_JUMBO_PKT_BUF_SZ;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Do not overwrite any of the map or rp information
|
|
* until we are sure we can commit to a new buffer.
|
|
*
|
|
* Callers depend upon this behavior and assume that
|
|
* we leave everything unchanged if we fail.
|
|
*/
|
|
skb = netdev_alloc_skb(tp->dev, skb_size);
|
|
if (skb == NULL)
|
|
return -ENOMEM;
|
|
|
|
skb_reserve(skb, tp->rx_offset);
|
|
|
|
mapping = pci_map_single(tp->pdev, skb->data,
|
|
skb_size - tp->rx_offset,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
map->skb = skb;
|
|
pci_unmap_addr_set(map, mapping, mapping);
|
|
|
|
if (src_map != NULL)
|
|
src_map->skb = NULL;
|
|
|
|
desc->addr_hi = ((u64)mapping >> 32);
|
|
desc->addr_lo = ((u64)mapping & 0xffffffff);
|
|
|
|
return skb_size;
|
|
}
|
|
|
|
/* We only need to move over in the address because the other
|
|
* members of the RX descriptor are invariant. See notes above
|
|
* tg3_alloc_rx_skb for full details.
|
|
*/
|
|
static void tg3_recycle_rx(struct tg3 *tp, u32 opaque_key,
|
|
int src_idx, u32 dest_idx_unmasked)
|
|
{
|
|
struct tg3_rx_buffer_desc *src_desc, *dest_desc;
|
|
struct ring_info *src_map, *dest_map;
|
|
int dest_idx;
|
|
|
|
switch (opaque_key) {
|
|
case RXD_OPAQUE_RING_STD:
|
|
dest_idx = dest_idx_unmasked % TG3_RX_RING_SIZE;
|
|
dest_desc = &tp->rx_std[dest_idx];
|
|
dest_map = &tp->rx_std_buffers[dest_idx];
|
|
src_desc = &tp->rx_std[src_idx];
|
|
src_map = &tp->rx_std_buffers[src_idx];
|
|
break;
|
|
|
|
case RXD_OPAQUE_RING_JUMBO:
|
|
dest_idx = dest_idx_unmasked % TG3_RX_JUMBO_RING_SIZE;
|
|
dest_desc = &tp->rx_jumbo[dest_idx];
|
|
dest_map = &tp->rx_jumbo_buffers[dest_idx];
|
|
src_desc = &tp->rx_jumbo[src_idx];
|
|
src_map = &tp->rx_jumbo_buffers[src_idx];
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
|
|
dest_map->skb = src_map->skb;
|
|
pci_unmap_addr_set(dest_map, mapping,
|
|
pci_unmap_addr(src_map, mapping));
|
|
dest_desc->addr_hi = src_desc->addr_hi;
|
|
dest_desc->addr_lo = src_desc->addr_lo;
|
|
|
|
src_map->skb = NULL;
|
|
}
|
|
|
|
#if TG3_VLAN_TAG_USED
|
|
static int tg3_vlan_rx(struct tg3 *tp, struct sk_buff *skb, u16 vlan_tag)
|
|
{
|
|
return vlan_gro_receive(&tp->napi, tp->vlgrp, vlan_tag, skb);
|
|
}
|
|
#endif
|
|
|
|
/* The RX ring scheme is composed of multiple rings which post fresh
|
|
* buffers to the chip, and one special ring the chip uses to report
|
|
* status back to the host.
|
|
*
|
|
* The special ring reports the status of received packets to the
|
|
* host. The chip does not write into the original descriptor the
|
|
* RX buffer was obtained from. The chip simply takes the original
|
|
* descriptor as provided by the host, updates the status and length
|
|
* field, then writes this into the next status ring entry.
|
|
*
|
|
* Each ring the host uses to post buffers to the chip is described
|
|
* by a TG3_BDINFO entry in the chips SRAM area. When a packet arrives,
|
|
* it is first placed into the on-chip ram. When the packet's length
|
|
* is known, it walks down the TG3_BDINFO entries to select the ring.
|
|
* Each TG3_BDINFO specifies a MAXLEN field and the first TG3_BDINFO
|
|
* which is within the range of the new packet's length is chosen.
|
|
*
|
|
* The "separate ring for rx status" scheme may sound queer, but it makes
|
|
* sense from a cache coherency perspective. If only the host writes
|
|
* to the buffer post rings, and only the chip writes to the rx status
|
|
* rings, then cache lines never move beyond shared-modified state.
|
|
* If both the host and chip were to write into the same ring, cache line
|
|
* eviction could occur since both entities want it in an exclusive state.
|
|
*/
|
|
static int tg3_rx(struct tg3 *tp, int budget)
|
|
{
|
|
u32 work_mask, rx_std_posted = 0;
|
|
u32 sw_idx = tp->rx_rcb_ptr;
|
|
u16 hw_idx;
|
|
int received;
|
|
|
|
hw_idx = tp->hw_status->idx[0].rx_producer;
|
|
/*
|
|
* We need to order the read of hw_idx and the read of
|
|
* the opaque cookie.
|
|
*/
|
|
rmb();
|
|
work_mask = 0;
|
|
received = 0;
|
|
while (sw_idx != hw_idx && budget > 0) {
|
|
struct tg3_rx_buffer_desc *desc = &tp->rx_rcb[sw_idx];
|
|
unsigned int len;
|
|
struct sk_buff *skb;
|
|
dma_addr_t dma_addr;
|
|
u32 opaque_key, desc_idx, *post_ptr;
|
|
|
|
desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
|
|
opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
|
|
if (opaque_key == RXD_OPAQUE_RING_STD) {
|
|
dma_addr = pci_unmap_addr(&tp->rx_std_buffers[desc_idx],
|
|
mapping);
|
|
skb = tp->rx_std_buffers[desc_idx].skb;
|
|
post_ptr = &tp->rx_std_ptr;
|
|
rx_std_posted++;
|
|
} else if (opaque_key == RXD_OPAQUE_RING_JUMBO) {
|
|
dma_addr = pci_unmap_addr(&tp->rx_jumbo_buffers[desc_idx],
|
|
mapping);
|
|
skb = tp->rx_jumbo_buffers[desc_idx].skb;
|
|
post_ptr = &tp->rx_jumbo_ptr;
|
|
}
|
|
else {
|
|
goto next_pkt_nopost;
|
|
}
|
|
|
|
work_mask |= opaque_key;
|
|
|
|
if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
|
|
(desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) {
|
|
drop_it:
|
|
tg3_recycle_rx(tp, opaque_key,
|
|
desc_idx, *post_ptr);
|
|
drop_it_no_recycle:
|
|
/* Other statistics kept track of by card. */
|
|
tp->net_stats.rx_dropped++;
|
|
goto next_pkt;
|
|
}
|
|
|
|
len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) -
|
|
ETH_FCS_LEN;
|
|
|
|
if (len > RX_COPY_THRESHOLD
|
|
&& tp->rx_offset == NET_IP_ALIGN
|
|
/* rx_offset will likely not equal NET_IP_ALIGN
|
|
* if this is a 5701 card running in PCI-X mode
|
|
* [see tg3_get_invariants()]
|
|
*/
|
|
) {
|
|
int skb_size;
|
|
|
|
skb_size = tg3_alloc_rx_skb(tp, opaque_key,
|
|
desc_idx, *post_ptr);
|
|
if (skb_size < 0)
|
|
goto drop_it;
|
|
|
|
pci_unmap_single(tp->pdev, dma_addr,
|
|
skb_size - tp->rx_offset,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
skb_put(skb, len);
|
|
} else {
|
|
struct sk_buff *copy_skb;
|
|
|
|
tg3_recycle_rx(tp, opaque_key,
|
|
desc_idx, *post_ptr);
|
|
|
|
copy_skb = netdev_alloc_skb(tp->dev,
|
|
len + TG3_RAW_IP_ALIGN);
|
|
if (copy_skb == NULL)
|
|
goto drop_it_no_recycle;
|
|
|
|
skb_reserve(copy_skb, TG3_RAW_IP_ALIGN);
|
|
skb_put(copy_skb, len);
|
|
pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE);
|
|
skb_copy_from_linear_data(skb, copy_skb->data, len);
|
|
pci_dma_sync_single_for_device(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE);
|
|
|
|
/* We'll reuse the original ring buffer. */
|
|
skb = copy_skb;
|
|
}
|
|
|
|
if ((tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) &&
|
|
(desc->type_flags & RXD_FLAG_TCPUDP_CSUM) &&
|
|
(((desc->ip_tcp_csum & RXD_TCPCSUM_MASK)
|
|
>> RXD_TCPCSUM_SHIFT) == 0xffff))
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
else
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
skb->protocol = eth_type_trans(skb, tp->dev);
|
|
|
|
if (len > (tp->dev->mtu + ETH_HLEN) &&
|
|
skb->protocol != htons(ETH_P_8021Q)) {
|
|
dev_kfree_skb(skb);
|
|
goto next_pkt;
|
|
}
|
|
|
|
#if TG3_VLAN_TAG_USED
|
|
if (tp->vlgrp != NULL &&
|
|
desc->type_flags & RXD_FLAG_VLAN) {
|
|
tg3_vlan_rx(tp, skb,
|
|
desc->err_vlan & RXD_VLAN_MASK);
|
|
} else
|
|
#endif
|
|
napi_gro_receive(&tp->napi, skb);
|
|
|
|
received++;
|
|
budget--;
|
|
|
|
next_pkt:
|
|
(*post_ptr)++;
|
|
|
|
if (unlikely(rx_std_posted >= tp->rx_std_max_post)) {
|
|
u32 idx = *post_ptr % TG3_RX_RING_SIZE;
|
|
|
|
tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX +
|
|
TG3_64BIT_REG_LOW, idx);
|
|
work_mask &= ~RXD_OPAQUE_RING_STD;
|
|
rx_std_posted = 0;
|
|
}
|
|
next_pkt_nopost:
|
|
sw_idx++;
|
|
sw_idx &= (TG3_RX_RCB_RING_SIZE(tp) - 1);
|
|
|
|
/* Refresh hw_idx to see if there is new work */
|
|
if (sw_idx == hw_idx) {
|
|
hw_idx = tp->hw_status->idx[0].rx_producer;
|
|
rmb();
|
|
}
|
|
}
|
|
|
|
/* ACK the status ring. */
|
|
tp->rx_rcb_ptr = sw_idx;
|
|
tw32_rx_mbox(MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW, sw_idx);
|
|
|
|
/* Refill RX ring(s). */
|
|
if (work_mask & RXD_OPAQUE_RING_STD) {
|
|
sw_idx = tp->rx_std_ptr % TG3_RX_RING_SIZE;
|
|
tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
|
|
sw_idx);
|
|
}
|
|
if (work_mask & RXD_OPAQUE_RING_JUMBO) {
|
|
sw_idx = tp->rx_jumbo_ptr % TG3_RX_JUMBO_RING_SIZE;
|
|
tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
|
|
sw_idx);
|
|
}
|
|
mmiowb();
|
|
|
|
return received;
|
|
}
|
|
|
|
static int tg3_poll_work(struct tg3 *tp, int work_done, int budget)
|
|
{
|
|
struct tg3_hw_status *sblk = tp->hw_status;
|
|
|
|
/* handle link change and other phy events */
|
|
if (!(tp->tg3_flags &
|
|
(TG3_FLAG_USE_LINKCHG_REG |
|
|
TG3_FLAG_POLL_SERDES))) {
|
|
if (sblk->status & SD_STATUS_LINK_CHG) {
|
|
sblk->status = SD_STATUS_UPDATED |
|
|
(sblk->status & ~SD_STATUS_LINK_CHG);
|
|
spin_lock(&tp->lock);
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
|
|
tw32_f(MAC_STATUS,
|
|
(MAC_STATUS_SYNC_CHANGED |
|
|
MAC_STATUS_CFG_CHANGED |
|
|
MAC_STATUS_MI_COMPLETION |
|
|
MAC_STATUS_LNKSTATE_CHANGED));
|
|
udelay(40);
|
|
} else
|
|
tg3_setup_phy(tp, 0);
|
|
spin_unlock(&tp->lock);
|
|
}
|
|
}
|
|
|
|
/* run TX completion thread */
|
|
if (sblk->idx[0].tx_consumer != tp->tx_cons) {
|
|
tg3_tx(tp);
|
|
if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
|
|
return work_done;
|
|
}
|
|
|
|
/* run RX thread, within the bounds set by NAPI.
|
|
* All RX "locking" is done by ensuring outside
|
|
* code synchronizes with tg3->napi.poll()
|
|
*/
|
|
if (sblk->idx[0].rx_producer != tp->rx_rcb_ptr)
|
|
work_done += tg3_rx(tp, budget - work_done);
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static int tg3_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct tg3 *tp = container_of(napi, struct tg3, napi);
|
|
int work_done = 0;
|
|
struct tg3_hw_status *sblk = tp->hw_status;
|
|
|
|
while (1) {
|
|
work_done = tg3_poll_work(tp, work_done, budget);
|
|
|
|
if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
|
|
goto tx_recovery;
|
|
|
|
if (unlikely(work_done >= budget))
|
|
break;
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
|
|
/* tp->last_tag is used in tg3_restart_ints() below
|
|
* to tell the hw how much work has been processed,
|
|
* so we must read it before checking for more work.
|
|
*/
|
|
tp->last_tag = sblk->status_tag;
|
|
tp->last_irq_tag = tp->last_tag;
|
|
rmb();
|
|
} else
|
|
sblk->status &= ~SD_STATUS_UPDATED;
|
|
|
|
if (likely(!tg3_has_work(tp))) {
|
|
napi_complete(napi);
|
|
tg3_restart_ints(tp);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return work_done;
|
|
|
|
tx_recovery:
|
|
/* work_done is guaranteed to be less than budget. */
|
|
napi_complete(napi);
|
|
schedule_work(&tp->reset_task);
|
|
return work_done;
|
|
}
|
|
|
|
static void tg3_irq_quiesce(struct tg3 *tp)
|
|
{
|
|
BUG_ON(tp->irq_sync);
|
|
|
|
tp->irq_sync = 1;
|
|
smp_mb();
|
|
|
|
synchronize_irq(tp->pdev->irq);
|
|
}
|
|
|
|
static inline int tg3_irq_sync(struct tg3 *tp)
|
|
{
|
|
return tp->irq_sync;
|
|
}
|
|
|
|
/* Fully shutdown all tg3 driver activity elsewhere in the system.
|
|
* If irq_sync is non-zero, then the IRQ handler must be synchronized
|
|
* with as well. Most of the time, this is not necessary except when
|
|
* shutting down the device.
|
|
*/
|
|
static inline void tg3_full_lock(struct tg3 *tp, int irq_sync)
|
|
{
|
|
spin_lock_bh(&tp->lock);
|
|
if (irq_sync)
|
|
tg3_irq_quiesce(tp);
|
|
}
|
|
|
|
static inline void tg3_full_unlock(struct tg3 *tp)
|
|
{
|
|
spin_unlock_bh(&tp->lock);
|
|
}
|
|
|
|
/* One-shot MSI handler - Chip automatically disables interrupt
|
|
* after sending MSI so driver doesn't have to do it.
|
|
*/
|
|
static irqreturn_t tg3_msi_1shot(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
prefetch(tp->hw_status);
|
|
prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
|
|
|
|
if (likely(!tg3_irq_sync(tp)))
|
|
napi_schedule(&tp->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* MSI ISR - No need to check for interrupt sharing and no need to
|
|
* flush status block and interrupt mailbox. PCI ordering rules
|
|
* guarantee that MSI will arrive after the status block.
|
|
*/
|
|
static irqreturn_t tg3_msi(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
prefetch(tp->hw_status);
|
|
prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
|
|
/*
|
|
* Writing any value to intr-mbox-0 clears PCI INTA# and
|
|
* chip-internal interrupt pending events.
|
|
* Writing non-zero to intr-mbox-0 additional tells the
|
|
* NIC to stop sending us irqs, engaging "in-intr-handler"
|
|
* event coalescing.
|
|
*/
|
|
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
|
|
if (likely(!tg3_irq_sync(tp)))
|
|
napi_schedule(&tp->napi);
|
|
|
|
return IRQ_RETVAL(1);
|
|
}
|
|
|
|
static irqreturn_t tg3_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
struct tg3_hw_status *sblk = tp->hw_status;
|
|
unsigned int handled = 1;
|
|
|
|
/* In INTx mode, it is possible for the interrupt to arrive at
|
|
* the CPU before the status block posted prior to the interrupt.
|
|
* Reading the PCI State register will confirm whether the
|
|
* interrupt is ours and will flush the status block.
|
|
*/
|
|
if (unlikely(!(sblk->status & SD_STATUS_UPDATED))) {
|
|
if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
|
|
(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
|
|
handled = 0;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Writing any value to intr-mbox-0 clears PCI INTA# and
|
|
* chip-internal interrupt pending events.
|
|
* Writing non-zero to intr-mbox-0 additional tells the
|
|
* NIC to stop sending us irqs, engaging "in-intr-handler"
|
|
* event coalescing.
|
|
*
|
|
* Flush the mailbox to de-assert the IRQ immediately to prevent
|
|
* spurious interrupts. The flush impacts performance but
|
|
* excessive spurious interrupts can be worse in some cases.
|
|
*/
|
|
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
|
|
if (tg3_irq_sync(tp))
|
|
goto out;
|
|
sblk->status &= ~SD_STATUS_UPDATED;
|
|
if (likely(tg3_has_work(tp))) {
|
|
prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
|
|
napi_schedule(&tp->napi);
|
|
} else {
|
|
/* No work, shared interrupt perhaps? re-enable
|
|
* interrupts, and flush that PCI write
|
|
*/
|
|
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
|
|
0x00000000);
|
|
}
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
struct tg3_hw_status *sblk = tp->hw_status;
|
|
unsigned int handled = 1;
|
|
|
|
/* In INTx mode, it is possible for the interrupt to arrive at
|
|
* the CPU before the status block posted prior to the interrupt.
|
|
* Reading the PCI State register will confirm whether the
|
|
* interrupt is ours and will flush the status block.
|
|
*/
|
|
if (unlikely(sblk->status_tag == tp->last_irq_tag)) {
|
|
if ((tp->tg3_flags & TG3_FLAG_CHIP_RESETTING) ||
|
|
(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
|
|
handled = 0;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* writing any value to intr-mbox-0 clears PCI INTA# and
|
|
* chip-internal interrupt pending events.
|
|
* writing non-zero to intr-mbox-0 additional tells the
|
|
* NIC to stop sending us irqs, engaging "in-intr-handler"
|
|
* event coalescing.
|
|
*
|
|
* Flush the mailbox to de-assert the IRQ immediately to prevent
|
|
* spurious interrupts. The flush impacts performance but
|
|
* excessive spurious interrupts can be worse in some cases.
|
|
*/
|
|
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
|
|
|
|
/*
|
|
* In a shared interrupt configuration, sometimes other devices'
|
|
* interrupts will scream. We record the current status tag here
|
|
* so that the above check can report that the screaming interrupts
|
|
* are unhandled. Eventually they will be silenced.
|
|
*/
|
|
tp->last_irq_tag = sblk->status_tag;
|
|
|
|
if (tg3_irq_sync(tp))
|
|
goto out;
|
|
|
|
prefetch(&tp->rx_rcb[tp->rx_rcb_ptr]);
|
|
|
|
napi_schedule(&tp->napi);
|
|
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/* ISR for interrupt test */
|
|
static irqreturn_t tg3_test_isr(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
struct tg3_hw_status *sblk = tp->hw_status;
|
|
|
|
if ((sblk->status & SD_STATUS_UPDATED) ||
|
|
!(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) {
|
|
tg3_disable_ints(tp);
|
|
return IRQ_RETVAL(1);
|
|
}
|
|
return IRQ_RETVAL(0);
|
|
}
|
|
|
|
static int tg3_init_hw(struct tg3 *, int);
|
|
static int tg3_halt(struct tg3 *, int, int);
|
|
|
|
/* Restart hardware after configuration changes, self-test, etc.
|
|
* Invoked with tp->lock held.
|
|
*/
|
|
static int tg3_restart_hw(struct tg3 *tp, int reset_phy)
|
|
__releases(tp->lock)
|
|
__acquires(tp->lock)
|
|
{
|
|
int err;
|
|
|
|
err = tg3_init_hw(tp, reset_phy);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "%s: Failed to re-initialize device, "
|
|
"aborting.\n", tp->dev->name);
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
tg3_full_unlock(tp);
|
|
del_timer_sync(&tp->timer);
|
|
tp->irq_sync = 0;
|
|
napi_enable(&tp->napi);
|
|
dev_close(tp->dev);
|
|
tg3_full_lock(tp, 0);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void tg3_poll_controller(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
tg3_interrupt(tp->pdev->irq, dev);
|
|
}
|
|
#endif
|
|
|
|
static void tg3_reset_task(struct work_struct *work)
|
|
{
|
|
struct tg3 *tp = container_of(work, struct tg3, reset_task);
|
|
int err;
|
|
unsigned int restart_timer;
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
if (!netif_running(tp->dev)) {
|
|
tg3_full_unlock(tp);
|
|
return;
|
|
}
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
tg3_phy_stop(tp);
|
|
|
|
tg3_netif_stop(tp);
|
|
|
|
tg3_full_lock(tp, 1);
|
|
|
|
restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER;
|
|
tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING) {
|
|
tp->write32_tx_mbox = tg3_write32_tx_mbox;
|
|
tp->write32_rx_mbox = tg3_write_flush_reg32;
|
|
tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
|
|
tp->tg3_flags &= ~TG3_FLAG_TX_RECOVERY_PENDING;
|
|
}
|
|
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
|
|
err = tg3_init_hw(tp, 1);
|
|
if (err)
|
|
goto out;
|
|
|
|
tg3_netif_start(tp);
|
|
|
|
if (restart_timer)
|
|
mod_timer(&tp->timer, jiffies + 1);
|
|
|
|
out:
|
|
tg3_full_unlock(tp);
|
|
|
|
if (!err)
|
|
tg3_phy_start(tp);
|
|
}
|
|
|
|
static void tg3_dump_short_state(struct tg3 *tp)
|
|
{
|
|
printk(KERN_ERR PFX "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
|
|
tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
|
|
printk(KERN_ERR PFX "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
|
|
tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
|
|
}
|
|
|
|
static void tg3_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (netif_msg_tx_err(tp)) {
|
|
printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
|
|
dev->name);
|
|
tg3_dump_short_state(tp);
|
|
}
|
|
|
|
schedule_work(&tp->reset_task);
|
|
}
|
|
|
|
/* Test for DMA buffers crossing any 4GB boundaries: 4G, 8G, etc */
|
|
static inline int tg3_4g_overflow_test(dma_addr_t mapping, int len)
|
|
{
|
|
u32 base = (u32) mapping & 0xffffffff;
|
|
|
|
return ((base > 0xffffdcc0) &&
|
|
(base + len + 8 < base));
|
|
}
|
|
|
|
/* Test for DMA addresses > 40-bit */
|
|
static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
|
|
int len)
|
|
{
|
|
#if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64)
|
|
if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG)
|
|
return (((u64) mapping + len) > DMA_BIT_MASK(40));
|
|
return 0;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static void tg3_set_txd(struct tg3 *, int, dma_addr_t, int, u32, u32);
|
|
|
|
/* Workaround 4GB and 40-bit hardware DMA bugs. */
|
|
static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
|
|
u32 last_plus_one, u32 *start,
|
|
u32 base_flags, u32 mss)
|
|
{
|
|
struct sk_buff *new_skb;
|
|
dma_addr_t new_addr = 0;
|
|
u32 entry = *start;
|
|
int i, ret = 0;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701)
|
|
new_skb = skb_copy(skb, GFP_ATOMIC);
|
|
else {
|
|
int more_headroom = 4 - ((unsigned long)skb->data & 3);
|
|
|
|
new_skb = skb_copy_expand(skb,
|
|
skb_headroom(skb) + more_headroom,
|
|
skb_tailroom(skb), GFP_ATOMIC);
|
|
}
|
|
|
|
if (!new_skb) {
|
|
ret = -1;
|
|
} else {
|
|
/* New SKB is guaranteed to be linear. */
|
|
entry = *start;
|
|
ret = skb_dma_map(&tp->pdev->dev, new_skb, DMA_TO_DEVICE);
|
|
new_addr = skb_shinfo(new_skb)->dma_head;
|
|
|
|
/* Make sure new skb does not cross any 4G boundaries.
|
|
* Drop the packet if it does.
|
|
*/
|
|
if (ret || tg3_4g_overflow_test(new_addr, new_skb->len)) {
|
|
if (!ret)
|
|
skb_dma_unmap(&tp->pdev->dev, new_skb,
|
|
DMA_TO_DEVICE);
|
|
ret = -1;
|
|
dev_kfree_skb(new_skb);
|
|
new_skb = NULL;
|
|
} else {
|
|
tg3_set_txd(tp, entry, new_addr, new_skb->len,
|
|
base_flags, 1 | (mss << 1));
|
|
*start = NEXT_TX(entry);
|
|
}
|
|
}
|
|
|
|
/* Now clean up the sw ring entries. */
|
|
i = 0;
|
|
while (entry != last_plus_one) {
|
|
if (i == 0) {
|
|
tp->tx_buffers[entry].skb = new_skb;
|
|
} else {
|
|
tp->tx_buffers[entry].skb = NULL;
|
|
}
|
|
entry = NEXT_TX(entry);
|
|
i++;
|
|
}
|
|
|
|
skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
|
|
dev_kfree_skb(skb);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tg3_set_txd(struct tg3 *tp, int entry,
|
|
dma_addr_t mapping, int len, u32 flags,
|
|
u32 mss_and_is_end)
|
|
{
|
|
struct tg3_tx_buffer_desc *txd = &tp->tx_ring[entry];
|
|
int is_end = (mss_and_is_end & 0x1);
|
|
u32 mss = (mss_and_is_end >> 1);
|
|
u32 vlan_tag = 0;
|
|
|
|
if (is_end)
|
|
flags |= TXD_FLAG_END;
|
|
if (flags & TXD_FLAG_VLAN) {
|
|
vlan_tag = flags >> 16;
|
|
flags &= 0xffff;
|
|
}
|
|
vlan_tag |= (mss << TXD_MSS_SHIFT);
|
|
|
|
txd->addr_hi = ((u64) mapping >> 32);
|
|
txd->addr_lo = ((u64) mapping & 0xffffffff);
|
|
txd->len_flags = (len << TXD_LEN_SHIFT) | flags;
|
|
txd->vlan_tag = vlan_tag << TXD_VLAN_TAG_SHIFT;
|
|
}
|
|
|
|
/* hard_start_xmit for devices that don't have any bugs and
|
|
* support TG3_FLG2_HW_TSO_2 only.
|
|
*/
|
|
static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
u32 len, entry, base_flags, mss;
|
|
struct skb_shared_info *sp;
|
|
dma_addr_t mapping;
|
|
|
|
len = skb_headlen(skb);
|
|
|
|
/* We are running in BH disabled context with netif_tx_lock
|
|
* and TX reclaim runs via tp->napi.poll inside of a software
|
|
* interrupt. Furthermore, IRQ processing runs lockless so we have
|
|
* no IRQ context deadlocks to worry about either. Rejoice!
|
|
*/
|
|
if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
|
|
if (!netif_queue_stopped(dev)) {
|
|
netif_stop_queue(dev);
|
|
|
|
/* This is a hard error, log it. */
|
|
printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
|
|
"queue awake!\n", dev->name);
|
|
}
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
entry = tp->tx_prod;
|
|
base_flags = 0;
|
|
mss = 0;
|
|
if ((mss = skb_shinfo(skb)->gso_size) != 0) {
|
|
int tcp_opt_len, ip_tcp_len;
|
|
|
|
if (skb_header_cloned(skb) &&
|
|
pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
|
|
dev_kfree_skb(skb);
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
|
|
mss |= (skb_headlen(skb) - ETH_HLEN) << 9;
|
|
else {
|
|
struct iphdr *iph = ip_hdr(skb);
|
|
|
|
tcp_opt_len = tcp_optlen(skb);
|
|
ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr);
|
|
|
|
iph->check = 0;
|
|
iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
|
|
mss |= (ip_tcp_len + tcp_opt_len) << 9;
|
|
}
|
|
|
|
base_flags |= (TXD_FLAG_CPU_PRE_DMA |
|
|
TXD_FLAG_CPU_POST_DMA);
|
|
|
|
tcp_hdr(skb)->check = 0;
|
|
|
|
}
|
|
else if (skb->ip_summed == CHECKSUM_PARTIAL)
|
|
base_flags |= TXD_FLAG_TCPUDP_CSUM;
|
|
#if TG3_VLAN_TAG_USED
|
|
if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
|
|
base_flags |= (TXD_FLAG_VLAN |
|
|
(vlan_tx_tag_get(skb) << 16));
|
|
#endif
|
|
|
|
if (skb_dma_map(&tp->pdev->dev, skb, DMA_TO_DEVICE)) {
|
|
dev_kfree_skb(skb);
|
|
goto out_unlock;
|
|
}
|
|
|
|
sp = skb_shinfo(skb);
|
|
|
|
mapping = sp->dma_head;
|
|
|
|
tp->tx_buffers[entry].skb = skb;
|
|
|
|
tg3_set_txd(tp, entry, mapping, len, base_flags,
|
|
(skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
|
|
|
|
entry = NEXT_TX(entry);
|
|
|
|
/* Now loop through additional data fragments, and queue them. */
|
|
if (skb_shinfo(skb)->nr_frags > 0) {
|
|
unsigned int i, last;
|
|
|
|
last = skb_shinfo(skb)->nr_frags - 1;
|
|
for (i = 0; i <= last; i++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
|
|
len = frag->size;
|
|
mapping = sp->dma_maps[i];
|
|
tp->tx_buffers[entry].skb = NULL;
|
|
|
|
tg3_set_txd(tp, entry, mapping, len,
|
|
base_flags, (i == last) | (mss << 1));
|
|
|
|
entry = NEXT_TX(entry);
|
|
}
|
|
}
|
|
|
|
/* Packets are ready, update Tx producer idx local and on card. */
|
|
tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
|
|
|
|
tp->tx_prod = entry;
|
|
if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
|
|
netif_stop_queue(dev);
|
|
if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp))
|
|
netif_wake_queue(tp->dev);
|
|
}
|
|
|
|
out_unlock:
|
|
mmiowb();
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int tg3_start_xmit_dma_bug(struct sk_buff *, struct net_device *);
|
|
|
|
/* Use GSO to workaround a rare TSO bug that may be triggered when the
|
|
* TSO header is greater than 80 bytes.
|
|
*/
|
|
static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb)
|
|
{
|
|
struct sk_buff *segs, *nskb;
|
|
|
|
/* Estimate the number of fragments in the worst case */
|
|
if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))) {
|
|
netif_stop_queue(tp->dev);
|
|
if (tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))
|
|
return NETDEV_TX_BUSY;
|
|
|
|
netif_wake_queue(tp->dev);
|
|
}
|
|
|
|
segs = skb_gso_segment(skb, tp->dev->features & ~NETIF_F_TSO);
|
|
if (IS_ERR(segs))
|
|
goto tg3_tso_bug_end;
|
|
|
|
do {
|
|
nskb = segs;
|
|
segs = segs->next;
|
|
nskb->next = NULL;
|
|
tg3_start_xmit_dma_bug(nskb, tp->dev);
|
|
} while (segs);
|
|
|
|
tg3_tso_bug_end:
|
|
dev_kfree_skb(skb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and
|
|
* support TG3_FLG2_HW_TSO_1 or firmware TSO only.
|
|
*/
|
|
static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
u32 len, entry, base_flags, mss;
|
|
struct skb_shared_info *sp;
|
|
int would_hit_hwbug;
|
|
dma_addr_t mapping;
|
|
|
|
len = skb_headlen(skb);
|
|
|
|
/* We are running in BH disabled context with netif_tx_lock
|
|
* and TX reclaim runs via tp->napi.poll inside of a software
|
|
* interrupt. Furthermore, IRQ processing runs lockless so we have
|
|
* no IRQ context deadlocks to worry about either. Rejoice!
|
|
*/
|
|
if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
|
|
if (!netif_queue_stopped(dev)) {
|
|
netif_stop_queue(dev);
|
|
|
|
/* This is a hard error, log it. */
|
|
printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
|
|
"queue awake!\n", dev->name);
|
|
}
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
entry = tp->tx_prod;
|
|
base_flags = 0;
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL)
|
|
base_flags |= TXD_FLAG_TCPUDP_CSUM;
|
|
mss = 0;
|
|
if ((mss = skb_shinfo(skb)->gso_size) != 0) {
|
|
struct iphdr *iph;
|
|
int tcp_opt_len, ip_tcp_len, hdr_len;
|
|
|
|
if (skb_header_cloned(skb) &&
|
|
pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
|
|
dev_kfree_skb(skb);
|
|
goto out_unlock;
|
|
}
|
|
|
|
tcp_opt_len = tcp_optlen(skb);
|
|
ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr);
|
|
|
|
hdr_len = ip_tcp_len + tcp_opt_len;
|
|
if (unlikely((ETH_HLEN + hdr_len) > 80) &&
|
|
(tp->tg3_flags2 & TG3_FLG2_TSO_BUG))
|
|
return (tg3_tso_bug(tp, skb));
|
|
|
|
base_flags |= (TXD_FLAG_CPU_PRE_DMA |
|
|
TXD_FLAG_CPU_POST_DMA);
|
|
|
|
iph = ip_hdr(skb);
|
|
iph->check = 0;
|
|
iph->tot_len = htons(mss + hdr_len);
|
|
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
|
|
tcp_hdr(skb)->check = 0;
|
|
base_flags &= ~TXD_FLAG_TCPUDP_CSUM;
|
|
} else
|
|
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
|
|
iph->daddr, 0,
|
|
IPPROTO_TCP,
|
|
0);
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) {
|
|
if (tcp_opt_len || iph->ihl > 5) {
|
|
int tsflags;
|
|
|
|
tsflags = (iph->ihl - 5) + (tcp_opt_len >> 2);
|
|
mss |= (tsflags << 11);
|
|
}
|
|
} else {
|
|
if (tcp_opt_len || iph->ihl > 5) {
|
|
int tsflags;
|
|
|
|
tsflags = (iph->ihl - 5) + (tcp_opt_len >> 2);
|
|
base_flags |= tsflags << 12;
|
|
}
|
|
}
|
|
}
|
|
#if TG3_VLAN_TAG_USED
|
|
if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
|
|
base_flags |= (TXD_FLAG_VLAN |
|
|
(vlan_tx_tag_get(skb) << 16));
|
|
#endif
|
|
|
|
if (skb_dma_map(&tp->pdev->dev, skb, DMA_TO_DEVICE)) {
|
|
dev_kfree_skb(skb);
|
|
goto out_unlock;
|
|
}
|
|
|
|
sp = skb_shinfo(skb);
|
|
|
|
mapping = sp->dma_head;
|
|
|
|
tp->tx_buffers[entry].skb = skb;
|
|
|
|
would_hit_hwbug = 0;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_5701_DMA_BUG)
|
|
would_hit_hwbug = 1;
|
|
else if (tg3_4g_overflow_test(mapping, len))
|
|
would_hit_hwbug = 1;
|
|
|
|
tg3_set_txd(tp, entry, mapping, len, base_flags,
|
|
(skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
|
|
|
|
entry = NEXT_TX(entry);
|
|
|
|
/* Now loop through additional data fragments, and queue them. */
|
|
if (skb_shinfo(skb)->nr_frags > 0) {
|
|
unsigned int i, last;
|
|
|
|
last = skb_shinfo(skb)->nr_frags - 1;
|
|
for (i = 0; i <= last; i++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
|
|
len = frag->size;
|
|
mapping = sp->dma_maps[i];
|
|
|
|
tp->tx_buffers[entry].skb = NULL;
|
|
|
|
if (tg3_4g_overflow_test(mapping, len))
|
|
would_hit_hwbug = 1;
|
|
|
|
if (tg3_40bit_overflow_test(tp, mapping, len))
|
|
would_hit_hwbug = 1;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
|
|
tg3_set_txd(tp, entry, mapping, len,
|
|
base_flags, (i == last)|(mss << 1));
|
|
else
|
|
tg3_set_txd(tp, entry, mapping, len,
|
|
base_flags, (i == last));
|
|
|
|
entry = NEXT_TX(entry);
|
|
}
|
|
}
|
|
|
|
if (would_hit_hwbug) {
|
|
u32 last_plus_one = entry;
|
|
u32 start;
|
|
|
|
start = entry - 1 - skb_shinfo(skb)->nr_frags;
|
|
start &= (TG3_TX_RING_SIZE - 1);
|
|
|
|
/* If the workaround fails due to memory/mapping
|
|
* failure, silently drop this packet.
|
|
*/
|
|
if (tigon3_dma_hwbug_workaround(tp, skb, last_plus_one,
|
|
&start, base_flags, mss))
|
|
goto out_unlock;
|
|
|
|
entry = start;
|
|
}
|
|
|
|
/* Packets are ready, update Tx producer idx local and on card. */
|
|
tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
|
|
|
|
tp->tx_prod = entry;
|
|
if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
|
|
netif_stop_queue(dev);
|
|
if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH(tp))
|
|
netif_wake_queue(tp->dev);
|
|
}
|
|
|
|
out_unlock:
|
|
mmiowb();
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
|
|
int new_mtu)
|
|
{
|
|
dev->mtu = new_mtu;
|
|
|
|
if (new_mtu > ETH_DATA_LEN) {
|
|
if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
|
|
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
|
|
ethtool_op_set_tso(dev, 0);
|
|
}
|
|
else
|
|
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
|
|
} else {
|
|
if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
|
|
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
|
|
tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
|
|
}
|
|
}
|
|
|
|
static int tg3_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int err;
|
|
|
|
if (new_mtu < TG3_MIN_MTU || new_mtu > TG3_MAX_MTU(tp))
|
|
return -EINVAL;
|
|
|
|
if (!netif_running(dev)) {
|
|
/* We'll just catch it later when the
|
|
* device is up'd.
|
|
*/
|
|
tg3_set_mtu(dev, tp, new_mtu);
|
|
return 0;
|
|
}
|
|
|
|
tg3_phy_stop(tp);
|
|
|
|
tg3_netif_stop(tp);
|
|
|
|
tg3_full_lock(tp, 1);
|
|
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
|
|
tg3_set_mtu(dev, tp, new_mtu);
|
|
|
|
err = tg3_restart_hw(tp, 0);
|
|
|
|
if (!err)
|
|
tg3_netif_start(tp);
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
if (!err)
|
|
tg3_phy_start(tp);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Free up pending packets in all rx/tx rings.
|
|
*
|
|
* The chip has been shut down and the driver detached from
|
|
* the networking, so no interrupts or new tx packets will
|
|
* end up in the driver. tp->{tx,}lock is not held and we are not
|
|
* in an interrupt context and thus may sleep.
|
|
*/
|
|
static void tg3_free_rings(struct tg3 *tp)
|
|
{
|
|
struct ring_info *rxp;
|
|
int i;
|
|
|
|
for (i = 0; i < TG3_RX_RING_SIZE; i++) {
|
|
rxp = &tp->rx_std_buffers[i];
|
|
|
|
if (rxp->skb == NULL)
|
|
continue;
|
|
pci_unmap_single(tp->pdev,
|
|
pci_unmap_addr(rxp, mapping),
|
|
tp->rx_pkt_buf_sz - tp->rx_offset,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_any(rxp->skb);
|
|
rxp->skb = NULL;
|
|
}
|
|
|
|
for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
|
|
rxp = &tp->rx_jumbo_buffers[i];
|
|
|
|
if (rxp->skb == NULL)
|
|
continue;
|
|
pci_unmap_single(tp->pdev,
|
|
pci_unmap_addr(rxp, mapping),
|
|
RX_JUMBO_PKT_BUF_SZ - tp->rx_offset,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_any(rxp->skb);
|
|
rxp->skb = NULL;
|
|
}
|
|
|
|
for (i = 0; i < TG3_TX_RING_SIZE; ) {
|
|
struct tx_ring_info *txp;
|
|
struct sk_buff *skb;
|
|
|
|
txp = &tp->tx_buffers[i];
|
|
skb = txp->skb;
|
|
|
|
if (skb == NULL) {
|
|
i++;
|
|
continue;
|
|
}
|
|
|
|
skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
|
|
|
|
txp->skb = NULL;
|
|
|
|
i += skb_shinfo(skb)->nr_frags + 1;
|
|
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
}
|
|
|
|
/* Initialize tx/rx rings for packet processing.
|
|
*
|
|
* The chip has been shut down and the driver detached from
|
|
* the networking, so no interrupts or new tx packets will
|
|
* end up in the driver. tp->{tx,}lock are held and thus
|
|
* we may not sleep.
|
|
*/
|
|
static int tg3_init_rings(struct tg3 *tp)
|
|
{
|
|
u32 i;
|
|
|
|
/* Free up all the SKBs. */
|
|
tg3_free_rings(tp);
|
|
|
|
/* Zero out all descriptors. */
|
|
memset(tp->rx_std, 0, TG3_RX_RING_BYTES);
|
|
memset(tp->rx_jumbo, 0, TG3_RX_JUMBO_RING_BYTES);
|
|
memset(tp->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
|
|
memset(tp->tx_ring, 0, TG3_TX_RING_BYTES);
|
|
|
|
tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ;
|
|
if ((tp->tg3_flags2 & TG3_FLG2_5780_CLASS) &&
|
|
(tp->dev->mtu > ETH_DATA_LEN))
|
|
tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ;
|
|
|
|
/* Initialize invariants of the rings, we only set this
|
|
* stuff once. This works because the card does not
|
|
* write into the rx buffer posting rings.
|
|
*/
|
|
for (i = 0; i < TG3_RX_RING_SIZE; i++) {
|
|
struct tg3_rx_buffer_desc *rxd;
|
|
|
|
rxd = &tp->rx_std[i];
|
|
rxd->idx_len = (tp->rx_pkt_buf_sz - tp->rx_offset - 64)
|
|
<< RXD_LEN_SHIFT;
|
|
rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT);
|
|
rxd->opaque = (RXD_OPAQUE_RING_STD |
|
|
(i << RXD_OPAQUE_INDEX_SHIFT));
|
|
}
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
|
|
for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
|
|
struct tg3_rx_buffer_desc *rxd;
|
|
|
|
rxd = &tp->rx_jumbo[i];
|
|
rxd->idx_len = (RX_JUMBO_PKT_BUF_SZ - tp->rx_offset - 64)
|
|
<< RXD_LEN_SHIFT;
|
|
rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT) |
|
|
RXD_FLAG_JUMBO;
|
|
rxd->opaque = (RXD_OPAQUE_RING_JUMBO |
|
|
(i << RXD_OPAQUE_INDEX_SHIFT));
|
|
}
|
|
}
|
|
|
|
/* Now allocate fresh SKBs for each rx ring. */
|
|
for (i = 0; i < tp->rx_pending; i++) {
|
|
if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_STD, -1, i) < 0) {
|
|
printk(KERN_WARNING PFX
|
|
"%s: Using a smaller RX standard ring, "
|
|
"only %d out of %d buffers were allocated "
|
|
"successfully.\n",
|
|
tp->dev->name, i, tp->rx_pending);
|
|
if (i == 0)
|
|
return -ENOMEM;
|
|
tp->rx_pending = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
|
|
for (i = 0; i < tp->rx_jumbo_pending; i++) {
|
|
if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_JUMBO,
|
|
-1, i) < 0) {
|
|
printk(KERN_WARNING PFX
|
|
"%s: Using a smaller RX jumbo ring, "
|
|
"only %d out of %d buffers were "
|
|
"allocated successfully.\n",
|
|
tp->dev->name, i, tp->rx_jumbo_pending);
|
|
if (i == 0) {
|
|
tg3_free_rings(tp);
|
|
return -ENOMEM;
|
|
}
|
|
tp->rx_jumbo_pending = i;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Must not be invoked with interrupt sources disabled and
|
|
* the hardware shutdown down.
|
|
*/
|
|
static void tg3_free_consistent(struct tg3 *tp)
|
|
{
|
|
kfree(tp->rx_std_buffers);
|
|
tp->rx_std_buffers = NULL;
|
|
if (tp->rx_std) {
|
|
pci_free_consistent(tp->pdev, TG3_RX_RING_BYTES,
|
|
tp->rx_std, tp->rx_std_mapping);
|
|
tp->rx_std = NULL;
|
|
}
|
|
if (tp->rx_jumbo) {
|
|
pci_free_consistent(tp->pdev, TG3_RX_JUMBO_RING_BYTES,
|
|
tp->rx_jumbo, tp->rx_jumbo_mapping);
|
|
tp->rx_jumbo = NULL;
|
|
}
|
|
if (tp->rx_rcb) {
|
|
pci_free_consistent(tp->pdev, TG3_RX_RCB_RING_BYTES(tp),
|
|
tp->rx_rcb, tp->rx_rcb_mapping);
|
|
tp->rx_rcb = NULL;
|
|
}
|
|
if (tp->tx_ring) {
|
|
pci_free_consistent(tp->pdev, TG3_TX_RING_BYTES,
|
|
tp->tx_ring, tp->tx_desc_mapping);
|
|
tp->tx_ring = NULL;
|
|
}
|
|
if (tp->hw_status) {
|
|
pci_free_consistent(tp->pdev, TG3_HW_STATUS_SIZE,
|
|
tp->hw_status, tp->status_mapping);
|
|
tp->hw_status = NULL;
|
|
}
|
|
if (tp->hw_stats) {
|
|
pci_free_consistent(tp->pdev, sizeof(struct tg3_hw_stats),
|
|
tp->hw_stats, tp->stats_mapping);
|
|
tp->hw_stats = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Must not be invoked with interrupt sources disabled and
|
|
* the hardware shutdown down. Can sleep.
|
|
*/
|
|
static int tg3_alloc_consistent(struct tg3 *tp)
|
|
{
|
|
tp->rx_std_buffers = kzalloc((sizeof(struct ring_info) *
|
|
(TG3_RX_RING_SIZE +
|
|
TG3_RX_JUMBO_RING_SIZE)) +
|
|
(sizeof(struct tx_ring_info) *
|
|
TG3_TX_RING_SIZE),
|
|
GFP_KERNEL);
|
|
if (!tp->rx_std_buffers)
|
|
return -ENOMEM;
|
|
|
|
tp->rx_jumbo_buffers = &tp->rx_std_buffers[TG3_RX_RING_SIZE];
|
|
tp->tx_buffers = (struct tx_ring_info *)
|
|
&tp->rx_jumbo_buffers[TG3_RX_JUMBO_RING_SIZE];
|
|
|
|
tp->rx_std = pci_alloc_consistent(tp->pdev, TG3_RX_RING_BYTES,
|
|
&tp->rx_std_mapping);
|
|
if (!tp->rx_std)
|
|
goto err_out;
|
|
|
|
tp->rx_jumbo = pci_alloc_consistent(tp->pdev, TG3_RX_JUMBO_RING_BYTES,
|
|
&tp->rx_jumbo_mapping);
|
|
|
|
if (!tp->rx_jumbo)
|
|
goto err_out;
|
|
|
|
tp->rx_rcb = pci_alloc_consistent(tp->pdev, TG3_RX_RCB_RING_BYTES(tp),
|
|
&tp->rx_rcb_mapping);
|
|
if (!tp->rx_rcb)
|
|
goto err_out;
|
|
|
|
tp->tx_ring = pci_alloc_consistent(tp->pdev, TG3_TX_RING_BYTES,
|
|
&tp->tx_desc_mapping);
|
|
if (!tp->tx_ring)
|
|
goto err_out;
|
|
|
|
tp->hw_status = pci_alloc_consistent(tp->pdev,
|
|
TG3_HW_STATUS_SIZE,
|
|
&tp->status_mapping);
|
|
if (!tp->hw_status)
|
|
goto err_out;
|
|
|
|
tp->hw_stats = pci_alloc_consistent(tp->pdev,
|
|
sizeof(struct tg3_hw_stats),
|
|
&tp->stats_mapping);
|
|
if (!tp->hw_stats)
|
|
goto err_out;
|
|
|
|
memset(tp->hw_status, 0, TG3_HW_STATUS_SIZE);
|
|
memset(tp->hw_stats, 0, sizeof(struct tg3_hw_stats));
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
tg3_free_consistent(tp);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
#define MAX_WAIT_CNT 1000
|
|
|
|
/* To stop a block, clear the enable bit and poll till it
|
|
* clears. tp->lock is held.
|
|
*/
|
|
static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, int silent)
|
|
{
|
|
unsigned int i;
|
|
u32 val;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
|
|
switch (ofs) {
|
|
case RCVLSC_MODE:
|
|
case DMAC_MODE:
|
|
case MBFREE_MODE:
|
|
case BUFMGR_MODE:
|
|
case MEMARB_MODE:
|
|
/* We can't enable/disable these bits of the
|
|
* 5705/5750, just say success.
|
|
*/
|
|
return 0;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
val = tr32(ofs);
|
|
val &= ~enable_bit;
|
|
tw32_f(ofs, val);
|
|
|
|
for (i = 0; i < MAX_WAIT_CNT; i++) {
|
|
udelay(100);
|
|
val = tr32(ofs);
|
|
if ((val & enable_bit) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i == MAX_WAIT_CNT && !silent) {
|
|
printk(KERN_ERR PFX "tg3_stop_block timed out, "
|
|
"ofs=%lx enable_bit=%x\n",
|
|
ofs, enable_bit);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_abort_hw(struct tg3 *tp, int silent)
|
|
{
|
|
int i, err;
|
|
|
|
tg3_disable_ints(tp);
|
|
|
|
tp->rx_mode &= ~RX_MODE_ENABLE;
|
|
tw32_f(MAC_RX_MODE, tp->rx_mode);
|
|
udelay(10);
|
|
|
|
err = tg3_stop_block(tp, RCVBDI_MODE, RCVBDI_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, RCVLPC_MODE, RCVLPC_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, RCVLSC_MODE, RCVLSC_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, RCVDBDI_MODE, RCVDBDI_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, RCVDCC_MODE, RCVDCC_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, RCVCC_MODE, RCVCC_MODE_ENABLE, silent);
|
|
|
|
err |= tg3_stop_block(tp, SNDBDS_MODE, SNDBDS_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, SNDBDI_MODE, SNDBDI_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, SNDDATAI_MODE, SNDDATAI_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, RDMAC_MODE, RDMAC_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, SNDDATAC_MODE, SNDDATAC_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, DMAC_MODE, DMAC_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, SNDBDC_MODE, SNDBDC_MODE_ENABLE, silent);
|
|
|
|
tp->mac_mode &= ~MAC_MODE_TDE_ENABLE;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
|
|
tp->tx_mode &= ~TX_MODE_ENABLE;
|
|
tw32_f(MAC_TX_MODE, tp->tx_mode);
|
|
|
|
for (i = 0; i < MAX_WAIT_CNT; i++) {
|
|
udelay(100);
|
|
if (!(tr32(MAC_TX_MODE) & TX_MODE_ENABLE))
|
|
break;
|
|
}
|
|
if (i >= MAX_WAIT_CNT) {
|
|
printk(KERN_ERR PFX "tg3_abort_hw timed out for %s, "
|
|
"TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
|
|
tp->dev->name, tr32(MAC_TX_MODE));
|
|
err |= -ENODEV;
|
|
}
|
|
|
|
err |= tg3_stop_block(tp, HOSTCC_MODE, HOSTCC_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, WDMAC_MODE, WDMAC_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, MBFREE_MODE, MBFREE_MODE_ENABLE, silent);
|
|
|
|
tw32(FTQ_RESET, 0xffffffff);
|
|
tw32(FTQ_RESET, 0x00000000);
|
|
|
|
err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE, silent);
|
|
err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE, silent);
|
|
|
|
if (tp->hw_status)
|
|
memset(tp->hw_status, 0, TG3_HW_STATUS_SIZE);
|
|
if (tp->hw_stats)
|
|
memset(tp->hw_stats, 0, sizeof(struct tg3_hw_stats));
|
|
|
|
return err;
|
|
}
|
|
|
|
static void tg3_ape_send_event(struct tg3 *tp, u32 event)
|
|
{
|
|
int i;
|
|
u32 apedata;
|
|
|
|
apedata = tg3_ape_read32(tp, TG3_APE_SEG_SIG);
|
|
if (apedata != APE_SEG_SIG_MAGIC)
|
|
return;
|
|
|
|
apedata = tg3_ape_read32(tp, TG3_APE_FW_STATUS);
|
|
if (!(apedata & APE_FW_STATUS_READY))
|
|
return;
|
|
|
|
/* Wait for up to 1 millisecond for APE to service previous event. */
|
|
for (i = 0; i < 10; i++) {
|
|
if (tg3_ape_lock(tp, TG3_APE_LOCK_MEM))
|
|
return;
|
|
|
|
apedata = tg3_ape_read32(tp, TG3_APE_EVENT_STATUS);
|
|
|
|
if (!(apedata & APE_EVENT_STATUS_EVENT_PENDING))
|
|
tg3_ape_write32(tp, TG3_APE_EVENT_STATUS,
|
|
event | APE_EVENT_STATUS_EVENT_PENDING);
|
|
|
|
tg3_ape_unlock(tp, TG3_APE_LOCK_MEM);
|
|
|
|
if (!(apedata & APE_EVENT_STATUS_EVENT_PENDING))
|
|
break;
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
if (!(apedata & APE_EVENT_STATUS_EVENT_PENDING))
|
|
tg3_ape_write32(tp, TG3_APE_EVENT, APE_EVENT_1);
|
|
}
|
|
|
|
static void tg3_ape_driver_state_change(struct tg3 *tp, int kind)
|
|
{
|
|
u32 event;
|
|
u32 apedata;
|
|
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
|
|
return;
|
|
|
|
switch (kind) {
|
|
case RESET_KIND_INIT:
|
|
tg3_ape_write32(tp, TG3_APE_HOST_SEG_SIG,
|
|
APE_HOST_SEG_SIG_MAGIC);
|
|
tg3_ape_write32(tp, TG3_APE_HOST_SEG_LEN,
|
|
APE_HOST_SEG_LEN_MAGIC);
|
|
apedata = tg3_ape_read32(tp, TG3_APE_HOST_INIT_COUNT);
|
|
tg3_ape_write32(tp, TG3_APE_HOST_INIT_COUNT, ++apedata);
|
|
tg3_ape_write32(tp, TG3_APE_HOST_DRIVER_ID,
|
|
APE_HOST_DRIVER_ID_MAGIC);
|
|
tg3_ape_write32(tp, TG3_APE_HOST_BEHAVIOR,
|
|
APE_HOST_BEHAV_NO_PHYLOCK);
|
|
|
|
event = APE_EVENT_STATUS_STATE_START;
|
|
break;
|
|
case RESET_KIND_SHUTDOWN:
|
|
/* With the interface we are currently using,
|
|
* APE does not track driver state. Wiping
|
|
* out the HOST SEGMENT SIGNATURE forces
|
|
* the APE to assume OS absent status.
|
|
*/
|
|
tg3_ape_write32(tp, TG3_APE_HOST_SEG_SIG, 0x0);
|
|
|
|
event = APE_EVENT_STATUS_STATE_UNLOAD;
|
|
break;
|
|
case RESET_KIND_SUSPEND:
|
|
event = APE_EVENT_STATUS_STATE_SUSPEND;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
event |= APE_EVENT_STATUS_DRIVER_EVNT | APE_EVENT_STATUS_STATE_CHNGE;
|
|
|
|
tg3_ape_send_event(tp, event);
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind)
|
|
{
|
|
tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
|
|
NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
|
|
switch (kind) {
|
|
case RESET_KIND_INIT:
|
|
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
|
|
DRV_STATE_START);
|
|
break;
|
|
|
|
case RESET_KIND_SHUTDOWN:
|
|
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
|
|
DRV_STATE_UNLOAD);
|
|
break;
|
|
|
|
case RESET_KIND_SUSPEND:
|
|
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
|
|
DRV_STATE_SUSPEND);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (kind == RESET_KIND_INIT ||
|
|
kind == RESET_KIND_SUSPEND)
|
|
tg3_ape_driver_state_change(tp, kind);
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_write_sig_post_reset(struct tg3 *tp, int kind)
|
|
{
|
|
if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
|
|
switch (kind) {
|
|
case RESET_KIND_INIT:
|
|
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
|
|
DRV_STATE_START_DONE);
|
|
break;
|
|
|
|
case RESET_KIND_SHUTDOWN:
|
|
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
|
|
DRV_STATE_UNLOAD_DONE);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (kind == RESET_KIND_SHUTDOWN)
|
|
tg3_ape_driver_state_change(tp, kind);
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_write_sig_legacy(struct tg3 *tp, int kind)
|
|
{
|
|
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
|
|
switch (kind) {
|
|
case RESET_KIND_INIT:
|
|
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
|
|
DRV_STATE_START);
|
|
break;
|
|
|
|
case RESET_KIND_SHUTDOWN:
|
|
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
|
|
DRV_STATE_UNLOAD);
|
|
break;
|
|
|
|
case RESET_KIND_SUSPEND:
|
|
tg3_write_mem(tp, NIC_SRAM_FW_DRV_STATE_MBOX,
|
|
DRV_STATE_SUSPEND);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int tg3_poll_fw(struct tg3 *tp)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
/* Wait up to 20ms for init done. */
|
|
for (i = 0; i < 200; i++) {
|
|
if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE)
|
|
return 0;
|
|
udelay(100);
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Wait for firmware initialization to complete. */
|
|
for (i = 0; i < 100000; i++) {
|
|
tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
|
|
if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
/* Chip might not be fitted with firmware. Some Sun onboard
|
|
* parts are configured like that. So don't signal the timeout
|
|
* of the above loop as an error, but do report the lack of
|
|
* running firmware once.
|
|
*/
|
|
if (i >= 100000 &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
|
|
tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
|
|
|
|
printk(KERN_INFO PFX "%s: No firmware running.\n",
|
|
tp->dev->name);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Save PCI command register before chip reset */
|
|
static void tg3_save_pci_state(struct tg3 *tp)
|
|
{
|
|
pci_read_config_word(tp->pdev, PCI_COMMAND, &tp->pci_cmd);
|
|
}
|
|
|
|
/* Restore PCI state after chip reset */
|
|
static void tg3_restore_pci_state(struct tg3 *tp)
|
|
{
|
|
u32 val;
|
|
|
|
/* Re-enable indirect register accesses. */
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
|
|
tp->misc_host_ctrl);
|
|
|
|
/* Set MAX PCI retry to zero. */
|
|
val = (PCISTATE_ROM_ENABLE | PCISTATE_ROM_RETRY_ENABLE);
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
|
|
(tp->tg3_flags & TG3_FLAG_PCIX_MODE))
|
|
val |= PCISTATE_RETRY_SAME_DMA;
|
|
/* Allow reads and writes to the APE register and memory space. */
|
|
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
|
|
val |= PCISTATE_ALLOW_APE_CTLSPC_WR |
|
|
PCISTATE_ALLOW_APE_SHMEM_WR;
|
|
pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, val);
|
|
|
|
pci_write_config_word(tp->pdev, PCI_COMMAND, tp->pci_cmd);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785) {
|
|
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
|
|
pcie_set_readrq(tp->pdev, 4096);
|
|
else {
|
|
pci_write_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
|
|
tp->pci_cacheline_sz);
|
|
pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER,
|
|
tp->pci_lat_timer);
|
|
}
|
|
}
|
|
|
|
/* Make sure PCI-X relaxed ordering bit is clear. */
|
|
if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
|
|
u16 pcix_cmd;
|
|
|
|
pci_read_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD,
|
|
&pcix_cmd);
|
|
pcix_cmd &= ~PCI_X_CMD_ERO;
|
|
pci_write_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD,
|
|
pcix_cmd);
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
|
|
|
|
/* Chip reset on 5780 will reset MSI enable bit,
|
|
* so need to restore it.
|
|
*/
|
|
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
|
|
u16 ctrl;
|
|
|
|
pci_read_config_word(tp->pdev,
|
|
tp->msi_cap + PCI_MSI_FLAGS,
|
|
&ctrl);
|
|
pci_write_config_word(tp->pdev,
|
|
tp->msi_cap + PCI_MSI_FLAGS,
|
|
ctrl | PCI_MSI_FLAGS_ENABLE);
|
|
val = tr32(MSGINT_MODE);
|
|
tw32(MSGINT_MODE, val | MSGINT_MODE_ENABLE);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void tg3_stop_fw(struct tg3 *);
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_chip_reset(struct tg3 *tp)
|
|
{
|
|
u32 val;
|
|
void (*write_op)(struct tg3 *, u32, u32);
|
|
int err;
|
|
|
|
tg3_nvram_lock(tp);
|
|
|
|
tg3_mdio_stop(tp);
|
|
|
|
tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
|
|
|
|
/* No matching tg3_nvram_unlock() after this because
|
|
* chip reset below will undo the nvram lock.
|
|
*/
|
|
tp->nvram_lock_cnt = 0;
|
|
|
|
/* GRC_MISC_CFG core clock reset will clear the memory
|
|
* enable bit in PCI register 4 and the MSI enable bit
|
|
* on some chips, so we save relevant registers here.
|
|
*/
|
|
tg3_save_pci_state(tp);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
|
|
(tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
|
|
tw32(GRC_FASTBOOT_PC, 0);
|
|
|
|
/*
|
|
* We must avoid the readl() that normally takes place.
|
|
* It locks machines, causes machine checks, and other
|
|
* fun things. So, temporarily disable the 5701
|
|
* hardware workaround, while we do the reset.
|
|
*/
|
|
write_op = tp->write32;
|
|
if (write_op == tg3_write_flush_reg32)
|
|
tp->write32 = tg3_write32;
|
|
|
|
/* Prevent the irq handler from reading or writing PCI registers
|
|
* during chip reset when the memory enable bit in the PCI command
|
|
* register may be cleared. The chip does not generate interrupt
|
|
* at this time, but the irq handler may still be called due to irq
|
|
* sharing or irqpoll.
|
|
*/
|
|
tp->tg3_flags |= TG3_FLAG_CHIP_RESETTING;
|
|
if (tp->hw_status) {
|
|
tp->hw_status->status = 0;
|
|
tp->hw_status->status_tag = 0;
|
|
}
|
|
tp->last_tag = 0;
|
|
tp->last_irq_tag = 0;
|
|
smp_mb();
|
|
synchronize_irq(tp->pdev->irq);
|
|
|
|
/* do the reset */
|
|
val = GRC_MISC_CFG_CORECLK_RESET;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
|
|
if (tr32(0x7e2c) == 0x60) {
|
|
tw32(0x7e2c, 0x20);
|
|
}
|
|
if (tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) {
|
|
tw32(GRC_MISC_CFG, (1 << 29));
|
|
val |= (1 << 29);
|
|
}
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
tw32(VCPU_STATUS, tr32(VCPU_STATUS) | VCPU_STATUS_DRV_RESET);
|
|
tw32(GRC_VCPU_EXT_CTRL,
|
|
tr32(GRC_VCPU_EXT_CTRL) & ~GRC_VCPU_EXT_CTRL_HALT_CPU);
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
|
|
val |= GRC_MISC_CFG_KEEP_GPHY_POWER;
|
|
tw32(GRC_MISC_CFG, val);
|
|
|
|
/* restore 5701 hardware bug workaround write method */
|
|
tp->write32 = write_op;
|
|
|
|
/* Unfortunately, we have to delay before the PCI read back.
|
|
* Some 575X chips even will not respond to a PCI cfg access
|
|
* when the reset command is given to the chip.
|
|
*
|
|
* How do these hardware designers expect things to work
|
|
* properly if the PCI write is posted for a long period
|
|
* of time? It is always necessary to have some method by
|
|
* which a register read back can occur to push the write
|
|
* out which does the reset.
|
|
*
|
|
* For most tg3 variants the trick below was working.
|
|
* Ho hum...
|
|
*/
|
|
udelay(120);
|
|
|
|
/* Flush PCI posted writes. The normal MMIO registers
|
|
* are inaccessible at this time so this is the only
|
|
* way to make this reliably (actually, this is no longer
|
|
* the case, see above). I tried to use indirect
|
|
* register read/write but this upset some 5701 variants.
|
|
*/
|
|
pci_read_config_dword(tp->pdev, PCI_COMMAND, &val);
|
|
|
|
udelay(120);
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && tp->pcie_cap) {
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A0) {
|
|
int i;
|
|
u32 cfg_val;
|
|
|
|
/* Wait for link training to complete. */
|
|
for (i = 0; i < 5000; i++)
|
|
udelay(100);
|
|
|
|
pci_read_config_dword(tp->pdev, 0xc4, &cfg_val);
|
|
pci_write_config_dword(tp->pdev, 0xc4,
|
|
cfg_val | (1 << 15));
|
|
}
|
|
|
|
/* Set PCIE max payload size to 128 bytes and
|
|
* clear the "no snoop" and "relaxed ordering" bits.
|
|
*/
|
|
pci_write_config_word(tp->pdev,
|
|
tp->pcie_cap + PCI_EXP_DEVCTL,
|
|
0);
|
|
|
|
pcie_set_readrq(tp->pdev, 4096);
|
|
|
|
/* Clear error status */
|
|
pci_write_config_word(tp->pdev,
|
|
tp->pcie_cap + PCI_EXP_DEVSTA,
|
|
PCI_EXP_DEVSTA_CED |
|
|
PCI_EXP_DEVSTA_NFED |
|
|
PCI_EXP_DEVSTA_FED |
|
|
PCI_EXP_DEVSTA_URD);
|
|
}
|
|
|
|
tg3_restore_pci_state(tp);
|
|
|
|
tp->tg3_flags &= ~TG3_FLAG_CHIP_RESETTING;
|
|
|
|
val = 0;
|
|
if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
|
|
val = tr32(MEMARB_MODE);
|
|
tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
|
|
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A3) {
|
|
tg3_stop_fw(tp);
|
|
tw32(0x5000, 0x400);
|
|
}
|
|
|
|
tw32(GRC_MODE, tp->grc_mode);
|
|
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
|
|
val = tr32(0xc4);
|
|
|
|
tw32(0xc4, val | (1 << 15));
|
|
}
|
|
|
|
if ((tp->nic_sram_data_cfg & NIC_SRAM_DATA_CFG_MINI_PCI) != 0 &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
|
|
tp->pci_clock_ctrl |= CLOCK_CTRL_CLKRUN_OENABLE;
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0)
|
|
tp->pci_clock_ctrl |= CLOCK_CTRL_FORCE_CLKRUN;
|
|
tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
|
|
tp->mac_mode = MAC_MODE_PORT_MODE_TBI;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
|
|
tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
} else if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
|
|
tp->mac_mode &= (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
|
|
if (tp->mac_mode & MAC_MODE_APE_TX_EN)
|
|
tp->mac_mode |= MAC_MODE_TDE_ENABLE;
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
} else
|
|
tw32_f(MAC_MODE, 0);
|
|
udelay(40);
|
|
|
|
tg3_mdio_start(tp);
|
|
|
|
tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
|
|
|
|
err = tg3_poll_fw(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
|
|
tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) {
|
|
val = tr32(0x7c00);
|
|
|
|
tw32(0x7c00, val | (1 << 25));
|
|
}
|
|
|
|
/* Reprobe ASF enable state. */
|
|
tp->tg3_flags &= ~TG3_FLAG_ENABLE_ASF;
|
|
tp->tg3_flags2 &= ~TG3_FLG2_ASF_NEW_HANDSHAKE;
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
|
|
if (val == NIC_SRAM_DATA_SIG_MAGIC) {
|
|
u32 nic_cfg;
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
|
|
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
|
|
tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
|
|
tp->last_event_jiffies = jiffies;
|
|
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
|
|
tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_stop_fw(struct tg3 *tp)
|
|
{
|
|
if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
|
|
!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
|
|
/* Wait for RX cpu to ACK the previous event. */
|
|
tg3_wait_for_event_ack(tp);
|
|
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_PAUSE_FW);
|
|
|
|
tg3_generate_fw_event(tp);
|
|
|
|
/* Wait for RX cpu to ACK this event. */
|
|
tg3_wait_for_event_ack(tp);
|
|
}
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_halt(struct tg3 *tp, int kind, int silent)
|
|
{
|
|
int err;
|
|
|
|
tg3_stop_fw(tp);
|
|
|
|
tg3_write_sig_pre_reset(tp, kind);
|
|
|
|
tg3_abort_hw(tp, silent);
|
|
err = tg3_chip_reset(tp);
|
|
|
|
__tg3_set_mac_addr(tp, 0);
|
|
|
|
tg3_write_sig_legacy(tp, kind);
|
|
tg3_write_sig_post_reset(tp, kind);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define RX_CPU_SCRATCH_BASE 0x30000
|
|
#define RX_CPU_SCRATCH_SIZE 0x04000
|
|
#define TX_CPU_SCRATCH_BASE 0x34000
|
|
#define TX_CPU_SCRATCH_SIZE 0x04000
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
|
|
{
|
|
int i;
|
|
|
|
BUG_ON(offset == TX_CPU_BASE &&
|
|
(tp->tg3_flags2 & TG3_FLG2_5705_PLUS));
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
u32 val = tr32(GRC_VCPU_EXT_CTRL);
|
|
|
|
tw32(GRC_VCPU_EXT_CTRL, val | GRC_VCPU_EXT_CTRL_HALT_CPU);
|
|
return 0;
|
|
}
|
|
if (offset == RX_CPU_BASE) {
|
|
for (i = 0; i < 10000; i++) {
|
|
tw32(offset + CPU_STATE, 0xffffffff);
|
|
tw32(offset + CPU_MODE, CPU_MODE_HALT);
|
|
if (tr32(offset + CPU_MODE) & CPU_MODE_HALT)
|
|
break;
|
|
}
|
|
|
|
tw32(offset + CPU_STATE, 0xffffffff);
|
|
tw32_f(offset + CPU_MODE, CPU_MODE_HALT);
|
|
udelay(10);
|
|
} else {
|
|
for (i = 0; i < 10000; i++) {
|
|
tw32(offset + CPU_STATE, 0xffffffff);
|
|
tw32(offset + CPU_MODE, CPU_MODE_HALT);
|
|
if (tr32(offset + CPU_MODE) & CPU_MODE_HALT)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i >= 10000) {
|
|
printk(KERN_ERR PFX "tg3_reset_cpu timed out for %s, "
|
|
"and %s CPU\n",
|
|
tp->dev->name,
|
|
(offset == RX_CPU_BASE ? "RX" : "TX"));
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Clear firmware's nvram arbitration. */
|
|
if (tp->tg3_flags & TG3_FLAG_NVRAM)
|
|
tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
|
|
return 0;
|
|
}
|
|
|
|
struct fw_info {
|
|
unsigned int fw_base;
|
|
unsigned int fw_len;
|
|
const __be32 *fw_data;
|
|
};
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_base,
|
|
int cpu_scratch_size, struct fw_info *info)
|
|
{
|
|
int err, lock_err, i;
|
|
void (*write_op)(struct tg3 *, u32, u32);
|
|
|
|
if (cpu_base == TX_CPU_BASE &&
|
|
(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
printk(KERN_ERR PFX "tg3_load_firmware_cpu: Trying to load "
|
|
"TX cpu firmware on %s which is 5705.\n",
|
|
tp->dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
|
|
write_op = tg3_write_mem;
|
|
else
|
|
write_op = tg3_write_indirect_reg32;
|
|
|
|
/* It is possible that bootcode is still loading at this point.
|
|
* Get the nvram lock first before halting the cpu.
|
|
*/
|
|
lock_err = tg3_nvram_lock(tp);
|
|
err = tg3_halt_cpu(tp, cpu_base);
|
|
if (!lock_err)
|
|
tg3_nvram_unlock(tp);
|
|
if (err)
|
|
goto out;
|
|
|
|
for (i = 0; i < cpu_scratch_size; i += sizeof(u32))
|
|
write_op(tp, cpu_scratch_base + i, 0);
|
|
tw32(cpu_base + CPU_STATE, 0xffffffff);
|
|
tw32(cpu_base + CPU_MODE, tr32(cpu_base+CPU_MODE)|CPU_MODE_HALT);
|
|
for (i = 0; i < (info->fw_len / sizeof(u32)); i++)
|
|
write_op(tp, (cpu_scratch_base +
|
|
(info->fw_base & 0xffff) +
|
|
(i * sizeof(u32))),
|
|
be32_to_cpu(info->fw_data[i]));
|
|
|
|
err = 0;
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_load_5701_a0_firmware_fix(struct tg3 *tp)
|
|
{
|
|
struct fw_info info;
|
|
const __be32 *fw_data;
|
|
int err, i;
|
|
|
|
fw_data = (void *)tp->fw->data;
|
|
|
|
/* Firmware blob starts with version numbers, followed by
|
|
start address and length. We are setting complete length.
|
|
length = end_address_of_bss - start_address_of_text.
|
|
Remainder is the blob to be loaded contiguously
|
|
from start address. */
|
|
|
|
info.fw_base = be32_to_cpu(fw_data[1]);
|
|
info.fw_len = tp->fw->size - 12;
|
|
info.fw_data = &fw_data[3];
|
|
|
|
err = tg3_load_firmware_cpu(tp, RX_CPU_BASE,
|
|
RX_CPU_SCRATCH_BASE, RX_CPU_SCRATCH_SIZE,
|
|
&info);
|
|
if (err)
|
|
return err;
|
|
|
|
err = tg3_load_firmware_cpu(tp, TX_CPU_BASE,
|
|
TX_CPU_SCRATCH_BASE, TX_CPU_SCRATCH_SIZE,
|
|
&info);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Now startup only the RX cpu. */
|
|
tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
|
|
tw32_f(RX_CPU_BASE + CPU_PC, info.fw_base);
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
if (tr32(RX_CPU_BASE + CPU_PC) == info.fw_base)
|
|
break;
|
|
tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
|
|
tw32(RX_CPU_BASE + CPU_MODE, CPU_MODE_HALT);
|
|
tw32_f(RX_CPU_BASE + CPU_PC, info.fw_base);
|
|
udelay(1000);
|
|
}
|
|
if (i >= 5) {
|
|
printk(KERN_ERR PFX "tg3_load_firmware fails for %s "
|
|
"to set RX CPU PC, is %08x should be %08x\n",
|
|
tp->dev->name, tr32(RX_CPU_BASE + CPU_PC),
|
|
info.fw_base);
|
|
return -ENODEV;
|
|
}
|
|
tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
|
|
tw32_f(RX_CPU_BASE + CPU_MODE, 0x00000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* 5705 needs a special version of the TSO firmware. */
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_load_tso_firmware(struct tg3 *tp)
|
|
{
|
|
struct fw_info info;
|
|
const __be32 *fw_data;
|
|
unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
|
|
int err, i;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
|
|
return 0;
|
|
|
|
fw_data = (void *)tp->fw->data;
|
|
|
|
/* Firmware blob starts with version numbers, followed by
|
|
start address and length. We are setting complete length.
|
|
length = end_address_of_bss - start_address_of_text.
|
|
Remainder is the blob to be loaded contiguously
|
|
from start address. */
|
|
|
|
info.fw_base = be32_to_cpu(fw_data[1]);
|
|
cpu_scratch_size = tp->fw_len;
|
|
info.fw_len = tp->fw->size - 12;
|
|
info.fw_data = &fw_data[3];
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
|
|
cpu_base = RX_CPU_BASE;
|
|
cpu_scratch_base = NIC_SRAM_MBUF_POOL_BASE5705;
|
|
} else {
|
|
cpu_base = TX_CPU_BASE;
|
|
cpu_scratch_base = TX_CPU_SCRATCH_BASE;
|
|
cpu_scratch_size = TX_CPU_SCRATCH_SIZE;
|
|
}
|
|
|
|
err = tg3_load_firmware_cpu(tp, cpu_base,
|
|
cpu_scratch_base, cpu_scratch_size,
|
|
&info);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Now startup the cpu. */
|
|
tw32(cpu_base + CPU_STATE, 0xffffffff);
|
|
tw32_f(cpu_base + CPU_PC, info.fw_base);
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
if (tr32(cpu_base + CPU_PC) == info.fw_base)
|
|
break;
|
|
tw32(cpu_base + CPU_STATE, 0xffffffff);
|
|
tw32(cpu_base + CPU_MODE, CPU_MODE_HALT);
|
|
tw32_f(cpu_base + CPU_PC, info.fw_base);
|
|
udelay(1000);
|
|
}
|
|
if (i >= 5) {
|
|
printk(KERN_ERR PFX "tg3_load_tso_firmware fails for %s "
|
|
"to set CPU PC, is %08x should be %08x\n",
|
|
tp->dev->name, tr32(cpu_base + CPU_PC),
|
|
info.fw_base);
|
|
return -ENODEV;
|
|
}
|
|
tw32(cpu_base + CPU_STATE, 0xffffffff);
|
|
tw32_f(cpu_base + CPU_MODE, 0x00000000);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int tg3_set_mac_addr(struct net_device *dev, void *p)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
struct sockaddr *addr = p;
|
|
int err = 0, skip_mac_1 = 0;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EINVAL;
|
|
|
|
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
|
|
u32 addr0_high, addr0_low, addr1_high, addr1_low;
|
|
|
|
addr0_high = tr32(MAC_ADDR_0_HIGH);
|
|
addr0_low = tr32(MAC_ADDR_0_LOW);
|
|
addr1_high = tr32(MAC_ADDR_1_HIGH);
|
|
addr1_low = tr32(MAC_ADDR_1_LOW);
|
|
|
|
/* Skip MAC addr 1 if ASF is using it. */
|
|
if ((addr0_high != addr1_high || addr0_low != addr1_low) &&
|
|
!(addr1_high == 0 && addr1_low == 0))
|
|
skip_mac_1 = 1;
|
|
}
|
|
spin_lock_bh(&tp->lock);
|
|
__tg3_set_mac_addr(tp, skip_mac_1);
|
|
spin_unlock_bh(&tp->lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static void tg3_set_bdinfo(struct tg3 *tp, u32 bdinfo_addr,
|
|
dma_addr_t mapping, u32 maxlen_flags,
|
|
u32 nic_addr)
|
|
{
|
|
tg3_write_mem(tp,
|
|
(bdinfo_addr + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH),
|
|
((u64) mapping >> 32));
|
|
tg3_write_mem(tp,
|
|
(bdinfo_addr + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW),
|
|
((u64) mapping & 0xffffffff));
|
|
tg3_write_mem(tp,
|
|
(bdinfo_addr + TG3_BDINFO_MAXLEN_FLAGS),
|
|
maxlen_flags);
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
|
|
tg3_write_mem(tp,
|
|
(bdinfo_addr + TG3_BDINFO_NIC_ADDR),
|
|
nic_addr);
|
|
}
|
|
|
|
static void __tg3_set_rx_mode(struct net_device *);
|
|
static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
|
|
{
|
|
tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
|
|
tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
|
|
tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
|
|
tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq);
|
|
tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq);
|
|
}
|
|
tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
|
|
tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
u32 val = ec->stats_block_coalesce_usecs;
|
|
|
|
if (!netif_carrier_ok(tp->dev))
|
|
val = 0;
|
|
|
|
tw32(HOSTCC_STAT_COAL_TICKS, val);
|
|
}
|
|
}
|
|
|
|
/* tp->lock is held. */
|
|
static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
|
|
{
|
|
u32 val, rdmac_mode;
|
|
int i, err, limit;
|
|
|
|
tg3_disable_ints(tp);
|
|
|
|
tg3_stop_fw(tp);
|
|
|
|
tg3_write_sig_pre_reset(tp, RESET_KIND_INIT);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) {
|
|
tg3_abort_hw(tp, 1);
|
|
}
|
|
|
|
if (reset_phy &&
|
|
!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB))
|
|
tg3_phy_reset(tp);
|
|
|
|
err = tg3_chip_reset(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
tg3_write_sig_legacy(tp, RESET_KIND_INIT);
|
|
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
|
|
val = tr32(TG3_CPMU_CTRL);
|
|
val &= ~(CPMU_CTRL_LINK_AWARE_MODE | CPMU_CTRL_LINK_IDLE_MODE);
|
|
tw32(TG3_CPMU_CTRL, val);
|
|
|
|
val = tr32(TG3_CPMU_LSPD_10MB_CLK);
|
|
val &= ~CPMU_LSPD_10MB_MACCLK_MASK;
|
|
val |= CPMU_LSPD_10MB_MACCLK_6_25;
|
|
tw32(TG3_CPMU_LSPD_10MB_CLK, val);
|
|
|
|
val = tr32(TG3_CPMU_LNK_AWARE_PWRMD);
|
|
val &= ~CPMU_LNK_AWARE_MACCLK_MASK;
|
|
val |= CPMU_LNK_AWARE_MACCLK_6_25;
|
|
tw32(TG3_CPMU_LNK_AWARE_PWRMD, val);
|
|
|
|
val = tr32(TG3_CPMU_HST_ACC);
|
|
val &= ~CPMU_HST_ACC_MACCLK_MASK;
|
|
val |= CPMU_HST_ACC_MACCLK_6_25;
|
|
tw32(TG3_CPMU_HST_ACC, val);
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
|
|
val = tr32(PCIE_PWR_MGMT_THRESH) & ~PCIE_PWR_MGMT_L1_THRESH_MSK;
|
|
val |= PCIE_PWR_MGMT_EXT_ASPM_TMR_EN |
|
|
PCIE_PWR_MGMT_L1_THRESH_4MS;
|
|
tw32(PCIE_PWR_MGMT_THRESH, val);
|
|
}
|
|
|
|
/* This works around an issue with Athlon chipsets on
|
|
* B3 tigon3 silicon. This bit has no effect on any
|
|
* other revision. But do not set this on PCI Express
|
|
* chips and don't even touch the clocks if the CPMU is present.
|
|
*/
|
|
if (!(tp->tg3_flags & TG3_FLAG_CPMU_PRESENT)) {
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
|
|
tp->pci_clock_ctrl |= CLOCK_CTRL_DELAY_PCI_GRANT;
|
|
tw32_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
|
|
}
|
|
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
|
|
(tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
|
|
val = tr32(TG3PCI_PCISTATE);
|
|
val |= PCISTATE_RETRY_SAME_DMA;
|
|
tw32(TG3PCI_PCISTATE, val);
|
|
}
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
|
|
/* Allow reads and writes to the
|
|
* APE register and memory space.
|
|
*/
|
|
val = tr32(TG3PCI_PCISTATE);
|
|
val |= PCISTATE_ALLOW_APE_CTLSPC_WR |
|
|
PCISTATE_ALLOW_APE_SHMEM_WR;
|
|
tw32(TG3PCI_PCISTATE, val);
|
|
}
|
|
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5704_BX) {
|
|
/* Enable some hw fixes. */
|
|
val = tr32(TG3PCI_MSI_DATA);
|
|
val |= (1 << 26) | (1 << 28) | (1 << 29);
|
|
tw32(TG3PCI_MSI_DATA, val);
|
|
}
|
|
|
|
/* Descriptor ring init may make accesses to the
|
|
* NIC SRAM area to setup the TX descriptors, so we
|
|
* can only do this after the hardware has been
|
|
* successfully reset.
|
|
*/
|
|
err = tg3_init_rings(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761) {
|
|
/* This value is determined during the probe time DMA
|
|
* engine test, tg3_test_dma.
|
|
*/
|
|
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
|
|
}
|
|
|
|
tp->grc_mode &= ~(GRC_MODE_HOST_SENDBDS |
|
|
GRC_MODE_4X_NIC_SEND_RINGS |
|
|
GRC_MODE_NO_TX_PHDR_CSUM |
|
|
GRC_MODE_NO_RX_PHDR_CSUM);
|
|
tp->grc_mode |= GRC_MODE_HOST_SENDBDS;
|
|
|
|
/* Pseudo-header checksum is done by hardware logic and not
|
|
* the offload processers, so make the chip do the pseudo-
|
|
* header checksums on receive. For transmit it is more
|
|
* convenient to do the pseudo-header checksum in software
|
|
* as Linux does that on transmit for us in all cases.
|
|
*/
|
|
tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
|
|
|
|
tw32(GRC_MODE,
|
|
tp->grc_mode |
|
|
(GRC_MODE_IRQ_ON_MAC_ATTN | GRC_MODE_HOST_STACKUP));
|
|
|
|
/* Setup the timer prescalar register. Clock is always 66Mhz. */
|
|
val = tr32(GRC_MISC_CFG);
|
|
val &= ~0xff;
|
|
val |= (65 << GRC_MISC_CFG_PRESCALAR_SHIFT);
|
|
tw32(GRC_MISC_CFG, val);
|
|
|
|
/* Initialize MBUF/DESC pool. */
|
|
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
|
|
/* Do nothing. */
|
|
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
|
|
tw32(BUFMGR_MB_POOL_ADDR, NIC_SRAM_MBUF_POOL_BASE);
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
|
|
tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE64);
|
|
else
|
|
tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE96);
|
|
tw32(BUFMGR_DMA_DESC_POOL_ADDR, NIC_SRAM_DMA_DESC_POOL_BASE);
|
|
tw32(BUFMGR_DMA_DESC_POOL_SIZE, NIC_SRAM_DMA_DESC_POOL_SIZE);
|
|
}
|
|
else if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
|
|
int fw_len;
|
|
|
|
fw_len = tp->fw_len;
|
|
fw_len = (fw_len + (0x80 - 1)) & ~(0x80 - 1);
|
|
tw32(BUFMGR_MB_POOL_ADDR,
|
|
NIC_SRAM_MBUF_POOL_BASE5705 + fw_len);
|
|
tw32(BUFMGR_MB_POOL_SIZE,
|
|
NIC_SRAM_MBUF_POOL_SIZE5705 - fw_len - 0xa00);
|
|
}
|
|
|
|
if (tp->dev->mtu <= ETH_DATA_LEN) {
|
|
tw32(BUFMGR_MB_RDMA_LOW_WATER,
|
|
tp->bufmgr_config.mbuf_read_dma_low_water);
|
|
tw32(BUFMGR_MB_MACRX_LOW_WATER,
|
|
tp->bufmgr_config.mbuf_mac_rx_low_water);
|
|
tw32(BUFMGR_MB_HIGH_WATER,
|
|
tp->bufmgr_config.mbuf_high_water);
|
|
} else {
|
|
tw32(BUFMGR_MB_RDMA_LOW_WATER,
|
|
tp->bufmgr_config.mbuf_read_dma_low_water_jumbo);
|
|
tw32(BUFMGR_MB_MACRX_LOW_WATER,
|
|
tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo);
|
|
tw32(BUFMGR_MB_HIGH_WATER,
|
|
tp->bufmgr_config.mbuf_high_water_jumbo);
|
|
}
|
|
tw32(BUFMGR_DMA_LOW_WATER,
|
|
tp->bufmgr_config.dma_low_water);
|
|
tw32(BUFMGR_DMA_HIGH_WATER,
|
|
tp->bufmgr_config.dma_high_water);
|
|
|
|
tw32(BUFMGR_MODE, BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE);
|
|
for (i = 0; i < 2000; i++) {
|
|
if (tr32(BUFMGR_MODE) & BUFMGR_MODE_ENABLE)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
if (i >= 2000) {
|
|
printk(KERN_ERR PFX "tg3_reset_hw cannot enable BUFMGR for %s.\n",
|
|
tp->dev->name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Setup replenish threshold. */
|
|
val = tp->rx_pending / 8;
|
|
if (val == 0)
|
|
val = 1;
|
|
else if (val > tp->rx_std_max_post)
|
|
val = tp->rx_std_max_post;
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5906_A1)
|
|
tw32(ISO_PKT_TX, (tr32(ISO_PKT_TX) & ~0x3) | 0x2);
|
|
|
|
if (val > (TG3_RX_INTERNAL_RING_SZ_5906 / 2))
|
|
val = TG3_RX_INTERNAL_RING_SZ_5906 / 2;
|
|
}
|
|
|
|
tw32(RCVBDI_STD_THRESH, val);
|
|
|
|
/* Initialize TG3_BDINFO's at:
|
|
* RCVDBDI_STD_BD: standard eth size rx ring
|
|
* RCVDBDI_JUMBO_BD: jumbo frame rx ring
|
|
* RCVDBDI_MINI_BD: small frame rx ring (??? does not work)
|
|
*
|
|
* like so:
|
|
* TG3_BDINFO_HOST_ADDR: high/low parts of DMA address of ring
|
|
* TG3_BDINFO_MAXLEN_FLAGS: (rx max buffer size << 16) |
|
|
* ring attribute flags
|
|
* TG3_BDINFO_NIC_ADDR: location of descriptors in nic SRAM
|
|
*
|
|
* Standard receive ring @ NIC_SRAM_RX_BUFFER_DESC, 512 entries.
|
|
* Jumbo receive ring @ NIC_SRAM_RX_JUMBO_BUFFER_DESC, 256 entries.
|
|
*
|
|
* The size of each ring is fixed in the firmware, but the location is
|
|
* configurable.
|
|
*/
|
|
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
|
|
((u64) tp->rx_std_mapping >> 32));
|
|
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
|
|
((u64) tp->rx_std_mapping & 0xffffffff));
|
|
tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
|
|
NIC_SRAM_RX_BUFFER_DESC);
|
|
|
|
/* Don't even try to program the JUMBO/MINI buffer descriptor
|
|
* configs on 5705.
|
|
*/
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
|
|
tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS,
|
|
RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT);
|
|
} else {
|
|
tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS,
|
|
RX_STD_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT);
|
|
|
|
tw32(RCVDBDI_MINI_BD + TG3_BDINFO_MAXLEN_FLAGS,
|
|
BDINFO_FLAGS_DISABLED);
|
|
|
|
/* Setup replenish threshold. */
|
|
tw32(RCVBDI_JUMBO_THRESH, tp->rx_jumbo_pending / 8);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
|
|
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
|
|
((u64) tp->rx_jumbo_mapping >> 32));
|
|
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
|
|
((u64) tp->rx_jumbo_mapping & 0xffffffff));
|
|
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
|
|
RX_JUMBO_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT);
|
|
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
|
|
NIC_SRAM_RX_JUMBO_BUFFER_DESC);
|
|
} else {
|
|
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
|
|
BDINFO_FLAGS_DISABLED);
|
|
}
|
|
|
|
}
|
|
|
|
/* There is only one send ring on 5705/5750, no need to explicitly
|
|
* disable the others.
|
|
*/
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
/* Clear out send RCB ring in SRAM. */
|
|
for (i = NIC_SRAM_SEND_RCB; i < NIC_SRAM_RCV_RET_RCB; i += TG3_BDINFO_SIZE)
|
|
tg3_write_mem(tp, i + TG3_BDINFO_MAXLEN_FLAGS,
|
|
BDINFO_FLAGS_DISABLED);
|
|
}
|
|
|
|
tp->tx_prod = 0;
|
|
tp->tx_cons = 0;
|
|
tw32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
|
|
tw32_tx_mbox(MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
|
|
|
|
tg3_set_bdinfo(tp, NIC_SRAM_SEND_RCB,
|
|
tp->tx_desc_mapping,
|
|
(TG3_TX_RING_SIZE <<
|
|
BDINFO_FLAGS_MAXLEN_SHIFT),
|
|
NIC_SRAM_TX_BUFFER_DESC);
|
|
|
|
/* There is only one receive return ring on 5705/5750, no need
|
|
* to explicitly disable the others.
|
|
*/
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
for (i = NIC_SRAM_RCV_RET_RCB; i < NIC_SRAM_STATS_BLK;
|
|
i += TG3_BDINFO_SIZE) {
|
|
tg3_write_mem(tp, i + TG3_BDINFO_MAXLEN_FLAGS,
|
|
BDINFO_FLAGS_DISABLED);
|
|
}
|
|
}
|
|
|
|
tp->rx_rcb_ptr = 0;
|
|
tw32_rx_mbox(MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW, 0);
|
|
|
|
tg3_set_bdinfo(tp, NIC_SRAM_RCV_RET_RCB,
|
|
tp->rx_rcb_mapping,
|
|
(TG3_RX_RCB_RING_SIZE(tp) <<
|
|
BDINFO_FLAGS_MAXLEN_SHIFT),
|
|
0);
|
|
|
|
tp->rx_std_ptr = tp->rx_pending;
|
|
tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
|
|
tp->rx_std_ptr);
|
|
|
|
tp->rx_jumbo_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
|
|
tp->rx_jumbo_pending : 0;
|
|
tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
|
|
tp->rx_jumbo_ptr);
|
|
|
|
/* Initialize MAC address and backoff seed. */
|
|
__tg3_set_mac_addr(tp, 0);
|
|
|
|
/* MTU + ethernet header + FCS + optional VLAN tag */
|
|
tw32(MAC_RX_MTU_SIZE,
|
|
tp->dev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN);
|
|
|
|
/* The slot time is changed by tg3_setup_phy if we
|
|
* run at gigabit with half duplex.
|
|
*/
|
|
tw32(MAC_TX_LENGTHS,
|
|
(2 << TX_LENGTHS_IPG_CRS_SHIFT) |
|
|
(6 << TX_LENGTHS_IPG_SHIFT) |
|
|
(32 << TX_LENGTHS_SLOT_TIME_SHIFT));
|
|
|
|
/* Receive rules. */
|
|
tw32(MAC_RCV_RULE_CFG, RCV_RULE_CFG_DEFAULT_CLASS);
|
|
tw32(RCVLPC_CONFIG, 0x0181);
|
|
|
|
/* Calculate RDMAC_MODE setting early, we need it to determine
|
|
* the RCVLPC_STATE_ENABLE mask.
|
|
*/
|
|
rdmac_mode = (RDMAC_MODE_ENABLE | RDMAC_MODE_TGTABORT_ENAB |
|
|
RDMAC_MODE_MSTABORT_ENAB | RDMAC_MODE_PARITYERR_ENAB |
|
|
RDMAC_MODE_ADDROFLOW_ENAB | RDMAC_MODE_FIFOOFLOW_ENAB |
|
|
RDMAC_MODE_FIFOURUN_ENAB | RDMAC_MODE_FIFOOREAD_ENAB |
|
|
RDMAC_MODE_LNGREAD_ENAB);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
rdmac_mode |= RDMAC_MODE_BD_SBD_CRPT_ENAB |
|
|
RDMAC_MODE_MBUF_RBD_CRPT_ENAB |
|
|
RDMAC_MODE_MBUF_SBD_CRPT_ENAB;
|
|
|
|
/* If statement applies to 5705 and 5750 PCI devices only */
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
|
|
tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)) {
|
|
if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
|
|
rdmac_mode |= RDMAC_MODE_FIFO_SIZE_128;
|
|
} else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
|
|
rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
|
|
}
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
|
|
rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
|
|
rdmac_mode |= RDMAC_MODE_IPV4_LSO_EN;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN;
|
|
|
|
/* Receive/send statistics. */
|
|
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
|
|
val = tr32(RCVLPC_STATS_ENABLE);
|
|
val &= ~RCVLPC_STATSENAB_DACK_FIX;
|
|
tw32(RCVLPC_STATS_ENABLE, val);
|
|
} else if ((rdmac_mode & RDMAC_MODE_FIFO_SIZE_128) &&
|
|
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
|
|
val = tr32(RCVLPC_STATS_ENABLE);
|
|
val &= ~RCVLPC_STATSENAB_LNGBRST_RFIX;
|
|
tw32(RCVLPC_STATS_ENABLE, val);
|
|
} else {
|
|
tw32(RCVLPC_STATS_ENABLE, 0xffffff);
|
|
}
|
|
tw32(RCVLPC_STATSCTRL, RCVLPC_STATSCTRL_ENABLE);
|
|
tw32(SNDDATAI_STATSENAB, 0xffffff);
|
|
tw32(SNDDATAI_STATSCTRL,
|
|
(SNDDATAI_SCTRL_ENABLE |
|
|
SNDDATAI_SCTRL_FASTUPD));
|
|
|
|
/* Setup host coalescing engine. */
|
|
tw32(HOSTCC_MODE, 0);
|
|
for (i = 0; i < 2000; i++) {
|
|
if (!(tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
__tg3_set_coalesce(tp, &tp->coal);
|
|
|
|
/* set status block DMA address */
|
|
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH,
|
|
((u64) tp->status_mapping >> 32));
|
|
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
|
|
((u64) tp->status_mapping & 0xffffffff));
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
/* Status/statistics block address. See tg3_timer,
|
|
* the tg3_periodic_fetch_stats call there, and
|
|
* tg3_get_stats to see how this works for 5705/5750 chips.
|
|
*/
|
|
tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH,
|
|
((u64) tp->stats_mapping >> 32));
|
|
tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
|
|
((u64) tp->stats_mapping & 0xffffffff));
|
|
tw32(HOSTCC_STATS_BLK_NIC_ADDR, NIC_SRAM_STATS_BLK);
|
|
tw32(HOSTCC_STATUS_BLK_NIC_ADDR, NIC_SRAM_STATUS_BLK);
|
|
}
|
|
|
|
tw32(HOSTCC_MODE, HOSTCC_MODE_ENABLE | tp->coalesce_mode);
|
|
|
|
tw32(RCVCC_MODE, RCVCC_MODE_ENABLE | RCVCC_MODE_ATTN_ENABLE);
|
|
tw32(RCVLPC_MODE, RCVLPC_MODE_ENABLE);
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
|
|
tw32(RCVLSC_MODE, RCVLSC_MODE_ENABLE | RCVLSC_MODE_ATTN_ENABLE);
|
|
|
|
/* Clear statistics/status block in chip, and status block in ram. */
|
|
for (i = NIC_SRAM_STATS_BLK;
|
|
i < NIC_SRAM_STATUS_BLK + TG3_HW_STATUS_SIZE;
|
|
i += sizeof(u32)) {
|
|
tg3_write_mem(tp, i, 0);
|
|
udelay(40);
|
|
}
|
|
memset(tp->hw_status, 0, TG3_HW_STATUS_SIZE);
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
|
|
/* reset to prevent losing 1st rx packet intermittently */
|
|
tw32_f(MAC_RX_MODE, RX_MODE_RESET);
|
|
udelay(10);
|
|
}
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
|
|
tp->mac_mode &= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
|
|
else
|
|
tp->mac_mode = 0;
|
|
tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
|
|
MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
|
|
tp->mac_mode |= MAC_MODE_LINK_POLARITY;
|
|
tw32_f(MAC_MODE, tp->mac_mode | MAC_MODE_RXSTAT_CLEAR | MAC_MODE_TXSTAT_CLEAR);
|
|
udelay(40);
|
|
|
|
/* tp->grc_local_ctrl is partially set up during tg3_get_invariants().
|
|
* If TG3_FLG2_IS_NIC is zero, we should read the
|
|
* register to preserve the GPIO settings for LOMs. The GPIOs,
|
|
* whether used as inputs or outputs, are set by boot code after
|
|
* reset.
|
|
*/
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_IS_NIC)) {
|
|
u32 gpio_mask;
|
|
|
|
gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE1 |
|
|
GRC_LCLCTRL_GPIO_OE2 | GRC_LCLCTRL_GPIO_OUTPUT0 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT1 | GRC_LCLCTRL_GPIO_OUTPUT2;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
|
|
gpio_mask |= GRC_LCLCTRL_GPIO_OE3 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT3;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
|
|
gpio_mask |= GRC_LCLCTRL_GPIO_UART_SEL;
|
|
|
|
tp->grc_local_ctrl &= ~gpio_mask;
|
|
tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask;
|
|
|
|
/* GPIO1 must be driven high for eeprom write protect */
|
|
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)
|
|
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT1);
|
|
}
|
|
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
|
|
udelay(100);
|
|
|
|
tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
tw32_f(DMAC_MODE, DMAC_MODE_ENABLE);
|
|
udelay(40);
|
|
}
|
|
|
|
val = (WDMAC_MODE_ENABLE | WDMAC_MODE_TGTABORT_ENAB |
|
|
WDMAC_MODE_MSTABORT_ENAB | WDMAC_MODE_PARITYERR_ENAB |
|
|
WDMAC_MODE_ADDROFLOW_ENAB | WDMAC_MODE_FIFOOFLOW_ENAB |
|
|
WDMAC_MODE_FIFOURUN_ENAB | WDMAC_MODE_FIFOOREAD_ENAB |
|
|
WDMAC_MODE_LNGREAD_ENAB);
|
|
|
|
/* If statement applies to 5705 and 5750 PCI devices only */
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
|
|
tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
|
|
if ((tp->tg3_flags & TG3_FLG2_TSO_CAPABLE) &&
|
|
(tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5705_A2)) {
|
|
/* nothing */
|
|
} else if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
|
|
val |= WDMAC_MODE_RX_ACCEL;
|
|
}
|
|
}
|
|
|
|
/* Enable host coalescing bug fix */
|
|
if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
|
|
val |= WDMAC_MODE_STATUS_TAG_FIX;
|
|
|
|
tw32_f(WDMAC_MODE, val);
|
|
udelay(40);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
|
|
u16 pcix_cmd;
|
|
|
|
pci_read_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD,
|
|
&pcix_cmd);
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) {
|
|
pcix_cmd &= ~PCI_X_CMD_MAX_READ;
|
|
pcix_cmd |= PCI_X_CMD_READ_2K;
|
|
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
|
|
pcix_cmd &= ~(PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ);
|
|
pcix_cmd |= PCI_X_CMD_READ_2K;
|
|
}
|
|
pci_write_config_word(tp->pdev, tp->pcix_cap + PCI_X_CMD,
|
|
pcix_cmd);
|
|
}
|
|
|
|
tw32_f(RDMAC_MODE, rdmac_mode);
|
|
udelay(40);
|
|
|
|
tw32(RCVDCC_MODE, RCVDCC_MODE_ENABLE | RCVDCC_MODE_ATTN_ENABLE);
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
|
|
tw32(MBFREE_MODE, MBFREE_MODE_ENABLE);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761)
|
|
tw32(SNDDATAC_MODE,
|
|
SNDDATAC_MODE_ENABLE | SNDDATAC_MODE_CDELAY);
|
|
else
|
|
tw32(SNDDATAC_MODE, SNDDATAC_MODE_ENABLE);
|
|
|
|
tw32(SNDBDC_MODE, SNDBDC_MODE_ENABLE | SNDBDC_MODE_ATTN_ENABLE);
|
|
tw32(RCVBDI_MODE, RCVBDI_MODE_ENABLE | RCVBDI_MODE_RCB_ATTN_ENAB);
|
|
tw32(RCVDBDI_MODE, RCVDBDI_MODE_ENABLE | RCVDBDI_MODE_INV_RING_SZ);
|
|
tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE);
|
|
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
|
|
tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE | 0x8);
|
|
tw32(SNDBDI_MODE, SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE);
|
|
tw32(SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE);
|
|
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
|
|
err = tg3_load_5701_a0_firmware_fix(tp);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
|
|
err = tg3_load_tso_firmware(tp);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
tp->tx_mode = TX_MODE_ENABLE;
|
|
tw32_f(MAC_TX_MODE, tp->tx_mode);
|
|
udelay(100);
|
|
|
|
tp->rx_mode = RX_MODE_ENABLE;
|
|
if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
|
|
tp->rx_mode |= RX_MODE_IPV6_CSUM_ENABLE;
|
|
|
|
tw32_f(MAC_RX_MODE, tp->rx_mode);
|
|
udelay(10);
|
|
|
|
tw32(MAC_LED_CTRL, tp->led_ctrl);
|
|
|
|
tw32(MAC_MI_STAT, MAC_MI_STAT_LNKSTAT_ATTN_ENAB);
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
|
|
tw32_f(MAC_RX_MODE, RX_MODE_RESET);
|
|
udelay(10);
|
|
}
|
|
tw32_f(MAC_RX_MODE, tp->rx_mode);
|
|
udelay(10);
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_SERDES_PREEMPHASIS)) {
|
|
/* Set drive transmission level to 1.2V */
|
|
/* only if the signal pre-emphasis bit is not set */
|
|
val = tr32(MAC_SERDES_CFG);
|
|
val &= 0xfffff000;
|
|
val |= 0x880;
|
|
tw32(MAC_SERDES_CFG, val);
|
|
}
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5703_A1)
|
|
tw32(MAC_SERDES_CFG, 0x616000);
|
|
}
|
|
|
|
/* Prevent chip from dropping frames when flow control
|
|
* is enabled.
|
|
*/
|
|
tw32_f(MAC_LOW_WMARK_MAX_RX_FRAME, 2);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
|
|
(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
|
|
/* Use hardware link auto-negotiation */
|
|
tp->tg3_flags2 |= TG3_FLG2_HW_AUTONEG;
|
|
}
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) &&
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714)) {
|
|
u32 tmp;
|
|
|
|
tmp = tr32(SERDES_RX_CTRL);
|
|
tw32(SERDES_RX_CTRL, tmp | SERDES_RX_SIG_DETECT);
|
|
tp->grc_local_ctrl &= ~GRC_LCLCTRL_USE_EXT_SIG_DETECT;
|
|
tp->grc_local_ctrl |= GRC_LCLCTRL_USE_SIG_DETECT;
|
|
tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
|
|
}
|
|
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
|
|
if (tp->link_config.phy_is_low_power) {
|
|
tp->link_config.phy_is_low_power = 0;
|
|
tp->link_config.speed = tp->link_config.orig_speed;
|
|
tp->link_config.duplex = tp->link_config.orig_duplex;
|
|
tp->link_config.autoneg = tp->link_config.orig_autoneg;
|
|
}
|
|
|
|
err = tg3_setup_phy(tp, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) {
|
|
u32 tmp;
|
|
|
|
/* Clear CRC stats. */
|
|
if (!tg3_readphy(tp, MII_TG3_TEST1, &tmp)) {
|
|
tg3_writephy(tp, MII_TG3_TEST1,
|
|
tmp | MII_TG3_TEST1_CRC_EN);
|
|
tg3_readphy(tp, 0x14, &tmp);
|
|
}
|
|
}
|
|
}
|
|
|
|
__tg3_set_rx_mode(tp->dev);
|
|
|
|
/* Initialize receive rules. */
|
|
tw32(MAC_RCV_RULE_0, 0xc2000000 & RCV_RULE_DISABLE_MASK);
|
|
tw32(MAC_RCV_VALUE_0, 0xffffffff & RCV_RULE_DISABLE_MASK);
|
|
tw32(MAC_RCV_RULE_1, 0x86000004 & RCV_RULE_DISABLE_MASK);
|
|
tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
|
|
limit = 8;
|
|
else
|
|
limit = 16;
|
|
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF)
|
|
limit -= 4;
|
|
switch (limit) {
|
|
case 16:
|
|
tw32(MAC_RCV_RULE_15, 0); tw32(MAC_RCV_VALUE_15, 0);
|
|
case 15:
|
|
tw32(MAC_RCV_RULE_14, 0); tw32(MAC_RCV_VALUE_14, 0);
|
|
case 14:
|
|
tw32(MAC_RCV_RULE_13, 0); tw32(MAC_RCV_VALUE_13, 0);
|
|
case 13:
|
|
tw32(MAC_RCV_RULE_12, 0); tw32(MAC_RCV_VALUE_12, 0);
|
|
case 12:
|
|
tw32(MAC_RCV_RULE_11, 0); tw32(MAC_RCV_VALUE_11, 0);
|
|
case 11:
|
|
tw32(MAC_RCV_RULE_10, 0); tw32(MAC_RCV_VALUE_10, 0);
|
|
case 10:
|
|
tw32(MAC_RCV_RULE_9, 0); tw32(MAC_RCV_VALUE_9, 0);
|
|
case 9:
|
|
tw32(MAC_RCV_RULE_8, 0); tw32(MAC_RCV_VALUE_8, 0);
|
|
case 8:
|
|
tw32(MAC_RCV_RULE_7, 0); tw32(MAC_RCV_VALUE_7, 0);
|
|
case 7:
|
|
tw32(MAC_RCV_RULE_6, 0); tw32(MAC_RCV_VALUE_6, 0);
|
|
case 6:
|
|
tw32(MAC_RCV_RULE_5, 0); tw32(MAC_RCV_VALUE_5, 0);
|
|
case 5:
|
|
tw32(MAC_RCV_RULE_4, 0); tw32(MAC_RCV_VALUE_4, 0);
|
|
case 4:
|
|
/* tw32(MAC_RCV_RULE_3, 0); tw32(MAC_RCV_VALUE_3, 0); */
|
|
case 3:
|
|
/* tw32(MAC_RCV_RULE_2, 0); tw32(MAC_RCV_VALUE_2, 0); */
|
|
case 2:
|
|
case 1:
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
|
|
/* Write our heartbeat update interval to APE. */
|
|
tg3_ape_write32(tp, TG3_APE_HOST_HEARTBEAT_INT_MS,
|
|
APE_HOST_HEARTBEAT_INT_DISABLE);
|
|
|
|
tg3_write_sig_post_reset(tp, RESET_KIND_INIT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Called at device open time to get the chip ready for
|
|
* packet processing. Invoked with tp->lock held.
|
|
*/
|
|
static int tg3_init_hw(struct tg3 *tp, int reset_phy)
|
|
{
|
|
tg3_switch_clocks(tp);
|
|
|
|
tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
|
|
|
|
return tg3_reset_hw(tp, reset_phy);
|
|
}
|
|
|
|
#define TG3_STAT_ADD32(PSTAT, REG) \
|
|
do { u32 __val = tr32(REG); \
|
|
(PSTAT)->low += __val; \
|
|
if ((PSTAT)->low < __val) \
|
|
(PSTAT)->high += 1; \
|
|
} while (0)
|
|
|
|
static void tg3_periodic_fetch_stats(struct tg3 *tp)
|
|
{
|
|
struct tg3_hw_stats *sp = tp->hw_stats;
|
|
|
|
if (!netif_carrier_ok(tp->dev))
|
|
return;
|
|
|
|
TG3_STAT_ADD32(&sp->tx_octets, MAC_TX_STATS_OCTETS);
|
|
TG3_STAT_ADD32(&sp->tx_collisions, MAC_TX_STATS_COLLISIONS);
|
|
TG3_STAT_ADD32(&sp->tx_xon_sent, MAC_TX_STATS_XON_SENT);
|
|
TG3_STAT_ADD32(&sp->tx_xoff_sent, MAC_TX_STATS_XOFF_SENT);
|
|
TG3_STAT_ADD32(&sp->tx_mac_errors, MAC_TX_STATS_MAC_ERRORS);
|
|
TG3_STAT_ADD32(&sp->tx_single_collisions, MAC_TX_STATS_SINGLE_COLLISIONS);
|
|
TG3_STAT_ADD32(&sp->tx_mult_collisions, MAC_TX_STATS_MULT_COLLISIONS);
|
|
TG3_STAT_ADD32(&sp->tx_deferred, MAC_TX_STATS_DEFERRED);
|
|
TG3_STAT_ADD32(&sp->tx_excessive_collisions, MAC_TX_STATS_EXCESSIVE_COL);
|
|
TG3_STAT_ADD32(&sp->tx_late_collisions, MAC_TX_STATS_LATE_COL);
|
|
TG3_STAT_ADD32(&sp->tx_ucast_packets, MAC_TX_STATS_UCAST);
|
|
TG3_STAT_ADD32(&sp->tx_mcast_packets, MAC_TX_STATS_MCAST);
|
|
TG3_STAT_ADD32(&sp->tx_bcast_packets, MAC_TX_STATS_BCAST);
|
|
|
|
TG3_STAT_ADD32(&sp->rx_octets, MAC_RX_STATS_OCTETS);
|
|
TG3_STAT_ADD32(&sp->rx_fragments, MAC_RX_STATS_FRAGMENTS);
|
|
TG3_STAT_ADD32(&sp->rx_ucast_packets, MAC_RX_STATS_UCAST);
|
|
TG3_STAT_ADD32(&sp->rx_mcast_packets, MAC_RX_STATS_MCAST);
|
|
TG3_STAT_ADD32(&sp->rx_bcast_packets, MAC_RX_STATS_BCAST);
|
|
TG3_STAT_ADD32(&sp->rx_fcs_errors, MAC_RX_STATS_FCS_ERRORS);
|
|
TG3_STAT_ADD32(&sp->rx_align_errors, MAC_RX_STATS_ALIGN_ERRORS);
|
|
TG3_STAT_ADD32(&sp->rx_xon_pause_rcvd, MAC_RX_STATS_XON_PAUSE_RECVD);
|
|
TG3_STAT_ADD32(&sp->rx_xoff_pause_rcvd, MAC_RX_STATS_XOFF_PAUSE_RECVD);
|
|
TG3_STAT_ADD32(&sp->rx_mac_ctrl_rcvd, MAC_RX_STATS_MAC_CTRL_RECVD);
|
|
TG3_STAT_ADD32(&sp->rx_xoff_entered, MAC_RX_STATS_XOFF_ENTERED);
|
|
TG3_STAT_ADD32(&sp->rx_frame_too_long_errors, MAC_RX_STATS_FRAME_TOO_LONG);
|
|
TG3_STAT_ADD32(&sp->rx_jabbers, MAC_RX_STATS_JABBERS);
|
|
TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
|
|
|
|
TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
|
|
TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
|
|
TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
|
|
}
|
|
|
|
static void tg3_timer(unsigned long __opaque)
|
|
{
|
|
struct tg3 *tp = (struct tg3 *) __opaque;
|
|
|
|
if (tp->irq_sync)
|
|
goto restart_timer;
|
|
|
|
spin_lock(&tp->lock);
|
|
|
|
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
|
|
/* All of this garbage is because when using non-tagged
|
|
* IRQ status the mailbox/status_block protocol the chip
|
|
* uses with the cpu is race prone.
|
|
*/
|
|
if (tp->hw_status->status & SD_STATUS_UPDATED) {
|
|
tw32(GRC_LOCAL_CTRL,
|
|
tp->grc_local_ctrl | GRC_LCLCTRL_SETINT);
|
|
} else {
|
|
tw32(HOSTCC_MODE, tp->coalesce_mode |
|
|
(HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW));
|
|
}
|
|
|
|
if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
|
|
tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER;
|
|
spin_unlock(&tp->lock);
|
|
schedule_work(&tp->reset_task);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* This part only runs once per second. */
|
|
if (!--tp->timer_counter) {
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
|
|
tg3_periodic_fetch_stats(tp);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) {
|
|
u32 mac_stat;
|
|
int phy_event;
|
|
|
|
mac_stat = tr32(MAC_STATUS);
|
|
|
|
phy_event = 0;
|
|
if (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) {
|
|
if (mac_stat & MAC_STATUS_MI_INTERRUPT)
|
|
phy_event = 1;
|
|
} else if (mac_stat & MAC_STATUS_LNKSTATE_CHANGED)
|
|
phy_event = 1;
|
|
|
|
if (phy_event)
|
|
tg3_setup_phy(tp, 0);
|
|
} else if (tp->tg3_flags & TG3_FLAG_POLL_SERDES) {
|
|
u32 mac_stat = tr32(MAC_STATUS);
|
|
int need_setup = 0;
|
|
|
|
if (netif_carrier_ok(tp->dev) &&
|
|
(mac_stat & MAC_STATUS_LNKSTATE_CHANGED)) {
|
|
need_setup = 1;
|
|
}
|
|
if (! netif_carrier_ok(tp->dev) &&
|
|
(mac_stat & (MAC_STATUS_PCS_SYNCED |
|
|
MAC_STATUS_SIGNAL_DET))) {
|
|
need_setup = 1;
|
|
}
|
|
if (need_setup) {
|
|
if (!tp->serdes_counter) {
|
|
tw32_f(MAC_MODE,
|
|
(tp->mac_mode &
|
|
~MAC_MODE_PORT_MODE_MASK));
|
|
udelay(40);
|
|
tw32_f(MAC_MODE, tp->mac_mode);
|
|
udelay(40);
|
|
}
|
|
tg3_setup_phy(tp, 0);
|
|
}
|
|
} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
|
|
tg3_serdes_parallel_detect(tp);
|
|
|
|
tp->timer_counter = tp->timer_multiplier;
|
|
}
|
|
|
|
/* Heartbeat is only sent once every 2 seconds.
|
|
*
|
|
* The heartbeat is to tell the ASF firmware that the host
|
|
* driver is still alive. In the event that the OS crashes,
|
|
* ASF needs to reset the hardware to free up the FIFO space
|
|
* that may be filled with rx packets destined for the host.
|
|
* If the FIFO is full, ASF will no longer function properly.
|
|
*
|
|
* Unintended resets have been reported on real time kernels
|
|
* where the timer doesn't run on time. Netpoll will also have
|
|
* same problem.
|
|
*
|
|
* The new FWCMD_NICDRV_ALIVE3 command tells the ASF firmware
|
|
* to check the ring condition when the heartbeat is expiring
|
|
* before doing the reset. This will prevent most unintended
|
|
* resets.
|
|
*/
|
|
if (!--tp->asf_counter) {
|
|
if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
|
|
!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
|
|
tg3_wait_for_event_ack(tp);
|
|
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX,
|
|
FWCMD_NICDRV_ALIVE3);
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
|
|
/* 5 seconds timeout */
|
|
tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
|
|
|
|
tg3_generate_fw_event(tp);
|
|
}
|
|
tp->asf_counter = tp->asf_multiplier;
|
|
}
|
|
|
|
spin_unlock(&tp->lock);
|
|
|
|
restart_timer:
|
|
tp->timer.expires = jiffies + tp->timer_offset;
|
|
add_timer(&tp->timer);
|
|
}
|
|
|
|
static int tg3_request_irq(struct tg3 *tp)
|
|
{
|
|
irq_handler_t fn;
|
|
unsigned long flags;
|
|
struct net_device *dev = tp->dev;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
|
|
fn = tg3_msi;
|
|
if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)
|
|
fn = tg3_msi_1shot;
|
|
flags = IRQF_SAMPLE_RANDOM;
|
|
} else {
|
|
fn = tg3_interrupt;
|
|
if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
|
|
fn = tg3_interrupt_tagged;
|
|
flags = IRQF_SHARED | IRQF_SAMPLE_RANDOM;
|
|
}
|
|
return (request_irq(tp->pdev->irq, fn, flags, dev->name, dev));
|
|
}
|
|
|
|
static int tg3_test_interrupt(struct tg3 *tp)
|
|
{
|
|
struct net_device *dev = tp->dev;
|
|
int err, i, intr_ok = 0;
|
|
|
|
if (!netif_running(dev))
|
|
return -ENODEV;
|
|
|
|
tg3_disable_ints(tp);
|
|
|
|
free_irq(tp->pdev->irq, dev);
|
|
|
|
err = request_irq(tp->pdev->irq, tg3_test_isr,
|
|
IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
|
|
if (err)
|
|
return err;
|
|
|
|
tp->hw_status->status &= ~SD_STATUS_UPDATED;
|
|
tg3_enable_ints(tp);
|
|
|
|
tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
|
|
HOSTCC_MODE_NOW);
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
u32 int_mbox, misc_host_ctrl;
|
|
|
|
int_mbox = tr32_mailbox(MAILBOX_INTERRUPT_0 +
|
|
TG3_64BIT_REG_LOW);
|
|
misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL);
|
|
|
|
if ((int_mbox != 0) ||
|
|
(misc_host_ctrl & MISC_HOST_CTRL_MASK_PCI_INT)) {
|
|
intr_ok = 1;
|
|
break;
|
|
}
|
|
|
|
msleep(10);
|
|
}
|
|
|
|
tg3_disable_ints(tp);
|
|
|
|
free_irq(tp->pdev->irq, dev);
|
|
|
|
err = tg3_request_irq(tp);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
if (intr_ok)
|
|
return 0;
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
/* Returns 0 if MSI test succeeds or MSI test fails and INTx mode is
|
|
* successfully restored
|
|
*/
|
|
static int tg3_test_msi(struct tg3 *tp)
|
|
{
|
|
struct net_device *dev = tp->dev;
|
|
int err;
|
|
u16 pci_cmd;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSI))
|
|
return 0;
|
|
|
|
/* Turn off SERR reporting in case MSI terminates with Master
|
|
* Abort.
|
|
*/
|
|
pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd);
|
|
pci_write_config_word(tp->pdev, PCI_COMMAND,
|
|
pci_cmd & ~PCI_COMMAND_SERR);
|
|
|
|
err = tg3_test_interrupt(tp);
|
|
|
|
pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd);
|
|
|
|
if (!err)
|
|
return 0;
|
|
|
|
/* other failures */
|
|
if (err != -EIO)
|
|
return err;
|
|
|
|
/* MSI test failed, go back to INTx mode */
|
|
printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
|
|
"switching to INTx mode. Please report this failure to "
|
|
"the PCI maintainer and include system chipset information.\n",
|
|
tp->dev->name);
|
|
|
|
free_irq(tp->pdev->irq, dev);
|
|
pci_disable_msi(tp->pdev);
|
|
|
|
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
|
|
|
|
err = tg3_request_irq(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Need to reset the chip because the MSI cycle may have terminated
|
|
* with Master Abort.
|
|
*/
|
|
tg3_full_lock(tp, 1);
|
|
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
err = tg3_init_hw(tp, 1);
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
if (err)
|
|
free_irq(tp->pdev->irq, dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tg3_request_firmware(struct tg3 *tp)
|
|
{
|
|
const __be32 *fw_data;
|
|
|
|
if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
|
|
printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
|
|
tp->dev->name, tp->fw_needed);
|
|
return -ENOENT;
|
|
}
|
|
|
|
fw_data = (void *)tp->fw->data;
|
|
|
|
/* Firmware blob starts with version numbers, followed by
|
|
* start address and _full_ length including BSS sections
|
|
* (which must be longer than the actual data, of course
|
|
*/
|
|
|
|
tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */
|
|
if (tp->fw_len < (tp->fw->size - 12)) {
|
|
printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
|
|
tp->dev->name, tp->fw_len, tp->fw_needed);
|
|
release_firmware(tp->fw);
|
|
tp->fw = NULL;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* We no longer need firmware; we have it. */
|
|
tp->fw_needed = NULL;
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_open(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int err;
|
|
|
|
if (tp->fw_needed) {
|
|
err = tg3_request_firmware(tp);
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
|
|
if (err)
|
|
return err;
|
|
} else if (err) {
|
|
printk(KERN_WARNING "%s: TSO capability disabled.\n",
|
|
tp->dev->name);
|
|
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
|
|
} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
|
|
printk(KERN_NOTICE "%s: TSO capability restored.\n",
|
|
tp->dev->name);
|
|
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
|
|
}
|
|
}
|
|
|
|
netif_carrier_off(tp->dev);
|
|
|
|
err = tg3_set_power_state(tp, PCI_D0);
|
|
if (err)
|
|
return err;
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
tg3_disable_ints(tp);
|
|
tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
/* The placement of this call is tied
|
|
* to the setup and use of Host TX descriptors.
|
|
*/
|
|
err = tg3_alloc_consistent(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_SUPPORT_MSI) {
|
|
/* All MSI supporting chips should support tagged
|
|
* status. Assert that this is the case.
|
|
*/
|
|
if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
|
|
printk(KERN_WARNING PFX "%s: MSI without TAGGED? "
|
|
"Not using MSI.\n", tp->dev->name);
|
|
} else if (pci_enable_msi(tp->pdev) == 0) {
|
|
u32 msi_mode;
|
|
|
|
msi_mode = tr32(MSGINT_MODE);
|
|
tw32(MSGINT_MODE, msi_mode | MSGINT_MODE_ENABLE);
|
|
tp->tg3_flags2 |= TG3_FLG2_USING_MSI;
|
|
}
|
|
}
|
|
err = tg3_request_irq(tp);
|
|
|
|
if (err) {
|
|
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
|
|
pci_disable_msi(tp->pdev);
|
|
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
|
|
}
|
|
tg3_free_consistent(tp);
|
|
return err;
|
|
}
|
|
|
|
napi_enable(&tp->napi);
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
err = tg3_init_hw(tp, 1);
|
|
if (err) {
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
tg3_free_rings(tp);
|
|
} else {
|
|
if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)
|
|
tp->timer_offset = HZ;
|
|
else
|
|
tp->timer_offset = HZ / 10;
|
|
|
|
BUG_ON(tp->timer_offset > HZ);
|
|
tp->timer_counter = tp->timer_multiplier =
|
|
(HZ / tp->timer_offset);
|
|
tp->asf_counter = tp->asf_multiplier =
|
|
((HZ / tp->timer_offset) * 2);
|
|
|
|
init_timer(&tp->timer);
|
|
tp->timer.expires = jiffies + tp->timer_offset;
|
|
tp->timer.data = (unsigned long) tp;
|
|
tp->timer.function = tg3_timer;
|
|
}
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
if (err) {
|
|
napi_disable(&tp->napi);
|
|
free_irq(tp->pdev->irq, dev);
|
|
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
|
|
pci_disable_msi(tp->pdev);
|
|
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
|
|
}
|
|
tg3_free_consistent(tp);
|
|
return err;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
|
|
err = tg3_test_msi(tp);
|
|
|
|
if (err) {
|
|
tg3_full_lock(tp, 0);
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
|
|
pci_disable_msi(tp->pdev);
|
|
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
|
|
}
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
tg3_free_rings(tp);
|
|
tg3_free_consistent(tp);
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
napi_disable(&tp->napi);
|
|
|
|
return err;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
|
|
if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI) {
|
|
u32 val = tr32(PCIE_TRANSACTION_CFG);
|
|
|
|
tw32(PCIE_TRANSACTION_CFG,
|
|
val | PCIE_TRANS_CFG_1SHOT_MSI);
|
|
}
|
|
}
|
|
}
|
|
|
|
tg3_phy_start(tp);
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
add_timer(&tp->timer);
|
|
tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
|
|
tg3_enable_ints(tp);
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
/*static*/ void tg3_dump_state(struct tg3 *tp)
|
|
{
|
|
u32 val32, val32_2, val32_3, val32_4, val32_5;
|
|
u16 val16;
|
|
int i;
|
|
|
|
pci_read_config_word(tp->pdev, PCI_STATUS, &val16);
|
|
pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE, &val32);
|
|
printk("DEBUG: PCI status [%04x] TG3PCI state[%08x]\n",
|
|
val16, val32);
|
|
|
|
/* MAC block */
|
|
printk("DEBUG: MAC_MODE[%08x] MAC_STATUS[%08x]\n",
|
|
tr32(MAC_MODE), tr32(MAC_STATUS));
|
|
printk(" MAC_EVENT[%08x] MAC_LED_CTRL[%08x]\n",
|
|
tr32(MAC_EVENT), tr32(MAC_LED_CTRL));
|
|
printk("DEBUG: MAC_TX_MODE[%08x] MAC_TX_STATUS[%08x]\n",
|
|
tr32(MAC_TX_MODE), tr32(MAC_TX_STATUS));
|
|
printk(" MAC_RX_MODE[%08x] MAC_RX_STATUS[%08x]\n",
|
|
tr32(MAC_RX_MODE), tr32(MAC_RX_STATUS));
|
|
|
|
/* Send data initiator control block */
|
|
printk("DEBUG: SNDDATAI_MODE[%08x] SNDDATAI_STATUS[%08x]\n",
|
|
tr32(SNDDATAI_MODE), tr32(SNDDATAI_STATUS));
|
|
printk(" SNDDATAI_STATSCTRL[%08x]\n",
|
|
tr32(SNDDATAI_STATSCTRL));
|
|
|
|
/* Send data completion control block */
|
|
printk("DEBUG: SNDDATAC_MODE[%08x]\n", tr32(SNDDATAC_MODE));
|
|
|
|
/* Send BD ring selector block */
|
|
printk("DEBUG: SNDBDS_MODE[%08x] SNDBDS_STATUS[%08x]\n",
|
|
tr32(SNDBDS_MODE), tr32(SNDBDS_STATUS));
|
|
|
|
/* Send BD initiator control block */
|
|
printk("DEBUG: SNDBDI_MODE[%08x] SNDBDI_STATUS[%08x]\n",
|
|
tr32(SNDBDI_MODE), tr32(SNDBDI_STATUS));
|
|
|
|
/* Send BD completion control block */
|
|
printk("DEBUG: SNDBDC_MODE[%08x]\n", tr32(SNDBDC_MODE));
|
|
|
|
/* Receive list placement control block */
|
|
printk("DEBUG: RCVLPC_MODE[%08x] RCVLPC_STATUS[%08x]\n",
|
|
tr32(RCVLPC_MODE), tr32(RCVLPC_STATUS));
|
|
printk(" RCVLPC_STATSCTRL[%08x]\n",
|
|
tr32(RCVLPC_STATSCTRL));
|
|
|
|
/* Receive data and receive BD initiator control block */
|
|
printk("DEBUG: RCVDBDI_MODE[%08x] RCVDBDI_STATUS[%08x]\n",
|
|
tr32(RCVDBDI_MODE), tr32(RCVDBDI_STATUS));
|
|
|
|
/* Receive data completion control block */
|
|
printk("DEBUG: RCVDCC_MODE[%08x]\n",
|
|
tr32(RCVDCC_MODE));
|
|
|
|
/* Receive BD initiator control block */
|
|
printk("DEBUG: RCVBDI_MODE[%08x] RCVBDI_STATUS[%08x]\n",
|
|
tr32(RCVBDI_MODE), tr32(RCVBDI_STATUS));
|
|
|
|
/* Receive BD completion control block */
|
|
printk("DEBUG: RCVCC_MODE[%08x] RCVCC_STATUS[%08x]\n",
|
|
tr32(RCVCC_MODE), tr32(RCVCC_STATUS));
|
|
|
|
/* Receive list selector control block */
|
|
printk("DEBUG: RCVLSC_MODE[%08x] RCVLSC_STATUS[%08x]\n",
|
|
tr32(RCVLSC_MODE), tr32(RCVLSC_STATUS));
|
|
|
|
/* Mbuf cluster free block */
|
|
printk("DEBUG: MBFREE_MODE[%08x] MBFREE_STATUS[%08x]\n",
|
|
tr32(MBFREE_MODE), tr32(MBFREE_STATUS));
|
|
|
|
/* Host coalescing control block */
|
|
printk("DEBUG: HOSTCC_MODE[%08x] HOSTCC_STATUS[%08x]\n",
|
|
tr32(HOSTCC_MODE), tr32(HOSTCC_STATUS));
|
|
printk("DEBUG: HOSTCC_STATS_BLK_HOST_ADDR[%08x%08x]\n",
|
|
tr32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH),
|
|
tr32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW));
|
|
printk("DEBUG: HOSTCC_STATUS_BLK_HOST_ADDR[%08x%08x]\n",
|
|
tr32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH),
|
|
tr32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW));
|
|
printk("DEBUG: HOSTCC_STATS_BLK_NIC_ADDR[%08x]\n",
|
|
tr32(HOSTCC_STATS_BLK_NIC_ADDR));
|
|
printk("DEBUG: HOSTCC_STATUS_BLK_NIC_ADDR[%08x]\n",
|
|
tr32(HOSTCC_STATUS_BLK_NIC_ADDR));
|
|
|
|
/* Memory arbiter control block */
|
|
printk("DEBUG: MEMARB_MODE[%08x] MEMARB_STATUS[%08x]\n",
|
|
tr32(MEMARB_MODE), tr32(MEMARB_STATUS));
|
|
|
|
/* Buffer manager control block */
|
|
printk("DEBUG: BUFMGR_MODE[%08x] BUFMGR_STATUS[%08x]\n",
|
|
tr32(BUFMGR_MODE), tr32(BUFMGR_STATUS));
|
|
printk("DEBUG: BUFMGR_MB_POOL_ADDR[%08x] BUFMGR_MB_POOL_SIZE[%08x]\n",
|
|
tr32(BUFMGR_MB_POOL_ADDR), tr32(BUFMGR_MB_POOL_SIZE));
|
|
printk("DEBUG: BUFMGR_DMA_DESC_POOL_ADDR[%08x] "
|
|
"BUFMGR_DMA_DESC_POOL_SIZE[%08x]\n",
|
|
tr32(BUFMGR_DMA_DESC_POOL_ADDR),
|
|
tr32(BUFMGR_DMA_DESC_POOL_SIZE));
|
|
|
|
/* Read DMA control block */
|
|
printk("DEBUG: RDMAC_MODE[%08x] RDMAC_STATUS[%08x]\n",
|
|
tr32(RDMAC_MODE), tr32(RDMAC_STATUS));
|
|
|
|
/* Write DMA control block */
|
|
printk("DEBUG: WDMAC_MODE[%08x] WDMAC_STATUS[%08x]\n",
|
|
tr32(WDMAC_MODE), tr32(WDMAC_STATUS));
|
|
|
|
/* DMA completion block */
|
|
printk("DEBUG: DMAC_MODE[%08x]\n",
|
|
tr32(DMAC_MODE));
|
|
|
|
/* GRC block */
|
|
printk("DEBUG: GRC_MODE[%08x] GRC_MISC_CFG[%08x]\n",
|
|
tr32(GRC_MODE), tr32(GRC_MISC_CFG));
|
|
printk("DEBUG: GRC_LOCAL_CTRL[%08x]\n",
|
|
tr32(GRC_LOCAL_CTRL));
|
|
|
|
/* TG3_BDINFOs */
|
|
printk("DEBUG: RCVDBDI_JUMBO_BD[%08x%08x:%08x:%08x]\n",
|
|
tr32(RCVDBDI_JUMBO_BD + 0x0),
|
|
tr32(RCVDBDI_JUMBO_BD + 0x4),
|
|
tr32(RCVDBDI_JUMBO_BD + 0x8),
|
|
tr32(RCVDBDI_JUMBO_BD + 0xc));
|
|
printk("DEBUG: RCVDBDI_STD_BD[%08x%08x:%08x:%08x]\n",
|
|
tr32(RCVDBDI_STD_BD + 0x0),
|
|
tr32(RCVDBDI_STD_BD + 0x4),
|
|
tr32(RCVDBDI_STD_BD + 0x8),
|
|
tr32(RCVDBDI_STD_BD + 0xc));
|
|
printk("DEBUG: RCVDBDI_MINI_BD[%08x%08x:%08x:%08x]\n",
|
|
tr32(RCVDBDI_MINI_BD + 0x0),
|
|
tr32(RCVDBDI_MINI_BD + 0x4),
|
|
tr32(RCVDBDI_MINI_BD + 0x8),
|
|
tr32(RCVDBDI_MINI_BD + 0xc));
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_SEND_RCB + 0x0, &val32);
|
|
tg3_read_mem(tp, NIC_SRAM_SEND_RCB + 0x4, &val32_2);
|
|
tg3_read_mem(tp, NIC_SRAM_SEND_RCB + 0x8, &val32_3);
|
|
tg3_read_mem(tp, NIC_SRAM_SEND_RCB + 0xc, &val32_4);
|
|
printk("DEBUG: SRAM_SEND_RCB_0[%08x%08x:%08x:%08x]\n",
|
|
val32, val32_2, val32_3, val32_4);
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_RCV_RET_RCB + 0x0, &val32);
|
|
tg3_read_mem(tp, NIC_SRAM_RCV_RET_RCB + 0x4, &val32_2);
|
|
tg3_read_mem(tp, NIC_SRAM_RCV_RET_RCB + 0x8, &val32_3);
|
|
tg3_read_mem(tp, NIC_SRAM_RCV_RET_RCB + 0xc, &val32_4);
|
|
printk("DEBUG: SRAM_RCV_RET_RCB_0[%08x%08x:%08x:%08x]\n",
|
|
val32, val32_2, val32_3, val32_4);
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_STATUS_BLK + 0x0, &val32);
|
|
tg3_read_mem(tp, NIC_SRAM_STATUS_BLK + 0x4, &val32_2);
|
|
tg3_read_mem(tp, NIC_SRAM_STATUS_BLK + 0x8, &val32_3);
|
|
tg3_read_mem(tp, NIC_SRAM_STATUS_BLK + 0xc, &val32_4);
|
|
tg3_read_mem(tp, NIC_SRAM_STATUS_BLK + 0x10, &val32_5);
|
|
printk("DEBUG: SRAM_STATUS_BLK[%08x:%08x:%08x:%08x:%08x]\n",
|
|
val32, val32_2, val32_3, val32_4, val32_5);
|
|
|
|
/* SW status block */
|
|
printk("DEBUG: Host status block [%08x:%08x:(%04x:%04x:%04x):(%04x:%04x)]\n",
|
|
tp->hw_status->status,
|
|
tp->hw_status->status_tag,
|
|
tp->hw_status->rx_jumbo_consumer,
|
|
tp->hw_status->rx_consumer,
|
|
tp->hw_status->rx_mini_consumer,
|
|
tp->hw_status->idx[0].rx_producer,
|
|
tp->hw_status->idx[0].tx_consumer);
|
|
|
|
/* SW statistics block */
|
|
printk("DEBUG: Host statistics block [%08x:%08x:%08x:%08x]\n",
|
|
((u32 *)tp->hw_stats)[0],
|
|
((u32 *)tp->hw_stats)[1],
|
|
((u32 *)tp->hw_stats)[2],
|
|
((u32 *)tp->hw_stats)[3]);
|
|
|
|
/* Mailboxes */
|
|
printk("DEBUG: SNDHOST_PROD[%08x%08x] SNDNIC_PROD[%08x%08x]\n",
|
|
tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + 0x0),
|
|
tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + 0x4),
|
|
tr32_mailbox(MAILBOX_SNDNIC_PROD_IDX_0 + 0x0),
|
|
tr32_mailbox(MAILBOX_SNDNIC_PROD_IDX_0 + 0x4));
|
|
|
|
/* NIC side send descriptors. */
|
|
for (i = 0; i < 6; i++) {
|
|
unsigned long txd;
|
|
|
|
txd = tp->regs + NIC_SRAM_WIN_BASE + NIC_SRAM_TX_BUFFER_DESC
|
|
+ (i * sizeof(struct tg3_tx_buffer_desc));
|
|
printk("DEBUG: NIC TXD(%d)[%08x:%08x:%08x:%08x]\n",
|
|
i,
|
|
readl(txd + 0x0), readl(txd + 0x4),
|
|
readl(txd + 0x8), readl(txd + 0xc));
|
|
}
|
|
|
|
/* NIC side RX descriptors. */
|
|
for (i = 0; i < 6; i++) {
|
|
unsigned long rxd;
|
|
|
|
rxd = tp->regs + NIC_SRAM_WIN_BASE + NIC_SRAM_RX_BUFFER_DESC
|
|
+ (i * sizeof(struct tg3_rx_buffer_desc));
|
|
printk("DEBUG: NIC RXD_STD(%d)[0][%08x:%08x:%08x:%08x]\n",
|
|
i,
|
|
readl(rxd + 0x0), readl(rxd + 0x4),
|
|
readl(rxd + 0x8), readl(rxd + 0xc));
|
|
rxd += (4 * sizeof(u32));
|
|
printk("DEBUG: NIC RXD_STD(%d)[1][%08x:%08x:%08x:%08x]\n",
|
|
i,
|
|
readl(rxd + 0x0), readl(rxd + 0x4),
|
|
readl(rxd + 0x8), readl(rxd + 0xc));
|
|
}
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
unsigned long rxd;
|
|
|
|
rxd = tp->regs + NIC_SRAM_WIN_BASE + NIC_SRAM_RX_JUMBO_BUFFER_DESC
|
|
+ (i * sizeof(struct tg3_rx_buffer_desc));
|
|
printk("DEBUG: NIC RXD_JUMBO(%d)[0][%08x:%08x:%08x:%08x]\n",
|
|
i,
|
|
readl(rxd + 0x0), readl(rxd + 0x4),
|
|
readl(rxd + 0x8), readl(rxd + 0xc));
|
|
rxd += (4 * sizeof(u32));
|
|
printk("DEBUG: NIC RXD_JUMBO(%d)[1][%08x:%08x:%08x:%08x]\n",
|
|
i,
|
|
readl(rxd + 0x0), readl(rxd + 0x4),
|
|
readl(rxd + 0x8), readl(rxd + 0xc));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static struct net_device_stats *tg3_get_stats(struct net_device *);
|
|
static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *);
|
|
|
|
static int tg3_close(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
napi_disable(&tp->napi);
|
|
cancel_work_sync(&tp->reset_task);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
del_timer_sync(&tp->timer);
|
|
|
|
tg3_full_lock(tp, 1);
|
|
#if 0
|
|
tg3_dump_state(tp);
|
|
#endif
|
|
|
|
tg3_disable_ints(tp);
|
|
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
tg3_free_rings(tp);
|
|
tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
free_irq(tp->pdev->irq, dev);
|
|
if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
|
|
pci_disable_msi(tp->pdev);
|
|
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
|
|
}
|
|
|
|
memcpy(&tp->net_stats_prev, tg3_get_stats(tp->dev),
|
|
sizeof(tp->net_stats_prev));
|
|
memcpy(&tp->estats_prev, tg3_get_estats(tp),
|
|
sizeof(tp->estats_prev));
|
|
|
|
tg3_free_consistent(tp);
|
|
|
|
tg3_set_power_state(tp, PCI_D3hot);
|
|
|
|
netif_carrier_off(tp->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline unsigned long get_stat64(tg3_stat64_t *val)
|
|
{
|
|
unsigned long ret;
|
|
|
|
#if (BITS_PER_LONG == 32)
|
|
ret = val->low;
|
|
#else
|
|
ret = ((u64)val->high << 32) | ((u64)val->low);
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
static inline u64 get_estat64(tg3_stat64_t *val)
|
|
{
|
|
return ((u64)val->high << 32) | ((u64)val->low);
|
|
}
|
|
|
|
static unsigned long calc_crc_errors(struct tg3 *tp)
|
|
{
|
|
struct tg3_hw_stats *hw_stats = tp->hw_stats;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
|
|
u32 val;
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) {
|
|
tg3_writephy(tp, MII_TG3_TEST1,
|
|
val | MII_TG3_TEST1_CRC_EN);
|
|
tg3_readphy(tp, 0x14, &val);
|
|
} else
|
|
val = 0;
|
|
spin_unlock_bh(&tp->lock);
|
|
|
|
tp->phy_crc_errors += val;
|
|
|
|
return tp->phy_crc_errors;
|
|
}
|
|
|
|
return get_stat64(&hw_stats->rx_fcs_errors);
|
|
}
|
|
|
|
#define ESTAT_ADD(member) \
|
|
estats->member = old_estats->member + \
|
|
get_estat64(&hw_stats->member)
|
|
|
|
static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp)
|
|
{
|
|
struct tg3_ethtool_stats *estats = &tp->estats;
|
|
struct tg3_ethtool_stats *old_estats = &tp->estats_prev;
|
|
struct tg3_hw_stats *hw_stats = tp->hw_stats;
|
|
|
|
if (!hw_stats)
|
|
return old_estats;
|
|
|
|
ESTAT_ADD(rx_octets);
|
|
ESTAT_ADD(rx_fragments);
|
|
ESTAT_ADD(rx_ucast_packets);
|
|
ESTAT_ADD(rx_mcast_packets);
|
|
ESTAT_ADD(rx_bcast_packets);
|
|
ESTAT_ADD(rx_fcs_errors);
|
|
ESTAT_ADD(rx_align_errors);
|
|
ESTAT_ADD(rx_xon_pause_rcvd);
|
|
ESTAT_ADD(rx_xoff_pause_rcvd);
|
|
ESTAT_ADD(rx_mac_ctrl_rcvd);
|
|
ESTAT_ADD(rx_xoff_entered);
|
|
ESTAT_ADD(rx_frame_too_long_errors);
|
|
ESTAT_ADD(rx_jabbers);
|
|
ESTAT_ADD(rx_undersize_packets);
|
|
ESTAT_ADD(rx_in_length_errors);
|
|
ESTAT_ADD(rx_out_length_errors);
|
|
ESTAT_ADD(rx_64_or_less_octet_packets);
|
|
ESTAT_ADD(rx_65_to_127_octet_packets);
|
|
ESTAT_ADD(rx_128_to_255_octet_packets);
|
|
ESTAT_ADD(rx_256_to_511_octet_packets);
|
|
ESTAT_ADD(rx_512_to_1023_octet_packets);
|
|
ESTAT_ADD(rx_1024_to_1522_octet_packets);
|
|
ESTAT_ADD(rx_1523_to_2047_octet_packets);
|
|
ESTAT_ADD(rx_2048_to_4095_octet_packets);
|
|
ESTAT_ADD(rx_4096_to_8191_octet_packets);
|
|
ESTAT_ADD(rx_8192_to_9022_octet_packets);
|
|
|
|
ESTAT_ADD(tx_octets);
|
|
ESTAT_ADD(tx_collisions);
|
|
ESTAT_ADD(tx_xon_sent);
|
|
ESTAT_ADD(tx_xoff_sent);
|
|
ESTAT_ADD(tx_flow_control);
|
|
ESTAT_ADD(tx_mac_errors);
|
|
ESTAT_ADD(tx_single_collisions);
|
|
ESTAT_ADD(tx_mult_collisions);
|
|
ESTAT_ADD(tx_deferred);
|
|
ESTAT_ADD(tx_excessive_collisions);
|
|
ESTAT_ADD(tx_late_collisions);
|
|
ESTAT_ADD(tx_collide_2times);
|
|
ESTAT_ADD(tx_collide_3times);
|
|
ESTAT_ADD(tx_collide_4times);
|
|
ESTAT_ADD(tx_collide_5times);
|
|
ESTAT_ADD(tx_collide_6times);
|
|
ESTAT_ADD(tx_collide_7times);
|
|
ESTAT_ADD(tx_collide_8times);
|
|
ESTAT_ADD(tx_collide_9times);
|
|
ESTAT_ADD(tx_collide_10times);
|
|
ESTAT_ADD(tx_collide_11times);
|
|
ESTAT_ADD(tx_collide_12times);
|
|
ESTAT_ADD(tx_collide_13times);
|
|
ESTAT_ADD(tx_collide_14times);
|
|
ESTAT_ADD(tx_collide_15times);
|
|
ESTAT_ADD(tx_ucast_packets);
|
|
ESTAT_ADD(tx_mcast_packets);
|
|
ESTAT_ADD(tx_bcast_packets);
|
|
ESTAT_ADD(tx_carrier_sense_errors);
|
|
ESTAT_ADD(tx_discards);
|
|
ESTAT_ADD(tx_errors);
|
|
|
|
ESTAT_ADD(dma_writeq_full);
|
|
ESTAT_ADD(dma_write_prioq_full);
|
|
ESTAT_ADD(rxbds_empty);
|
|
ESTAT_ADD(rx_discards);
|
|
ESTAT_ADD(rx_errors);
|
|
ESTAT_ADD(rx_threshold_hit);
|
|
|
|
ESTAT_ADD(dma_readq_full);
|
|
ESTAT_ADD(dma_read_prioq_full);
|
|
ESTAT_ADD(tx_comp_queue_full);
|
|
|
|
ESTAT_ADD(ring_set_send_prod_index);
|
|
ESTAT_ADD(ring_status_update);
|
|
ESTAT_ADD(nic_irqs);
|
|
ESTAT_ADD(nic_avoided_irqs);
|
|
ESTAT_ADD(nic_tx_threshold_hit);
|
|
|
|
return estats;
|
|
}
|
|
|
|
static struct net_device_stats *tg3_get_stats(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
struct net_device_stats *stats = &tp->net_stats;
|
|
struct net_device_stats *old_stats = &tp->net_stats_prev;
|
|
struct tg3_hw_stats *hw_stats = tp->hw_stats;
|
|
|
|
if (!hw_stats)
|
|
return old_stats;
|
|
|
|
stats->rx_packets = old_stats->rx_packets +
|
|
get_stat64(&hw_stats->rx_ucast_packets) +
|
|
get_stat64(&hw_stats->rx_mcast_packets) +
|
|
get_stat64(&hw_stats->rx_bcast_packets);
|
|
|
|
stats->tx_packets = old_stats->tx_packets +
|
|
get_stat64(&hw_stats->tx_ucast_packets) +
|
|
get_stat64(&hw_stats->tx_mcast_packets) +
|
|
get_stat64(&hw_stats->tx_bcast_packets);
|
|
|
|
stats->rx_bytes = old_stats->rx_bytes +
|
|
get_stat64(&hw_stats->rx_octets);
|
|
stats->tx_bytes = old_stats->tx_bytes +
|
|
get_stat64(&hw_stats->tx_octets);
|
|
|
|
stats->rx_errors = old_stats->rx_errors +
|
|
get_stat64(&hw_stats->rx_errors);
|
|
stats->tx_errors = old_stats->tx_errors +
|
|
get_stat64(&hw_stats->tx_errors) +
|
|
get_stat64(&hw_stats->tx_mac_errors) +
|
|
get_stat64(&hw_stats->tx_carrier_sense_errors) +
|
|
get_stat64(&hw_stats->tx_discards);
|
|
|
|
stats->multicast = old_stats->multicast +
|
|
get_stat64(&hw_stats->rx_mcast_packets);
|
|
stats->collisions = old_stats->collisions +
|
|
get_stat64(&hw_stats->tx_collisions);
|
|
|
|
stats->rx_length_errors = old_stats->rx_length_errors +
|
|
get_stat64(&hw_stats->rx_frame_too_long_errors) +
|
|
get_stat64(&hw_stats->rx_undersize_packets);
|
|
|
|
stats->rx_over_errors = old_stats->rx_over_errors +
|
|
get_stat64(&hw_stats->rxbds_empty);
|
|
stats->rx_frame_errors = old_stats->rx_frame_errors +
|
|
get_stat64(&hw_stats->rx_align_errors);
|
|
stats->tx_aborted_errors = old_stats->tx_aborted_errors +
|
|
get_stat64(&hw_stats->tx_discards);
|
|
stats->tx_carrier_errors = old_stats->tx_carrier_errors +
|
|
get_stat64(&hw_stats->tx_carrier_sense_errors);
|
|
|
|
stats->rx_crc_errors = old_stats->rx_crc_errors +
|
|
calc_crc_errors(tp);
|
|
|
|
stats->rx_missed_errors = old_stats->rx_missed_errors +
|
|
get_stat64(&hw_stats->rx_discards);
|
|
|
|
return stats;
|
|
}
|
|
|
|
static inline u32 calc_crc(unsigned char *buf, int len)
|
|
{
|
|
u32 reg;
|
|
u32 tmp;
|
|
int j, k;
|
|
|
|
reg = 0xffffffff;
|
|
|
|
for (j = 0; j < len; j++) {
|
|
reg ^= buf[j];
|
|
|
|
for (k = 0; k < 8; k++) {
|
|
tmp = reg & 0x01;
|
|
|
|
reg >>= 1;
|
|
|
|
if (tmp) {
|
|
reg ^= 0xedb88320;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ~reg;
|
|
}
|
|
|
|
static void tg3_set_multi(struct tg3 *tp, unsigned int accept_all)
|
|
{
|
|
/* accept or reject all multicast frames */
|
|
tw32(MAC_HASH_REG_0, accept_all ? 0xffffffff : 0);
|
|
tw32(MAC_HASH_REG_1, accept_all ? 0xffffffff : 0);
|
|
tw32(MAC_HASH_REG_2, accept_all ? 0xffffffff : 0);
|
|
tw32(MAC_HASH_REG_3, accept_all ? 0xffffffff : 0);
|
|
}
|
|
|
|
static void __tg3_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
u32 rx_mode;
|
|
|
|
rx_mode = tp->rx_mode & ~(RX_MODE_PROMISC |
|
|
RX_MODE_KEEP_VLAN_TAG);
|
|
|
|
/* When ASF is in use, we always keep the RX_MODE_KEEP_VLAN_TAG
|
|
* flag clear.
|
|
*/
|
|
#if TG3_VLAN_TAG_USED
|
|
if (!tp->vlgrp &&
|
|
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
|
|
rx_mode |= RX_MODE_KEEP_VLAN_TAG;
|
|
#else
|
|
/* By definition, VLAN is disabled always in this
|
|
* case.
|
|
*/
|
|
if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
|
|
rx_mode |= RX_MODE_KEEP_VLAN_TAG;
|
|
#endif
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
/* Promiscuous mode. */
|
|
rx_mode |= RX_MODE_PROMISC;
|
|
} else if (dev->flags & IFF_ALLMULTI) {
|
|
/* Accept all multicast. */
|
|
tg3_set_multi (tp, 1);
|
|
} else if (dev->mc_count < 1) {
|
|
/* Reject all multicast. */
|
|
tg3_set_multi (tp, 0);
|
|
} else {
|
|
/* Accept one or more multicast(s). */
|
|
struct dev_mc_list *mclist;
|
|
unsigned int i;
|
|
u32 mc_filter[4] = { 0, };
|
|
u32 regidx;
|
|
u32 bit;
|
|
u32 crc;
|
|
|
|
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
|
|
i++, mclist = mclist->next) {
|
|
|
|
crc = calc_crc (mclist->dmi_addr, ETH_ALEN);
|
|
bit = ~crc & 0x7f;
|
|
regidx = (bit & 0x60) >> 5;
|
|
bit &= 0x1f;
|
|
mc_filter[regidx] |= (1 << bit);
|
|
}
|
|
|
|
tw32(MAC_HASH_REG_0, mc_filter[0]);
|
|
tw32(MAC_HASH_REG_1, mc_filter[1]);
|
|
tw32(MAC_HASH_REG_2, mc_filter[2]);
|
|
tw32(MAC_HASH_REG_3, mc_filter[3]);
|
|
}
|
|
|
|
if (rx_mode != tp->rx_mode) {
|
|
tp->rx_mode = rx_mode;
|
|
tw32_f(MAC_RX_MODE, rx_mode);
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
static void tg3_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return;
|
|
|
|
tg3_full_lock(tp, 0);
|
|
__tg3_set_rx_mode(dev);
|
|
tg3_full_unlock(tp);
|
|
}
|
|
|
|
#define TG3_REGDUMP_LEN (32 * 1024)
|
|
|
|
static int tg3_get_regs_len(struct net_device *dev)
|
|
{
|
|
return TG3_REGDUMP_LEN;
|
|
}
|
|
|
|
static void tg3_get_regs(struct net_device *dev,
|
|
struct ethtool_regs *regs, void *_p)
|
|
{
|
|
u32 *p = _p;
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
u8 *orig_p = _p;
|
|
int i;
|
|
|
|
regs->version = 0;
|
|
|
|
memset(p, 0, TG3_REGDUMP_LEN);
|
|
|
|
if (tp->link_config.phy_is_low_power)
|
|
return;
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
#define __GET_REG32(reg) (*(p)++ = tr32(reg))
|
|
#define GET_REG32_LOOP(base,len) \
|
|
do { p = (u32 *)(orig_p + (base)); \
|
|
for (i = 0; i < len; i += 4) \
|
|
__GET_REG32((base) + i); \
|
|
} while (0)
|
|
#define GET_REG32_1(reg) \
|
|
do { p = (u32 *)(orig_p + (reg)); \
|
|
__GET_REG32((reg)); \
|
|
} while (0)
|
|
|
|
GET_REG32_LOOP(TG3PCI_VENDOR, 0xb0);
|
|
GET_REG32_LOOP(MAILBOX_INTERRUPT_0, 0x200);
|
|
GET_REG32_LOOP(MAC_MODE, 0x4f0);
|
|
GET_REG32_LOOP(SNDDATAI_MODE, 0xe0);
|
|
GET_REG32_1(SNDDATAC_MODE);
|
|
GET_REG32_LOOP(SNDBDS_MODE, 0x80);
|
|
GET_REG32_LOOP(SNDBDI_MODE, 0x48);
|
|
GET_REG32_1(SNDBDC_MODE);
|
|
GET_REG32_LOOP(RCVLPC_MODE, 0x20);
|
|
GET_REG32_LOOP(RCVLPC_SELLST_BASE, 0x15c);
|
|
GET_REG32_LOOP(RCVDBDI_MODE, 0x0c);
|
|
GET_REG32_LOOP(RCVDBDI_JUMBO_BD, 0x3c);
|
|
GET_REG32_LOOP(RCVDBDI_BD_PROD_IDX_0, 0x44);
|
|
GET_REG32_1(RCVDCC_MODE);
|
|
GET_REG32_LOOP(RCVBDI_MODE, 0x20);
|
|
GET_REG32_LOOP(RCVCC_MODE, 0x14);
|
|
GET_REG32_LOOP(RCVLSC_MODE, 0x08);
|
|
GET_REG32_1(MBFREE_MODE);
|
|
GET_REG32_LOOP(HOSTCC_MODE, 0x100);
|
|
GET_REG32_LOOP(MEMARB_MODE, 0x10);
|
|
GET_REG32_LOOP(BUFMGR_MODE, 0x58);
|
|
GET_REG32_LOOP(RDMAC_MODE, 0x08);
|
|
GET_REG32_LOOP(WDMAC_MODE, 0x08);
|
|
GET_REG32_1(RX_CPU_MODE);
|
|
GET_REG32_1(RX_CPU_STATE);
|
|
GET_REG32_1(RX_CPU_PGMCTR);
|
|
GET_REG32_1(RX_CPU_HWBKPT);
|
|
GET_REG32_1(TX_CPU_MODE);
|
|
GET_REG32_1(TX_CPU_STATE);
|
|
GET_REG32_1(TX_CPU_PGMCTR);
|
|
GET_REG32_LOOP(GRCMBOX_INTERRUPT_0, 0x110);
|
|
GET_REG32_LOOP(FTQ_RESET, 0x120);
|
|
GET_REG32_LOOP(MSGINT_MODE, 0x0c);
|
|
GET_REG32_1(DMAC_MODE);
|
|
GET_REG32_LOOP(GRC_MODE, 0x4c);
|
|
if (tp->tg3_flags & TG3_FLAG_NVRAM)
|
|
GET_REG32_LOOP(NVRAM_CMD, 0x24);
|
|
|
|
#undef __GET_REG32
|
|
#undef GET_REG32_LOOP
|
|
#undef GET_REG32_1
|
|
|
|
tg3_full_unlock(tp);
|
|
}
|
|
|
|
static int tg3_get_eeprom_len(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
return tp->nvram_size;
|
|
}
|
|
|
|
static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int ret;
|
|
u8 *pd;
|
|
u32 i, offset, len, b_offset, b_count;
|
|
__be32 val;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
|
|
return -EINVAL;
|
|
|
|
if (tp->link_config.phy_is_low_power)
|
|
return -EAGAIN;
|
|
|
|
offset = eeprom->offset;
|
|
len = eeprom->len;
|
|
eeprom->len = 0;
|
|
|
|
eeprom->magic = TG3_EEPROM_MAGIC;
|
|
|
|
if (offset & 3) {
|
|
/* adjustments to start on required 4 byte boundary */
|
|
b_offset = offset & 3;
|
|
b_count = 4 - b_offset;
|
|
if (b_count > len) {
|
|
/* i.e. offset=1 len=2 */
|
|
b_count = len;
|
|
}
|
|
ret = tg3_nvram_read_be32(tp, offset-b_offset, &val);
|
|
if (ret)
|
|
return ret;
|
|
memcpy(data, ((char*)&val) + b_offset, b_count);
|
|
len -= b_count;
|
|
offset += b_count;
|
|
eeprom->len += b_count;
|
|
}
|
|
|
|
/* read bytes upto the last 4 byte boundary */
|
|
pd = &data[eeprom->len];
|
|
for (i = 0; i < (len - (len & 3)); i += 4) {
|
|
ret = tg3_nvram_read_be32(tp, offset + i, &val);
|
|
if (ret) {
|
|
eeprom->len += i;
|
|
return ret;
|
|
}
|
|
memcpy(pd + i, &val, 4);
|
|
}
|
|
eeprom->len += i;
|
|
|
|
if (len & 3) {
|
|
/* read last bytes not ending on 4 byte boundary */
|
|
pd = &data[eeprom->len];
|
|
b_count = len & 3;
|
|
b_offset = offset + len - b_count;
|
|
ret = tg3_nvram_read_be32(tp, b_offset, &val);
|
|
if (ret)
|
|
return ret;
|
|
memcpy(pd, &val, b_count);
|
|
eeprom->len += b_count;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf);
|
|
|
|
static int tg3_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int ret;
|
|
u32 offset, len, b_offset, odd_len;
|
|
u8 *buf;
|
|
__be32 start, end;
|
|
|
|
if (tp->link_config.phy_is_low_power)
|
|
return -EAGAIN;
|
|
|
|
if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
|
|
eeprom->magic != TG3_EEPROM_MAGIC)
|
|
return -EINVAL;
|
|
|
|
offset = eeprom->offset;
|
|
len = eeprom->len;
|
|
|
|
if ((b_offset = (offset & 3))) {
|
|
/* adjustments to start on required 4 byte boundary */
|
|
ret = tg3_nvram_read_be32(tp, offset-b_offset, &start);
|
|
if (ret)
|
|
return ret;
|
|
len += b_offset;
|
|
offset &= ~3;
|
|
if (len < 4)
|
|
len = 4;
|
|
}
|
|
|
|
odd_len = 0;
|
|
if (len & 3) {
|
|
/* adjustments to end on required 4 byte boundary */
|
|
odd_len = 1;
|
|
len = (len + 3) & ~3;
|
|
ret = tg3_nvram_read_be32(tp, offset+len-4, &end);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
buf = data;
|
|
if (b_offset || odd_len) {
|
|
buf = kmalloc(len, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
if (b_offset)
|
|
memcpy(buf, &start, 4);
|
|
if (odd_len)
|
|
memcpy(buf+len-4, &end, 4);
|
|
memcpy(buf + b_offset, data, eeprom->len);
|
|
}
|
|
|
|
ret = tg3_nvram_write_block(tp, offset, len, buf);
|
|
|
|
if (buf != data)
|
|
kfree(buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
|
|
return -EAGAIN;
|
|
return phy_ethtool_gset(tp->mdio_bus->phy_map[PHY_ADDR], cmd);
|
|
}
|
|
|
|
cmd->supported = (SUPPORTED_Autoneg);
|
|
|
|
if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY))
|
|
cmd->supported |= (SUPPORTED_1000baseT_Half |
|
|
SUPPORTED_1000baseT_Full);
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
|
|
cmd->supported |= (SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_TP);
|
|
cmd->port = PORT_TP;
|
|
} else {
|
|
cmd->supported |= SUPPORTED_FIBRE;
|
|
cmd->port = PORT_FIBRE;
|
|
}
|
|
|
|
cmd->advertising = tp->link_config.advertising;
|
|
if (netif_running(dev)) {
|
|
cmd->speed = tp->link_config.active_speed;
|
|
cmd->duplex = tp->link_config.active_duplex;
|
|
}
|
|
cmd->phy_address = PHY_ADDR;
|
|
cmd->transceiver = XCVR_INTERNAL;
|
|
cmd->autoneg = tp->link_config.autoneg;
|
|
cmd->maxtxpkt = 0;
|
|
cmd->maxrxpkt = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
|
|
return -EAGAIN;
|
|
return phy_ethtool_sset(tp->mdio_bus->phy_map[PHY_ADDR], cmd);
|
|
}
|
|
|
|
if (cmd->autoneg != AUTONEG_ENABLE &&
|
|
cmd->autoneg != AUTONEG_DISABLE)
|
|
return -EINVAL;
|
|
|
|
if (cmd->autoneg == AUTONEG_DISABLE &&
|
|
cmd->duplex != DUPLEX_FULL &&
|
|
cmd->duplex != DUPLEX_HALF)
|
|
return -EINVAL;
|
|
|
|
if (cmd->autoneg == AUTONEG_ENABLE) {
|
|
u32 mask = ADVERTISED_Autoneg |
|
|
ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
|
|
mask |= ADVERTISED_1000baseT_Half |
|
|
ADVERTISED_1000baseT_Full;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
|
|
mask |= ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full |
|
|
ADVERTISED_TP;
|
|
else
|
|
mask |= ADVERTISED_FIBRE;
|
|
|
|
if (cmd->advertising & ~mask)
|
|
return -EINVAL;
|
|
|
|
mask &= (ADVERTISED_1000baseT_Half |
|
|
ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full);
|
|
|
|
cmd->advertising &= mask;
|
|
} else {
|
|
if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) {
|
|
if (cmd->speed != SPEED_1000)
|
|
return -EINVAL;
|
|
|
|
if (cmd->duplex != DUPLEX_FULL)
|
|
return -EINVAL;
|
|
} else {
|
|
if (cmd->speed != SPEED_100 &&
|
|
cmd->speed != SPEED_10)
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
tp->link_config.autoneg = cmd->autoneg;
|
|
if (cmd->autoneg == AUTONEG_ENABLE) {
|
|
tp->link_config.advertising = (cmd->advertising |
|
|
ADVERTISED_Autoneg);
|
|
tp->link_config.speed = SPEED_INVALID;
|
|
tp->link_config.duplex = DUPLEX_INVALID;
|
|
} else {
|
|
tp->link_config.advertising = 0;
|
|
tp->link_config.speed = cmd->speed;
|
|
tp->link_config.duplex = cmd->duplex;
|
|
}
|
|
|
|
tp->link_config.orig_speed = tp->link_config.speed;
|
|
tp->link_config.orig_duplex = tp->link_config.duplex;
|
|
tp->link_config.orig_autoneg = tp->link_config.autoneg;
|
|
|
|
if (netif_running(dev))
|
|
tg3_setup_phy(tp, 1);
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tg3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
strcpy(info->driver, DRV_MODULE_NAME);
|
|
strcpy(info->version, DRV_MODULE_VERSION);
|
|
strcpy(info->fw_version, tp->fw_ver);
|
|
strcpy(info->bus_info, pci_name(tp->pdev));
|
|
}
|
|
|
|
static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
|
|
device_can_wakeup(&tp->pdev->dev))
|
|
wol->supported = WAKE_MAGIC;
|
|
else
|
|
wol->supported = 0;
|
|
wol->wolopts = 0;
|
|
if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) &&
|
|
device_can_wakeup(&tp->pdev->dev))
|
|
wol->wolopts = WAKE_MAGIC;
|
|
memset(&wol->sopass, 0, sizeof(wol->sopass));
|
|
}
|
|
|
|
static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
struct device *dp = &tp->pdev->dev;
|
|
|
|
if (wol->wolopts & ~WAKE_MAGIC)
|
|
return -EINVAL;
|
|
if ((wol->wolopts & WAKE_MAGIC) &&
|
|
!((tp->tg3_flags & TG3_FLAG_WOL_CAP) && device_can_wakeup(dp)))
|
|
return -EINVAL;
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
|
|
device_set_wakeup_enable(dp, true);
|
|
} else {
|
|
tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE;
|
|
device_set_wakeup_enable(dp, false);
|
|
}
|
|
spin_unlock_bh(&tp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 tg3_get_msglevel(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
return tp->msg_enable;
|
|
}
|
|
|
|
static void tg3_set_msglevel(struct net_device *dev, u32 value)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
tp->msg_enable = value;
|
|
}
|
|
|
|
static int tg3_set_tso(struct net_device *dev, u32 value)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
|
|
if (value)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
if ((dev->features & NETIF_F_IPV6_CSUM) &&
|
|
(tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)) {
|
|
if (value) {
|
|
dev->features |= NETIF_F_TSO6;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
dev->features |= NETIF_F_TSO_ECN;
|
|
} else
|
|
dev->features &= ~(NETIF_F_TSO6 | NETIF_F_TSO_ECN);
|
|
}
|
|
return ethtool_op_set_tso(dev, value);
|
|
}
|
|
|
|
static int tg3_nway_reset(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int r;
|
|
|
|
if (!netif_running(dev))
|
|
return -EAGAIN;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
|
|
return -EINVAL;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
|
|
return -EAGAIN;
|
|
r = phy_start_aneg(tp->mdio_bus->phy_map[PHY_ADDR]);
|
|
} else {
|
|
u32 bmcr;
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
r = -EINVAL;
|
|
tg3_readphy(tp, MII_BMCR, &bmcr);
|
|
if (!tg3_readphy(tp, MII_BMCR, &bmcr) &&
|
|
((bmcr & BMCR_ANENABLE) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT))) {
|
|
tg3_writephy(tp, MII_BMCR, bmcr | BMCR_ANRESTART |
|
|
BMCR_ANENABLE);
|
|
r = 0;
|
|
}
|
|
spin_unlock_bh(&tp->lock);
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
static void tg3_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
ering->rx_max_pending = TG3_RX_RING_SIZE - 1;
|
|
ering->rx_mini_max_pending = 0;
|
|
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE)
|
|
ering->rx_jumbo_max_pending = TG3_RX_JUMBO_RING_SIZE - 1;
|
|
else
|
|
ering->rx_jumbo_max_pending = 0;
|
|
|
|
ering->tx_max_pending = TG3_TX_RING_SIZE - 1;
|
|
|
|
ering->rx_pending = tp->rx_pending;
|
|
ering->rx_mini_pending = 0;
|
|
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE)
|
|
ering->rx_jumbo_pending = tp->rx_jumbo_pending;
|
|
else
|
|
ering->rx_jumbo_pending = 0;
|
|
|
|
ering->tx_pending = tp->tx_pending;
|
|
}
|
|
|
|
static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int irq_sync = 0, err = 0;
|
|
|
|
if ((ering->rx_pending > TG3_RX_RING_SIZE - 1) ||
|
|
(ering->rx_jumbo_pending > TG3_RX_JUMBO_RING_SIZE - 1) ||
|
|
(ering->tx_pending > TG3_TX_RING_SIZE - 1) ||
|
|
(ering->tx_pending <= MAX_SKB_FRAGS) ||
|
|
((tp->tg3_flags2 & TG3_FLG2_TSO_BUG) &&
|
|
(ering->tx_pending <= (MAX_SKB_FRAGS * 3))))
|
|
return -EINVAL;
|
|
|
|
if (netif_running(dev)) {
|
|
tg3_phy_stop(tp);
|
|
tg3_netif_stop(tp);
|
|
irq_sync = 1;
|
|
}
|
|
|
|
tg3_full_lock(tp, irq_sync);
|
|
|
|
tp->rx_pending = ering->rx_pending;
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_MAX_RXPEND_64) &&
|
|
tp->rx_pending > 63)
|
|
tp->rx_pending = 63;
|
|
tp->rx_jumbo_pending = ering->rx_jumbo_pending;
|
|
tp->tx_pending = ering->tx_pending;
|
|
|
|
if (netif_running(dev)) {
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
err = tg3_restart_hw(tp, 1);
|
|
if (!err)
|
|
tg3_netif_start(tp);
|
|
}
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
if (irq_sync && !err)
|
|
tg3_phy_start(tp);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;
|
|
|
|
if (tp->link_config.active_flowctrl & FLOW_CTRL_RX)
|
|
epause->rx_pause = 1;
|
|
else
|
|
epause->rx_pause = 0;
|
|
|
|
if (tp->link_config.active_flowctrl & FLOW_CTRL_TX)
|
|
epause->tx_pause = 1;
|
|
else
|
|
epause->tx_pause = 0;
|
|
}
|
|
|
|
static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int err = 0;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
|
|
return -EAGAIN;
|
|
|
|
if (epause->autoneg) {
|
|
u32 newadv;
|
|
struct phy_device *phydev;
|
|
|
|
phydev = tp->mdio_bus->phy_map[PHY_ADDR];
|
|
|
|
if (epause->rx_pause) {
|
|
if (epause->tx_pause)
|
|
newadv = ADVERTISED_Pause;
|
|
else
|
|
newadv = ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause;
|
|
} else if (epause->tx_pause) {
|
|
newadv = ADVERTISED_Asym_Pause;
|
|
} else
|
|
newadv = 0;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
|
|
u32 oldadv = phydev->advertising &
|
|
(ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause);
|
|
if (oldadv != newadv) {
|
|
phydev->advertising &=
|
|
~(ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause);
|
|
phydev->advertising |= newadv;
|
|
err = phy_start_aneg(phydev);
|
|
}
|
|
} else {
|
|
tp->link_config.advertising &=
|
|
~(ADVERTISED_Pause |
|
|
ADVERTISED_Asym_Pause);
|
|
tp->link_config.advertising |= newadv;
|
|
}
|
|
} else {
|
|
if (epause->rx_pause)
|
|
tp->link_config.flowctrl |= FLOW_CTRL_RX;
|
|
else
|
|
tp->link_config.flowctrl &= ~FLOW_CTRL_RX;
|
|
|
|
if (epause->tx_pause)
|
|
tp->link_config.flowctrl |= FLOW_CTRL_TX;
|
|
else
|
|
tp->link_config.flowctrl &= ~FLOW_CTRL_TX;
|
|
|
|
if (netif_running(dev))
|
|
tg3_setup_flow_control(tp, 0, 0);
|
|
}
|
|
} else {
|
|
int irq_sync = 0;
|
|
|
|
if (netif_running(dev)) {
|
|
tg3_netif_stop(tp);
|
|
irq_sync = 1;
|
|
}
|
|
|
|
tg3_full_lock(tp, irq_sync);
|
|
|
|
if (epause->autoneg)
|
|
tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
|
|
else
|
|
tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
|
|
if (epause->rx_pause)
|
|
tp->link_config.flowctrl |= FLOW_CTRL_RX;
|
|
else
|
|
tp->link_config.flowctrl &= ~FLOW_CTRL_RX;
|
|
if (epause->tx_pause)
|
|
tp->link_config.flowctrl |= FLOW_CTRL_TX;
|
|
else
|
|
tp->link_config.flowctrl &= ~FLOW_CTRL_TX;
|
|
|
|
if (netif_running(dev)) {
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
err = tg3_restart_hw(tp, 1);
|
|
if (!err)
|
|
tg3_netif_start(tp);
|
|
}
|
|
|
|
tg3_full_unlock(tp);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static u32 tg3_get_rx_csum(struct net_device *dev)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
return (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0;
|
|
}
|
|
|
|
static int tg3_set_rx_csum(struct net_device *dev, u32 data)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) {
|
|
if (data != 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
if (data)
|
|
tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
|
|
else
|
|
tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
|
|
spin_unlock_bh(&tp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_set_tx_csum(struct net_device *dev, u32 data)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) {
|
|
if (data != 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
|
|
ethtool_op_set_tx_ipv6_csum(dev, data);
|
|
else
|
|
ethtool_op_set_tx_csum(dev, data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_get_sset_count (struct net_device *dev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_TEST:
|
|
return TG3_NUM_TEST;
|
|
case ETH_SS_STATS:
|
|
return TG3_NUM_STATS;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void tg3_get_strings (struct net_device *dev, u32 stringset, u8 *buf)
|
|
{
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
memcpy(buf, ðtool_stats_keys, sizeof(ethtool_stats_keys));
|
|
break;
|
|
case ETH_SS_TEST:
|
|
memcpy(buf, ðtool_test_keys, sizeof(ethtool_test_keys));
|
|
break;
|
|
default:
|
|
WARN_ON(1); /* we need a WARN() */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int tg3_phys_id(struct net_device *dev, u32 data)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int i;
|
|
|
|
if (!netif_running(tp->dev))
|
|
return -EAGAIN;
|
|
|
|
if (data == 0)
|
|
data = UINT_MAX / 2;
|
|
|
|
for (i = 0; i < (data * 2); i++) {
|
|
if ((i % 2) == 0)
|
|
tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
|
|
LED_CTRL_1000MBPS_ON |
|
|
LED_CTRL_100MBPS_ON |
|
|
LED_CTRL_10MBPS_ON |
|
|
LED_CTRL_TRAFFIC_OVERRIDE |
|
|
LED_CTRL_TRAFFIC_BLINK |
|
|
LED_CTRL_TRAFFIC_LED);
|
|
|
|
else
|
|
tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |
|
|
LED_CTRL_TRAFFIC_OVERRIDE);
|
|
|
|
if (msleep_interruptible(500))
|
|
break;
|
|
}
|
|
tw32(MAC_LED_CTRL, tp->led_ctrl);
|
|
return 0;
|
|
}
|
|
|
|
static void tg3_get_ethtool_stats (struct net_device *dev,
|
|
struct ethtool_stats *estats, u64 *tmp_stats)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats));
|
|
}
|
|
|
|
#define NVRAM_TEST_SIZE 0x100
|
|
#define NVRAM_SELFBOOT_FORMAT1_0_SIZE 0x14
|
|
#define NVRAM_SELFBOOT_FORMAT1_2_SIZE 0x18
|
|
#define NVRAM_SELFBOOT_FORMAT1_3_SIZE 0x1c
|
|
#define NVRAM_SELFBOOT_HW_SIZE 0x20
|
|
#define NVRAM_SELFBOOT_DATA_SIZE 0x1c
|
|
|
|
static int tg3_test_nvram(struct tg3 *tp)
|
|
{
|
|
u32 csum, magic;
|
|
__be32 *buf;
|
|
int i, j, k, err = 0, size;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM)
|
|
return 0;
|
|
|
|
if (tg3_nvram_read(tp, 0, &magic) != 0)
|
|
return -EIO;
|
|
|
|
if (magic == TG3_EEPROM_MAGIC)
|
|
size = NVRAM_TEST_SIZE;
|
|
else if ((magic & TG3_EEPROM_MAGIC_FW_MSK) == TG3_EEPROM_MAGIC_FW) {
|
|
if ((magic & TG3_EEPROM_SB_FORMAT_MASK) ==
|
|
TG3_EEPROM_SB_FORMAT_1) {
|
|
switch (magic & TG3_EEPROM_SB_REVISION_MASK) {
|
|
case TG3_EEPROM_SB_REVISION_0:
|
|
size = NVRAM_SELFBOOT_FORMAT1_0_SIZE;
|
|
break;
|
|
case TG3_EEPROM_SB_REVISION_2:
|
|
size = NVRAM_SELFBOOT_FORMAT1_2_SIZE;
|
|
break;
|
|
case TG3_EEPROM_SB_REVISION_3:
|
|
size = NVRAM_SELFBOOT_FORMAT1_3_SIZE;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
} else
|
|
return 0;
|
|
} else if ((magic & TG3_EEPROM_MAGIC_HW_MSK) == TG3_EEPROM_MAGIC_HW)
|
|
size = NVRAM_SELFBOOT_HW_SIZE;
|
|
else
|
|
return -EIO;
|
|
|
|
buf = kmalloc(size, GFP_KERNEL);
|
|
if (buf == NULL)
|
|
return -ENOMEM;
|
|
|
|
err = -EIO;
|
|
for (i = 0, j = 0; i < size; i += 4, j++) {
|
|
err = tg3_nvram_read_be32(tp, i, &buf[j]);
|
|
if (err)
|
|
break;
|
|
}
|
|
if (i < size)
|
|
goto out;
|
|
|
|
/* Selfboot format */
|
|
magic = be32_to_cpu(buf[0]);
|
|
if ((magic & TG3_EEPROM_MAGIC_FW_MSK) ==
|
|
TG3_EEPROM_MAGIC_FW) {
|
|
u8 *buf8 = (u8 *) buf, csum8 = 0;
|
|
|
|
if ((magic & TG3_EEPROM_SB_REVISION_MASK) ==
|
|
TG3_EEPROM_SB_REVISION_2) {
|
|
/* For rev 2, the csum doesn't include the MBA. */
|
|
for (i = 0; i < TG3_EEPROM_SB_F1R2_MBA_OFF; i++)
|
|
csum8 += buf8[i];
|
|
for (i = TG3_EEPROM_SB_F1R2_MBA_OFF + 4; i < size; i++)
|
|
csum8 += buf8[i];
|
|
} else {
|
|
for (i = 0; i < size; i++)
|
|
csum8 += buf8[i];
|
|
}
|
|
|
|
if (csum8 == 0) {
|
|
err = 0;
|
|
goto out;
|
|
}
|
|
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
if ((magic & TG3_EEPROM_MAGIC_HW_MSK) ==
|
|
TG3_EEPROM_MAGIC_HW) {
|
|
u8 data[NVRAM_SELFBOOT_DATA_SIZE];
|
|
u8 parity[NVRAM_SELFBOOT_DATA_SIZE];
|
|
u8 *buf8 = (u8 *) buf;
|
|
|
|
/* Separate the parity bits and the data bytes. */
|
|
for (i = 0, j = 0, k = 0; i < NVRAM_SELFBOOT_HW_SIZE; i++) {
|
|
if ((i == 0) || (i == 8)) {
|
|
int l;
|
|
u8 msk;
|
|
|
|
for (l = 0, msk = 0x80; l < 7; l++, msk >>= 1)
|
|
parity[k++] = buf8[i] & msk;
|
|
i++;
|
|
}
|
|
else if (i == 16) {
|
|
int l;
|
|
u8 msk;
|
|
|
|
for (l = 0, msk = 0x20; l < 6; l++, msk >>= 1)
|
|
parity[k++] = buf8[i] & msk;
|
|
i++;
|
|
|
|
for (l = 0, msk = 0x80; l < 8; l++, msk >>= 1)
|
|
parity[k++] = buf8[i] & msk;
|
|
i++;
|
|
}
|
|
data[j++] = buf8[i];
|
|
}
|
|
|
|
err = -EIO;
|
|
for (i = 0; i < NVRAM_SELFBOOT_DATA_SIZE; i++) {
|
|
u8 hw8 = hweight8(data[i]);
|
|
|
|
if ((hw8 & 0x1) && parity[i])
|
|
goto out;
|
|
else if (!(hw8 & 0x1) && !parity[i])
|
|
goto out;
|
|
}
|
|
err = 0;
|
|
goto out;
|
|
}
|
|
|
|
/* Bootstrap checksum at offset 0x10 */
|
|
csum = calc_crc((unsigned char *) buf, 0x10);
|
|
if (csum != be32_to_cpu(buf[0x10/4]))
|
|
goto out;
|
|
|
|
/* Manufacturing block starts at offset 0x74, checksum at 0xfc */
|
|
csum = calc_crc((unsigned char *) &buf[0x74/4], 0x88);
|
|
if (csum != be32_to_cpu(buf[0xfc/4]))
|
|
goto out;
|
|
|
|
err = 0;
|
|
|
|
out:
|
|
kfree(buf);
|
|
return err;
|
|
}
|
|
|
|
#define TG3_SERDES_TIMEOUT_SEC 2
|
|
#define TG3_COPPER_TIMEOUT_SEC 6
|
|
|
|
static int tg3_test_link(struct tg3 *tp)
|
|
{
|
|
int i, max;
|
|
|
|
if (!netif_running(tp->dev))
|
|
return -ENODEV;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)
|
|
max = TG3_SERDES_TIMEOUT_SEC;
|
|
else
|
|
max = TG3_COPPER_TIMEOUT_SEC;
|
|
|
|
for (i = 0; i < max; i++) {
|
|
if (netif_carrier_ok(tp->dev))
|
|
return 0;
|
|
|
|
if (msleep_interruptible(1000))
|
|
break;
|
|
}
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
/* Only test the commonly used registers */
|
|
static int tg3_test_registers(struct tg3 *tp)
|
|
{
|
|
int i, is_5705, is_5750;
|
|
u32 offset, read_mask, write_mask, val, save_val, read_val;
|
|
static struct {
|
|
u16 offset;
|
|
u16 flags;
|
|
#define TG3_FL_5705 0x1
|
|
#define TG3_FL_NOT_5705 0x2
|
|
#define TG3_FL_NOT_5788 0x4
|
|
#define TG3_FL_NOT_5750 0x8
|
|
u32 read_mask;
|
|
u32 write_mask;
|
|
} reg_tbl[] = {
|
|
/* MAC Control Registers */
|
|
{ MAC_MODE, TG3_FL_NOT_5705,
|
|
0x00000000, 0x00ef6f8c },
|
|
{ MAC_MODE, TG3_FL_5705,
|
|
0x00000000, 0x01ef6b8c },
|
|
{ MAC_STATUS, TG3_FL_NOT_5705,
|
|
0x03800107, 0x00000000 },
|
|
{ MAC_STATUS, TG3_FL_5705,
|
|
0x03800100, 0x00000000 },
|
|
{ MAC_ADDR_0_HIGH, 0x0000,
|
|
0x00000000, 0x0000ffff },
|
|
{ MAC_ADDR_0_LOW, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
{ MAC_RX_MTU_SIZE, 0x0000,
|
|
0x00000000, 0x0000ffff },
|
|
{ MAC_TX_MODE, 0x0000,
|
|
0x00000000, 0x00000070 },
|
|
{ MAC_TX_LENGTHS, 0x0000,
|
|
0x00000000, 0x00003fff },
|
|
{ MAC_RX_MODE, TG3_FL_NOT_5705,
|
|
0x00000000, 0x000007fc },
|
|
{ MAC_RX_MODE, TG3_FL_5705,
|
|
0x00000000, 0x000007dc },
|
|
{ MAC_HASH_REG_0, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
{ MAC_HASH_REG_1, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
{ MAC_HASH_REG_2, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
{ MAC_HASH_REG_3, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
|
|
/* Receive Data and Receive BD Initiator Control Registers. */
|
|
{ RCVDBDI_JUMBO_BD+0, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ RCVDBDI_JUMBO_BD+4, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ RCVDBDI_JUMBO_BD+8, TG3_FL_NOT_5705,
|
|
0x00000000, 0x00000003 },
|
|
{ RCVDBDI_JUMBO_BD+0xc, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ RCVDBDI_STD_BD+0, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
{ RCVDBDI_STD_BD+4, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
{ RCVDBDI_STD_BD+8, 0x0000,
|
|
0x00000000, 0xffff0002 },
|
|
{ RCVDBDI_STD_BD+0xc, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
|
|
/* Receive BD Initiator Control Registers. */
|
|
{ RCVBDI_STD_THRESH, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ RCVBDI_STD_THRESH, TG3_FL_5705,
|
|
0x00000000, 0x000003ff },
|
|
{ RCVBDI_JUMBO_THRESH, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
|
|
/* Host Coalescing Control Registers. */
|
|
{ HOSTCC_MODE, TG3_FL_NOT_5705,
|
|
0x00000000, 0x00000004 },
|
|
{ HOSTCC_MODE, TG3_FL_5705,
|
|
0x00000000, 0x000000f6 },
|
|
{ HOSTCC_RXCOL_TICKS, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_RXCOL_TICKS, TG3_FL_5705,
|
|
0x00000000, 0x000003ff },
|
|
{ HOSTCC_TXCOL_TICKS, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_TXCOL_TICKS, TG3_FL_5705,
|
|
0x00000000, 0x000003ff },
|
|
{ HOSTCC_RXMAX_FRAMES, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_RXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788,
|
|
0x00000000, 0x000000ff },
|
|
{ HOSTCC_TXMAX_FRAMES, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_TXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788,
|
|
0x00000000, 0x000000ff },
|
|
{ HOSTCC_RXCOAL_TICK_INT, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_TXCOAL_TICK_INT, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_RXCOAL_MAXF_INT, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_RXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788,
|
|
0x00000000, 0x000000ff },
|
|
{ HOSTCC_TXCOAL_MAXF_INT, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_TXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788,
|
|
0x00000000, 0x000000ff },
|
|
{ HOSTCC_STAT_COAL_TICKS, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_STATS_BLK_HOST_ADDR, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_STATS_BLK_HOST_ADDR+4, TG3_FL_NOT_5705,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_STATUS_BLK_HOST_ADDR, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_STATUS_BLK_HOST_ADDR+4, 0x0000,
|
|
0x00000000, 0xffffffff },
|
|
{ HOSTCC_STATS_BLK_NIC_ADDR, 0x0000,
|
|
0xffffffff, 0x00000000 },
|
|
{ HOSTCC_STATUS_BLK_NIC_ADDR, 0x0000,
|
|
0xffffffff, 0x00000000 },
|
|
|
|
/* Buffer Manager Control Registers. */
|
|
{ BUFMGR_MB_POOL_ADDR, TG3_FL_NOT_5750,
|
|
0x00000000, 0x007fff80 },
|
|
{ BUFMGR_MB_POOL_SIZE, TG3_FL_NOT_5750,
|
|
0x00000000, 0x007fffff },
|
|
{ BUFMGR_MB_RDMA_LOW_WATER, 0x0000,
|
|
0x00000000, 0x0000003f },
|
|
{ BUFMGR_MB_MACRX_LOW_WATER, 0x0000,
|
|
0x00000000, 0x000001ff },
|
|
{ BUFMGR_MB_HIGH_WATER, 0x0000,
|
|
0x00000000, 0x000001ff },
|
|
{ BUFMGR_DMA_DESC_POOL_ADDR, TG3_FL_NOT_5705,
|
|
0xffffffff, 0x00000000 },
|
|
{ BUFMGR_DMA_DESC_POOL_SIZE, TG3_FL_NOT_5705,
|
|
0xffffffff, 0x00000000 },
|
|
|
|
/* Mailbox Registers */
|
|
{ GRCMBOX_RCVSTD_PROD_IDX+4, 0x0000,
|
|
0x00000000, 0x000001ff },
|
|
{ GRCMBOX_RCVJUMBO_PROD_IDX+4, TG3_FL_NOT_5705,
|
|
0x00000000, 0x000001ff },
|
|
{ GRCMBOX_RCVRET_CON_IDX_0+4, 0x0000,
|
|
0x00000000, 0x000007ff },
|
|
{ GRCMBOX_SNDHOST_PROD_IDX_0+4, 0x0000,
|
|
0x00000000, 0x000001ff },
|
|
|
|
{ 0xffff, 0x0000, 0x00000000, 0x00000000 },
|
|
};
|
|
|
|
is_5705 = is_5750 = 0;
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
|
|
is_5705 = 1;
|
|
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
|
|
is_5750 = 1;
|
|
}
|
|
|
|
for (i = 0; reg_tbl[i].offset != 0xffff; i++) {
|
|
if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705))
|
|
continue;
|
|
|
|
if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705))
|
|
continue;
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
|
|
(reg_tbl[i].flags & TG3_FL_NOT_5788))
|
|
continue;
|
|
|
|
if (is_5750 && (reg_tbl[i].flags & TG3_FL_NOT_5750))
|
|
continue;
|
|
|
|
offset = (u32) reg_tbl[i].offset;
|
|
read_mask = reg_tbl[i].read_mask;
|
|
write_mask = reg_tbl[i].write_mask;
|
|
|
|
/* Save the original register content */
|
|
save_val = tr32(offset);
|
|
|
|
/* Determine the read-only value. */
|
|
read_val = save_val & read_mask;
|
|
|
|
/* Write zero to the register, then make sure the read-only bits
|
|
* are not changed and the read/write bits are all zeros.
|
|
*/
|
|
tw32(offset, 0);
|
|
|
|
val = tr32(offset);
|
|
|
|
/* Test the read-only and read/write bits. */
|
|
if (((val & read_mask) != read_val) || (val & write_mask))
|
|
goto out;
|
|
|
|
/* Write ones to all the bits defined by RdMask and WrMask, then
|
|
* make sure the read-only bits are not changed and the
|
|
* read/write bits are all ones.
|
|
*/
|
|
tw32(offset, read_mask | write_mask);
|
|
|
|
val = tr32(offset);
|
|
|
|
/* Test the read-only bits. */
|
|
if ((val & read_mask) != read_val)
|
|
goto out;
|
|
|
|
/* Test the read/write bits. */
|
|
if ((val & write_mask) != write_mask)
|
|
goto out;
|
|
|
|
tw32(offset, save_val);
|
|
}
|
|
|
|
return 0;
|
|
|
|
out:
|
|
if (netif_msg_hw(tp))
|
|
printk(KERN_ERR PFX "Register test failed at offset %x\n",
|
|
offset);
|
|
tw32(offset, save_val);
|
|
return -EIO;
|
|
}
|
|
|
|
static int tg3_do_mem_test(struct tg3 *tp, u32 offset, u32 len)
|
|
{
|
|
static const u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a };
|
|
int i;
|
|
u32 j;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(test_pattern); i++) {
|
|
for (j = 0; j < len; j += 4) {
|
|
u32 val;
|
|
|
|
tg3_write_mem(tp, offset + j, test_pattern[i]);
|
|
tg3_read_mem(tp, offset + j, &val);
|
|
if (val != test_pattern[i])
|
|
return -EIO;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_test_memory(struct tg3 *tp)
|
|
{
|
|
static struct mem_entry {
|
|
u32 offset;
|
|
u32 len;
|
|
} mem_tbl_570x[] = {
|
|
{ 0x00000000, 0x00b50},
|
|
{ 0x00002000, 0x1c000},
|
|
{ 0xffffffff, 0x00000}
|
|
}, mem_tbl_5705[] = {
|
|
{ 0x00000100, 0x0000c},
|
|
{ 0x00000200, 0x00008},
|
|
{ 0x00004000, 0x00800},
|
|
{ 0x00006000, 0x01000},
|
|
{ 0x00008000, 0x02000},
|
|
{ 0x00010000, 0x0e000},
|
|
{ 0xffffffff, 0x00000}
|
|
}, mem_tbl_5755[] = {
|
|
{ 0x00000200, 0x00008},
|
|
{ 0x00004000, 0x00800},
|
|
{ 0x00006000, 0x00800},
|
|
{ 0x00008000, 0x02000},
|
|
{ 0x00010000, 0x0c000},
|
|
{ 0xffffffff, 0x00000}
|
|
}, mem_tbl_5906[] = {
|
|
{ 0x00000200, 0x00008},
|
|
{ 0x00004000, 0x00400},
|
|
{ 0x00006000, 0x00400},
|
|
{ 0x00008000, 0x01000},
|
|
{ 0x00010000, 0x01000},
|
|
{ 0xffffffff, 0x00000}
|
|
};
|
|
struct mem_entry *mem_tbl;
|
|
int err = 0;
|
|
int i;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
|
|
mem_tbl = mem_tbl_5755;
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
|
|
mem_tbl = mem_tbl_5906;
|
|
else if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
|
|
mem_tbl = mem_tbl_5705;
|
|
else
|
|
mem_tbl = mem_tbl_570x;
|
|
|
|
for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) {
|
|
if ((err = tg3_do_mem_test(tp, mem_tbl[i].offset,
|
|
mem_tbl[i].len)) != 0)
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
#define TG3_MAC_LOOPBACK 0
|
|
#define TG3_PHY_LOOPBACK 1
|
|
|
|
static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
|
|
{
|
|
u32 mac_mode, rx_start_idx, rx_idx, tx_idx, opaque_key;
|
|
u32 desc_idx;
|
|
struct sk_buff *skb, *rx_skb;
|
|
u8 *tx_data;
|
|
dma_addr_t map;
|
|
int num_pkts, tx_len, rx_len, i, err;
|
|
struct tg3_rx_buffer_desc *desc;
|
|
|
|
if (loopback_mode == TG3_MAC_LOOPBACK) {
|
|
/* HW errata - mac loopback fails in some cases on 5780.
|
|
* Normal traffic and PHY loopback are not affected by
|
|
* errata.
|
|
*/
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
|
|
return 0;
|
|
|
|
mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
|
|
MAC_MODE_PORT_INT_LPBACK;
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
|
|
mac_mode |= MAC_MODE_LINK_POLARITY;
|
|
if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
|
|
mac_mode |= MAC_MODE_PORT_MODE_MII;
|
|
else
|
|
mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
|
tw32(MAC_MODE, mac_mode);
|
|
} else if (loopback_mode == TG3_PHY_LOOPBACK) {
|
|
u32 val;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
u32 phytest;
|
|
|
|
if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phytest)) {
|
|
u32 phy;
|
|
|
|
tg3_writephy(tp, MII_TG3_EPHY_TEST,
|
|
phytest | MII_TG3_EPHY_SHADOW_EN);
|
|
if (!tg3_readphy(tp, 0x1b, &phy))
|
|
tg3_writephy(tp, 0x1b, phy & ~0x20);
|
|
tg3_writephy(tp, MII_TG3_EPHY_TEST, phytest);
|
|
}
|
|
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
|
|
} else
|
|
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
|
|
|
|
tg3_phy_toggle_automdix(tp, 0);
|
|
|
|
tg3_writephy(tp, MII_BMCR, val);
|
|
udelay(40);
|
|
|
|
mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x1800);
|
|
mac_mode |= MAC_MODE_PORT_MODE_MII;
|
|
} else
|
|
mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
|
|
|
/* reset to prevent losing 1st rx packet intermittently */
|
|
if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
|
|
tw32_f(MAC_RX_MODE, RX_MODE_RESET);
|
|
udelay(10);
|
|
tw32_f(MAC_RX_MODE, tp->rx_mode);
|
|
}
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
|
|
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)
|
|
mac_mode &= ~MAC_MODE_LINK_POLARITY;
|
|
else if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411)
|
|
mac_mode |= MAC_MODE_LINK_POLARITY;
|
|
tg3_writephy(tp, MII_TG3_EXT_CTRL,
|
|
MII_TG3_EXT_CTRL_LNK3_LED_MODE);
|
|
}
|
|
tw32(MAC_MODE, mac_mode);
|
|
}
|
|
else
|
|
return -EINVAL;
|
|
|
|
err = -EIO;
|
|
|
|
tx_len = 1514;
|
|
skb = netdev_alloc_skb(tp->dev, tx_len);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
tx_data = skb_put(skb, tx_len);
|
|
memcpy(tx_data, tp->dev->dev_addr, 6);
|
|
memset(tx_data + 6, 0x0, 8);
|
|
|
|
tw32(MAC_RX_MTU_SIZE, tx_len + 4);
|
|
|
|
for (i = 14; i < tx_len; i++)
|
|
tx_data[i] = (u8) (i & 0xff);
|
|
|
|
map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE);
|
|
|
|
tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
|
|
HOSTCC_MODE_NOW);
|
|
|
|
udelay(10);
|
|
|
|
rx_start_idx = tp->hw_status->idx[0].rx_producer;
|
|
|
|
num_pkts = 0;
|
|
|
|
tg3_set_txd(tp, tp->tx_prod, map, tx_len, 0, 1);
|
|
|
|
tp->tx_prod++;
|
|
num_pkts++;
|
|
|
|
tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW,
|
|
tp->tx_prod);
|
|
tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
|
|
|
|
udelay(10);
|
|
|
|
/* 250 usec to allow enough time on some 10/100 Mbps devices. */
|
|
for (i = 0; i < 25; i++) {
|
|
tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
|
|
HOSTCC_MODE_NOW);
|
|
|
|
udelay(10);
|
|
|
|
tx_idx = tp->hw_status->idx[0].tx_consumer;
|
|
rx_idx = tp->hw_status->idx[0].rx_producer;
|
|
if ((tx_idx == tp->tx_prod) &&
|
|
(rx_idx == (rx_start_idx + num_pkts)))
|
|
break;
|
|
}
|
|
|
|
pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(skb);
|
|
|
|
if (tx_idx != tp->tx_prod)
|
|
goto out;
|
|
|
|
if (rx_idx != rx_start_idx + num_pkts)
|
|
goto out;
|
|
|
|
desc = &tp->rx_rcb[rx_start_idx];
|
|
desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
|
|
opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
|
|
if (opaque_key != RXD_OPAQUE_RING_STD)
|
|
goto out;
|
|
|
|
if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
|
|
(desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII))
|
|
goto out;
|
|
|
|
rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4;
|
|
if (rx_len != tx_len)
|
|
goto out;
|
|
|
|
rx_skb = tp->rx_std_buffers[desc_idx].skb;
|
|
|
|
map = pci_unmap_addr(&tp->rx_std_buffers[desc_idx], mapping);
|
|
pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE);
|
|
|
|
for (i = 14; i < tx_len; i++) {
|
|
if (*(rx_skb->data + i) != (u8) (i & 0xff))
|
|
goto out;
|
|
}
|
|
err = 0;
|
|
|
|
/* tg3_free_rings will unmap and free the rx_skb */
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
#define TG3_MAC_LOOPBACK_FAILED 1
|
|
#define TG3_PHY_LOOPBACK_FAILED 2
|
|
#define TG3_LOOPBACK_FAILED (TG3_MAC_LOOPBACK_FAILED | \
|
|
TG3_PHY_LOOPBACK_FAILED)
|
|
|
|
static int tg3_test_loopback(struct tg3 *tp)
|
|
{
|
|
int err = 0;
|
|
u32 cpmuctrl = 0;
|
|
|
|
if (!netif_running(tp->dev))
|
|
return TG3_LOOPBACK_FAILED;
|
|
|
|
err = tg3_reset_hw(tp, 1);
|
|
if (err)
|
|
return TG3_LOOPBACK_FAILED;
|
|
|
|
/* Turn off gphy autopowerdown. */
|
|
if (tp->tg3_flags3 & TG3_FLG3_PHY_ENABLE_APD)
|
|
tg3_phy_toggle_apd(tp, false);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) {
|
|
int i;
|
|
u32 status;
|
|
|
|
tw32(TG3_CPMU_MUTEX_REQ, CPMU_MUTEX_REQ_DRIVER);
|
|
|
|
/* Wait for up to 40 microseconds to acquire lock. */
|
|
for (i = 0; i < 4; i++) {
|
|
status = tr32(TG3_CPMU_MUTEX_GNT);
|
|
if (status == CPMU_MUTEX_GNT_DRIVER)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (status != CPMU_MUTEX_GNT_DRIVER)
|
|
return TG3_LOOPBACK_FAILED;
|
|
|
|
/* Turn off link-based power management. */
|
|
cpmuctrl = tr32(TG3_CPMU_CTRL);
|
|
tw32(TG3_CPMU_CTRL,
|
|
cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
|
|
CPMU_CTRL_LINK_AWARE_MODE));
|
|
}
|
|
|
|
if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
|
|
err |= TG3_MAC_LOOPBACK_FAILED;
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT) {
|
|
tw32(TG3_CPMU_CTRL, cpmuctrl);
|
|
|
|
/* Release the mutex */
|
|
tw32(TG3_CPMU_MUTEX_GNT, CPMU_MUTEX_GNT_DRIVER);
|
|
}
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
|
|
!(tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)) {
|
|
if (tg3_run_loopback(tp, TG3_PHY_LOOPBACK))
|
|
err |= TG3_PHY_LOOPBACK_FAILED;
|
|
}
|
|
|
|
/* Re-enable gphy autopowerdown. */
|
|
if (tp->tg3_flags3 & TG3_FLG3_PHY_ENABLE_APD)
|
|
tg3_phy_toggle_apd(tp, true);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
|
|
u64 *data)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (tp->link_config.phy_is_low_power)
|
|
tg3_set_power_state(tp, PCI_D0);
|
|
|
|
memset(data, 0, sizeof(u64) * TG3_NUM_TEST);
|
|
|
|
if (tg3_test_nvram(tp) != 0) {
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
data[0] = 1;
|
|
}
|
|
if (tg3_test_link(tp) != 0) {
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
data[1] = 1;
|
|
}
|
|
if (etest->flags & ETH_TEST_FL_OFFLINE) {
|
|
int err, err2 = 0, irq_sync = 0;
|
|
|
|
if (netif_running(dev)) {
|
|
tg3_phy_stop(tp);
|
|
tg3_netif_stop(tp);
|
|
irq_sync = 1;
|
|
}
|
|
|
|
tg3_full_lock(tp, irq_sync);
|
|
|
|
tg3_halt(tp, RESET_KIND_SUSPEND, 1);
|
|
err = tg3_nvram_lock(tp);
|
|
tg3_halt_cpu(tp, RX_CPU_BASE);
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
|
|
tg3_halt_cpu(tp, TX_CPU_BASE);
|
|
if (!err)
|
|
tg3_nvram_unlock(tp);
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
|
|
tg3_phy_reset(tp);
|
|
|
|
if (tg3_test_registers(tp) != 0) {
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
data[2] = 1;
|
|
}
|
|
if (tg3_test_memory(tp) != 0) {
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
data[3] = 1;
|
|
}
|
|
if ((data[4] = tg3_test_loopback(tp)) != 0)
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
if (tg3_test_interrupt(tp) != 0) {
|
|
etest->flags |= ETH_TEST_FL_FAILED;
|
|
data[5] = 1;
|
|
}
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
if (netif_running(dev)) {
|
|
tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
|
|
err2 = tg3_restart_hw(tp, 1);
|
|
if (!err2)
|
|
tg3_netif_start(tp);
|
|
}
|
|
|
|
tg3_full_unlock(tp);
|
|
|
|
if (irq_sync && !err2)
|
|
tg3_phy_start(tp);
|
|
}
|
|
if (tp->link_config.phy_is_low_power)
|
|
tg3_set_power_state(tp, PCI_D3hot);
|
|
|
|
}
|
|
|
|
static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int err;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
|
|
return -EAGAIN;
|
|
return phy_mii_ioctl(tp->mdio_bus->phy_map[PHY_ADDR], data, cmd);
|
|
}
|
|
|
|
switch(cmd) {
|
|
case SIOCGMIIPHY:
|
|
data->phy_id = PHY_ADDR;
|
|
|
|
/* fallthru */
|
|
case SIOCGMIIREG: {
|
|
u32 mii_regval;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
|
|
break; /* We have no PHY */
|
|
|
|
if (tp->link_config.phy_is_low_power)
|
|
return -EAGAIN;
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
|
|
spin_unlock_bh(&tp->lock);
|
|
|
|
data->val_out = mii_regval;
|
|
|
|
return err;
|
|
}
|
|
|
|
case SIOCSMIIREG:
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
|
|
break; /* We have no PHY */
|
|
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
|
|
if (tp->link_config.phy_is_low_power)
|
|
return -EAGAIN;
|
|
|
|
spin_lock_bh(&tp->lock);
|
|
err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
|
|
spin_unlock_bh(&tp->lock);
|
|
|
|
return err;
|
|
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
#if TG3_VLAN_TAG_USED
|
|
static void tg3_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev)) {
|
|
tp->vlgrp = grp;
|
|
return;
|
|
}
|
|
|
|
tg3_netif_stop(tp);
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
tp->vlgrp = grp;
|
|
|
|
/* Update RX_MODE_KEEP_VLAN_TAG bit in RX_MODE register. */
|
|
__tg3_set_rx_mode(dev);
|
|
|
|
tg3_netif_start(tp);
|
|
|
|
tg3_full_unlock(tp);
|
|
}
|
|
#endif
|
|
|
|
static int tg3_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
memcpy(ec, &tp->coal, sizeof(*ec));
|
|
return 0;
|
|
}
|
|
|
|
static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)
|
|
{
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
u32 max_rxcoal_tick_int = 0, max_txcoal_tick_int = 0;
|
|
u32 max_stat_coal_ticks = 0, min_stat_coal_ticks = 0;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
|
|
max_rxcoal_tick_int = MAX_RXCOAL_TICK_INT;
|
|
max_txcoal_tick_int = MAX_TXCOAL_TICK_INT;
|
|
max_stat_coal_ticks = MAX_STAT_COAL_TICKS;
|
|
min_stat_coal_ticks = MIN_STAT_COAL_TICKS;
|
|
}
|
|
|
|
if ((ec->rx_coalesce_usecs > MAX_RXCOL_TICKS) ||
|
|
(ec->tx_coalesce_usecs > MAX_TXCOL_TICKS) ||
|
|
(ec->rx_max_coalesced_frames > MAX_RXMAX_FRAMES) ||
|
|
(ec->tx_max_coalesced_frames > MAX_TXMAX_FRAMES) ||
|
|
(ec->rx_coalesce_usecs_irq > max_rxcoal_tick_int) ||
|
|
(ec->tx_coalesce_usecs_irq > max_txcoal_tick_int) ||
|
|
(ec->rx_max_coalesced_frames_irq > MAX_RXCOAL_MAXF_INT) ||
|
|
(ec->tx_max_coalesced_frames_irq > MAX_TXCOAL_MAXF_INT) ||
|
|
(ec->stats_block_coalesce_usecs > max_stat_coal_ticks) ||
|
|
(ec->stats_block_coalesce_usecs < min_stat_coal_ticks))
|
|
return -EINVAL;
|
|
|
|
/* No rx interrupts will be generated if both are zero */
|
|
if ((ec->rx_coalesce_usecs == 0) &&
|
|
(ec->rx_max_coalesced_frames == 0))
|
|
return -EINVAL;
|
|
|
|
/* No tx interrupts will be generated if both are zero */
|
|
if ((ec->tx_coalesce_usecs == 0) &&
|
|
(ec->tx_max_coalesced_frames == 0))
|
|
return -EINVAL;
|
|
|
|
/* Only copy relevant parameters, ignore all others. */
|
|
tp->coal.rx_coalesce_usecs = ec->rx_coalesce_usecs;
|
|
tp->coal.tx_coalesce_usecs = ec->tx_coalesce_usecs;
|
|
tp->coal.rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
|
|
tp->coal.tx_max_coalesced_frames = ec->tx_max_coalesced_frames;
|
|
tp->coal.rx_coalesce_usecs_irq = ec->rx_coalesce_usecs_irq;
|
|
tp->coal.tx_coalesce_usecs_irq = ec->tx_coalesce_usecs_irq;
|
|
tp->coal.rx_max_coalesced_frames_irq = ec->rx_max_coalesced_frames_irq;
|
|
tp->coal.tx_max_coalesced_frames_irq = ec->tx_max_coalesced_frames_irq;
|
|
tp->coal.stats_block_coalesce_usecs = ec->stats_block_coalesce_usecs;
|
|
|
|
if (netif_running(dev)) {
|
|
tg3_full_lock(tp, 0);
|
|
__tg3_set_coalesce(tp, &tp->coal);
|
|
tg3_full_unlock(tp);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops tg3_ethtool_ops = {
|
|
.get_settings = tg3_get_settings,
|
|
.set_settings = tg3_set_settings,
|
|
.get_drvinfo = tg3_get_drvinfo,
|
|
.get_regs_len = tg3_get_regs_len,
|
|
.get_regs = tg3_get_regs,
|
|
.get_wol = tg3_get_wol,
|
|
.set_wol = tg3_set_wol,
|
|
.get_msglevel = tg3_get_msglevel,
|
|
.set_msglevel = tg3_set_msglevel,
|
|
.nway_reset = tg3_nway_reset,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_eeprom_len = tg3_get_eeprom_len,
|
|
.get_eeprom = tg3_get_eeprom,
|
|
.set_eeprom = tg3_set_eeprom,
|
|
.get_ringparam = tg3_get_ringparam,
|
|
.set_ringparam = tg3_set_ringparam,
|
|
.get_pauseparam = tg3_get_pauseparam,
|
|
.set_pauseparam = tg3_set_pauseparam,
|
|
.get_rx_csum = tg3_get_rx_csum,
|
|
.set_rx_csum = tg3_set_rx_csum,
|
|
.set_tx_csum = tg3_set_tx_csum,
|
|
.set_sg = ethtool_op_set_sg,
|
|
.set_tso = tg3_set_tso,
|
|
.self_test = tg3_self_test,
|
|
.get_strings = tg3_get_strings,
|
|
.phys_id = tg3_phys_id,
|
|
.get_ethtool_stats = tg3_get_ethtool_stats,
|
|
.get_coalesce = tg3_get_coalesce,
|
|
.set_coalesce = tg3_set_coalesce,
|
|
.get_sset_count = tg3_get_sset_count,
|
|
};
|
|
|
|
static void __devinit tg3_get_eeprom_size(struct tg3 *tp)
|
|
{
|
|
u32 cursize, val, magic;
|
|
|
|
tp->nvram_size = EEPROM_CHIP_SIZE;
|
|
|
|
if (tg3_nvram_read(tp, 0, &magic) != 0)
|
|
return;
|
|
|
|
if ((magic != TG3_EEPROM_MAGIC) &&
|
|
((magic & TG3_EEPROM_MAGIC_FW_MSK) != TG3_EEPROM_MAGIC_FW) &&
|
|
((magic & TG3_EEPROM_MAGIC_HW_MSK) != TG3_EEPROM_MAGIC_HW))
|
|
return;
|
|
|
|
/*
|
|
* Size the chip by reading offsets at increasing powers of two.
|
|
* When we encounter our validation signature, we know the addressing
|
|
* has wrapped around, and thus have our chip size.
|
|
*/
|
|
cursize = 0x10;
|
|
|
|
while (cursize < tp->nvram_size) {
|
|
if (tg3_nvram_read(tp, cursize, &val) != 0)
|
|
return;
|
|
|
|
if (val == magic)
|
|
break;
|
|
|
|
cursize <<= 1;
|
|
}
|
|
|
|
tp->nvram_size = cursize;
|
|
}
|
|
|
|
static void __devinit tg3_get_nvram_size(struct tg3 *tp)
|
|
{
|
|
u32 val;
|
|
|
|
if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
|
|
tg3_nvram_read(tp, 0, &val) != 0)
|
|
return;
|
|
|
|
/* Selfboot format */
|
|
if (val != TG3_EEPROM_MAGIC) {
|
|
tg3_get_eeprom_size(tp);
|
|
return;
|
|
}
|
|
|
|
if (tg3_nvram_read(tp, 0xf0, &val) == 0) {
|
|
if (val != 0) {
|
|
/* This is confusing. We want to operate on the
|
|
* 16-bit value at offset 0xf2. The tg3_nvram_read()
|
|
* call will read from NVRAM and byteswap the data
|
|
* according to the byteswapping settings for all
|
|
* other register accesses. This ensures the data we
|
|
* want will always reside in the lower 16-bits.
|
|
* However, the data in NVRAM is in LE format, which
|
|
* means the data from the NVRAM read will always be
|
|
* opposite the endianness of the CPU. The 16-bit
|
|
* byteswap then brings the data to CPU endianness.
|
|
*/
|
|
tp->nvram_size = swab16((u16)(val & 0x0000ffff)) * 1024;
|
|
return;
|
|
}
|
|
}
|
|
tp->nvram_size = TG3_NVRAM_SIZE_512KB;
|
|
}
|
|
|
|
static void __devinit tg3_get_nvram_info(struct tg3 *tp)
|
|
{
|
|
u32 nvcfg1;
|
|
|
|
nvcfg1 = tr32(NVRAM_CFG1);
|
|
if (nvcfg1 & NVRAM_CFG1_FLASHIF_ENAB) {
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
}
|
|
else {
|
|
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
|
|
tw32(NVRAM_CFG1, nvcfg1);
|
|
}
|
|
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
|
|
switch (nvcfg1 & NVRAM_CFG1_VENDOR_MASK) {
|
|
case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
break;
|
|
case FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->nvram_pagesize = ATMEL_AT25F512_PAGE_SIZE;
|
|
break;
|
|
case FLASH_VENDOR_ATMEL_EEPROM:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
break;
|
|
case FLASH_VENDOR_ST:
|
|
tp->nvram_jedecnum = JEDEC_ST;
|
|
tp->nvram_pagesize = ST_M45PEX0_PAGE_SIZE;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
break;
|
|
case FLASH_VENDOR_SAIFUN:
|
|
tp->nvram_jedecnum = JEDEC_SAIFUN;
|
|
tp->nvram_pagesize = SAIFUN_SA25F0XX_PAGE_SIZE;
|
|
break;
|
|
case FLASH_VENDOR_SST_SMALL:
|
|
case FLASH_VENDOR_SST_LARGE:
|
|
tp->nvram_jedecnum = JEDEC_SST;
|
|
tp->nvram_pagesize = SST_25VF0X0_PAGE_SIZE;
|
|
break;
|
|
}
|
|
}
|
|
else {
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->nvram_pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
}
|
|
}
|
|
|
|
static void __devinit tg3_get_5752_nvram_info(struct tg3 *tp)
|
|
{
|
|
u32 nvcfg1;
|
|
|
|
nvcfg1 = tr32(NVRAM_CFG1);
|
|
|
|
/* NVRAM protection for TPM */
|
|
if (nvcfg1 & (1 << 27))
|
|
tp->tg3_flags2 |= TG3_FLG2_PROTECTED_NVRAM;
|
|
|
|
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
|
|
case FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ:
|
|
case FLASH_5752VENDOR_ATMEL_EEPROM_376KHZ:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
break;
|
|
case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
break;
|
|
case FLASH_5752VENDOR_ST_M45PE10:
|
|
case FLASH_5752VENDOR_ST_M45PE20:
|
|
case FLASH_5752VENDOR_ST_M45PE40:
|
|
tp->nvram_jedecnum = JEDEC_ST;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
break;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_FLASH) {
|
|
switch (nvcfg1 & NVRAM_CFG1_5752PAGE_SIZE_MASK) {
|
|
case FLASH_5752PAGE_SIZE_256:
|
|
tp->nvram_pagesize = 256;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_512:
|
|
tp->nvram_pagesize = 512;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_1K:
|
|
tp->nvram_pagesize = 1024;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_2K:
|
|
tp->nvram_pagesize = 2048;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_4K:
|
|
tp->nvram_pagesize = 4096;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_264:
|
|
tp->nvram_pagesize = 264;
|
|
break;
|
|
}
|
|
}
|
|
else {
|
|
/* For eeprom, set pagesize to maximum eeprom size */
|
|
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
|
|
|
|
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
|
|
tw32(NVRAM_CFG1, nvcfg1);
|
|
}
|
|
}
|
|
|
|
static void __devinit tg3_get_5755_nvram_info(struct tg3 *tp)
|
|
{
|
|
u32 nvcfg1, protect = 0;
|
|
|
|
nvcfg1 = tr32(NVRAM_CFG1);
|
|
|
|
/* NVRAM protection for TPM */
|
|
if (nvcfg1 & (1 << 27)) {
|
|
tp->tg3_flags2 |= TG3_FLG2_PROTECTED_NVRAM;
|
|
protect = 1;
|
|
}
|
|
|
|
nvcfg1 &= NVRAM_CFG1_5752VENDOR_MASK;
|
|
switch (nvcfg1) {
|
|
case FLASH_5755VENDOR_ATMEL_FLASH_1:
|
|
case FLASH_5755VENDOR_ATMEL_FLASH_2:
|
|
case FLASH_5755VENDOR_ATMEL_FLASH_3:
|
|
case FLASH_5755VENDOR_ATMEL_FLASH_5:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
tp->nvram_pagesize = 264;
|
|
if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1 ||
|
|
nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_5)
|
|
tp->nvram_size = (protect ? 0x3e200 :
|
|
TG3_NVRAM_SIZE_512KB);
|
|
else if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_2)
|
|
tp->nvram_size = (protect ? 0x1f200 :
|
|
TG3_NVRAM_SIZE_256KB);
|
|
else
|
|
tp->nvram_size = (protect ? 0x1f200 :
|
|
TG3_NVRAM_SIZE_128KB);
|
|
break;
|
|
case FLASH_5752VENDOR_ST_M45PE10:
|
|
case FLASH_5752VENDOR_ST_M45PE20:
|
|
case FLASH_5752VENDOR_ST_M45PE40:
|
|
tp->nvram_jedecnum = JEDEC_ST;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
tp->nvram_pagesize = 256;
|
|
if (nvcfg1 == FLASH_5752VENDOR_ST_M45PE10)
|
|
tp->nvram_size = (protect ?
|
|
TG3_NVRAM_SIZE_64KB :
|
|
TG3_NVRAM_SIZE_128KB);
|
|
else if (nvcfg1 == FLASH_5752VENDOR_ST_M45PE20)
|
|
tp->nvram_size = (protect ?
|
|
TG3_NVRAM_SIZE_64KB :
|
|
TG3_NVRAM_SIZE_256KB);
|
|
else
|
|
tp->nvram_size = (protect ?
|
|
TG3_NVRAM_SIZE_128KB :
|
|
TG3_NVRAM_SIZE_512KB);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void __devinit tg3_get_5787_nvram_info(struct tg3 *tp)
|
|
{
|
|
u32 nvcfg1;
|
|
|
|
nvcfg1 = tr32(NVRAM_CFG1);
|
|
|
|
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
|
|
case FLASH_5787VENDOR_ATMEL_EEPROM_64KHZ:
|
|
case FLASH_5787VENDOR_ATMEL_EEPROM_376KHZ:
|
|
case FLASH_5787VENDOR_MICRO_EEPROM_64KHZ:
|
|
case FLASH_5787VENDOR_MICRO_EEPROM_376KHZ:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
|
|
|
|
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
|
|
tw32(NVRAM_CFG1, nvcfg1);
|
|
break;
|
|
case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
|
|
case FLASH_5755VENDOR_ATMEL_FLASH_1:
|
|
case FLASH_5755VENDOR_ATMEL_FLASH_2:
|
|
case FLASH_5755VENDOR_ATMEL_FLASH_3:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
tp->nvram_pagesize = 264;
|
|
break;
|
|
case FLASH_5752VENDOR_ST_M45PE10:
|
|
case FLASH_5752VENDOR_ST_M45PE20:
|
|
case FLASH_5752VENDOR_ST_M45PE40:
|
|
tp->nvram_jedecnum = JEDEC_ST;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
tp->nvram_pagesize = 256;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void __devinit tg3_get_5761_nvram_info(struct tg3 *tp)
|
|
{
|
|
u32 nvcfg1, protect = 0;
|
|
|
|
nvcfg1 = tr32(NVRAM_CFG1);
|
|
|
|
/* NVRAM protection for TPM */
|
|
if (nvcfg1 & (1 << 27)) {
|
|
tp->tg3_flags2 |= TG3_FLG2_PROTECTED_NVRAM;
|
|
protect = 1;
|
|
}
|
|
|
|
nvcfg1 &= NVRAM_CFG1_5752VENDOR_MASK;
|
|
switch (nvcfg1) {
|
|
case FLASH_5761VENDOR_ATMEL_ADB021D:
|
|
case FLASH_5761VENDOR_ATMEL_ADB041D:
|
|
case FLASH_5761VENDOR_ATMEL_ADB081D:
|
|
case FLASH_5761VENDOR_ATMEL_ADB161D:
|
|
case FLASH_5761VENDOR_ATMEL_MDB021D:
|
|
case FLASH_5761VENDOR_ATMEL_MDB041D:
|
|
case FLASH_5761VENDOR_ATMEL_MDB081D:
|
|
case FLASH_5761VENDOR_ATMEL_MDB161D:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
|
|
tp->nvram_pagesize = 256;
|
|
break;
|
|
case FLASH_5761VENDOR_ST_A_M45PE20:
|
|
case FLASH_5761VENDOR_ST_A_M45PE40:
|
|
case FLASH_5761VENDOR_ST_A_M45PE80:
|
|
case FLASH_5761VENDOR_ST_A_M45PE16:
|
|
case FLASH_5761VENDOR_ST_M_M45PE20:
|
|
case FLASH_5761VENDOR_ST_M_M45PE40:
|
|
case FLASH_5761VENDOR_ST_M_M45PE80:
|
|
case FLASH_5761VENDOR_ST_M_M45PE16:
|
|
tp->nvram_jedecnum = JEDEC_ST;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
tp->nvram_pagesize = 256;
|
|
break;
|
|
}
|
|
|
|
if (protect) {
|
|
tp->nvram_size = tr32(NVRAM_ADDR_LOCKOUT);
|
|
} else {
|
|
switch (nvcfg1) {
|
|
case FLASH_5761VENDOR_ATMEL_ADB161D:
|
|
case FLASH_5761VENDOR_ATMEL_MDB161D:
|
|
case FLASH_5761VENDOR_ST_A_M45PE16:
|
|
case FLASH_5761VENDOR_ST_M_M45PE16:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_2MB;
|
|
break;
|
|
case FLASH_5761VENDOR_ATMEL_ADB081D:
|
|
case FLASH_5761VENDOR_ATMEL_MDB081D:
|
|
case FLASH_5761VENDOR_ST_A_M45PE80:
|
|
case FLASH_5761VENDOR_ST_M_M45PE80:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_1MB;
|
|
break;
|
|
case FLASH_5761VENDOR_ATMEL_ADB041D:
|
|
case FLASH_5761VENDOR_ATMEL_MDB041D:
|
|
case FLASH_5761VENDOR_ST_A_M45PE40:
|
|
case FLASH_5761VENDOR_ST_M_M45PE40:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_512KB;
|
|
break;
|
|
case FLASH_5761VENDOR_ATMEL_ADB021D:
|
|
case FLASH_5761VENDOR_ATMEL_MDB021D:
|
|
case FLASH_5761VENDOR_ST_A_M45PE20:
|
|
case FLASH_5761VENDOR_ST_M_M45PE20:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_256KB;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void __devinit tg3_get_5906_nvram_info(struct tg3 *tp)
|
|
{
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
|
|
}
|
|
|
|
static void __devinit tg3_get_57780_nvram_info(struct tg3 *tp)
|
|
{
|
|
u32 nvcfg1;
|
|
|
|
nvcfg1 = tr32(NVRAM_CFG1);
|
|
|
|
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
|
|
case FLASH_5787VENDOR_ATMEL_EEPROM_376KHZ:
|
|
case FLASH_5787VENDOR_MICRO_EEPROM_376KHZ:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE;
|
|
|
|
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
|
|
tw32(NVRAM_CFG1, nvcfg1);
|
|
return;
|
|
case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB011D:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB011B:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB021D:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB021B:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB041D:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB041B:
|
|
tp->nvram_jedecnum = JEDEC_ATMEL;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
|
|
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
|
|
case FLASH_5752VENDOR_ATMEL_FLASH_BUFFERED:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB011D:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB011B:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_128KB;
|
|
break;
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB021D:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB021B:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_256KB;
|
|
break;
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB041D:
|
|
case FLASH_57780VENDOR_ATMEL_AT45DB041B:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_512KB;
|
|
break;
|
|
}
|
|
break;
|
|
case FLASH_5752VENDOR_ST_M45PE10:
|
|
case FLASH_5752VENDOR_ST_M45PE20:
|
|
case FLASH_5752VENDOR_ST_M45PE40:
|
|
tp->nvram_jedecnum = JEDEC_ST;
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
|
|
tp->tg3_flags2 |= TG3_FLG2_FLASH;
|
|
|
|
switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
|
|
case FLASH_5752VENDOR_ST_M45PE10:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_128KB;
|
|
break;
|
|
case FLASH_5752VENDOR_ST_M45PE20:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_256KB;
|
|
break;
|
|
case FLASH_5752VENDOR_ST_M45PE40:
|
|
tp->nvram_size = TG3_NVRAM_SIZE_512KB;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM;
|
|
return;
|
|
}
|
|
|
|
switch (nvcfg1 & NVRAM_CFG1_5752PAGE_SIZE_MASK) {
|
|
case FLASH_5752PAGE_SIZE_256:
|
|
tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
|
|
tp->nvram_pagesize = 256;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_512:
|
|
tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
|
|
tp->nvram_pagesize = 512;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_1K:
|
|
tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
|
|
tp->nvram_pagesize = 1024;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_2K:
|
|
tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
|
|
tp->nvram_pagesize = 2048;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_4K:
|
|
tp->tg3_flags3 |= TG3_FLG3_NO_NVRAM_ADDR_TRANS;
|
|
tp->nvram_pagesize = 4096;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_264:
|
|
tp->nvram_pagesize = 264;
|
|
break;
|
|
case FLASH_5752PAGE_SIZE_528:
|
|
tp->nvram_pagesize = 528;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
|
|
static void __devinit tg3_nvram_init(struct tg3 *tp)
|
|
{
|
|
tw32_f(GRC_EEPROM_ADDR,
|
|
(EEPROM_ADDR_FSM_RESET |
|
|
(EEPROM_DEFAULT_CLOCK_PERIOD <<
|
|
EEPROM_ADDR_CLKPERD_SHIFT)));
|
|
|
|
msleep(1);
|
|
|
|
/* Enable seeprom accesses. */
|
|
tw32_f(GRC_LOCAL_CTRL,
|
|
tr32(GRC_LOCAL_CTRL) | GRC_LCLCTRL_AUTO_SEEPROM);
|
|
udelay(100);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) {
|
|
tp->tg3_flags |= TG3_FLAG_NVRAM;
|
|
|
|
if (tg3_nvram_lock(tp)) {
|
|
printk(KERN_WARNING PFX "%s: Cannot get nvarm lock, "
|
|
"tg3_nvram_init failed.\n", tp->dev->name);
|
|
return;
|
|
}
|
|
tg3_enable_nvram_access(tp);
|
|
|
|
tp->nvram_size = 0;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
|
|
tg3_get_5752_nvram_info(tp);
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
|
|
tg3_get_5755_nvram_info(tp);
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
|
|
tg3_get_5787_nvram_info(tp);
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761)
|
|
tg3_get_5761_nvram_info(tp);
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
|
|
tg3_get_5906_nvram_info(tp);
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
tg3_get_57780_nvram_info(tp);
|
|
else
|
|
tg3_get_nvram_info(tp);
|
|
|
|
if (tp->nvram_size == 0)
|
|
tg3_get_nvram_size(tp);
|
|
|
|
tg3_disable_nvram_access(tp);
|
|
tg3_nvram_unlock(tp);
|
|
|
|
} else {
|
|
tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
|
|
|
|
tg3_get_eeprom_size(tp);
|
|
}
|
|
}
|
|
|
|
static int tg3_nvram_write_block_using_eeprom(struct tg3 *tp,
|
|
u32 offset, u32 len, u8 *buf)
|
|
{
|
|
int i, j, rc = 0;
|
|
u32 val;
|
|
|
|
for (i = 0; i < len; i += 4) {
|
|
u32 addr;
|
|
__be32 data;
|
|
|
|
addr = offset + i;
|
|
|
|
memcpy(&data, buf + i, 4);
|
|
|
|
/*
|
|
* The SEEPROM interface expects the data to always be opposite
|
|
* the native endian format. We accomplish this by reversing
|
|
* all the operations that would have been performed on the
|
|
* data from a call to tg3_nvram_read_be32().
|
|
*/
|
|
tw32(GRC_EEPROM_DATA, swab32(be32_to_cpu(data)));
|
|
|
|
val = tr32(GRC_EEPROM_ADDR);
|
|
tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE);
|
|
|
|
val &= ~(EEPROM_ADDR_ADDR_MASK | EEPROM_ADDR_DEVID_MASK |
|
|
EEPROM_ADDR_READ);
|
|
tw32(GRC_EEPROM_ADDR, val |
|
|
(0 << EEPROM_ADDR_DEVID_SHIFT) |
|
|
(addr & EEPROM_ADDR_ADDR_MASK) |
|
|
EEPROM_ADDR_START |
|
|
EEPROM_ADDR_WRITE);
|
|
|
|
for (j = 0; j < 1000; j++) {
|
|
val = tr32(GRC_EEPROM_ADDR);
|
|
|
|
if (val & EEPROM_ADDR_COMPLETE)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
if (!(val & EEPROM_ADDR_COMPLETE)) {
|
|
rc = -EBUSY;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* offset and length are dword aligned */
|
|
static int tg3_nvram_write_block_unbuffered(struct tg3 *tp, u32 offset, u32 len,
|
|
u8 *buf)
|
|
{
|
|
int ret = 0;
|
|
u32 pagesize = tp->nvram_pagesize;
|
|
u32 pagemask = pagesize - 1;
|
|
u32 nvram_cmd;
|
|
u8 *tmp;
|
|
|
|
tmp = kmalloc(pagesize, GFP_KERNEL);
|
|
if (tmp == NULL)
|
|
return -ENOMEM;
|
|
|
|
while (len) {
|
|
int j;
|
|
u32 phy_addr, page_off, size;
|
|
|
|
phy_addr = offset & ~pagemask;
|
|
|
|
for (j = 0; j < pagesize; j += 4) {
|
|
ret = tg3_nvram_read_be32(tp, phy_addr + j,
|
|
(__be32 *) (tmp + j));
|
|
if (ret)
|
|
break;
|
|
}
|
|
if (ret)
|
|
break;
|
|
|
|
page_off = offset & pagemask;
|
|
size = pagesize;
|
|
if (len < size)
|
|
size = len;
|
|
|
|
len -= size;
|
|
|
|
memcpy(tmp + page_off, buf, size);
|
|
|
|
offset = offset + (pagesize - page_off);
|
|
|
|
tg3_enable_nvram_access(tp);
|
|
|
|
/*
|
|
* Before we can erase the flash page, we need
|
|
* to issue a special "write enable" command.
|
|
*/
|
|
nvram_cmd = NVRAM_CMD_WREN | NVRAM_CMD_GO | NVRAM_CMD_DONE;
|
|
|
|
if (tg3_nvram_exec_cmd(tp, nvram_cmd))
|
|
break;
|
|
|
|
/* Erase the target page */
|
|
tw32(NVRAM_ADDR, phy_addr);
|
|
|
|
nvram_cmd = NVRAM_CMD_GO | NVRAM_CMD_DONE | NVRAM_CMD_WR |
|
|
NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_ERASE;
|
|
|
|
if (tg3_nvram_exec_cmd(tp, nvram_cmd))
|
|
break;
|
|
|
|
/* Issue another write enable to start the write. */
|
|
nvram_cmd = NVRAM_CMD_WREN | NVRAM_CMD_GO | NVRAM_CMD_DONE;
|
|
|
|
if (tg3_nvram_exec_cmd(tp, nvram_cmd))
|
|
break;
|
|
|
|
for (j = 0; j < pagesize; j += 4) {
|
|
__be32 data;
|
|
|
|
data = *((__be32 *) (tmp + j));
|
|
|
|
tw32(NVRAM_WRDATA, be32_to_cpu(data));
|
|
|
|
tw32(NVRAM_ADDR, phy_addr + j);
|
|
|
|
nvram_cmd = NVRAM_CMD_GO | NVRAM_CMD_DONE |
|
|
NVRAM_CMD_WR;
|
|
|
|
if (j == 0)
|
|
nvram_cmd |= NVRAM_CMD_FIRST;
|
|
else if (j == (pagesize - 4))
|
|
nvram_cmd |= NVRAM_CMD_LAST;
|
|
|
|
if ((ret = tg3_nvram_exec_cmd(tp, nvram_cmd)))
|
|
break;
|
|
}
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
nvram_cmd = NVRAM_CMD_WRDI | NVRAM_CMD_GO | NVRAM_CMD_DONE;
|
|
tg3_nvram_exec_cmd(tp, nvram_cmd);
|
|
|
|
kfree(tmp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* offset and length are dword aligned */
|
|
static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len,
|
|
u8 *buf)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
for (i = 0; i < len; i += 4, offset += 4) {
|
|
u32 page_off, phy_addr, nvram_cmd;
|
|
__be32 data;
|
|
|
|
memcpy(&data, buf + i, 4);
|
|
tw32(NVRAM_WRDATA, be32_to_cpu(data));
|
|
|
|
page_off = offset % tp->nvram_pagesize;
|
|
|
|
phy_addr = tg3_nvram_phys_addr(tp, offset);
|
|
|
|
tw32(NVRAM_ADDR, phy_addr);
|
|
|
|
nvram_cmd = NVRAM_CMD_GO | NVRAM_CMD_DONE | NVRAM_CMD_WR;
|
|
|
|
if ((page_off == 0) || (i == 0))
|
|
nvram_cmd |= NVRAM_CMD_FIRST;
|
|
if (page_off == (tp->nvram_pagesize - 4))
|
|
nvram_cmd |= NVRAM_CMD_LAST;
|
|
|
|
if (i == (len - 4))
|
|
nvram_cmd |= NVRAM_CMD_LAST;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752 &&
|
|
!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS) &&
|
|
(tp->nvram_jedecnum == JEDEC_ST) &&
|
|
(nvram_cmd & NVRAM_CMD_FIRST)) {
|
|
|
|
if ((ret = tg3_nvram_exec_cmd(tp,
|
|
NVRAM_CMD_WREN | NVRAM_CMD_GO |
|
|
NVRAM_CMD_DONE)))
|
|
|
|
break;
|
|
}
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_FLASH)) {
|
|
/* We always do complete word writes to eeprom. */
|
|
nvram_cmd |= (NVRAM_CMD_FIRST | NVRAM_CMD_LAST);
|
|
}
|
|
|
|
if ((ret = tg3_nvram_exec_cmd(tp, nvram_cmd)))
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* offset and length are dword aligned */
|
|
static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
|
|
{
|
|
int ret;
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
|
|
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
|
|
~GRC_LCLCTRL_GPIO_OUTPUT1);
|
|
udelay(40);
|
|
}
|
|
|
|
if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) {
|
|
ret = tg3_nvram_write_block_using_eeprom(tp, offset, len, buf);
|
|
}
|
|
else {
|
|
u32 grc_mode;
|
|
|
|
ret = tg3_nvram_lock(tp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tg3_enable_nvram_access(tp);
|
|
if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PROTECTED_NVRAM))
|
|
tw32(NVRAM_WRITE1, 0x406);
|
|
|
|
grc_mode = tr32(GRC_MODE);
|
|
tw32(GRC_MODE, grc_mode | GRC_MODE_NVRAM_WR_ENABLE);
|
|
|
|
if ((tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED) ||
|
|
!(tp->tg3_flags2 & TG3_FLG2_FLASH)) {
|
|
|
|
ret = tg3_nvram_write_block_buffered(tp, offset, len,
|
|
buf);
|
|
}
|
|
else {
|
|
ret = tg3_nvram_write_block_unbuffered(tp, offset, len,
|
|
buf);
|
|
}
|
|
|
|
grc_mode = tr32(GRC_MODE);
|
|
tw32(GRC_MODE, grc_mode & ~GRC_MODE_NVRAM_WR_ENABLE);
|
|
|
|
tg3_disable_nvram_access(tp);
|
|
tg3_nvram_unlock(tp);
|
|
}
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
|
|
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
|
|
udelay(40);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
struct subsys_tbl_ent {
|
|
u16 subsys_vendor, subsys_devid;
|
|
u32 phy_id;
|
|
};
|
|
|
|
static struct subsys_tbl_ent subsys_id_to_phy_id[] = {
|
|
/* Broadcom boards. */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x1644, PHY_ID_BCM5401 }, /* BCM95700A6 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x0001, PHY_ID_BCM5701 }, /* BCM95701A5 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x0002, PHY_ID_BCM8002 }, /* BCM95700T6 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x0003, 0 }, /* BCM95700A9 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x0005, PHY_ID_BCM5701 }, /* BCM95701T1 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x0006, PHY_ID_BCM5701 }, /* BCM95701T8 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x0007, 0 }, /* BCM95701A7 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x0008, PHY_ID_BCM5701 }, /* BCM95701A10 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x8008, PHY_ID_BCM5701 }, /* BCM95701A12 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x0009, PHY_ID_BCM5703 }, /* BCM95703Ax1 */
|
|
{ PCI_VENDOR_ID_BROADCOM, 0x8009, PHY_ID_BCM5703 }, /* BCM95703Ax2 */
|
|
|
|
/* 3com boards. */
|
|
{ PCI_VENDOR_ID_3COM, 0x1000, PHY_ID_BCM5401 }, /* 3C996T */
|
|
{ PCI_VENDOR_ID_3COM, 0x1006, PHY_ID_BCM5701 }, /* 3C996BT */
|
|
{ PCI_VENDOR_ID_3COM, 0x1004, 0 }, /* 3C996SX */
|
|
{ PCI_VENDOR_ID_3COM, 0x1007, PHY_ID_BCM5701 }, /* 3C1000T */
|
|
{ PCI_VENDOR_ID_3COM, 0x1008, PHY_ID_BCM5701 }, /* 3C940BR01 */
|
|
|
|
/* DELL boards. */
|
|
{ PCI_VENDOR_ID_DELL, 0x00d1, PHY_ID_BCM5401 }, /* VIPER */
|
|
{ PCI_VENDOR_ID_DELL, 0x0106, PHY_ID_BCM5401 }, /* JAGUAR */
|
|
{ PCI_VENDOR_ID_DELL, 0x0109, PHY_ID_BCM5411 }, /* MERLOT */
|
|
{ PCI_VENDOR_ID_DELL, 0x010a, PHY_ID_BCM5411 }, /* SLIM_MERLOT */
|
|
|
|
/* Compaq boards. */
|
|
{ PCI_VENDOR_ID_COMPAQ, 0x007c, PHY_ID_BCM5701 }, /* BANSHEE */
|
|
{ PCI_VENDOR_ID_COMPAQ, 0x009a, PHY_ID_BCM5701 }, /* BANSHEE_2 */
|
|
{ PCI_VENDOR_ID_COMPAQ, 0x007d, 0 }, /* CHANGELING */
|
|
{ PCI_VENDOR_ID_COMPAQ, 0x0085, PHY_ID_BCM5701 }, /* NC7780 */
|
|
{ PCI_VENDOR_ID_COMPAQ, 0x0099, PHY_ID_BCM5701 }, /* NC7780_2 */
|
|
|
|
/* IBM boards. */
|
|
{ PCI_VENDOR_ID_IBM, 0x0281, 0 } /* IBM??? */
|
|
};
|
|
|
|
static inline struct subsys_tbl_ent *lookup_by_subsys(struct tg3 *tp)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(subsys_id_to_phy_id); i++) {
|
|
if ((subsys_id_to_phy_id[i].subsys_vendor ==
|
|
tp->pdev->subsystem_vendor) &&
|
|
(subsys_id_to_phy_id[i].subsys_devid ==
|
|
tp->pdev->subsystem_device))
|
|
return &subsys_id_to_phy_id[i];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
|
|
{
|
|
u32 val;
|
|
u16 pmcsr;
|
|
|
|
/* On some early chips the SRAM cannot be accessed in D3hot state,
|
|
* so need make sure we're in D0.
|
|
*/
|
|
pci_read_config_word(tp->pdev, tp->pm_cap + PCI_PM_CTRL, &pmcsr);
|
|
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
|
|
pci_write_config_word(tp->pdev, tp->pm_cap + PCI_PM_CTRL, pmcsr);
|
|
msleep(1);
|
|
|
|
/* Make sure register accesses (indirect or otherwise)
|
|
* will function correctly.
|
|
*/
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
|
|
tp->misc_host_ctrl);
|
|
|
|
/* The memory arbiter has to be enabled in order for SRAM accesses
|
|
* to succeed. Normally on powerup the tg3 chip firmware will make
|
|
* sure it is enabled, but other entities such as system netboot
|
|
* code might disable it.
|
|
*/
|
|
val = tr32(MEMARB_MODE);
|
|
tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
|
|
|
|
tp->phy_id = PHY_ID_INVALID;
|
|
tp->led_ctrl = LED_CTRL_MODE_PHY_1;
|
|
|
|
/* Assume an onboard device and WOL capable by default. */
|
|
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT | TG3_FLAG_WOL_CAP;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM)) {
|
|
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
|
|
tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
|
|
}
|
|
val = tr32(VCPU_CFGSHDW);
|
|
if (val & VCPU_CFGSHDW_ASPM_DBNC)
|
|
tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
|
|
if ((val & VCPU_CFGSHDW_WOL_ENABLE) &&
|
|
(val & VCPU_CFGSHDW_WOL_MAGPKT))
|
|
tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
|
|
goto done;
|
|
}
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
|
|
if (val == NIC_SRAM_DATA_SIG_MAGIC) {
|
|
u32 nic_cfg, led_cfg;
|
|
u32 nic_phy_id, ver, cfg2 = 0, cfg4 = 0, eeprom_phy_id;
|
|
int eeprom_phy_serdes = 0;
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
|
|
tp->nic_sram_data_cfg = nic_cfg;
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_VER, &ver);
|
|
ver >>= NIC_SRAM_DATA_VER_SHIFT;
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) &&
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) &&
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5703) &&
|
|
(ver > 0) && (ver < 0x100))
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_2, &cfg2);
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_4, &cfg4);
|
|
|
|
if ((nic_cfg & NIC_SRAM_DATA_CFG_PHY_TYPE_MASK) ==
|
|
NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER)
|
|
eeprom_phy_serdes = 1;
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_PHY_ID, &nic_phy_id);
|
|
if (nic_phy_id != 0) {
|
|
u32 id1 = nic_phy_id & NIC_SRAM_DATA_PHY_ID1_MASK;
|
|
u32 id2 = nic_phy_id & NIC_SRAM_DATA_PHY_ID2_MASK;
|
|
|
|
eeprom_phy_id = (id1 >> 16) << 10;
|
|
eeprom_phy_id |= (id2 & 0xfc00) << 16;
|
|
eeprom_phy_id |= (id2 & 0x03ff) << 0;
|
|
} else
|
|
eeprom_phy_id = 0;
|
|
|
|
tp->phy_id = eeprom_phy_id;
|
|
if (eeprom_phy_serdes) {
|
|
if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
|
|
tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
|
|
else
|
|
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
|
|
led_cfg = cfg2 & (NIC_SRAM_DATA_CFG_LED_MODE_MASK |
|
|
SHASTA_EXT_LED_MODE_MASK);
|
|
else
|
|
led_cfg = nic_cfg & NIC_SRAM_DATA_CFG_LED_MODE_MASK;
|
|
|
|
switch (led_cfg) {
|
|
default:
|
|
case NIC_SRAM_DATA_CFG_LED_MODE_PHY_1:
|
|
tp->led_ctrl = LED_CTRL_MODE_PHY_1;
|
|
break;
|
|
|
|
case NIC_SRAM_DATA_CFG_LED_MODE_PHY_2:
|
|
tp->led_ctrl = LED_CTRL_MODE_PHY_2;
|
|
break;
|
|
|
|
case NIC_SRAM_DATA_CFG_LED_MODE_MAC:
|
|
tp->led_ctrl = LED_CTRL_MODE_MAC;
|
|
|
|
/* Default to PHY_1_MODE if 0 (MAC_MODE) is
|
|
* read on some older 5700/5701 bootcode.
|
|
*/
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
|
|
ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) ==
|
|
ASIC_REV_5701)
|
|
tp->led_ctrl = LED_CTRL_MODE_PHY_1;
|
|
|
|
break;
|
|
|
|
case SHASTA_EXT_LED_SHARED:
|
|
tp->led_ctrl = LED_CTRL_MODE_SHARED;
|
|
if (tp->pci_chip_rev_id != CHIPREV_ID_5750_A0 &&
|
|
tp->pci_chip_rev_id != CHIPREV_ID_5750_A1)
|
|
tp->led_ctrl |= (LED_CTRL_MODE_PHY_1 |
|
|
LED_CTRL_MODE_PHY_2);
|
|
break;
|
|
|
|
case SHASTA_EXT_LED_MAC:
|
|
tp->led_ctrl = LED_CTRL_MODE_SHASTA_MAC;
|
|
break;
|
|
|
|
case SHASTA_EXT_LED_COMBO:
|
|
tp->led_ctrl = LED_CTRL_MODE_COMBO;
|
|
if (tp->pci_chip_rev_id != CHIPREV_ID_5750_A0)
|
|
tp->led_ctrl |= (LED_CTRL_MODE_PHY_1 |
|
|
LED_CTRL_MODE_PHY_2);
|
|
break;
|
|
|
|
}
|
|
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) &&
|
|
tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)
|
|
tp->led_ctrl = LED_CTRL_MODE_PHY_2;
|
|
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX)
|
|
tp->led_ctrl = LED_CTRL_MODE_PHY_1;
|
|
|
|
if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
|
|
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
|
|
if ((tp->pdev->subsystem_vendor ==
|
|
PCI_VENDOR_ID_ARIMA) &&
|
|
(tp->pdev->subsystem_device == 0x205a ||
|
|
tp->pdev->subsystem_device == 0x2063))
|
|
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
|
|
} else {
|
|
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
|
|
tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
|
|
}
|
|
|
|
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
|
|
tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
|
|
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
|
|
tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
|
|
}
|
|
|
|
if ((nic_cfg & NIC_SRAM_DATA_CFG_APE_ENABLE) &&
|
|
(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
|
|
tp->tg3_flags3 |= TG3_FLG3_ENABLE_APE;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES &&
|
|
!(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL))
|
|
tp->tg3_flags &= ~TG3_FLAG_WOL_CAP;
|
|
|
|
if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) &&
|
|
(nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE))
|
|
tp->tg3_flags |= TG3_FLAG_WOL_ENABLE;
|
|
|
|
if (cfg2 & (1 << 17))
|
|
tp->tg3_flags2 |= TG3_FLG2_CAPACITIVE_COUPLING;
|
|
|
|
/* serdes signal pre-emphasis in register 0x590 set by */
|
|
/* bootcode if bit 18 is set */
|
|
if (cfg2 & (1 << 18))
|
|
tp->tg3_flags2 |= TG3_FLG2_SERDES_PREEMPHASIS;
|
|
|
|
if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX)) &&
|
|
(cfg2 & NIC_SRAM_DATA_CFG_2_APD_EN))
|
|
tp->tg3_flags3 |= TG3_FLG3_PHY_ENABLE_APD;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
|
|
u32 cfg3;
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_3, &cfg3);
|
|
if (cfg3 & NIC_SRAM_ASPM_DEBOUNCE)
|
|
tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND;
|
|
}
|
|
|
|
if (cfg4 & NIC_SRAM_RGMII_STD_IBND_DISABLE)
|
|
tp->tg3_flags3 |= TG3_FLG3_RGMII_STD_IBND_DISABLE;
|
|
if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_RX_EN)
|
|
tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_RX_EN;
|
|
if (cfg4 & NIC_SRAM_RGMII_EXT_IBND_TX_EN)
|
|
tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_TX_EN;
|
|
}
|
|
done:
|
|
device_init_wakeup(&tp->pdev->dev, tp->tg3_flags & TG3_FLAG_WOL_CAP);
|
|
device_set_wakeup_enable(&tp->pdev->dev,
|
|
tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
|
|
}
|
|
|
|
static int __devinit tg3_issue_otp_command(struct tg3 *tp, u32 cmd)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
tw32(OTP_CTRL, cmd | OTP_CTRL_OTP_CMD_START);
|
|
tw32(OTP_CTRL, cmd);
|
|
|
|
/* Wait for up to 1 ms for command to execute. */
|
|
for (i = 0; i < 100; i++) {
|
|
val = tr32(OTP_STATUS);
|
|
if (val & OTP_STATUS_CMD_DONE)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
return (val & OTP_STATUS_CMD_DONE) ? 0 : -EBUSY;
|
|
}
|
|
|
|
/* Read the gphy configuration from the OTP region of the chip. The gphy
|
|
* configuration is a 32-bit value that straddles the alignment boundary.
|
|
* We do two 32-bit reads and then shift and merge the results.
|
|
*/
|
|
static u32 __devinit tg3_read_otp_phycfg(struct tg3 *tp)
|
|
{
|
|
u32 bhalf_otp, thalf_otp;
|
|
|
|
tw32(OTP_MODE, OTP_MODE_OTP_THRU_GRC);
|
|
|
|
if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_INIT))
|
|
return 0;
|
|
|
|
tw32(OTP_ADDRESS, OTP_ADDRESS_MAGIC1);
|
|
|
|
if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_READ))
|
|
return 0;
|
|
|
|
thalf_otp = tr32(OTP_READ_DATA);
|
|
|
|
tw32(OTP_ADDRESS, OTP_ADDRESS_MAGIC2);
|
|
|
|
if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_READ))
|
|
return 0;
|
|
|
|
bhalf_otp = tr32(OTP_READ_DATA);
|
|
|
|
return ((thalf_otp & 0x0000ffff) << 16) | (bhalf_otp >> 16);
|
|
}
|
|
|
|
static int __devinit tg3_phy_probe(struct tg3 *tp)
|
|
{
|
|
u32 hw_phy_id_1, hw_phy_id_2;
|
|
u32 hw_phy_id, hw_phy_id_masked;
|
|
int err;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
|
|
return tg3_phy_init(tp);
|
|
|
|
/* Reading the PHY ID register can conflict with ASF
|
|
* firmware access to the PHY hardware.
|
|
*/
|
|
err = 0;
|
|
if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
|
|
(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
|
|
hw_phy_id = hw_phy_id_masked = PHY_ID_INVALID;
|
|
} else {
|
|
/* Now read the physical PHY_ID from the chip and verify
|
|
* that it is sane. If it doesn't look good, we fall back
|
|
* to either the hard-coded table based PHY_ID and failing
|
|
* that the value found in the eeprom area.
|
|
*/
|
|
err |= tg3_readphy(tp, MII_PHYSID1, &hw_phy_id_1);
|
|
err |= tg3_readphy(tp, MII_PHYSID2, &hw_phy_id_2);
|
|
|
|
hw_phy_id = (hw_phy_id_1 & 0xffff) << 10;
|
|
hw_phy_id |= (hw_phy_id_2 & 0xfc00) << 16;
|
|
hw_phy_id |= (hw_phy_id_2 & 0x03ff) << 0;
|
|
|
|
hw_phy_id_masked = hw_phy_id & PHY_ID_MASK;
|
|
}
|
|
|
|
if (!err && KNOWN_PHY_ID(hw_phy_id_masked)) {
|
|
tp->phy_id = hw_phy_id;
|
|
if (hw_phy_id_masked == PHY_ID_BCM8002)
|
|
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
|
|
else
|
|
tp->tg3_flags2 &= ~TG3_FLG2_PHY_SERDES;
|
|
} else {
|
|
if (tp->phy_id != PHY_ID_INVALID) {
|
|
/* Do nothing, phy ID already set up in
|
|
* tg3_get_eeprom_hw_cfg().
|
|
*/
|
|
} else {
|
|
struct subsys_tbl_ent *p;
|
|
|
|
/* No eeprom signature? Try the hardcoded
|
|
* subsys device table.
|
|
*/
|
|
p = lookup_by_subsys(tp);
|
|
if (!p)
|
|
return -ENODEV;
|
|
|
|
tp->phy_id = p->phy_id;
|
|
if (!tp->phy_id ||
|
|
tp->phy_id == PHY_ID_BCM8002)
|
|
tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
|
|
}
|
|
}
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) &&
|
|
!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) &&
|
|
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
|
|
u32 bmsr, adv_reg, tg3_ctrl, mask;
|
|
|
|
tg3_readphy(tp, MII_BMSR, &bmsr);
|
|
if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
|
|
(bmsr & BMSR_LSTATUS))
|
|
goto skip_phy_reset;
|
|
|
|
err = tg3_phy_reset(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
adv_reg = (ADVERTISE_10HALF | ADVERTISE_10FULL |
|
|
ADVERTISE_100HALF | ADVERTISE_100FULL |
|
|
ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
|
|
tg3_ctrl = 0;
|
|
if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY)) {
|
|
tg3_ctrl = (MII_TG3_CTRL_ADV_1000_HALF |
|
|
MII_TG3_CTRL_ADV_1000_FULL);
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)
|
|
tg3_ctrl |= (MII_TG3_CTRL_AS_MASTER |
|
|
MII_TG3_CTRL_ENABLE_AS_MASTER);
|
|
}
|
|
|
|
mask = (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
|
|
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
|
|
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full);
|
|
if (!tg3_copper_is_advertising_all(tp, mask)) {
|
|
tg3_writephy(tp, MII_ADVERTISE, adv_reg);
|
|
|
|
if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY))
|
|
tg3_writephy(tp, MII_TG3_CTRL, tg3_ctrl);
|
|
|
|
tg3_writephy(tp, MII_BMCR,
|
|
BMCR_ANENABLE | BMCR_ANRESTART);
|
|
}
|
|
tg3_phy_set_wirespeed(tp);
|
|
|
|
tg3_writephy(tp, MII_ADVERTISE, adv_reg);
|
|
if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY))
|
|
tg3_writephy(tp, MII_TG3_CTRL, tg3_ctrl);
|
|
}
|
|
|
|
skip_phy_reset:
|
|
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
|
|
err = tg3_init_5401phy_dsp(tp);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (!err && ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)) {
|
|
err = tg3_init_5401phy_dsp(tp);
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)
|
|
tp->link_config.advertising =
|
|
(ADVERTISED_1000baseT_Half |
|
|
ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_Autoneg |
|
|
ADVERTISED_FIBRE);
|
|
if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
|
|
tp->link_config.advertising &=
|
|
~(ADVERTISED_1000baseT_Half |
|
|
ADVERTISED_1000baseT_Full);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void __devinit tg3_read_partno(struct tg3 *tp)
|
|
{
|
|
unsigned char vpd_data[256]; /* in little-endian format */
|
|
unsigned int i;
|
|
u32 magic;
|
|
|
|
if ((tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) ||
|
|
tg3_nvram_read(tp, 0x0, &magic))
|
|
goto out_not_found;
|
|
|
|
if (magic == TG3_EEPROM_MAGIC) {
|
|
for (i = 0; i < 256; i += 4) {
|
|
u32 tmp;
|
|
|
|
/* The data is in little-endian format in NVRAM.
|
|
* Use the big-endian read routines to preserve
|
|
* the byte order as it exists in NVRAM.
|
|
*/
|
|
if (tg3_nvram_read_be32(tp, 0x100 + i, &tmp))
|
|
goto out_not_found;
|
|
|
|
memcpy(&vpd_data[i], &tmp, sizeof(tmp));
|
|
}
|
|
} else {
|
|
int vpd_cap;
|
|
|
|
vpd_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_VPD);
|
|
for (i = 0; i < 256; i += 4) {
|
|
u32 tmp, j = 0;
|
|
__le32 v;
|
|
u16 tmp16;
|
|
|
|
pci_write_config_word(tp->pdev, vpd_cap + PCI_VPD_ADDR,
|
|
i);
|
|
while (j++ < 100) {
|
|
pci_read_config_word(tp->pdev, vpd_cap +
|
|
PCI_VPD_ADDR, &tmp16);
|
|
if (tmp16 & 0x8000)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
if (!(tmp16 & 0x8000))
|
|
goto out_not_found;
|
|
|
|
pci_read_config_dword(tp->pdev, vpd_cap + PCI_VPD_DATA,
|
|
&tmp);
|
|
v = cpu_to_le32(tmp);
|
|
memcpy(&vpd_data[i], &v, sizeof(v));
|
|
}
|
|
}
|
|
|
|
/* Now parse and find the part number. */
|
|
for (i = 0; i < 254; ) {
|
|
unsigned char val = vpd_data[i];
|
|
unsigned int block_end;
|
|
|
|
if (val == 0x82 || val == 0x91) {
|
|
i = (i + 3 +
|
|
(vpd_data[i + 1] +
|
|
(vpd_data[i + 2] << 8)));
|
|
continue;
|
|
}
|
|
|
|
if (val != 0x90)
|
|
goto out_not_found;
|
|
|
|
block_end = (i + 3 +
|
|
(vpd_data[i + 1] +
|
|
(vpd_data[i + 2] << 8)));
|
|
i += 3;
|
|
|
|
if (block_end > 256)
|
|
goto out_not_found;
|
|
|
|
while (i < (block_end - 2)) {
|
|
if (vpd_data[i + 0] == 'P' &&
|
|
vpd_data[i + 1] == 'N') {
|
|
int partno_len = vpd_data[i + 2];
|
|
|
|
i += 3;
|
|
if (partno_len > 24 || (partno_len + i) > 256)
|
|
goto out_not_found;
|
|
|
|
memcpy(tp->board_part_number,
|
|
&vpd_data[i], partno_len);
|
|
|
|
/* Success. */
|
|
return;
|
|
}
|
|
i += 3 + vpd_data[i + 2];
|
|
}
|
|
|
|
/* Part number not found. */
|
|
goto out_not_found;
|
|
}
|
|
|
|
out_not_found:
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
|
|
strcpy(tp->board_part_number, "BCM95906");
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
|
|
tp->pdev->device == TG3PCI_DEVICE_TIGON3_57780)
|
|
strcpy(tp->board_part_number, "BCM57780");
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
|
|
tp->pdev->device == TG3PCI_DEVICE_TIGON3_57760)
|
|
strcpy(tp->board_part_number, "BCM57760");
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
|
|
tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790)
|
|
strcpy(tp->board_part_number, "BCM57790");
|
|
else
|
|
strcpy(tp->board_part_number, "none");
|
|
}
|
|
|
|
static int __devinit tg3_fw_img_is_valid(struct tg3 *tp, u32 offset)
|
|
{
|
|
u32 val;
|
|
|
|
if (tg3_nvram_read(tp, offset, &val) ||
|
|
(val & 0xfc000000) != 0x0c000000 ||
|
|
tg3_nvram_read(tp, offset + 4, &val) ||
|
|
val != 0)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void __devinit tg3_read_bc_ver(struct tg3 *tp)
|
|
{
|
|
u32 val, offset, start, ver_offset;
|
|
int i;
|
|
bool newver = false;
|
|
|
|
if (tg3_nvram_read(tp, 0xc, &offset) ||
|
|
tg3_nvram_read(tp, 0x4, &start))
|
|
return;
|
|
|
|
offset = tg3_nvram_logical_addr(tp, offset);
|
|
|
|
if (tg3_nvram_read(tp, offset, &val))
|
|
return;
|
|
|
|
if ((val & 0xfc000000) == 0x0c000000) {
|
|
if (tg3_nvram_read(tp, offset + 4, &val))
|
|
return;
|
|
|
|
if (val == 0)
|
|
newver = true;
|
|
}
|
|
|
|
if (newver) {
|
|
if (tg3_nvram_read(tp, offset + 8, &ver_offset))
|
|
return;
|
|
|
|
offset = offset + ver_offset - start;
|
|
for (i = 0; i < 16; i += 4) {
|
|
__be32 v;
|
|
if (tg3_nvram_read_be32(tp, offset + i, &v))
|
|
return;
|
|
|
|
memcpy(tp->fw_ver + i, &v, sizeof(v));
|
|
}
|
|
} else {
|
|
u32 major, minor;
|
|
|
|
if (tg3_nvram_read(tp, TG3_NVM_PTREV_BCVER, &ver_offset))
|
|
return;
|
|
|
|
major = (ver_offset & TG3_NVM_BCVER_MAJMSK) >>
|
|
TG3_NVM_BCVER_MAJSFT;
|
|
minor = ver_offset & TG3_NVM_BCVER_MINMSK;
|
|
snprintf(&tp->fw_ver[0], 32, "v%d.%02d", major, minor);
|
|
}
|
|
}
|
|
|
|
static void __devinit tg3_read_hwsb_ver(struct tg3 *tp)
|
|
{
|
|
u32 val, major, minor;
|
|
|
|
/* Use native endian representation */
|
|
if (tg3_nvram_read(tp, TG3_NVM_HWSB_CFG1, &val))
|
|
return;
|
|
|
|
major = (val & TG3_NVM_HWSB_CFG1_MAJMSK) >>
|
|
TG3_NVM_HWSB_CFG1_MAJSFT;
|
|
minor = (val & TG3_NVM_HWSB_CFG1_MINMSK) >>
|
|
TG3_NVM_HWSB_CFG1_MINSFT;
|
|
|
|
snprintf(&tp->fw_ver[0], 32, "sb v%d.%02d", major, minor);
|
|
}
|
|
|
|
static void __devinit tg3_read_sb_ver(struct tg3 *tp, u32 val)
|
|
{
|
|
u32 offset, major, minor, build;
|
|
|
|
tp->fw_ver[0] = 's';
|
|
tp->fw_ver[1] = 'b';
|
|
tp->fw_ver[2] = '\0';
|
|
|
|
if ((val & TG3_EEPROM_SB_FORMAT_MASK) != TG3_EEPROM_SB_FORMAT_1)
|
|
return;
|
|
|
|
switch (val & TG3_EEPROM_SB_REVISION_MASK) {
|
|
case TG3_EEPROM_SB_REVISION_0:
|
|
offset = TG3_EEPROM_SB_F1R0_EDH_OFF;
|
|
break;
|
|
case TG3_EEPROM_SB_REVISION_2:
|
|
offset = TG3_EEPROM_SB_F1R2_EDH_OFF;
|
|
break;
|
|
case TG3_EEPROM_SB_REVISION_3:
|
|
offset = TG3_EEPROM_SB_F1R3_EDH_OFF;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
if (tg3_nvram_read(tp, offset, &val))
|
|
return;
|
|
|
|
build = (val & TG3_EEPROM_SB_EDH_BLD_MASK) >>
|
|
TG3_EEPROM_SB_EDH_BLD_SHFT;
|
|
major = (val & TG3_EEPROM_SB_EDH_MAJ_MASK) >>
|
|
TG3_EEPROM_SB_EDH_MAJ_SHFT;
|
|
minor = val & TG3_EEPROM_SB_EDH_MIN_MASK;
|
|
|
|
if (minor > 99 || build > 26)
|
|
return;
|
|
|
|
snprintf(&tp->fw_ver[2], 30, " v%d.%02d", major, minor);
|
|
|
|
if (build > 0) {
|
|
tp->fw_ver[8] = 'a' + build - 1;
|
|
tp->fw_ver[9] = '\0';
|
|
}
|
|
}
|
|
|
|
static void __devinit tg3_read_mgmtfw_ver(struct tg3 *tp)
|
|
{
|
|
u32 val, offset, start;
|
|
int i, vlen;
|
|
|
|
for (offset = TG3_NVM_DIR_START;
|
|
offset < TG3_NVM_DIR_END;
|
|
offset += TG3_NVM_DIRENT_SIZE) {
|
|
if (tg3_nvram_read(tp, offset, &val))
|
|
return;
|
|
|
|
if ((val >> TG3_NVM_DIRTYPE_SHIFT) == TG3_NVM_DIRTYPE_ASFINI)
|
|
break;
|
|
}
|
|
|
|
if (offset == TG3_NVM_DIR_END)
|
|
return;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
|
|
start = 0x08000000;
|
|
else if (tg3_nvram_read(tp, offset - 4, &start))
|
|
return;
|
|
|
|
if (tg3_nvram_read(tp, offset + 4, &offset) ||
|
|
!tg3_fw_img_is_valid(tp, offset) ||
|
|
tg3_nvram_read(tp, offset + 8, &val))
|
|
return;
|
|
|
|
offset += val - start;
|
|
|
|
vlen = strlen(tp->fw_ver);
|
|
|
|
tp->fw_ver[vlen++] = ',';
|
|
tp->fw_ver[vlen++] = ' ';
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
__be32 v;
|
|
if (tg3_nvram_read_be32(tp, offset, &v))
|
|
return;
|
|
|
|
offset += sizeof(v);
|
|
|
|
if (vlen > TG3_VER_SIZE - sizeof(v)) {
|
|
memcpy(&tp->fw_ver[vlen], &v, TG3_VER_SIZE - vlen);
|
|
break;
|
|
}
|
|
|
|
memcpy(&tp->fw_ver[vlen], &v, sizeof(v));
|
|
vlen += sizeof(v);
|
|
}
|
|
}
|
|
|
|
static void __devinit tg3_read_dash_ver(struct tg3 *tp)
|
|
{
|
|
int vlen;
|
|
u32 apedata;
|
|
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) ||
|
|
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
|
|
return;
|
|
|
|
apedata = tg3_ape_read32(tp, TG3_APE_SEG_SIG);
|
|
if (apedata != APE_SEG_SIG_MAGIC)
|
|
return;
|
|
|
|
apedata = tg3_ape_read32(tp, TG3_APE_FW_STATUS);
|
|
if (!(apedata & APE_FW_STATUS_READY))
|
|
return;
|
|
|
|
apedata = tg3_ape_read32(tp, TG3_APE_FW_VERSION);
|
|
|
|
vlen = strlen(tp->fw_ver);
|
|
|
|
snprintf(&tp->fw_ver[vlen], TG3_VER_SIZE - vlen, " DASH v%d.%d.%d.%d",
|
|
(apedata & APE_FW_VERSION_MAJMSK) >> APE_FW_VERSION_MAJSFT,
|
|
(apedata & APE_FW_VERSION_MINMSK) >> APE_FW_VERSION_MINSFT,
|
|
(apedata & APE_FW_VERSION_REVMSK) >> APE_FW_VERSION_REVSFT,
|
|
(apedata & APE_FW_VERSION_BLDMSK));
|
|
}
|
|
|
|
static void __devinit tg3_read_fw_ver(struct tg3 *tp)
|
|
{
|
|
u32 val;
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) {
|
|
tp->fw_ver[0] = 's';
|
|
tp->fw_ver[1] = 'b';
|
|
tp->fw_ver[2] = '\0';
|
|
|
|
return;
|
|
}
|
|
|
|
if (tg3_nvram_read(tp, 0, &val))
|
|
return;
|
|
|
|
if (val == TG3_EEPROM_MAGIC)
|
|
tg3_read_bc_ver(tp);
|
|
else if ((val & TG3_EEPROM_MAGIC_FW_MSK) == TG3_EEPROM_MAGIC_FW)
|
|
tg3_read_sb_ver(tp, val);
|
|
else if ((val & TG3_EEPROM_MAGIC_HW_MSK) == TG3_EEPROM_MAGIC_HW)
|
|
tg3_read_hwsb_ver(tp);
|
|
else
|
|
return;
|
|
|
|
if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) ||
|
|
(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE))
|
|
return;
|
|
|
|
tg3_read_mgmtfw_ver(tp);
|
|
|
|
tp->fw_ver[TG3_VER_SIZE - 1] = 0;
|
|
}
|
|
|
|
static struct pci_dev * __devinit tg3_find_peer(struct tg3 *);
|
|
|
|
static int __devinit tg3_get_invariants(struct tg3 *tp)
|
|
{
|
|
static struct pci_device_id write_reorder_chipsets[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
|
|
PCI_DEVICE_ID_AMD_FE_GATE_700C) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
|
|
PCI_DEVICE_ID_AMD_8131_BRIDGE) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA,
|
|
PCI_DEVICE_ID_VIA_8385_0) },
|
|
{ },
|
|
};
|
|
u32 misc_ctrl_reg;
|
|
u32 pci_state_reg, grc_misc_cfg;
|
|
u32 val;
|
|
u16 pci_cmd;
|
|
int err;
|
|
|
|
/* Force memory write invalidate off. If we leave it on,
|
|
* then on 5700_BX chips we have to enable a workaround.
|
|
* The workaround is to set the TG3PCI_DMA_RW_CTRL boundary
|
|
* to match the cacheline size. The Broadcom driver have this
|
|
* workaround but turns MWI off all the times so never uses
|
|
* it. This seems to suggest that the workaround is insufficient.
|
|
*/
|
|
pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd);
|
|
pci_cmd &= ~PCI_COMMAND_INVALIDATE;
|
|
pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd);
|
|
|
|
/* It is absolutely critical that TG3PCI_MISC_HOST_CTRL
|
|
* has the register indirect write enable bit set before
|
|
* we try to access any of the MMIO registers. It is also
|
|
* critical that the PCI-X hw workaround situation is decided
|
|
* before that as well.
|
|
*/
|
|
pci_read_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
|
|
&misc_ctrl_reg);
|
|
|
|
tp->pci_chip_rev_id = (misc_ctrl_reg >>
|
|
MISC_HOST_CTRL_CHIPREV_SHIFT);
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_USE_PROD_ID_REG) {
|
|
u32 prod_id_asic_rev;
|
|
|
|
pci_read_config_dword(tp->pdev, TG3PCI_PRODID_ASICREV,
|
|
&prod_id_asic_rev);
|
|
tp->pci_chip_rev_id = prod_id_asic_rev;
|
|
}
|
|
|
|
/* Wrong chip ID in 5752 A0. This code can be removed later
|
|
* as A0 is not in production.
|
|
*/
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5752_A0_HW)
|
|
tp->pci_chip_rev_id = CHIPREV_ID_5752_A0;
|
|
|
|
/* If we have 5702/03 A1 or A2 on certain ICH chipsets,
|
|
* we need to disable memory and use config. cycles
|
|
* only to access all registers. The 5702/03 chips
|
|
* can mistakenly decode the special cycles from the
|
|
* ICH chipsets as memory write cycles, causing corruption
|
|
* of register and memory space. Only certain ICH bridges
|
|
* will drive special cycles with non-zero data during the
|
|
* address phase which can fall within the 5703's address
|
|
* range. This is not an ICH bug as the PCI spec allows
|
|
* non-zero address during special cycles. However, only
|
|
* these ICH bridges are known to drive non-zero addresses
|
|
* during special cycles.
|
|
*
|
|
* Since special cycles do not cross PCI bridges, we only
|
|
* enable this workaround if the 5703 is on the secondary
|
|
* bus of these ICH bridges.
|
|
*/
|
|
if ((tp->pci_chip_rev_id == CHIPREV_ID_5703_A1) ||
|
|
(tp->pci_chip_rev_id == CHIPREV_ID_5703_A2)) {
|
|
static struct tg3_dev_id {
|
|
u32 vendor;
|
|
u32 device;
|
|
u32 rev;
|
|
} ich_chipsets[] = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_8,
|
|
PCI_ANY_ID },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_8,
|
|
PCI_ANY_ID },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_11,
|
|
0xa },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_6,
|
|
PCI_ANY_ID },
|
|
{ },
|
|
};
|
|
struct tg3_dev_id *pci_id = &ich_chipsets[0];
|
|
struct pci_dev *bridge = NULL;
|
|
|
|
while (pci_id->vendor != 0) {
|
|
bridge = pci_get_device(pci_id->vendor, pci_id->device,
|
|
bridge);
|
|
if (!bridge) {
|
|
pci_id++;
|
|
continue;
|
|
}
|
|
if (pci_id->rev != PCI_ANY_ID) {
|
|
if (bridge->revision > pci_id->rev)
|
|
continue;
|
|
}
|
|
if (bridge->subordinate &&
|
|
(bridge->subordinate->number ==
|
|
tp->pdev->bus->number)) {
|
|
|
|
tp->tg3_flags2 |= TG3_FLG2_ICH_WORKAROUND;
|
|
pci_dev_put(bridge);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
|
|
static struct tg3_dev_id {
|
|
u32 vendor;
|
|
u32 device;
|
|
} bridge_chipsets[] = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0 },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1 },
|
|
{ },
|
|
};
|
|
struct tg3_dev_id *pci_id = &bridge_chipsets[0];
|
|
struct pci_dev *bridge = NULL;
|
|
|
|
while (pci_id->vendor != 0) {
|
|
bridge = pci_get_device(pci_id->vendor,
|
|
pci_id->device,
|
|
bridge);
|
|
if (!bridge) {
|
|
pci_id++;
|
|
continue;
|
|
}
|
|
if (bridge->subordinate &&
|
|
(bridge->subordinate->number <=
|
|
tp->pdev->bus->number) &&
|
|
(bridge->subordinate->subordinate >=
|
|
tp->pdev->bus->number)) {
|
|
tp->tg3_flags3 |= TG3_FLG3_5701_DMA_BUG;
|
|
pci_dev_put(bridge);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* The EPB bridge inside 5714, 5715, and 5780 cannot support
|
|
* DMA addresses > 40-bit. This bridge may have other additional
|
|
* 57xx devices behind it in some 4-port NIC designs for example.
|
|
* Any tg3 device found behind the bridge will also need the 40-bit
|
|
* DMA workaround.
|
|
*/
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
|
|
tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
|
|
tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
|
|
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
|
|
}
|
|
else {
|
|
struct pci_dev *bridge = NULL;
|
|
|
|
do {
|
|
bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
|
|
PCI_DEVICE_ID_SERVERWORKS_EPB,
|
|
bridge);
|
|
if (bridge && bridge->subordinate &&
|
|
(bridge->subordinate->number <=
|
|
tp->pdev->bus->number) &&
|
|
(bridge->subordinate->subordinate >=
|
|
tp->pdev->bus->number)) {
|
|
tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
|
|
pci_dev_put(bridge);
|
|
break;
|
|
}
|
|
} while (bridge);
|
|
}
|
|
|
|
/* Initialize misc host control in PCI block. */
|
|
tp->misc_host_ctrl |= (misc_ctrl_reg &
|
|
MISC_HOST_CTRL_CHIPREV);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
|
|
tp->misc_host_ctrl);
|
|
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714))
|
|
tp->pdev_peer = tg3_find_peer(tp);
|
|
|
|
/* Intentionally exclude ASIC_REV_5906 */
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
tp->tg3_flags3 |= TG3_FLG3_5755_PLUS;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 ||
|
|
(tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
|
|
tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
|
|
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
|
|
tp->tg3_flags2 |= TG3_FLG2_5705_PLUS;
|
|
|
|
/* 5700 B0 chips do not support checksumming correctly due
|
|
* to hardware bugs.
|
|
*/
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5700_B0)
|
|
tp->tg3_flags |= TG3_FLAG_BROKEN_CHECKSUMS;
|
|
else {
|
|
tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
|
|
tp->dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
|
|
if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
|
|
tp->dev->features |= NETIF_F_IPV6_CSUM;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
|
|
tp->tg3_flags |= TG3_FLAG_SUPPORT_MSI;
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX ||
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714 &&
|
|
tp->pci_chip_rev_id <= CHIPREV_ID_5714_A2 &&
|
|
tp->pdev_peer == tp->pdev))
|
|
tp->tg3_flags &= ~TG3_FLAG_SUPPORT_MSI;
|
|
|
|
if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2;
|
|
tp->tg3_flags2 |= TG3_FLG2_1SHOT_MSI;
|
|
} else {
|
|
tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1 | TG3_FLG2_TSO_BUG;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
|
|
ASIC_REV_5750 &&
|
|
tp->pci_chip_rev_id >= CHIPREV_ID_5750_C2)
|
|
tp->tg3_flags2 &= ~TG3_FLG2_TSO_BUG;
|
|
}
|
|
}
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
|
|
tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE;
|
|
|
|
pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
|
|
&pci_state_reg);
|
|
|
|
tp->pcie_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_EXP);
|
|
if (tp->pcie_cap != 0) {
|
|
u16 lnkctl;
|
|
|
|
tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
|
|
|
|
pcie_set_readrq(tp->pdev, 4096);
|
|
|
|
pci_read_config_word(tp->pdev,
|
|
tp->pcie_cap + PCI_EXP_LNKCTL,
|
|
&lnkctl);
|
|
if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN) {
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
|
|
tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_2;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_57780_A0 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_57780_A1)
|
|
tp->tg3_flags3 |= TG3_FLG3_CLKREQ_BUG;
|
|
}
|
|
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
|
|
tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
|
|
} else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
|
|
tp->pcix_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_PCIX);
|
|
if (!tp->pcix_cap) {
|
|
printk(KERN_ERR PFX "Cannot find PCI-X "
|
|
"capability, aborting.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (!(pci_state_reg & PCISTATE_CONV_PCI_MODE))
|
|
tp->tg3_flags |= TG3_FLAG_PCIX_MODE;
|
|
}
|
|
|
|
/* If we have an AMD 762 or VIA K8T800 chipset, write
|
|
* reordering to the mailbox registers done by the host
|
|
* controller can cause major troubles. We read back from
|
|
* every mailbox register write to force the writes to be
|
|
* posted to the chip in order.
|
|
*/
|
|
if (pci_dev_present(write_reorder_chipsets) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
|
|
tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
|
|
|
|
pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
|
|
&tp->pci_cacheline_sz);
|
|
pci_read_config_byte(tp->pdev, PCI_LATENCY_TIMER,
|
|
&tp->pci_lat_timer);
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
|
|
tp->pci_lat_timer < 64) {
|
|
tp->pci_lat_timer = 64;
|
|
pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER,
|
|
tp->pci_lat_timer);
|
|
}
|
|
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX) {
|
|
/* 5700 BX chips need to have their TX producer index
|
|
* mailboxes written twice to workaround a bug.
|
|
*/
|
|
tp->tg3_flags |= TG3_FLAG_TXD_MBOX_HWBUG;
|
|
|
|
/* If we are in PCI-X mode, enable register write workaround.
|
|
*
|
|
* The workaround is to use indirect register accesses
|
|
* for all chip writes not to mailbox registers.
|
|
*/
|
|
if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
|
|
u32 pm_reg;
|
|
|
|
tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
|
|
|
|
/* The chip can have it's power management PCI config
|
|
* space registers clobbered due to this bug.
|
|
* So explicitly force the chip into D0 here.
|
|
*/
|
|
pci_read_config_dword(tp->pdev,
|
|
tp->pm_cap + PCI_PM_CTRL,
|
|
&pm_reg);
|
|
pm_reg &= ~PCI_PM_CTRL_STATE_MASK;
|
|
pm_reg |= PCI_PM_CTRL_PME_ENABLE | 0 /* D0 */;
|
|
pci_write_config_dword(tp->pdev,
|
|
tp->pm_cap + PCI_PM_CTRL,
|
|
pm_reg);
|
|
|
|
/* Also, force SERR#/PERR# in PCI command. */
|
|
pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd);
|
|
pci_cmd |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
|
|
pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd);
|
|
}
|
|
}
|
|
|
|
if ((pci_state_reg & PCISTATE_BUS_SPEED_HIGH) != 0)
|
|
tp->tg3_flags |= TG3_FLAG_PCI_HIGH_SPEED;
|
|
if ((pci_state_reg & PCISTATE_BUS_32BIT) != 0)
|
|
tp->tg3_flags |= TG3_FLAG_PCI_32BIT;
|
|
|
|
/* Chip-specific fixup from Broadcom driver */
|
|
if ((tp->pci_chip_rev_id == CHIPREV_ID_5704_A0) &&
|
|
(!(pci_state_reg & PCISTATE_RETRY_SAME_DMA))) {
|
|
pci_state_reg |= PCISTATE_RETRY_SAME_DMA;
|
|
pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg);
|
|
}
|
|
|
|
/* Default fast path register access methods */
|
|
tp->read32 = tg3_read32;
|
|
tp->write32 = tg3_write32;
|
|
tp->read32_mbox = tg3_read32;
|
|
tp->write32_mbox = tg3_write32;
|
|
tp->write32_tx_mbox = tg3_write32;
|
|
tp->write32_rx_mbox = tg3_write32;
|
|
|
|
/* Various workaround register access methods */
|
|
if (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG)
|
|
tp->write32 = tg3_write_indirect_reg32;
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
|
|
((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5750_A0)) {
|
|
/*
|
|
* Back to back register writes can cause problems on these
|
|
* chips, the workaround is to read back all reg writes
|
|
* except those to mailbox regs.
|
|
*
|
|
* See tg3_write_indirect_reg32().
|
|
*/
|
|
tp->write32 = tg3_write_flush_reg32;
|
|
}
|
|
|
|
|
|
if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
|
|
(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
|
|
tp->write32_tx_mbox = tg3_write32_tx_mbox;
|
|
if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
|
|
tp->write32_rx_mbox = tg3_write_flush_reg32;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND) {
|
|
tp->read32 = tg3_read_indirect_reg32;
|
|
tp->write32 = tg3_write_indirect_reg32;
|
|
tp->read32_mbox = tg3_read_indirect_mbox;
|
|
tp->write32_mbox = tg3_write_indirect_mbox;
|
|
tp->write32_tx_mbox = tg3_write_indirect_mbox;
|
|
tp->write32_rx_mbox = tg3_write_indirect_mbox;
|
|
|
|
iounmap(tp->regs);
|
|
tp->regs = NULL;
|
|
|
|
pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd);
|
|
pci_cmd &= ~PCI_COMMAND_MEMORY;
|
|
pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd);
|
|
}
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
tp->read32_mbox = tg3_read32_mbox_5906;
|
|
tp->write32_mbox = tg3_write32_mbox_5906;
|
|
tp->write32_tx_mbox = tg3_write32_mbox_5906;
|
|
tp->write32_rx_mbox = tg3_write32_mbox_5906;
|
|
}
|
|
|
|
if (tp->write32 == tg3_write_indirect_reg32 ||
|
|
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
|
|
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
|
|
|
|
/* Get eeprom hw config before calling tg3_set_power_state().
|
|
* In particular, the TG3_FLG2_IS_NIC flag must be
|
|
* determined before calling tg3_set_power_state() so that
|
|
* we know whether or not to switch out of Vaux power.
|
|
* When the flag is set, it means that GPIO1 is used for eeprom
|
|
* write protect and also implies that it is a LOM where GPIOs
|
|
* are not used to switch power.
|
|
*/
|
|
tg3_get_eeprom_hw_cfg(tp);
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
|
|
/* Allow reads and writes to the
|
|
* APE register and memory space.
|
|
*/
|
|
pci_state_reg |= PCISTATE_ALLOW_APE_CTLSPC_WR |
|
|
PCISTATE_ALLOW_APE_SHMEM_WR;
|
|
pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE,
|
|
pci_state_reg);
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
|
|
|
|
/* Set up tp->grc_local_ctrl before calling tg3_set_power_state().
|
|
* GPIO1 driven high will bring 5700's external PHY out of reset.
|
|
* It is also used as eeprom write protect on LOMs.
|
|
*/
|
|
tp->grc_local_ctrl = GRC_LCLCTRL_INT_ON_ATTN | GRC_LCLCTRL_AUTO_SEEPROM;
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
|
|
(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))
|
|
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT1);
|
|
/* Unused GPIO3 must be driven as output on 5752 because there
|
|
* are no pull-up resistors on unused GPIO pins.
|
|
*/
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
|
|
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
|
|
|
|
if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||
|
|
tp->pdev->device == TG3PCI_DEVICE_TIGON3_5761S) {
|
|
/* Turn off the debug UART. */
|
|
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
|
|
if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
|
|
/* Keep VMain power. */
|
|
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
|
|
GRC_LCLCTRL_GPIO_OUTPUT0;
|
|
}
|
|
|
|
/* Force the chip into D0. */
|
|
err = tg3_set_power_state(tp, PCI_D0);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "(%s) transition to D0 failed\n",
|
|
pci_name(tp->pdev));
|
|
return err;
|
|
}
|
|
|
|
/* Derive initial jumbo mode from MTU assigned in
|
|
* ether_setup() via the alloc_etherdev() call
|
|
*/
|
|
if (tp->dev->mtu > ETH_DATA_LEN &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_5780_CLASS))
|
|
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
|
|
|
|
/* Determine WakeOnLan speed to use. */
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5701_B2) {
|
|
tp->tg3_flags &= ~(TG3_FLAG_WOL_SPEED_100MB);
|
|
} else {
|
|
tp->tg3_flags |= TG3_FLAG_WOL_SPEED_100MB;
|
|
}
|
|
|
|
/* A few boards don't want Ethernet@WireSpeed phy feature */
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
|
|
((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
|
|
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
|
|
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
|
|
tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED;
|
|
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5703_AX ||
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5704_AX)
|
|
tp->tg3_flags2 |= TG3_FLG2_PHY_ADC_BUG;
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0)
|
|
tp->tg3_flags2 |= TG3_FLG2_PHY_5704_A0_BUG;
|
|
|
|
if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906 &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780) {
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) {
|
|
if (tp->pdev->device != PCI_DEVICE_ID_TIGON3_5756 &&
|
|
tp->pdev->device != PCI_DEVICE_ID_TIGON3_5722)
|
|
tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG;
|
|
if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5755M)
|
|
tp->tg3_flags2 |= TG3_FLG2_PHY_ADJUST_TRIM;
|
|
} else
|
|
tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) {
|
|
tp->phy_otp = tg3_read_otp_phycfg(tp);
|
|
if (tp->phy_otp == 0)
|
|
tp->phy_otp = TG3_OTP_DEFAULT;
|
|
}
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_CPMU_PRESENT)
|
|
tp->mi_mode = MAC_MI_MODE_500KHZ_CONST;
|
|
else
|
|
tp->mi_mode = MAC_MI_MODE_BASE;
|
|
|
|
tp->coalesce_mode = 0;
|
|
if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX &&
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX)
|
|
tp->coalesce_mode |= HOSTCC_MODE_32BYTE;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
tp->tg3_flags3 |= TG3_FLG3_USE_PHYLIB;
|
|
|
|
err = tg3_mdio_init(tp);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Initialize data/descriptor byte/word swapping. */
|
|
val = tr32(GRC_MODE);
|
|
val &= GRC_MODE_HOST_STACKUP;
|
|
tw32(GRC_MODE, val | tp->grc_mode);
|
|
|
|
tg3_switch_clocks(tp);
|
|
|
|
/* Clear this out for sanity. */
|
|
tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
|
|
|
|
pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
|
|
&pci_state_reg);
|
|
if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0 &&
|
|
(tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) == 0) {
|
|
u32 chiprevid = GET_CHIP_REV_ID(tp->misc_host_ctrl);
|
|
|
|
if (chiprevid == CHIPREV_ID_5701_A0 ||
|
|
chiprevid == CHIPREV_ID_5701_B0 ||
|
|
chiprevid == CHIPREV_ID_5701_B2 ||
|
|
chiprevid == CHIPREV_ID_5701_B5) {
|
|
void __iomem *sram_base;
|
|
|
|
/* Write some dummy words into the SRAM status block
|
|
* area, see if it reads back correctly. If the return
|
|
* value is bad, force enable the PCIX workaround.
|
|
*/
|
|
sram_base = tp->regs + NIC_SRAM_WIN_BASE + NIC_SRAM_STATS_BLK;
|
|
|
|
writel(0x00000000, sram_base);
|
|
writel(0x00000000, sram_base + 4);
|
|
writel(0xffffffff, sram_base + 4);
|
|
if (readl(sram_base) != 0x00000000)
|
|
tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
|
|
}
|
|
}
|
|
|
|
udelay(50);
|
|
tg3_nvram_init(tp);
|
|
|
|
grc_misc_cfg = tr32(GRC_MISC_CFG);
|
|
grc_misc_cfg &= GRC_MISC_CFG_BOARD_ID_MASK;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
|
|
(grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788 ||
|
|
grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M))
|
|
tp->tg3_flags2 |= TG3_FLG2_IS_5788;
|
|
|
|
if (!(tp->tg3_flags2 & TG3_FLG2_IS_5788) &&
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700))
|
|
tp->tg3_flags |= TG3_FLAG_TAGGED_STATUS;
|
|
if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) {
|
|
tp->coalesce_mode |= (HOSTCC_MODE_CLRTICK_RXBD |
|
|
HOSTCC_MODE_CLRTICK_TXBD);
|
|
|
|
tp->misc_host_ctrl |= MISC_HOST_CTRL_TAGGED_STATUS;
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
|
|
tp->misc_host_ctrl);
|
|
}
|
|
|
|
/* Preserve the APE MAC_MODE bits */
|
|
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
|
|
tp->mac_mode = tr32(MAC_MODE) |
|
|
MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
|
|
else
|
|
tp->mac_mode = TG3_DEF_MAC_MODE;
|
|
|
|
/* these are limited to 10/100 only */
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
|
|
(grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
|
|
tp->pdev->vendor == PCI_VENDOR_ID_BROADCOM &&
|
|
(tp->pdev->device == PCI_DEVICE_ID_TIGON3_5901 ||
|
|
tp->pdev->device == PCI_DEVICE_ID_TIGON3_5901_2 ||
|
|
tp->pdev->device == PCI_DEVICE_ID_TIGON3_5705F)) ||
|
|
(tp->pdev->vendor == PCI_VENDOR_ID_BROADCOM &&
|
|
(tp->pdev->device == PCI_DEVICE_ID_TIGON3_5751F ||
|
|
tp->pdev->device == PCI_DEVICE_ID_TIGON3_5753F ||
|
|
tp->pdev->device == PCI_DEVICE_ID_TIGON3_5787F)) ||
|
|
tp->pdev->device == TG3PCI_DEVICE_TIGON3_57790 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
|
|
tp->tg3_flags |= TG3_FLAG_10_100_ONLY;
|
|
|
|
err = tg3_phy_probe(tp);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "(%s) phy probe failed, err %d\n",
|
|
pci_name(tp->pdev), err);
|
|
/* ... but do not return immediately ... */
|
|
tg3_mdio_fini(tp);
|
|
}
|
|
|
|
tg3_read_partno(tp);
|
|
tg3_read_fw_ver(tp);
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
|
|
tp->tg3_flags &= ~TG3_FLAG_USE_MI_INTERRUPT;
|
|
} else {
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
|
|
tp->tg3_flags |= TG3_FLAG_USE_MI_INTERRUPT;
|
|
else
|
|
tp->tg3_flags &= ~TG3_FLAG_USE_MI_INTERRUPT;
|
|
}
|
|
|
|
/* 5700 {AX,BX} chips have a broken status block link
|
|
* change bit implementation, so we must use the
|
|
* status register in those cases.
|
|
*/
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
|
|
tp->tg3_flags |= TG3_FLAG_USE_LINKCHG_REG;
|
|
else
|
|
tp->tg3_flags &= ~TG3_FLAG_USE_LINKCHG_REG;
|
|
|
|
/* The led_ctrl is set during tg3_phy_probe, here we might
|
|
* have to force the link status polling mechanism based
|
|
* upon subsystem IDs.
|
|
*/
|
|
if (tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
|
|
tp->tg3_flags |= (TG3_FLAG_USE_MI_INTERRUPT |
|
|
TG3_FLAG_USE_LINKCHG_REG);
|
|
}
|
|
|
|
/* For all SERDES we poll the MAC status register. */
|
|
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
|
|
tp->tg3_flags |= TG3_FLAG_POLL_SERDES;
|
|
else
|
|
tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
|
|
|
|
tp->rx_offset = NET_IP_ALIGN;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
|
|
(tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0)
|
|
tp->rx_offset = 0;
|
|
|
|
tp->rx_std_max_post = TG3_RX_RING_SIZE;
|
|
|
|
/* Increment the rx prod index on the rx std ring by at most
|
|
* 8 for these chips to workaround hw errata.
|
|
*/
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
|
|
tp->rx_std_max_post = 8;
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND)
|
|
tp->pwrmgmt_thresh = tr32(PCIE_PWR_MGMT_THRESH) &
|
|
PCIE_PWR_MGMT_L1_THRESH_MSK;
|
|
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_SPARC
|
|
static int __devinit tg3_get_macaddr_sparc(struct tg3 *tp)
|
|
{
|
|
struct net_device *dev = tp->dev;
|
|
struct pci_dev *pdev = tp->pdev;
|
|
struct device_node *dp = pci_device_to_OF_node(pdev);
|
|
const unsigned char *addr;
|
|
int len;
|
|
|
|
addr = of_get_property(dp, "local-mac-address", &len);
|
|
if (addr && len == 6) {
|
|
memcpy(dev->dev_addr, addr, 6);
|
|
memcpy(dev->perm_addr, dev->dev_addr, 6);
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int __devinit tg3_get_default_macaddr_sparc(struct tg3 *tp)
|
|
{
|
|
struct net_device *dev = tp->dev;
|
|
|
|
memcpy(dev->dev_addr, idprom->id_ethaddr, 6);
|
|
memcpy(dev->perm_addr, idprom->id_ethaddr, 6);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __devinit tg3_get_device_address(struct tg3 *tp)
|
|
{
|
|
struct net_device *dev = tp->dev;
|
|
u32 hi, lo, mac_offset;
|
|
int addr_ok = 0;
|
|
|
|
#ifdef CONFIG_SPARC
|
|
if (!tg3_get_macaddr_sparc(tp))
|
|
return 0;
|
|
#endif
|
|
|
|
mac_offset = 0x7c;
|
|
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
|
|
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
|
|
if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
|
|
mac_offset = 0xcc;
|
|
if (tg3_nvram_lock(tp))
|
|
tw32_f(NVRAM_CMD, NVRAM_CMD_RESET);
|
|
else
|
|
tg3_nvram_unlock(tp);
|
|
}
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
|
|
mac_offset = 0x10;
|
|
|
|
/* First try to get it from MAC address mailbox. */
|
|
tg3_read_mem(tp, NIC_SRAM_MAC_ADDR_HIGH_MBOX, &hi);
|
|
if ((hi >> 16) == 0x484b) {
|
|
dev->dev_addr[0] = (hi >> 8) & 0xff;
|
|
dev->dev_addr[1] = (hi >> 0) & 0xff;
|
|
|
|
tg3_read_mem(tp, NIC_SRAM_MAC_ADDR_LOW_MBOX, &lo);
|
|
dev->dev_addr[2] = (lo >> 24) & 0xff;
|
|
dev->dev_addr[3] = (lo >> 16) & 0xff;
|
|
dev->dev_addr[4] = (lo >> 8) & 0xff;
|
|
dev->dev_addr[5] = (lo >> 0) & 0xff;
|
|
|
|
/* Some old bootcode may report a 0 MAC address in SRAM */
|
|
addr_ok = is_valid_ether_addr(&dev->dev_addr[0]);
|
|
}
|
|
if (!addr_ok) {
|
|
/* Next, try NVRAM. */
|
|
if (!(tp->tg3_flags3 & TG3_FLG3_NO_NVRAM) &&
|
|
!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) &&
|
|
!tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) {
|
|
memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2);
|
|
memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo));
|
|
}
|
|
/* Finally just fetch it out of the MAC control regs. */
|
|
else {
|
|
hi = tr32(MAC_ADDR_0_HIGH);
|
|
lo = tr32(MAC_ADDR_0_LOW);
|
|
|
|
dev->dev_addr[5] = lo & 0xff;
|
|
dev->dev_addr[4] = (lo >> 8) & 0xff;
|
|
dev->dev_addr[3] = (lo >> 16) & 0xff;
|
|
dev->dev_addr[2] = (lo >> 24) & 0xff;
|
|
dev->dev_addr[1] = hi & 0xff;
|
|
dev->dev_addr[0] = (hi >> 8) & 0xff;
|
|
}
|
|
}
|
|
|
|
if (!is_valid_ether_addr(&dev->dev_addr[0])) {
|
|
#ifdef CONFIG_SPARC
|
|
if (!tg3_get_default_macaddr_sparc(tp))
|
|
return 0;
|
|
#endif
|
|
return -EINVAL;
|
|
}
|
|
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
|
|
return 0;
|
|
}
|
|
|
|
#define BOUNDARY_SINGLE_CACHELINE 1
|
|
#define BOUNDARY_MULTI_CACHELINE 2
|
|
|
|
static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val)
|
|
{
|
|
int cacheline_size;
|
|
u8 byte;
|
|
int goal;
|
|
|
|
pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte);
|
|
if (byte == 0)
|
|
cacheline_size = 1024;
|
|
else
|
|
cacheline_size = (int) byte * 4;
|
|
|
|
/* On 5703 and later chips, the boundary bits have no
|
|
* effect.
|
|
*/
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
|
|
goto out;
|
|
|
|
#if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC)
|
|
goal = BOUNDARY_MULTI_CACHELINE;
|
|
#else
|
|
#if defined(CONFIG_SPARC64) || defined(CONFIG_ALPHA)
|
|
goal = BOUNDARY_SINGLE_CACHELINE;
|
|
#else
|
|
goal = 0;
|
|
#endif
|
|
#endif
|
|
|
|
if (!goal)
|
|
goto out;
|
|
|
|
/* PCI controllers on most RISC systems tend to disconnect
|
|
* when a device tries to burst across a cache-line boundary.
|
|
* Therefore, letting tg3 do so just wastes PCI bandwidth.
|
|
*
|
|
* Unfortunately, for PCI-E there are only limited
|
|
* write-side controls for this, and thus for reads
|
|
* we will still get the disconnects. We'll also waste
|
|
* these PCI cycles for both read and write for chips
|
|
* other than 5700 and 5701 which do not implement the
|
|
* boundary bits.
|
|
*/
|
|
if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) {
|
|
switch (cacheline_size) {
|
|
case 16:
|
|
case 32:
|
|
case 64:
|
|
case 128:
|
|
if (goal == BOUNDARY_SINGLE_CACHELINE) {
|
|
val |= (DMA_RWCTRL_READ_BNDRY_128_PCIX |
|
|
DMA_RWCTRL_WRITE_BNDRY_128_PCIX);
|
|
} else {
|
|
val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX |
|
|
DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
|
|
}
|
|
break;
|
|
|
|
case 256:
|
|
val |= (DMA_RWCTRL_READ_BNDRY_256_PCIX |
|
|
DMA_RWCTRL_WRITE_BNDRY_256_PCIX);
|
|
break;
|
|
|
|
default:
|
|
val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX |
|
|
DMA_RWCTRL_WRITE_BNDRY_384_PCIX);
|
|
break;
|
|
}
|
|
} else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
|
|
switch (cacheline_size) {
|
|
case 16:
|
|
case 32:
|
|
case 64:
|
|
if (goal == BOUNDARY_SINGLE_CACHELINE) {
|
|
val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE;
|
|
val |= DMA_RWCTRL_WRITE_BNDRY_64_PCIE;
|
|
break;
|
|
}
|
|
/* fallthrough */
|
|
case 128:
|
|
default:
|
|
val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE;
|
|
val |= DMA_RWCTRL_WRITE_BNDRY_128_PCIE;
|
|
break;
|
|
}
|
|
} else {
|
|
switch (cacheline_size) {
|
|
case 16:
|
|
if (goal == BOUNDARY_SINGLE_CACHELINE) {
|
|
val |= (DMA_RWCTRL_READ_BNDRY_16 |
|
|
DMA_RWCTRL_WRITE_BNDRY_16);
|
|
break;
|
|
}
|
|
/* fallthrough */
|
|
case 32:
|
|
if (goal == BOUNDARY_SINGLE_CACHELINE) {
|
|
val |= (DMA_RWCTRL_READ_BNDRY_32 |
|
|
DMA_RWCTRL_WRITE_BNDRY_32);
|
|
break;
|
|
}
|
|
/* fallthrough */
|
|
case 64:
|
|
if (goal == BOUNDARY_SINGLE_CACHELINE) {
|
|
val |= (DMA_RWCTRL_READ_BNDRY_64 |
|
|
DMA_RWCTRL_WRITE_BNDRY_64);
|
|
break;
|
|
}
|
|
/* fallthrough */
|
|
case 128:
|
|
if (goal == BOUNDARY_SINGLE_CACHELINE) {
|
|
val |= (DMA_RWCTRL_READ_BNDRY_128 |
|
|
DMA_RWCTRL_WRITE_BNDRY_128);
|
|
break;
|
|
}
|
|
/* fallthrough */
|
|
case 256:
|
|
val |= (DMA_RWCTRL_READ_BNDRY_256 |
|
|
DMA_RWCTRL_WRITE_BNDRY_256);
|
|
break;
|
|
case 512:
|
|
val |= (DMA_RWCTRL_READ_BNDRY_512 |
|
|
DMA_RWCTRL_WRITE_BNDRY_512);
|
|
break;
|
|
case 1024:
|
|
default:
|
|
val |= (DMA_RWCTRL_READ_BNDRY_1024 |
|
|
DMA_RWCTRL_WRITE_BNDRY_1024);
|
|
break;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return val;
|
|
}
|
|
|
|
static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dma, int size, int to_device)
|
|
{
|
|
struct tg3_internal_buffer_desc test_desc;
|
|
u32 sram_dma_descs;
|
|
int i, ret;
|
|
|
|
sram_dma_descs = NIC_SRAM_DMA_DESC_POOL_BASE;
|
|
|
|
tw32(FTQ_RCVBD_COMP_FIFO_ENQDEQ, 0);
|
|
tw32(FTQ_RCVDATA_COMP_FIFO_ENQDEQ, 0);
|
|
tw32(RDMAC_STATUS, 0);
|
|
tw32(WDMAC_STATUS, 0);
|
|
|
|
tw32(BUFMGR_MODE, 0);
|
|
tw32(FTQ_RESET, 0);
|
|
|
|
test_desc.addr_hi = ((u64) buf_dma) >> 32;
|
|
test_desc.addr_lo = buf_dma & 0xffffffff;
|
|
test_desc.nic_mbuf = 0x00002100;
|
|
test_desc.len = size;
|
|
|
|
/*
|
|
* HP ZX1 was seeing test failures for 5701 cards running at 33Mhz
|
|
* the *second* time the tg3 driver was getting loaded after an
|
|
* initial scan.
|
|
*
|
|
* Broadcom tells me:
|
|
* ...the DMA engine is connected to the GRC block and a DMA
|
|
* reset may affect the GRC block in some unpredictable way...
|
|
* The behavior of resets to individual blocks has not been tested.
|
|
*
|
|
* Broadcom noted the GRC reset will also reset all sub-components.
|
|
*/
|
|
if (to_device) {
|
|
test_desc.cqid_sqid = (13 << 8) | 2;
|
|
|
|
tw32_f(RDMAC_MODE, RDMAC_MODE_ENABLE);
|
|
udelay(40);
|
|
} else {
|
|
test_desc.cqid_sqid = (16 << 8) | 7;
|
|
|
|
tw32_f(WDMAC_MODE, WDMAC_MODE_ENABLE);
|
|
udelay(40);
|
|
}
|
|
test_desc.flags = 0x00000005;
|
|
|
|
for (i = 0; i < (sizeof(test_desc) / sizeof(u32)); i++) {
|
|
u32 val;
|
|
|
|
val = *(((u32 *)&test_desc) + i);
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR,
|
|
sram_dma_descs + (i * sizeof(u32)));
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
|
|
}
|
|
pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
|
|
|
|
if (to_device) {
|
|
tw32(FTQ_DMA_HIGH_READ_FIFO_ENQDEQ, sram_dma_descs);
|
|
} else {
|
|
tw32(FTQ_DMA_HIGH_WRITE_FIFO_ENQDEQ, sram_dma_descs);
|
|
}
|
|
|
|
ret = -ENODEV;
|
|
for (i = 0; i < 40; i++) {
|
|
u32 val;
|
|
|
|
if (to_device)
|
|
val = tr32(FTQ_RCVBD_COMP_FIFO_ENQDEQ);
|
|
else
|
|
val = tr32(FTQ_RCVDATA_COMP_FIFO_ENQDEQ);
|
|
if ((val & 0xffff) == sram_dma_descs) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define TEST_BUFFER_SIZE 0x2000
|
|
|
|
static int __devinit tg3_test_dma(struct tg3 *tp)
|
|
{
|
|
dma_addr_t buf_dma;
|
|
u32 *buf, saved_dma_rwctrl;
|
|
int ret;
|
|
|
|
buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma);
|
|
if (!buf) {
|
|
ret = -ENOMEM;
|
|
goto out_nofree;
|
|
}
|
|
|
|
tp->dma_rwctrl = ((0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
|
|
(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT));
|
|
|
|
tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl);
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
|
|
/* DMA read watermark not used on PCIE */
|
|
tp->dma_rwctrl |= 0x00180000;
|
|
} else if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
|
|
tp->dma_rwctrl |= 0x003f0000;
|
|
else
|
|
tp->dma_rwctrl |= 0x003f000f;
|
|
} else {
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
|
|
u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f);
|
|
u32 read_water = 0x7;
|
|
|
|
/* If the 5704 is behind the EPB bridge, we can
|
|
* do the less restrictive ONE_DMA workaround for
|
|
* better performance.
|
|
*/
|
|
if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
|
|
tp->dma_rwctrl |= 0x8000;
|
|
else if (ccval == 0x6 || ccval == 0x7)
|
|
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703)
|
|
read_water = 4;
|
|
/* Set bit 23 to enable PCIX hw bug fix */
|
|
tp->dma_rwctrl |=
|
|
(read_water << DMA_RWCTRL_READ_WATER_SHIFT) |
|
|
(0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) |
|
|
(1 << 23);
|
|
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
|
|
/* 5780 always in PCIX mode */
|
|
tp->dma_rwctrl |= 0x00144000;
|
|
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
|
|
/* 5714 always in PCIX mode */
|
|
tp->dma_rwctrl |= 0x00148000;
|
|
} else {
|
|
tp->dma_rwctrl |= 0x001b000f;
|
|
}
|
|
}
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
|
|
tp->dma_rwctrl &= 0xfffffff0;
|
|
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) {
|
|
/* Remove this if it causes problems for some boards. */
|
|
tp->dma_rwctrl |= DMA_RWCTRL_USE_MEM_READ_MULT;
|
|
|
|
/* On 5700/5701 chips, we need to set this bit.
|
|
* Otherwise the chip will issue cacheline transactions
|
|
* to streamable DMA memory with not all the byte
|
|
* enables turned on. This is an error on several
|
|
* RISC PCI controllers, in particular sparc64.
|
|
*
|
|
* On 5703/5704 chips, this bit has been reassigned
|
|
* a different meaning. In particular, it is used
|
|
* on those chips to enable a PCI-X workaround.
|
|
*/
|
|
tp->dma_rwctrl |= DMA_RWCTRL_ASSERT_ALL_BE;
|
|
}
|
|
|
|
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
|
|
|
|
#if 0
|
|
/* Unneeded, already done by tg3_get_invariants. */
|
|
tg3_switch_clocks(tp);
|
|
#endif
|
|
|
|
ret = 0;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701)
|
|
goto out;
|
|
|
|
/* It is best to perform DMA test with maximum write burst size
|
|
* to expose the 5700/5701 write DMA bug.
|
|
*/
|
|
saved_dma_rwctrl = tp->dma_rwctrl;
|
|
tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK;
|
|
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
|
|
|
|
while (1) {
|
|
u32 *p = buf, i;
|
|
|
|
for (i = 0; i < TEST_BUFFER_SIZE / sizeof(u32); i++)
|
|
p[i] = i;
|
|
|
|
/* Send the buffer to the chip. */
|
|
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 1);
|
|
if (ret) {
|
|
printk(KERN_ERR "tg3_test_dma() Write the buffer failed %d\n", ret);
|
|
break;
|
|
}
|
|
|
|
#if 0
|
|
/* validate data reached card RAM correctly. */
|
|
for (i = 0; i < TEST_BUFFER_SIZE / sizeof(u32); i++) {
|
|
u32 val;
|
|
tg3_read_mem(tp, 0x2100 + (i*4), &val);
|
|
if (le32_to_cpu(val) != p[i]) {
|
|
printk(KERN_ERR " tg3_test_dma() Card buffer corrupted on write! (%d != %d)\n", val, i);
|
|
/* ret = -ENODEV here? */
|
|
}
|
|
p[i] = 0;
|
|
}
|
|
#endif
|
|
/* Now read it back. */
|
|
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 0);
|
|
if (ret) {
|
|
printk(KERN_ERR "tg3_test_dma() Read the buffer failed %d\n", ret);
|
|
|
|
break;
|
|
}
|
|
|
|
/* Verify it. */
|
|
for (i = 0; i < TEST_BUFFER_SIZE / sizeof(u32); i++) {
|
|
if (p[i] == i)
|
|
continue;
|
|
|
|
if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
|
|
DMA_RWCTRL_WRITE_BNDRY_16) {
|
|
tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK;
|
|
tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16;
|
|
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
|
|
break;
|
|
} else {
|
|
printk(KERN_ERR "tg3_test_dma() buffer corrupted on read back! (%d != %d)\n", p[i], i);
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (i == (TEST_BUFFER_SIZE / sizeof(u32))) {
|
|
/* Success. */
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
|
|
DMA_RWCTRL_WRITE_BNDRY_16) {
|
|
static struct pci_device_id dma_wait_state_chipsets[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_APPLE,
|
|
PCI_DEVICE_ID_APPLE_UNI_N_PCI15) },
|
|
{ },
|
|
};
|
|
|
|
/* DMA test passed without adjusting DMA boundary,
|
|
* now look for chipsets that are known to expose the
|
|
* DMA bug without failing the test.
|
|
*/
|
|
if (pci_dev_present(dma_wait_state_chipsets)) {
|
|
tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK;
|
|
tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16;
|
|
}
|
|
else
|
|
/* Safe to use the calculated DMA boundary. */
|
|
tp->dma_rwctrl = saved_dma_rwctrl;
|
|
|
|
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
|
|
}
|
|
|
|
out:
|
|
pci_free_consistent(tp->pdev, TEST_BUFFER_SIZE, buf, buf_dma);
|
|
out_nofree:
|
|
return ret;
|
|
}
|
|
|
|
static void __devinit tg3_init_link_config(struct tg3 *tp)
|
|
{
|
|
tp->link_config.advertising =
|
|
(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
|
|
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
|
|
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full |
|
|
ADVERTISED_Autoneg | ADVERTISED_MII);
|
|
tp->link_config.speed = SPEED_INVALID;
|
|
tp->link_config.duplex = DUPLEX_INVALID;
|
|
tp->link_config.autoneg = AUTONEG_ENABLE;
|
|
tp->link_config.active_speed = SPEED_INVALID;
|
|
tp->link_config.active_duplex = DUPLEX_INVALID;
|
|
tp->link_config.phy_is_low_power = 0;
|
|
tp->link_config.orig_speed = SPEED_INVALID;
|
|
tp->link_config.orig_duplex = DUPLEX_INVALID;
|
|
tp->link_config.orig_autoneg = AUTONEG_INVALID;
|
|
}
|
|
|
|
static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
|
|
{
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
|
|
tp->bufmgr_config.mbuf_read_dma_low_water =
|
|
DEFAULT_MB_RDMA_LOW_WATER_5705;
|
|
tp->bufmgr_config.mbuf_mac_rx_low_water =
|
|
DEFAULT_MB_MACRX_LOW_WATER_5705;
|
|
tp->bufmgr_config.mbuf_high_water =
|
|
DEFAULT_MB_HIGH_WATER_5705;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
|
|
tp->bufmgr_config.mbuf_mac_rx_low_water =
|
|
DEFAULT_MB_MACRX_LOW_WATER_5906;
|
|
tp->bufmgr_config.mbuf_high_water =
|
|
DEFAULT_MB_HIGH_WATER_5906;
|
|
}
|
|
|
|
tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
|
|
DEFAULT_MB_RDMA_LOW_WATER_JUMBO_5780;
|
|
tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
|
|
DEFAULT_MB_MACRX_LOW_WATER_JUMBO_5780;
|
|
tp->bufmgr_config.mbuf_high_water_jumbo =
|
|
DEFAULT_MB_HIGH_WATER_JUMBO_5780;
|
|
} else {
|
|
tp->bufmgr_config.mbuf_read_dma_low_water =
|
|
DEFAULT_MB_RDMA_LOW_WATER;
|
|
tp->bufmgr_config.mbuf_mac_rx_low_water =
|
|
DEFAULT_MB_MACRX_LOW_WATER;
|
|
tp->bufmgr_config.mbuf_high_water =
|
|
DEFAULT_MB_HIGH_WATER;
|
|
|
|
tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
|
|
DEFAULT_MB_RDMA_LOW_WATER_JUMBO;
|
|
tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
|
|
DEFAULT_MB_MACRX_LOW_WATER_JUMBO;
|
|
tp->bufmgr_config.mbuf_high_water_jumbo =
|
|
DEFAULT_MB_HIGH_WATER_JUMBO;
|
|
}
|
|
|
|
tp->bufmgr_config.dma_low_water = DEFAULT_DMA_LOW_WATER;
|
|
tp->bufmgr_config.dma_high_water = DEFAULT_DMA_HIGH_WATER;
|
|
}
|
|
|
|
static char * __devinit tg3_phy_string(struct tg3 *tp)
|
|
{
|
|
switch (tp->phy_id & PHY_ID_MASK) {
|
|
case PHY_ID_BCM5400: return "5400";
|
|
case PHY_ID_BCM5401: return "5401";
|
|
case PHY_ID_BCM5411: return "5411";
|
|
case PHY_ID_BCM5701: return "5701";
|
|
case PHY_ID_BCM5703: return "5703";
|
|
case PHY_ID_BCM5704: return "5704";
|
|
case PHY_ID_BCM5705: return "5705";
|
|
case PHY_ID_BCM5750: return "5750";
|
|
case PHY_ID_BCM5752: return "5752";
|
|
case PHY_ID_BCM5714: return "5714";
|
|
case PHY_ID_BCM5780: return "5780";
|
|
case PHY_ID_BCM5755: return "5755";
|
|
case PHY_ID_BCM5787: return "5787";
|
|
case PHY_ID_BCM5784: return "5784";
|
|
case PHY_ID_BCM5756: return "5722/5756";
|
|
case PHY_ID_BCM5906: return "5906";
|
|
case PHY_ID_BCM5761: return "5761";
|
|
case PHY_ID_BCM8002: return "8002/serdes";
|
|
case 0: return "serdes";
|
|
default: return "unknown";
|
|
}
|
|
}
|
|
|
|
static char * __devinit tg3_bus_string(struct tg3 *tp, char *str)
|
|
{
|
|
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
|
|
strcpy(str, "PCI Express");
|
|
return str;
|
|
} else if (tp->tg3_flags & TG3_FLAG_PCIX_MODE) {
|
|
u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL) & 0x1f;
|
|
|
|
strcpy(str, "PCIX:");
|
|
|
|
if ((clock_ctrl == 7) ||
|
|
((tr32(GRC_MISC_CFG) & GRC_MISC_CFG_BOARD_ID_MASK) ==
|
|
GRC_MISC_CFG_BOARD_ID_5704CIOBE))
|
|
strcat(str, "133MHz");
|
|
else if (clock_ctrl == 0)
|
|
strcat(str, "33MHz");
|
|
else if (clock_ctrl == 2)
|
|
strcat(str, "50MHz");
|
|
else if (clock_ctrl == 4)
|
|
strcat(str, "66MHz");
|
|
else if (clock_ctrl == 6)
|
|
strcat(str, "100MHz");
|
|
} else {
|
|
strcpy(str, "PCI:");
|
|
if (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED)
|
|
strcat(str, "66MHz");
|
|
else
|
|
strcat(str, "33MHz");
|
|
}
|
|
if (tp->tg3_flags & TG3_FLAG_PCI_32BIT)
|
|
strcat(str, ":32-bit");
|
|
else
|
|
strcat(str, ":64-bit");
|
|
return str;
|
|
}
|
|
|
|
static struct pci_dev * __devinit tg3_find_peer(struct tg3 *tp)
|
|
{
|
|
struct pci_dev *peer;
|
|
unsigned int func, devnr = tp->pdev->devfn & ~7;
|
|
|
|
for (func = 0; func < 8; func++) {
|
|
peer = pci_get_slot(tp->pdev->bus, devnr | func);
|
|
if (peer && peer != tp->pdev)
|
|
break;
|
|
pci_dev_put(peer);
|
|
}
|
|
/* 5704 can be configured in single-port mode, set peer to
|
|
* tp->pdev in that case.
|
|
*/
|
|
if (!peer) {
|
|
peer = tp->pdev;
|
|
return peer;
|
|
}
|
|
|
|
/*
|
|
* We don't need to keep the refcount elevated; there's no way
|
|
* to remove one half of this device without removing the other
|
|
*/
|
|
pci_dev_put(peer);
|
|
|
|
return peer;
|
|
}
|
|
|
|
static void __devinit tg3_init_coal(struct tg3 *tp)
|
|
{
|
|
struct ethtool_coalesce *ec = &tp->coal;
|
|
|
|
memset(ec, 0, sizeof(*ec));
|
|
ec->cmd = ETHTOOL_GCOALESCE;
|
|
ec->rx_coalesce_usecs = LOW_RXCOL_TICKS;
|
|
ec->tx_coalesce_usecs = LOW_TXCOL_TICKS;
|
|
ec->rx_max_coalesced_frames = LOW_RXMAX_FRAMES;
|
|
ec->tx_max_coalesced_frames = LOW_TXMAX_FRAMES;
|
|
ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT;
|
|
ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT;
|
|
ec->rx_max_coalesced_frames_irq = DEFAULT_RXCOAL_MAXF_INT;
|
|
ec->tx_max_coalesced_frames_irq = DEFAULT_TXCOAL_MAXF_INT;
|
|
ec->stats_block_coalesce_usecs = DEFAULT_STAT_COAL_TICKS;
|
|
|
|
if (tp->coalesce_mode & (HOSTCC_MODE_CLRTICK_RXBD |
|
|
HOSTCC_MODE_CLRTICK_TXBD)) {
|
|
ec->rx_coalesce_usecs = LOW_RXCOL_TICKS_CLRTCKS;
|
|
ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT_CLRTCKS;
|
|
ec->tx_coalesce_usecs = LOW_TXCOL_TICKS_CLRTCKS;
|
|
ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT_CLRTCKS;
|
|
}
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
|
|
ec->rx_coalesce_usecs_irq = 0;
|
|
ec->tx_coalesce_usecs_irq = 0;
|
|
ec->stats_block_coalesce_usecs = 0;
|
|
}
|
|
}
|
|
|
|
static const struct net_device_ops tg3_netdev_ops = {
|
|
.ndo_open = tg3_open,
|
|
.ndo_stop = tg3_close,
|
|
.ndo_start_xmit = tg3_start_xmit,
|
|
.ndo_get_stats = tg3_get_stats,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_multicast_list = tg3_set_rx_mode,
|
|
.ndo_set_mac_address = tg3_set_mac_addr,
|
|
.ndo_do_ioctl = tg3_ioctl,
|
|
.ndo_tx_timeout = tg3_tx_timeout,
|
|
.ndo_change_mtu = tg3_change_mtu,
|
|
#if TG3_VLAN_TAG_USED
|
|
.ndo_vlan_rx_register = tg3_vlan_rx_register,
|
|
#endif
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = tg3_poll_controller,
|
|
#endif
|
|
};
|
|
|
|
static const struct net_device_ops tg3_netdev_ops_dma_bug = {
|
|
.ndo_open = tg3_open,
|
|
.ndo_stop = tg3_close,
|
|
.ndo_start_xmit = tg3_start_xmit_dma_bug,
|
|
.ndo_get_stats = tg3_get_stats,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_multicast_list = tg3_set_rx_mode,
|
|
.ndo_set_mac_address = tg3_set_mac_addr,
|
|
.ndo_do_ioctl = tg3_ioctl,
|
|
.ndo_tx_timeout = tg3_tx_timeout,
|
|
.ndo_change_mtu = tg3_change_mtu,
|
|
#if TG3_VLAN_TAG_USED
|
|
.ndo_vlan_rx_register = tg3_vlan_rx_register,
|
|
#endif
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = tg3_poll_controller,
|
|
#endif
|
|
};
|
|
|
|
static int __devinit tg3_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static int tg3_version_printed = 0;
|
|
struct net_device *dev;
|
|
struct tg3 *tp;
|
|
int err, pm_cap;
|
|
char str[40];
|
|
u64 dma_mask, persist_dma_mask;
|
|
|
|
if (tg3_version_printed++ == 0)
|
|
printk(KERN_INFO "%s", version);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot enable PCI device, "
|
|
"aborting.\n");
|
|
return err;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_MODULE_NAME);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot obtain PCI resources, "
|
|
"aborting.\n");
|
|
goto err_out_disable_pdev;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* Find power-management capability. */
|
|
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
|
|
if (pm_cap == 0) {
|
|
printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
|
|
"aborting.\n");
|
|
err = -EIO;
|
|
goto err_out_free_res;
|
|
}
|
|
|
|
dev = alloc_etherdev(sizeof(*tp));
|
|
if (!dev) {
|
|
printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
|
|
err = -ENOMEM;
|
|
goto err_out_free_res;
|
|
}
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
#if TG3_VLAN_TAG_USED
|
|
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
|
#endif
|
|
|
|
tp = netdev_priv(dev);
|
|
tp->pdev = pdev;
|
|
tp->dev = dev;
|
|
tp->pm_cap = pm_cap;
|
|
tp->rx_mode = TG3_DEF_RX_MODE;
|
|
tp->tx_mode = TG3_DEF_TX_MODE;
|
|
|
|
if (tg3_debug > 0)
|
|
tp->msg_enable = tg3_debug;
|
|
else
|
|
tp->msg_enable = TG3_DEF_MSG_ENABLE;
|
|
|
|
/* The word/byte swap controls here control register access byte
|
|
* swapping. DMA data byte swapping is controlled in the GRC_MODE
|
|
* setting below.
|
|
*/
|
|
tp->misc_host_ctrl =
|
|
MISC_HOST_CTRL_MASK_PCI_INT |
|
|
MISC_HOST_CTRL_WORD_SWAP |
|
|
MISC_HOST_CTRL_INDIR_ACCESS |
|
|
MISC_HOST_CTRL_PCISTATE_RW;
|
|
|
|
/* The NONFRM (non-frame) byte/word swap controls take effect
|
|
* on descriptor entries, anything which isn't packet data.
|
|
*
|
|
* The StrongARM chips on the board (one for tx, one for rx)
|
|
* are running in big-endian mode.
|
|
*/
|
|
tp->grc_mode = (GRC_MODE_WSWAP_DATA | GRC_MODE_BSWAP_DATA |
|
|
GRC_MODE_WSWAP_NONFRM_DATA);
|
|
#ifdef __BIG_ENDIAN
|
|
tp->grc_mode |= GRC_MODE_BSWAP_NONFRM_DATA;
|
|
#endif
|
|
spin_lock_init(&tp->lock);
|
|
spin_lock_init(&tp->indirect_lock);
|
|
INIT_WORK(&tp->reset_task, tg3_reset_task);
|
|
|
|
tp->regs = pci_ioremap_bar(pdev, BAR_0);
|
|
if (!tp->regs) {
|
|
printk(KERN_ERR PFX "Cannot map device registers, "
|
|
"aborting.\n");
|
|
err = -ENOMEM;
|
|
goto err_out_free_dev;
|
|
}
|
|
|
|
tg3_init_link_config(tp);
|
|
|
|
tp->rx_pending = TG3_DEF_RX_RING_PENDING;
|
|
tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
|
|
tp->tx_pending = TG3_DEF_TX_RING_PENDING;
|
|
|
|
netif_napi_add(dev, &tp->napi, tg3_poll, 64);
|
|
dev->ethtool_ops = &tg3_ethtool_ops;
|
|
dev->watchdog_timeo = TG3_TX_TIMEOUT;
|
|
dev->irq = pdev->irq;
|
|
|
|
err = tg3_get_invariants(tp);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Problem fetching invariants of chip, "
|
|
"aborting.\n");
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
|
|
dev->netdev_ops = &tg3_netdev_ops;
|
|
else
|
|
dev->netdev_ops = &tg3_netdev_ops_dma_bug;
|
|
|
|
|
|
/* The EPB bridge inside 5714, 5715, and 5780 and any
|
|
* device behind the EPB cannot support DMA addresses > 40-bit.
|
|
* On 64-bit systems with IOMMU, use 40-bit dma_mask.
|
|
* On 64-bit systems without IOMMU, use 64-bit dma_mask and
|
|
* do DMA address check in tg3_start_xmit().
|
|
*/
|
|
if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
|
|
persist_dma_mask = dma_mask = DMA_BIT_MASK(32);
|
|
else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
|
|
persist_dma_mask = dma_mask = DMA_BIT_MASK(40);
|
|
#ifdef CONFIG_HIGHMEM
|
|
dma_mask = DMA_BIT_MASK(64);
|
|
#endif
|
|
} else
|
|
persist_dma_mask = dma_mask = DMA_BIT_MASK(64);
|
|
|
|
/* Configure DMA attributes. */
|
|
if (dma_mask > DMA_BIT_MASK(32)) {
|
|
err = pci_set_dma_mask(pdev, dma_mask);
|
|
if (!err) {
|
|
dev->features |= NETIF_F_HIGHDMA;
|
|
err = pci_set_consistent_dma_mask(pdev,
|
|
persist_dma_mask);
|
|
if (err < 0) {
|
|
printk(KERN_ERR PFX "Unable to obtain 64 bit "
|
|
"DMA for consistent allocations\n");
|
|
goto err_out_iounmap;
|
|
}
|
|
}
|
|
}
|
|
if (err || dma_mask == DMA_BIT_MASK(32)) {
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
printk(KERN_ERR PFX "No usable DMA configuration, "
|
|
"aborting.\n");
|
|
goto err_out_iounmap;
|
|
}
|
|
}
|
|
|
|
tg3_init_bufmgr_config(tp);
|
|
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
|
|
tp->fw_needed = FIRMWARE_TG3;
|
|
|
|
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
|
|
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
|
|
}
|
|
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
|
|
tp->pci_chip_rev_id == CHIPREV_ID_5705_A0 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 ||
|
|
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
|
|
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
|
|
} else {
|
|
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
|
|
tp->fw_needed = FIRMWARE_TG3TSO5;
|
|
else
|
|
tp->fw_needed = FIRMWARE_TG3TSO;
|
|
}
|
|
|
|
/* TSO is on by default on chips that support hardware TSO.
|
|
* Firmware TSO on older chips gives lower performance, so it
|
|
* is off by default, but can be enabled using ethtool.
|
|
*/
|
|
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
|
|
if (dev->features & NETIF_F_IP_CSUM)
|
|
dev->features |= NETIF_F_TSO;
|
|
if ((dev->features & NETIF_F_IPV6_CSUM) &&
|
|
(tp->tg3_flags2 & TG3_FLG2_HW_TSO_2))
|
|
dev->features |= NETIF_F_TSO6;
|
|
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
|
|
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
|
|
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
|
|
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
|
|
dev->features |= NETIF_F_TSO_ECN;
|
|
}
|
|
|
|
|
|
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 &&
|
|
!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
|
|
!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) {
|
|
tp->tg3_flags2 |= TG3_FLG2_MAX_RXPEND_64;
|
|
tp->rx_pending = 63;
|
|
}
|
|
|
|
err = tg3_get_device_address(tp);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Could not obtain valid ethernet address, "
|
|
"aborting.\n");
|
|
goto err_out_fw;
|
|
}
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
|
|
tp->aperegs = pci_ioremap_bar(pdev, BAR_2);
|
|
if (!tp->aperegs) {
|
|
printk(KERN_ERR PFX "Cannot map APE registers, "
|
|
"aborting.\n");
|
|
err = -ENOMEM;
|
|
goto err_out_fw;
|
|
}
|
|
|
|
tg3_ape_lock_init(tp);
|
|
|
|
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF)
|
|
tg3_read_dash_ver(tp);
|
|
}
|
|
|
|
/*
|
|
* Reset chip in case UNDI or EFI driver did not shutdown
|
|
* DMA self test will enable WDMAC and we'll see (spurious)
|
|
* pending DMA on the PCI bus at that point.
|
|
*/
|
|
if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) ||
|
|
(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) {
|
|
tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
}
|
|
|
|
err = tg3_test_dma(tp);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
|
|
goto err_out_apeunmap;
|
|
}
|
|
|
|
/* flow control autonegotiation is default behavior */
|
|
tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
|
|
tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
|
|
|
|
tg3_init_coal(tp);
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot register net device, "
|
|
"aborting.\n");
|
|
goto err_out_apeunmap;
|
|
}
|
|
|
|
printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
|
|
dev->name,
|
|
tp->board_part_number,
|
|
tp->pci_chip_rev_id,
|
|
tg3_bus_string(tp, str),
|
|
dev->dev_addr);
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)
|
|
printk(KERN_INFO
|
|
"%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
|
|
tp->dev->name,
|
|
tp->mdio_bus->phy_map[PHY_ADDR]->drv->name,
|
|
dev_name(&tp->mdio_bus->phy_map[PHY_ADDR]->dev));
|
|
else
|
|
printk(KERN_INFO
|
|
"%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
|
|
tp->dev->name, tg3_phy_string(tp),
|
|
((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
|
|
((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
|
|
"10/100/1000Base-T")),
|
|
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
|
|
|
|
printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
|
|
dev->name,
|
|
(tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
|
|
(tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
|
|
(tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
|
|
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
|
|
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
|
|
printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
|
|
dev->name, tp->dma_rwctrl,
|
|
(pdev->dma_mask == DMA_BIT_MASK(32)) ? 32 :
|
|
(((u64) pdev->dma_mask == DMA_BIT_MASK(40)) ? 40 : 64));
|
|
|
|
return 0;
|
|
|
|
err_out_apeunmap:
|
|
if (tp->aperegs) {
|
|
iounmap(tp->aperegs);
|
|
tp->aperegs = NULL;
|
|
}
|
|
|
|
err_out_fw:
|
|
if (tp->fw)
|
|
release_firmware(tp->fw);
|
|
|
|
err_out_iounmap:
|
|
if (tp->regs) {
|
|
iounmap(tp->regs);
|
|
tp->regs = NULL;
|
|
}
|
|
|
|
err_out_free_dev:
|
|
free_netdev(dev);
|
|
|
|
err_out_free_res:
|
|
pci_release_regions(pdev);
|
|
|
|
err_out_disable_pdev:
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
return err;
|
|
}
|
|
|
|
static void __devexit tg3_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
|
|
if (tp->fw)
|
|
release_firmware(tp->fw);
|
|
|
|
flush_scheduled_work();
|
|
|
|
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
|
|
tg3_phy_fini(tp);
|
|
tg3_mdio_fini(tp);
|
|
}
|
|
|
|
unregister_netdev(dev);
|
|
if (tp->aperegs) {
|
|
iounmap(tp->aperegs);
|
|
tp->aperegs = NULL;
|
|
}
|
|
if (tp->regs) {
|
|
iounmap(tp->regs);
|
|
tp->regs = NULL;
|
|
}
|
|
free_netdev(dev);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
}
|
|
|
|
static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
pci_power_t target_state;
|
|
int err;
|
|
|
|
/* PCI register 4 needs to be saved whether netif_running() or not.
|
|
* MSI address and data need to be saved if using MSI and
|
|
* netif_running().
|
|
*/
|
|
pci_save_state(pdev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
flush_scheduled_work();
|
|
tg3_phy_stop(tp);
|
|
tg3_netif_stop(tp);
|
|
|
|
del_timer_sync(&tp->timer);
|
|
|
|
tg3_full_lock(tp, 1);
|
|
tg3_disable_ints(tp);
|
|
tg3_full_unlock(tp);
|
|
|
|
netif_device_detach(dev);
|
|
|
|
tg3_full_lock(tp, 0);
|
|
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
|
tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
|
|
tg3_full_unlock(tp);
|
|
|
|
target_state = pdev->pm_cap ? pci_target_state(pdev) : PCI_D3hot;
|
|
|
|
err = tg3_set_power_state(tp, target_state);
|
|
if (err) {
|
|
int err2;
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
|
|
err2 = tg3_restart_hw(tp, 1);
|
|
if (err2)
|
|
goto out;
|
|
|
|
tp->timer.expires = jiffies + tp->timer_offset;
|
|
add_timer(&tp->timer);
|
|
|
|
netif_device_attach(dev);
|
|
tg3_netif_start(tp);
|
|
|
|
out:
|
|
tg3_full_unlock(tp);
|
|
|
|
if (!err2)
|
|
tg3_phy_start(tp);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tg3_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct tg3 *tp = netdev_priv(dev);
|
|
int err;
|
|
|
|
pci_restore_state(tp->pdev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
err = tg3_set_power_state(tp, PCI_D0);
|
|
if (err)
|
|
return err;
|
|
|
|
netif_device_attach(dev);
|
|
|
|
tg3_full_lock(tp, 0);
|
|
|
|
tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
|
|
err = tg3_restart_hw(tp, 1);
|
|
if (err)
|
|
goto out;
|
|
|
|
tp->timer.expires = jiffies + tp->timer_offset;
|
|
add_timer(&tp->timer);
|
|
|
|
tg3_netif_start(tp);
|
|
|
|
out:
|
|
tg3_full_unlock(tp);
|
|
|
|
if (!err)
|
|
tg3_phy_start(tp);
|
|
|
|
return err;
|
|
}
|
|
|
|
static struct pci_driver tg3_driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
.id_table = tg3_pci_tbl,
|
|
.probe = tg3_init_one,
|
|
.remove = __devexit_p(tg3_remove_one),
|
|
.suspend = tg3_suspend,
|
|
.resume = tg3_resume
|
|
};
|
|
|
|
static int __init tg3_init(void)
|
|
{
|
|
return pci_register_driver(&tg3_driver);
|
|
}
|
|
|
|
static void __exit tg3_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&tg3_driver);
|
|
}
|
|
|
|
module_init(tg3_init);
|
|
module_exit(tg3_cleanup);
|