mirror of
https://github.com/adulau/aha.git
synced 2024-12-30 12:46:17 +00:00
ce973b141d
QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: Shlomi Gridish <gridish@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
801 lines
20 KiB
C
801 lines
20 KiB
C
/*
|
|
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
|
|
*
|
|
* Author: Shlomi Gridish <gridish@freescale.com>
|
|
*
|
|
* Description:
|
|
* UCC GETH Driver -- PHY handling
|
|
*
|
|
* Changelog:
|
|
* Jun 28, 2006 Li Yang <LeoLi@freescale.com>
|
|
* - Rearrange code and style fixes
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "ucc_geth.h"
|
|
#include "ucc_geth_phy.h"
|
|
#include <platforms/83xx/mpc8360e_pb.h>
|
|
|
|
#define ugphy_printk(level, format, arg...) \
|
|
printk(level format "\n", ## arg)
|
|
|
|
#define ugphy_dbg(format, arg...) \
|
|
ugphy_printk(KERN_DEBUG, format , ## arg)
|
|
#define ugphy_err(format, arg...) \
|
|
ugphy_printk(KERN_ERR, format , ## arg)
|
|
#define ugphy_info(format, arg...) \
|
|
ugphy_printk(KERN_INFO, format , ## arg)
|
|
#define ugphy_warn(format, arg...) \
|
|
ugphy_printk(KERN_WARNING, format , ## arg)
|
|
|
|
#ifdef UGETH_VERBOSE_DEBUG
|
|
#define ugphy_vdbg ugphy_dbg
|
|
#else
|
|
#define ugphy_vdbg(fmt, args...) do { } while (0)
|
|
#endif /* UGETH_VERBOSE_DEBUG */
|
|
|
|
static void config_genmii_advert(struct ugeth_mii_info *mii_info);
|
|
static void genmii_setup_forced(struct ugeth_mii_info *mii_info);
|
|
static void genmii_restart_aneg(struct ugeth_mii_info *mii_info);
|
|
static int gbit_config_aneg(struct ugeth_mii_info *mii_info);
|
|
static int genmii_config_aneg(struct ugeth_mii_info *mii_info);
|
|
static int genmii_update_link(struct ugeth_mii_info *mii_info);
|
|
static int genmii_read_status(struct ugeth_mii_info *mii_info);
|
|
u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum);
|
|
void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val);
|
|
|
|
static u8 *bcsr_regs = NULL;
|
|
|
|
/* Write value to the PHY for this device to the register at regnum, */
|
|
/* waiting until the write is done before it returns. All PHY */
|
|
/* configuration has to be done through the TSEC1 MIIM regs */
|
|
void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
|
|
{
|
|
ucc_geth_private_t *ugeth = netdev_priv(dev);
|
|
ucc_mii_mng_t *mii_regs;
|
|
enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
|
|
u32 tmp_reg;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
spin_lock_irq(&ugeth->lock);
|
|
|
|
mii_regs = ugeth->mii_info->mii_regs;
|
|
|
|
/* Set this UCC to be the master of the MII managment */
|
|
ucc_set_qe_mux_mii_mng(ugeth->ug_info->uf_info.ucc_num);
|
|
|
|
/* Stop the MII management read cycle */
|
|
out_be32(&mii_regs->miimcom, 0);
|
|
/* Setting up the MII Mangement Address Register */
|
|
tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
|
|
out_be32(&mii_regs->miimadd, tmp_reg);
|
|
|
|
/* Setting up the MII Mangement Control Register with the value */
|
|
out_be32(&mii_regs->miimcon, (u32) value);
|
|
|
|
/* Wait till MII management write is complete */
|
|
while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY)
|
|
cpu_relax();
|
|
|
|
spin_unlock_irq(&ugeth->lock);
|
|
|
|
udelay(10000);
|
|
}
|
|
|
|
/* Reads from register regnum in the PHY for device dev, */
|
|
/* returning the value. Clears miimcom first. All PHY */
|
|
/* configuration has to be done through the TSEC1 MIIM regs */
|
|
int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
|
|
{
|
|
ucc_geth_private_t *ugeth = netdev_priv(dev);
|
|
ucc_mii_mng_t *mii_regs;
|
|
enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
|
|
u32 tmp_reg;
|
|
u16 value;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
spin_lock_irq(&ugeth->lock);
|
|
|
|
mii_regs = ugeth->mii_info->mii_regs;
|
|
|
|
/* Setting up the MII Mangement Address Register */
|
|
tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
|
|
out_be32(&mii_regs->miimadd, tmp_reg);
|
|
|
|
/* Perform an MII management read cycle */
|
|
out_be32(&mii_regs->miimcom, MIIMCOM_READ_CYCLE);
|
|
|
|
/* Wait till MII management write is complete */
|
|
while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY)
|
|
cpu_relax();
|
|
|
|
udelay(10000);
|
|
|
|
/* Read MII management status */
|
|
value = (u16) in_be32(&mii_regs->miimstat);
|
|
out_be32(&mii_regs->miimcom, 0);
|
|
if (value == 0xffff)
|
|
ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x",
|
|
mii_id, mii_reg, (u32) & (mii_regs->miimcfg));
|
|
|
|
spin_unlock_irq(&ugeth->lock);
|
|
|
|
return (value);
|
|
}
|
|
|
|
void mii_clear_phy_interrupt(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
if (mii_info->phyinfo->ack_interrupt)
|
|
mii_info->phyinfo->ack_interrupt(mii_info);
|
|
}
|
|
|
|
void mii_configure_phy_interrupt(struct ugeth_mii_info *mii_info,
|
|
u32 interrupts)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
mii_info->interrupts = interrupts;
|
|
if (mii_info->phyinfo->config_intr)
|
|
mii_info->phyinfo->config_intr(mii_info);
|
|
}
|
|
|
|
/* Writes MII_ADVERTISE with the appropriate values, after
|
|
* sanitizing advertise to make sure only supported features
|
|
* are advertised
|
|
*/
|
|
static void config_genmii_advert(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u32 advertise;
|
|
u16 adv;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Only allow advertising what this PHY supports */
|
|
mii_info->advertising &= mii_info->phyinfo->features;
|
|
advertise = mii_info->advertising;
|
|
|
|
/* Setup standard advertisement */
|
|
adv = phy_read(mii_info, MII_ADVERTISE);
|
|
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
|
|
if (advertise & ADVERTISED_10baseT_Half)
|
|
adv |= ADVERTISE_10HALF;
|
|
if (advertise & ADVERTISED_10baseT_Full)
|
|
adv |= ADVERTISE_10FULL;
|
|
if (advertise & ADVERTISED_100baseT_Half)
|
|
adv |= ADVERTISE_100HALF;
|
|
if (advertise & ADVERTISED_100baseT_Full)
|
|
adv |= ADVERTISE_100FULL;
|
|
phy_write(mii_info, MII_ADVERTISE, adv);
|
|
}
|
|
|
|
static void genmii_setup_forced(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 ctrl;
|
|
u32 features = mii_info->phyinfo->features;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
ctrl = phy_read(mii_info, MII_BMCR);
|
|
|
|
ctrl &=
|
|
~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
|
|
ctrl |= BMCR_RESET;
|
|
|
|
switch (mii_info->speed) {
|
|
case SPEED_1000:
|
|
if (features & (SUPPORTED_1000baseT_Half
|
|
| SUPPORTED_1000baseT_Full)) {
|
|
ctrl |= BMCR_SPEED1000;
|
|
break;
|
|
}
|
|
mii_info->speed = SPEED_100;
|
|
case SPEED_100:
|
|
if (features & (SUPPORTED_100baseT_Half
|
|
| SUPPORTED_100baseT_Full)) {
|
|
ctrl |= BMCR_SPEED100;
|
|
break;
|
|
}
|
|
mii_info->speed = SPEED_10;
|
|
case SPEED_10:
|
|
if (features & (SUPPORTED_10baseT_Half
|
|
| SUPPORTED_10baseT_Full))
|
|
break;
|
|
default: /* Unsupported speed! */
|
|
ugphy_err("%s: Bad speed!", mii_info->dev->name);
|
|
break;
|
|
}
|
|
|
|
phy_write(mii_info, MII_BMCR, ctrl);
|
|
}
|
|
|
|
/* Enable and Restart Autonegotiation */
|
|
static void genmii_restart_aneg(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 ctl;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
ctl = phy_read(mii_info, MII_BMCR);
|
|
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
|
|
phy_write(mii_info, MII_BMCR, ctl);
|
|
}
|
|
|
|
static int gbit_config_aneg(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 adv;
|
|
u32 advertise;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
if (mii_info->autoneg) {
|
|
/* Configure the ADVERTISE register */
|
|
config_genmii_advert(mii_info);
|
|
advertise = mii_info->advertising;
|
|
|
|
adv = phy_read(mii_info, MII_1000BASETCONTROL);
|
|
adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
|
|
MII_1000BASETCONTROL_HALFDUPLEXCAP);
|
|
if (advertise & SUPPORTED_1000baseT_Half)
|
|
adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
|
|
if (advertise & SUPPORTED_1000baseT_Full)
|
|
adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
|
|
phy_write(mii_info, MII_1000BASETCONTROL, adv);
|
|
|
|
/* Start/Restart aneg */
|
|
genmii_restart_aneg(mii_info);
|
|
} else
|
|
genmii_setup_forced(mii_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int genmii_config_aneg(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
if (mii_info->autoneg) {
|
|
config_genmii_advert(mii_info);
|
|
genmii_restart_aneg(mii_info);
|
|
} else
|
|
genmii_setup_forced(mii_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int genmii_update_link(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 status;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Do a fake read */
|
|
phy_read(mii_info, MII_BMSR);
|
|
|
|
/* Read link and autonegotiation status */
|
|
status = phy_read(mii_info, MII_BMSR);
|
|
if ((status & BMSR_LSTATUS) == 0)
|
|
mii_info->link = 0;
|
|
else
|
|
mii_info->link = 1;
|
|
|
|
/* If we are autonegotiating, and not done,
|
|
* return an error */
|
|
if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
|
|
return -EAGAIN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int genmii_read_status(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 status;
|
|
int err;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Update the link, but return if there
|
|
* was an error */
|
|
err = genmii_update_link(mii_info);
|
|
if (err)
|
|
return err;
|
|
|
|
if (mii_info->autoneg) {
|
|
status = phy_read(mii_info, MII_LPA);
|
|
|
|
if (status & (LPA_10FULL | LPA_100FULL))
|
|
mii_info->duplex = DUPLEX_FULL;
|
|
else
|
|
mii_info->duplex = DUPLEX_HALF;
|
|
if (status & (LPA_100FULL | LPA_100HALF))
|
|
mii_info->speed = SPEED_100;
|
|
else
|
|
mii_info->speed = SPEED_10;
|
|
mii_info->pause = 0;
|
|
}
|
|
/* On non-aneg, we assume what we put in BMCR is the speed,
|
|
* though magic-aneg shouldn't prevent this case from occurring
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int marvell_init(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
phy_write(mii_info, 0x14, 0x0cd2);
|
|
phy_write(mii_info, MII_BMCR,
|
|
phy_read(mii_info, MII_BMCR) | BMCR_RESET);
|
|
msleep(4000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int marvell_config_aneg(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* The Marvell PHY has an errata which requires
|
|
* that certain registers get written in order
|
|
* to restart autonegotiation */
|
|
phy_write(mii_info, MII_BMCR, BMCR_RESET);
|
|
|
|
phy_write(mii_info, 0x1d, 0x1f);
|
|
phy_write(mii_info, 0x1e, 0x200c);
|
|
phy_write(mii_info, 0x1d, 0x5);
|
|
phy_write(mii_info, 0x1e, 0);
|
|
phy_write(mii_info, 0x1e, 0x100);
|
|
|
|
gbit_config_aneg(mii_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int marvell_read_status(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 status;
|
|
int err;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Update the link, but return if there
|
|
* was an error */
|
|
err = genmii_update_link(mii_info);
|
|
if (err)
|
|
return err;
|
|
|
|
/* If the link is up, read the speed and duplex */
|
|
/* If we aren't autonegotiating, assume speeds
|
|
* are as set */
|
|
if (mii_info->autoneg && mii_info->link) {
|
|
int speed;
|
|
status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
|
|
|
|
/* Get the duplexity */
|
|
if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
|
|
mii_info->duplex = DUPLEX_FULL;
|
|
else
|
|
mii_info->duplex = DUPLEX_HALF;
|
|
|
|
/* Get the speed */
|
|
speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
|
|
switch (speed) {
|
|
case MII_M1011_PHY_SPEC_STATUS_1000:
|
|
mii_info->speed = SPEED_1000;
|
|
break;
|
|
case MII_M1011_PHY_SPEC_STATUS_100:
|
|
mii_info->speed = SPEED_100;
|
|
break;
|
|
default:
|
|
mii_info->speed = SPEED_10;
|
|
break;
|
|
}
|
|
mii_info->pause = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int marvell_ack_interrupt(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Clear the interrupts by reading the reg */
|
|
phy_read(mii_info, MII_M1011_IEVENT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int marvell_config_intr(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
|
|
phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
|
|
else
|
|
phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cis820x_init(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
|
|
MII_CIS8201_AUXCONSTAT_INIT);
|
|
phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cis820x_read_status(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 status;
|
|
int err;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Update the link, but return if there
|
|
* was an error */
|
|
err = genmii_update_link(mii_info);
|
|
if (err)
|
|
return err;
|
|
|
|
/* If the link is up, read the speed and duplex */
|
|
/* If we aren't autonegotiating, assume speeds
|
|
* are as set */
|
|
if (mii_info->autoneg && mii_info->link) {
|
|
int speed;
|
|
|
|
status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
|
|
if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
|
|
mii_info->duplex = DUPLEX_FULL;
|
|
else
|
|
mii_info->duplex = DUPLEX_HALF;
|
|
|
|
speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
|
|
|
|
switch (speed) {
|
|
case MII_CIS8201_AUXCONSTAT_GBIT:
|
|
mii_info->speed = SPEED_1000;
|
|
break;
|
|
case MII_CIS8201_AUXCONSTAT_100:
|
|
mii_info->speed = SPEED_100;
|
|
break;
|
|
default:
|
|
mii_info->speed = SPEED_10;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cis820x_ack_interrupt(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
phy_read(mii_info, MII_CIS8201_ISTAT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cis820x_config_intr(struct ugeth_mii_info *mii_info)
|
|
{
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
|
|
phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
|
|
else
|
|
phy_write(mii_info, MII_CIS8201_IMASK, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DM9161_DELAY 10
|
|
|
|
static int dm9161_read_status(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 status;
|
|
int err;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Update the link, but return if there
|
|
* was an error */
|
|
err = genmii_update_link(mii_info);
|
|
if (err)
|
|
return err;
|
|
|
|
/* If the link is up, read the speed and duplex */
|
|
/* If we aren't autonegotiating, assume speeds
|
|
* are as set */
|
|
if (mii_info->autoneg && mii_info->link) {
|
|
status = phy_read(mii_info, MII_DM9161_SCSR);
|
|
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
|
|
mii_info->speed = SPEED_100;
|
|
else
|
|
mii_info->speed = SPEED_10;
|
|
|
|
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
|
|
mii_info->duplex = DUPLEX_FULL;
|
|
else
|
|
mii_info->duplex = DUPLEX_HALF;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm9161_config_aneg(struct ugeth_mii_info *mii_info)
|
|
{
|
|
struct dm9161_private *priv = mii_info->priv;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
if (0 == priv->resetdone)
|
|
return -EAGAIN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dm9161_timer(unsigned long data)
|
|
{
|
|
struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data;
|
|
struct dm9161_private *priv = mii_info->priv;
|
|
u16 status = phy_read(mii_info, MII_BMSR);
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
if (status & BMSR_ANEGCOMPLETE) {
|
|
priv->resetdone = 1;
|
|
} else
|
|
mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
|
|
}
|
|
|
|
static int dm9161_init(struct ugeth_mii_info *mii_info)
|
|
{
|
|
struct dm9161_private *priv;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Allocate the private data structure */
|
|
priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
|
|
|
|
if (NULL == priv)
|
|
return -ENOMEM;
|
|
|
|
mii_info->priv = priv;
|
|
|
|
/* Reset is not done yet */
|
|
priv->resetdone = 0;
|
|
|
|
phy_write(mii_info, MII_BMCR,
|
|
phy_read(mii_info, MII_BMCR) | BMCR_RESET);
|
|
|
|
phy_write(mii_info, MII_BMCR,
|
|
phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE);
|
|
|
|
config_genmii_advert(mii_info);
|
|
/* Start/Restart aneg */
|
|
genmii_config_aneg(mii_info);
|
|
|
|
/* Start a timer for DM9161_DELAY seconds to wait
|
|
* for the PHY to be ready */
|
|
init_timer(&priv->timer);
|
|
priv->timer.function = &dm9161_timer;
|
|
priv->timer.data = (unsigned long)mii_info;
|
|
mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dm9161_close(struct ugeth_mii_info *mii_info)
|
|
{
|
|
struct dm9161_private *priv = mii_info->priv;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
del_timer_sync(&priv->timer);
|
|
kfree(priv);
|
|
}
|
|
|
|
static int dm9161_ack_interrupt(struct ugeth_mii_info *mii_info)
|
|
{
|
|
/* FIXME: This lines are for BUG fixing in the mpc8325.
|
|
Remove this from here when it's fixed */
|
|
if (bcsr_regs == NULL)
|
|
bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
|
|
bcsr_regs[14] |= 0x40;
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Clear the interrupts by reading the reg */
|
|
phy_read(mii_info, MII_DM9161_INTR);
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dm9161_config_intr(struct ugeth_mii_info *mii_info)
|
|
{
|
|
/* FIXME: This lines are for BUG fixing in the mpc8325.
|
|
Remove this from here when it's fixed */
|
|
if (bcsr_regs == NULL) {
|
|
bcsr_regs = (u8 *) ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
|
|
bcsr_regs[14] &= ~0x40;
|
|
}
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
|
|
phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
|
|
else
|
|
phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Cicada 820x */
|
|
static struct phy_info phy_info_cis820x = {
|
|
.phy_id = 0x000fc440,
|
|
.name = "Cicada Cis8204",
|
|
.phy_id_mask = 0x000fffc0,
|
|
.features = MII_GBIT_FEATURES,
|
|
.init = &cis820x_init,
|
|
.config_aneg = &gbit_config_aneg,
|
|
.read_status = &cis820x_read_status,
|
|
.ack_interrupt = &cis820x_ack_interrupt,
|
|
.config_intr = &cis820x_config_intr,
|
|
};
|
|
|
|
static struct phy_info phy_info_dm9161 = {
|
|
.phy_id = 0x0181b880,
|
|
.phy_id_mask = 0x0ffffff0,
|
|
.name = "Davicom DM9161E",
|
|
.init = dm9161_init,
|
|
.config_aneg = dm9161_config_aneg,
|
|
.read_status = dm9161_read_status,
|
|
.close = dm9161_close,
|
|
};
|
|
|
|
static struct phy_info phy_info_dm9161a = {
|
|
.phy_id = 0x0181b8a0,
|
|
.phy_id_mask = 0x0ffffff0,
|
|
.name = "Davicom DM9161A",
|
|
.features = MII_BASIC_FEATURES,
|
|
.init = dm9161_init,
|
|
.config_aneg = dm9161_config_aneg,
|
|
.read_status = dm9161_read_status,
|
|
.ack_interrupt = dm9161_ack_interrupt,
|
|
.config_intr = dm9161_config_intr,
|
|
.close = dm9161_close,
|
|
};
|
|
|
|
static struct phy_info phy_info_marvell = {
|
|
.phy_id = 0x01410c00,
|
|
.phy_id_mask = 0xffffff00,
|
|
.name = "Marvell 88E11x1",
|
|
.features = MII_GBIT_FEATURES,
|
|
.init = &marvell_init,
|
|
.config_aneg = &marvell_config_aneg,
|
|
.read_status = &marvell_read_status,
|
|
.ack_interrupt = &marvell_ack_interrupt,
|
|
.config_intr = &marvell_config_intr,
|
|
};
|
|
|
|
static struct phy_info phy_info_genmii = {
|
|
.phy_id = 0x00000000,
|
|
.phy_id_mask = 0x00000000,
|
|
.name = "Generic MII",
|
|
.features = MII_BASIC_FEATURES,
|
|
.config_aneg = genmii_config_aneg,
|
|
.read_status = genmii_read_status,
|
|
};
|
|
|
|
static struct phy_info *phy_info[] = {
|
|
&phy_info_cis820x,
|
|
&phy_info_marvell,
|
|
&phy_info_dm9161,
|
|
&phy_info_dm9161a,
|
|
&phy_info_genmii,
|
|
NULL
|
|
};
|
|
|
|
u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum)
|
|
{
|
|
u16 retval;
|
|
unsigned long flags;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
spin_lock_irqsave(&mii_info->mdio_lock, flags);
|
|
retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
|
|
spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
|
|
|
|
return retval;
|
|
}
|
|
|
|
void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
spin_lock_irqsave(&mii_info->mdio_lock, flags);
|
|
mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val);
|
|
spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
|
|
}
|
|
|
|
/* Use the PHY ID registers to determine what type of PHY is attached
|
|
* to device dev. return a struct phy_info structure describing that PHY
|
|
*/
|
|
struct phy_info *get_phy_info(struct ugeth_mii_info *mii_info)
|
|
{
|
|
u16 phy_reg;
|
|
u32 phy_ID;
|
|
int i;
|
|
struct phy_info *theInfo = NULL;
|
|
struct net_device *dev = mii_info->dev;
|
|
|
|
ugphy_vdbg("%s: IN", __FUNCTION__);
|
|
|
|
/* Grab the bits from PHYIR1, and put them in the upper half */
|
|
phy_reg = phy_read(mii_info, MII_PHYSID1);
|
|
phy_ID = (phy_reg & 0xffff) << 16;
|
|
|
|
/* Grab the bits from PHYIR2, and put them in the lower half */
|
|
phy_reg = phy_read(mii_info, MII_PHYSID2);
|
|
phy_ID |= (phy_reg & 0xffff);
|
|
|
|
/* loop through all the known PHY types, and find one that */
|
|
/* matches the ID we read from the PHY. */
|
|
for (i = 0; phy_info[i]; i++)
|
|
if (phy_info[i]->phy_id == (phy_ID & phy_info[i]->phy_id_mask)){
|
|
theInfo = phy_info[i];
|
|
break;
|
|
}
|
|
|
|
/* This shouldn't happen, as we have generic PHY support */
|
|
if (theInfo == NULL) {
|
|
ugphy_info("%s: PHY id %x is not supported!", dev->name,
|
|
phy_ID);
|
|
return NULL;
|
|
} else {
|
|
ugphy_info("%s: PHY is %s (%x)", dev->name, theInfo->name,
|
|
phy_ID);
|
|
}
|
|
|
|
return theInfo;
|
|
}
|