aha/include/linux/fsl_devices.h
Anton Vorontsov 364fdbc00f spi_mpc83xx: rework chip selects handling
The main purpose of this patch is to pass 'struct spi_device' to the chip
select handling routines.  This is needed so that we could implement
full-fledged OpenFirmware support for this driver.

While at it, also:
- Replace two {de,activate}_cs routines by single cs_contol().
- Don't duplicate platform data callbacks in mpc83xx_spi struct.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:22 -07:00

121 lines
3.2 KiB
C

/*
* include/linux/fsl_devices.h
*
* Definitions for any platform device related flags or structures for
* Freescale processor devices
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _FSL_DEVICE_H_
#define _FSL_DEVICE_H_
#include <linux/types.h>
#include <linux/phy.h>
/*
* Some conventions on how we handle peripherals on Freescale chips
*
* unique device: a platform_device entry in fsl_plat_devs[] plus
* associated device information in its platform_data structure.
*
* A chip is described by a set of unique devices.
*
* Each sub-arch has its own master list of unique devices and
* enumerates them by enum fsl_devices in a sub-arch specific header
*
* The platform data structure is broken into two parts. The
* first is device specific information that help identify any
* unique features of a peripheral. The second is any
* information that may be defined by the board or how the device
* is connected externally of the chip.
*
* naming conventions:
* - platform data structures: <driver>_platform_data
* - platform data device flags: FSL_<driver>_DEV_<FLAG>
* - platform data board flags: FSL_<driver>_BRD_<FLAG>
*
*/
struct gianfar_platform_data {
/* device specific information */
u32 device_flags;
char bus_id[BUS_ID_SIZE];
phy_interface_t interface;
};
struct gianfar_mdio_data {
/* board specific information */
int irq[32];
};
/* Flags in gianfar_platform_data */
#define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */
#define FSL_GIANFAR_BRD_IS_REDUCED 0x00000002 /* Set if RGMII, RMII */
struct fsl_i2c_platform_data {
/* device specific information */
u32 device_flags;
};
/* Flags related to I2C device features */
#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
#define FSL_I2C_DEV_CLOCK_5200 0x00000002
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
FSL_USB2_DR_DEVICE,
FSL_USB2_DR_OTG,
};
enum fsl_usb2_phy_modes {
FSL_USB2_PHY_NONE,
FSL_USB2_PHY_ULPI,
FSL_USB2_PHY_UTMI,
FSL_USB2_PHY_UTMI_WIDE,
FSL_USB2_PHY_SERIAL,
};
struct fsl_usb2_platform_data {
/* board specific information */
enum fsl_usb2_operating_modes operating_mode;
enum fsl_usb2_phy_modes phy_mode;
unsigned int port_enables;
};
/* Flags in fsl_usb2_mph_platform_data */
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
struct spi_device;
struct fsl_spi_platform_data {
u32 initial_spmode; /* initial SPMODE value */
u16 bus_num;
bool qe_mode;
/* board specific information */
u16 max_chipselect;
void (*cs_control)(struct spi_device *spi, bool on);
u32 sysclk;
};
struct mpc8xx_pcmcia_ops {
void(*hw_ctrl)(int slot, int enable);
int(*voltage_set)(int slot, int vcc, int vpp);
};
/* Returns non-zero if the current suspend operation would
* lead to a deep sleep (i.e. power removed from the core,
* instead of just the clock).
*/
int fsl_deep_sleep(void);
#endif /* _FSL_DEVICE_H_ */