adulau/aha
1
0
Fork 0
mirror of https://github.com/adulau/aha.git synced 2024-12-29 12:16:20 +00:00
Code Issues Projects Releases Packages Wiki Activity
aha/include/asm-generic/vmlinux.lds.h
Tim Abbott 27b1833279 Remove unused support code for refok sections. 
The old refok sections

  .text.init.refok
  .data.init.refok
  .exit.text.refok

have been deprecated since commit
312b1485fb.  After the other patches in
this patch series nothing is put in these sections, so clean things up
by eliminating all the remaining references to them.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-27 19:51:58 -07:00

511 lines
16 KiB
C
Raw Blame History

#include <linux/section-names.h>
#ifndef LOAD_OFFSET
#define LOAD_OFFSET 0
#endif
#ifndef VMLINUX_SYMBOL
#define VMLINUX_SYMBOL(_sym_) _sym_
#endif
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
/* The actual configuration determine if the init/exit sections
* are handled as text/data or they can be discarded (which
* often happens at runtime)
*/
#ifdef CONFIG_HOTPLUG
#define DEV_KEEP(sec) *(.dev##sec)
#define DEV_DISCARD(sec)
#else
#define DEV_KEEP(sec)
#define DEV_DISCARD(sec) *(.dev##sec)
#endif
#ifdef CONFIG_HOTPLUG_CPU
#define CPU_KEEP(sec) *(.cpu##sec)
#define CPU_DISCARD(sec)
#else
#define CPU_KEEP(sec)
#define CPU_DISCARD(sec) *(.cpu##sec)
#endif
#if defined(CONFIG_MEMORY_HOTPLUG)
#define MEM_KEEP(sec) *(.mem##sec)
#define MEM_DISCARD(sec)
#else
#define MEM_KEEP(sec)
#define MEM_DISCARD(sec) *(.mem##sec)
#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
#define MCOUNT_REC() VMLINUX_SYMBOL(__start_mcount_loc) = .; \
*(__mcount_loc) \
VMLINUX_SYMBOL(__stop_mcount_loc) = .;
#else
#define MCOUNT_REC()
#endif
#ifdef CONFIG_TRACE_BRANCH_PROFILING
#define LIKELY_PROFILE() VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \
*(_ftrace_annotated_branch) \
VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .;
#else
#define LIKELY_PROFILE()
#endif
#ifdef CONFIG_PROFILE_ALL_BRANCHES
#define BRANCH_PROFILE() VMLINUX_SYMBOL(__start_branch_profile) = .; \
*(_ftrace_branch) \
VMLINUX_SYMBOL(__stop_branch_profile) = .;
#else
#define BRANCH_PROFILE()
#endif
#ifdef CONFIG_EVENT_TRACER
#define FTRACE_EVENTS() VMLINUX_SYMBOL(__start_ftrace_events) = .; \
*(_ftrace_events) \
VMLINUX_SYMBOL(__stop_ftrace_events) = .;
#else
#define FTRACE_EVENTS()
#endif
#ifdef CONFIG_TRACING
#define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .; \
*(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \
VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .;
#else
#define TRACE_PRINTKS()
#endif
#ifdef CONFIG_FTRACE_SYSCALLS
#define TRACE_SYSCALLS() VMLINUX_SYMBOL(__start_syscalls_metadata) = .; \
*(__syscalls_metadata) \
VMLINUX_SYMBOL(__stop_syscalls_metadata) = .;
#else
#define TRACE_SYSCALLS()
#endif
/* .data section */
#define DATA_DATA \
*(.data) \
*(.ref.data) \
DEV_KEEP(init.data) \
DEV_KEEP(exit.data) \
CPU_KEEP(init.data) \
CPU_KEEP(exit.data) \
MEM_KEEP(init.data) \
MEM_KEEP(exit.data) \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___markers) = .; \
*(__markers) \
VMLINUX_SYMBOL(__stop___markers) = .; \
. = ALIGN(32); \
VMLINUX_SYMBOL(__start___tracepoints) = .; \
*(__tracepoints) \
VMLINUX_SYMBOL(__stop___tracepoints) = .; \
/* implement dynamic printk debug */ \
. = ALIGN(8); \
VMLINUX_SYMBOL(__start___verbose) = .; \
*(__verbose) \
VMLINUX_SYMBOL(__stop___verbose) = .; \
LIKELY_PROFILE() \
BRANCH_PROFILE() \
TRACE_PRINTKS() \
FTRACE_EVENTS() \
TRACE_SYSCALLS()
#define RO_DATA(align) \
. = ALIGN((align)); \
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_rodata) = .; \
*(.rodata) *(.rodata.*) \
*(__vermagic) /* Kernel version magic */ \
*(__markers_strings) /* Markers: strings */ \
*(__tracepoints_strings)/* Tracepoints: strings */ \
} \
\
.rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \
*(.rodata1) \
} \
\
BUG_TABLE \
\
/* PCI quirks */ \
.pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
*(.pci_fixup_early) \
VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
*(.pci_fixup_header) \
VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \
*(.pci_fixup_final) \
VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \
*(.pci_fixup_enable) \
VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
*(.pci_fixup_resume) \
VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \
*(.pci_fixup_resume_early) \
VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \
VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \
*(.pci_fixup_suspend) \
VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \
} \
\
/* Built-in firmware blobs */ \
.builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_builtin_fw) = .; \
*(.builtin_fw) \
VMLINUX_SYMBOL(__end_builtin_fw) = .; \
} \
\
/* RapidIO route ops */ \
.rio_route : AT(ADDR(.rio_route) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_rio_route_ops) = .; \
*(.rio_route_ops) \
VMLINUX_SYMBOL(__end_rio_route_ops) = .; \
} \
\
TRACEDATA \
\
/* Kernel symbol table: Normal symbols */ \
__ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab) = .; \
*(__ksymtab) \
VMLINUX_SYMBOL(__stop___ksymtab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
*(__ksymtab_gpl) \
VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
} \
\
/* Kernel symbol table: Normal unused symbols */ \
__ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \
*(__ksymtab_unused) \
VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \
} \
\
/* Kernel symbol table: GPL-only unused symbols */ \
__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \
*(__ksymtab_unused_gpl) \
VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \
} \
\
/* Kernel symbol table: GPL-future-only symbols */ \
__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \
*(__ksymtab_gpl_future) \
VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \
} \
\
/* Kernel symbol table: Normal symbols */ \
__kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab) = .; \
*(__kcrctab) \
VMLINUX_SYMBOL(__stop___kcrctab) = .; \
} \
\
/* Kernel symbol table: GPL-only symbols */ \
__kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \
*(__kcrctab_gpl) \
VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \
} \
\
/* Kernel symbol table: Normal unused symbols */ \
__kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_unused) = .; \
*(__kcrctab_unused) \
VMLINUX_SYMBOL(__stop___kcrctab_unused) = .; \
} \
\
/* Kernel symbol table: GPL-only unused symbols */ \
__kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \
*(__kcrctab_unused_gpl) \
VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \
} \
\
/* Kernel symbol table: GPL-future-only symbols */ \
__kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \
*(__kcrctab_gpl_future) \
VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \
} \
\
/* Kernel symbol table: strings */ \
__ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
*(__ksymtab_strings) \
} \
\
/* __*init sections */ \
__init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \
*(.ref.rodata) \
MCOUNT_REC() \
DEV_KEEP(init.rodata) \
DEV_KEEP(exit.rodata) \
CPU_KEEP(init.rodata) \
CPU_KEEP(exit.rodata) \
MEM_KEEP(init.rodata) \
MEM_KEEP(exit.rodata) \
} \
\
/* Built-in module parameters. */ \
__param : AT(ADDR(__param) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___param) = .; \
*(__param) \
VMLINUX_SYMBOL(__stop___param) = .; \
. = ALIGN((align)); \
VMLINUX_SYMBOL(__end_rodata) = .; \
} \
. = ALIGN((align));
/* RODATA provided for backward compatibility.
* All archs are supposed to use RO_DATA() */
#define RODATA RO_DATA(4096)
#define SECURITY_INIT \
.security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__security_initcall_start) = .; \
*(.security_initcall.init) \
VMLINUX_SYMBOL(__security_initcall_end) = .; \
}
/* .text section. Map to function alignment to avoid address changes
* during second ld run in second ld pass when generating System.map */
#define TEXT_TEXT \
ALIGN_FUNCTION(); \
*(.text.hot) \
*(.text) \
*(.ref.text) \
DEV_KEEP(init.text) \
DEV_KEEP(exit.text) \
CPU_KEEP(init.text) \
CPU_KEEP(exit.text) \
MEM_KEEP(init.text) \
MEM_KEEP(exit.text) \
*(.text.unlikely)
/* sched.text is aling to function alignment to secure we have same
* address even at second ld pass when generating System.map */
#define SCHED_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__sched_text_start) = .; \
*(.sched.text) \
VMLINUX_SYMBOL(__sched_text_end) = .;
/* spinlock.text is aling to function alignment to secure we have same
* address even at second ld pass when generating System.map */
#define LOCK_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__lock_text_start) = .; \
*(.spinlock.text) \
VMLINUX_SYMBOL(__lock_text_end) = .;
#define KPROBES_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__kprobes_text_start) = .; \
*(.kprobes.text) \
VMLINUX_SYMBOL(__kprobes_text_end) = .;
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#define IRQENTRY_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__irqentry_text_start) = .; \
*(.irqentry.text) \
VMLINUX_SYMBOL(__irqentry_text_end) = .;
#else
#define IRQENTRY_TEXT
#endif
/* Section used for early init (in .S files) */
#define HEAD_TEXT *(HEAD_TEXT_SECTION)
/* init and exit section handling */
#define INIT_DATA \
*(.init.data) \
DEV_DISCARD(init.data) \
DEV_DISCARD(init.rodata) \
CPU_DISCARD(init.data) \
CPU_DISCARD(init.rodata) \
MEM_DISCARD(init.data) \
MEM_DISCARD(init.rodata)
#define INIT_TEXT \
*(.init.text) \
DEV_DISCARD(init.text) \
CPU_DISCARD(init.text) \
MEM_DISCARD(init.text)
#define EXIT_DATA \
*(.exit.data) \
DEV_DISCARD(exit.data) \
DEV_DISCARD(exit.rodata) \
CPU_DISCARD(exit.data) \
CPU_DISCARD(exit.rodata) \
MEM_DISCARD(exit.data) \
MEM_DISCARD(exit.rodata)
#define EXIT_TEXT \
*(.exit.text) \
DEV_DISCARD(exit.text) \
CPU_DISCARD(exit.text) \
MEM_DISCARD(exit.text)
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to
the beginning of the section so we begin them at 0. */
#define DWARF_DEBUG \
/* DWARF 1 */ \
.debug 0 : { *(.debug) } \
.line 0 : { *(.line) } \
/* GNU DWARF 1 extensions */ \
.debug_srcinfo 0 : { *(.debug_srcinfo) } \
.debug_sfnames 0 : { *(.debug_sfnames) } \
/* DWARF 1.1 and DWARF 2 */ \
.debug_aranges 0 : { *(.debug_aranges) } \
.debug_pubnames 0 : { *(.debug_pubnames) } \
/* DWARF 2 */ \
.debug_info 0 : { *(.debug_info \
.gnu.linkonce.wi.*) } \
.debug_abbrev 0 : { *(.debug_abbrev) } \
.debug_line 0 : { *(.debug_line) } \
.debug_frame 0 : { *(.debug_frame) } \
.debug_str 0 : { *(.debug_str) } \
.debug_loc 0 : { *(.debug_loc) } \
.debug_macinfo 0 : { *(.debug_macinfo) } \
/* SGI/MIPS DWARF 2 extensions */ \
.debug_weaknames 0 : { *(.debug_weaknames) } \
.debug_funcnames 0 : { *(.debug_funcnames) } \
.debug_typenames 0 : { *(.debug_typenames) } \
.debug_varnames 0 : { *(.debug_varnames) } \
/* Stabs debugging sections. */
#define STABS_DEBUG \
.stab 0 : { *(.stab) } \
.stabstr 0 : { *(.stabstr) } \
.stab.excl 0 : { *(.stab.excl) } \
.stab.exclstr 0 : { *(.stab.exclstr) } \
.stab.index 0 : { *(.stab.index) } \
.stab.indexstr 0 : { *(.stab.indexstr) } \
.comment 0 : { *(.comment) }
#ifdef CONFIG_GENERIC_BUG
#define BUG_TABLE \
. = ALIGN(8); \
__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start___bug_table) = .; \
*(__bug_table) \
VMLINUX_SYMBOL(__stop___bug_table) = .; \
}
#else
#define BUG_TABLE
#endif
#ifdef CONFIG_PM_TRACE
#define TRACEDATA \
. = ALIGN(4); \
.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__tracedata_start) = .; \
*(.tracedata) \
VMLINUX_SYMBOL(__tracedata_end) = .; \
}
#else
#define TRACEDATA
#endif
#define NOTES \
.notes : AT(ADDR(.notes) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_notes) = .; \
*(.note.*) \
VMLINUX_SYMBOL(__stop_notes) = .; \
}
#define INITCALLS \
*(.initcallearly.init) \
VMLINUX_SYMBOL(__early_initcall_end) = .; \
*(.initcall0.init) \
*(.initcall0s.init) \
*(.initcall1.init) \
*(.initcall1s.init) \
*(.initcall2.init) \
*(.initcall2s.init) \
*(.initcall3.init) \
*(.initcall3s.init) \
*(.initcall4.init) \
*(.initcall4s.init) \
*(.initcall5.init) \
*(.initcall5s.init) \
*(.initcallrootfs.init) \
*(.initcall6.init) \
*(.initcall6s.init) \
*(.initcall7.init) \
*(.initcall7s.init)
/**
* PERCPU_VADDR - define output section for percpu area
* @vaddr: explicit base address (optional)
* @phdr: destination PHDR (optional)
*
* Macro which expands to output section for percpu area. If @vaddr
* is not blank, it specifies explicit base address and all percpu
* symbols will be offset from the given address. If blank, @vaddr
* always equals @laddr + LOAD_OFFSET.
*
* @phdr defines the output PHDR to use if not blank. Be warned that
* output PHDR is sticky. If @phdr is specified, the next output
* section in the linker script will go there too. @phdr should have
* a leading colon.
*
* Note that this macros defines __per_cpu_load as an absolute symbol.
* If there is no need to put the percpu section at a predetermined
* address, use PERCPU().
*/
#define PERCPU_VADDR(vaddr, phdr) \
VMLINUX_SYMBOL(__per_cpu_load) = .; \
.data.percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load) \
- LOAD_OFFSET) { \
VMLINUX_SYMBOL(__per_cpu_start) = .; \
*(.data.percpu.first) \
*(.data.percpu.page_aligned) \
*(.data.percpu) \
*(.data.percpu.shared_aligned) \
VMLINUX_SYMBOL(__per_cpu_end) = .; \
} phdr \
. = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data.percpu);
/**
* PERCPU - define output section for percpu area, simple version
* @align: required alignment
*
* Align to @align and outputs output section for percpu area. This
* macro doesn't maniuplate @vaddr or @phdr and __per_cpu_load and
* __per_cpu_start will be identical.
*
* This macro is equivalent to ALIGN(align); PERCPU_VADDR( , ) except
* that __per_cpu_load is defined as a relative symbol against
* .data.percpu which is required for relocatable x86_32
* configuration.
*/
#define PERCPU(align) \
. = ALIGN(align); \
.data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__per_cpu_load) = .; \
VMLINUX_SYMBOL(__per_cpu_start) = .; \
*(.data.percpu.first) \
*(.data.percpu.page_aligned) \
*(.data.percpu) \
*(.data.percpu.shared_aligned) \
VMLINUX_SYMBOL(__per_cpu_end) = .; \
}
Reference in a new issue View git blame Copy permalink