aha/arch/avr32/mach-at32ap/include/mach/smc.h
Haavard Skinnemoen 964d219b6a avr32: Introduce arch/avr32/mach-*/include/mach
Add arch/avr32/mach-*/include to include search path and copy all the
files from include/asm/arch there. The old files will be removed once
ARM does the same change and all common drivers are converted.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-05 13:49:09 +02:00

113 lines
2.4 KiB
C

/*
* Static Memory Controller for AT32 chips
*
* Copyright (C) 2006 Atmel Corporation
*
* Inspired by the OMAP2 General-Purpose Memory Controller interface
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_AT32AP_SMC_H
#define __ARCH_AT32AP_SMC_H
/*
* All timing parameters are in nanoseconds.
*/
struct smc_timing {
/* Delay from address valid to assertion of given strobe */
int ncs_read_setup;
int nrd_setup;
int ncs_write_setup;
int nwe_setup;
/* Pulse length of given strobe */
int ncs_read_pulse;
int nrd_pulse;
int ncs_write_pulse;
int nwe_pulse;
/* Total cycle length of given operation */
int read_cycle;
int write_cycle;
/* Minimal recovery times, will extend cycle if needed */
int ncs_read_recover;
int nrd_recover;
int ncs_write_recover;
int nwe_recover;
};
/*
* All timing parameters are in clock cycles.
*/
struct smc_config {
/* Delay from address valid to assertion of given strobe */
u8 ncs_read_setup;
u8 nrd_setup;
u8 ncs_write_setup;
u8 nwe_setup;
/* Pulse length of given strobe */
u8 ncs_read_pulse;
u8 nrd_pulse;
u8 ncs_write_pulse;
u8 nwe_pulse;
/* Total cycle length of given operation */
u8 read_cycle;
u8 write_cycle;
/* Bus width in bytes */
u8 bus_width;
/*
* 0: Data is sampled on rising edge of NCS
* 1: Data is sampled on rising edge of NRD
*/
unsigned int nrd_controlled:1;
/*
* 0: Data is driven on falling edge of NCS
* 1: Data is driven on falling edge of NWR
*/
unsigned int nwe_controlled:1;
/*
* 0: NWAIT is disabled
* 1: Reserved
* 2: NWAIT is frozen mode
* 3: NWAIT in ready mode
*/
unsigned int nwait_mode:2;
/*
* 0: Byte select access type
* 1: Byte write access type
*/
unsigned int byte_write:1;
/*
* Number of clock cycles before data is released after
* the rising edge of the read controlling signal
*
* Total cycles from SMC is tdf_cycles + 1
*/
unsigned int tdf_cycles:4;
/*
* 0: TDF optimization disabled
* 1: TDF optimization enabled
*/
unsigned int tdf_mode:1;
};
extern void smc_set_timing(struct smc_config *config,
const struct smc_timing *timing);
extern int smc_set_configuration(int cs, const struct smc_config *config);
extern struct smc_config *smc_get_configuration(int cs);
#endif /* __ARCH_AT32AP_SMC_H */