aha/drivers/video/backlight/ltv350qv.h
Haavard Skinnemoen 18f65c793a backlight: Add Samsung LTV350QV LCD driver
This patch adds support for powering on and off the Samsung LTV350QV LCD
panel via SPI.  The driver responds to framebuffer power management, it
powers off the panel on reboot/halt/poweroff.  It can also be controlled
through sysfs.  The panel is powered up when the module is loaded, and off
when the module is unloaded.  Verified on AVR32 STK1000.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:12 +01:00

95 lines
3.1 KiB
C

/*
* Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
*
* Copyright (C) 2006, 2007 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LTV350QV_H
#define __LTV350QV_H
#define LTV_OPC_INDEX 0x74
#define LTV_OPC_DATA 0x76
#define LTV_ID 0x00 /* ID Read */
#define LTV_IFCTL 0x01 /* Display Interface Control */
#define LTV_DATACTL 0x02 /* Display Data Control */
#define LTV_ENTRY_MODE 0x03 /* Entry Mode */
#define LTV_GATECTL1 0x04 /* Gate Control 1 */
#define LTV_GATECTL2 0x05 /* Gate Control 2 */
#define LTV_VBP 0x06 /* Vertical Back Porch */
#define LTV_HBP 0x07 /* Horizontal Back Porch */
#define LTV_SOTCTL 0x08 /* Source Output Timing Control */
#define LTV_PWRCTL1 0x09 /* Power Control 1 */
#define LTV_PWRCTL2 0x0a /* Power Control 2 */
#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
/* Bit definitions for LTV_IFCTL */
#define LTV_IM (1 << 15)
#define LTV_NMD (1 << 14)
#define LTV_SSMD (1 << 13)
#define LTV_REV (1 << 7)
#define LTV_NL(x) (((x) & 0x001f) << 0)
/* Bit definitions for LTV_DATACTL */
#define LTV_DS_SAME (0 << 12)
#define LTV_DS_D_TO_S (1 << 12)
#define LTV_DS_S_TO_D (2 << 12)
#define LTV_CHS_384 (0 << 9)
#define LTV_CHS_480 (1 << 9)
#define LTV_CHS_492 (2 << 9)
#define LTV_DF_RGB (0 << 6)
#define LTV_DF_RGBX (1 << 6)
#define LTV_DF_XRGB (2 << 6)
#define LTV_RGB_RGB (0 << 2)
#define LTV_RGB_BGR (1 << 2)
#define LTV_RGB_GRB (2 << 2)
#define LTV_RGB_RBG (3 << 2)
/* Bit definitions for LTV_ENTRY_MODE */
#define LTV_VSPL_ACTIVE_LOW (0 << 15)
#define LTV_VSPL_ACTIVE_HIGH (1 << 15)
#define LTV_HSPL_ACTIVE_LOW (0 << 14)
#define LTV_HSPL_ACTIVE_HIGH (1 << 14)
#define LTV_DPL_SAMPLE_RISING (0 << 13)
#define LTV_DPL_SAMPLE_FALLING (1 << 13)
#define LTV_EPL_ACTIVE_LOW (0 << 12)
#define LTV_EPL_ACTIVE_HIGH (1 << 12)
#define LTV_SS_LEFT_TO_RIGHT (0 << 8)
#define LTV_SS_RIGHT_TO_LEFT (1 << 8)
#define LTV_STB (1 << 1)
/* Bit definitions for LTV_GATECTL1 */
#define LTV_CLW(x) (((x) & 0x0007) << 12)
#define LTV_GAON (1 << 5)
#define LTV_SDR (1 << 3)
/* Bit definitions for LTV_GATECTL2 */
#define LTV_NW_INV_FRAME (0 << 14)
#define LTV_NW_INV_1LINE (1 << 14)
#define LTV_NW_INV_2LINE (2 << 14)
#define LTV_DSC (1 << 12)
#define LTV_GIF (1 << 8)
#define LTV_FHN (1 << 7)
#define LTV_FTI(x) (((x) & 0x0003) << 4)
#define LTV_FWI(x) (((x) & 0x0003) << 0)
/* Bit definitions for LTV_SOTCTL */
#define LTV_SDT(x) (((x) & 0x0007) << 10)
#define LTV_EQ(x) (((x) & 0x0007) << 2)
/* Bit definitions for LTV_PWRCTL1 */
#define LTV_VCOM_DISABLE (1 << 14)
#define LTV_VCOMOUT_ENABLE (1 << 11)
#define LTV_POWER_ON (1 << 9)
#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
/* Bit definitions for LTV_PWRCTL2 */
#define LTV_VCOML_ENABLE (1 << 13)
#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
#endif /* __LTV350QV_H */