aha/drivers/input/mouse/lifebook.c
Dmitry Torokhov 9961e25976 Input: psmouse - remove identification strings from DMI tables
The driver does not reference identification strings in DMI tables and
since these strings are no longer required by DMI core we can safely
remove them and save some memory.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-04 22:14:43 -08:00

347 lines
8.1 KiB
C

/*
* Fujitsu B-series Lifebook PS/2 TouchScreen driver
*
* Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Kenan Esau <kenan.esau@conan.de>
*
* TouchScreen detection, absolute mode setting and packet layout is taken from
* Harald Hoyer's description of the device.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
#include <linux/dmi.h>
#include "psmouse.h"
#include "lifebook.h"
struct lifebook_data {
struct input_dev *dev2; /* Relative device */
char phys[32];
};
static bool lifebook_present;
static const char *desired_serio_phys;
static int lifebook_limit_serio3(const struct dmi_system_id *d)
{
desired_serio_phys = "isa0060/serio3";
return 0;
}
static bool lifebook_use_6byte_proto;
static int lifebook_set_6byte_proto(const struct dmi_system_id *d)
{
lifebook_use_6byte_proto = true;
return 0;
}
static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* FLORA-ie 55mi */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"),
},
},
{
/* LifeBook B */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
},
},
{
/* Lifebook B */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
},
},
{
/* Lifebook B-2130 */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
},
},
{
/* Lifebook B213x/B2150 */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
},
},
{
/* Zephyr */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
},
},
{
/* Panasonic CF-18 */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
},
.callback = lifebook_limit_serio3,
},
{
/* Panasonic CF-28 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
DMI_MATCH(DMI_PRODUCT_NAME, "CF-28"),
},
.callback = lifebook_set_6byte_proto,
},
{
/* Panasonic CF-29 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
},
.callback = lifebook_set_6byte_proto,
},
{
/* Panasonic CF-72 */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "CF-72"),
},
.callback = lifebook_set_6byte_proto,
},
{
/* Lifebook B142 */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
},
},
{ }
#endif
};
void __init lifebook_module_init(void)
{
lifebook_present = dmi_check_system(lifebook_dmi_table);
}
static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse)
{
struct lifebook_data *priv = psmouse->private;
struct input_dev *dev1 = psmouse->dev;
struct input_dev *dev2 = priv ? priv->dev2 : NULL;
unsigned char *packet = psmouse->packet;
bool relative_packet = packet[0] & 0x08;
if (relative_packet || !lifebook_use_6byte_proto) {
if (psmouse->pktcnt != 3)
return PSMOUSE_GOOD_DATA;
} else {
switch (psmouse->pktcnt) {
case 1:
return (packet[0] & 0xf8) == 0x00 ?
PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA;
case 2:
return PSMOUSE_GOOD_DATA;
case 3:
return ((packet[2] & 0x30) << 2) == (packet[2] & 0xc0) ?
PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA;
case 4:
return (packet[3] & 0xf8) == 0xc0 ?
PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA;
case 5:
return (packet[4] & 0xc0) == (packet[2] & 0xc0) ?
PSMOUSE_GOOD_DATA : PSMOUSE_BAD_DATA;
case 6:
if (((packet[5] & 0x30) << 2) != (packet[5] & 0xc0))
return PSMOUSE_BAD_DATA;
if ((packet[5] & 0xc0) != (packet[1] & 0xc0))
return PSMOUSE_BAD_DATA;
break; /* report data */
}
}
if (relative_packet) {
if (!dev2)
printk(KERN_WARNING "lifebook.c: got relative packet "
"but no relative device set up\n");
} else {
if (lifebook_use_6byte_proto) {
input_report_abs(dev1, ABS_X,
((packet[1] & 0x3f) << 6) | (packet[2] & 0x3f));
input_report_abs(dev1, ABS_Y,
4096 - (((packet[4] & 0x3f) << 6) | (packet[5] & 0x3f)));
} else {
input_report_abs(dev1, ABS_X,
(packet[1] | ((packet[0] & 0x30) << 4)));
input_report_abs(dev1, ABS_Y,
1024 - (packet[2] | ((packet[0] & 0xC0) << 2)));
}
input_report_key(dev1, BTN_TOUCH, packet[0] & 0x04);
input_sync(dev1);
}
if (dev2) {
if (relative_packet) {
input_report_rel(dev2, REL_X,
((packet[0] & 0x10) ? packet[1] - 256 : packet[1]));
input_report_rel(dev2, REL_Y,
-(int)((packet[0] & 0x20) ? packet[2] - 256 : packet[2]));
}
input_report_key(dev2, BTN_LEFT, packet[0] & 0x01);
input_report_key(dev2, BTN_RIGHT, packet[0] & 0x02);
input_sync(dev2);
}
return PSMOUSE_FULL_PACKET;
}
static int lifebook_absolute_mode(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param;
if (psmouse_reset(psmouse))
return -1;
/*
* Enable absolute output -- ps2_command fails always but if
* you leave this call out the touchsreen will never send
* absolute coordinates
*/
param = lifebook_use_6byte_proto ? 0x08 : 0x07;
ps2_command(ps2dev, &param, PSMOUSE_CMD_SETRES);
return 0;
}
static void lifebook_relative_mode(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char param = 0x06;
ps2_command(ps2dev, &param, PSMOUSE_CMD_SETRES);
}
static void lifebook_set_resolution(struct psmouse *psmouse, unsigned int resolution)
{
static const unsigned char params[] = { 0, 1, 2, 2, 3 };
unsigned char p;
if (resolution == 0 || resolution > 400)
resolution = 400;
p = params[resolution / 100];
ps2_command(&psmouse->ps2dev, &p, PSMOUSE_CMD_SETRES);
psmouse->resolution = 50 << p;
}
static void lifebook_disconnect(struct psmouse *psmouse)
{
struct lifebook_data *priv = psmouse->private;
psmouse_reset(psmouse);
if (priv) {
input_unregister_device(priv->dev2);
kfree(priv);
}
psmouse->private = NULL;
}
int lifebook_detect(struct psmouse *psmouse, bool set_properties)
{
if (!lifebook_present)
return -1;
if (desired_serio_phys &&
strcmp(psmouse->ps2dev.serio->phys, desired_serio_phys))
return -1;
if (set_properties) {
psmouse->vendor = "Fujitsu";
psmouse->name = "Lifebook TouchScreen";
}
return 0;
}
static int lifebook_create_relative_device(struct psmouse *psmouse)
{
struct input_dev *dev2;
struct lifebook_data *priv;
int error = -ENOMEM;
priv = kzalloc(sizeof(struct lifebook_data), GFP_KERNEL);
dev2 = input_allocate_device();
if (!priv || !dev2)
goto err_out;
priv->dev2 = dev2;
snprintf(priv->phys, sizeof(priv->phys),
"%s/input1", psmouse->ps2dev.serio->phys);
dev2->phys = priv->phys;
dev2->name = "PS/2 Touchpad";
dev2->id.bustype = BUS_I8042;
dev2->id.vendor = 0x0002;
dev2->id.product = PSMOUSE_LIFEBOOK;
dev2->id.version = 0x0000;
dev2->dev.parent = &psmouse->ps2dev.serio->dev;
dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
dev2->keybit[BIT_WORD(BTN_LEFT)] =
BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
error = input_register_device(priv->dev2);
if (error)
goto err_out;
psmouse->private = priv;
return 0;
err_out:
input_free_device(dev2);
kfree(priv);
return error;
}
int lifebook_init(struct psmouse *psmouse)
{
struct input_dev *dev1 = psmouse->dev;
int max_coord = lifebook_use_6byte_proto ? 4096 : 1024;
if (lifebook_absolute_mode(psmouse))
return -1;
dev1->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
dev1->relbit[0] = 0;
dev1->keybit[BIT_WORD(BTN_MOUSE)] = 0;
dev1->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(dev1, ABS_X, 0, max_coord, 0, 0);
input_set_abs_params(dev1, ABS_Y, 0, max_coord, 0, 0);
if (!desired_serio_phys) {
if (lifebook_create_relative_device(psmouse)) {
lifebook_relative_mode(psmouse);
return -1;
}
}
psmouse->protocol_handler = lifebook_process_byte;
psmouse->set_resolution = lifebook_set_resolution;
psmouse->disconnect = lifebook_disconnect;
psmouse->reconnect = lifebook_absolute_mode;
psmouse->model = lifebook_use_6byte_proto ? 6 : 3;
/*
* Use packet size = 3 even when using 6-byte protocol because
* that's what POLL will return on Lifebooks (according to spec).
*/
psmouse->pktsize = 3;
return 0;
}