The write_event() function in builtin-record.c writes out all
mmap()'d DSOs including non-ELF files like GNOME resource files
and such.
Therefore, check for ELF_K_ELF in filename__read_build_id()
before attempting to read the ELF header with gelf_getehdr().
Fixes the following error messages when running "perf kmem
record":
penberg@penberg-laptop:~/src/linux/tools/perf$ perf kmem record
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.753 MB perf.data (~32885 samples) ]
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
filename__read_build_id: cannot get elf header.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1258885784-11709-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds support for "--sort hit" and "--sort frag" to
the "perf kmem" tool. The former was already mentioned in the
help text and the latter is useful for finding call-sites that
exhibit worst case behavior for SLAB allocators.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <1258883880-7149-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It better propagate errors, also if we do a simple:
[root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ;
perf trace [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ]
Fatal: not an trace data file
[root@doppio linux-2.6-tip]#
That is what is expected, right? I.e. as we didn't specify any
tracepoint event via -e, it should gracefully bail out and not
SEGFAULT.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-3-git-send-email-acme@infradead.org>
[ Fixed the error messages some more ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We better call this routine after both the kernel and modules
are loaded, because as it was if there weren't modules it would not
be called, resulting in kernel_map->end remaining at zero, so no
map would be found and consequently the kernel symtab wouldn't
get loaded, i.e. no kernel symbols would be resolved.
Also this fixes another case, that is when we _have_ modules,
but the last map would have its ->end address not set before we
loaded its symbols, which would never happen because ->end was
not set.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that the user have a clearer indication about the source of
the symbols, as we only state buildid mismatches in verbose
mode, because 'perf top' would overwrite such warning anyway.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
E.g.:
[root@doppio linux-2.6-tip]# perf top -v --vmlinux
../build/tip/vmlinux > /dev/null build_id in vmlinux is
e96699725a47413a50c231864a8e7a8ced40a31b while expected is
18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a, ignoring it
I.e. perf top was told to use a vmlinux file that is not the one
currently running on the machine, it ignores it and falls back
to using /proc/kallsyms.
This solves many, at first, mysterious results when people have
a stale vmlinux file while keeping the default of trying to use
the vmlinux file in the current directory in things like 'perf
annotate' where the DWARF info is required and thus we can't use
just /proc/kallsyms.
Modules buildids are already being checked as of the previous
changeset in this series, because we are using the default
dso__load routine, that will look at a series of places looking
for the best file with a matching buildid, starting in the
-debuginfo directories.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Just like we do with the other DSOs. This also simplifies the
kernel_maps setup process, now all that the tools need to do is
to call kernel_maps__init and the maps for the modules and
kernel will be created, then, later, when
kernel_maps__find_symbol() is used, it will also call
maps__find_symbol that already checks if the symtab was loaded,
loading it if needed.
Now if one does 'perf top --hide_kernel_symbols' we won't pay
the price of loading the (many) symbols in /proc/kallsyms or
vmlinux.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Will be used in more places.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the kernel we have more than one notes section, so the linker
script combines all and puts them into a ".notes" combined
section. So we need to look at both sections and also traverse
them looking at multiple GElf_Nhdr entries till we find the one
we want, with the build_id.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It should just load kernel symbols, not load the list of
modules. There are more stuff to move to other routines, but
lets do it in several steps.
End goal is to be able to defer symbol table loading till we
find a hit for that map address range. So that the kernel &
modules are handled just like all the other DSOs in the system.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the error, that, interestingly, are already handled by
all callers :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This time in perf_header__adds_write, propagating the do_write
error returns.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And also don't call the constructor in it, this way it adheres
to the model the other methods follow.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[root@doppio linux-2.6-tip]# perf record -a -f sleep 3s ; perf
buildid-list | grep vmlinux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.171 MB perf.data (~7489
samples) ] 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a vmlinux
[root@doppio linux-2.6-tip]#
Several refactorings were needed so that we can have symmetry
between dsos__load_modules() and dsos__load_kernel(), i.e. those
functions will respectively create and add to the dsos list the
loaded modules and kernel, with its buildids, but not load its
symbols. That is something the subcomands that need will have to
call dso__load_kernel_sym(), just like we do with modules with
dsos__load_module_sym()/dso__load_module_sym().
Next csets will actually use this info to stop producing bogus
results using mismatched vmlinux and .ko files.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
No need for this struct and its allocations, we can just use the
->build_id member we already have in struct dso, then ask for it
to be read, and later traverse the dsos list, writing the
buildid table to the perf.data file.
As a bonus, one more die() function got killed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we read the build_id from the DSO name to then index into
/usr/lib/debug/.buildid/DSO_BUILD_ID[0:2]/DSO_BUILD_ID[2:], we
were jumping directly to the comparision with the buildid we
already have in dso->build_id (that came from the perf.data
build_id section, collected at perf record time)
unconditionally, even if we didn't had recorded it, and
furthermore, comparing a formatted buildid with a rawbuildid, yikes.
Fix it by deleting the dso__read_build_id() function, that was
really misdesigned anyway, and do the necessary checks and
correct comparison of raw buildids.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Defer to parse_source() time allocating it.
Now we use about this much memory:
1724 root 20 0 42104 10m 940 S 0.0 0.4 0:00.23 perf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258490282-1821-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We pre-calculate the symbol name length, then after we sort the
entries to print, calculate the biggest one and use that for the
symbol name width justification, then use the
dso->long_name->len to justificate the DSO name, deciding whether
using the short or long name depending on how much space we have
on the terminal.
IOW give as much info to the user as the terminal width allows.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258479655-28662-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using a two bytes hole we already had and since we also need to
calculate this strlen for fetching the buildids. We'll use it in
'perf top' to auto-adjust the output based on the terminal
width.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258479655-28662-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Compiler on ia64 rejects the "-m64" option.
Add arch specific pieces to perf.h
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4b02d7f43514327a@agluck-desktop.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This makes it possible to build perf statically, by
performing:
make LDFLAGS=-static
Since static libraries are only searched in the order they are
specified, move library list from LDFLAGS to EXTLIBS, so that
they are put at the end of linker command line.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091029152002.GA5406@redhat.com>
[ v2: resolved conflicts ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Propagate the errors instead, the users are the ones to decide
what to do if a library call fails.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258427892-16312-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Porcelain can ignore it, humans can make more sense of it.
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258415125-15019-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Default continues to be showing all symbols. 'K' and 'U' can be
used to toggle showing kernel and user symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258415125-15019-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
By querying the current number of rows, if the user specifies
the number of entries, use that instead. If the user uses the
'e' command to change the number of lines 0 will mean do it
automatically, any other number disables the auto resizing.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258407027-384-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We really should propagate such kinds of errors so that users of
these library functions decide what to do in such cases instead
of exiting in random places like now.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258407027-384-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With this we can list the buildids in a perf.data file so that
we can pipe them to other, distro specific tools that from the
buildids can figure out separate packages (foo-debuginfo) where
we can find the matching symtabs so that perf report can do its
job.
E.g:
[acme@doppio linux-2.6-tip]$ perf buildid-list | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869
520c2387a587cc5acfcf881e27dba1caaeab4b1f
ec8dd400904ddfcac8b1c343263a790f977159dc
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f
379bb828fd08859dbea73279f04abefabc95a6a3
[acme@doppio linux-2.6-tip]$ perf buildid-list -v | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869 /sbin/init
520c2387a587cc5acfcf881e27dba1caaeab4b1f /lib64/ld-2.10.1.so
ec8dd400904ddfcac8b1c343263a790f977159dc /lib64/libc-2.10.1.so
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f /sbin/udevd
379bb828fd08859dbea73279f04abefabc95a6a3 /lib64/libdl-2.10.1.so
[acme@doppio linux-2.6-tip]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To print the buildids in the list of dsos. Will be used by 'perf
buildid-list'
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Renaming it to perf_header__process_sections() and passing a
callback to handle each feature.
The next changesets will introduce 'perf buildid-list' that will
handle just the HEADER_BUILD_ID table, ignoring all the other
features.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to pass the symbol to the filter so that, for instance,
'perf top' can do filtering and also set the private area it
manages, setting the ->map pointer, etc.
I found this while running 'perf top' on a machine where hits
happened on PLT symbols, where ->map wasn't being set up and
segfaults thus happened.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258386491-20278-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ratio between the number of events and the time elapsed makes
sense only if task-clock event is counted. Otherwise it will be
simply a (confusing)
# 0.000 M/sec
This patch outputs the ratio only if task-clock event is counted.
Some test examples of before and after:
Before:
[lucas@skywalker linux.trees.git]$ sudo perf stat -e branch-misses -a -- sleep 1
Performance counter stats for 'sleep 1':
1367818 branch-misses # 0.000 M/sec
1.001494325 seconds time elapsed
After (without task-clock):
[lucas@skywalker perf]$ sudo ./perf stat -e branch-misses -a -- sleep 1
Performance counter stats for 'sleep 1':
1135044 branch-misses
1.001370775 seconds time elapsed
After (with task-clock):
[lucas@skywalker perf]$ sudo ./perf stat -e branch-misses -e task-clock -a -- sleep 1
Performance counter stats for 'sleep 1':
1070111 branch-misses # 0.534 M/sec
2002.730893 task-clock-msecs # 1.999 CPUs
1.001640292 seconds time elapsed
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091115140507.GB21561@skywalker.lan>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch modifies util/string.[ch] to add new function:
perf_atoll() to parse string representing size in bytes.
This function parses (\d+)(b|B|kb|KB|mb|MB|gb|GB) (e.g. "256MB")
and returns its numeric value. (e.g. 268435456)
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258285013-4759-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some architectures (e.g. Alpha) do not support the
-fstack-protector-all compiler option and the use of the option
with -Werror causes the compiler to abort and the build fails.
Test that the compiler supports -fstack-protector-all before
inclusion in CFLAGS.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091111074302.GA3728@omega>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Build a set of section headers for features right after the
datas. Each implemented feature will have one of such section
header that provides the offset and the size of the data
manipulated by the feature.
The trace informations have moved after the data and are
recorded on exit time.
The new layout is as follows:
-----------------------
___
[ magic ] |
[ header size ] |
[ attr size ] |
[ attr content offset ] |
[ attr content size ] |
[ data offset ] File Headers
[ data size ] |
[ event_types offset ] |
[ event_types size ] |
[ feature bitmap ] v
[ attr section ]
[ events section ]
___
[ X ] |
[ X ] |
[ X ] Datas
[ X ] |
[ X ] v
___
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 2 offset ] |
[ Feature 2 size ] v
[ Feature 1 content ]
[ Feature 2 content ]
-----------------------
We have as many feature's section headers as we have features in
use for the current file.
Say Feat 1 and Feat 3 are used by the file, but not Feat 2. Then
the feature headers will be like follows:
[ Feature 1 offset ] |
[ Feature 1 size ] Features headers
[ Feature 3 offset ] |
[ Feature 3 size ] v
There is no hole to cover Feature 2 that is not in use here. We
only need to cover the needed headers in order, from the lowest
feature bit to the highest.
Currently we have two features: HEADER_TRACE_INFO and
HEADER_BUILD_ID. Both have their contents that follow the
feature headers. Putting the contents right after the feature
headers is not mandatory though. While we keep the feature
headers right after the data and in order, their offsets can
point everywhere. We have just put the two above feature
contents in the end of the file for convenience.
The purpose of this layout change is to have a file format that
scales while keeping it simple: having such linear feature
headers is less error prone wrt forward/backward compatibility
as the content of a feature can be put anywhere, its location
can even change by the time, it's fine because its headers will
tell where it is. And we know how to find these headers,
following the above rules.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-6-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
And drop the alternate checks/sets using set_bit or other kind
of helpers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Keep the build-ids reading implementation in the data mapping
but move its call to the headers so that we have a better
control on it (offset seeking, size passing, etc..).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
