Commit graph

1004 commits

Author SHA1 Message Date
Richard Zhao
db3a3d4ef7 i2c: imx: disable clock when it's possible to save power.
Enable clock before START, disable it after STOP.

Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-02 23:28:47 +00:00
Richard Zhao
a4094a76e6 i2c: imx: only imx1 needs disable delay
check cpu_is_mx1() when disable delay.

Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-02 23:28:47 +00:00
Richard Zhao
43309f3b52 i2c: imx: check busy bit when START/STOP
The controller can't do anything else before it actually generates START/STOP.
So we check busy bit to make sure START/STOP is successfully finished.

If we don't check busy bit, START/STOP may fail on some fast CPUs.

Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-02 23:28:46 +00:00
Jean Delvare
18669eabde i2c: Hide probe errors caused by ACPI resource conflicts
When an ACPI resource conflict is detected, error messages are already
printed by ACPI. There's no point in causing the driver core to print
more error messages, so return one of the error codes for which no
message is printed.

This fixes bug #14293:
http://bugzilla.kernel.org/show_bug.cgi?id=14293

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-10-04 22:53:45 +02:00
Bjorn Helgaas
e96c9284bd ACPI: i2c-scmi: don't use acpi_device_uid()
We recently removed the acpi_device_uid() interface because nobody
used it.  I don't think it's essential here either.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-26 01:42:07 -04:00
Russell King
baea7b946f Merge branch 'origin' into for-linus
Conflicts:
	MAINTAINERS
2009-09-24 21:22:33 +01:00
Linus Torvalds
40aba21896 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Clearly mark ACPI drivers as such
  i2c: Add driver for SMBus Control Method Interface
  i2c-pnx: Correct use of request_region/request_mem_region
  MAINTAINERS: Add maintainer for AT24 and PCA9564/PCA9665
  i2c-piix4: Add AMD SB900 SMBus device ID
  i2c/chips: Remove deprecated pcf8574 driver
  i2c/chips: Remove deprecated pca9539 driver
  i2c/chips: Remove deprecated pcf8575 driver
  gpio/pcf857x: Copy i2c_device_id from old pcf8574 driver
  i2c/scx200_acb: Provide more information on bus errors
  i2c: Provide compatibility links for i2c adapters
  i2c: Convert i2c adapters to bus devices
  i2c: Convert i2c clients to a device type
  i2c/tsl2550: Use combined SMBus transactions
  i2c-taos-evm: Switch echo off to improve performance
  i2c: Drop unused i2c_driver.id field
2009-09-23 09:30:48 -07:00
Russell King
28f9f19db9 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-09-21 16:02:30 +01:00
Wolfram Sang
5d3f33318a [PATCH] i2c-imx: make bus available early
As I2C is used by PMICs also, make the busses available early via
subsys_initcall().

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-09-19 23:36:56 +01:00
Mikael Pettersson
b0999cc55b i2c-mv64xxx: correct mv64xxx_i2c_intr() return type
The mv64xxx_i2c_intr() irq handler in drivers/i2c/busses/i2c-mv64xxx.c
is declared as returning 'int', resulting in this compile-time warning:

drivers/i2c/busses/i2c-mv64xxx.c: In function 'mv64xxx_i2c_probe':
drivers/i2c/busses/i2c-mv64xxx.c:540: warning: passing argument 2 of 'request_irq' from incompatible pointer type

Fix: correct the return type to 'irqreturn_t'.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-09-19 23:02:03 +01:00
Jean Delvare
cfd550ed3d i2c: Clearly mark ACPI drivers as such
Now that we have ACPI-based SMBus controller drivers, and we will start
telling users to use them instead of native drivers when I/O resources
conflict, I think it would be good to clearly mark ACPI drivers as such
in Kconfig.

This is exactly the same as we just did for hwmon drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Crane Cai <crane.cai@amd.com>
2009-09-18 22:45:52 +02:00
Crane Cai
dc9854212e i2c: Add driver for SMBus Control Method Interface
This driver supports the SMBus Control Method Interface. It needs BIOS declare
ACPI control methods which described in SMBus Control Method Interface Spec.
http://smbus.org/specs/smbus_cmi10.pdf

Signed-off-by: Crane Cai <crane.cai@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18 22:45:51 +02:00
Julia Lawall
449d2c759d i2c-pnx: Correct use of request_region/request_mem_region
request_mem_region should be used when ioremap is used subsequently.
release_region is then correspondingly replaced by release_mem_region.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression start,E;
@@

- request_region
+ request_mem_region
  (start,...)
... when != request_mem_region(start,...)
    when != start = E
ioremap(start,...)

@@
expression r.start;
@@

- release_region
+ release_mem_region
  (start,...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18 22:45:51 +02:00
Crane Cai
76b3e28fa7 i2c-piix4: Add AMD SB900 SMBus device ID
Add new SMBus device ID for AMD SB900.

Signed-off-by: Crane Cai <crane.cai@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18 22:45:50 +02:00
Wolfram Sang
e7c5c49ecd i2c/chips: Remove deprecated pcf8574 driver
The pcf8574 driver in drivers/i2c/chips which just exports its register to
sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18 22:45:49 +02:00
Wolfram Sang
732d481127 i2c/chips: Remove deprecated pca9539 driver
The pca9539 driver in drivers/i2c/chips which just exports its registers to
sysfs is superseded by drivers/gpio/pca953x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Ben Gardner <gardner.ben@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18 22:45:48 +02:00
Wolfram Sang
8f67eeb0b4 i2c/chips: Remove deprecated pcf8575 driver
The pcf8575 driver in drivers/i2c/chips which just exports its register to
sysfs is superseded by drivers/gpio/pcf857x.c which properly uses the gpiolib.
As this driver has been deprecated for more than a year, finally remove it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Bart Van Assche <bart.vanassche@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18 22:45:48 +02:00
Willy Tarreau
fce96f3e5d i2c/scx200_acb: Provide more information on bus errors
Upon a bus error, it's rather hard to guess what happened. Dumping the
address, length and status provides a lot of value for troubleshooting
issues.

Signed-off-by: Willy Tarreau <wtarreau@exceliance.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18 22:45:47 +02:00
Jean Delvare
2bb5095aff i2c: Provide compatibility links for i2c adapters
Some user-space applications may be relying on i2c adapters showing up
as class devices in sysfs. Provide compatibility links for them for
the time being. We will remove them after a long transition period.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2009-09-18 22:45:46 +02:00
Jean Delvare
4f8cf8240a i2c: Convert i2c adapters to bus devices
Kay says i2c adapters shouldn't be class devices but bus devices.
Convert them that way, using a device type.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2009-09-18 22:45:46 +02:00
Jean Delvare
51298d1257 i2c: Convert i2c clients to a device type
This is required for upcoming changes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2009-09-18 22:45:45 +02:00
Jean Delvare
ac7809414f i2c/tsl2550: Use combined SMBus transactions
Make the I/O faster, mainly by using combined SMBus transactions when
possible. While the TSL2550 datasheet doesn't say the device supports
them, they seem to work just fine in practice, and a combined
transaction is faster than two simple transactions in many cases and
always more reliable.

A side effect is to suppress the delays between SMBus writes and
reads. The datasheet doesn't say they are needed and things work just
fine for me without them.

I also couldn't see any reason for the delay between reading the two
channels. Nor for the loop to get a reading in the first place. The
400 ms delay between samples only matters at chip power-up, after that
the chip always hold the previously sampled value so we never get to
wait.

All these changes make reading the lux value much faster and cheaper.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Michele De Candia <michele.decandia@valueteam.com>
Cc: Rodolfo Giometti <giometti@linux.it>
2009-09-18 22:45:44 +02:00
Jean Delvare
27693ce5f3 i2c-taos-evm: Switch echo off to improve performance
When echo is on, we waste time reading back our orders. Switching echo
off makes performance much better: SMBus byte data transactions are 47%
faster and byte transactions are 24% faster.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18 22:45:43 +02:00
Haojian Zhuang
d7c46ddde3 [ARM] pxa: update dependancy of pxa i2c module
PXA I2C module is also used in Marvell PXA168 and PXA910 series.
Update the module dependancy of PXA I2C.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:27 +08:00
Magnus Damm
f1a3b994f9 i2c: Runtime PM for SuperH Mobile I2C
This patch modifies the SuperH Mobile I2C driver to support
Runtime PM. These changes is all that is needed for proper
Runtime PM support in this driver. Driver callbacks for
Runtime PM are empty because the device registers are always
re-initialized after pm_runtime_get_sync().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23 18:03:19 +09:00
Rafael J. Wysocki
8400146d0d Merge branch 'master' into for-linus 2009-08-23 00:03:00 +02:00
Linus Walleij
c37faafa7d i2c-stu300: I2C STU300 stability updates
- blk clk is enabled when an irq arrives. The clk should be enabled,
  but just to make sure.
- All error bits are handled no matter state machine state
- All irq's will run complete() except for irq's that wasn't an event.
- No more looking into status registers just in case an interrupt
  has happend and the irq handle wasn't executed.
- irq_disable/enable are now separete functions.
- clk settings calculation changed to round upwards instead of
  downwards.
- Number of address send attempts before giving up is increased to 12
  from 10 since it most times take 8 tries before getting through.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20 22:27:58 +01:00
Moiz Sonasath
61149787d6 i2c-omap: Enable workaround for Errata 1.153 based on
Silicon Errata 1.153 has been fixed on OMAP 3630|4430 with the use of a later
version of I2C IP block.

The errata impacts OMAP 2420|2430|3430, enable the workaround for these based
on I2C IP block revision number instead of OMAP CPU type

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20 22:27:58 +01:00
Moiz Sonasath
dd11976aea i2c-omap: ACK pending [R/X]DR and [R/X]RDY interrupts
ACK any pending read/write interrupts before exiting the ISR either after
completing the operation [ARDY interrupt] or in case of an error
[NACK|AL interrupt]

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20 22:27:57 +01:00
Nishanth Menon
dcc4ec2694 i2c-omap: Fix I2C status ACK
I2C status ack for [RX]RDR and [RX]RDY could
cause race conditions of clearing the event
twice and a violation of the programing
sequence as defined in TRM This patch fixes
the same.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-20 22:27:57 +01:00
Rafael J. Wysocki
2e6713c766 Merge branch 'master' into for-linus 2009-07-30 19:38:04 +02:00
Sonasath, Moiz
cd086d3aa6 i2c-omap: OMAP3430 Silicon Errata 1.153
When an XRDY/XDR is hit, wait for XUDF before writing data to DATA_REG.
Otherwise some data bytes can be lost while transferring them from the
memory to the I2C interface.

Do a Busy-wait for XUDF, before writing data to DATA_REG. While waiting
if there is NACK | AL, set the appropriate error flags, ack the pending
interrupts and return from the ISR.

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram pandita <vikram.pandita@ti.com>
[ben-linux@fluff.org: fixed mail format and added i2c-omap to subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 01:03:24 +01:00
Sonasath, Moiz
04c688dd7a i2c-omap: In case of a NACK|ARDY|AL return from the ISR
In case of a NACK or ARDY or AL interrupt, complete the request.
There is no need to service the RRDY/RDR or XRDY/XDR interrupts.

Refer TRM SWPU114: Figure 18-31.I2C Master Transmitter Mode, Interrupt Method,
in F/S and HS Modes

http://focus.ti.com/pdfs/wtbu/SWPU114T_PrelimFinalEPDF_06_25_2009.pdf

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram pandita <vikram.pandita@ti.com>
[ben-linux@fluff.org: fixed mail format and added i2c-omap to subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 01:03:24 +01:00
Sonasath, Moiz
bfb6b6588a i2c-omap: Bug in reading the RXSTAT/TXSTAT values from the I2C_BUFFSTAT register
Fix bug in reading the I2C_BUFFSTAT register for getting byte count on RX/TX interrupt.

On Interrupt: I2C_STAT[RDR],
	read 'RXSTAT' from I2C_BUFFSTAT[8-13]
On Interrupt: I2C_STAT[XDR]
	read 'TXSTAT' from I2C_BUFFSTAT[0-5]

Signed-off-by: Jagadeesh Pakaravoor <j-pakaravoor@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram pandita <vikram.pandita@ti.com>
[ben-linux@fluff.org: fixed mail format and added i2c-omap to subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 01:03:23 +01:00
Magnus Damm
ccb3bc16b4 i2c-sh_mobile: change module_init() to subsys_initcall()
Convert the i2c-sh_mobile i2c bus driver to use
subsys_initcall() instead of module_init().

This change makes the driver register a bit earlier which
together with earlier platform data moves the time for probe().
The earlier probe() makes it possible to use i2c_get_adapter()
and i2c_transfer() from device_initcall().

The same strategy is used by other i2c bus drivers such as
i2c-pxa.c and i2c-s3c2410.c.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
[ben-linux@fluff.org: minor subject updaye]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 00:59:09 +01:00
Roel Kluin
783fd6fa4c i2c: strncpy does not null terminate string
strlcpy() will always null terminate the string.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 00:55:50 +01:00
Peter Korsgaard
0e014e92ba i2c-s3c2410: s3c24xx_i2c_init: don't clobber IICLC value
s3c24xx_i2c_init() was overwriting the IICLC value set just above in
s3c24xx_i2c_clockrate() with zero, effectively disabling the platform
line control setting.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 00:55:50 +01:00
Rafael J. Wysocki
b4093d6235 Merge branch 'master' into for-linus 2009-07-29 20:28:08 +02:00
Michele Jr De Candia
96f699ad09 i2c/tsl2550: Fix lux value in dark environment
I've tested TSL2550 driver and I've found a bug: when light is off, 
returned value from tsl2550_calculate_lux function is -1 when it should 
be 0 (sensor correctly read that light was off).

I think the bug is that a zero c0 value (approximated value of ch0) is 
misinterpreted as an error. 

Signed-off-by: Michele Jr De Candia <michele.decandia@valueteam.com>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-07-28 16:33:03 +02:00
Magnus Damm
6a6c6189b1 I2C: Rework i2c-s3c2410 suspend_late()/resume() V2
This is V2 of the i2c-s3c2410 dev_pm_ops patch.

The callbacks are converted for CONFIG_SUSPEND like this:
  suspend_late() -> suspend_noirq()
  resume() -> resume()

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-22 00:28:39 +02:00
Magnus Damm
57f4d4f1b7 I2C: Rework i2c-pxa suspend_late()/resume_early()
This patch reworks platform driver power management code
for i2c-pxa from legacy late/early callbacks to dev_pm_ops.

The callbacks are converted for CONFIG_SUSPEND like this:
  suspend_late() -> suspend_noirq()
  resume_early() -> resume_noirq()

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-22 00:28:39 +02:00
Julia Lawall
593308259b i2c: Use resource_size
Use the function resource_size, which reduces the chance of introducing
off-by-one errors in calculating the resource size.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
struct resource *res;
@@

- (res->end - res->start) + 1
+ resource_size(res)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-15 00:03:56 +01:00
David Brownell
7605fa3b0a i2c-davinci: behave with i2cdetect
Make i2c-davinci cope properly with "i2cdetect":  don't spew
syslog spam on perfectly normal behaviors, or respond to any
address other than the one reserved for the SMBus host.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-15 00:03:56 +01:00
Kevin Hilman
e164ddeeb8 i2c-davinci: convert clock usage after clkdev conversion
DaVinci core code has converted to the new clkdev API so
clock name strings are not needed.  Instead, just the a
'struct device' pointer is needed.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-15 00:03:56 +01:00
Joe Perches
ad361c9884 Remove multiple KERN_ prefixes from printk formats
Commit 5fd29d6ccb ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08 10:30:03 -07:00
Ingo Molnar
47749b14e5 i2c: fix build bug in i2c-designware.c
This build error triggers on x86:

 drivers/built-in.o: In function `i2c_dw_init':
 i2c-designware.c:(.text+0x4e37ca): undefined reference to `clk_get_rate'
 drivers/built-in.o: In function `dw_i2c_probe':
 i2c-designware.c:(.devinit.text+0x51f5e): undefined reference to `clk_get'
 i2c-designware.c:(.devinit.text+0x51f76): undefined reference to `clk_enable'
 i2c-designware.c:(.devinit.text+0x520ff): undefined reference to `clk_disable'
 i2c-designware.c:(.devinit.text+0x52108): undefined reference to `clk_put'

Because this new driver uses the clk_*() facilities which is an
ARM-only thing currently.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25 11:22:12 -07:00
Baruch Siach
1ab52cf910 i2c: driver for the Synopsys DesignWare I2C controller
The i2c Linux driver for the DesignWare i2c block of Synopsys, which is meant
for AMBA Peripheral Bus. This i2c block is used on SoC chips like the ARM9
based PVG610.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-24 00:18:56 +01:00
Michael Trimarchi
dc1972d027 i2c: Fix stuck transaction on cpm-i2c driver
When a process tries to read/write a disconnected i2c device, it receives a signal (e.g. ctrl-c) and the kernel gets stuck.

BUG: soft lockup - CPU#0 stuck for 61s! [I2CEEpromTest:392]
NIP: c01628f8 LR: c01628f0 CTR: c00177cc
REGS: c39abd70 TRAP: 0901   Not tainted  (2.6.25.7-alcore)
MSR: 00009032 <EE,ME,IR,DR>  CR: 42042048  XER: 20000000
TASK = c3889bd0[392] 'I2CEEpromTest' THREAD: c39aa000
GPR00: 00009000 c39abe20 c3889bd0 c39075c8 c39abe28 00000001 00000000 00000001
GPR08: c3889bd0 c39075c8 00009032 c39abe34 00002437
NIP [c01628f8] cpm_i2c_xfer+0x5fc/0x6d0
LR [c01628f0] cpm_i2c_xfer+0x5f4/0x6d0
Call Trace:
[c39abe20] [c0162924] cpm_i2c_xfer+0x628/0x6d0 (unreliable)
[c39abe90] [c015f6a0] i2c_transfer+0x88/0xb4
[c39abeb0] [c0160164] i2c_master_recv+0x48/0x6c
[c39abed0] [c01618dc] i2cdev_read+0x50/0xe4
[c39abef0] [c0068b24] vfs_read+0xc4/0x108
[c39abf10] [c0068f4c] sys_read+0x4c/0x90
[c39abf40] [c000d348] ret_from_syscall+0x0/0x38
Instruction dump:
3bc00064 92610010 3bf201c8 92810014 3b61

This happen because though the wait_event_interruptible_timeout takes the
signals into account, the driver does not handle them.
We propose to change the wait_event_interruptible_timeout with
wait_event_timeout, leaving the signals to be handled in other points
on the upper layers.

Signed-off-by: Bruno Morelli <bruno@evidence.eu.com>
Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
[ben-linux@fluff.org: fix title for patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 01:43:32 +01:00
Tony Lindgren
ff0f242626 i2c-omap: Fix build breaking typo cpu_is_omap_2430
Hi Ben,

Can you please queue this fix?

Thanks,

Tony

>From ffe2b2cdf6283770b70a197e3748c6b40a1006be Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 17 Jun 2009 13:14:23 +0300
Subject: [PATCH] i2c-omap: Fix build breaking typo in cpu_is_omap_2430

Commit 84bf2c86 introduced a typo, it should be cpu_is_omap2430
instead. The typo was probably caused by a mismerge.

Without this patch all omaps fail to build with:
error: implicit declaration of function 'cpu_is_omap_2430'

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 01:43:32 +01:00
Linus Torvalds
5c6fb0059c Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: New macro to initialize i2c address lists on the fly
  i2c: Don't advertise i2c functions when not available
  i2c: Use rwsem instead of mutex for board info
  i2c: Add a sysfs interface to instantiate devices
  i2c: Limit core locking to the necessary sections
  i2c: Kill the redundant client list
  i2c: Kill is_newstyle_driver
  i2c: Merge i2c_attach_client into i2c_new_device
  i2c: Drop i2c_probe function
  i2c: Get rid of the legacy binding model
  i2c: Kill client_register and client_unregister methods
2009-06-19 17:45:51 -07:00