Commit graph

1424 commits

Author SHA1 Message Date
Linus Torvalds
133309a89e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (52 commits)
  Input: bcm5974 - silence uninitialized variables warnings
  Input: wistron_btns - add keymap for AOpen 1557
  Input: psmouse - use boolean type
  Input: i8042 - use platform_driver_probe
  Input: i8042 - use boolean type where it makes sense
  Input: i8042 - try disabling and re-enabling AUX port at close
  Input: pxa27x_keypad - allow modifying keymap from userspace
  Input: sunkbd - fix formatting
  Input: i8042 - bypass AUX IRQ delivery test on laptops
  Input: wacom_w8001 - simplify querying logic
  Input: atkbd - allow setting force-release bitmap via sysfs
  Input: w90p910_keypad - move a dereference below a NULL test
  Input: add twl4030_keypad driver
  Input: matrix-keypad - add function to build device keymap
  Input: tosakbd - fix cleaning up KEY_STROBEs after error
  Input: joydev - validate axis/button maps before clobbering current ones
  Input: xpad - add USB ID for the drumkit controller from Rock Band
  Input: w90p910_keypad - rename driver name to match platform
  Input: add new driver for Sentelic Finger Sensing Pad
  Input: psmouse - allow defining read-only attributes
  ...
2009-09-14 17:56:51 -07:00
Linus Torvalds
2ca7d674d7 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits)
  [ARM] Update mach-types
  ARM: 5636/1: Move vendor enum to AMBA include
  ARM: Fix pfn_valid() for sparse memory
  [ARM] orion5x: Add LaCie NAS 2Big Network support
  [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume
  ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board
  ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board
  ARM: 5689/1: Update default config of HP Jornada 700-series machines
  ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem
  ARM: 5688/1: ks8695_serial: disable_irq() lockup
  ARM: 5687/1: fix an oops with highmem
  ARM: 5684/1: Add nuc960 platform to w90x900
  ARM: 5683/1: Add nuc950 platform to w90x900
  ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform
  ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver
  ARM: 5625/1: fix hard coded 4K resource size in amba bus detection
  MMC: MMCI: convert realview MMC to use gpiolib
  ARM: 5685/1: Make MMCI driver compile without gpiolib
  ARM: implement highpte
  ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ
  ...

Fix up trivial conflict in arch/arm/kernel/signal.c.

It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS:
Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.
2009-09-14 17:48:14 -07:00
Dmitry Torokhov
fc8e1ead93 Merge branch 'next' into for-linus 2009-09-13 21:16:56 -07:00
Henrik Rydberg
9de48cc300 Input: bcm5974 - silence uninitialized variables warnings
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-13 09:13:38 -07:00
Dmitry Torokhov
85927b0d52 Input: wistron_btns - add keymap for AOpen 1557
This one does not have anything useful in DMI either so again
we need to use:

    force=1 keymap=aopen1557

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-13 09:12:21 -07:00
Russell King
87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
cf7a2b4fb6 Merge branches 'arm', 'at91', 'bcmring', 'ep93xx', 'mach-types', 'misc' and 'w90x900' into devel 2009-09-12 12:01:34 +01:00
Dmitry Torokhov
b7802c5c1e Input: psmouse - use boolean type
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:11:38 -07:00
Dmitry Torokhov
f81134163f Input: i8042 - use platform_driver_probe
i8042 is not hot-pluggable and we create the device when we register
the driver, so let's save some memory by using platform_device_probe
and using __init instead of __devinit.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:11:37 -07:00
Dmitry Torokhov
386b384900 Input: i8042 - use boolean type where it makes sense
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:11:36 -07:00
Dmitry Torokhov
5ddbc77c3e Input: i8042 - try disabling and re-enabling AUX port at close
Ever since we switched from having a polling timer to registering IRQ
handlers for both keyboard and AUX ports at the driver registration
time, on certain boxes probing for a mouse results in keyboard
stopping working. The only real difference between old and new way is
that before we disabled ports after unsuccessful probe whereas now we
leave them as is. Try to emulate the old behavior by disabling and
immediately re-enabling AUX and KBD ports when corresponding serio
port is being closed.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:11:35 -07:00
Dmitry Torokhov
bd96f37895 Input: pxa27x_keypad - allow modifying keymap from userspace
Tested-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:11:34 -07:00
Dmitry Torokhov
7cac9cd935 Input: sunkbd - fix formatting
Adjust the way 'switch' statements were indented; make sure we stay
under 80 ciolumns.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:11:32 -07:00
Dmitry Torokhov
1c7827ae70 Input: i8042 - bypass AUX IRQ delivery test on laptops
It seems that many laptops do not fully implement AUX LOOP command in
their keyboard controllers, causing issues with touchpad detection.
We know however that almost every laptop/portable uses a PS/2 pointing
device and, even if user disables it in favor of an external mouse,
the system will not use IRQ 12 for anything else. Therefore we may
bypass AUX IRQ delivery test when running on a laptop and assume that
it is routed properly.

Just to be safe we require the box to have good PNP data in order to
bypass the test.

[Jin Dongming <jin.dongming@np.css.fujitsu.com>: fix crash caused
 by missing terminator in the DMI table]

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10 22:09:40 -07:00
Linus Torvalds
6399534472 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: atkbd - add Compaq Presario R4000-series repeat quirk
  Input: i8042 - add Acer Aspire 5536 to the nomux list
2009-09-05 13:41:29 -07:00
Dave Andrews
2bcaa6a423 Input: atkbd - add Compaq Presario R4000-series repeat quirk
Compaq Presario R4000-series laptops are not sending a "volume up button
release" and "volume down button release" signal in the PS/2 protocol for
atkbd. The URL below has some of confirmed reports:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/385477

Signed-off-by: Dave Andrews <jetdog330@hotmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-03 20:41:44 -07:00
Dmitry Torokhov
41c372dcad Input: wacom_w8001 - simplify querying logic
There is no need for locking when we send query and start commands
to the touchscreen since there is no concurrency.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-03 20:38:37 -07:00
Dmitry Torokhov
1ba36e11b2 Input: atkbd - allow setting force-release bitmap via sysfs
There are more and more laptop requiring use of force_release quirk
for their multimedia and other specialized keys. Adding their DMI data
to the kernel is not sustainable; instead we will rely on help from
userspace (HAL) to do that for us.

This patch creates a new 'force_release' sysfs attribute (that belongs
to serio device to which keyboard is attached) which can be used to set
up force_release keymap. For example, Dell laptop owners might do:

echo 133-139,143,147 > /sys/devices/platform/i8042/serio0/force_release

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-03 20:30:36 -07:00
wanzongshun
35c9221acb ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform
Add the cpu.c and dev.c and modify w90p910 platform
to apply to use the common API(provided by cpu.c and dev.c)
at the same time, I renamed all w90x900 to nuc900 in every
c file of w90x900 platform and touchscreen's driver name.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02 11:22:23 +01:00
Julia Lawall
903b9124ea Input: w90p910_keypad - move a dereference below a NULL test
We should first check whether platform data is NULL or not, before
dereferencing it to get the keymap.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-30 11:55:47 -07:00
David Brownell
9d8340687c Input: add twl4030_keypad driver
Add a driver for the keypad controller on TWL4030 family chips.
These support up to an 8x8 key matrix.  The TWL4030 multifunction
chips are mostly used on OMAP3 (or OMAP 2430) based boards.

[dtor@mail.ru: switch to matrix-keypad framework, fix changing
keymap from userspace]
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-27 22:06:15 -07:00
Dmitry Torokhov
77a53fd218 Input: matrix-keypad - add function to build device keymap
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-27 22:05:39 -07:00
Roel Kluin
8fbac18e8e Input: tosakbd - fix cleaning up KEY_STROBEs after error
Direct to fail2 to gpio_free() the KEY_STROBEs as well as the KEY_SENSEs.

[dtor@mail.ru: change keymap from unsigned int to unsigned short]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-27 22:02:47 -07:00
Stephen Kitt
999b874f4a Input: joydev - validate axis/button maps before clobbering current ones
Up to now axis and button map validation was done after the user-supplied
values were copied over the driver's map. This patch copies the
user-supplied values into temporary buffers and validated them before
overwriting the driver's permanent maps.

Also change JSIOCGBTNMAP and JSIOCGAXMAP to return number of bytes returned
to userspace instead of 0.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-27 22:01:39 -07:00
Dmitry Torokhov
4b61bb575b Merge commit 'v2.6.31-rc8' into next 2009-08-27 22:00:20 -07:00
Dmitry Torokhov
ced909ff04 Input: i8042 - add Acer Aspire 5536 to the nomux list
When KBC is in active multiplexing mode, disabling and re-enabling the
touchpad with the special key leaves the touchpad dead. Since the laptop
does not have any external PS/2 ports disabling MUX mode should be safe.

Reported-by: Eugeniy Meshcheryakov <eugen@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-26 02:25:32 -07:00
Linus Torvalds
22e93eddd9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ucb1400_ts - enable interrupt unconditionally
  Input: ucb1400_ts - enable ADC Filter
  Input: wacom - don't use on-stack memory for report buffers
  Input: iforce - support new revision of ACT LABS Force RS
  Input: joydev - decouple axis and button map ioctls from input constants
2009-08-24 12:25:27 -07:00
Pavel Revak
9b2fb2da4e Input: ucb1400_ts - enable interrupt unconditionally
Sometimes, when using the touchscreen, it stops working till next restart
and the following message is printed:

	ucb1400: unexpected IE_STATUS = 0x0

The following patch retriggers the touchscreen interrupt unconditionally.
This prevents hanging of the touchscreen in case of bogus interrupt
occurence.

Signed-off-by: Pavel Revak <palo@bielyvlk.sk>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-21 00:54:13 -07:00
Marek Vasut
1700f5fde8 Input: ucb1400_ts - enable ADC Filter
This patch enables ADC filtering on UCB1400 codec by default. The
benefit from this change is mostly on some Colibri boards where
the ADCSYNC pin of the UCB1400 codec isn't connected causing the
touchscreen to jitter very badly. This change has no visible
effect on boards where the ADCSYNC pin is connected.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Palo Revak <palo@bielyvlk.sk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-21 00:53:12 -07:00
Dmitry Torokhov
3b7307c2d6 Input: wacom - don't use on-stack memory for report buffers
Tested-by: Martin Capitanio <martin@capitanio.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-21 00:51:28 -07:00
Corbin Simpson
805423e84e Input: xpad - add USB ID for the drumkit controller from Rock Band
Signed-off-by: Corbin Simpson <MostAwesomeDude@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-20 22:06:31 -07:00
Wan ZongShun
fb962e1e17 Input: w90p910_keypad - rename driver name to match platform
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-20 21:55:01 -07:00
Jiri Kosina
68947b8f9a Input: iforce - support new revision of ACT LABS Force RS
Reported-by: cemede@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19 22:16:51 -07:00
Tai-hwa Liang
fc69f4a6af Input: add new driver for Sentelic Finger Sensing Pad
This is the driver for Sentelic Finger Sensing Pad which can be found
on MSI WIND Netbook.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19 21:46:09 -07:00
Dmitry Torokhov
3b72094409 Input: psmouse - allow defining read-only attributes
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19 21:14:20 -07:00
Stephen Kitt
ec8b4b7085 Input: joydev - decouple axis and button map ioctls from input constants
The KEY_MAX change in 2.6.28 changed the values of the JSIOCSBTNMAP and
JSIOCGBTNMAP constants; software compiled with the old values no longer
works with kernels following 2.6.28, because the ioctl switch statement
no longer matches the values given by the software. This patch handles
these ioctls independently of the length of data specified, and applies the
same treatment to JSIOCSAXMAP and JSIOCGAXMAP which currently depend on
ABS_MAX.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-12 01:16:13 -07:00
Daniel Mack
25a70e38cd Input: eeti_ts - allow active high irq lines
This adds a struct eeti_ts_platform_data which currently holds only one
value to specify the interrupt polarity.

The driver has a fallback if no platform data is passed in via the
i2c_board_info, so no regression is caused.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-12 01:09:50 -07:00
Dmitry Torokhov
09113aea55 Input: w90p910_keypad - adjust to use definitions from matrix_keypad.h
Also have the driver send MSC_SCAN events as most keyboards do to aid
in updating keymap from userspace.

Tested-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09 21:24:26 -07:00
Wan ZongShun
4a15235e79 Input: add keypad driver for w90p910
Add keypad driver for the 4x4 keypad on an evaluation board based
on w90p910.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09 21:24:09 -07:00
Dmitry Torokhov
fa71c605c2 Input: combine hil_kbd and hil_ptr drivers
hil_kbd and hil_ptr look like twins so it makes sense to combine them
into a single driver.

[deller@gmx.de: add MODULE_ALIAS() entry for mouse]
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09 13:27:27 -07:00
Dmitry Torokhov
1437dc3089 Input: hil_kbd - prepare for merging with hil_ptr
Rename functions and variables from [hil_]kbd to [hil_]dev in
preparation of merging hil_kbd and hil_ptr.

Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09 13:27:09 -07:00
Dmitry Torokhov
6777f01728 Input: hil_kbd - switch to use completion instead of semaphore
Stop abusing semaphore for waiting, use completion instead. Also handle
errors from input_register_device.

Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09 13:26:37 -07:00
Dmitry Torokhov
67dbe83adc Input: wistron_btns - switch to using dev_pm_ops
Also start using 'bool' where it makes sense.

Tested-by: Giuseppe Mazzotta <g.mazzotta@iragan.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-08 09:29:23 -07:00
Linus Torvalds
385861206c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: matrix_keypad - make matrix keymap size dynamic
  Input: wistron_btns - support Prestigio Wifi RF kill button
  Input: i8042 - add Asus G1S to noloop exception list
2009-08-07 10:42:14 -07:00
Eric Miao
d82f1c3534 Input: matrix_keypad - make matrix keymap size dynamic
Remove assumption on the shift and size of rows/columns form
matrix_keypad driver.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05 22:20:14 -07:00
TJ
194934785a Input: wistron_btns - support Prestigio Wifi RF kill button
The Prestigio 157, an old no-name clone laptop uses input keys very
similar to the Wistron 1557/MS2141 with the addition of BIOS-controlled
wireless radio frequency kill switch.

This patch adds support for the RF kill switch control and adds manual
identification of the model.

The Prestigio does not expose any recognisable identity via dmidecode
and so requires manual selection at module init using

force=1 keymap=prestigio

Signed-off-by: TJ <ubuntu@tjworld.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05 22:19:32 -07:00
Dmitry Torokhov
dd0d5443da Input: serio - don't use serio->write() directly
We have a nice wrapper for that.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05 00:43:43 -07:00
Paul Fox
c46dd1eb9a Input: hgpk - forced recalibration for the OLPC touchpad
The OLPC XO laptop incorporates a combination touchpad/tablet device
which unfortunately requires frequent recalibration.  The driver will
force this automatically when various suspicious behaviors are
observed, and the user can recalibrate manually (with a special
keyboard sequence). There's currently no way, however, for an external
program to cause recalibration. We can not use the reconnect
capability which is already available in /sys because full reset of
the touchpad takes 1.1 - 1.2 secons which is too long.

This patch creates a new node in /sys which, when written with '1',
will force a touchpad recalibration; no other writes (or reads)
of this node are supported.

Signed-off-by: Paul Fox <pgf@laptop.org>
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05 00:34:32 -07:00
Jory A. Pratt
685aaca751 Input: i8042 - add Asus G1S to noloop exception list
The synaptic touchpad on the Asus G1S is not properly detected when
rebooting machine or on cold boot from time to time. Adding the Asus
G1S to the noloop exception table resolves the issue.

# dmidecode 2.10
SMBIOS 2.4 present.

Handle 0x0001, DMI type 1, 27 bytes
System Information
     Manufacturer: ASUSTeK Computer Inc.
     Product Name: G1S
     Version: 1.0
     Wake-up Type: Power Switch
     SKU Number:
     Family:

Signed-off-by: Jory A. Pratt <geekypenguin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05 00:01:53 -07:00