Commit graph

140 commits

Author SHA1 Message Date
Jeff Garzik
6e07e16404 Merge branch 'upstream' 2006-04-01 14:29:12 -05:00
Tejun Heo
e1211e3fa7 [PATCH] libata: implement ata_dev_enabled and disabled()
This patch renames ata_dev_present() to ata_dev_enabled() and adds
ata_dev_disabled().  This is to discern the state where a device is
present but disabled from not-present state.  This disctinction is
necessary when configuring transfer mode because device selection
timing must not be violated even if a device fails to configure.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-01 12:33:45 -05:00
Jeff Garzik
4f0e7c51ae Merge branch 'upstream'
Conflicts:

	drivers/scsi/sata_mv.c
2006-03-29 19:59:39 -05:00
Alan Cox
5444a6f405 [PATCH] libata: Simplex and other mode filtering logic
Add a field to the host_set called 'flags' (was host_set_flags changed
to suit Jeff)
Add a simplex_claimed field so we can remember who owns the DMA channel
Add a ->mode_filter() hook to allow drivers to filter modes
Add docs for mode_filter and set_mode
Filter according to simplex state
Filter cable in core

This provides the needed framework to support all the mode rules found
in the PATA world. The simplex filter deals with 'to spec' simplex DMA
systems found in older chips. The cable filter avoids duplicating the
same rules in each chip driver with PATA. Finally the mode filter is
neccessary because drive/chip combinations have errata that forbid
certain modes with some drives or types of ATA object.

Drive speed setup remains per channel for now and the filters now use
the framework Tejun put into place which cleans them up a lot from the
older libata-pata patches.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 19:30:28 -05:00
Alan Cox
e35a9e01f2 [PATCH] libata: Add ->set_mode hook for odd drivers
Some hardware doesn't want the usual mode setup logic running. This
allows the hardware driver to replace it for special cases in the least
invasive way possible.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 19:30:27 -05:00
Alan Cox
4e5ec5dba2 [PATCH] libata: BMDMA handling updates
This is the minimal patch set to enable the current code to be used with
a controller following SFF (ie any PATA and early SATA controllers)
safely without crashes if there is no BMDMA area or if BMDMA is not
assigned by the BIOS for some reason.

Simplex status is recorded but not acted upon in this change, this isn't
a problem with the current drivers as none of them are for simplex
hardware. A following diff will deal with that.

The flags in the probe structure remain ->host_set_flags although Jeff
asked me to rename them, simply because the rename would break the usual
Linux rules that old code should break when there are changes. not
compile and run and then blow up/eat your computer/etc. Renaming this
later is a trivial exercise once a better name is chosen.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 19:30:27 -05:00
Albert Lee
27cdadef6d [PATCH] libata-dev: Cleanup unused enums/functions
Cleanup the following unused functions:
- ata_pio_poll()
- ata_pio_complete()
- ata_pio_first_block()
- ata_pio_block()
- ata_pio_error()
ap->pio_task_timeout and other enums.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-29 17:21:54 -05:00
Jeff Garzik
4bbf7bc4c7 Merge branch 'upstream'
Conflicts:

	drivers/scsi/libata-core.c
2006-03-24 12:29:39 -05:00
Tejun Heo
aec5c3c1a9 [PATCH] libata: kill E.D.D.
E.D.D. has no user in-tree and mostly useless.  Kill it.  For possible
out-of-tree users, add a nice warning message and error handling if
LLDD doesn't report any useable reset mechanism (and thus tries to use
E.D.D.).

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 12:24:33 -05:00
Brian King
2f1f610b62 [PATCH] libata: Remove dependence on host_set->dev for SAS
Remove some of the dependence on the host_set struct
in preparation for supporting SAS HBAs. Adds a struct device
pointer to the ata_port struct.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 10:18:43 -05:00
Alan Cox
ebdfca6eb1 [PATCH] libata: add ata_dev_pair helper
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:52:32 -05:00
Nigel Cunningham
082776e4be [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.
At the moment libata doesn't pass pm_message_t down ata_device_suspend.
This causes drives to be powered down when we just want a freeze,
causing unnecessary wear and tear. This patch gets pm_message_t passed
down so that it can be used to determine whether to power down the
drive.

Signed-off-by: Nigel Cunningham <nigel@suspend2.net>

 drivers/scsi/libata-core.c |    5 +++--
 drivers/scsi/libata-scsi.c |    4 ++--
 drivers/scsi/scsi_sysfs.c  |    2 +-
 include/linux/libata.h     |    4 ++--
 include/scsi/scsi_host.h   |    2 +-
 5 files changed, 9 insertions(+), 8 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:51:36 -05:00
Tejun Heo
acf356b12d [PATCH] libata: add per-dev pio/mwdma/udma_mask
Add per-dev pio/mwdma/udma_mask.  All transfer mode limits used to be
applied to ap->*_mask which unnecessarily restricted other devices
sharing the port.  This change will also benefit later EH speed down
and hotplug.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:28:33 -05:00
Jeff Garzik
11ed56fb78 Merge branch 'upstream'
Conflicts:

	drivers/scsi/sata_vsc.c
2006-03-24 09:24:04 -05:00
Jeff Garzik
f01c184569 Merge branch 'master' 2006-03-22 19:13:54 -05:00
Jeff Garzik
17bb34a3c5 [libata] add prototypes for helpers
Add prototypes for stuff recently added by Alan.
2006-03-21 21:29:21 -05:00
Brian King
e46834cd2d [PATCH] libata: Add some dummy noop functions
Add some dummy noop functions for use by libata clients
that do not need to do anything. Future SAS patches will
utilize these functions.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21 21:03:43 -05:00
Tejun Heo
30afc84cf7 [SCSI] libata: implement minimal transport template for ->eh_timed_out
SCSI midlayer has moved hostt->eh_timed_out to transport template.  As
libata doesn't need full-blown transport support yet, implement
minimal transport for libata.  No transport class or whatsoever, just
empty transport template with ->eh_timed_out hook.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-21 13:07:05 -06:00
Jeff Garzik
ce1e7a2ac7 Merge branch 'upstream' 2006-03-11 19:21:17 -05:00
Tejun Heo
1da7b0d01b [PATCH] libata: improve xfer mask constants and update ata_mode_string()
Add ATA_BITS_*, ATA_MASK_* macros and reorder xfer_mask fields such
that higher transfer mode is placed at higher order bit.  As thie
reordering breaks ata_mode_string(), this patch also rewrites
ata_mode_string().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 19:03:38 -05:00
Tejun Heo
2e755f68ee [PATCH] libata: rename ATA_FLAG_FLUSH_PIO_TASK to ATA_FLAG_FLUSH_PORT_TASK
Rename ATA_FLAG_FLUSH_PIO_TASK to ATA_FLAG_FLUSH_PORT_TASK.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 17:57:21 -05:00
Tejun Heo
507ceda003 [PATCH] libata: kill unused pio_task and packet_task
Kill unused pio_task and packet_task.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 17:57:20 -05:00
Tejun Heo
86e45b6bd6 [PATCH] libata: implement port_task
Implement port_task.  LLDD's can schedule a function to be executed
with context after specified delay.  libata core takes care of
synchronization against EH.  This is generalized form of pio_task and
packet_task which are tied to PIO hsm implementation.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 17:57:20 -05:00
Tejun Heo
623a3128aa [PATCH] libata: implement ata_dev_revalidate()
ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and
makes sure it's the same device as the configured one.  Once it's
verified that it's the same device, @dev is configured according to
newly read IDENTIFY PAGE.  Note that revalidation currently doesn't
invoke transfer mode reconfiguration.

Criteria for 'same device'

* same class (of course)
* same model string
* same serial string
* if ATA, same n_sectors (to catch geometry parameter changes)

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 11:09:42 -05:00
Tejun Heo
4b2f3ededc [PATCH] libata: fold ata_dev_config() into ata_dev_configure()
ata_dev_config() needs to be done everytime a device is configured.
Fold it into ata_dev_configure().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03 17:31:04 -05:00
Tejun Heo
d9572b1d5e [PATCH] libata: convert dev->id to pointer
Convert dev->id from array to pointer.  This is to accomodate
revalidation.  During revalidation, both old and new IDENTIFY pages
should be accessible and single ->id array doesn't cut it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03 17:31:04 -05:00
Tejun Heo
597afd2140 [PATCH] libata: seperate out ata_class_present()
Seperate out ata_class_present() from ata_dev_present().  This is
useful because new reset mechanism deals with classes[] directly.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03 15:39:54 -05:00
Jeff Garzik
11fff8287f Merge branch 'upstream' 2006-02-20 16:56:08 -05:00
Jeff Garzik
f131883e73 Merge branch 'upstream-fixes' 2006-02-20 16:55:56 -05:00
Tejun Heo
cc1887f3d8 [PATCH] libata: fix qc->n_elem == 0 case handling in ata_qc_next_sg
This patch makes ata_for_each_sg() start with pad_sgent when
qc->n_elem is zero.  Previously, ata_for_each_sg() unconditionally
started with qc->__sg, handling the first sg to fill_sg() routines
even when the entry was invalid.  And while at it, unwind ?: in
ata_qc_next_sg() into if statement.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 16:48:18 -05:00
Jeff Garzik
ff60774859 Merge branch 'upstream' 2006-02-20 05:13:31 -05:00
Tejun Heo
6a62a04d47 [PATCH] libata: rename ata_dev_id_[c_]string()
This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string().
All other functions which read data from ATA ID data start with ata_id
and those two function names were getting too long.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 04:54:22 -05:00
Jeff Garzik
3875e1945b Merge branch 'upstream' 2006-02-13 00:13:48 -05:00
Tejun Heo
b00eec1d58 [PATCH] libata: add per-device max_sectors
If a low level driver wants to control max_sectors, it had to adjust
ap->host->max_sectors and set ATA_DFLAG_LOCK_SECTORS to tell
ata_scsi_slave_config not to override the limit.  This is not only
cumbersome but also incorrect for hosts which support more than one
devices per port.

This patch adds per-device ->max_sectors.  If the field is unset
(zero), libata core layer will adjust ->max_sectors according to
default rules.  If the field is set, libata honors the setting.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 14:36:30 -05:00
Tejun Heo
6e7846e9c5 [PATCH] libata: move cdb_len for host to device
cdb_len is per-device property.  Sharing cdb_len on ap results in
inaccurate configuration on revalidation and hotplugging.  This patch
makes cdb_len per-device.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 14:29:10 -05:00
Tejun Heo
0e949ff304 [PATCH] libata: implement ata_dev_id_c_string()
ata_dev_id_c_string() reads ATA string from the specified offset of
the given IDENTIFY PAGE and puts it in the specified buffer in trimmed
and NULL-terminated form.  The caller must supply a buffer which is
one byte larger than the maximum size of the target ID string.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 14:24:41 -05:00
Jeff Garzik
1cb9d721d9 Merge branch 'upstream' 2006-02-11 18:02:04 -05:00
Tejun Heo
bef4a456b8 [PATCH] libata: kill assert() macro
libata assert() now has no user left.  Kill it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11 17:51:57 -05:00
Tejun Heo
76014427e6 [PATCH] libata: inline ata_qc_complete()
This patch inlines ata_qc_complete() and uninlines __ata_qc_complete()
as suggested by Jeff Garzik.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-11 17:51:56 -05:00
Jeff Garzik
ca7d5e42d7 Merge branch 'upstream' 2006-02-10 07:09:37 -05:00
Tejun Heo
f29841e08f [PATCH] libata: implement ata_scsi_timed_out()
Implement ata_scsi_timed_out(), to be used as
scsi_host_template->eh_timed_out callback for all libata drivers.
Without this function, the following race exists.

If a qc completes after SCSI timer expires but before libata EH kicks
in, the qc gets completed but the scsicmd still gets passed to libata
EH resulting in ->eng_timeout invocation with NULL qc, which none is
handling properly.

This patch makes sure that scmd and qc share the same lifetime.
Original idea from Jeff Garzik <jgarzik@pobox.com>.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 06:50:46 -05:00
Tejun Heo
341963b909 [PATCH] libata: add ATA_QCFLAG_EH_SCHEDULED
Add ATA_QCFLAG_EH_SCHEDULED.  If this flag is set, the qc is owned by
EH and normal completion path is not allowed to finish it.  This patch
doesn't actually use this flag.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 06:50:45 -05:00
Jeff Garzik
99b3738fbf Merge branch 'upstream' 2006-02-09 04:28:13 -05:00
Tejun Heo
8a19ac89ed [PATCH] libata: implement ata_std_probeinit()
This patch implements the off-the-shelf probeinit component operation.
Currently, all it does is waking up the PHY if it's a SATA port.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-09 01:59:52 -05:00
Tejun Heo
7944ea9522 [PATCH] libata: add probeinit component operation to ata_drive_probe_reset()
This patch adds probeinit component operation to
ata_drive_probe_reset().  If present, this new operation is called
before performing any reset.  The operations's roll is to prepare @ap
for following probe-reset operations.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-09 01:59:52 -05:00
Tejun Heo
c18d06f89f [PATCH] libata: EH / pio tasks synchronization
This patch makes sure that pio tasks are flushed before proceeding
with EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-09 01:18:38 -05:00
Tejun Heo
dde44589bf [PATCH] libata: implement ATA_FLAG_IN_EH port flag
ATA_FLAG_IN_EH flag is set on entry to EH and cleared on completion.
This patch just sets and clears the flag.  Following patches will
build normal qc execution / EH synchronization aroung this flag.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-09 01:18:37 -05:00
Tejun Heo
c2bd58047b [PATCH] libata: implement standard reset component operations and ->probe_reset
Implement SRST, COMRESET and standard postreset component operations
for ata_drive_probe_reset(), and use these three functions to
implement ata_std_probe_reset.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27 20:58:34 -05:00
Tejun Heo
a62c0fc526 [PATCH] libata: implement ata_drive_probe_reset()
Most low level drivers share supported reset/classify actions and
sequence.  This patch implements ata_drive_probe_reset() which helps
constructing ->probe_reset from three component operations -
softreset, hardreset and postreset.  This minimizes duplicate code and
yet allows flexibility if needed. The three component operations can
also be shared by EH later.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27 20:58:34 -05:00
Jeff Garzik
f6ef65e6d0 Merge branch 'upstream-2.6.17' 2006-01-27 02:45:00 -05:00