We use the generic software counter infrastructure to provide
page fault events.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide generic software counter infrastructure that supports
software events.
This will be used to allow sample based profiling based on software
events such as pagefaults. The current infrastructure can only
provide a count of such events, no place information.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: ABI change
This expands several fields in the perf_counter_hw_event struct and adds
a "flags" argument to the perf_counter_open system call, in order that
features can be added in future without ABI changes.
In particular the record_type field is expanded to 64 bits, and the
space for flag bits has been expanded from 32 to 64 bits.
This also adds some new fields:
* read_format (64 bits) is intended to provide a way to specify what
userspace wants to get back when it does a read() on a simple
(non-interrupting) counter;
* exclude_idle (1 bit) provides a way for userspace to ask that events
that occur when the cpu is idle be excluded;
* extra_config_len will provide a way for userspace to supply an
arbitrary amount of extra machine-specific PMU configuration data
immediately following the perf_counter_hw_event struct, to allow
sophisticated users to program things such as instruction matching
CAMs and address range registers;
* __reserved_3 and __reserved_4 provide space for future expansion.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes three issues noticed by Arnd Bergmann:
- Add #ifdef __KERNEL__ and move some things around in perf_counter.h
to make sure only the bits that userspace needs are exported to
userspace.
- Use __u64, __s64, __u32 types in the structs exported to userspace
rather than u64, s64, u32.
- Make the sys_perf_counter_open syscall available to the SPUs on
Cell platforms.
And one issue that I noticed in looking at the code again:
- Wrap the perf_counter_open syscall with SYSCALL_DEFINE4 so we get
the proper handling of int arguments on ppc64 (and some other 64-bit
architectures).
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Jaswinder Singh Rajput reported that commit 23a185ca8a caused the
context switch and migration software counters to report zero always.
With that commit, the software counters only count events that occur
between sched-in and sched-out for a task. This is necessary for the
counter enable/disable prctls and ioctls to work. However, the
context switch and migration counts are incremented after sched-out
for one task and before sched-in for the next. Since the increment
doesn't occur while a task is scheduled in (as far as the software
counters are concerned) it doesn't count towards any counter.
Thus the context switch and migration counters need to count events
that occur at any time, provided the counter is enabled, not just
those that occur while the task is scheduled in (from the perf_counter
subsystem's point of view). The problem though is that the software
counter code can't tell the difference between being enabled and being
scheduled in, and between being disabled and being scheduled out,
since we use the one pair of enable/disable entry points for both.
That is, the high-level disable operation simply arranges for the
counter to not be scheduled in any more, and the high-level enable
operation arranges for it to be scheduled in again.
One way to solve this would be to have sched_in/out operations in the
hw_perf_counter_ops struct as well as enable/disable. However, this
takes a simpler approach: it adds a 'prev_state' field to the
perf_counter struct that allows a counter's enable method to know
whether the counter was previously disabled or just inactive
(scheduled out), and therefore whether the enable method is being
called as a result of a high-level enable or a schedule-in operation.
This then allows the context switch, migration and page fault counters
to reset their hw.prev_count value in their enable functions only if
they are called as a result of a high-level enable operation.
Although page faults would normally only occur while the counter is
scheduled in, this changes the page fault counter code too in case
there are ever circumstances where page faults get counted against a
task while its counters are not scheduled in.
Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only free child_counter if it has a parent; if it doesn't, then it
has a file pointing to it and we'll free it in perf_release.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new perf_counter feature
This extends the perf_counter_hw_event struct with bits that specify
that events in user, kernel and/or hypervisor mode should not be
counted (i.e. should be excluded), and adds code to program the PMU
mode selection bits accordingly on x86 and powerpc.
For software counters, we don't currently have the infrastructure to
distinguish which mode an event occurs in, so we currently fail the
counter initialization if the setting of the hw_event.exclude_* bits
would require us to distinguish. Context switches and CPU migrations
are currently considered to occur in kernel mode.
On x86, this changes the previous policy that only root can count
kernel events. Now non-root users can count kernel events or exclude
them. Non-root users still can't use NMI events, though. On x86 we
don't appear to have any way to control whether hypervisor events are
counted or not, so hw_event.exclude_hv is ignored.
On powerpc, the selection of whether to count events in user, kernel
and/or hypervisor mode is PMU-wide, not per-counter, so this adds a
check that the hw_event.exclude_* settings are the same as other events
on the PMU. Counters being added to a group have to have the same
settings as the other hardware counters in the group. Counters and
groups can only be enabled in hw_perf_group_sched_in or power_perf_enable
if they have the same settings as any other counters already on the
PMU. If we are not running on a hypervisor, the exclude_hv setting
is ignored (by forcing it to 0) since we can't ever get any
hypervisor events.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
don't kfree in use counters.
Running...
while true; do perfstat -e 1 -c true; done
...on all cores for a while doesn't seem to be eating ram, and my oops
is gone.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: New perf_counter features
This primarily adds a way for perf_counter users to enable and disable
counters and groups. Enabling or disabling a counter or group also
enables or disables all of the child counters that have been cloned
from it to monitor children of the task monitored by the top-level
counter. The userspace interface to enable/disable counters is via
ioctl on the counter file descriptor.
Along the way this extends the code that handles child counters to
handle child counter groups properly. A group with multiple counters
will be cloned to child tasks if and only if the group leader has the
hw_event.inherit bit set - if it is set the whole group is cloned as a
group in the child task.
In order to be able to enable or disable all child counters of a given
top-level counter, we need a way to find them all. Hence I have added
a child_list field to struct perf_counter, which is the head of the
list of children for a top-level counter, or the link in that list for
a child counter. That list is protected by the perf_counter.mutex
field.
This also adds a mutex to the perf_counter_context struct. Previously
the list of counters was protected just by the lock field in the
context, which meant that perf_counter_init_task had to take that lock
and then take whatever lock/mutex protects the top-level counter's
child_list. But the counter enable/disable functions need to take
that lock in order to traverse the list, then for each counter take
the lock in that counter's context in order to change the counter's
state safely, which will lead to a deadlock.
To solve this, we now have both a mutex and a spinlock in the context,
and taking either is sufficient to ensure the list of counters can't
change - you have to take both before changing the list. Now
perf_counter_init_task takes the mutex instead of the lock (which
incidentally means that inherit_counter can use GFP_KERNEL instead of
GFP_ATOMIC) and thus avoids the possible deadlock. Similarly the new
enable/disable functions can take the mutex while traversing the list
of child counters without incurring a possible deadlock when the
counter manipulation code locks the context for a child counter.
We also had an misfeature that the first counter added to a context
would possibly not go on until the next sched-in, because we were
using ctx->nr_active to detect if the context was running on a CPU.
But nr_active is the number of active counters, and if that was zero
(because the context didn't have any counters yet) it would look like
the context wasn't running on a cpu and so the retry code in
__perf_install_in_context wouldn't retry. So this adds an 'is_active'
field that is set when the context is on a CPU, even if it has no
counters. The is_active field is only used for task contexts, not for
per-cpu contexts.
If we enable a subsidiary counter in a group that is active on a CPU,
and the arch code can't enable the counter, then we have to pull the
whole group off the CPU. We do this with group_sched_out, which gets
moved up in the file so it comes before all its callers. This also
adds similar logic to __perf_install_in_context so that the "all on,
or none" invariant of groups is preserved when adding a new counter to
a group.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Impact: New perf_counter features
A pinned counter group is one that the user wants to have on the CPU
whenever possible, i.e. whenever the associated task is running, for
a per-task group, or always for a per-cpu group. If the system
cannot satisfy that, it puts the group into an error state where
it is not scheduled any more and reads from it return EOF (i.e. 0
bytes read). The group can be released from error state and made
readable again using prctl(PR_TASK_PERF_COUNTERS_ENABLE). When we
have finer-grained enable/disable controls on counters we'll be able
to reset the error state on individual groups.
An exclusive group is one that the user wants to be the only group
using the CPU performance monitor hardware whenever it is on. The
counter group scheduler will not schedule an exclusive group if there
are already other groups on the CPU and will not schedule other groups
onto the CPU if there is an exclusive group scheduled (that statement
does not apply to groups containing only software counters, which can
always go on and which do not prevent an exclusive group from going on).
With an exclusive group, we will be able to let users program PMU
registers at a low level without the concern that those settings will
perturb other measurements.
Along the way this reorganizes things a little:
- is_software_counter() is moved to perf_counter.h.
- cpuctx->active_oncpu now records the number of hardware counters on
the CPU, i.e. it now excludes software counters. Nothing was reading
cpuctx->active_oncpu before, so this change is harmless.
- A new cpuctx->exclusive field records whether we currently have an
exclusive group on the CPU.
- counter_sched_out moves higher up in perf_counter.c and gets called
from __perf_counter_remove_from_context and __perf_counter_exit_task,
where we used to have essentially the same code.
- __perf_counter_sched_in now goes through the counter list twice, doing
the pinned counters in the first loop and the non-pinned counters in
the second loop, in order to give the pinned counters the best chance
to be scheduled in.
Note that only a group leader can be exclusive or pinned, and that
attribute applies to the whole group. This avoids some awkwardness in
some corner cases (e.g. where a group leader is closed and the other
group members get added to the context list). If we want to relax that
restriction later, we can, and it is easier to relax a restriction than
to apply a new one.
This doesn't yet handle the case where a pinned counter is inherited
and goes into error state in the child - the error state is not
propagated up to the parent when the child exits, and arguably it
should.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes sure that we call the platform-specific ppc_md.enable_pmcs
function on each CPU before we try to use the PMU on that CPU. If the
CPU goes off-line and then on-line, we need to do the enable_pmcs call
again, so we use the hw_perf_counter_setup hook to ensure that. It gets
called as each CPU comes online, but it isn't called on the CPU that is
coming up, so this adds the CPU number as an argument to it (there were
no non-empty instances of hw_perf_counter_setup before).
This also arranges to set the pmcregs_in_use field of the lppaca (data
structure shared with the hypervisor) on each CPU when we are using the
PMU and clear it when we are not. This allows the hypervisor to optimize
partition switches by not saving/restoring the PMU registers when we
aren't using the PMU.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Software counters aren't subject to the limitations imposed by the
fixed number of hardware counter registers, so there is no reason not
to enable them all in __perf_counter_sched_in. Previously we used to
break out of the loop when we got to a group that wouldn't fit on the
PMU; with this we continue through the list but only schedule in
software counters (or groups containing only software counters) from
there on.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Impact: minimize requirements on architectures
Currently, an architecture just enabling CONFIG_PERF_COUNTERS but not
providing any extra functions will fail to build with
perf_counter_print_debug being undefined, since we don't provide an
empty dummy definition like we do with the hw_perf_* functions.
This provides an empty dummy perf_counter_print_debug() to make it
easier for architectures to turn on CONFIG_PERF_COUNTERS.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Impact: extend perf_counter infrastructure
This adds an optional hw_perf_group_sched_in() arch function that enables
a whole group of counters in one go. It returns 1 if it added the group
successfully, 0 if it did nothing (and therefore the core needs to add
the counters individually), or a negative number if an error occurred.
It should add all the counters and enable any software counters in the
group, or else add none of them and return an error.
There are a couple of related changes/improvements in the group handling
here:
* As an optimization, group_sched_out() and group_sched_in() now check the
state of the group leader, and do nothing if the leader is not active
or disabled.
* We now call hw_perf_save_disable/hw_perf_restore around the complete
set of counter enable/disable calls in __perf_counter_sched_in/out,
to give the arch code the opportunity to defer updating the hardware
state until the hw_perf_restore call if it wants.
* We no longer stop adding groups after we get to a group that has more
than one counter. We will ultimately add an option for a group to be
exclusive. The current code doesn't really implement exclusive groups
anyway, since a group could end up going on with other counters that
get added before it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Impact: bug fix
Currently if you do (e.g.) timec -e -1 ls, it will report 0 for the
value of the cpu_clock counter. The reason is that the core assumes
that a counter's count field is up-to-date when the counter is inactive,
and doesn't call the counter's read function. However, the cpu_clock
counter code only updates the count in the read function.
This fixes it by making both the read and disable functions update the
count. It also makes the counter ignore time passing while the counter
is disabled, by making the enable function update the hw.prev_count field.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Impact: fix oops-causing bug
Currently, if you try to use perf_counters on an architecture that has
no hardware support, and you select an event that doesn't map to any of
the defined software counters, you get an oops rather than an error.
This is because the dummy hw_perf_counter_init returns ERR_PTR(-EINVAL)
but the caller (perf_counter_alloc) only tests for NULL.
This makes the dummy hw_perf_counter_init return NULL instead.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Impact: fix panic possible panic
Some versions of GCC inline the weak global function if it's empty.
Add a barrier() to work it around.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up and refactor code
refactor the counter scheduler: separate out in/out functions and
introduce a counter-rotation function as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove dead code
nr_inherited was not maintained correctly (not decremented) - and also
not used - remove it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Allow lowlevel ->enable() op to return an error if a counter can not be
added. This can be used to handle counter constraints.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: schedule in groups atomically
If there are multiple groups in a task, make sure they are scheduled
in and out atomically.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: implement default-off counters
Make sure that counters that are created with counter.hw_event.disabled=1,
get created in disabled state.
They can be enabled via:
prctl(PR_TASK_PERF_COUNTERS_ENABLE);
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If counters are exiting via do_exit() not via filp close, then
the CPU context needs to be released - otherwise future percpu
counter creations might fail.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new feature, new sw counter
Add a counter that counts the number of pagefaults a task
is experiencing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new feature, new sw counter
Add a counter that counts the number of cross-CPU migrations a
task is suffering.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new feature, new sw counter
Add a counter that counts the number of context-switches a task
is doing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: implement new performance feature
Counter inheritance can be used to run performance counters in a workload,
transparently - and pipe back the counter results to the parent counter.
Inheritance for performance counters works the following way: when creating
a counter it can be marked with the .inherit=1 flag. Such counters are then
'inherited' by all child tasks (be they fork()-ed or clone()-ed). These
counters get inherited through exec() boundaries as well (except through
setuid boundaries).
The counter values get added back to the parent counter(s) when the child
task(s) exit - much like stime/utime statistics are gathered. So inherited
counters are ideal to gather summary statistics about an application's
behavior via shell commands, without having to modify that application.
The timec.c command utilizes counter inheritance:
http://redhat.com/~mingo/perfcounters/timec.c
Sample output:
$ ./timec -e 1 -e 3 -e 5 ls -lR /usr/include/ >/dev/null
Performance counter stats for 'ls':
163516953 instructions
2295 cache-misses
2855182 branch-misses
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: restructure code
Change counter math from absolute values to clear delta logic.
We try to extract elapsed deltas from the raw hw counter - and put
that into the generic counter.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Introduce a proper enum for the 3 states of a counter:
PERF_COUNTER_STATE_OFF = -1
PERF_COUNTER_STATE_INACTIVE = 0
PERF_COUNTER_STATE_ACTIVE = 1
and rename counter->active to counter->state and propagate the
changes everywhere.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a way for self-monitoring tasks to disable/enable counters summarily,
via a prctl:
PR_TASK_PERF_COUNTERS_DISABLE 31
PR_TASK_PERF_COUNTERS_ENABLE 32
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new perf-counter type
The 'task clock' counter counts the amount of time a task is executing,
in nanoseconds. It stops ticking when a task is scheduled out either due
to it blocking, sleeping or it being preempted.
This counter type is a Linux kernel based abstraction, it is available
even if the hardware does not support native hardware performance counters.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Rename them to better match up the usual IRQ disable/enable APIs:
hw_perf_disable_all() => hw_perf_save_disable()
hw_perf_restore_ctrl() => hw_perf_restore()
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new perf-counter type
The 'CPU clock' counter counts the amount of CPU clock time that is
elapsing, in nanoseconds. (regardless of how much of it the task is
spending on a CPU executing)
This counter type is a Linux kernel based abstraction, it is available
even if the hardware does not support native hardware performance counters.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: restructure code, introduce hw_ops driver abstraction
Introduce this abstraction to handle counter details:
struct hw_perf_counter_ops {
void (*hw_perf_counter_enable) (struct perf_counter *counter);
void (*hw_perf_counter_disable) (struct perf_counter *counter);
void (*hw_perf_counter_read) (struct perf_counter *counter);
};
This will be useful to support assymetric hw details, and it will also
be useful to implement "software counters". (Counters that count kernel
managed sw events such as pagefaults, context-switches, wall-clock time
or task-local time.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: bugfix
Check that a group does not span outside the context of a CPU or a task.
Also, do not allow deep recursive hierarchies.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add group counters
This patch adds the "counter groups" abstraction.
Groups of counters behave much like normal 'single' counters, with a
few semantic and behavioral extensions on top of that.
A counter group is created by creating a new counter with the open()
syscall's group-leader group_fd file descriptor parameter pointing
to another, already existing counter.
Groups of counters are scheduled in and out in one atomic group, and
they are also roundrobin-scheduled atomically.
Counters that are member of a group can also record events with an
(atomic) extended timestamp that extends to all members of the group,
if the record type is set to PERF_RECORD_GROUP.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up new API
Thorough cleanup of the new perf counters API, we now get clean separation
of the various concepts:
- introduce perf_counter_hw_event to separate out the event source details
- move special type flags into separate attributes: PERF_COUNT_NMI,
PERF_COUNT_RAW
- extend the type to u64 and reserve it fully to the architecture in the
raw type case.
And make use of all these changes in the core and x86 perfcounters code.
Also change the syscall signature to:
asmlinkage int sys_perf_counter_open(
struct perf_counter_hw_event *hw_event_uptr __user,
pid_t pid,
int cpu,
int group_fd);
( Note that group_fd is unused for now - it's reserved for the counter
groups abstraction. )
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change syscall, cleanup
Make use of the new perf_counters event type.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement the core kernel bits of Performance Counters subsystem.
The Linux Performance Counter subsystem provides an abstraction of
performance counter hardware capabilities. It provides per task and per
CPU counters, and it provides event capabilities on top of those.
Performance counters are accessed via special file descriptors.
There's one file descriptor per virtual counter used.
The special file descriptor is opened via the perf_counter_open()
system call:
int
perf_counter_open(u32 hw_event_type,
u32 hw_event_period,
u32 record_type,
pid_t pid,
int cpu);
The syscall returns the new fd. The fd can be used via the normal
VFS system calls: read() can be used to read the counter, fcntl()
can be used to set the blocking mode, etc.
Multiple counters can be kept open at a time, and the counters
can be poll()ed.
See more details in Documentation/perf-counters.txt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
