Properly document the variable-size structure tricks we are doing
wrt. struct sched_group and sched_domain, and use the field[0] GCC
extension instead of defining a vla array.
Dont use unions for this, as pointed out by Linus.
[ Impact: cleanup, un-confuse Sparse and LLVM ]
Reported-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.01.0905180850110.3301@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
avenrun is an rough estimate so we don't have to worry about
consistency of the three avenrun values. Remove the xtime lock
dependency and provide a function to scale the values. Cleanup the
users.
[ Impact: cleanup ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Dimitri Sivanich noticed that xtime_lock is held write locked across
calc_load() which iterates over all online CPUs. That can cause long
latencies for xtime_lock readers on large SMP systems.
The load average calculation is an rough estimate anyway so there is
no real need to protect the readers vs. the update. It's not a problem
when the avenrun array is updated while a reader copies the values.
Instead of iterating over all online CPUs let the scheduler_tick code
update the number of active tasks shortly before the avenrun update
happens. The avenrun update itself is handled by the CPU which calls
do_timer().
[ Impact: reduce xtime_lock write locked section ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:
This patch migrates all non pinned timers and hrtimers to the current
idle load balancer, from all the idle CPUs. Timers firing on busy CPUs
are not migrated.
While migrating hrtimers, care should be taken to check if migrating
a hrtimer would result in a latency or not. So we compare the expiry of the
hrtimer with the next timer interrupt on the target cpu and migrate the
hrtimer only if it expires *after* the next interrupt on the target cpu.
So, added a clockevents_get_next_event() helper function to return the
next_event on the target cpu's clock_event_device.
[ tglx: cleanups and simplifications ]
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:
This patch creates the /proc/sys sysctl interface at
/proc/sys/kernel/timer_migration
Timer migration is enabled by default.
To disable timer migration, when CONFIG_SCHED_DEBUG = y,
echo 0 > /proc/sys/kernel/timer_migration
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:
The following pinned hrtimers have been identified and marked:
1)sched_rt_period_timer
2)tick_sched_timer
3)stack_trace_timer_fn
[ tglx: fixup the hrtimer pinned mode ]
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Conflicts:
arch/frv/include/asm/pgtable.h
arch/x86/include/asm/required-features.h
arch/x86/xen/mmu.c
Merge reason: x86/xen was on a .29 base still, move it to a fresher
branch and pick up Xen fixes as well, plus resolve
conflicts
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: this topic is ready for upstream now. It passed
Oleg's review and Andrew had no further mm/*
objections/observations either.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
on a handful of tracing fixes present in .30-rc5-almost.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a thread is oom killed and fails to exit, it's helpful to know which
threads have access to memory reserves if the machine livelocks. This is
done by testing for the TIF_MEMDIE thread info flag and should be
displayed alongside stack traces to identify tasks that have access to
such reserves but are still stuck allocating pages, for instance.
It would probably be helpful in other cases as well, so all thread info
flags are emitted when showing a task.
( v2: fix warning reported by Stephen Rothwell )
[ Impact: extend debug printout info ]
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
LKML-Reference: <alpine.DEB.2.00.0905040136390.15831@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The orig_cpu parameter in trace_sched_migrate_task() is not necessary,
it can be got by using task_cpu(p) in the probe.
[ Impact: micro-optimization ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
[ modified from Mathieu's patch. The original patch is at:
http://marc.info/?l=linux-kernel&m=123791201716239&w=2 ]
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: zhaolei@cn.fujitsu.com
Cc: laijs@cn.fujitsu.com
LKML-Reference: <49FFFDB7.1050402@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas noted that we should disallow sysctl_sched_rt_runtime == 0 for
(!RT_GROUP) since the root group always has some RT tasks in it.
Further, update the documentation to inspire clue.
[ Impact: exclude corner-case sysctl_sched_rt_runtime value ]
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090505155436.863098054@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
percpu scheduling for perfcounters wants to take the context lock,
but that lock first needs to be initialized. Currently it is an
early_initcall() - but that is too late, the task tick runs much
sooner than that.
Call it explicitly from the scheduler init sequence instead.
[ Impact: fix access-before-init crash ]
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Andrew Gallatin reported that IRQ and SOFTIRQ times were
sometime not reported correctly on recent kernels, and even
bisected to commit 457533a7d3
([PATCH] fix scaled & unscaled cputime accounting) as the first
bad commit.
Further analysis pointed that commit
79741dd357 ([PATCH] idle cputime
accounting) was the real cause of the problem.
account_process_tick() was not taking into account timer IRQ
interrupting the idle task servicing a hard or soft irq.
On mostly idle cpu, irqs were thus not accounted and top or
mpstat could tell user/admin that cpu was 100 % idle, 0.00 %
irq, 0.00 % softirq, while it was not.
[ Impact: fix occasionally incorrect CPU statistics in top/mpstat ]
Reported-by: Andrew Gallatin <gallatin@myri.com>
Re-reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: rick.jones2@hp.com
Cc: brice@myri.com
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <49F84BC1.7080602@cosmosbay.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a section to the memory barriers document to note the implied
memory barriers of sleep primitives (set_current_state() and wrappers)
and wake-up primitives (wake_up() and co.).
Also extend the in-code comments on the wake_up() functions to note
these implied barriers.
[ Impact: add documentation ]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20090428140138.1192.94723.stgit@warthog.procyon.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/ptrace.c
Merge reason: fix the conflict above, and also pick up the CONFIG_BROKEN
dependency change from upstream so that we can remove it
here.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Stephen Rothwell reported this build warning:
> kernel/sched.c: In function 'find_new_ilb':
> kernel/sched.c:4355: warning: passing argument 1 of '__first_cpu' from incompatible pointer type
>
> Possibly caused by commit f711f6090a
> ("sched: Nominate idle load balancer from a semi-idle package") from
> the sched tree. Should this call to first_cpu be cpumask_first?
For !(CONFIG_SCHED_MC || CONFIG_SCHED_SMT), find_new_ilb() nominates the
Idle load balancer as the first cpu from the nohz.cpu_mask.
This code uses the older API first_cpu(). Replace it with cpumask_first(),
which is the correct API here.
[ Impact: cleanup, address build warning ]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <20090421031049.GA4140@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lai Jiangshan's patch reminded me that I promised Nick to remove
that extra call overhead in schedule().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090313112300.927414207@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This function was left orphan by the latest round of sw-counter
cleanups.
[ Impact: remove unused kernel function ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 46e0bb9c12 ("sched: Print sched_group::__cpu_power
in sched_domain_debug") produces a messy dmesg output while
attempting to print the sched_group::__cpu_power for each
group in the sched_domain hierarchy.
Fix this by avoid printing the __cpu_power for default cases.
(i.e, __cpu_power == SCHED_LOAD_SCALE).
[ Impact: reduce syslog clutter ]
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Fixed-by: Tony Luck <tony.luck@intel.com>
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <20090414033936.GA534@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch lowers the number of places a developer must modify to add
new tracepoints. The current method to add a new tracepoint
into an existing system is to write the trace point macro in the
trace header with one of the macros TRACE_EVENT, TRACE_FORMAT or
DECLARE_TRACE, then they must add the same named item into the C file
with the macro DEFINE_TRACE(name) and then add the trace point.
This change cuts out the needing to add the DEFINE_TRACE(name).
Every file that uses the tracepoint must still include the trace/<type>.h
file, but the one C file must also add a define before the including
of that file.
#define CREATE_TRACE_POINTS
#include <trace/mytrace.h>
This will cause the trace/mytrace.h file to also produce the C code
necessary to implement the trace point.
Note, if more than one trace/<type>.h is used to create the C code
it is best to list them all together.
#define CREATE_TRACE_POINTS
#include <trace/foo.h>
#include <trace/bar.h>
#include <trace/fido.h>
Thanks to Mathieu Desnoyers and Christoph Hellwig for coming up with
the cleaner solution of the define above the includes over my first
design to have the C code include a "special" header.
This patch converts sched, irq and lockdep and skb to use this new
method.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
'777c6c5 wait: prevent exclusive waiter starvation' made
__wake_up_common() global to be used from abort_exclusive_wait().
It was needed to do a wake-up with the waitqueue lock held while
passing down a key to the wake-up function.
Since '4ede816 epoll keyed wakeups: add __wake_up_locked_key() and
__wake_up_sync_key()' there is an appropriate wrapper for this case:
__wake_up_locked_key().
Use it here and make __wake_up_common() private to the scheduler
again.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1239720785-19661-1-git-send-email-hannes@cmpxchg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The CPU that first goes idle becomes the idle-load-balancer and remains
that until either it picks up a task or till all the CPUs of the system
goes idle.
Optimize this further to allow it to relinquish it's post
once all it's siblings in the power-aware sched_domain go idle, thereby
allowing the whole package-core to go idle. While relinquising the post,
nominate another an idle-load balancer from a semi-idle core/package.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090414045535.7645.31641.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently the nomination of idle-load balancer is done by choosing the first
idle cpu in the nohz.cpu_mask. This may not be power-efficient, since
such an idle cpu could come from a completely idle core/package thereby
preventing the whole core/package from being in a low-power state.
For eg, consider a quad-core dual package system. The cpu numbering need
not be sequential and can something like [0, 2, 4, 6] and [1, 3, 5, 7].
With sched_mc/smt_power_savings and the power-aware IRQ balance, we try to keep
as fewer Packages/Cores active. But the current idle load balancer logic
goes against this by choosing the first_cpu in the nohz.cpu_mask and not
taking the system topology into consideration.
Improve the algorithm to nominate the idle load balancer from a semi idle
cores/packages thereby increasing the probability of the cores/packages being
in deeper sleep states for longer duration.
The algorithm is activated only when sched_mc/smt_power_savings != 0.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090414045530.7645.12175.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove overly redundant tracing entries
When tracer is "function" or "function_graph", way too much
"get_parent_ip" entries are recorded in ring_buffer.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49D458B1.5000703@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* commit 'origin/master': (4825 commits)
Fix build errors due to CONFIG_BRANCH_TRACER=y
parport: Use the PCI IRQ if offered
tty: jsm cleanups
Adjust path to gpio headers
KGDB_SERIAL_CONSOLE check for module
Change KCONFIG name
tty: Blackin CTS/RTS
Change hardware flow control from poll to interrupt driven
Add support for the MAX3100 SPI UART.
lanana: assign a device name and numbering for MAX3100
serqt: initial clean up pass for tty side
tty: Use the generic RS485 ioctl on CRIS
tty: Correct inline types for tty_driver_kref_get()
splice: fix deadlock in splicing to file
nilfs2: support nanosecond timestamp
nilfs2: introduce secondary super block
nilfs2: simplify handling of active state of segments
nilfs2: mark minor flag for checkpoint created by internal operation
nilfs2: clean up sketch file
nilfs2: super block operations fix endian bug
...
Conflicts:
arch/x86/include/asm/thread_info.h
arch/x86/lguest/boot.c
drivers/xen/manage.c
Add a function to wait until some other task has been
switched out at least once.
This differs from wait_task_inactive() subtly, in that the
latter will wait until the task has left the CPU.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Cc: markus.t.metzger@gmail.com
Cc: roland@redhat.com
Cc: eranian@googlemail.com
Cc: oleg@redhat.com
Cc: juan.villacis@intel.com
Cc: ak@linux.jf.intel.com
LKML-Reference: <20090403144549.794157000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that all the task runtime clock users are gone, remove the ugly
rq->lock usage from perf counters, which solves the nasty deadlock
seen when a software task clock counter was read from an NMI overflow
context.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <20090406094518.531137582@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Use the generic software events for context switches.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Orig-LKML-Reference: <20090319194233.283522645@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: we have gathered quite a few conflicts, need to merge upstream
Conflicts:
arch/powerpc/kernel/Makefile
arch/x86/ia32/ia32entry.S
arch/x86/include/asm/hardirq.h
arch/x86/include/asm/unistd_32.h
arch/x86/include/asm/unistd_64.h
arch/x86/kernel/cpu/common.c
arch/x86/kernel/irq.c
arch/x86/kernel/syscall_table_32.S
arch/x86/mm/iomap_32.c
include/linux/sched.h
kernel/Makefile
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
tracing, net: fix net tree and tracing tree merge interaction
tracing, powerpc: fix powerpc tree and tracing tree interaction
ring-buffer: do not remove reader page from list on ring buffer free
function-graph: allow unregistering twice
trace: make argument 'mem' of trace_seq_putmem() const
tracing: add missing 'extern' keywords to trace_output.h
tracing: provide trace_seq_reserve()
blktrace: print out BLK_TN_MESSAGE properly
blktrace: extract duplidate code
blktrace: fix memory leak when freeing struct blk_io_trace
blktrace: fix blk_probes_ref chaos
blktrace: make classic output more classic
blktrace: fix off-by-one bug
blktrace: fix the original blktrace
blktrace: fix a race when creating blk_tree_root in debugfs
blktrace: fix timestamp in binary output
tracing, Text Edit Lock: cleanup
tracing: filter fix for TRACE_EVENT_FORMAT events
ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
x86: kretprobe-booster interrupt emulation code fix
...
Fix up trivial conflicts in
arch/parisc/include/asm/ftrace.h
include/linux/memory.h
kernel/extable.c
kernel/module.c
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
cpumask: remove cpumask allocation from idle_balance, fix
numa, cpumask: move numa_node_id default implementation to topology.h, fix
cpumask: remove cpumask allocation from idle_balance
x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
x86: microcode: cleanup
x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
numa, cpumask: move numa_node_id default implementation to topology.h
cpumask: convert node_to_cpumask_map[] to cpumask_var_t
cpumask: remove x86 cpumask_t uses.
cpumask: use cpumask_var_t in uv_flush_tlb_others.
cpumask: remove cpumask_t assignment from vector_allocation_domain()
cpumask: make Xen use the new operators.
cpumask: clean up summit's send_IPI functions
cpumask: use new cpumask functions throughout x86
x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
cpumask: convert node_to_cpumask_map[] to cpumask_var_t
x86: unify 32 and 64-bit node_to_cpumask_map
...
* 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
s390: remove arch specific smp_send_stop()
panic: clean up kernel/panic.c
panic, smp: provide smp_send_stop() wrapper on UP too
panic: decrease oops_in_progress only after having done the panic
generic-ipi: eliminate WARN_ON()s during oops/panic
generic-ipi: cleanups
generic-ipi: remove CSD_FLAG_WAIT
generic-ipi: remove kmalloc()
generic IPI: simplify barriers and locking
This patchset introduces wakeup hints for some of the most popular (from
epoll POV) devices, so that epoll code can avoid spurious wakeups on its
waiters.
The problem with epoll is that the callback-based wakeups do not, ATM,
carry any information about the events the wakeup is related to. So the
only choice epoll has (not being able to call f_op->poll() from inside the
callback), is to add the file* to a ready-list and resolve the real events
later on, at epoll_wait() (or its own f_op->poll()) time. This can cause
spurious wakeups, since the wake_up() itself might be for an event the
caller is not interested into.
The rate of these spurious wakeup can be pretty high in case of many
network sockets being monitored.
By allowing devices to report the events the wakeups refer to (at least
the two major classes - POLLIN/POLLOUT), we are able to spare useless
wakeups by proper handling inside the epoll's poll callback.
Epoll will have in any case to call f_op->poll() on the file* later on,
since the change to be done in order to have the full event set sent via
wakeup, is too invasive for the way our f_op->poll() system works (the
full event set is calculated inside the poll function - there are too many
of them to even start thinking the change - also poll/select would need
change too).
Epoll is changed in a way that both devices which send event hints, and
the ones that don't, are correctly handled. The former will gain some
efficiency though.
As a general rule for devices, would be to add an event mask by using
key-aware wakeup macros, when making up poll wait queues. I tested it
(together with the epoll's poll fix patch Andrew has in -mm) and wakeups
for the supported devices are correctly filtered.
Test program available here:
http://www.xmailserver.org/epoll_test.c
This patch:
Nothing revolutionary here. Just using the available "key" that our
wakeup core already support. The __wake_up_locked_key() was no brainer,
since both __wake_up_locked() and __wake_up_locked_key() are thin wrappers
around __wake_up_common().
The __wake_up_sync() function had a body, so the choice was between
borrowing the body for __wake_up_sync_key() and calling it from
__wake_up_sync(), or make an inline and calling it from both. I chose the
former since in most archs it all resolves to "mov $0, REG; jmp ADDR".
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: William Lee Irwin III <wli@movementarian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: extend debug info /proc/sched_debug
If the user changes the value of the sched_mc/smt_power_savings sysfs
tunable, it'll trigger a rebuilding of the whole sched_domain tree,
with the SD_POWERSAVINGS_BALANCE flag set at certain levels.
As a result, there would be a change in the __cpu_power of sched_groups
in the sched_domain hierarchy.
Print the __cpu_power values for each sched_group in sched_domain_debug
to help verify this change and correlate it with the change in the
load-balancing behavior.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090330045520.2869.24777.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add per-cgroup cpuacct controller statistics like the system and user
time consumed by the group of tasks.
Changelog:
v7
- Changed the name of the statistic from utime to user and from stime to
system so that in future we could easily add other statistics like irq,
softirq, steal times etc easily.
v6
- Fixed a bug in the error path of cpuacct_create() (pointed by Li Zefan).
v5
- In cpuacct_stats_show(), use cputime64_to_clock_t() since we are
operating on a 64bit variable here.
v4
- Remove comments in cpuacct_update_stats() which explained why rcu_read_lock()
was needed (as per Peter Zijlstra's review comments).
- Don't say that percpu_counter_read() is broken in Documentation/cpuacct.txt
as per KAMEZAWA Hiroyuki's review comments.
v3
- Fix a small race in the cpuacct hierarchy walk.
v2
- stime and utime now exported in clock_t units instead of msecs.
- Addressed the code review comments from Balbir and Li Zefan.
- Moved to -tip tree.
v1
- Moved the stime/utime accounting to cpuacct controller.
Earlier versions
- http://lkml.org/lkml/2009/2/25/129
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
LKML-Reference: <20090331043222.GA4093@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Regression fix (against clock_gettime() backwarding bug)
This patch re-introduces a couple of functions, task_sched_runtime
and thread_group_sched_runtime, which was once removed at the
time of 2.6.28-rc1.
These functions protect the sampling of thread/process clock with
rq lock. This rq lock is required not to update rq->clock during
the sampling.
i.e.
The clock_gettime() may return
((accounted runtime before update) + (delta after update))
that is less than what it should be.
v2 -> v3:
- Rename static helper function __task_delta_exec()
to do_task_delta_exec() since -tip tree already has
a __task_delta_exec() of different version.
v1 -> v2:
- Revises comments of function and patch description.
- Add note about accuracy of thread group's runtime.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org [2.6.28.x][2.6.29.x]
LKML-Reference: <49D1CC93.4080401@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix cgroups race under rcu-preempt
cpuacct_charge() obtains task's ca and does a hierarchy walk upwards.
This can race with the task's movement between cgroups. This race
can cause an access to freed ca pointer in cpuacct_charge() or access
to invalid cgroups pointer of the task. This will not happen with rcu or
tree rcu as cpuacct_charge() is called with preemption disabled. However if
rcupreempt is used, the race is seen. Thanks to Li Zefan for explaining this.
Fix this race by explicitly protecting ca and the hierarchy walk with
rcu_read_lock().
Changes for v2:
- Update patch descrition (as per Li Zefan's review comments).
- Remove comments in cpuacct_charge() which explained why rcu_read_lock()
was needed (as per Peter Zijlstra's review comments).
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It appears I inadvertly introduced rq->lock recursion to the
hrtimer_start() path when I delegated running already expired
timers to softirq context.
This patch fixes it by introducing a __hrtimer_start_range_ns()
method that will not use raise_softirq_irqoff() but
__raise_softirq_irqoff() which avoids the wakeup.
It then also changes schedule() to check for pending softirqs and
do the wakeup then, I'm not quite sure I like this last bit, nor
am I convinced its really needed.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
LKML-Reference: <20090313112301.096138802@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix lazy context switch API
Pass the previous and next tasks into the context switch start
end calls, so that the called functions can properly access the
task state (esp in end_context_switch, in which the next task
is not yet completely current).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Impact: simplification, prepare for later changes
Make lazy cpu mode more specific to context switching, so that
it makes sense to do more context-switch specific things in
the callbacks.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fix kernel-doc errors in sched.c: the structs don't have
kernel-doc notation and the short function description needs to
be one line only.
Error(kernel/sched.c:3197): cannot understand prototype: 'struct sd_lb_stats '
Error(kernel/sched.c:3228): cannot understand prototype: 'struct sg_lb_stats '
Error(kernel/sched.c:3375): duplicate section name 'Description'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Impact: cleanup
Add /** style comments around find_busiest_group(). Also add a few
explanatory comments.
This concludes the find_busiest_group() cleanup. The function is
now down to 72 lines from the original 313 lines.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091427.13992.18933.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create seperate helper functions to initialize the
power-savings-balance related variables, to update them and
to check if we have a scope for performing power-savings balance.
Add no-op inline functions for the !(CONFIG_SCHED_MC || CONFIG_SCHED_SMT)
case.
This will eliminate all the #ifdef jungle in find_busiest_group() and the
other helper functions.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091422.13992.73616.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, micro-optimization
We don't need to perform power_savings balance if either the
cpu is NOT_IDLE or if the sched_domain doesn't contain the
SD_POWERSAVINGS_BALANCE flag set.
Currently, we check for these conditions multiple number of
times, even though these variables don't change over the scope
of find_busiest_group().
Check once, and store the value in the already exiting
"power_savings_balance" variable.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091417.13992.2657.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all the imbalance calculation out of find_busiest_group()
through this helper function.
With this change, the structure of find_busiest_group() will be
as follows:
- update_sched_domain_statistics.
- check if imbalance exits.
- update imbalance and return busiest.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091411.13992.43293.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
We have two places in find_busiest_group() where we need to calculate
the minor imbalance before returning the busiest group. Encapsulate
this functionality into a seperate helper function.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091406.13992.54316.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create a helper function named update_sd_lb_stats() to update the
various sched_domain related statistics in find_busiest_group().
With this we would have moved all the statistics computation out of
find_busiest_group().
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091401.13992.88737.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently we use a lot of local variables in find_busiest_group()
to capture the various statistics related to the sched_domain.
Group them together into a single data structure.
This will help us to offload the job of updating the sched_domain
statistics to a helper function.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091356.13992.25970.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Create a helper function named update_sg_lb_stats() which
can be invoked to calculate the individual group's statistics
in find_busiest_group().
This reduces the lenght of find_busiest_group() considerably.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Aked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091351.13992.43461.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently a whole bunch of variables are used to store the
various statistics pertaining to the groups we iterate over
in find_busiest_group().
Group them together in a single data structure and add
appropriate comments.
This will be useful later on when we create helper functions
to calculate the sched_group statistics.
Credit: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
LKML-Reference: <20090325091345.13992.20099.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Some indentations in find_busiest_group() can minimized by using
early exits with the help of gotos. This improves readability in
a couple of cases.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091340.13992.45062.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Currently the load idx calculation code is in find_busiest_group().
Move that to a static inline helper function.
Similary, to find the first cpu of a sched_group we use
cpumask_first(sched_group_cpus(group))
Use a helper to that. It improves readability in some cases.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Balbir Singh" <balbir@in.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: "Dhaval Giani" <dhaval@linux.vnet.ibm.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: "Vaidyanathan Srinivasan" <svaidy@linux.vnet.ibm.com>
LKML-Reference: <20090325091335.13992.55424.stgit@sofia.in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, new schedstat ABI
Since they are used on in statistics and are always set to zero, the
following fields from struct rq have been removed: yld_exp_empty,
yld_act_empty and yld_both_empty.
Both Sched Debug and SCHEDSTAT_VERSION versions has also been
incremented since ABIs have been changed.
The schedtop tool has been updated to properly handle new version of
schedstat:
http://rt.wiki.kernel.org/index.php/Schedtop_utility
Signed-off-by: Luis Henriques <henrix@sapo.pt>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090324221002.GA10061@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix circular locking
Steven reports a circular locking from alloc_cpumask_var doing
a wakeup. We get rid of this using the tried-and-true technique
of using a per-cpu cpumask_var_t rather than doing an alloc
every time.
Simpler and more robust than a rare, implicit allocation within
an atomic codepath.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <alpine.DEB.2.00.0903181729360.31583@gandalf.stny.rr.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There were 3 invocations of task_hot() in can_migrate_task().
Replace these 3 invocations by only one invocation, cached in
a local variable.
Signed-off-by: Luis Henriques <henrix@sapo.pt>
LKML-Reference: <20090316195902.GA6197@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fixed typos in function documentation.
Signed-off-by: Luis Henriques <henrix@sapo.pt>
LKML-Reference: <20090316195809.GA6073@hades.domain.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This is presumably what those definitions are for, and while all archs
define cpu_core_map/cpu_sibling map, that's changing (eg. x86 wants to
change it to a pointer).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: more precise avg_overlap metric - better load-balancing
avg_overlap is used to measure the runtime overlap of the waker and
wakee.
However, when a process changes behaviour, eg a pipe becomes
un-congested and we don't need to go to sleep after a wakeup
for a while, the avg_overlap value grows stale.
When running we use the avg runtime between preemption as a
measure for avg_overlap since the amount of runtime can be
correlated to cache footprint.
The longer we run, the less likely we'll be wanting to be
migrated to another CPU.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236709131.25234.576.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: micro-optimization
We can avoid the sched domain walk on try_to_wake_up() when we know
there are no groups.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236603381.8389.455.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Use test_tsk_need_resched(), set_tsk_need_resched(), need_resched()
instead of using TIF_NEED_RESCHED.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <49B10BA4.9070209@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix function graph trace hang / drop pointless softirq on UP
While debugging a function graph trace hang on an old PII, I saw
that it consumed most of its time on the timer interrupt. And
the domain rebalancing softirq was the most concerned.
The timer interrupt calls trigger_load_balance() which will
decide if it is worth to schedule a rebalancing softirq.
In case of builtin UP kernel, no problem arises because there is
no domain question.
In case of builtin SMP kernel running on an SMP box, still no
problem, the softirq will be raised each time we reach the
next_balance time.
In case of builtin SMP kernel running on a UP box (most distros
provide default SMP kernels, whatever the box you have), then
the CPU is attached to the NULL sched domain. So a kind of
unexpected behaviour happen:
trigger_load_balance() -> raises the rebalancing softirq later
on softirq: run_rebalance_domains() -> rebalance_domains() where
the for_each_domain(cpu, sd) is not taken because of the NULL
domain we are attached at. Which means rq->next_balance is never
updated. So on the next timer tick, we will enter
trigger_load_balance() which will always reschedule() the
rebalacing softirq:
if (time_after_eq(jiffies, rq->next_balance))
raise_softirq(SCHED_SOFTIRQ);
So for each tick, we process this pointless softirq.
This patch fixes it by checking if we are attached to the null
domain before raising the softirq, another possible fix would be
to set the maximal possible JIFFIES value to rq->next_balance if
we are attached to the NULL domain.
v2: build fix on UP
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <49af242d.1c07d00a.32d5.ffffc019@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: micro-optimization
Parameter "prev" is not used really.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix hung task with certain (non-default) rt-limit settings
Corey Hickey reported that on using setuid to change the uid of a
rt process, the process would be unkillable and not be running.
This is because there was no rt runtime for that user group. Add
in a check to see if a user can attach an rt task to its task group.
On failure, return EINVAL, which is also returned in
CONFIG_CGROUP_SCHED.
Reported-by: Corey Hickey <bugfood-ml@fatooh.org>
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix incorrect condition check
No need to start rt bandwidth timer when rt bandwidth is disabled.
If this timer starts, it may stop at sched_rt_period_timer() on the first time.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
cpuacct_charge() is in fast-path, and checking of !cpuacct_susys.active
always returns false after cpuacct has been initialized at system boot.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Oleg noticed that we don't strictly need CSD_FLAG_WAIT, rework
the code so that we can use CSD_FLAG_LOCK for both purposes.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
There are two allocated per-cpu accessor macros with almost identical
spelling. The original and far more popular is per_cpu_ptr (44
files), so change over the other 4 files.
tj: kill percpu_ptr() and update UP too
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: mingo@redhat.com
Cc: lenb@kernel.org
Cc: cpufreq@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
#define TASK_NICE(p) PRIO_TO_NICE((p)->static_prio)
So it's better to use TASK_NICE here.
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: struct rq size optimization
The idle_at_tick in struct rq is only used in SMP settings
and it does not make sense to have this in the rq in an UP setup.
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: fix TIMER_ABSTIME for process wide cpu timers
timers: split process wide cpu clocks/timers, fix
x86: clean up hpet timer reinit
timers: split process wide cpu clocks/timers, remove spurious warning
timers: split process wide cpu clocks/timers
signal: re-add dead task accumulation stats.
x86: fix hpet timer reinit for x86_64
sched: fix nohz load balancer on cpu offline
Intel reported a 10% regression (mysql+sysbench) on a 16-way machine
with these patches:
1596e29: sched: symmetric sync vs avg_overlap
d942fb6: sched: fix sync wakeups
Revert them.
Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Bisected-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: kernel crash fix
Yanmin Zhang reported that using a PERF_COUNT_TASK_CLOCK software
counter as a per-cpu counter would reliably crash the system, because
it calls __task_delta_exec with a null pointer. The page fault,
context switch and cpu migration counters also won't function
correctly as per-cpu counters since they reference the current task.
This fixes the problem by redirecting the task_clock counter to the
cpu_clock counter when used as a per-cpu counter, and by implementing
per-cpu page fault, context switch and cpu migration counters.
Along the way, this:
- Initializes counter->ctx earlier, in perf_counter_alloc, so that
sw_perf_counter_init can use it
- Adds code to kernel/sched.c to count task migrations into each
cpu, in rq->nr_migrations_in
- Exports the per-cpu context switch and task migration counts
via new functions added to kernel/sched.c
- Makes sure that if sw_perf_counter_init fails, we don't try to
initialize the counter as a hardware counter. Since the user has
passed a negative, non-raw event type, they clearly don't intend
for it to be interpreted as a hardware event.
Reported-by: "Zhang Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With exclusive waiters, every process woken up through the wait queue must
ensure that the next waiter down the line is woken when it has finished.
Interruptible waiters don't do that when aborting due to a signal. And if
an aborting waiter is concurrently woken up through the waitqueue, noone
will ever wake up the next waiter.
This has been observed with __wait_on_bit_lock() used by
lock_page_killable(): the first contender on the queue was aborting when
the actual lock holder woke it up concurrently. The aborted contender
didn't acquire the lock and therefor never did an unlock followed by
waking up the next waiter.
Add abort_exclusive_wait() which removes the process' wait descriptor from
the waitqueue, iff still queued, or wakes up the next waiter otherwise.
It does so under the waitqueue lock. Racing with a wake up means the
aborting process is either already woken (removed from the queue) and will
wake up the next waiter, or it will remove itself from the queue and the
concurrent wake up will apply to the next waiter after it.
Use abort_exclusive_wait() in __wait_event_interruptible_exclusive() and
__wait_on_bit_lock() when they were interrupted by other means than a wake
up through the queue.
[akpm@linux-foundation.org: coding-style fixes]
Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Mentored-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chuck Lever <cel@citi.umich.edu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org> ["after some testing"]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christian Borntraeger reports:
> After a logical cpu offline, even on a complete idle system, there
> is one cpu with full ticks. It turns out that nohz.cpu_mask has the
> the offlined cpu still set.
>
> In select_nohz_load_balancer() we check if the system is completely
> idle to turn of load balancing. We compare cpu_online_map with
> nohz.cpu_mask. Since cpu_online_map is updated on cpu unplug,
> but nohz.cpu_mask is not, the check fails and the scheduler believes
> that we need an "idle load balancer" even on a fully idle system.
> Since the ilb cpu does not deactivate the timer tick this breaks NOHZ.
Fix the select_nohz_load_balancer() to not set the nohz.cpu_mask
while a cpu is going offline.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reinstate the weakening of the sync hint if set. This yields a more
symmetric usage of avg_overlap.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Pawel Dziekonski reported that the openssl benchmark and his
quantum chemistry application both show slowdowns due to the
scheduler under-parallelizing execution.
The reason are pipe wakeups still doing 'sync' wakeups which
overrides the normal buddy wakeup logic - even if waker and
wakee are loosely coupled.
Fix an inversion of logic in the buddy wakeup code.
Reported-by: Pawel Dziekonski <dzieko@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix to preempt trace triggering lockdep check_flag failure
In local_bh_disable, the use of add_preempt_count causes the
preempt tracer to start recording the time preemption is off.
But because it already modified the preempt_count to show
softirqs disabled, and before it called the lockdep code to
handle this, it causes a state that lockdep can not handle.
The preempt tracer will reset the ring buffer on start of a trace,
and the ring buffer reset code does a spin_lock_irqsave. This
calls into lockdep and lockdep will fail when it detects the
invalid state of having softirqs disabled but the internal
current->softirqs_enabled is still set.
The fix is to manually add the SOFTIRQ_OFFSET to preempt count
and call the preempt tracer code outside the lockdep critical
area.
Thanks to Peter Zijlstra for suggesting this solution.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/include/asm/pda.h
We merge tip/core/percpu into tip/perfcounters/core because of a
semantic and contextual conflict: the former eliminates the PDA,
while the latter extends it with apic_perf_irqs field.
Resolve the conflict by moving the new field to the irq_cpustat
structure on 64-bit too.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Increase the SCHED_IDLE weight from 2 to 3, this gives much more stable
vruntime numbers.
time advanced in 100ms:
weight=2
64765.988352
67012.881408
88501.412352
weight=3
35496.181411
34130.971298
35497.411573
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make rt-limit tunables work again
Mark Glines reported:
> I've got an issue on x86-64 where I can't configure the system to allow
> RT tasks for a non-root user.
>
> In 2.6.26.5, I was able to do the following to set things up nicely:
> echo 450000 >/sys/kernel/uids/0/cpu_rt_runtime
> echo 450000 >/sys/kernel/uids/1000/cpu_rt_runtime
>
> Seems like every value I try to echo into the /sys files returns EINVAL.
For UID grouping we initialize the root group with infinite bandwidth
which by default is actually more than the global limit, therefore the
bandwidth check always fails.
Because the root group is a phantom group (for UID grouping) we cannot
runtime adjust it, therefore we let it reflect the global bandwidth
settings.
Reported-by: Mark Glines <mark@glines.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduce a new avg_wakeup statistic.
avg_wakeup is a measure of how frequently a task wakes up other tasks, it
represents the average time between wakeups, with a limit of avg_runtime
for when it doesn't wake up anybody.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change mutex contention behaviour such that it will sometimes busy wait on
acquisition - moving its behaviour closer to that of spinlocks.
This concept got ported to mainline from the -rt tree, where it was originally
implemented for rtmutexes by Steven Rostedt, based on work by Gregory Haskins.
Testing with Ingo's test-mutex application (http://lkml.org/lkml/2006/1/8/50)
gave a 345% boost for VFS scalability on my testbox:
# ./test-mutex-shm V 16 10 | grep "^avg ops"
avg ops/sec: 296604
# ./test-mutex-shm V 16 10 | grep "^avg ops"
avg ops/sec: 85870
The key criteria for the busy wait is that the lock owner has to be running on
a (different) cpu. The idea is that as long as the owner is running, there is a
fair chance it'll release the lock soon, and thus we'll be better off spinning
instead of blocking/scheduling.
Since regular mutexes (as opposed to rtmutexes) do not atomically track the
owner, we add the owner in a non-atomic fashion and deal with the races in
the slowpath.
Furthermore, to ease the testing of the performance impact of this new code,
there is means to disable this behaviour runtime (without having to reboot
the system), when scheduler debugging is enabled (CONFIG_SCHED_DEBUG=y),
by issuing the following command:
# echo NO_OWNER_SPIN > /debug/sched_features
This command re-enables spinning again (this is also the default):
# echo OWNER_SPIN > /debug/sched_features
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The problem is that dropping the spinlock right before schedule is a voluntary
preemption point and can cause a schedule, right after which we schedule again.
Fix this inefficiency by keeping preemption disabled until we schedule, do this
by explicity disabling preemption and providing a schedule() variant that
assumes preemption is already disabled.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo found a build error in the scheduler when RT_GROUP_SCHED was
enabled, but SMP was not. This patch rearranges the code such
that it is a little more streamlined and compiles under all permutations
of SMP, UP and RT_GROUP_SCHED. It was boot tested on my 4-way x86_64
and it still passes preempt-test.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
This reverts commit 7317d7b87e.
This has been reported (and bisected) by Alexey Zaytsev and
Kamalesh Babulal to produce annoying warnings during bootup
on both x86 and powerpc.
kernel_locked() is not a valid test in IRQ context (we update the
BKL's ->lock_depth and the preempt count separately and non-atomicalyy),
so we cannot put it into the generic preempt debugging checks which
can run in IRQ contexts too.
Reported-and-bisected-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Reported-and-bisected-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix on certain configs
Added 'double_rq_lock' forward declaration, allowing double_rq_lock
to be used in _double_lock_balance().
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix panic on ia64 with NR_CPUS=1024
struct sched_domain is now a dangling structure; where we really want
static ones, we need to use static_sched_domain.
(As the FIXME in this file says, cpumask_var_t would be better, but
this code is hairy enough without trying to add initialization code to
the right places).
Reported-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Vaidyanathan Srinivasan reported:
> =============================================
> [ INFO: possible recursive locking detected ]
> 2.6.28-autotest-tip-sv #1
> ---------------------------------------------
> klogd/5062 is trying to acquire lock:
> (&rq->lock){++..}, at: [<ffffffff8022aca2>] task_rq_lock+0x45/0x7e
>
> but task is already holding lock:
> (&rq->lock){++..}, at: [<ffffffff805f7354>] schedule+0x158/0xa31
With sched_mc at 2. (it is default-off)
Strictly speaking we'll not deadlock, because ttwu will not be able to
place the migration task on our rq, but since the code can deal with
both rqs getting unlocked, this seems the easiest way out.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
init_rootdomain() calls alloc_bootmem_cpumask_var() at system boot,
so does cpupri_init().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's not the responsibility of init_rootdomain() to free root_domain
allocated by alloc_rootdomain().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Make arch_reinit_sched_domains() static. It was exported to be used in
s390, but now rebuild_sched_domains() is used instead.
- Make it return void.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
The only caller is cpu_dev_init() which is marked as __init.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
x86: setup_per_cpu_areas() cleanup
cpumask: fix compile error when CONFIG_NR_CPUS is not defined
cpumask: use alloc_cpumask_var_node where appropriate
cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
x86: use cpumask_var_t in acpi/boot.c
x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
sched: put back some stack hog changes that were undone in kernel/sched.c
x86: enable cpus display of kernel_max and offlined cpus
ia64: cpumask fix for is_affinity_mask_valid()
cpumask: convert RCU implementations, fix
xtensa: define __fls
mn10300: define __fls
m32r: define __fls
h8300: define __fls
frv: define __fls
cris: define __fls
cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
cpumask: zero extra bits in alloc_cpumask_var_node
cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
cpumask: convert mm/
...
Impact: prevents panic from stack overflow on numa-capable machines.
Some of the "removal of stack hogs" changes in kernel/sched.c by using
node_to_cpumask_ptr were undone by the early cpumask API updates, and
causes a panic due to stack overflow. This patch undoes those changes
by using cpumask_of_node() which returns a 'const struct cpumask *'.
In addition, cpu_coregoup_map is replaced with cpu_coregroup_mask further
reducing stack usage. (Both of these updates removed 9 FIXME's!)
Also:
Pick up some remaining changes from the old 'cpumask_t' functions to
the new 'struct cpumask *' functions.
Optimize memory traffic by allocating each percpu local_cpu_mask on the
same node as the referring cpu.
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
x86: export vector_used_by_percpu_irq
x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
sched: nominate preferred wakeup cpu, fix
x86: fix lguest used_vectors breakage, -v2
x86: fix warning in arch/x86/kernel/io_apic.c
sched: fix warning in kernel/sched.c
sched: move test_sd_parent() to an SMP section of sched.h
sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
sched: activate active load balancing in new idle cpus
sched: bias task wakeups to preferred semi-idle packages
sched: nominate preferred wakeup cpu
sched: favour lower logical cpu number for sched_mc balance
sched: framework for sched_mc/smt_power_savings=N
sched: convert BALANCE_FOR_xx_POWER to inline functions
x86: use possible_cpus=NUM to extend the possible cpus allowed
x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
x86: update io_apic.c to the new cpumask code
x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
x86: xen: use smp_call_function_many()
x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
...
Fixed up trivial conflict in kernel/time/tick-sched.c manually
The cpu time spent by the idle process actually doing something is
currently accounted as idle time. This is plain wrong, the architectures
that support VIRT_CPU_ACCOUNTING=y can do better: distinguish between the
time spent doing nothing and the time spent by idle doing work. The first
is accounted with account_idle_time and the second with account_system_time.
The architectures that use the account_xxx_time interface directly and not
the account_xxx_ticks interface now need to do the check for the idle
process in their arch code. In particular to improve the system vs true
idle time accounting the arch code needs to measure the true idle time
instead of just testing for the idle process.
To improve the tick based accounting as well we would need an architecture
primitive that can tell us if the pt_regs of the interrupted context
points to the magic instruction that halts the cpu.
In addition idle time is no more added to the stime of the idle process.
This field now contains the system time of the idle process as it should
be. On systems without VIRT_CPU_ACCOUNTING this will always be zero as
every tick that occurs while idle is running will be accounted as idle
time.
This patch contains the necessary common code changes to be able to
distinguish idle system time and true idle time. The architectures with
support for VIRT_CPU_ACCOUNTING need some changes to exploit this.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The utimescaled / stimescaled fields in the task structure and the
global cpustat should be set on all architectures. On s390 the calls
to account_user_time_scaled and account_system_time_scaled never have
been added. In addition system time that is accounted as guest time
to the user time of a process is accounted to the scaled system time
instead of the scaled user time.
To fix the bugs and to prevent future forgetfulness this patch merges
account_system_time_scaled into account_system_time and
account_user_time_scaled into account_user_time.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Michael Neuling <mikey@neuling.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
hrtimers: fix warning in kernel/hrtimer.c
x86: make sure we really have an hpet mapping before using it
x86: enable HPET on Fujitsu u9200
linux/timex.h: cleanup for userspace
posix-timers: simplify de_thread()->exit_itimers() path
posix-timers: check ->it_signal instead of ->it_pid to validate the timer
posix-timers: use "struct pid*" instead of "struct task_struct*"
nohz: suppress needless timer reprogramming
clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
nohz: no softirq pending warnings for offline cpus
hrtimer: removing all ur callback modes, fix
hrtimer: removing all ur callback modes, fix hotplug
hrtimer: removing all ur callback modes
x86: correct link to HPET timer specification
rtc-cmos: export second NVRAM bank
Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
stacktrace: provide save_stack_trace_tsk() weak alias
rcu: provide RCU options on non-preempt architectures too
printk: fix discarding message when recursion_bug
futex: clean up futex_(un)lock_pi fault handling
"Tree RCU": scalable classic RCU implementation
futex: rename field in futex_q to clarify single waiter semantics
x86/swiotlb: add default swiotlb_arch_range_needs_mapping
x86/swiotlb: add default phys<->bus conversion
x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
x86: add swiotlb allocation functions
swiotlb: consolidate swiotlb info message printing
swiotlb: support bouncing of HighMem pages
swiotlb: factor out copy to/from device
swiotlb: add arch hook to force mapping
swiotlb: allow architectures to override phys<->bus<->phys conversions
swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
rcu: fix rcutorture behavior during reboot
resources: skip sanity check of busy resources
swiotlb: move some definitions to header
swiotlb: allow architectures to override swiotlb pool allocation
...
Fix up trivial conflicts in
arch/x86/kernel/Makefile
arch/x86/mm/init_32.c
include/linux/hardirq.h
as per Ingo's suggestions.
The RT scheduler employs a "push/pull" design to actively balance tasks
within the system (on a per disjoint cpuset basis). When a task is
awoken, it is immediately determined if there are any lower priority
cpus which should be preempted. This is opposed to the way normal
SCHED_OTHER tasks behave, which will wait for a periodic rebalancing
operation to occur before spreading out load.
When a particular RQ has more than 1 active RT task, it is said to
be in an "overloaded" state. Once this occurs, the system enters
the active balancing mode, where it will try to push the task away,
or persuade a different cpu to pull it over. The system will stay
in this state until the system falls back below the <= 1 queued RT
task per RQ.
However, the current implementation suffers from a limitation in the
push logic. Once overloaded, all tasks (other than current) on the
RQ are analyzed on every push operation, even if it was previously
unpushable (due to affinity, etc). Whats more, the operation stops
at the first task that is unpushable and will not look at items
lower in the queue. This causes two problems:
1) We can have the same tasks analyzed over and over again during each
push, which extends out the fast path in the scheduler for no
gain. Consider a RQ that has dozens of tasks that are bound to a
core. Each one of those tasks will be encountered and skipped
for each push operation while they are queued.
2) There may be lower-priority tasks under the unpushable task that
could have been successfully pushed, but will never be considered
until either the unpushable task is cleared, or a pull operation
succeeds. The net result is a potential latency source for mid
priority tasks.
This patch aims to rectify these two conditions by introducing a new
priority sorted list: "pushable_tasks". A task is added to the list
each time a task is activated or preempted. It is removed from the
list any time it is deactivated, made current, or fails to push.
This works because a task only needs to be attempted to push once.
After an initial failure to push, the other cpus will eventually try to
pull the task when the conditions are proper. This also solves the
problem that we don't completely analyze all tasks due to encountering
an unpushable tasks. Now every task will have a push attempted (when
appropriate).
This reduces latency both by shorting the critical section of the
rq->lock for certain workloads, and by making sure the algorithm
considers all eligible tasks in the system.
[ rostedt: added a couple more BUG_ONs ]
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
We currently run class->post_schedule() outside of the rq->lock, which
means that we need to test for the need to post_schedule outside of
the lock to avoid a forced reacquistion. This is currently not a problem
as we only look at rq->rt.overloaded. However, we want to enhance this
going forward to look at more state to reduce the need to post_schedule to
a bare minimum set. Therefore, we introduce a new member-func called
needs_post_schedule() which tests for the post_schedule condtion without
actually performing the work. Therefore it is safe to call this
function before the rq->lock is released, because we are guaranteed not
to drop the lock at an intermediate point (such as what post_schedule()
may do).
We will use this later in the series
[ rostedt: removed paranoid BUG_ON ]
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
double_lock balance() currently favors logically lower cpus since they
often do not have to release their own lock to acquire a second lock.
The result is that logically higher cpus can get starved when there is
a lot of pressure on the RQs. This can result in higher latencies on
higher cpu-ids.
This patch makes the algorithm more fair by forcing all paths to have
to release both locks before acquiring them again. Since callsites to
double_lock_balance already consider it a potential preemption/reschedule
point, they have the proper logic to recheck for atomicity violations.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
git-id c4acb2c066 attempted to limit
newidle critical section length by stopping after at least one task
was moved. Further investigation has shown that there are other
paths nested further inside the algorithm which still remain that allow
long latencies to occur with newidle balancing. This patch applies
the same technique inside balance_tasks() to limit the duration of
this optional balancing operation.
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
CC: Nick Piggin <npiggin@suse.de>
We will use this later in the series to reduce the amount of rq-lock
contention during a pull operation
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits)
sched, trace: update trace_sched_wakeup()
tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
Revert "x86: disable X86_PTRACE_BTS"
ring-buffer: prevent false positive warning
ring-buffer: fix dangling commit race
ftrace: enable format arguments checking
x86, bts: memory accounting
x86, bts: add fork and exit handling
ftrace: introduce tracing_reset_online_cpus() helper
tracing: fix warnings in kernel/trace/trace_sched_switch.c
tracing: fix warning in kernel/trace/trace.c
tracing/ring-buffer: remove unused ring_buffer size
trace: fix task state printout
ftrace: add not to regex on filtering functions
trace: better use of stack_trace_enabled for boot up code
trace: add a way to enable or disable the stack tracer
x86: entry_64 - introduce FTRACE_ frame macro v2
tracing/ftrace: add the printk-msg-only option
tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
x86, bts: correctly report invalid bts records
...
Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits
being already partly merged by the SH merge.
cpu_coregroup_map returned a cpumask_t: it's going away.
(Note, the sched part of this patch won't apply meaningfully to the
sched tree, but I'm posting it to show the goal).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Impact: extend the wakeup tracepoint with the info whether the wakeup was real
Add the information needed to distinguish 'real' wakeups from 'false'
wakeups.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Andrew Morton reported:
> kernel/sched.c: In function 'schedule':
> kernel/sched.c:3679: warning: 'active_balance' may be used uninitialized in this function
>
> This warning is correct - the code is buggy.
In sched.c load_balance_newidle, there's real potential use of
uninitialised variable - fix it.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix cpumask conversion bug
this warning:
kernel/sched.c: In function ‘find_busiest_group’:
kernel/sched.c:3429: warning: passing argument 1 of ‘__first_cpu’ from incompatible pointer type
shows that we forgot to convert a new patch to the new cpumask APIs.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: tweak task balancing to save power more agressively
Active load balancing is a process by which migration thread
is woken up on the target CPU in order to pull current
running task on another package into this newly idle
package.
This method is already in use with normal load_balance(),
this patch introduces this method to new idle cpus when
sched_mc is set to POWERSAVINGS_BALANCE_WAKEUP.
This logic provides effective consolidation of short running
daemon jobs in a almost idle system
The side effect of this patch may be ping-ponging of tasks
if the system is moderately utilised. May need to adjust the
iterations before triggering.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend load-balancing code (no change in behavior yet)
When the system utilisation is low and more cpus are idle,
then the process waking up from sleep should prefer to
wakeup an idle cpu from semi-idle cpu package (multi core
package) rather than a completely idle cpu package which
would waste power.
Use the sched_mc balance logic in find_busiest_group() to
nominate a preferred wakeup cpu.
This info can be stored in appropriate sched_domain, but
updating this info in all copies of sched_domain is not
practical. Hence this information is stored in root_domain
struct which is one copy per partitioned sched domain.
The root_domain can be accessed from each cpu's runqueue
and there is one copy per partitioned sched domain.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change load-balancing direction to match that of irqbalanced
Just in case two groups have identical load, prefer to move load to lower
logical cpu number rather than the present logic of moving to higher logical
number.
find_busiest_group() tries to look for a group_leader that has spare capacity
to take more tasks and freeup an appropriate least loaded group. Just in case
there is a tie and the load is equal, then the group with higher logical number
is favoured. This conflicts with user space irqbalance daemon that will move
interrupts to lower logical number if the system utilisation is very low.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend range of /sys/devices/system/cpu/sched_mc_power_savings
Currently the sched_mc/smt_power_savings variable is a boolean,
which either enables or disables topology based power savings.
This patch extends the behaviour of the variable from boolean to
multivalued, such that based on the value, we decide how
aggressively do we want to perform powersavings balance at
appropriate sched domain based on topology.
Variable levels of power saving tunable would benefit end user to
match the required level of power savings vs performance
trade-off depending on the system configuration and workloads.
This version makes the sched_mc_power_savings global variable to
take more values (0,1,2). Later versions can have a single
tunable called sched_power_savings instead of
sched_{mc,smt}_power_savings.
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
these warnings:
kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_register’:
kernel/trace/trace_sched_switch.c:96: warning: passing argument 1 of ‘register_trace_sched_wakeup_new’ from incompatible pointer type
kernel/trace/trace_sched_switch.c:112: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type
kernel/trace/trace_sched_switch.c: In function ‘tracing_sched_unregister’:
kernel/trace/trace_sched_switch.c:121: warning: passing argument 1 of ‘unregister_trace_sched_wakeup_new’ from incompatible pointer type
Trigger because sched_wakeup_new tracepoints need the same trace
signature as sched_wakeup - which was changed recently.
Fix it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: simplify code
When we turn on CONFIG_SCHEDSTATS, per-task cpu runtime is accumulated
twice. Once in task->se.sum_exec_runtime and once in sched_info.cpu_time.
These two stats are exactly the same.
Given that task->se.sum_exec_runtime is always accumulated by the core
scheduler, sched_info can reuse that data instead of duplicate the accounting.
Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch export per-cpu CPU cycle usage for a given cpuacct cgroup.
There is a need for a user space monitor daemon to track group CPU
usage on per-cpu base. It is also useful for monitoring CFS load
balancer behavior by tracking per CPU group usage.
Signed-off-by: Ken Chen <kenchen@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: micro-optimize the code on 64-bit architectures
In the thread regarding to 'export percpu cpuacct cgroup stats'
http://lkml.org/lkml/2008/12/7/13
akpm pointed out that current cpuacct code is inefficient. This patch
refactoring the following:
* make cpu_rq locking only on 32-bit
* change iterator to each_present_cpu instead of each_possible_cpu to
make it hotplug friendly.
It's a bit of code churn, but I was rewarded with 160 byte code size saving
on x86-64 arch and zero code size change on i386.
Signed-off-by: Ken Chen <kenchen@google.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: sharpen the wakeup-granularity to always be against current scheduler time
It was possible to do the preemption check against an old time stamp.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new feature, new sw counter
Add a counter that counts the number of cross-CPU migrations a
task is suffering.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change calling convention of existing cpumask APIs
Most cpumask functions started with cpus_: these have been replaced by
cpumask_ ones which take struct cpumask pointers as expected.
These four functions don't have good replacement names; fortunately
they're rarely used, so we just change them over.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: paulus@samba.org
Cc: mingo@redhat.com
Cc: tony.luck@intel.com
Cc: ralf@linux-mips.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: cl@linux-foundation.org
Cc: srostedt@redhat.com
arch_reinit_sched_domains() used to call arch_update_cpu_topology()
via arch_init_sched_domains(). This call got lost with
e761b77252 ("cpu hotplug, sched: Introduce
cpu_active_map and redo sched domain managment (take 2)".
So we might end up with outdated and missing cpus in the cpu core
maps (architecture used to call arch_reinit_sched_domains if cpu
topology changed).
This adds a call to arch_update_cpu_topology in partition_sched_domains
which gets called whenever scheduling domains get updated. Which is
what is supposed to happen when cpu topology changes.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change arch_update_cpu_topology so it returns 1 if the cpu topology changed
and 0 if it didn't change. This will be useful for the next patch which adds
a call to this function in partition_sched_domains.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The trace point only caught one of many places where a task changes cpu,
put it in the right place to we get all of them.
Change the signature while we're at it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix possible deadlock in CPU hot-remove path
This patch fixes a possible deadlock scenario in the CPU remove path.
migration_call grabs rq->lock, then wakes up everything on rq->migration_queue
with the lock held. Then one of the tasks on the migration queue ends up
calling tg_shares_up which then also tries to acquire the same rq->lock.
[c000000058eab2e0] c000000000502078 ._spin_lock_irqsave+0x98/0xf0
[c000000058eab370] c00000000008011c .tg_shares_up+0x10c/0x20c
[c000000058eab430] c00000000007867c .walk_tg_tree+0xc4/0xfc
[c000000058eab4d0] c0000000000840c8 .try_to_wake_up+0xb0/0x3c4
[c000000058eab590] c0000000000799a0 .__wake_up_common+0x6c/0xe0
[c000000058eab640] c00000000007ada4 .complete+0x54/0x80
[c000000058eab6e0] c000000000509fa8 .migration_call+0x5fc/0x6f8
[c000000058eab7c0] c000000000504074 .notifier_call_chain+0x68/0xe0
[c000000058eab860] c000000000506568 ._cpu_down+0x2b0/0x3f4
[c000000058eaba60] c000000000506750 .cpu_down+0xa4/0x108
[c000000058eabb10] c000000000507e54 .store_online+0x44/0xa8
[c000000058eabba0] c000000000396260 .sysdev_store+0x3c/0x50
[c000000058eabc10] c0000000001a39b8 .sysfs_write_file+0x124/0x18c
[c000000058eabcd0] c00000000013061c .vfs_write+0xd0/0x1bc
[c000000058eabd70] c0000000001308a4 .sys_write+0x68/0x114
[c000000058eabe30] c0000000000086b4 syscall_exit+0x0/0x40
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix SD_BALANCE_NEWIDLEand broaden its use
load_balance_newidle() does not get called if SD_BALANCE_NEWIDLE is
set at higher level domain (3-CPU) and not in low level domain (2-MC).
pulled_task is initialised to -1 and checked for non-zero which is
always true if the lowest level sched_domain does not have
SD_BALANCE_NEWIDLE flag set.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Implement the core kernel bits of Performance Counters subsystem.
The Linux Performance Counter subsystem provides an abstraction of
performance counter hardware capabilities. It provides per task and per
CPU counters, and it provides event capabilities on top of those.
Performance counters are accessed via special file descriptors.
There's one file descriptor per virtual counter used.
The special file descriptor is opened via the perf_counter_open()
system call:
int
perf_counter_open(u32 hw_event_type,
u32 hw_event_period,
u32 record_type,
pid_t pid,
int cpu);
The syscall returns the new fd. The fd can be used via the normal
VFS system calls: read() can be used to read the counter, fcntl()
can be used to set the blocking mode, etc.
Multiple counters can be kept open at a time, and the counters
can be poll()ed.
See more details in Documentation/perf-counters.txt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: optimize the sched domains tree some more
The addition of SD_SERIALIZE flag added to SD_NODE_INIT prevented top level
dummy numa sched_domain to be properly degenerated on non-numa smp machine.
The reason is that in sd_parent_degenerate(), it found that the child and
parent does not have comon sched_domain flags due to SD_SERIALIZE. However,
for non-numa smp box, the top level is a dummy with a single sched_group.
Filter out SD_SERIALIZE if it is on non-numa machine to properly degenerate
top level node sched_domain. this will cut back some of the sd domain walk
in the load balancer code.
Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
Impact: extend information in /proc/sched_debug
This patch adds uid information in sched_debug for CONFIG_USER_SCHED
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Regarding the bug addressed in:
4cd4262: sched: prevent divide by zero error in cpu_avg_load_per_task
Linus points out that the fix is not complete:
> There's nothing that keeps gcc from deciding not to reload
> rq->nr_running.
>
> Of course, in _practice_, I don't think gcc ever will (if it decides
> that it will spill, gcc is likely going to decide that it will
> literally spill the local variable to the stack rather than decide to
> reload off the pointer), but it's a valid compiler optimization, and
> it even has a name (rematerialization).
>
> So I suspect that your patch does fix the bug, but it still leaves the
> fairly unlikely _potential_ for it to re-appear at some point.
>
> We have ACCESS_ONCE() as a macro to guarantee that the compiler
> doesn't rematerialize a pointer access. That also would clarify
> the fact that we access something unsafe outside a lock.
So make sure our nr_running value is immutable and cannot change
after we check it for nonzero.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move double_lock_balance()/double_unlock_balance() higher to fix the following
with gcc-3.4.6:
CC kernel/sched.o
In file included from kernel/sched.c:1605:
kernel/sched_rt.c: In function `find_lock_lowest_rq':
kernel/sched_rt.c:914: sorry, unimplemented: inlining failed in call to 'double_unlock_balance': function body not available
kernel/sched_rt.c:1077: sorry, unimplemented: called from here
make[2]: *** [kernel/sched.o] Error 1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix divide by zero crash in scheduler rebalance irq
While testing the branch profiler, I hit this crash:
divide error: 0000 [#1] PREEMPT SMP
[...]
RIP: 0010:[<ffffffff8024a008>] [<ffffffff8024a008>] cpu_avg_load_per_task+0x50/0x7f
[...]
Call Trace:
<IRQ> <0> [<ffffffff8024fd43>] find_busiest_group+0x3e5/0xcaa
[<ffffffff8025da75>] rebalance_domains+0x2da/0xa21
[<ffffffff80478769>] ? find_next_bit+0x1b2/0x1e6
[<ffffffff8025e2ce>] run_rebalance_domains+0x112/0x19f
[<ffffffff8026d7c2>] __do_softirq+0xa8/0x232
[<ffffffff8020ea7c>] call_softirq+0x1c/0x3e
[<ffffffff8021047a>] do_softirq+0x94/0x1cd
[<ffffffff8026d5eb>] irq_exit+0x6b/0x10e
[<ffffffff8022e6ec>] smp_apic_timer_interrupt+0xd3/0xff
[<ffffffff8020e4b3>] apic_timer_interrupt+0x13/0x20
The code for cpu_avg_load_per_task has:
if (rq->nr_running)
rq->avg_load_per_task = rq->load.weight / rq->nr_running;
The runqueue lock is not held here, and there is nothing that prevents
the rq->nr_running from going to zero after it passes the if condition.
The branch profiler simply made the race window bigger.
This patch saves off the rq->nr_running to a local variable and uses that
for both the condition and the division.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: locking fix
We can't call cpuset_cpus_allowed_locked() with the rq lock held.
However, the rq lock merely protects us from (1) cpu_online_mask changing
and (2) someone else changing p->cpus_allowed.
The first can't happen because we're being called from a cpu hotplug
notifier. The second doesn't really matter: we are forcing the task off
a CPU it was affine to, so we're not doing very well anyway.
So we remove the rq lock from this path, and all is good.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch changes the name of the "return function tracer" into
function-graph-tracer which is a more suitable name for a tracing
which makes one able to retrieve the ordered call stack during
the code flow.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, move all hrtimer processing into hardirq context
This is an attempt at removing some of the hrtimer complexity by
reducing the number of callback modes to 1.
This means that all hrtimer callback functions will be ran from HARD-irq
context.
I went through all the 30 odd hrtimer callback functions in the kernel
and saw only one that I'm not quite sure of, which is the one in
net/can/bcm.c - hence I'm CC-ing the folks responsible for that code.
Furthermore, the hrtimer core now calls callbacks directly with IRQs
disabled in case you try to enqueue an expired timer. If this timer is a
periodic timer (which should use hrtimer_forward() to advance its time)
then it might be possible to end up in an inf. recursive loop due to the
fact that hrtimer_forward() doesn't round up to the next timer
granularity, and therefore keeps on calling the callback - obviously
this needs a fix.
Aside from that, this seems to compile and actually boot on my dual core
test box - although I'm sure there are some bugs in, me not hitting any
makes me certain :-)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Trivial API conversion
NR_CPUS -> nr_cpu_ids
cpumask_t -> struct cpumask
sizeof(cpumask_t) -> cpumask_size()
cpumask_a = cpumask_b -> cpumask_copy(&cpumask_a, &cpumask_b)
cpu_set() -> cpumask_set_cpu()
first_cpu() -> cpumask_first()
cpumask_of_cpu() -> cpumask_of()
cpus_* -> cpumask_*
There are some FIXMEs where we all archs to complete infrastructure
(patches have been sent):
cpu_coregroup_map -> cpu_coregroup_mask
node_to_cpumask* -> cpumask_of_node
There is also one FIXME where we pass an array of cpumasks to
partition_sched_domains(): this implies knowing the definition of
'struct cpumask' and the size of a cpumask. This will be fixed in a
future patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: (future) size reduction for large NR_CPUS.
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS. cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack usage reduction, (future) size reduction for large NR_CPUS.
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS.
The fact cpupro_init is called both before and after the slab is
available makes for an ugly parameter unfortunately.
We also use cpumask_any_and to get rid of a temporary in cpupri_find.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: (future) size reduction for large NR_CPUS.
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS. cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack usage reduction, (future) size reduction, cleanup
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS. cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.
We can also use cpulist_parse() instead of doing it manually in
isolated_cpu_setup.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack usage reduction
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
stack space. cpumask_var_t is just a struct cpumask for
!CONFIG_CPUMASK_OFFSTACK.
In this case, we always alloced, but we don't need to any more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack usage reduction
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space on the stack. cpumask_var_t is just a struct cpumask for
!CONFIG_CPUMASK_OFFSTACK.
Note the removal of the initializer of new_mask: since the first thing
we did was "cpus_and(new_mask, new_mask, cpus_allowed)" I just changed
that to "cpumask_and(new_mask, in_mask, cpus_allowed);".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack usage reduction
With some care, we can avoid needing a temporary cpumask (we can't
really allocate here, since we can't fail).
This version calls cpuset_cpus_allowed_locked() with the task_rq_lock
held. I'm fairly sure this works, but there might be a deadlock
hiding.
And of course, we can't get rid of the last cpumask on stack until we
can use cpumask_of_node instead of node_to_cpumask.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack usage reduction
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space in the stack. cpumask_var_t is just a struct cpumask for
!CONFIG_CPUMASK_OFFSTACK.
Some jiggling here to make sure we always exit at the bottom (so we hit
the free_cpumask_var there).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack usage reduction
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space in the stack. cpumask_var_t is just a struct cpumask for
!CONFIG_CPUMASK_OFFSTACK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: stack usage reduction
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space in the stack. cpumask_var_t is just a struct cpumask for
!CONFIG_CPUMASK_OFFSTACK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: (future) size reduction for large NR_CPUS.
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS. cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: (future) size reduction for large NR_CPUS.
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS. cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.
def_root_domain is static, and so its masks are initialized with
alloc_bootmem_cpumask_var. After that, alloc_cpumask_var is used.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: (future) size reduction for large NR_CPUS.
Dynamically allocating cpumasks (when CONFIG_CPUMASK_OFFSTACK) saves
space for small nr_cpu_ids but big CONFIG_NR_CPUS. cpumask_var_t
is just a struct cpumask for !CONFIG_CPUMASK_OFFSTACK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: (future) size reduction for large NR_CPUS.
We move the 'cpumask' member of sched_group to the end, so when we
kmalloc it we can do a minimal allocation: saves space for small
nr_cpu_ids but big CONFIG_NR_CPUS. Similar trick for 'span' in
sched_domain.
This isn't quite as good as converting to a cpumask_var_t, as some
sched_groups are actually static, but it's safer: we don't have to
figure out where to call alloc_cpumask_var/free_cpumask_var.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: trivial wrap of member accesses
This eases the transition in the next patch.
We also get rid of a temporary cpumask in find_idlest_cpu() thanks to
for_each_cpu_and, and sched_balance_self() due to getting weight before
setting sd to NULL.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: use new API
any_online_cpu() is a good name, but it takes a cpumask_t, not a
pointer.
There are several places where any_online_cpu() doesn't really want a
mask arg at all. Replace all callers with cpumask_any() and
cpumask_any_and().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: use new general API
Using lots of allocs rather than one big alloc is less efficient, but
who cares for this setup function?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: trivial API conversion
This is a simple conversion, but note that for_each_cpu() terminates
with i >= nr_cpu_ids, not i == NR_CPUS like for_each_cpu_mask() did.
I don't convert all of them: sd->span changes in a later patch, so
change those iterators there rather than here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
* use node_to_cpumask_ptr in place of node_to_cpumask to reduce stack
requirements in sched.c
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: use deeper function tracing depth safely
Some tests showed that function return tracing needed a more deeper depth
of function calls. But it could be unsafe to store these return addresses
to the stack.
So these arrays will now be allocated dynamically into task_struct of current
only when the tracer is activated.
Typical scheme when tracer is activated:
- allocate a return stack for each task in global list.
- fork: allocate the return stack for the newly created task
- exit: free return stack of current
- idle init: same as fork
I chose a default depth of 50. I don't have overruns anymore.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This commit:
commit f7b4cddcc5
Author: Oleg Nesterov <oleg@tv-sign.ru>
Date: Tue Oct 16 23:30:56 2007 -0700
do CPU_DEAD migrating under read_lock(tasklist) instead of write_lock_irq(ta
Currently move_task_off_dead_cpu() is called under
write_lock_irq(tasklist). This means it can't use task_lock() which is
needed to improve migrating to take task's ->cpuset into account.
Change the code to call move_task_off_dead_cpu() with irqs enabled, and
change migrate_live_tasks() to use read_lock(tasklist).
...forgot to update the comment in front of move_task_off_dead_cpu.
Reference: http://lkml.org/lkml/2008/6/23/135
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make load-balancing more consistent
In the update_shares() path leading to tg_shares_up(), the calculation of
per-cpu cfs_rq shares is rather erratic even under moderate task wake up
rate. The problem is that the per-cpu tg->cfs_rq load weight used in the
sd_rq_weight aggregation and actual redistribution of the cfs_rq->shares
are collected at different time. Under moderate system load, we've seen
quite a bit of variation on the cfs_rq->shares and ultimately wildly
affects sched_entity's load weight.
This patch caches the result of initial per-cpu load weight when doing the
sum calculation, and then pass it down to update_group_shares_cpu() for
redistributing per-cpu cfs_rq shares. This allows consistent total cfs_rq
shares across all CPUs. It also simplifies the rounding and zero load
weight check.
Signed-off-by: Ken Chen <kenchen@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: properly rebuild sched-domains on kmalloc() failure
When cpuset failed to generate sched domains due to kmalloc()
failure, the scheduler should fallback to the single partition
'fallback_doms' and rebuild sched domains, but now it only
destroys but not rebuilds sched domains.
The regression was introduced by:
| commit dfb512ec48
| Author: Max Krasnyansky <maxk@qualcomm.com>
| Date: Fri Aug 29 13:11:41 2008 -0700
|
| sched: arch_reinit_sched_domains() must destroy domains to force rebuild
After the above commit, partition_sched_domains(0, NULL, NULL) will
only destroy sched domains and partition_sched_domains(1, NULL, NULL)
will create the default sched domain.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove unnecessary accounting call
I don't actually understand account_steal_time() and I failed to find the
commit which added account_group_system_time(), but this looks bogus.
In any case rq->idle must be single-threaded, so it can't have ->totals.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: API *CHANGE*. Must update all tracepoint users.
Add DEFINE_TRACE() to tracepoints to let them declare the tracepoint
structure in a single spot for all the kernel. It helps reducing memory
consumption, especially when declaring a lot of tracepoints, e.g. for
kmalloc tracing.
*API CHANGE WARNING*: now, DECLARE_TRACE() must be used in headers for
tracepoint declarations rather than DEFINE_TRACE(). This is the sane way
to do it. The name previously used was misleading.
Updates scheduler instrumentation to follow this API change.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-audit@redhat.com
Cc: containers@lists.linux-foundation.org
Cc: linux-mm@kvack.org
Signed-off-by: James Morris <jmorris@namei.org>
Maciej Rutecki reported:
> I have this bug during suspend to disk:
>
> [ 188.592151] Enabling non-boot CPUs ...
> [ 188.592151] SMP alternatives: switching to SMP code
> [ 188.666058] BUG: using smp_processor_id() in preemptible
> [00000000]
> code: suspend_to_disk/2934
> [ 188.666064] caller is native_sched_clock+0x2b/0x80
Which, as noted by Linus, was caused by me, via:
7cbaef9c "sched: optimize sched_clock() a bit"
Move the rq locking a bit earlier in the initialization sequence,
that will make the sched_clock() call in init_idle() non-preemptible.
Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix load balancer load average calculation accuracy
cpu_avg_load_per_task() returns a stale value when nr_running is 0.
It returns an older stale (caculated when nr_running was non zero) value.
This patch returns and sets rq->avg_load_per_task to zero when nr_running
is 0.
Compile and boot tested on a x86_64 box.
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: improve CPU time accounting of tasks under the cpu accounting controller
Add hierarchical accounting to cpu accounting controller and include
cpuacct documentation.
Currently, while charging the task's cputime to its accounting group,
the accounting group hierarchy isn't updated. This patch charges the cputime
of a task to its accounting group and all its parent accounting groups.
Reported-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Paul Menage <menage@google.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix hang/crash on ia64 under high load
This is ugly, but the simplest patch by far.
Unlike other similar routines, account_group_exec_runtime() could be
called "implicitly" from within scheduler after exit_notify(). This
means we can race with the parent doing release_task(), we can't just
check ->signal != NULL.
Change __exit_signal() to do spin_unlock_wait(&task_rq(tsk)->lock)
before __cleanup_signal() to make sure ->signal can't be freed under
task_rq(tsk)->lock. Note that task_rq_unlock_wait() doesn't care
about the case when tsk changes cpu/rq under us, this should be OK.
Thanks to Ingo who nacked my previous buggy patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Doug Chapman <doug.chapman@hp.com>
