trivial: fix typo "to to" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Anand Gadiyar 2009-07-16 17:13:03 +02:00 committed by Jiri Kosina
parent 4f37940d64
commit fd589a8f0a
32 changed files with 35 additions and 35 deletions

View file

@ -34,5 +34,5 @@ Fan rotation speeds are reported as 14-bit values from a gated clock
signal. Speeds down to 83 RPM can be measured. signal. Speeds down to 83 RPM can be measured.
An alarm is triggered if the rotation speed drops below a programmable An alarm is triggered if the rotation speed drops below a programmable
limit. Another alarm is triggered if the speed is too low to to be measured limit. Another alarm is triggered if the speed is too low to be measured
(including stalled or missing fan). (including stalled or missing fan).

View file

@ -96,7 +96,7 @@ Example code - drivers hinting an alpha2:
This example comes from the zd1211rw device driver. You can start This example comes from the zd1211rw device driver. You can start
by having a mapping of your device's EEPROM country/regulatory by having a mapping of your device's EEPROM country/regulatory
domain value to to a specific alpha2 as follows: domain value to a specific alpha2 as follows:
static struct zd_reg_alpha2_map reg_alpha2_map[] = { static struct zd_reg_alpha2_map reg_alpha2_map[] = {
{ ZD_REGDOMAIN_FCC, "US" }, { ZD_REGDOMAIN_FCC, "US" },

View file

@ -378,7 +378,7 @@ Vport Disable/Enable:
int vport_disable(struct fc_vport *vport, bool disable) int vport_disable(struct fc_vport *vport, bool disable)
where: where:
vport: Is vport to to be enabled or disabled vport: Is vport to be enabled or disabled
disable: If "true", the vport is to be disabled. disable: If "true", the vport is to be disabled.
If "false", the vport is to be enabled. If "false", the vport is to be enabled.

View file

@ -1270,7 +1270,7 @@ putreg (struct task_struct *child, int regno, unsigned int value)
case PT_CS: case PT_CS:
if (value != __USER_CS) if (value != __USER_CS)
printk(KERN_ERR printk(KERN_ERR
"ia32.putreg: attempt to to set invalid segment register %d = %x\n", "ia32.putreg: attempt to set invalid segment register %d = %x\n",
regno, value); regno, value);
break; break;
default: default:

View file

@ -29,7 +29,7 @@ extern int ptrace_setregs(long pid, unsigned long *regs_in);
* recompilation. So, we use PTRACE_OLDSETOPTIONS in UML. * recompilation. So, we use PTRACE_OLDSETOPTIONS in UML.
* We also want to be able to build the kernel on 2.4, which doesn't * We also want to be able to build the kernel on 2.4, which doesn't
* have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare * have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare
* PTRACE_OLDSETOPTIONS to to be the same as PTRACE_SETOPTIONS. * PTRACE_OLDSETOPTIONS to be the same as PTRACE_SETOPTIONS.
* *
* On architectures, that start to support PTRACE_O_TRACESYSGOOD on * On architectures, that start to support PTRACE_O_TRACESYSGOOD on
* linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't * linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't

View file

@ -270,7 +270,7 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) { if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) {
/* /*
* We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1, * We need to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
* 2.2 and 2.3, Darwin do so. * 2.2 and 2.3, Darwin do so.
*/ */
if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7) if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7)

View file

@ -239,7 +239,7 @@ static __inline__ void mga_g200_emit_pipe(drm_mga_private_t * dev_priv)
MGA_WR34, 0x00000000, MGA_WR34, 0x00000000,
MGA_WR42, 0x0000ffff, MGA_WR60, 0x0000ffff); MGA_WR42, 0x0000ffff, MGA_WR60, 0x0000ffff);
/* Padding required to to hardware bug. /* Padding required due to hardware bug.
*/ */
DMA_BLOCK(MGA_DMAPAD, 0xffffffff, DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff,
@ -317,7 +317,7 @@ static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv)
MGA_WR52, MGA_G400_WR_MAGIC, /* tex1 width */ MGA_WR52, MGA_G400_WR_MAGIC, /* tex1 width */
MGA_WR60, MGA_G400_WR_MAGIC); /* tex1 height */ MGA_WR60, MGA_G400_WR_MAGIC); /* tex1 height */
/* Padding required to to hardware bug */ /* Padding required due to hardware bug */
DMA_BLOCK(MGA_DMAPAD, 0xffffffff, DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff,
MGA_DMAPAD, 0xffffffff, MGA_DMAPAD, 0xffffffff,

View file

@ -894,7 +894,7 @@ void guest_set_pte(struct lg_cpu *cpu,
* tells us they've changed. When the Guest tries to use the new entry it will * tells us they've changed. When the Guest tries to use the new entry it will
* fault and demand_page() will fix it up. * fault and demand_page() will fix it up.
* *
* So with that in mind here's our code to to update a (top-level) PGD entry: * So with that in mind here's our code to update a (top-level) PGD entry:
*/ */
void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx) void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
{ {

View file

@ -56,7 +56,7 @@ int m5602_read_bridge(struct sd *sd, const u8 address, u8 *i2c_data)
return (err < 0) ? err : 0; return (err < 0) ? err : 0;
} }
/* Writes a byte to to the m5602 */ /* Writes a byte to the m5602 */
int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data) int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data)
{ {
int err; int err;

View file

@ -512,7 +512,7 @@ static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
} }
/* For the DMA case the DMA engine handles the data transfer /* For the DMA case the DMA engine handles the data transfer
* automatically. For non DMA we have to to it ourselves. * automatically. For non DMA we have to do it ourselves.
* Don't do it in interrupt context though. * Don't do it in interrupt context though.
*/ */
if (!mxcmci_use_dma(host) && host->data) if (!mxcmci_use_dma(host) && host->data)

View file

@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
info->map.bankwidth = 1; info->map.bankwidth = 1;
/* /*
* map_priv_2 is used to store a ptr to to the bank_setup routine * map_priv_2 is used to store a ptr to the bank_setup routine
*/ */
info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup; info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup;

View file

@ -1065,7 +1065,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
} }
/* /*
* Now we have got to calculate how much data we have to to copy. In * Now we have got to calculate how much data we have to copy. In
* case of a static volume it is fairly easy - the VID header contains * case of a static volume it is fairly easy - the VID header contains
* the data size. In case of a dynamic volume it is more difficult - we * the data size. In case of a dynamic volume it is more difficult - we
* have to read the contents, cut 0xFF bytes from the end and copy only * have to read the contents, cut 0xFF bytes from the end and copy only

View file

@ -570,7 +570,7 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
/* /*
* ubi_rb_for_each_entry - walk an RB-tree. * ubi_rb_for_each_entry - walk an RB-tree.
* @rb: a pointer to type 'struct rb_node' to to use as a loop counter * @rb: a pointer to type 'struct rb_node' to use as a loop counter
* @pos: a pointer to RB-tree entry type to use as a loop counter * @pos: a pointer to RB-tree entry type to use as a loop counter
* @root: RB-tree's root * @root: RB-tree's root
* @member: the name of the 'struct rb_node' within the RB-tree entry * @member: the name of the 'struct rb_node' within the RB-tree entry

View file

@ -1987,7 +1987,7 @@ void bond_3ad_unbind_slave(struct slave *slave)
// find new aggregator for the related port(s) // find new aggregator for the related port(s)
new_aggregator = __get_first_agg(port); new_aggregator = __get_first_agg(port);
for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) { for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) {
// if the new aggregator is empty, or it connected to to our port only // if the new aggregator is empty, or it is connected to our port only
if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) { if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) {
break; break;
} }

View file

@ -3035,7 +3035,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
/* If TBI compatibility is was previously off, turn it on. For /* If TBI compatibility is was previously off, turn it on. For
* compatibility with a TBI link partner, we will store bad * compatibility with a TBI link partner, we will store bad
* packets. Some frames have an additional byte on the end and * packets. Some frames have an additional byte on the end and
* will look like CRC errors to to the hardware. * will look like CRC errors to the hardware.
*/ */
if (!hw->tbi_compatibility_on) { if (!hw->tbi_compatibility_on) {
hw->tbi_compatibility_on = true; hw->tbi_compatibility_on = true;

View file

@ -368,7 +368,7 @@ error:
return r; return r;
} }
/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and /* MAC address: if custom mac addresses are to be used CR_MAC_ADDR_P1 and
* CR_MAC_ADDR_P2 must be overwritten * CR_MAC_ADDR_P2 must be overwritten
*/ */
int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr) int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr)

View file

@ -718,7 +718,7 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
* megasas_build_ldio - Prepares IOs to logical devices * megasas_build_ldio - Prepares IOs to logical devices
* @instance: Adapter soft state * @instance: Adapter soft state
* @scp: SCSI command * @scp: SCSI command
* @cmd: Command to to be prepared * @cmd: Command to be prepared
* *
* Frames (and accompanying SGLs) for regular SCSI IOs use this function. * Frames (and accompanying SGLs) for regular SCSI IOs use this function.
*/ */

View file

@ -1422,7 +1422,7 @@ static void qla4xxx_slave_destroy(struct scsi_device *sdev)
/** /**
* qla4xxx_del_from_active_array - returns an active srb * qla4xxx_del_from_active_array - returns an active srb
* @ha: Pointer to host adapter structure. * @ha: Pointer to host adapter structure.
* @index: index into to the active_array * @index: index into the active_array
* *
* This routine removes and returns the srb at the specified index * This routine removes and returns the srb at the specified index
**/ **/
@ -1500,7 +1500,7 @@ static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
/** /**
* qla4xxx_eh_wait_for_commands - wait for active cmds to finish. * qla4xxx_eh_wait_for_commands - wait for active cmds to finish.
* @ha: pointer to to HBA * @ha: pointer to HBA
* @t: target id * @t: target id
* @l: lun id * @l: lun id
* *

View file

@ -2060,7 +2060,7 @@ typedef struct _STA_ADMIN_CONFIG {
BOOLEAN AdhocBGJoined; // Indicate Adhoc B/G Join. BOOLEAN AdhocBGJoined; // Indicate Adhoc B/G Join.
BOOLEAN Adhoc20NJoined; // Indicate Adhoc 20MHz N Join. BOOLEAN Adhoc20NJoined; // Indicate Adhoc 20MHz N Join.
#endif #endif
// New for WPA, windows want us to to keep association information and // New for WPA, windows want us to keep association information and
// Fixed IEs from last association response // Fixed IEs from last association response
NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo; NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
USHORT ReqVarIELen; // Length of next VIE include EID & Length USHORT ReqVarIELen; // Length of next VIE include EID & Length

View file

@ -57,7 +57,7 @@
#define UART_RI 0x10 /* ring indicator - modem - device to host */ #define UART_RI 0x10 /* ring indicator - modem - device to host */
#define UART_CD 0x40 /* carrier detect - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */
#define CYP_ERROR 0x08 /* received from input report - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */
/* Note - the below has nothing to to with the "feature report" reset */ /* Note - the below has nothing to do with the "feature report" reset */
#define CONTROL_RESET 0x08 /* sent with output report - host to device */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */
/* End of RS-232 protocol definitions */ /* End of RS-232 protocol definitions */

View file

@ -2540,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
/***************************************************************************** /*****************************************************************************
* send_cmd_write_uart_register * send_cmd_write_uart_register
* this function builds up a uart register message and sends to to the device. * this function builds up a uart register message and sends to the device.
*****************************************************************************/ *****************************************************************************/
static int send_cmd_write_uart_register(struct edgeport_port *edge_port, static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
__u8 regNum, __u8 regValue) __u8 regNum, __u8 regValue)

View file

@ -38,7 +38,7 @@
* 0.3a - implemented pools of write URBs * 0.3a - implemented pools of write URBs
* 0.3 - alpha version for public testing * 0.3 - alpha version for public testing
* 0.2 - TIOCMGET works, so autopilot(1) can be used! * 0.2 - TIOCMGET works, so autopilot(1) can be used!
* 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l * 0.1 - can be used to do pilot-xfer -p /dev/ttyUSB0 -l
* *
* The driver skeleton is mainly based on mct_u232.c and various other * The driver skeleton is mainly based on mct_u232.c and various other
* pieces of code shamelessly copied from the drivers/usb/serial/ directory. * pieces of code shamelessly copied from the drivers/usb/serial/ directory.

View file

@ -2337,7 +2337,7 @@ static int __mpage_da_writepage(struct page *page,
/* /*
* Rest of the page in the page_vec * Rest of the page in the page_vec
* redirty then and skip then. We will * redirty then and skip then. We will
* try to to write them again after * try to write them again after
* starting a new transaction * starting a new transaction
*/ */
redirty_page_for_writepage(wbc, page); redirty_page_for_writepage(wbc, page);

View file

@ -179,7 +179,7 @@ static inline u64 gfs2_bit_search(const __le64 *ptr, u64 mask, u8 state)
* always aligned to a 64 bit boundary. * always aligned to a 64 bit boundary.
* *
* The size of the buffer is in bytes, but is it assumed that it is * The size of the buffer is in bytes, but is it assumed that it is
* always ok to to read a complete multiple of 64 bits at the end * always ok to read a complete multiple of 64 bits at the end
* of the block in case the end is no aligned to a natural boundary. * of the block in case the end is no aligned to a natural boundary.
* *
* Return: the block number (bitmap buffer scope) that was found * Return: the block number (bitmap buffer scope) that was found

View file

@ -829,7 +829,7 @@ enum {
/* Note, FILE_ATTR_VALID_SET_FLAGS masks out the old DOS VolId, the /* Note, FILE_ATTR_VALID_SET_FLAGS masks out the old DOS VolId, the
F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT, F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT,
F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask
is used to to obtain all flags that are valid for setting. */ is used to obtain all flags that are valid for setting. */
/* /*
* The flag FILE_ATTR_DUP_FILENAME_INDEX_PRESENT is present in all * The flag FILE_ATTR_DUP_FILENAME_INDEX_PRESENT is present in all
* FILENAME_ATTR attributes but not in the STANDARD_INFORMATION * FILENAME_ATTR attributes but not in the STANDARD_INFORMATION

View file

@ -288,7 +288,7 @@ typedef u32 acpi_physical_address;
/* /*
* Some compilers complain about unused variables. Sometimes we don't want to * Some compilers complain about unused variables. Sometimes we don't want to
* use all the variables (for example, _acpi_module_name). This allows us * use all the variables (for example, _acpi_module_name). This allows us
* to to tell the compiler in a per-variable manner that a variable * to tell the compiler in a per-variable manner that a variable
* is unused * is unused
*/ */
#ifndef ACPI_UNUSED_VAR #ifndef ACPI_UNUSED_VAR

View file

@ -57,7 +57,7 @@
/* /*
* Some compilers complain about unused variables. Sometimes we don't want to * Some compilers complain about unused variables. Sometimes we don't want to
* use all the variables (for example, _acpi_module_name). This allows us * use all the variables (for example, _acpi_module_name). This allows us
* to to tell the compiler warning in a per-variable manner that a variable * to tell the compiler warning in a per-variable manner that a variable
* is unused. * is unused.
*/ */
#define ACPI_UNUSED_VAR __attribute__ ((unused)) #define ACPI_UNUSED_VAR __attribute__ ((unused))

View file

@ -482,7 +482,7 @@ int ib_send_cm_rej(struct ib_cm_id *cm_id,
* message. * message.
* @cm_id: Connection identifier associated with the connection message. * @cm_id: Connection identifier associated with the connection message.
* @service_timeout: The lower 5-bits specify the maximum time required for * @service_timeout: The lower 5-bits specify the maximum time required for
* the sender to reply to to the connection message. The upper 3-bits * the sender to reply to the connection message. The upper 3-bits
* specify additional control flags. * specify additional control flags.
* @private_data: Optional user-defined private data sent with the * @private_data: Optional user-defined private data sent with the
* message receipt acknowledgement. * message receipt acknowledgement.

View file

@ -48,7 +48,7 @@ static struct hlist_head tracepoint_table[TRACEPOINT_TABLE_SIZE];
/* /*
* Note about RCU : * Note about RCU :
* It is used to to delay the free of multiple probes array until a quiescent * It is used to delay the free of multiple probes array until a quiescent
* state is reached. * state is reached.
* Tracepoint entries modifications are protected by the tracepoints_mutex. * Tracepoint entries modifications are protected by the tracepoints_mutex.
*/ */

View file

@ -135,7 +135,7 @@ static const config configuration_table[10] = {
/* =========================================================================== /* ===========================================================================
* Update a hash value with the given input byte * Update a hash value with the given input byte
* IN assertion: all calls to to UPDATE_HASH are made with consecutive * IN assertion: all calls to UPDATE_HASH are made with consecutive
* input characters, so that a running hash key can be computed from the * input characters, so that a running hash key can be computed from the
* previous key instead of complete recalculation each time. * previous key instead of complete recalculation each time.
*/ */
@ -146,7 +146,7 @@ static const config configuration_table[10] = {
* Insert string str in the dictionary and set match_head to the previous head * Insert string str in the dictionary and set match_head to the previous head
* of the hash chain (the most recent string with same hash key). Return * of the hash chain (the most recent string with same hash key). Return
* the previous length of the hash chain. * the previous length of the hash chain.
* IN assertion: all calls to to INSERT_STRING are made with consecutive * IN assertion: all calls to INSERT_STRING are made with consecutive
* input characters and the first MIN_MATCH bytes of str are valid * input characters and the first MIN_MATCH bytes of str are valid
* (except for the last MIN_MATCH-1 bytes of the input file). * (except for the last MIN_MATCH-1 bytes of the input file).
*/ */

View file

@ -96,7 +96,7 @@ static struct rxrpc_call *rxrpc_alloc_call(gfp_t gfp)
} }
/* /*
* allocate a new client call and attempt to to get a connection slot for it * allocate a new client call and attempt to get a connection slot for it
*/ */
static struct rxrpc_call *rxrpc_alloc_client_call( static struct rxrpc_call *rxrpc_alloc_client_call(
struct rxrpc_sock *rx, struct rxrpc_sock *rx,

View file

@ -77,7 +77,7 @@
* The service curve parameters are converted to the internal * The service curve parameters are converted to the internal
* representation. The slope values are scaled to avoid overflow. * representation. The slope values are scaled to avoid overflow.
* the inverse slope values as well as the y-projection of the 1st * the inverse slope values as well as the y-projection of the 1st
* segment are kept in order to to avoid 64-bit divide operations * segment are kept in order to avoid 64-bit divide operations
* that are expensive on 32-bit architectures. * that are expensive on 32-bit architectures.
*/ */