trivial: fix typo "to to" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/hwmon/pc87427

@@ -34,5 +34,5 @@ Fan rotation speeds are reported as 14-bit values from a gated clock
 signal. Speeds down to 83 RPM can be measured.
 
 An alarm is triggered if the rotation speed drops below a programmable
-limit. Another alarm is triggered if the speed is too low to to be measured
+limit. Another alarm is triggered if the speed is too low to be measured
 (including stalled or missing fan).

Documentation/networking/regulatory.txt

@@ -96,7 +96,7 @@ Example code - drivers hinting an alpha2:
 
 This example comes from the zd1211rw device driver. You can start
 by having a mapping of your device's EEPROM country/regulatory
-domain value to to a specific alpha2 as follows:
+domain value to a specific alpha2 as follows:
 
 static struct zd_reg_alpha2_map reg_alpha2_map[] = {
 	{ ZD_REGDOMAIN_FCC, "US" },

Documentation/scsi/scsi_fc_transport.txt

@@ -378,7 +378,7 @@ Vport Disable/Enable:
       int vport_disable(struct fc_vport *vport, bool disable)
 
     where:
-      vport:    Is vport to to be enabled or disabled
+      vport:    Is vport to be enabled or disabled
       disable:  If "true", the vport is to be disabled.
                 If "false", the vport is to be enabled.
 

arch/ia64/ia32/sys_ia32.c

@@ -1270,7 +1270,7 @@ putreg (struct task_struct *child, int regno, unsigned int value)
 	      case PT_CS:
 		if (value != __USER_CS)
 			printk(KERN_ERR
-			       "ia32.putreg: attempt to to set invalid segment register %d = %x\n",
+			       "ia32.putreg: attempt to set invalid segment register %d = %x\n",
 			       regno, value);
 		break;
 	      default:

arch/um/include/shared/ptrace_user.h

@@ -29,7 +29,7 @@ extern int ptrace_setregs(long pid, unsigned long *regs_in);
  * recompilation. So, we use PTRACE_OLDSETOPTIONS in UML.
  * We also want to be able to build the kernel on 2.4, which doesn't
  * have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare
- * PTRACE_OLDSETOPTIONS to to be the same as PTRACE_SETOPTIONS.
+ * PTRACE_OLDSETOPTIONS to be the same as PTRACE_SETOPTIONS.
  *
  * On architectures, that start to support PTRACE_O_TRACESYSGOOD on
  * linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't

drivers/char/agp/uninorth-agp.c

@@ -270,7 +270,7 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
 
 	if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) {
 		/*
-		 * We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
+		 * We need to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
 		 * 2.2 and 2.3, Darwin do so.
 		 */
 		if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7)

drivers/gpu/drm/mga/mga_state.c

@@ -239,7 +239,7 @@ static __inline__ void mga_g200_emit_pipe(drm_mga_private_t * dev_priv)
 		  MGA_WR34, 0x00000000,
 		  MGA_WR42, 0x0000ffff, MGA_WR60, 0x0000ffff);
 
-	/* Padding required to to hardware bug.
+	/* Padding required due to hardware bug.
 	 */
 	DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
 		  MGA_DMAPAD, 0xffffffff,
@@ -317,7 +317,7 @@ static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv)
 		  MGA_WR52, MGA_G400_WR_MAGIC,	/* tex1 width        */
 		  MGA_WR60, MGA_G400_WR_MAGIC);	/* tex1 height       */
 
-	/* Padding required to to hardware bug */
+	/* Padding required due to hardware bug */
 	DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
 		  MGA_DMAPAD, 0xffffffff,
 		  MGA_DMAPAD, 0xffffffff,

drivers/lguest/page_tables.c

@@ -894,7 +894,7 @@ void guest_set_pte(struct lg_cpu *cpu,
  * tells us they've changed.  When the Guest tries to use the new entry it will
  * fault and demand_page() will fix it up.
  *
- * So with that in mind here's our code to to update a (top-level) PGD entry:
+ * So with that in mind here's our code to update a (top-level) PGD entry:
  */
 void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 {

drivers/media/video/gspca/m5602/m5602_core.c

@@ -56,7 +56,7 @@ int m5602_read_bridge(struct sd *sd, const u8 address, u8 *i2c_data)
 	return (err < 0) ? err : 0;
 }
 
-/* Writes a byte to to the m5602 */
+/* Writes a byte to the m5602 */
 int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data)
 {
 	int err;

drivers/mmc/host/mxcmmc.c

@@ -512,7 +512,7 @@ static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
 	}
 
 	/* For the DMA case the DMA engine handles the data transfer
-	 * automatically. For non DMA we have to to it ourselves.
+	 * automatically. For non DMA we have to do it ourselves.
 	 * Don't do it in interrupt context though.
 	 */
 	if (!mxcmci_use_dma(host) && host->data)

drivers/mtd/maps/ixp2000.c

@@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 	info->map.bankwidth = 1;
 
 	/*
- 	 * map_priv_2 is used to store a ptr to to the bank_setup routine
+ 	 * map_priv_2 is used to store a ptr to the bank_setup routine
  	 */
 	info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup;
 

drivers/mtd/ubi/eba.c

@@ -1065,7 +1065,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	}
 
 	/*
-	 * Now we have got to calculate how much data we have to to copy. In
+	 * Now we have got to calculate how much data we have to copy. In
 	 * case of a static volume it is fairly easy - the VID header contains
 	 * the data size. In case of a dynamic volume it is more difficult - we
 	 * have to read the contents, cut 0xFF bytes from the end and copy only

drivers/mtd/ubi/ubi.h

@@ -570,7 +570,7 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
 
 /*
  * ubi_rb_for_each_entry - walk an RB-tree.
- * @rb: a pointer to type 'struct rb_node' to to use as a loop counter
+ * @rb: a pointer to type 'struct rb_node' to use as a loop counter
  * @pos: a pointer to RB-tree entry type to use as a loop counter
  * @root: RB-tree's root
  * @member: the name of the 'struct rb_node' within the RB-tree entry

drivers/net/bonding/bond_3ad.c

@@ -1987,7 +1987,7 @@ void bond_3ad_unbind_slave(struct slave *slave)
 			// find new aggregator for the related port(s)
 			new_aggregator = __get_first_agg(port);
 			for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) {
-				// if the new aggregator is empty, or it connected to to our port only
+				// if the new aggregator is empty, or it is connected to our port only
 				if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) {
 					break;
 				}

drivers/net/e1000/e1000_hw.c

@@ -3035,7 +3035,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
                 /* If TBI compatibility is was previously off, turn it on. For
                  * compatibility with a TBI link partner, we will store bad
                  * packets. Some frames have an additional byte on the end and
-                 * will look like CRC errors to to the hardware.
+                 * will look like CRC errors to the hardware.
                  */
                 if (!hw->tbi_compatibility_on) {
                     hw->tbi_compatibility_on = true;

drivers/net/wireless/zd1211rw/zd_chip.c

@@ -368,7 +368,7 @@ error:
 	return r;
 }
 
-/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and
+/* MAC address: if custom mac addresses are to be used CR_MAC_ADDR_P1 and
  *              CR_MAC_ADDR_P2 must be overwritten
  */
 int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr)

drivers/scsi/megaraid/megaraid_sas.c

@@ -718,7 +718,7 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
  * megasas_build_ldio -	Prepares IOs to logical devices
  * @instance:		Adapter soft state
  * @scp:		SCSI command
- * @cmd:		Command to to be prepared
+ * @cmd:		Command to be prepared
  *
  * Frames (and accompanying SGLs) for regular SCSI IOs use this function.
  */

drivers/scsi/qla4xxx/ql4_os.c

@@ -1422,7 +1422,7 @@ static void qla4xxx_slave_destroy(struct scsi_device *sdev)
 /**
  * qla4xxx_del_from_active_array - returns an active srb
  * @ha: Pointer to host adapter structure.
- * @index: index into to the active_array
+ * @index: index into the active_array
  *
  * This routine removes and returns the srb at the specified index
  **/
@@ -1500,7 +1500,7 @@ static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
 
 /**
  * qla4xxx_eh_wait_for_commands - wait for active cmds to finish.
- * @ha: pointer to to HBA
+ * @ha: pointer to HBA
  * @t: target id
  * @l: lun id
  *

drivers/staging/rt2860/rtmp.h

@@ -2060,7 +2060,7 @@ typedef struct _STA_ADMIN_CONFIG {
     BOOLEAN		AdhocBGJoined;		// Indicate Adhoc B/G Join.
     BOOLEAN		Adhoc20NJoined;		// Indicate Adhoc 20MHz N Join.
 #endif
-	// New for WPA, windows want us to to keep association information and
+	// New for WPA, windows want us to keep association information and
 	// Fixed IEs from last association response
 	NDIS_802_11_ASSOCIATION_INFORMATION     AssocInfo;
 	USHORT       ReqVarIELen;                // Length of next VIE include EID & Length

drivers/usb/serial/cypress_m8.h

@@ -57,7 +57,7 @@
 #define	UART_RI		0x10	/* ring indicator - modem - device to host */
 #define UART_CD		0x40	/* carrier detect - modem - device to host */
 #define CYP_ERROR 	0x08	/* received from input report - device to host */
-/* Note - the below has nothing to to with the "feature report" reset */
+/* Note - the below has nothing to do with the "feature report" reset */
 #define CONTROL_RESET	0x08  	/* sent with output report - host to device */
 
 /* End of RS-232 protocol definitions */

drivers/usb/serial/io_edgeport.c

@@ -2540,7 +2540,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
 
 /*****************************************************************************
  * send_cmd_write_uart_register
- *  this function builds up a uart register message and sends to to the device.
+ *  this function builds up a uart register message and sends to the device.
  *****************************************************************************/
 static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
 						__u8 regNum, __u8 regValue)

drivers/usb/serial/kl5kusb105.c

@@ -38,7 +38,7 @@
  *   0.3a - implemented pools of write URBs
  *   0.3  - alpha version for public testing
  *   0.2  - TIOCMGET works, so autopilot(1) can be used!
- *   0.1  - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
+ *   0.1  - can be used to do pilot-xfer -p /dev/ttyUSB0 -l
  *
  *   The driver skeleton is mainly based on mct_u232.c and various other
  *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.

fs/ext4/inode.c

@@ -2337,7 +2337,7 @@ static int __mpage_da_writepage(struct page *page,
 		/*
 		 * Rest of the page in the page_vec
 		 * redirty then and skip then. We will
-		 * try to to write them again after
+		 * try to write them again after
 		 * starting a new transaction
 		 */
 		redirty_page_for_writepage(wbc, page);

fs/gfs2/rgrp.c

@@ -179,7 +179,7 @@ static inline u64 gfs2_bit_search(const __le64 *ptr, u64 mask, u8 state)
  * always aligned to a 64 bit boundary.
  *
  * The size of the buffer is in bytes, but is it assumed that it is
- * always ok to to read a complete multiple of 64 bits at the end
+ * always ok to read a complete multiple of 64 bits at the end
  * of the block in case the end is no aligned to a natural boundary.
  *
  * Return: the block number (bitmap buffer scope) that was found

fs/ntfs/layout.h

@@ -829,7 +829,7 @@ enum {
 	/* Note, FILE_ATTR_VALID_SET_FLAGS masks out the old DOS VolId, the
 	   F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT,
 	   F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest.  This mask
-	   is used to to obtain all flags that are valid for setting. */
+	   is used to obtain all flags that are valid for setting. */
 	/*
 	 * The flag FILE_ATTR_DUP_FILENAME_INDEX_PRESENT is present in all
 	 * FILENAME_ATTR attributes but not in the STANDARD_INFORMATION

include/acpi/actypes.h

@@ -288,7 +288,7 @@ typedef u32 acpi_physical_address;
 /*
  * Some compilers complain about unused variables. Sometimes we don't want to
  * use all the variables (for example, _acpi_module_name). This allows us
- * to to tell the compiler in a per-variable manner that a variable
+ * to tell the compiler in a per-variable manner that a variable
  * is unused
  */
 #ifndef ACPI_UNUSED_VAR

include/acpi/platform/acgcc.h

@@ -57,7 +57,7 @@
 /*
  * Some compilers complain about unused variables. Sometimes we don't want to
  * use all the variables (for example, _acpi_module_name). This allows us
- * to to tell the compiler warning in a per-variable manner that a variable
+ * to tell the compiler warning in a per-variable manner that a variable
  * is unused.
  */
 #define ACPI_UNUSED_VAR __attribute__ ((unused))

include/rdma/ib_cm.h

@@ -482,7 +482,7 @@ int ib_send_cm_rej(struct ib_cm_id *cm_id,
  *   message.
  * @cm_id: Connection identifier associated with the connection message.
  * @service_timeout: The lower 5-bits specify the maximum time required for
- *   the sender to reply to to the connection message.  The upper 3-bits
+ *   the sender to reply to the connection message.  The upper 3-bits
  *   specify additional control flags.
  * @private_data: Optional user-defined private data sent with the
  *   message receipt acknowledgement.

kernel/tracepoint.c

@@ -48,7 +48,7 @@ static struct hlist_head tracepoint_table[TRACEPOINT_TABLE_SIZE];
 
 /*
  * Note about RCU :
- * It is used to to delay the free of multiple probes array until a quiescent
+ * It is used to delay the free of multiple probes array until a quiescent
  * state is reached.
  * Tracepoint entries modifications are protected by the tracepoints_mutex.
  */

lib/zlib_deflate/deflate.c

@@ -135,7 +135,7 @@ static const config configuration_table[10] = {
 
 /* ===========================================================================
  * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
+ * IN  assertion: all calls to UPDATE_HASH are made with consecutive
  *    input characters, so that a running hash key can be computed from the
  *    previous key instead of complete recalculation each time.
  */
@@ -146,7 +146,7 @@ static const config configuration_table[10] = {
  * Insert string str in the dictionary and set match_head to the previous head
  * of the hash chain (the most recent string with same hash key). Return
  * the previous length of the hash chain.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
+ * IN  assertion: all calls to INSERT_STRING are made with consecutive
  *    input characters and the first MIN_MATCH bytes of str are valid
  *    (except for the last MIN_MATCH-1 bytes of the input file).
  */

net/rxrpc/ar-call.c

@@ -96,7 +96,7 @@ static struct rxrpc_call *rxrpc_alloc_call(gfp_t gfp)
 }
 
 /*
- * allocate a new client call and attempt to to get a connection slot for it
+ * allocate a new client call and attempt to get a connection slot for it
  */
 static struct rxrpc_call *rxrpc_alloc_client_call(
 	struct rxrpc_sock *rx,

net/sched/sch_hfsc.c

@@ -77,7 +77,7 @@
  *   The service curve parameters are converted to the internal
  *   representation. The slope values are scaled to avoid overflow.
  *   the inverse slope values as well as the y-projection of the 1st
- *   segment are kept in order to to avoid 64-bit divide operations
+ *   segment are kept in order to avoid 64-bit divide operations
  *   that are expensive on 32-bit architectures.
  */