Merge git://git.infradead.org/users/cbou/battery-2.6.31

* git://git.infradead.org/users/cbou/battery-2.6.31:
  Add ds2782 battery gas gauge driver
  olpc_battery: Ensure that the TRICKLE bit is checked
  olpc_battery: Fix up eeprom read function

drivers/power/Kconfig

@@ -43,6 +43,13 @@ config BATTERY_DS2760
 	help
 	  Say Y here to enable support for batteries with ds2760 chip.
 
+config BATTERY_DS2782
+	tristate "DS2782 standalone gas-gauge"
+	depends on I2C
+	help
+	  Say Y here to enable support for the DS2782 standalone battery
+	  gas-gauge.
+
 config BATTERY_PMU
 	tristate "Apple PMU battery"
 	depends on PPC32 && ADB_PMU

drivers/power/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o

drivers/power/ds2782_battery.c

@@ -0,0 +1,330 @@
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+
+#define DS2782_REG_RARC		0x06	/* Remaining active relative capacity */
+
+#define DS2782_REG_VOLT_MSB	0x0c
+#define DS2782_REG_TEMP_MSB	0x0a
+#define DS2782_REG_CURRENT_MSB	0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP	0x69	/* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS	1563
+
+#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
+
+struct ds2782_info {
+	struct i2c_client	*client;
+	struct power_supply	battery;
+	int			id;
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(info->client, reg);
+	if (ret < 0) {
+		dev_err(&info->client->dev, "register read failed\n");
+		return ret;
+	}
+
+	*val = ret;
+	return 0;
+}
+
+static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
+				    s16 *val)
+{
+	int ret;
+
+	ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
+	if (ret < 0) {
+		dev_err(&info->client->dev, "register read failed\n");
+		return ret;
+	}
+
+	*val = ret;
+	return 0;
+}
+
+static int ds2782_get_temp(struct ds2782_info *info, int *temp)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Temperature is measured in units of 0.125 degrees celcius, the
+	 * power_supply class measures temperature in tenths of degrees
+	 * celsius. The temperature value is stored as a 10 bit number, plus
+	 * sign in the upper bits of a 16 bit register.
+	 */
+	err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
+	if (err)
+		return err;
+	*temp = ((raw / 32) * 125) / 100;
+	return 0;
+}
+
+static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
+{
+	int sense_res;
+	int err;
+	u8 sense_res_raw;
+	s16 raw;
+
+	/*
+	 * The units of measurement for current are dependent on the value of
+	 * the sense resistor.
+	 */
+	err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+	if (err)
+		return err;
+	if (sense_res_raw == 0) {
+		dev_err(&info->client->dev, "sense resistor value is 0\n");
+		return -ENXIO;
+	}
+	sense_res = 1000 / sense_res_raw;
+
+	dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+		sense_res);
+	err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
+	if (err)
+		return err;
+	*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+	return 0;
+}
+
+static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Voltage is measured in units of 4.88mV. The voltage is stored as
+	 * a 10-bit number plus sign, in the upper bits of a 16-bit register
+	 */
+	err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
+	if (err)
+		return err;
+	*voltage_uA = (raw / 32) * 4800;
+	return 0;
+}
+
+static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
+{
+	int err;
+	u8 raw;
+
+	err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
+	if (err)
+		return err;
+	*capacity = raw;
+	return raw;
+}
+
+static int ds2782_get_status(struct ds2782_info *info, int *status)
+{
+	int err;
+	int current_uA;
+	int capacity;
+
+	err = ds2782_get_current(info, &current_uA);
+	if (err)
+		return err;
+
+	err = ds2782_get_capacity(info, &capacity);
+	if (err)
+		return err;
+
+	if (capacity == 100)
+		*status = POWER_SUPPLY_STATUS_FULL;
+	else if (current_uA == 0)
+		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	else if (current_uA < 0)
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+	else
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+
+	return 0;
+}
+
+static int ds2782_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property prop,
+				       union power_supply_propval *val)
+{
+	struct ds2782_info *info = to_ds2782_info(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = ds2782_get_status(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = ds2782_get_capacity(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ds2782_get_voltage(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ds2782_get_current(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = ds2782_get_temp(info, &val->intval);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property ds2782_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds2782_power_supply_init(struct power_supply *battery)
+{
+	battery->type			= POWER_SUPPLY_TYPE_BATTERY;
+	battery->properties		= ds2782_battery_props;
+	battery->num_properties		= ARRAY_SIZE(ds2782_battery_props);
+	battery->get_property		= ds2782_battery_get_property;
+	battery->external_power_changed	= NULL;
+}
+
+static int ds2782_battery_remove(struct i2c_client *client)
+{
+	struct ds2782_info *info = i2c_get_clientdata(client);
+
+	power_supply_unregister(&info->battery);
+	kfree(info->battery.name);
+
+	mutex_lock(&battery_lock);
+	idr_remove(&battery_id, info->id);
+	mutex_unlock(&battery_lock);
+
+	i2c_set_clientdata(client, info);
+
+	kfree(info);
+	return 0;
+}
+
+static int ds2782_battery_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct ds2782_info *info;
+	int ret;
+	int num;
+
+	/* Get an ID for this battery */
+	ret = idr_pre_get(&battery_id, GFP_KERNEL);
+	if (ret == 0) {
+		ret = -ENOMEM;
+		goto fail_id;
+	}
+
+	mutex_lock(&battery_lock);
+	ret = idr_get_new(&battery_id, client, &num);
+	mutex_unlock(&battery_lock);
+	if (ret < 0)
+		goto fail_id;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		ret = -ENOMEM;
+		goto fail_info;
+	}
+
+	info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
+	if (!info->battery.name) {
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+
+	i2c_set_clientdata(client, info);
+	info->client = client;
+	ds2782_power_supply_init(&info->battery);
+
+	ret = power_supply_register(&client->dev, &info->battery);
+	if (ret) {
+		dev_err(&client->dev, "failed to register battery\n");
+		goto fail_register;
+	}
+
+	return 0;
+
+fail_register:
+	kfree(info->battery.name);
+fail_name:
+	i2c_set_clientdata(client, info);
+	kfree(info);
+fail_info:
+	mutex_lock(&battery_lock);
+	idr_remove(&battery_id, num);
+	mutex_unlock(&battery_lock);
+fail_id:
+	return ret;
+}
+
+static const struct i2c_device_id ds2782_id[] = {
+	{"ds2782", 0},
+	{},
+};
+
+static struct i2c_driver ds2782_battery_driver = {
+	.driver 	= {
+		.name	= "ds2782-battery",
+	},
+	.probe		= ds2782_battery_probe,
+	.remove		= ds2782_battery_remove,
+	.id_table	= ds2782_id,
+};
+
+static int __init ds2782_init(void)
+{
+	return i2c_add_driver(&ds2782_battery_driver);
+}
+module_init(ds2782_init);
+
+static void __exit ds2782_exit(void)
+{
+	i2c_del_driver(&ds2782_battery_driver);
+}
+module_exit(ds2782_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
+MODULE_LICENSE("GPL");

drivers/power/olpc_battery.c

@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -35,6 +36,7 @@
 #define BAT_STAT_AC		0x10
 #define BAT_STAT_CHARGING	0x20
 #define BAT_STAT_DISCHARGING	0x40
+#define BAT_STAT_TRICKLE	0x80
 
 #define BAT_ERR_INFOFAIL	0x02
 #define BAT_ERR_OVERVOLTAGE	0x04
@@ -89,7 +91,7 @@ static char bat_serial[17]; /* Ick */
 static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
 {
 	if (olpc_platform_info.ecver > 0x44) {
-		if (ec_byte & BAT_STAT_CHARGING)
+		if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (ec_byte & BAT_STAT_DISCHARGING)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
@@ -219,7 +221,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	   It doesn't matter though -- the EC will return the last-known
 	   information, and it's as if we just ran that _little_ bit faster
 	   and managed to read it out before the battery went away. */
-	if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+	if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+			psp != POWER_SUPPLY_PROP_PRESENT)
 		return -ENODEV;
 
 	switch (psp) {
@@ -229,7 +232,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
 			return ret;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
-		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+		val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+					    BAT_STAT_TRICKLE));
 		break;
 
 	case POWER_SUPPLY_PROP_HEALTH:
@@ -334,21 +338,21 @@ static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
 		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
 {
 	uint8_t ec_byte;
-	int ret, end;
+	int ret;
+	int i;
 
 	if (off >= EEPROM_SIZE)
 		return 0;
 	if (off + count > EEPROM_SIZE)
 		count = EEPROM_SIZE - off;
 
-	end = EEPROM_START + off + count;
+	for (i = 0; i < count; i++) {
-	for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
+		ec_byte = EEPROM_START + off + i;
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
-				&buf[ec_byte - EEPROM_START], 1);
 		if (ret) {
-			printk(KERN_ERR "olpc-battery:  EC command "
+			pr_err("olpc-battery: "
-					"EC_BAT_EEPROM @ 0x%x failed -"
+			       "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
-					" %d!\n", ec_byte, ret);
+			       ec_byte, ret);
 			return -EIO;
 		}
 	}