IB/ipath: tidy up white space in a few files

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
This commit is contained in:
Bryan O'Sullivan 2006-04-24 14:23:09 -07:00 committed by Roland Dreier
parent d562a5ae69
commit f6f0413e10
3 changed files with 31 additions and 21 deletions

View file

@ -60,11 +60,11 @@
#define __IPATH_KERNEL_SEND 0x2000 /* use kernel mode send */
#define __IPATH_EPKTDBG 0x4000 /* print ethernet packet data */
#define __IPATH_SMADBG 0x8000 /* sma packet debug */
#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) general debug on */
#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings on */
#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors on */
#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump on */
#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump on */
#define __IPATH_IPATHDBG 0x10000 /* Ethernet (IPATH) gen debug */
#define __IPATH_IPATHWARN 0x20000 /* Ethernet (IPATH) warnings */
#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors */
#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump */
#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump */
#else /* _IPATH_DEBUGGING */
@ -79,11 +79,12 @@
#define __IPATH_TRSAMPLE 0x0 /* generate trace buffer sample entries */
#define __IPATH_VERBDBG 0x0 /* very verbose debug */
#define __IPATH_PKTDBG 0x0 /* print packet data */
#define __IPATH_PROCDBG 0x0 /* print process startup (init)/exit messages */
#define __IPATH_PROCDBG 0x0 /* process startup (init)/exit messages */
/* print mmap/nopage stuff, not using VDBG any more */
#define __IPATH_MMDBG 0x0
#define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */
#define __IPATH_SMADBG 0x0 /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
#define __IPATH_SMADBG 0x0 /* process startup (init)/exit messages */
#define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */
#define __IPATH_IPATHWARN 0x0 /* Ethernet (IPATH) warnings on */
#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */
#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */

View file

@ -34,8 +34,9 @@
#define _IPATH_REGISTERS_H
/*
* This file should only be included by kernel source, and by the diags.
* It defines the registers, and their contents, for the InfiniPath HT-400 chip
* This file should only be included by kernel source, and by the diags. It
* defines the registers, and their contents, for the InfiniPath HT-400
* chip.
*/
/*
@ -156,8 +157,10 @@
#define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
#define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
#define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
#define INFINIPATH_IBCC_LINKINITCMD_POLL 2 /* cycle through TS1/TS2 till OK */
#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3 /* wait for TS1, then go on */
/* cycle through TS1/TS2 till OK */
#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
/* wait for TS1, then go on */
#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
#define INFINIPATH_IBCC_LINKCMD_INIT 1 /* move to 0x11 */
@ -182,7 +185,8 @@
#define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
#define INFINIPATH_IBCS_TXREADY 0x40000000
#define INFINIPATH_IBCS_TXCREDITOK 0x80000000
/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
/* link training states (shift by
INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
#define INFINIPATH_IBCS_LT_STATE_DISABLED 0x00
#define INFINIPATH_IBCS_LT_STATE_LINKUP 0x01
#define INFINIPATH_IBCS_LT_STATE_POLLACTIVE 0x02
@ -267,10 +271,12 @@
/* kr_serdesconfig0 bits */
#define INFINIPATH_SERDC0_RESET_MASK 0xfULL /* overal reset bits */
#define INFINIPATH_SERDC0_RESET_PLL 0x10000000ULL /* pll reset */
#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL /* tx idle enables (per lane) */
#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL /* rx detect enables (per lane) */
#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL /* L1 Power down; use with RXDETECT,
Otherwise not used on IB side */
/* tx idle enables (per lane) */
#define INFINIPATH_SERDC0_TXIDLE 0xF000ULL
/* rx detect enables (per lane) */
#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL
/* kr_xgxsconfig bits */
#define INFINIPATH_XGXS_RESET 0x7ULL
@ -390,12 +396,13 @@ struct ipath_kregs {
ipath_kreg kr_txintmemsize;
ipath_kreg kr_xgxsconfig;
ipath_kreg kr_ibpllcfg;
/* use these two (and the following N ports) only with ipath_k*_kreg64_port();
* not *kreg64() */
/* use these two (and the following N ports) only with
* ipath_k*_kreg64_port(); not *kreg64() */
ipath_kreg kr_rcvhdraddr;
ipath_kreg kr_rcvhdrtailaddr;
/* remaining registers are not present on all types of infinipath chips */
/* remaining registers are not present on all types of infinipath
chips */
ipath_kreg kr_rcvpktledcnt;
ipath_kreg kr_pcierbuftestreg0;
ipath_kreg kr_pcierbuftestreg1;

View file

@ -46,8 +46,10 @@
* This is called from ipath_post_ud_send() to forward a WQE addressed
* to the same HCA.
*/
static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_sge_state *ss,
u32 length, struct ib_send_wr *wr, struct ib_wc *wc)
static void ipath_ud_loopback(struct ipath_qp *sqp,
struct ipath_sge_state *ss,
u32 length, struct ib_send_wr *wr,
struct ib_wc *wc)
{
struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
struct ipath_qp *qp;