mirror of
https://github.com/adulau/aha.git
synced 2024-12-27 11:16:11 +00:00
sh: Remove old early serial console code V2
Now when the sh-sci driver can do early serial output, get rid of the old duplicated code. This patch is V2 and removes support for "earlyprintk=serial" together with the following kconfig options: CONFIG_EARLY_SCIF_CONSOLE CONFIG_EARLY_SCIF_CONSOLE_PORT CONFIG_EARLY_PRINTK With this patch applied "earlyprintk=" support is always built-in the SuperH kernel. For this to work the serial driver must have early platform support and in the case of sh-sci the serial console needs to be enabled: CONFIG_SERIAL_SH_SCI_CONSOLE=y So after enabling the SuperH SCI console kconfig option you also need to point out port using the kernel command line: "earlyprintk=sh-sci.N[,baudrate][,keep]" Remember that clocks may be disabled by the boot loader so you may have to do some board specific static clock setup before earlyprintk will work on your platform. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Magnus Damm
Paul Mundt
parent
d8d3fbb024
commit
e76fe57447
3 changed files with 1 additions and 193 deletions
|
|
@ -19,50 +19,6 @@ config SH_STANDARD_BIOS
|
|||
mask ROM and no flash (WindowsCE machines fall in this category).
|
||||
If unsure, say N.
|
||||
|
||||
config EARLY_SCIF_CONSOLE
|
||||
bool "Use early SCIF console"
|
||||
help
|
||||
This enables an early console using a fixed SCIF port. This can
|
||||
be used by platforms that are either not running the SH
|
||||
standard BIOS, or do not wish to use the BIOS callbacks for the
|
||||
serial I/O.
|
||||
|
||||
config EARLY_SCIF_CONSOLE_PORT
|
||||
hex
|
||||
depends on EARLY_SCIF_CONSOLE
|
||||
default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
|
||||
default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
|
||||
default "0xf8420000" if CPU_SUBTYPE_SH7619
|
||||
default "0xff804000" if CPU_SUBTYPE_MXG
|
||||
default "0xffc30000" if CPU_SUBTYPE_SHX3
|
||||
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
|
||||
CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
|
||||
CPU_SUBTYPE_SH7343
|
||||
default "0xfe4c0000" if CPU_SUBTYPE_SH7757
|
||||
default "0xffeb0000" if CPU_SUBTYPE_SH7785
|
||||
default "0xffeb0000" if CPU_SUBTYPE_SH7786
|
||||
default "0xfffe8000" if CPU_SUBTYPE_SH7203
|
||||
default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
|
||||
default "0xffe80000" if CPU_SH4
|
||||
default "0xa4000150" if CPU_SH3
|
||||
default "0x00000000"
|
||||
|
||||
config EARLY_PRINTK
|
||||
bool "Early printk support"
|
||||
depends on SH_STANDARD_BIOS || EARLY_SCIF_CONSOLE
|
||||
help
|
||||
Say Y here to redirect kernel printk messages to the serial port
|
||||
used by the SH-IPL bootloader, starting very early in the boot
|
||||
process and ending when the kernel's serial console is initialised.
|
||||
This option is only useful porting the kernel to a new machine,
|
||||
when the kernel may crash or hang before the serial console is
|
||||
initialised. If unsure, say N.
|
||||
|
||||
On devices that are running SH-IPL and want to keep the port
|
||||
initialization consistent while not using the BIOS callbacks,
|
||||
select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
|
||||
the kernel command line option to toggle back and forth.
|
||||
|
||||
config STACK_DEBUG
|
||||
bool "Check for stack overflows"
|
||||
depends on DEBUG_KERNEL && SUPERH32
|
||||
|
|
|
|||
|
|
@ -22,11 +22,10 @@ obj-y := debugtraps.o dma-nommu.o dumpstack.o \
|
|||
obj-y += cpu/
|
||||
obj-$(CONFIG_VSYSCALL) += vsyscall/
|
||||
obj-$(CONFIG_SMP) += smp.o
|
||||
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
|
||||
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o early_printk.o
|
||||
obj-$(CONFIG_KGDB) += kgdb.o
|
||||
obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
|
||||
obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o
|
||||
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
|
||||
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
|
||||
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
|
||||
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
||||
|
|
|
|||
|
|
@ -15,7 +15,6 @@
|
|||
#include <linux/io.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#ifdef CONFIG_SH_STANDARD_BIOS
|
||||
#include <asm/sh_bios.h>
|
||||
|
||||
/*
|
||||
|
|
@ -57,140 +56,7 @@ static struct console bios_console = {
|
|||
.flags = CON_PRINTBUFFER,
|
||||
.index = -1,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_EARLY_SCIF_CONSOLE
|
||||
#include <linux/serial_core.h>
|
||||
#include "../../../drivers/serial/sh-sci.h"
|
||||
|
||||
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
|
||||
defined(CONFIG_CPU_SUBTYPE_SH7721)
|
||||
#define EPK_SCSMR_VALUE 0x000
|
||||
#define EPK_SCBRR_VALUE 0x00C
|
||||
#define EPK_FIFO_SIZE 64
|
||||
#define EPK_FIFO_BITS (0x7f00 >> 8)
|
||||
#else
|
||||
#define EPK_FIFO_SIZE 16
|
||||
#define EPK_FIFO_BITS (0x1f00 >> 8)
|
||||
#endif
|
||||
|
||||
static struct uart_port scif_port = {
|
||||
.type = PORT_SCIF,
|
||||
.mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT,
|
||||
.membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
|
||||
};
|
||||
|
||||
static void scif_sercon_putc(int c)
|
||||
{
|
||||
while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE))
|
||||
;
|
||||
|
||||
sci_in(&scif_port, SCxSR);
|
||||
sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40));
|
||||
sci_out(&scif_port, SCxTDR, c);
|
||||
|
||||
while ((sci_in(&scif_port, SCxSR) & 0x40) == 0)
|
||||
;
|
||||
|
||||
if (c == '\n')
|
||||
scif_sercon_putc('\r');
|
||||
}
|
||||
|
||||
static void scif_sercon_write(struct console *con, const char *s,
|
||||
unsigned count)
|
||||
{
|
||||
while (count-- > 0)
|
||||
scif_sercon_putc(*s++);
|
||||
}
|
||||
|
||||
static int __init scif_sercon_setup(struct console *con, char *options)
|
||||
{
|
||||
con->cflag = CREAD | HUPCL | CLOCAL | B115200 | CS8;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct console scif_console = {
|
||||
.name = "sercon",
|
||||
.write = scif_sercon_write,
|
||||
.setup = scif_sercon_setup,
|
||||
.flags = CON_PRINTBUFFER,
|
||||
.index = -1,
|
||||
};
|
||||
|
||||
#if !defined(CONFIG_SH_STANDARD_BIOS)
|
||||
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
|
||||
defined(CONFIG_CPU_SUBTYPE_SH7721)
|
||||
static void scif_sercon_init(char *s)
|
||||
{
|
||||
sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */
|
||||
sci_out(&scif_port, SCFCR, 0x4006); /* reset */
|
||||
sci_out(&scif_port, SCSCR, 0x0000); /* select internal clock */
|
||||
sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE);
|
||||
sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE);
|
||||
|
||||
mdelay(1); /* wait 1-bit time */
|
||||
|
||||
sci_out(&scif_port, SCFCR, 0x0030); /* TTRG=b'11 */
|
||||
sci_out(&scif_port, SCSCR, 0x0030); /* TE, RE */
|
||||
}
|
||||
#elif defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
|
||||
#define DEFAULT_BAUD 115200
|
||||
/*
|
||||
* Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
|
||||
* devices that aren't using sh-ipl+g.
|
||||
*/
|
||||
static void scif_sercon_init(char *s)
|
||||
{
|
||||
struct uart_port *port = &scif_port;
|
||||
unsigned baud = DEFAULT_BAUD;
|
||||
unsigned int status;
|
||||
char *e;
|
||||
|
||||
if (*s == ',')
|
||||
++s;
|
||||
|
||||
if (*s) {
|
||||
/* ignore ioport/device name */
|
||||
s += strcspn(s, ",");
|
||||
if (*s == ',')
|
||||
s++;
|
||||
}
|
||||
|
||||
if (*s) {
|
||||
baud = simple_strtoul(s, &e, 0);
|
||||
if (baud == 0 || s == e)
|
||||
baud = DEFAULT_BAUD;
|
||||
}
|
||||
|
||||
do {
|
||||
status = sci_in(port, SCxSR);
|
||||
} while (!(status & SCxSR_TEND(port)));
|
||||
|
||||
sci_out(port, SCSCR, 0); /* TE=0, RE=0 */
|
||||
sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
|
||||
sci_out(port, SCSMR, 0);
|
||||
|
||||
/* Set baud rate */
|
||||
sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
|
||||
(32 * baud) - 1);
|
||||
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
|
||||
|
||||
sci_out(port, SCSPTR, 0);
|
||||
sci_out(port, SCxSR, 0x60);
|
||||
sci_out(port, SCLSR, 0);
|
||||
|
||||
sci_out(port, SCFCR, 0);
|
||||
sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */
|
||||
}
|
||||
#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
|
||||
#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
|
||||
#endif /* CONFIG_EARLY_SCIF_CONSOLE */
|
||||
|
||||
/*
|
||||
* Setup a default console, if more than one is compiled in, rely on the
|
||||
* earlyprintk= parsing to give priority.
|
||||
*/
|
||||
static struct console *early_console;
|
||||
|
||||
static int __init setup_early_printk(char *buf)
|
||||
|
|
@ -203,21 +69,8 @@ static int __init setup_early_printk(char *buf)
|
|||
if (strstr(buf, "keep"))
|
||||
keep_early = 1;
|
||||
|
||||
#ifdef CONFIG_SH_STANDARD_BIOS
|
||||
if (!strncmp(buf, "bios", 4))
|
||||
early_console = &bios_console;
|
||||
#endif
|
||||
#if defined(CONFIG_EARLY_SCIF_CONSOLE)
|
||||
if (!strncmp(buf, "serial", 6)) {
|
||||
early_console = &scif_console;
|
||||
|
||||
#if !defined(CONFIG_SH_STANDARD_BIOS)
|
||||
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
|
||||
scif_sercon_init(buf + 6);
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
if (likely(early_console)) {
|
||||
if (keep_early)
|
||||
|
|
|
|||
Loading…
Reference in a new issue