mirror of
https://github.com/adulau/aha.git
synced 2024-12-27 19:26:25 +00:00
can: Documentation for the CAN device driver interface
This patch documents the CAN netowrk device drivers interface, removes obsolete documentation and adds some useful links to CAN resources. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Wolfgang Grandegger
David S. Miller
parent
a6286ee630
commit
e20dad964a
1 changed files with 194 additions and 35 deletions
|
|
@ -36,10 +36,15 @@ This file contains
|
|||
6.2 local loopback of sent frames
|
||||
6.3 CAN controller hardware filters
|
||||
6.4 The virtual CAN driver (vcan)
|
||||
6.5 currently supported CAN hardware
|
||||
6.6 todo
|
||||
6.5 The CAN network device driver interface
|
||||
6.5.1 Netlink interface to set/get devices properties
|
||||
6.5.2 Setting the CAN bit-timing
|
||||
6.5.3 Starting and stopping the CAN network device
|
||||
6.6 supported CAN hardware
|
||||
|
||||
7 Credits
|
||||
7 Socket CAN resources
|
||||
|
||||
8 Credits
|
||||
|
||||
============================================================================
|
||||
|
||||
|
|
@ -234,6 +239,8 @@ solution for a couple of reasons:
|
|||
the user application using the common CAN filter mechanisms. Inside
|
||||
this filter definition the (interested) type of errors may be
|
||||
selected. The reception of error frames is disabled by default.
|
||||
The format of the CAN error frame is briefly decribed in the Linux
|
||||
header file "include/linux/can/error.h".
|
||||
|
||||
4. How to use Socket CAN
|
||||
------------------------
|
||||
|
|
@ -605,61 +612,213 @@ solution for a couple of reasons:
|
|||
removal of vcan network devices can be managed with the ip(8) tool:
|
||||
|
||||
- Create a virtual CAN network interface:
|
||||
ip link add type vcan
|
||||
$ ip link add type vcan
|
||||
|
||||
- Create a virtual CAN network interface with a specific name 'vcan42':
|
||||
ip link add dev vcan42 type vcan
|
||||
$ ip link add dev vcan42 type vcan
|
||||
|
||||
- Remove a (virtual CAN) network interface 'vcan42':
|
||||
ip link del vcan42
|
||||
$ ip link del vcan42
|
||||
|
||||
The tool 'vcan' from the SocketCAN SVN repository on BerliOS is obsolete.
|
||||
6.5 The CAN network device driver interface
|
||||
|
||||
Virtual CAN network device creation in older Kernels:
|
||||
In Linux Kernel versions < 2.6.24 the vcan driver creates 4 vcan
|
||||
netdevices at module load time by default. This value can be changed
|
||||
with the module parameter 'numdev'. E.g. 'modprobe vcan numdev=8'
|
||||
The CAN network device driver interface provides a generic interface
|
||||
to setup, configure and monitor CAN network devices. The user can then
|
||||
configure the CAN device, like setting the bit-timing parameters, via
|
||||
the netlink interface using the program "ip" from the "IPROUTE2"
|
||||
utility suite. The following chapter describes briefly how to use it.
|
||||
Furthermore, the interface uses a common data structure and exports a
|
||||
set of common functions, which all real CAN network device drivers
|
||||
should use. Please have a look to the SJA1000 or MSCAN driver to
|
||||
understand how to use them. The name of the module is can-dev.ko.
|
||||
|
||||
6.5 currently supported CAN hardware
|
||||
6.5.1 Netlink interface to set/get devices properties
|
||||
|
||||
On the project website http://developer.berlios.de/projects/socketcan
|
||||
there are different drivers available:
|
||||
The CAN device must be configured via netlink interface. The supported
|
||||
netlink message types are defined and briefly described in
|
||||
"include/linux/can/netlink.h". CAN link support for the program "ip"
|
||||
of the IPROUTE2 utility suite is avaiable and it can be used as shown
|
||||
below:
|
||||
|
||||
vcan: Virtual CAN interface driver (if no real hardware is available)
|
||||
sja1000: Philips SJA1000 CAN controller (recommended)
|
||||
i82527: Intel i82527 CAN controller
|
||||
mscan: Motorola/Freescale CAN controller (e.g. inside SOC MPC5200)
|
||||
ccan: CCAN controller core (e.g. inside SOC h7202)
|
||||
slcan: For a bunch of CAN adaptors that are attached via a
|
||||
serial line ASCII protocol (for serial / USB adaptors)
|
||||
- Setting CAN device properties:
|
||||
|
||||
Additionally the different CAN adaptors (ISA/PCI/PCMCIA/USB/Parport)
|
||||
from PEAK Systemtechnik support the CAN netdevice driver model
|
||||
since Linux driver v6.0: http://www.peak-system.com/linux/index.htm
|
||||
$ ip link set can0 type can help
|
||||
Usage: ip link set DEVICE type can
|
||||
[ bitrate BITRATE [ sample-point SAMPLE-POINT] ] |
|
||||
[ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1
|
||||
phase-seg2 PHASE-SEG2 [ sjw SJW ] ]
|
||||
|
||||
Please check the Mailing Lists on the berlios OSS project website.
|
||||
[ loopback { on | off } ]
|
||||
[ listen-only { on | off } ]
|
||||
[ triple-sampling { on | off } ]
|
||||
|
||||
6.6 todo
|
||||
[ restart-ms TIME-MS ]
|
||||
[ restart ]
|
||||
|
||||
The configuration interface for CAN network drivers is still an open
|
||||
issue that has not been finalized in the socketcan project. Also the
|
||||
idea of having a library module (candev.ko) that holds functions
|
||||
that are needed by all CAN netdevices is not ready to ship.
|
||||
Your contribution is welcome.
|
||||
Where: BITRATE := { 1..1000000 }
|
||||
SAMPLE-POINT := { 0.000..0.999 }
|
||||
TQ := { NUMBER }
|
||||
PROP-SEG := { 1..8 }
|
||||
PHASE-SEG1 := { 1..8 }
|
||||
PHASE-SEG2 := { 1..8 }
|
||||
SJW := { 1..4 }
|
||||
RESTART-MS := { 0 | NUMBER }
|
||||
|
||||
7. Credits
|
||||
- Display CAN device details and statistics:
|
||||
|
||||
$ ip -details -statistics link show can0
|
||||
2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UP qlen 10
|
||||
link/can
|
||||
can <TRIPLE-SAMPLING> state ERROR-ACTIVE restart-ms 100
|
||||
bitrate 125000 sample_point 0.875
|
||||
tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
|
||||
sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
|
||||
clock 8000000
|
||||
re-started bus-errors arbit-lost error-warn error-pass bus-off
|
||||
41 17457 0 41 42 41
|
||||
RX: bytes packets errors dropped overrun mcast
|
||||
140859 17608 17457 0 0 0
|
||||
TX: bytes packets errors dropped carrier collsns
|
||||
861 112 0 41 0 0
|
||||
|
||||
More info to the above output:
|
||||
|
||||
"<TRIPLE-SAMPLING>"
|
||||
Shows the list of selected CAN controller modes: LOOPBACK,
|
||||
LISTEN-ONLY, or TRIPLE-SAMPLING.
|
||||
|
||||
"state ERROR-ACTIVE"
|
||||
The current state of the CAN controller: "ERROR-ACTIVE",
|
||||
"ERROR-WARNING", "ERROR-PASSIVE", "BUS-OFF" or "STOPPED"
|
||||
|
||||
"restart-ms 100"
|
||||
Automatic restart delay time. If set to a non-zero value, a
|
||||
restart of the CAN controller will be triggered automatically
|
||||
in case of a bus-off condition after the specified delay time
|
||||
in milliseconds. By default it's off.
|
||||
|
||||
"bitrate 125000 sample_point 0.875"
|
||||
Shows the real bit-rate in bits/sec and the sample-point in the
|
||||
range 0.000..0.999. If the calculation of bit-timing parameters
|
||||
is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the
|
||||
bit-timing can be defined by setting the "bitrate" argument.
|
||||
Optionally the "sample-point" can be specified. By default it's
|
||||
0.000 assuming CIA-recommended sample-points.
|
||||
|
||||
"tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1"
|
||||
Shows the time quanta in ns, propagation segment, phase buffer
|
||||
segment 1 and 2 and the synchronisation jump width in units of
|
||||
tq. They allow to define the CAN bit-timing in a hardware
|
||||
independent format as proposed by the Bosch CAN 2.0 spec (see
|
||||
chapter 8 of http://www.semiconductors.bosch.de/pdf/can2spec.pdf).
|
||||
|
||||
"sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
|
||||
clock 8000000"
|
||||
Shows the bit-timing constants of the CAN controller, here the
|
||||
"sja1000". The minimum and maximum values of the time segment 1
|
||||
and 2, the synchronisation jump width in units of tq, the
|
||||
bitrate pre-scaler and the CAN system clock frequency in Hz.
|
||||
These constants could be used for user-defined (non-standard)
|
||||
bit-timing calculation algorithms in user-space.
|
||||
|
||||
"re-started bus-errors arbit-lost error-warn error-pass bus-off"
|
||||
Shows the number of restarts, bus and arbitration lost errors,
|
||||
and the state changes to the error-warning, error-passive and
|
||||
bus-off state. RX overrun errors are listed in the "overrun"
|
||||
field of the standard network statistics.
|
||||
|
||||
6.5.2 Setting the CAN bit-timing
|
||||
|
||||
The CAN bit-timing parameters can always be defined in a hardware
|
||||
independent format as proposed in the Bosch CAN 2.0 specification
|
||||
specifying the arguments "tq", "prop_seg", "phase_seg1", "phase_seg2"
|
||||
and "sjw":
|
||||
|
||||
$ ip link set canX type can tq 125 prop-seg 6 \
|
||||
phase-seg1 7 phase-seg2 2 sjw 1
|
||||
|
||||
If the kernel option CONFIG_CAN_CALC_BITTIMING is enabled, CIA
|
||||
recommended CAN bit-timing parameters will be calculated if the bit-
|
||||
rate is specified with the argument "bitrate":
|
||||
|
||||
$ ip link set canX type can bitrate 125000
|
||||
|
||||
Note that this works fine for the most common CAN controllers with
|
||||
standard bit-rates but may *fail* for exotic bit-rates or CAN system
|
||||
clock frequencies. Disabling CONFIG_CAN_CALC_BITTIMING saves some
|
||||
space and allows user-space tools to solely determine and set the
|
||||
bit-timing parameters. The CAN controller specific bit-timing
|
||||
constants can be used for that purpose. They are listed by the
|
||||
following command:
|
||||
|
||||
$ ip -details link show can0
|
||||
...
|
||||
sja1000: clock 8000000 tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
|
||||
|
||||
6.5.3 Starting and stopping the CAN network device
|
||||
|
||||
A CAN network device is started or stopped as usual with the command
|
||||
"ifconfig canX up/down" or "ip link set canX up/down". Be aware that
|
||||
you *must* define proper bit-timing parameters for real CAN devices
|
||||
before you can start it to avoid error-prone default settings:
|
||||
|
||||
$ ip link set canX up type can bitrate 125000
|
||||
|
||||
A device may enter the "bus-off" state if too much errors occurred on
|
||||
the CAN bus. Then no more messages are received or sent. An automatic
|
||||
bus-off recovery can be enabled by setting the "restart-ms" to a
|
||||
non-zero value, e.g.:
|
||||
|
||||
$ ip link set canX type can restart-ms 100
|
||||
|
||||
Alternatively, the application may realize the "bus-off" condition
|
||||
by monitoring CAN error frames and do a restart when appropriate with
|
||||
the command:
|
||||
|
||||
$ ip link set canX type can restart
|
||||
|
||||
Note that a restart will also create a CAN error frame (see also
|
||||
chapter 3.4).
|
||||
|
||||
6.6 Supported CAN hardware
|
||||
|
||||
Please check the "Kconfig" file in "drivers/net/can" to get an actual
|
||||
list of the support CAN hardware. On the Socket CAN project website
|
||||
(see chapter 7) there might be further drivers available, also for
|
||||
older kernel versions.
|
||||
|
||||
7. Socket CAN resources
|
||||
-----------------------
|
||||
|
||||
You can find further resources for Socket CAN like user space tools,
|
||||
support for old kernel versions, more drivers, mailing lists, etc.
|
||||
at the BerliOS OSS project website for Socket CAN:
|
||||
|
||||
http://developer.berlios.de/projects/socketcan
|
||||
|
||||
If you have questions, bug fixes, etc., don't hesitate to post them to
|
||||
the Socketcan-Users mailing list. But please search the archives first.
|
||||
|
||||
8. Credits
|
||||
----------
|
||||
|
||||
Oliver Hartkopp (PF_CAN core, filters, drivers, bcm)
|
||||
Oliver Hartkopp (PF_CAN core, filters, drivers, bcm, SJA1000 driver)
|
||||
Urs Thuermann (PF_CAN core, kernel integration, socket interfaces, raw, vcan)
|
||||
Jan Kizka (RT-SocketCAN core, Socket-API reconciliation)
|
||||
Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews)
|
||||
Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews,
|
||||
CAN device driver interface, MSCAN driver)
|
||||
Robert Schwebel (design reviews, PTXdist integration)
|
||||
Marc Kleine-Budde (design reviews, Kernel 2.6 cleanups, drivers)
|
||||
Benedikt Spranger (reviews)
|
||||
Thomas Gleixner (LKML reviews, coding style, posting hints)
|
||||
Andrey Volkov (kernel subtree structure, ioctls, mscan driver)
|
||||
Andrey Volkov (kernel subtree structure, ioctls, MSCAN driver)
|
||||
Matthias Brukner (first SJA1000 CAN netdevice implementation Q2/2003)
|
||||
Klaus Hitschler (PEAK driver integration)
|
||||
Uwe Koppe (CAN netdevices with PF_PACKET approach)
|
||||
Michael Schulze (driver layer loopback requirement, RT CAN drivers review)
|
||||
Pavel Pisa (Bit-timing calculation)
|
||||
Sascha Hauer (SJA1000 platform driver)
|
||||
Sebastian Haas (SJA1000 EMS PCI driver)
|
||||
Markus Plessing (SJA1000 EMS PCI driver)
|
||||
Per Dalen (SJA1000 Kvaser PCI driver)
|
||||
Sam Ravnborg (reviews, coding style, kbuild help)
|
||||
|
|
|
|||
Loading…
Reference in a new issue