From f93611fac7eed3aa175795fb8e452aa30af33b6a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 8 Dec 2009 01:54:35 +0300 Subject: [PATCH 01/36] powerpc/fsl_pci: Fix P2P bridge handling for MPC83xx PCIe controllers It appears that we wrongly calculate dev_base for type1 config cycles. The thing is: we shouldn't subtract hose->first_busno because PCI core sets PCI primary, secondary and subordinate bus numbers, and PCIe controller actually takes the registers into account. So we should use just bus->number. Also, according to MPC8315 reference manual, primary bus number should always remain 0. We have PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS quirk in indirect_pci.c, but since 83xx is somewhat special, it doesn't use indirect_pci.c routines, so we have to implement the quirk specifically for 83xx PCIe controllers. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4e3a3e345ab..e1a028c1f18 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -464,8 +464,7 @@ static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, { struct pci_controller *hose = pci_bus_to_host(bus); struct mpc83xx_pcie_priv *pcie = hose->dn->data; - u8 bus_no = bus->number - hose->first_busno; - u32 dev_base = bus_no << 24 | devfn << 16; + u32 dev_base = bus->number << 24 | devfn << 16; int ret; ret = mpc83xx_pcie_exclude_device(bus, devfn); @@ -515,12 +514,17 @@ static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { + struct pci_controller *hose = pci_bus_to_host(bus); void __iomem *cfg_addr; cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); if (!cfg_addr) return PCIBIOS_DEVICE_NOT_FOUND; + /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */ + if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno) + val &= 0xffffff00; + switch (len) { case 1: out_8(cfg_addr, val); From 196f0082d8e77f647edd21ea27b5a9bba8116396 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 6 Dec 2009 12:32:47 +0100 Subject: [PATCH 02/36] powerpc/fsl: try to explain why the interrupt numbers are off by 16 Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Kumar Gala --- .../powerpc/dts-bindings/fsl/mpic.txt | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/powerpc/dts-bindings/fsl/mpic.txt diff --git a/Documentation/powerpc/dts-bindings/fsl/mpic.txt b/Documentation/powerpc/dts-bindings/fsl/mpic.txt new file mode 100644 index 00000000000..71e39cf3215 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/mpic.txt @@ -0,0 +1,42 @@ +* OpenPIC and its interrupt numbers on Freescale's e500/e600 cores + +The OpenPIC specification does not specify which interrupt source has to +become which interrupt number. This is up to the software implementation +of the interrupt controller. The only requirement is that every +interrupt source has to have an unique interrupt number / vector number. +To accomplish this the current implementation assigns the number zero to +the first source, the number one to the second source and so on until +all interrupt sources have their unique number. +Usually the assigned vector number equals the interrupt number mentioned +in the documentation for a given core / CPU. This is however not true +for the e500 cores (MPC85XX CPUs) where the documentation distinguishes +between internal and external interrupt sources and starts counting at +zero for both of them. + +So what to write for external interrupt source X or internal interrupt +source Y into the device tree? Here is an example: + +The memory map for the interrupt controller in the MPC8544[0] shows, +that the first interrupt source starts at 0x5_0000 (PIC Register Address +Map-Interrupt Source Configuration Registers). This source becomes the +number zero therefore: + External interrupt 0 = interrupt number 0 + External interrupt 1 = interrupt number 1 + External interrupt 2 = interrupt number 2 + ... +Every interrupt number allocates 0x20 bytes register space. So to get +its number it is sufficient to shift the lower 16bits to right by five. +So for the external interrupt 10 we have: + 0x0140 >> 5 = 10 + +After the external sources, the internal sources follow. The in core I2C +controller on the MPC8544 for instance has the internal source number +27. Oo obtain its interrupt number we take the lower 16bits of its memory +address (0x5_0560) and shift it right: + 0x0560 >> 5 = 43 + +Therefore the I2C device node for the MPC8544 CPU has to have the +interrupt number 43 specified in the device tree. + +[0] MPC8544E PowerQUICCTM III, Integrated Host Processor Family Reference Manual + MPC8544ERM Rev. 1 10/2007 From 9174e4989ecf53eca69767229deb9ad85efd55fe Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 16:58:51 +0300 Subject: [PATCH 03/36] powerpc/83xx: mpc8349emitx - add gpio controller declarations mpc8349 bears two GPIO controllers. Enable support for them. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index feeeb7f9d60..16872c9a79b 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -63,6 +63,24 @@ reg = <0x200 0x100>; }; + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; From 3320cf844f3183870e66059174ce73f9662e523b Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 16:58:52 +0300 Subject: [PATCH 04/36] powerpc/83xx: mpc8349emitx - populate I2C busses in device tree Add OF descriptions of EEPROM, two GPIO extenders and SPD hanging on I2C on this board. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 16872c9a79b..0fb78b20ef9 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -90,6 +90,12 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; + + eeprom: at24@50 { + compatible = "st-micro,24c256"; + reg = <0x50>; + }; + }; i2c@3100 { @@ -109,6 +115,25 @@ interrupt-parent = <&ipic>; }; + pcf1: iexp@38 { + #gpio-cells = <2>; + compatible = "ti,pcf8574a"; + reg = <0x38>; + gpio-controller; + }; + + pcf2: iexp@39 { + #gpio-cells = <2>; + compatible = "ti,pcf8574a"; + reg = <0x39>; + gpio-controller; + }; + + spd: at24@51 { + compatible = "at24,spd"; + reg = <0x51>; + }; + mcu_pio: mcu@a { #gpio-cells = <2>; compatible = "fsl,mc9s08qg8-mpc8349emitx", From 1d88fd11a2484b1bc0a36010781dc410446bef29 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 23:51:20 +0300 Subject: [PATCH 05/36] powerpc/83xx: mpc8349emitx - add OF descriptions of LocalBus devices Describe all LocalBus chipselects on MPC8349E-MITX board. Also add flash bindings. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 0fb78b20ef9..346d1ba85ed 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -374,7 +374,26 @@ compatible = "fsl,mpc8349e-localbus", "fsl,pq2pro-localbus"; reg = <0xe0005000 0xd8>; - ranges = <0x3 0x0 0xf0000000 0x210>; + ranges = <0x0 0x0 0xfe000000 0x1000000 /* flash */ + 0x1 0x0 0xf8000000 0x20000 /* VSC 7385 */ + 0x2 0x0 0xf9000000 0x200000 /* exp slot */ + 0x3 0x0 0xf0000000 0x210>; /* CF slot */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + flash@0,800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x800000 0x800000>; + bank-width = <2>; + device-width = <1>; + }; pata@3,0 { compatible = "fsl,mpc8349emitx-pata", "ata-generic"; From b387dfe902c352d5be4690a135412ece4868b531 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 16:58:54 +0300 Subject: [PATCH 06/36] powerpc/83xx: mpc8349emitx - add leds-gpio binding Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 346d1ba85ed..b53d1df11e2 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -318,6 +318,24 @@ reg = <0x700 0x100>; device_type = "ipic"; }; + + gpio-leds { + compatible = "gpio-leds"; + + green { + label = "Green"; + gpios = <&pcf1 0 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&pcf1 1 1>; + /* linux,default-trigger = "heartbeat"; */ + default-state = "on"; + }; + }; + }; pci0: pci@e0008500 { From b22b97c15eed893a6768aad2f596706c56bf194e Mon Sep 17 00:00:00 2001 From: Mark Ware Date: Thu, 10 Dec 2009 22:14:34 +1100 Subject: [PATCH 07/36] powerpc/cpm2_pic: Allow correct flow_types for port C interrupts Port C interrupts can be either falling edge, or either edge. Other external interrupts are either falling edge or active low. Tested on a custom 8280 based board. Signed-off-by: Mark Ware Acked-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm2_pic.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index 971483f0dfa..1709ac5aac7 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -143,13 +143,23 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) struct irq_desc *desc = irq_to_desc(virq); unsigned int vold, vnew, edibit; - if (flow_type == IRQ_TYPE_NONE) - flow_type = IRQ_TYPE_LEVEL_LOW; + /* Port C interrupts are either IRQ_TYPE_EDGE_FALLING or + * IRQ_TYPE_EDGE_BOTH (default). All others are IRQ_TYPE_EDGE_FALLING + * or IRQ_TYPE_LEVEL_LOW (default) + */ + if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) { + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_EDGE_BOTH; - if (flow_type & IRQ_TYPE_EDGE_RISING) { - printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n", - flow_type); - return -EINVAL; + if (flow_type != IRQ_TYPE_EDGE_BOTH && + flow_type != IRQ_TYPE_EDGE_FALLING) + goto err_sense; + } else { + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) + goto err_sense; } desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); @@ -181,6 +191,10 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) if (vold != vnew) out_be32(&cpm2_intctl->ic_siexr, vnew); return 0; + +err_sense: + pr_err("CPM2 PIC: sense type 0x%x not supported\n", flow_type); + return -EINVAL; } static struct irq_chip cpm2_pic = { From f25c525c1412675d2b23d5d88660fb5c9f3a5341 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 10 Dec 2009 21:00:53 +0300 Subject: [PATCH 08/36] powerpc/83xx/suspend: Clear deep_sleeping after devices resume Currently 83xx PMC driver clears deep_sleeping variable very early, before devices are resumed. This makes fsl_deep_sleep() unusable in drivers' resume() callback. Sure, drivers can store fsl_deep_sleep() value on suspend and use the stored value on resume. But a better solution is to postpone clearing the deep_sleeping variable, i.e. move it into finish() callback. Signed-off-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/suspend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index d306f07b9aa..b0c261936f3 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -194,7 +194,7 @@ out: return ret; } -static void mpc83xx_suspend_finish(void) +static void mpc83xx_suspend_end(void) { deep_sleeping = 0; } @@ -278,7 +278,7 @@ static struct platform_suspend_ops mpc83xx_suspend_ops = { .valid = mpc83xx_suspend_valid, .begin = mpc83xx_suspend_begin, .enter = mpc83xx_suspend_enter, - .finish = mpc83xx_suspend_finish, + .end = mpc83xx_suspend_end, }; static int pmc_probe(struct of_device *ofdev, From 87faaabb09d0802d54ff863a16ca821d7c669cb6 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 10 Dec 2009 21:00:56 +0300 Subject: [PATCH 09/36] powerpc/83xx/suspend: Save and restore SICRL, SICRH and SCCR We need to save SICRL, SICRH and SCCR registers on suspend, and restore them on resume. Otherwise, we lose IO and clocks setup on MPC8315E-RDB boards when ULPI USB PHY is used (non-POR setup). Signed-off-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/suspend.c | 48 +++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index b0c261936f3..43805348b81 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -32,6 +32,7 @@ #define PMCCR1_NEXT_STATE 0x0C /* Next state for power management */ #define PMCCR1_NEXT_STATE_SHIFT 2 #define PMCCR1_CURR_STATE 0x03 /* Current state for power management*/ +#define IMMR_SYSCR_OFFSET 0x100 #define IMMR_RCW_OFFSET 0x900 #define RCW_PCI_HOST 0x80000000 @@ -78,6 +79,22 @@ struct mpc83xx_clock { u32 sccr; }; +struct mpc83xx_syscr { + __be32 sgprl; + __be32 sgprh; + __be32 spridr; + __be32 :32; + __be32 spcr; + __be32 sicrl; + __be32 sicrh; +}; + +struct mpc83xx_saved { + u32 sicrl; + u32 sicrh; + u32 sccr; +}; + struct pmc_type { int has_deep_sleep; }; @@ -87,6 +104,8 @@ static int has_deep_sleep, deep_sleeping; static int pmc_irq; static struct mpc83xx_pmc __iomem *pmc_regs; static struct mpc83xx_clock __iomem *clock_regs; +static struct mpc83xx_syscr __iomem *syscr_regs; +static struct mpc83xx_saved saved_regs; static int is_pci_agent, wake_from_pci; static phys_addr_t immrbase; static int pci_pm_state; @@ -137,6 +156,20 @@ static irqreturn_t pmc_irq_handler(int irq, void *dev_id) return ret; } +static void mpc83xx_suspend_restore_regs(void) +{ + out_be32(&syscr_regs->sicrl, saved_regs.sicrl); + out_be32(&syscr_regs->sicrh, saved_regs.sicrh); + out_be32(&clock_regs->sccr, saved_regs.sccr); +} + +static void mpc83xx_suspend_save_regs(void) +{ + saved_regs.sicrl = in_be32(&syscr_regs->sicrl); + saved_regs.sicrh = in_be32(&syscr_regs->sicrh); + saved_regs.sccr = in_be32(&clock_regs->sccr); +} + static int mpc83xx_suspend_enter(suspend_state_t state) { int ret = -EAGAIN; @@ -166,6 +199,8 @@ static int mpc83xx_suspend_enter(suspend_state_t state) */ if (deep_sleeping) { + mpc83xx_suspend_save_regs(); + out_be32(&pmc_regs->mask, PMCER_ALL); out_be32(&pmc_regs->config1, @@ -179,6 +214,8 @@ static int mpc83xx_suspend_enter(suspend_state_t state) in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF); out_be32(&pmc_regs->mask, PMCER_PMCI); + + mpc83xx_suspend_restore_regs(); } else { out_be32(&pmc_regs->mask, PMCER_PMCI); @@ -333,12 +370,23 @@ static int pmc_probe(struct of_device *ofdev, goto out_pmc; } + if (has_deep_sleep) { + syscr_regs = ioremap(immrbase + IMMR_SYSCR_OFFSET, + sizeof(*syscr_regs)); + if (!syscr_regs) { + ret = -ENOMEM; + goto out_syscr; + } + } + if (is_pci_agent) mpc83xx_set_agent(); suspend_set_ops(&mpc83xx_suspend_ops); return 0; +out_syscr: + iounmap(clock_regs); out_pmc: iounmap(pmc_regs); out: From 1cad2c874162d84bf7b2d31344a08b9cb724d138 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 10 Dec 2009 21:01:03 +0300 Subject: [PATCH 10/36] powerpc/83xx: Add power management support for MPC8315E-RDB boards - Add nodes for PMC and GTM controllers. GTM4 can be used as a wakeup source; - Add fsl,magic-packet properties to eTSEC nodes, i.e. wake-on-lan support. Unlike MPC8313 processors, MPC8315 can resume from deep sleep upon magic packet reception. Signed-off-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8315erdb.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 32e10f588c1..8a3a4f3ef83 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -204,6 +204,7 @@ interrupt-parent = <&ipic>; tbi-handle = <&tbi0>; phy-handle = < &phy0 >; + fsl,magic-packet; mdio@520 { #address-cells = <1>; @@ -246,6 +247,7 @@ interrupt-parent = <&ipic>; tbi-handle = <&tbi1>; phy-handle = < &phy1 >; + fsl,magic-packet; mdio@520 { #address-cells = <1>; @@ -309,6 +311,22 @@ interrupt-parent = <&ipic>; }; + gtm1: timer@500 { + compatible = "fsl,mpc8315-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + timer@600 { + compatible = "fsl,mpc8315-gtm", "fsl,gtm"; + reg = <0x600 0x100>; + interrupts = <91 8 79 8 85 8 73 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + /* IPIC * interrupts cell = * sense values match linux IORESOURCE_IRQ_* defines: @@ -337,6 +355,15 @@ 0x59 0x8>; interrupt-parent = < &ipic >; }; + + pmc: power@b00 { + compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc", + "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 8>; + interrupt-parent = <&ipic>; + fsl,mpc8313-wakeup-timer = <>m1>; + }; }; pci0: pci@e0008500 { From 78331aded913d76c7ff996a1a0747d54b057460b Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 1 Dec 2009 21:48:13 +0100 Subject: [PATCH 11/36] powerpc/gpio: support gpio_to_irq() gpiolib returns -ENXIO if struct gpio_chip::to_irq isn't set, so it's safe to always call. Signed-off-by: Peter Korsgaard Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/gpio.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h index ea04632399d..38762edb5e5 100644 --- a/arch/powerpc/include/asm/gpio.h +++ b/arch/powerpc/include/asm/gpio.h @@ -38,12 +38,9 @@ static inline int gpio_cansleep(unsigned int gpio) return __gpio_cansleep(gpio); } -/* - * Not implemented, yet. - */ static inline int gpio_to_irq(unsigned int gpio) { - return -ENOSYS; + return __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned int irq) From c1a676dfa2fa25fb9ec77c92ebe3ff580648b6ac Mon Sep 17 00:00:00 2001 From: Felix Radensky Date: Wed, 12 Aug 2009 08:57:39 +0300 Subject: [PATCH 12/36] powerpc/85xx: Workaround MPC8572/MPC8536 GPIO 1 errata. On MPC8572 and MPC8536 the status of GPIO pins configured as output cannot be determined by reading GPDAT register. Workaround by reading the status of input pins from GPDAT and the status of output pins from a shadow register. Signed-off-by: Felix Radensky Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/mpc8xxx_gpio.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c index 103eace3619..ee1c0e1cf4a 100644 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -54,6 +54,22 @@ static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm) mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT); } +/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs + * defined as output cannot be determined by reading GPDAT register, + * so we use shadow data register instead. The status of input pins + * is determined by reading GPDAT register. + */ +static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + u32 val; + struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); + struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm); + + val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR); + + return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio); +} + static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); @@ -136,7 +152,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np) gc->ngpio = MPC8XXX_GPIO_PINS; gc->direction_input = mpc8xxx_gpio_dir_in; gc->direction_output = mpc8xxx_gpio_dir_out; - gc->get = mpc8xxx_gpio_get; + if (of_device_is_compatible(np, "fsl,mpc8572-gpio")) + gc->get = mpc8572_gpio_get; + else + gc->get = mpc8xxx_gpio_get; gc->set = mpc8xxx_gpio_set; ret = of_mm_gpiochip_add(np, mm_gc); From 070bae1fb03bbf6a19a18722464a984eb3ddf55e Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 11 Dec 2009 03:39:53 +0000 Subject: [PATCH 13/36] powerpc/44x: Extend Katmai dts for ADMA and RAID56 support Add nodes for PPC440SPe DMA, I2O, XOR engines and Memory Queue module which are used in the updated PPC440SPe ADMA driver. Also extend plb ranges property to specify address ranges for DMA0/1 and I2O engines. Signed-off-by: Yuri Tikhonov Signed-off-by: Anatolij Gustschin Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/katmai.dts | 52 +++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 51eb6ed5da2..8f345de960c 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -108,12 +108,19 @@ dcr-reg = <0x00c 0x002>; }; + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + plb { compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; #address-cells = <2>; #size-cells = <1>; /* addr-child addr-parent size */ - ranges = <0x4 0xe0000000 0x4 0xe0000000 0x20000000 + ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000 + 0x4 0x00200000 0x4 0x00200000 0x00000400 + 0x4 0xe0000000 0x4 0xe0000000 0x20000000 0xc 0x00000000 0xc 0x00000000 0x20000000 0xd 0x00000000 0xd 0x00000000 0x80000000 0xd 0x80000000 0xd 0x80000000 0x80000000 @@ -400,6 +407,49 @@ 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + DMA1: dma1@400100200 { + compatible = "ibm,dma-440spe"; + cell-index = <1>; + reg = <0x00000004 0x00100200 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x16 4 + 1 &UIC1 0x16 4>; + }; + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; }; chosen { From a18cb387e5c29be5c95cded5b5a55110bb930f5c Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Tue, 8 Dec 2009 19:04:37 +0000 Subject: [PATCH 14/36] powerpc/44x: Increase warp SD buffer Newer revs of the FPGA have a larger SD buffer. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/warp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index 31605ee4afb..e576ee85c42 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -146,7 +146,7 @@ fpga@2,4000 { compatible = "pika,fpga-sd"; - reg = <0x00000002 0x00004000 0x00000A00>; + reg = <0x00000002 0x00004000 0x00004000>; }; nor@0,0 { From 925cc71e512a29e2594bcc17dc58d0a0e9c4d524 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 17 Dec 2009 14:44:38 +0000 Subject: [PATCH 15/36] mm: Add notifier in pageblock isolation for balloon drivers Memory balloon drivers can allocate a large amount of memory which is not movable but could be freed to accomodate memory hotplug remove. Prior to calling the memory hotplug notifier chain the memory in the pageblock is isolated. Currently, if the migrate type is not MIGRATE_MOVABLE the isolation will not proceed, causing the memory removal for that page range to fail. Rather than failing pageblock isolation if the migrateteype is not MIGRATE_MOVABLE, this patch checks if all of the pages in the pageblock, and not on the LRU, are owned by a registered balloon driver (or other entity) using a notifier chain. If all of the non-movable pages are owned by a balloon, they can be freed later through the memory notifier chain and the range can still be isolated in set_migratetype_isolate(). Signed-off-by: Robert Jennings Cc: Mel Gorman Cc: Ingo Molnar Cc: Brian King Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Gerald Schaefer Cc: KAMEZAWA Hiroyuki Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- drivers/base/memory.c | 19 +++++++++++++ include/linux/memory.h | 27 +++++++++++++++++++ mm/page_alloc.c | 61 +++++++++++++++++++++++++++++++++++------- 3 files changed, 98 insertions(+), 9 deletions(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index c4c8f2e1dd1..d7d77d4a402 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -63,6 +63,20 @@ void unregister_memory_notifier(struct notifier_block *nb) } EXPORT_SYMBOL(unregister_memory_notifier); +static ATOMIC_NOTIFIER_HEAD(memory_isolate_chain); + +int register_memory_isolate_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&memory_isolate_chain, nb); +} +EXPORT_SYMBOL(register_memory_isolate_notifier); + +void unregister_memory_isolate_notifier(struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&memory_isolate_chain, nb); +} +EXPORT_SYMBOL(unregister_memory_isolate_notifier); + /* * register_memory - Setup a sysfs device for a memory block */ @@ -157,6 +171,11 @@ int memory_notify(unsigned long val, void *v) return blocking_notifier_call_chain(&memory_chain, val, v); } +int memory_isolate_notify(unsigned long val, void *v) +{ + return atomic_notifier_call_chain(&memory_isolate_chain, val, v); +} + /* * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is * OK to have direct references to sparsemem variables in here. diff --git a/include/linux/memory.h b/include/linux/memory.h index 37fa19b34ef..1adfe779eb9 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -50,6 +50,19 @@ struct memory_notify { int status_change_nid; }; +/* + * During pageblock isolation, count the number of pages within the + * range [start_pfn, start_pfn + nr_pages) which are owned by code + * in the notifier chain. + */ +#define MEM_ISOLATE_COUNT (1<<0) + +struct memory_isolate_notify { + unsigned long start_pfn; /* Start of range to check */ + unsigned int nr_pages; /* # pages in range to check */ + unsigned int pages_found; /* # pages owned found by callbacks */ +}; + struct notifier_block; struct mem_section; @@ -76,14 +89,28 @@ static inline int memory_notify(unsigned long val, void *v) { return 0; } +static inline int register_memory_isolate_notifier(struct notifier_block *nb) +{ + return 0; +} +static inline void unregister_memory_isolate_notifier(struct notifier_block *nb) +{ +} +static inline int memory_isolate_notify(unsigned long val, void *v) +{ + return 0; +} #else extern int register_memory_notifier(struct notifier_block *nb); extern void unregister_memory_notifier(struct notifier_block *nb); +extern int register_memory_isolate_notifier(struct notifier_block *nb); +extern void unregister_memory_isolate_notifier(struct notifier_block *nb); extern int register_new_memory(int, struct mem_section *); extern int unregister_memory_section(struct mem_section *); extern int memory_dev_init(void); extern int remove_memory_block(unsigned long, struct mem_section *, int); extern int memory_notify(unsigned long val, void *v); +extern int memory_isolate_notify(unsigned long val, void *v); extern struct memory_block *find_memory_block(struct mem_section *); #define CONFIG_MEM_BLOCK_SIZE (PAGES_PER_SECTION< #include #include +#include #include #include @@ -5008,23 +5009,65 @@ void set_pageblock_flags_group(struct page *page, unsigned long flags, int set_migratetype_isolate(struct page *page) { struct zone *zone; - unsigned long flags; + struct page *curr_page; + unsigned long flags, pfn, iter; + unsigned long immobile = 0; + struct memory_isolate_notify arg; + int notifier_ret; int ret = -EBUSY; int zone_idx; zone = page_zone(page); zone_idx = zone_idx(zone); + spin_lock_irqsave(&zone->lock, flags); - /* - * In future, more migrate types will be able to be isolation target. - */ - if (get_pageblock_migratetype(page) != MIGRATE_MOVABLE && - zone_idx != ZONE_MOVABLE) + if (get_pageblock_migratetype(page) == MIGRATE_MOVABLE || + zone_idx == ZONE_MOVABLE) { + ret = 0; goto out; - set_pageblock_migratetype(page, MIGRATE_ISOLATE); - move_freepages_block(zone, page, MIGRATE_ISOLATE); - ret = 0; + } + + pfn = page_to_pfn(page); + arg.start_pfn = pfn; + arg.nr_pages = pageblock_nr_pages; + arg.pages_found = 0; + + /* + * It may be possible to isolate a pageblock even if the + * migratetype is not MIGRATE_MOVABLE. The memory isolation + * notifier chain is used by balloon drivers to return the + * number of pages in a range that are held by the balloon + * driver to shrink memory. If all the pages are accounted for + * by balloons, are free, or on the LRU, isolation can continue. + * Later, for example, when memory hotplug notifier runs, these + * pages reported as "can be isolated" should be isolated(freed) + * by the balloon driver through the memory notifier chain. + */ + notifier_ret = memory_isolate_notify(MEM_ISOLATE_COUNT, &arg); + notifier_ret = notifier_to_errno(notifier_ret); + if (notifier_ret || !arg.pages_found) + goto out; + + for (iter = pfn; iter < (pfn + pageblock_nr_pages); iter++) { + if (!pfn_valid_within(pfn)) + continue; + + curr_page = pfn_to_page(iter); + if (!page_count(curr_page) || PageLRU(curr_page)) + continue; + + immobile++; + } + + if (arg.pages_found == immobile) + ret = 0; + out: + if (!ret) { + set_pageblock_migratetype(page, MIGRATE_ISOLATE); + move_freepages_block(zone, page, MIGRATE_ISOLATE); + } + spin_unlock_irqrestore(&zone->lock, flags); if (!ret) drain_all_pages(); From 14b8a76b9d53346f2871bf419da2aaf219940c50 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Thu, 17 Dec 2009 14:44:52 +0000 Subject: [PATCH 16/36] powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings Cc: Mel Gorman Cc: Ingo Molnar Cc: Brian King Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Gerald Schaefer Cc: KAMEZAWA Hiroyuki Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/cmm.c | 254 ++++++++++++++++++++++++++- 1 file changed, 248 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index bcdcf0ccc8d..a277f2e28db 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -38,19 +38,28 @@ #include #include #include +#include #include "plpar_wrappers.h" #define CMM_DRIVER_VERSION "1.0.0" #define CMM_DEFAULT_DELAY 1 +#define CMM_HOTPLUG_DELAY 5 #define CMM_DEBUG 0 #define CMM_DISABLE 0 #define CMM_OOM_KB 1024 #define CMM_MIN_MEM_MB 256 #define KB2PAGES(_p) ((_p)>>(PAGE_SHIFT-10)) #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10)) +/* + * The priority level tries to ensure that this notifier is called as + * late as possible to reduce thrashing in the shared memory pool. + */ +#define CMM_MEM_HOTPLUG_PRI 1 +#define CMM_MEM_ISOLATE_PRI 15 static unsigned int delay = CMM_DEFAULT_DELAY; +static unsigned int hotplug_delay = CMM_HOTPLUG_DELAY; static unsigned int oom_kb = CMM_OOM_KB; static unsigned int cmm_debug = CMM_DEBUG; static unsigned int cmm_disabled = CMM_DISABLE; @@ -65,6 +74,10 @@ MODULE_VERSION(CMM_DRIVER_VERSION); module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. " "[Default=" __stringify(CMM_DEFAULT_DELAY) "]"); +module_param_named(hotplug_delay, hotplug_delay, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(delay, "Delay (in seconds) after memory hotplug remove " + "before loaning resumes. " + "[Default=" __stringify(CMM_HOTPLUG_DELAY) "]"); module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. " "[Default=" __stringify(CMM_OOM_KB) "]"); @@ -92,6 +105,9 @@ static unsigned long oom_freed_pages; static struct cmm_page_array *cmm_page_list; static DEFINE_SPINLOCK(cmm_lock); +static DEFINE_MUTEX(hotplug_mutex); +static int hotplug_occurred; /* protected by the hotplug mutex */ + static struct task_struct *cmm_thread_ptr; /** @@ -110,6 +126,17 @@ static long cmm_alloc_pages(long nr) cmm_dbg("Begin request for %ld pages\n", nr); while (nr) { + /* Exit if a hotplug operation is in progress or occurred */ + if (mutex_trylock(&hotplug_mutex)) { + if (hotplug_occurred) { + mutex_unlock(&hotplug_mutex); + break; + } + mutex_unlock(&hotplug_mutex); + } else { + break; + } + addr = __get_free_page(GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC); if (!addr) @@ -119,8 +146,9 @@ static long cmm_alloc_pages(long nr) if (!pa || pa->index >= CMM_NR_PAGES) { /* Need a new page for the page list. */ spin_unlock(&cmm_lock); - npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN | - __GFP_NORETRY | __GFP_NOMEMALLOC); + npa = (struct cmm_page_array *)__get_free_page( + GFP_NOIO | __GFP_NOWARN | + __GFP_NORETRY | __GFP_NOMEMALLOC); if (!npa) { pr_info("%s: Can not allocate new page list\n", __func__); free_page(addr); @@ -282,9 +310,28 @@ static int cmm_thread(void *dummy) while (1) { timeleft = msleep_interruptible(delay * 1000); - if (kthread_should_stop() || timeleft) { - loaned_pages_target = loaned_pages; + if (kthread_should_stop() || timeleft) break; + + if (mutex_trylock(&hotplug_mutex)) { + if (hotplug_occurred) { + hotplug_occurred = 0; + mutex_unlock(&hotplug_mutex); + cmm_dbg("Hotplug operation has occurred, " + "loaning activity suspended " + "for %d seconds.\n", + hotplug_delay); + timeleft = msleep_interruptible(hotplug_delay * + 1000); + if (kthread_should_stop() || timeleft) + break; + continue; + } + mutex_unlock(&hotplug_mutex); + } else { + cmm_dbg("Hotplug operation in progress, activity " + "suspended\n"); + continue; } cmm_get_mpp(); @@ -413,6 +460,193 @@ static struct notifier_block cmm_reboot_nb = { .notifier_call = cmm_reboot_notifier, }; +/** + * cmm_count_pages - Count the number of pages loaned in a particular range. + * + * @arg: memory_isolate_notify structure with address range and count + * + * Return value: + * 0 on success + **/ +static unsigned long cmm_count_pages(void *arg) +{ + struct memory_isolate_notify *marg = arg; + struct cmm_page_array *pa; + unsigned long start = (unsigned long)pfn_to_kaddr(marg->start_pfn); + unsigned long end = start + (marg->nr_pages << PAGE_SHIFT); + unsigned long idx; + + spin_lock(&cmm_lock); + pa = cmm_page_list; + while (pa) { + if ((unsigned long)pa >= start && (unsigned long)pa < end) + marg->pages_found++; + for (idx = 0; idx < pa->index; idx++) + if (pa->page[idx] >= start && pa->page[idx] < end) + marg->pages_found++; + pa = pa->next; + } + spin_unlock(&cmm_lock); + return 0; +} + +/** + * cmm_memory_isolate_cb - Handle memory isolation notifier calls + * @self: notifier block struct + * @action: action to take + * @arg: struct memory_isolate_notify data for handler + * + * Return value: + * NOTIFY_OK or notifier error based on subfunction return value + **/ +static int cmm_memory_isolate_cb(struct notifier_block *self, + unsigned long action, void *arg) +{ + int ret = 0; + + if (action == MEM_ISOLATE_COUNT) + ret = cmm_count_pages(arg); + + if (ret) + ret = notifier_from_errno(ret); + else + ret = NOTIFY_OK; + + return ret; +} + +static struct notifier_block cmm_mem_isolate_nb = { + .notifier_call = cmm_memory_isolate_cb, + .priority = CMM_MEM_ISOLATE_PRI +}; + +/** + * cmm_mem_going_offline - Unloan pages where memory is to be removed + * @arg: memory_notify structure with page range to be offlined + * + * Return value: + * 0 on success + **/ +static int cmm_mem_going_offline(void *arg) +{ + struct memory_notify *marg = arg; + unsigned long start_page = (unsigned long)pfn_to_kaddr(marg->start_pfn); + unsigned long end_page = start_page + (marg->nr_pages << PAGE_SHIFT); + struct cmm_page_array *pa_curr, *pa_last, *npa; + unsigned long idx; + unsigned long freed = 0; + + cmm_dbg("Memory going offline, searching 0x%lx (%ld pages).\n", + start_page, marg->nr_pages); + spin_lock(&cmm_lock); + + /* Search the page list for pages in the range to be offlined */ + pa_last = pa_curr = cmm_page_list; + while (pa_curr) { + for (idx = (pa_curr->index - 1); (idx + 1) > 0; idx--) { + if ((pa_curr->page[idx] < start_page) || + (pa_curr->page[idx] >= end_page)) + continue; + + plpar_page_set_active(__pa(pa_curr->page[idx])); + free_page(pa_curr->page[idx]); + freed++; + loaned_pages--; + totalram_pages++; + pa_curr->page[idx] = pa_last->page[--pa_last->index]; + if (pa_last->index == 0) { + if (pa_curr == pa_last) + pa_curr = pa_last->next; + pa_last = pa_last->next; + free_page((unsigned long)cmm_page_list); + cmm_page_list = pa_last; + continue; + } + } + pa_curr = pa_curr->next; + } + + /* Search for page list structures in the range to be offlined */ + pa_last = NULL; + pa_curr = cmm_page_list; + while (pa_curr) { + if (((unsigned long)pa_curr >= start_page) && + ((unsigned long)pa_curr < end_page)) { + npa = (struct cmm_page_array *)__get_free_page( + GFP_NOIO | __GFP_NOWARN | + __GFP_NORETRY | __GFP_NOMEMALLOC); + if (!npa) { + spin_unlock(&cmm_lock); + cmm_dbg("Failed to allocate memory for list " + "management. Memory hotplug " + "failed.\n"); + return ENOMEM; + } + memcpy(npa, pa_curr, PAGE_SIZE); + if (pa_curr == cmm_page_list) + cmm_page_list = npa; + if (pa_last) + pa_last->next = npa; + free_page((unsigned long) pa_curr); + freed++; + pa_curr = npa; + } + + pa_last = pa_curr; + pa_curr = pa_curr->next; + } + + spin_unlock(&cmm_lock); + cmm_dbg("Released %ld pages in the search range.\n", freed); + + return 0; +} + +/** + * cmm_memory_cb - Handle memory hotplug notifier calls + * @self: notifier block struct + * @action: action to take + * @arg: struct memory_notify data for handler + * + * Return value: + * NOTIFY_OK or notifier error based on subfunction return value + * + **/ +static int cmm_memory_cb(struct notifier_block *self, + unsigned long action, void *arg) +{ + int ret = 0; + + switch (action) { + case MEM_GOING_OFFLINE: + mutex_lock(&hotplug_mutex); + hotplug_occurred = 1; + ret = cmm_mem_going_offline(arg); + break; + case MEM_OFFLINE: + case MEM_CANCEL_OFFLINE: + mutex_unlock(&hotplug_mutex); + cmm_dbg("Memory offline operation complete.\n"); + break; + case MEM_GOING_ONLINE: + case MEM_ONLINE: + case MEM_CANCEL_ONLINE: + break; + } + + if (ret) + ret = notifier_from_errno(ret); + else + ret = NOTIFY_OK; + + return ret; +} + +static struct notifier_block cmm_mem_nb = { + .notifier_call = cmm_memory_cb, + .priority = CMM_MEM_HOTPLUG_PRI +}; + /** * cmm_init - Module initialization * @@ -435,18 +669,24 @@ static int cmm_init(void) if ((rc = cmm_sysfs_register(&cmm_sysdev))) goto out_reboot_notifier; + if (register_memory_notifier(&cmm_mem_nb) || + register_memory_isolate_notifier(&cmm_mem_isolate_nb)) + goto out_unregister_notifier; + if (cmm_disabled) return rc; cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); if (IS_ERR(cmm_thread_ptr)) { rc = PTR_ERR(cmm_thread_ptr); - goto out_unregister_sysfs; + goto out_unregister_notifier; } return rc; -out_unregister_sysfs: +out_unregister_notifier: + unregister_memory_notifier(&cmm_mem_nb); + unregister_memory_isolate_notifier(&cmm_mem_isolate_nb); cmm_unregister_sysfs(&cmm_sysdev); out_reboot_notifier: unregister_reboot_notifier(&cmm_reboot_nb); @@ -467,6 +707,8 @@ static void cmm_exit(void) kthread_stop(cmm_thread_ptr); unregister_oom_notifier(&cmm_oom_nb); unregister_reboot_notifier(&cmm_reboot_nb); + unregister_memory_notifier(&cmm_mem_nb); + unregister_memory_isolate_notifier(&cmm_mem_isolate_nb); cmm_free_pages(loaned_pages); cmm_unregister_sysfs(&cmm_sysdev); } From 5c916a295f27dbc0df4769a53b109666506bd061 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 17 Dec 2009 14:45:05 +0000 Subject: [PATCH 17/36] powerpc/iseries: Convert to proc_fops Signed-off-by: Alexey Dobriyan Cc: Benjamin Herrenschmidt Cc: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/iseries/mf.c | 151 ++++++++++++++++------------ 1 file changed, 85 insertions(+), 66 deletions(-) diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 0d9343df35b..6617915bcb1 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -855,59 +855,58 @@ static int mf_get_boot_rtc(struct rtc_time *tm) } #ifdef CONFIG_PROC_FS - -static int proc_mf_dump_cmdline(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int mf_cmdline_proc_show(struct seq_file *m, void *v) { - int len; - char *p; + char *page, *p; struct vsp_cmd_data vsp_cmd; int rc; dma_addr_t dma_addr; /* The HV appears to return no more than 256 bytes of command line */ - if (off >= 256) - return 0; - if ((off + count) > 256) - count = 256 - off; - - dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE); - if (dma_addr == DMA_ERROR_CODE) + page = kmalloc(256, GFP_KERNEL); + if (!page) return -ENOMEM; - memset(page, 0, off + count); + + dma_addr = iseries_hv_map(page, 256, DMA_FROM_DEVICE); + if (dma_addr == DMA_ERROR_CODE) { + kfree(page); + return -ENOMEM; + } + memset(page, 0, 256); memset(&vsp_cmd, 0, sizeof(vsp_cmd)); vsp_cmd.cmd = 33; vsp_cmd.sub_data.kern.token = dma_addr; vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; - vsp_cmd.sub_data.kern.side = (u64)data; - vsp_cmd.sub_data.kern.length = off + count; + vsp_cmd.sub_data.kern.side = (u64)m->private; + vsp_cmd.sub_data.kern.length = 256; mb(); rc = signal_vsp_instruction(&vsp_cmd); - iseries_hv_unmap(dma_addr, off + count, DMA_FROM_DEVICE); - if (rc) + iseries_hv_unmap(dma_addr, 256, DMA_FROM_DEVICE); + if (rc) { + kfree(page); return rc; - if (vsp_cmd.result_code != 0) + } + if (vsp_cmd.result_code != 0) { + kfree(page); return -ENOMEM; + } p = page; - len = 0; - while (len < (off + count)) { - if ((*p == '\0') || (*p == '\n')) { - if (*p == '\0') - *p = '\n'; - p++; - len++; - *eof = 1; + while (p - page < 256) { + if (*p == '\0' || *p == '\n') { + *p = '\n'; break; } p++; - len++; - } - if (len < off) { - *eof = 1; - len = 0; } - return len; + seq_write(m, page, p - page); + kfree(page); + return 0; +} + +static int mf_cmdline_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mf_cmdline_proc_show, PDE(inode)->data); } #if 0 @@ -962,10 +961,8 @@ static int proc_mf_dump_vmlinux(char *page, char **start, off_t off, } #endif -static int proc_mf_dump_side(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int mf_side_proc_show(struct seq_file *m, void *v) { - int len; char mf_current_side = ' '; struct vsp_cmd_data vsp_cmd; @@ -989,21 +986,17 @@ static int proc_mf_dump_side(char *page, char **start, off_t off, } } - len = sprintf(page, "%c\n", mf_current_side); - - if (len <= (off + count)) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; + seq_printf(m, "%c\n", mf_current_side); + return 0; } -static int proc_mf_change_side(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int mf_side_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mf_side_proc_show, NULL); +} + +static ssize_t mf_side_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { char side; u64 newSide; @@ -1041,6 +1034,15 @@ static int proc_mf_change_side(struct file *file, const char __user *buffer, return count; } +static const struct file_operations mf_side_proc_fops = { + .owner = THIS_MODULE, + .open = mf_side_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mf_side_proc_write, +}; + #if 0 static void mf_getSrcHistory(char *buffer, int size) { @@ -1087,8 +1089,7 @@ static void mf_getSrcHistory(char *buffer, int size) } #endif -static int proc_mf_dump_src(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int mf_src_proc_show(struct seq_file *m, void *v) { #if 0 int len; @@ -1109,8 +1110,13 @@ static int proc_mf_dump_src(char *page, char **start, off_t off, #endif } -static int proc_mf_change_src(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static int mf_src_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mf_src_proc_show, NULL); +} + +static ssize_t mf_src_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { char stkbuf[10]; @@ -1135,9 +1141,19 @@ static int proc_mf_change_src(struct file *file, const char __user *buffer, return count; } -static int proc_mf_change_cmdline(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static const struct file_operations mf_src_proc_fops = { + .owner = THIS_MODULE, + .open = mf_src_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mf_src_proc_write, +}; + +static ssize_t mf_cmdline_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { + void *data = PDE(file->f_path.dentry->d_inode)->data; struct vsp_cmd_data vsp_cmd; dma_addr_t dma_addr; char *page; @@ -1172,6 +1188,15 @@ out: return ret; } +static const struct file_operations mf_cmdline_proc_fops = { + .owner = THIS_MODULE, + .open = mf_cmdline_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mf_cmdline_proc_write, +}; + static ssize_t proc_mf_change_vmlinux(struct file *file, const char __user *buf, size_t count, loff_t *ppos) @@ -1246,12 +1271,10 @@ static int __init mf_proc_init(void) if (!mf) return 1; - ent = create_proc_entry("cmdline", S_IFREG|S_IRUSR|S_IWUSR, mf); + ent = proc_create_data("cmdline", S_IRUSR|S_IWUSR, mf, + &mf_cmdline_proc_fops, (void *)(long)i); if (!ent) return 1; - ent->data = (void *)(long)i; - ent->read_proc = proc_mf_dump_cmdline; - ent->write_proc = proc_mf_change_cmdline; if (i == 3) /* no vmlinux entry for 'D' */ continue; @@ -1263,19 +1286,15 @@ static int __init mf_proc_init(void) return 1; } - ent = create_proc_entry("side", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root); + ent = proc_create("side", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root, + &mf_side_proc_fops); if (!ent) return 1; - ent->data = (void *)0; - ent->read_proc = proc_mf_dump_side; - ent->write_proc = proc_mf_change_side; - ent = create_proc_entry("src", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root); + ent = proc_create("src", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root, + &mf_src_proc_fops); if (!ent) return 1; - ent->data = (void *)0; - ent->read_proc = proc_mf_dump_src; - ent->write_proc = proc_mf_change_src; return 0; } From 29827b02dc5d1eed8a1ff8b34cd1926966a87e89 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 17 Dec 2009 14:45:15 +0000 Subject: [PATCH 18/36] powerpc/85xx: Wrong variable returned on error The wrong variable was returned in the case of an error. Signed-off-by: Roel Kluin Cc: Kumar Gala Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/85xx/mpc85xx_mds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index c5028a2e5a5..21f61b8c445 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -86,7 +86,7 @@ static int mpc8568_fixup_125_clock(struct phy_device *phydev) scr = phy_read(phydev, MV88E1111_SCR); if (scr < 0) - return err; + return scr; err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008); From 8a55c4ba3ed95f3f73f5ee371e863a1deadaec5f Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 27 Nov 2009 06:33:58 +0000 Subject: [PATCH 19/36] powerpc/pseries: Select XICS and PCI_MSI PSERIES It's possible to set CONFIG_XICS without CONFIG_PCI_MSI. When that happens, the kernel fails to build with arch/powerpc/platforms/built-in.o: In function `.xics_startup': xics.c:(.text+0x12f60): undefined reference to `.unmask_msi_irq' make: *** [.tmp_vmlinux1] Error 1 Furthermore, as noted by Benjamin Herrenschmidt, "CONFIG_XICS should be made invisible and selected by PSERIES." This patch fixes PSERIES to select both options Signed-off-by: Mel Gorman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 27554c807fd..c667f0f02c3 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -2,6 +2,8 @@ config PPC_PSERIES depends on PPC64 && PPC_BOOK3S bool "IBM pSeries & new (POWER5-based) iSeries" select MPIC + select PCI_MSI + select XICS select PPC_I8259 select PPC_RTAS select PPC_RTAS_DAEMON From c2613c7f80eca4d334b3da18a2059d82b750b628 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 6 Dec 2009 17:45:09 +0000 Subject: [PATCH 20/36] powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modules Machines with acenic adapters are rare these days, so we may as well make it a module. Cramfs is also very rarely used so we can make it a module. Together this saves 143kB on a 64bit compile: text data bss dec hex filename 8247176 1729404 1221988 11198568 aae068 vmlinux~ 8134997 1727588 1188836 11051421 a8a19d vmlinux Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/g5_defconfig | 2 +- arch/powerpc/configs/ppc64_defconfig | 4 ++-- arch/powerpc/configs/pseries_defconfig | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index fc905924c02..6a66135533c 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -757,7 +757,7 @@ CONFIG_SUNGEM=y # CONFIG_B44 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y -CONFIG_ACENIC=y +CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 25240182457..34a6b12c02f 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -980,7 +980,7 @@ CONFIG_E100=y # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y -CONFIG_ACENIC=y +CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y @@ -1863,7 +1863,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y +CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index c568329723b..6ea82df4bfc 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -796,7 +796,7 @@ CONFIG_E100=y # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y -CONFIG_ACENIC=y +CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y @@ -1494,7 +1494,7 @@ CONFIG_CONFIGFS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y +CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set From 55f2fa147392ffd23cec56cbb3d85ab5b3ebc125 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 6 Dec 2009 17:45:55 +0000 Subject: [PATCH 21/36] powerpc/defconfigs: Disable token ring in powerpc defconfigs Token what? Lets save some space in our powerpc kernels and remove token ring support. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/g5_defconfig | 4 ++-- arch/powerpc/configs/iseries_defconfig | 4 ++-- arch/powerpc/configs/ppc64_defconfig | 4 ++-- arch/powerpc/configs/ppc64e_defconfig | 4 ++-- arch/powerpc/configs/pseries_defconfig | 4 ++-- 5 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 6a66135533c..826a65d3f00 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -794,8 +794,8 @@ CONFIG_NETDEV_10000=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index f925c555508..76982c51a4c 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -714,8 +714,8 @@ CONFIG_NETDEV_10000=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 34a6b12c02f..4b043f97338 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1023,8 +1023,8 @@ CONFIG_PASEMI_MAC=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig index 18af4603625..8195f1650cb 100644 --- a/arch/powerpc/configs/ppc64e_defconfig +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -1008,8 +1008,8 @@ CONFIG_IXGB=m # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set CONFIG_WLAN=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 6ea82df4bfc..e89fccbb4a6 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -834,8 +834,8 @@ CONFIG_S2IO=m # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set -CONFIG_TR=y -CONFIG_IBMOL=y +# CONFIG_TR is not set +# CONFIG_IBMOL is not set # CONFIG_3C359 is not set # CONFIG_TMS380TR is not set From 030bdc3fd0807b6097a937468859f4b4baf1b950 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 6 Dec 2009 17:48:33 +0000 Subject: [PATCH 22/36] powerpc/defconfigs: Set HZ=100 on pseries and ppc64 defconfigs Now we have high res timers there is less of a reason for a high HZ value. Furthermore I think there a few reasons we should reduce HZ to 100: - Timer interrupt overhead. While this overhead is small, there are applications that are very sensitive to jitter (eg some HPC apps). - Issues with the timer wheel code. When coming out of NO_HZ idle we work our way through the timer code one tick at a time. If we have been idle a long time, this adds up - I sometimes see milliseconds of time spent in that loop. Long term we should fix the timer wheel algorithm, but for now if we reduce HZ then we reduce the amount of work the timer code has to do when coming out of idle. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 6 +++--- arch/powerpc/configs/pseries_defconfig | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 4b043f97338..7b3804a6e36 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -304,11 +304,11 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index e89fccbb4a6..ca9ff9aad74 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -230,11 +230,11 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set From 50891457f1001450be61be0861b2b49abdcb5fb9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 Dec 2009 21:08:44 +0000 Subject: [PATCH 23/36] powerpc/mm: Fix a WARN_ON() with CONFIG_DEBUG_PAGEALLOC and CONFIG_DEBUG_VM Set need to call __set_pte_at() and not set_pte_at() from __change_page_attr() since the later will perform checks with CONFIG_DEBUG_VM that aren't suitable to the way we override an existing PTE. (More specifically, it doesn't let you write over a present PTE). Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 177e4038b43..573b3bd1c45 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -382,7 +382,7 @@ static int __change_page_attr(struct page *page, pgprot_t prot) return 0; if (!get_pteptr(&init_mm, address, &kpte, &kpmd)) return -EINVAL; - set_pte_at(&init_mm, address, kpte, mk_pte(page, prot)); + __set_pte_at(&init_mm, address, kpte, mk_pte(page, prot), 0); wmb(); #ifdef CONFIG_PPC_STD_MMU flush_hash_pages(0, address, pmd_val(*kpmd), 1); From e9edb232d3b0848457a83a5b697f55264542892f Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Thu, 10 Dec 2009 01:19:37 +0000 Subject: [PATCH 24/36] powerpc/pseries: Don't panic when H_PROD fails during cpu-online. If an online-attempt on a CPU which has been offlined using H_CEDE with an appropriate cede latency hint fails, don't panic. Instead print the error message and let the __cpu_up() code notify the CPU Hotplug framework of the failure, which in turn can notify the other subsystem through CPU_UP_CANCELED. Signed-off-by: Gautham R Shenoy Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/smp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 8868c012268..b4886635972 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -144,8 +144,8 @@ static void __devinit smp_pSeries_kick_cpu(int nr) hcpuid = get_hard_smp_processor_id(nr); rc = plpar_hcall_norets(H_PROD, hcpuid); if (rc != H_SUCCESS) - panic("Error: Prod to wake up processor %d Ret= %ld\n", - nr, rc); + printk(KERN_ERR "Error: Prod to wake up processor %d\ + Ret= %ld\n", nr, rc); } } From 3d9b740b2d8d73795d745a46eabd55479ee68dcc Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Thu, 10 Dec 2009 01:19:42 +0000 Subject: [PATCH 25/36] powerpc/pseries: Make declarations of cpu_hotplug_driver_lock() ANSI compatible. And add the __acquires() and __releases() annotations, while at it. Signed-off-by: Gautham R Shenoy Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/dlpar.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 12df9e8812a..67b7a10f9fc 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -346,12 +346,14 @@ int dlpar_release_drc(u32 drc_index) static DEFINE_MUTEX(pseries_cpu_hotplug_mutex); -void cpu_hotplug_driver_lock() +void cpu_hotplug_driver_lock(void) +__acquires(pseries_cpu_hotplug_mutex) { mutex_lock(&pseries_cpu_hotplug_mutex); } -void cpu_hotplug_driver_unlock() +void cpu_hotplug_driver_unlock(void) +__releases(pseries_cpu_hotplug_mutex) { mutex_unlock(&pseries_cpu_hotplug_mutex); } From 01ae45bcd48527e90923d4a247259770eb836d2b Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 10 Dec 2009 07:28:19 +0000 Subject: [PATCH 26/36] powerpc: Convert BUG() to use unreachable() Use the new unreachable() macro instead of for(;;); Signed-off-by: David Daney CC: Benjamin Herrenschmidt CC: Paul Mackerras CC: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/bug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h index 64e1fdca233..2c15212e170 100644 --- a/arch/powerpc/include/asm/bug.h +++ b/arch/powerpc/include/asm/bug.h @@ -68,7 +68,7 @@ _EMIT_BUG_ENTRY \ : : "i" (__FILE__), "i" (__LINE__), \ "i" (0), "i" (sizeof(struct bug_entry))); \ - for(;;) ; \ + unreachable(); \ } while (0) #define BUG_ON(x) do { \ From 5c3399198791f7f828eb9fd504dbb46eef3cb472 Mon Sep 17 00:00:00 2001 From: "Sachin P. Sant" Date: Sun, 13 Dec 2009 21:15:12 +0000 Subject: [PATCH 27/36] powerpc/mm: Fix hash_utils_64.c compile errors with DEBUG enabled. This time without the funny characters. Fix following build errors generated with DEBUG=1 cc1: warnings being treated as errors arch/powerpc/mm/hash_utils_64.c: In function 'htab_dt_scan_page_sizes': arch/powerpc/mm/hash_utils_64.c:343: error: format '%04x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' arch/powerpc/mm/hash_utils_64.c:343: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'long unsigned int' arch/powerpc/mm/hash_utils_64.c: In function 'htab_initialize': arch/powerpc/mm/hash_utils_64.c:666: error: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' ... SNIP ... Signed-off-by: Sachin Sant Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hash_utils_64.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 50f867d657d..c7fa4dac2f4 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -340,7 +340,7 @@ static int __init htab_dt_scan_page_sizes(unsigned long node, else def->tlbiel = 0; - DBG(" %d: shift=%02x, sllp=%04x, avpnm=%08x, " + DBG(" %d: shift=%02x, sllp=%04lx, avpnm=%08lx, " "tlbiel=%d, penc=%d\n", idx, shift, def->sllp, def->avpnm, def->tlbiel, def->penc); @@ -663,7 +663,7 @@ static void __init htab_initialize(void) base = (unsigned long)__va(lmb.memory.region[i].base); size = lmb.memory.region[i].size; - DBG("creating mapping for region: %lx..%lx (prot: %x)\n", + DBG("creating mapping for region: %lx..%lx (prot: %lx)\n", base, size, prot); #ifdef CONFIG_U3_DART @@ -1115,7 +1115,7 @@ void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize, { unsigned long hash, index, shift, hidx, slot; - DBG_LOW("flush_hash_page(va=%016x)\n", va); + DBG_LOW("flush_hash_page(va=%016lx)\n", va); pte_iterate_hashed_subpages(pte, psize, va, index, shift) { hash = hpt_hash(va, shift, ssize); hidx = __rpte_to_hidx(pte, index); @@ -1123,7 +1123,7 @@ void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize, hash = ~hash; slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; slot += hidx & _PTEIDX_GROUP_IX; - DBG_LOW(" sub %d: hash=%x, hidx=%x\n", index, slot, hidx); + DBG_LOW(" sub %ld: hash=%lx, hidx=%lx\n", index, slot, hidx); ppc_md.hpte_invalidate(slot, va, psize, ssize, local); } pte_iterate_hashed_end(); } From f04b10cddb0fbceadbad7af38c31543298948d8f Mon Sep 17 00:00:00 2001 From: Yang Li Date: Mon, 14 Dec 2009 03:01:49 +0000 Subject: [PATCH 28/36] powerpc/mm: Fix typo of cpumask_clear_cpu() The function name of cpumask_clear_cpu was not correct. Fortunately nobody uses that code with hotplug yet :-) Reported-by: Jin Qing Signed-off-by: Li Yang Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mmu_context_nohash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index be4f34c30a0..1044a634b6d 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -353,7 +353,7 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self, read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) - cpu_mask_clear_cpu(cpu, mm_cpumask(p->mm)); + cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); break; From bb7f20b1c639606def3b91f4e4aca6daeee5d80a Mon Sep 17 00:00:00 2001 From: Neil Campbell Date: Mon, 14 Dec 2009 04:08:57 +0000 Subject: [PATCH 29/36] powerpc: Handle VSX alignment faults correctly in little-endian mode This patch fixes the handling of VSX alignment faults in little-endian mode (the current code assumes the processor is in big-endian mode). The patch also makes the handlers clear the top 8 bytes of the register when handling an 8 byte VSX load. This is based on 2.6.32. Signed-off-by: Neil Campbell Cc: Acked-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/align.c | 63 +++++++++++++++++++++++++++---------- 1 file changed, 46 insertions(+), 17 deletions(-) diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 3839839f83c..b876e989220 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -642,10 +642,14 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, */ static int emulate_vsx(unsigned char __user *addr, unsigned int reg, unsigned int areg, struct pt_regs *regs, - unsigned int flags, unsigned int length) + unsigned int flags, unsigned int length, + unsigned int elsize) { char *ptr; + unsigned long *lptr; int ret = 0; + int sw = 0; + int i, j; flush_vsx_to_thread(current); @@ -654,19 +658,35 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg, else ptr = (char *) ¤t->thread.vr[reg - 32]; - if (flags & ST) - ret = __copy_to_user(addr, ptr, length); - else { - if (flags & SPLT){ - ret = __copy_from_user(ptr, addr, length); - ptr += length; + lptr = (unsigned long *) ptr; + + if (flags & SW) + sw = elsize-1; + + for (j = 0; j < length; j += elsize) { + for (i = 0; i < elsize; ++i) { + if (flags & ST) + ret |= __put_user(ptr[i^sw], addr + i); + else + ret |= __get_user(ptr[i^sw], addr + i); } - ret |= __copy_from_user(ptr, addr, length); + ptr += elsize; + addr += elsize; } - if (flags & U) - regs->gpr[areg] = regs->dar; - if (ret) + + if (!ret) { + if (flags & U) + regs->gpr[areg] = regs->dar; + + /* Splat load copies the same data to top and bottom 8 bytes */ + if (flags & SPLT) + lptr[1] = lptr[0]; + /* For 8 byte loads, zero the top 8 bytes */ + else if (!(flags & ST) && (8 == length)) + lptr[1] = 0; + } else return -EFAULT; + return 1; } #endif @@ -767,16 +787,25 @@ int fix_alignment(struct pt_regs *regs) #ifdef CONFIG_VSX if ((instruction & 0xfc00003e) == 0x7c000018) { - /* Additional register addressing bit (64 VSX vs 32 FPR/GPR */ + unsigned int elsize; + + /* Additional register addressing bit (64 VSX vs 32 FPR/GPR) */ reg |= (instruction & 0x1) << 5; /* Simple inline decoder instead of a table */ + /* VSX has only 8 and 16 byte memory accesses */ + nb = 8; if (instruction & 0x200) nb = 16; - else if (instruction & 0x080) - nb = 8; - else - nb = 4; + + /* Vector stores in little-endian mode swap individual + elements, so process them separately */ + elsize = 4; + if (instruction & 0x80) + elsize = 8; + flags = 0; + if (regs->msr & MSR_LE) + flags |= SW; if (instruction & 0x100) flags |= ST; if (instruction & 0x040) @@ -787,7 +816,7 @@ int fix_alignment(struct pt_regs *regs) nb = 8; } PPC_WARN_ALIGNMENT(vsx, regs); - return emulate_vsx(addr, reg, areg, regs, flags, nb); + return emulate_vsx(addr, reg, areg, regs, flags, nb, elsize); } #endif /* A size of 0 indicates an instruction we don't support, with From 7a96c6b22efbd84e195836e192a3ce478cd6e14c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 14 Dec 2009 15:31:13 +0000 Subject: [PATCH 30/36] powerpc: Fix MSI support on U4 bridge PCIe slot On machines using the Apple U4 bridge (AKA IBM CPC945) PCIe interface such as the latest generation G5 machines x16 slot or the x16 slot of the PowerStation, MSIs are currently broken (and will oops when enabling). This fixes the oops and implements proper support for those. Instead of using the PCIe <-> HT bridge conversion, on such slots we need to use a bunch of magic registers in the bridge as the MSI target, encoding the interrupt number in the low bits of the address itself Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic_msi.c | 11 +++++++- arch/powerpc/sysdev/mpic_u3msi.c | 46 +++++++++++++++++++++++++++----- 2 files changed, 49 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c index 1d44eee80fa..0f67cd79d48 100644 --- a/arch/powerpc/sysdev/mpic_msi.c +++ b/arch/powerpc/sysdev/mpic_msi.c @@ -39,7 +39,12 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic) pr_debug("mpic: found U3, guessing msi allocator setup\n"); - /* Reserve source numbers we know are reserved in the HW */ + /* Reserve source numbers we know are reserved in the HW. + * + * This is a bit of a mix of U3 and U4 reserves but that's going + * to work fine, we have plenty enugh numbers left so let's just + * mark anything we don't like reserved. + */ for (i = 0; i < 8; i++) msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i); @@ -49,6 +54,10 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic) for (i = 100; i < 105; i++) msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i); + for (i = 124; i < mpic->irq_count; i++) + msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i); + + np = NULL; while ((np = of_find_all_nodes(np))) { pr_debug("mpic: mapping hwirqs for %s\n", np->full_name); diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c index d3caf23e631..bcbfe79c704 100644 --- a/arch/powerpc/sysdev/mpic_u3msi.c +++ b/arch/powerpc/sysdev/mpic_u3msi.c @@ -64,12 +64,12 @@ static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos) return addr; } -static u64 find_ht_magic_addr(struct pci_dev *pdev) +static u64 find_ht_magic_addr(struct pci_dev *pdev, unsigned int hwirq) { struct pci_bus *bus; unsigned int pos; - for (bus = pdev->bus; bus; bus = bus->parent) { + for (bus = pdev->bus; bus && bus->self; bus = bus->parent) { pos = pci_find_ht_capability(bus->self, HT_CAPTYPE_MSI_MAPPING); if (pos) return read_ht_magic_addr(bus->self, pos); @@ -78,13 +78,41 @@ static u64 find_ht_magic_addr(struct pci_dev *pdev) return 0; } +static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + + /* U4 PCIe MSIs need to write to the special register in + * the bridge that generates interrupts. There should be + * theorically a register at 0xf8005000 where you just write + * the MSI number and that triggers the right interrupt, but + * unfortunately, this is busted in HW, the bridge endian swaps + * the value and hits the wrong nibble in the register. + * + * So instead we use another register set which is used normally + * for converting HT interrupts to MPIC interrupts, which decodes + * the interrupt number as part of the low address bits + * + * This will not work if we ever use more than one legacy MSI in + * a block but we never do. For one MSI or multiple MSI-X where + * each interrupt address can be specified separately, it works + * just fine. + */ + if (of_device_is_compatible(hose->dn, "u4-pcie") || + of_device_is_compatible(hose->dn, "U4-pcie")) + return 0xf8004000 | (hwirq << 4); + + return 0; +} + static int u3msi_msi_check_device(struct pci_dev *pdev, int nvec, int type) { if (type == PCI_CAP_ID_MSIX) pr_debug("u3msi: MSI-X untested, trying anyway.\n"); /* If we can't find a magic address then MSI ain't gonna work */ - if (find_ht_magic_addr(pdev) == 0) { + if (find_ht_magic_addr(pdev, 0) == 0 && + find_u4_magic_addr(pdev, 0) == 0) { pr_debug("u3msi: no magic address found for %s\n", pci_name(pdev)); return -ENXIO; @@ -118,10 +146,6 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) u64 addr; int hwirq; - addr = find_ht_magic_addr(pdev); - msg.address_lo = addr & 0xFFFFFFFF; - msg.address_hi = addr >> 32; - list_for_each_entry(entry, &pdev->msi_list, list) { hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, 1); if (hwirq < 0) { @@ -129,6 +153,12 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) return hwirq; } + addr = find_ht_magic_addr(pdev, hwirq); + if (addr == 0) + addr = find_u4_magic_addr(pdev, hwirq); + msg.address_lo = addr & 0xFFFFFFFF; + msg.address_hi = addr >> 32; + virq = irq_create_mapping(msi_mpic->irqhost, hwirq); if (virq == NO_IRQ) { pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq); @@ -143,6 +173,8 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) pr_debug("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", virq, hwirq, (unsigned long)addr); + printk("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", + virq, hwirq, (unsigned long)addr); msg.data = hwirq; write_msi_msg(virq, &msg); From c3a66359398028cd8e5f32611950dc7dc32ea2f2 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Wed, 16 Dec 2009 04:35:57 +0000 Subject: [PATCH 31/36] powerpc/iseries: use DECLARE_COMPLETION_ONSTACK for non-constant completion The _ONSTACK variant should be used for on-stack completion, otherwise it will break lockdep. Signed-off-by: Yong Zhang Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/iseries/viopath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index 49ff4dc422b..5aea94f3083 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -116,7 +116,7 @@ static int proc_viopath_show(struct seq_file *m, void *v) u16 vlanMap; dma_addr_t handle; HvLpEvent_Rc hvrc; - DECLARE_COMPLETION(done); + DECLARE_COMPLETION_ONSTACK(done); struct device_node *node; const char *sysid; From a1128f8f0ff06ccbea5d6b4a69446b506c57bfbc Mon Sep 17 00:00:00 2001 From: David Gibson Date: Wed, 16 Dec 2009 14:29:56 +0000 Subject: [PATCH 32/36] powerpc/mm: Fix stupid bug in subpge protection handling Commit d28513bc7f675d28b479db666d572e078ecf182d ("Fix bug in pagetable cache cleanup with CONFIG_PPC_SUBPAGE_PROT"), itself a fix for breakage caused by an earlier clean up patch of mine, contains a stupid bug. I changed the parameters of the subpage_protection() function, but failed to update one of the callers. This patch fixes it, and replaces a void * with a typed pointer so that the compiler will warn on such an error in future. Signed-off-by: David Gibson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hash_utils_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index c7fa4dac2f4..3ecdcec0a39 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -879,7 +879,7 @@ static inline int subpage_protection(struct mm_struct *mm, unsigned long ea) */ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) { - void *pgdir; + pgd_t *pgdir; unsigned long vsid; struct mm_struct *mm; pte_t *ptep; @@ -1025,7 +1025,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) else #endif /* CONFIG_PPC_HAS_HASH_64K */ { - int spp = subpage_protection(pgdir, ea); + int spp = subpage_protection(mm, ea); if (access & spp) rc = -2; else From 38e1313fc753482b93aa6c6f11cfbd43a5bcd963 Mon Sep 17 00:00:00 2001 From: Yang Li Date: Wed, 16 Dec 2009 20:18:11 +0000 Subject: [PATCH 33/36] powerpc/mpic: Fix problem that affinity is not updated Since commit 57b150cce8e004ddd36330490a68bfb59b7271e9, desc->affinity of an irq is changed after calling desc->chip->set_affinity. Therefore we need to fix the irq_choose_cpu() not to depend on the desc->affinity for new mask. Signed-off-by: Jiajun Wu Signed-off-by: Li Yang Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index aa9d06e5925..470dc6c11d5 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -567,13 +567,11 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) #endif /* CONFIG_MPIC_U3_HT_IRQS */ #ifdef CONFIG_SMP -static int irq_choose_cpu(unsigned int virt_irq) +static int irq_choose_cpu(const cpumask_t *mask) { - cpumask_t mask; int cpuid; - cpumask_copy(&mask, irq_to_desc(virt_irq)->affinity); - if (cpus_equal(mask, CPU_MASK_ALL)) { + if (cpumask_equal(mask, cpu_all_mask)) { static int irq_rover; static DEFINE_SPINLOCK(irq_rover_lock); unsigned long flags; @@ -594,20 +592,15 @@ static int irq_choose_cpu(unsigned int virt_irq) spin_unlock_irqrestore(&irq_rover_lock, flags); } else { - cpumask_t tmp; - - cpus_and(tmp, cpu_online_map, mask); - - if (cpus_empty(tmp)) + cpuid = cpumask_first_and(mask, cpu_online_mask); + if (cpuid >= nr_cpu_ids) goto do_round_robin; - - cpuid = first_cpu(tmp); } return get_hard_smp_processor_id(cpuid); } #else -static int irq_choose_cpu(unsigned int virt_irq) +static int irq_choose_cpu(const cpumask_t *mask) { return hard_smp_processor_id(); } @@ -816,7 +809,7 @@ int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask) unsigned int src = mpic_irq_to_hw(irq); if (mpic->flags & MPIC_SINGLE_DEST_CPU) { - int cpuid = irq_choose_cpu(irq); + int cpuid = irq_choose_cpu(cpumask); mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid); } else { From 698cd335a782561b79504d4e98c7df62b08e7abd Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Thu, 17 Dec 2009 08:33:41 +0000 Subject: [PATCH 34/36] powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg The retry logic in ug_putc() is broken. If the TX fifo is not ready and the counter runs out it will have a value of -1 and no transfer should be attempted. Also, a counter with a value of 0 means that the TX fifo got ready in the last try and the transfer should be attempted. Reported-by: "Juha Leppanen" Signed-off-by: "Juha Leppanen" Signed-off-by: Albert Herranz Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/ugecon.c | 2 +- arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/ugecon.c b/arch/powerpc/boot/ugecon.c index 50609ea6ddf..8f2a6b31153 100644 --- a/arch/powerpc/boot/ugecon.c +++ b/arch/powerpc/boot/ugecon.c @@ -86,7 +86,7 @@ static void ug_putc(char ch) while (!ug_is_txfifo_ready() && count--) barrier(); - if (count) + if (count >= 0) ug_raw_putc(ch); } diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c index edc956cc8b1..20a8ed91962 100644 --- a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c @@ -120,7 +120,7 @@ static void ug_putc(char ch) while (!ug_is_txfifo_ready() && count--) barrier(); - if (count) + if (count >= 0) ug_raw_putc(ch); } From 7ccec3e72693f48957f37949039bf2dfd1c80f22 Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Fri, 18 Dec 2009 10:04:42 +0000 Subject: [PATCH 35/36] powerpc/gc/wii: hlwd-pic: convert irq_desc.lock to raw_spinlock Fix the following build failures: arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_irq_cascade': arch/powerpc/platforms/embedded6xx/hlwd-pic.c:135: error: passing argument 1 of 'spin_lock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:137: error: passing argument 1 of 'spin_unlock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:145: error: passing argument 1 of 'spin_lock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:149: error: passing argument 1 of 'spin_unlock' from incompatible pointer type These failures are caused by the changes introduced in commit "genirq: Convert irq_desc.lock to raw_spinlock". The reason this driver was not updated is that it wasn't merged yet. Signed-off-by: Albert Herranz Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c index dd20bff3320..cba40d02070 100644 --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -132,9 +132,9 @@ static void hlwd_pic_irq_cascade(unsigned int cascade_virq, struct irq_host *irq_host = get_irq_data(cascade_virq); unsigned int virq; - spin_lock(&desc->lock); + raw_spin_lock(&desc->lock); desc->chip->mask(cascade_virq); /* IRQ_LEVEL */ - spin_unlock(&desc->lock); + raw_spin_unlock(&desc->lock); virq = __hlwd_pic_get_irq(irq_host); if (virq != NO_IRQ) @@ -142,11 +142,11 @@ static void hlwd_pic_irq_cascade(unsigned int cascade_virq, else pr_err("spurious interrupt!\n"); - spin_lock(&desc->lock); + raw_spin_lock(&desc->lock); desc->chip->ack(cascade_virq); /* IRQ_LEVEL */ if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) desc->chip->unmask(cascade_virq); - spin_unlock(&desc->lock); + raw_spin_unlock(&desc->lock); } /* From 95cd34b42b43c0ed5a89a764e023189bfe7b1530 Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Fri, 18 Dec 2009 10:04:05 +0000 Subject: [PATCH 36/36] powerpc/gc/wii: Remove get_irq_desc() Fix the following build failures: arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_map': arch/powerpc/platforms/embedded6xx/flipper-pic.c:105: error: implicit declaration of function 'get_irq_desc' arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_map': arch/powerpc/platforms/embedded6xx/hlwd-pic.c:98: error: implicit declaration of function 'get_irq_desc' These failures are caused by the changes introduced in commit "powerpc: Remove get_irq_desc()". The reason these drivers were not updated is that they weren't merged yet. Signed-off-by: Albert Herranz Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/embedded6xx/flipper-pic.c | 2 +- arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c index d5963285e3b..c278bd3a8fe 100644 --- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c @@ -102,7 +102,7 @@ static int flipper_pic_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { set_irq_chip_data(virq, h->host_data); - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &flipper_pic, handle_level_irq); return 0; } diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c index cba40d02070..a771f91e215 100644 --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -95,7 +95,7 @@ static int hlwd_pic_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { set_irq_chip_data(virq, h->host_data); - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &hlwd_pic, handle_level_irq); return 0; }