adulau/aha
1
0
Fork 0
mirror of https://github.com/adulau/aha.git synced 2024-12-27 03:06:10 +00:00
Code Issues Projects Releases Packages Wiki Activity

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx

Browse source 
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: at_hdmac: add DMA slave transfers
  dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller
  dmaengine: dmatest: correct thread_count while using multiple thread per channel
  dmaengine: dmatest: add a maximum number of test iterations
  drivers/dma: Remove unnecessary semicolons
  drivers/dma/fsldma.c: Remove unnecessary semicolons
  dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA
  fsldma: do not clear bandwidth control bits on the 83xx controller
  fsldma: enable external start for the 83xx controller
  fsldma: use PCI Read Multiple command
This commit is contained in:
Linus Torvalds 2009-07-30 16:46:31 -07:00
commit db06816cb9
10 changed files with 1711 additions and 13 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

102
arch/arm/mach-at91/include/mach/at_hdmac.h Normal file
View file

@ -0,0 +1,102 @@
/*
* Header file for the Atmel AHB DMA Controller driver
*
* Copyright (C) 2008 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT_HDMAC_H
#define AT_HDMAC_H
#include <linux/dmaengine.h>
/**
* struct at_dma_platform_data - Controller configuration parameters
* @nr_channels: Number of channels supported by hardware (max 8)
* @cap_mask: dma_capability flags supported by the platform
*/
struct at_dma_platform_data {
unsigned int nr_channels;
dma_cap_mask_t cap_mask;
};
/**
* enum at_dma_slave_width - DMA slave register access width.
* @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
* @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
* @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
*/
enum at_dma_slave_width {
AT_DMA_SLAVE_WIDTH_8BIT = 0,
AT_DMA_SLAVE_WIDTH_16BIT,
AT_DMA_SLAVE_WIDTH_32BIT,
};
/**
* struct at_dma_slave - Controller-specific information about a slave
* @dma_dev: required DMA master device
* @tx_reg: physical address of data register used for
* memory-to-peripheral transfers
* @rx_reg: physical address of data register used for
* peripheral-to-memory transfers
* @reg_width: peripheral register width
* @cfg: Platform-specific initializer for the CFG register
* @ctrla: Platform-specific initializer for the CTRLA register
*/
struct at_dma_slave {
struct device *dma_dev;
dma_addr_t tx_reg;
dma_addr_t rx_reg;
enum at_dma_slave_width reg_width;
u32 cfg;
u32 ctrla;
};
/* Platform-configurable bits in CFG */
#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */
#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */
#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */
#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */
#define ATC_SRC_H2SEL_SW (0x0 << 9)
#define ATC_SRC_H2SEL_HW (0x1 << 9)
#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */
#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */
#define ATC_DST_H2SEL_SW (0x0 << 13)
#define ATC_DST_H2SEL_HW (0x1 << 13)
#define ATC_SOD (0x1 << 16) /* Stop On Done */
#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */
#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */
#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */
#define ATC_LOCK_IF_L_CHUNK (0x0 << 22)
#define ATC_LOCK_IF_L_BUFFER (0x1 << 22)
#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */
#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */
#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28)
#define ATC_FIFOCFG_HALFFIFO (0x1 << 28)
#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28)
/* Platform-configurable bits in CTRLA */
#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */
#define ATC_SCSIZE_1 (0x0 << 16)
#define ATC_SCSIZE_4 (0x1 << 16)
#define ATC_SCSIZE_8 (0x2 << 16)
#define ATC_SCSIZE_16 (0x3 << 16)
#define ATC_SCSIZE_32 (0x4 << 16)
#define ATC_SCSIZE_64 (0x5 << 16)
#define ATC_SCSIZE_128 (0x6 << 16)
#define ATC_SCSIZE_256 (0x7 << 16)
#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */
#define ATC_DCSIZE_1 (0x0 << 20)
#define ATC_DCSIZE_4 (0x1 << 20)
#define ATC_DCSIZE_8 (0x2 << 20)
#define ATC_DCSIZE_16 (0x3 << 20)
#define ATC_DCSIZE_32 (0x4 << 20)
#define ATC_DCSIZE_64 (0x5 << 20)
#define ATC_DCSIZE_128 (0x6 << 20)
#define ATC_DCSIZE_256 (0x7 << 20)
#endif /* AT_HDMAC_H */

2
crypto/async_tx/async_xor.c
View file

@ -300,7 +300,7 @@ EXPORT_SYMBOL_GPL(async_xor_zero_sum);
static int __init async_xor_init(void)
{
#ifdef CONFIG_DMA_ENGINE
#ifdef CONFIG_ASYNC_TX_DMA
/* To conserve stack space the input src_list (array of page pointers)
* is reused to hold the array of dma addresses passed to the driver.
* This conversion is only possible when dma_addr_t is less than the

12
drivers/dma/Kconfig
View file

@ -4,7 +4,7 @@
menuconfig DMADEVICES
bool "DMA Engine support"
depends on !HIGHMEM64G && HAS_DMA
depends on HAS_DMA
help
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
@ -46,6 +46,14 @@ config DW_DMAC
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91SAM9RL
select DMA_ENGINE
help
Support the Atmel AHB DMA controller. This can be integrated in
chips such as the Atmel AT91SAM9RL.
config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"
depends on FSL_SOC
@ -108,7 +116,7 @@ config NET_DMA
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
depends on DMA_ENGINE
depends on DMA_ENGINE && !HIGHMEM64G
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has

1
drivers/dma/Makefile
View file

@ -7,5 +7,6 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o

1213
drivers/dma/at_hdmac.c Normal file
View file

File diff suppressed because it is too large Load diff

353
drivers/dma/at_hdmac_regs.h Normal file
View file

@ -0,0 +1,353 @@
/*
* Header file for the Atmel AHB DMA Controller driver
*
* Copyright (C) 2008 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT_HDMAC_REGS_H
#define AT_HDMAC_REGS_H
#include <mach/at_hdmac.h>
#define AT_DMA_MAX_NR_CHANNELS 8
#define AT_DMA_GCFG 0x00 /* Global Configuration Register */
#define AT_DMA_IF_BIGEND(i) (0x1 << (i)) /* AHB-Lite Interface i in Big-endian mode */
#define AT_DMA_ARB_CFG (0x1 << 4) /* Arbiter mode. */
#define AT_DMA_ARB_CFG_FIXED (0x0 << 4)
#define AT_DMA_ARB_CFG_ROUND_ROBIN (0x1 << 4)
#define AT_DMA_EN 0x04 /* Controller Enable Register */
#define AT_DMA_ENABLE (0x1 << 0)
#define AT_DMA_SREQ 0x08 /* Software Single Request Register */
#define AT_DMA_SSREQ(x) (0x1 << ((x) << 1)) /* Request a source single transfer on channel x */
#define AT_DMA_DSREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination single transfer on channel x */
#define AT_DMA_CREQ 0x0C /* Software Chunk Transfer Request Register */
#define AT_DMA_SCREQ(x) (0x1 << ((x) << 1)) /* Request a source chunk transfer on channel x */
#define AT_DMA_DCREQ(x) (0x1 << (1 + ((x) << 1))) /* Request a destination chunk transfer on channel x */
#define AT_DMA_LAST 0x10 /* Software Last Transfer Flag Register */
#define AT_DMA_SLAST(x) (0x1 << ((x) << 1)) /* This src rq is last tx of buffer on channel x */
#define AT_DMA_DLAST(x) (0x1 << (1 + ((x) << 1))) /* This dst rq is last tx of buffer on channel x */
#define AT_DMA_SYNC 0x14 /* Request Synchronization Register */
#define AT_DMA_SYR(h) (0x1 << (h)) /* Synchronize handshake line h */
/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */
#define AT_DMA_EBCIER 0x18 /* Enable register */
#define AT_DMA_EBCIDR 0x1C /* Disable register */
#define AT_DMA_EBCIMR 0x20 /* Mask Register */
#define AT_DMA_EBCISR 0x24 /* Status Register */
#define AT_DMA_CBTC_OFFSET 8
#define AT_DMA_ERR_OFFSET 16
#define AT_DMA_BTC(x) (0x1 << (x))
#define AT_DMA_CBTC(x) (0x1 << (AT_DMA_CBTC_OFFSET + (x)))
#define AT_DMA_ERR(x) (0x1 << (AT_DMA_ERR_OFFSET + (x)))
#define AT_DMA_CHER 0x28 /* Channel Handler Enable Register */
#define AT_DMA_ENA(x) (0x1 << (x))
#define AT_DMA_SUSP(x) (0x1 << ( 8 + (x)))
#define AT_DMA_KEEP(x) (0x1 << (24 + (x)))
#define AT_DMA_CHDR 0x2C /* Channel Handler Disable Register */
#define AT_DMA_DIS(x) (0x1 << (x))
#define AT_DMA_RES(x) (0x1 << ( 8 + (x)))
#define AT_DMA_CHSR 0x30 /* Channel Handler Status Register */
#define AT_DMA_EMPT(x) (0x1 << (16 + (x)))
#define AT_DMA_STAL(x) (0x1 << (24 + (x)))
#define AT_DMA_CH_REGS_BASE 0x3C /* Channel registers base address */
#define ch_regs(x) (AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */
/* Hardware register offset for each channel */
#define ATC_SADDR_OFFSET 0x00 /* Source Address Register */
#define ATC_DADDR_OFFSET 0x04 /* Destination Address Register */
#define ATC_DSCR_OFFSET 0x08 /* Descriptor Address Register */
#define ATC_CTRLA_OFFSET 0x0C /* Control A Register */
#define ATC_CTRLB_OFFSET 0x10 /* Control B Register */
#define ATC_CFG_OFFSET 0x14 /* Configuration Register */
#define ATC_SPIP_OFFSET 0x18 /* Src PIP Configuration Register */
#define ATC_DPIP_OFFSET 0x1C /* Dst PIP Configuration Register */
/* Bitfield definitions */
/* Bitfields in DSCR */
#define ATC_DSCR_IF(i) (0x3 & (i)) /* Dsc feched via AHB-Lite Interface i */
/* Bitfields in CTRLA */
#define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */
#define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
/* Chunck Tranfer size definitions are in at_hdmac.h */
#define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */
#define ATC_SRC_WIDTH(x) ((x) << 24)
#define ATC_SRC_WIDTH_BYTE (0x0 << 24)
#define ATC_SRC_WIDTH_HALFWORD (0x1 << 24)
#define ATC_SRC_WIDTH_WORD (0x2 << 24)
#define ATC_DST_WIDTH_MASK (0x3 << 28) /* Destination Single Transfer Size */
#define ATC_DST_WIDTH(x) ((x) << 28)
#define ATC_DST_WIDTH_BYTE (0x0 << 28)
#define ATC_DST_WIDTH_HALFWORD (0x1 << 28)
#define ATC_DST_WIDTH_WORD (0x2 << 28)
#define ATC_DONE (0x1 << 31) /* Tx Done (only written back in descriptor) */
/* Bitfields in CTRLB */
#define ATC_SIF(i) (0x3 & (i)) /* Src tx done via AHB-Lite Interface i */
#define ATC_DIF(i) ((0x3 & (i)) << 4) /* Dst tx done via AHB-Lite Interface i */
#define ATC_SRC_PIP (0x1 << 8) /* Source Picture-in-Picture enabled */
#define ATC_DST_PIP (0x1 << 12) /* Destination Picture-in-Picture enabled */
#define ATC_SRC_DSCR_DIS (0x1 << 16) /* Src Descriptor fetch disable */
#define ATC_DST_DSCR_DIS (0x1 << 20) /* Dst Descriptor fetch disable */
#define ATC_FC_MASK (0x7 << 21) /* Choose Flow Controller */
#define ATC_FC_MEM2MEM (0x0 << 21) /* Mem-to-Mem (DMA) */
#define ATC_FC_MEM2PER (0x1 << 21) /* Mem-to-Periph (DMA) */
#define ATC_FC_PER2MEM (0x2 << 21) /* Periph-to-Mem (DMA) */
#define ATC_FC_PER2PER (0x3 << 21) /* Periph-to-Periph (DMA) */
#define ATC_FC_PER2MEM_PER (0x4 << 21) /* Periph-to-Mem (Peripheral) */
#define ATC_FC_MEM2PER_PER (0x5 << 21) /* Mem-to-Periph (Peripheral) */
#define ATC_FC_PER2PER_SRCPER (0x6 << 21) /* Periph-to-Periph (Src Peripheral) */
#define ATC_FC_PER2PER_DSTPER (0x7 << 21) /* Periph-to-Periph (Dst Peripheral) */
#define ATC_SRC_ADDR_MODE_MASK (0x3 << 24)
#define ATC_SRC_ADDR_MODE_INCR (0x0 << 24) /* Incrementing Mode */
#define ATC_SRC_ADDR_MODE_DECR (0x1 << 24) /* Decrementing Mode */
#define ATC_SRC_ADDR_MODE_FIXED (0x2 << 24) /* Fixed Mode */
#define ATC_DST_ADDR_MODE_MASK (0x3 << 28)
#define ATC_DST_ADDR_MODE_INCR (0x0 << 28) /* Incrementing Mode */
#define ATC_DST_ADDR_MODE_DECR (0x1 << 28) /* Decrementing Mode */
#define ATC_DST_ADDR_MODE_FIXED (0x2 << 28) /* Fixed Mode */
#define ATC_IEN (0x1 << 30) /* BTC interrupt enable (active low) */
#define ATC_AUTO (0x1 << 31) /* Auto multiple buffer tx enable */
/* Bitfields in CFG */
/* are in at_hdmac.h */
/* Bitfields in SPIP */
#define ATC_SPIP_HOLE(x) (0xFFFFU & (x))
#define ATC_SPIP_BOUNDARY(x) ((0x3FF & (x)) << 16)
/* Bitfields in DPIP */
#define ATC_DPIP_HOLE(x) (0xFFFFU & (x))
#define ATC_DPIP_BOUNDARY(x) ((0x3FF & (x)) << 16)
/*-- descriptors -----------------------------------------------------*/
/* LLI == Linked List Item; aka DMA buffer descriptor */
struct at_lli {
/* values that are not changed by hardware */
dma_addr_t saddr;
dma_addr_t daddr;
/* value that may get written back: */
u32 ctrla;
/* more values that are not changed by hardware */
u32 ctrlb;
dma_addr_t dscr; /* chain to next lli */
};
/**
* struct at_desc - software descriptor
* @at_lli: hardware lli structure
* @txd: support for the async_tx api
* @desc_node: node on the channed descriptors list
* @len: total transaction bytecount
*/
struct at_desc {
/* FIRST values the hardware uses */
struct at_lli lli;
/* THEN values for driver housekeeping */
struct dma_async_tx_descriptor txd;
struct list_head desc_node;
size_t len;
};
static inline struct at_desc *
txd_to_at_desc(struct dma_async_tx_descriptor *txd)
{
return container_of(txd, struct at_desc, txd);
}
/*-- Channels --------------------------------------------------------*/
/**
* struct at_dma_chan - internal representation of an Atmel HDMAC channel
* @chan_common: common dmaengine channel object members
* @device: parent device
* @ch_regs: memory mapped register base
* @mask: channel index in a mask
* @error_status: transmit error status information from irq handler
* to tasklet (use atomic operations)
* @tasklet: bottom half to finish transaction work
* @lock: serializes enqueue/dequeue operations to descriptors lists
* @completed_cookie: identifier for the most recently completed operation
* @active_list: list of descriptors dmaengine is being running on
* @queue: list of descriptors ready to be submitted to engine
* @free_list: list of descriptors usable by the channel
* @descs_allocated: records the actual size of the descriptor pool
*/
struct at_dma_chan {
struct dma_chan chan_common;
struct at_dma *device;
void __iomem *ch_regs;
u8 mask;
unsigned long error_status;
struct tasklet_struct tasklet;
spinlock_t lock;
/* these other elements are all protected by lock */
dma_cookie_t completed_cookie;
struct list_head active_list;
struct list_head queue;
struct list_head free_list;
unsigned int descs_allocated;
};
#define channel_readl(atchan, name) \
__raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET)
#define channel_writel(atchan, name, val) \
__raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET)
static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
{
return container_of(dchan, struct at_dma_chan, chan_common);
}
/*-- Controller ------------------------------------------------------*/
/**
* struct at_dma - internal representation of an Atmel HDMA Controller
* @chan_common: common dmaengine dma_device object members
* @ch_regs: memory mapped register base
* @clk: dma controller clock
* @all_chan_mask: all channels availlable in a mask
* @dma_desc_pool: base of DMA descriptor region (DMA address)
* @chan: channels table to store at_dma_chan structures
*/
struct at_dma {
struct dma_device dma_common;
void __iomem *regs;
struct clk *clk;
u8 all_chan_mask;
struct dma_pool *dma_desc_pool;
/* AT THE END channels table */
struct at_dma_chan chan[0];
};
#define dma_readl(atdma, name) \
__raw_readl((atdma)->regs + AT_DMA_##name)
#define dma_writel(atdma, name, val) \
__raw_writel((val), (atdma)->regs + AT_DMA_##name)
static inline struct at_dma *to_at_dma(struct dma_device *ddev)
{
return container_of(ddev, struct at_dma, dma_common);
}
/*-- Helper functions ------------------------------------------------*/
static struct device *chan2dev(struct dma_chan *chan)
{
return &chan->dev->device;
}
static struct device *chan2parent(struct dma_chan *chan)
{
return chan->dev->device.parent;
}
#if defined(VERBOSE_DEBUG)
static void vdbg_dump_regs(struct at_dma_chan *atchan)
{
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
dev_err(chan2dev(&atchan->chan_common),
" channel %d : imr = 0x%x, chsr = 0x%x\n",
atchan->chan_common.chan_id,
dma_readl(atdma, EBCIMR),
dma_readl(atdma, CHSR));
dev_err(chan2dev(&atchan->chan_common),
" channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n",
channel_readl(atchan, SADDR),
channel_readl(atchan, DADDR),
channel_readl(atchan, CTRLA),
channel_readl(atchan, CTRLB),
channel_readl(atchan, CFG),
channel_readl(atchan, DSCR));
}
#else
static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
#endif
static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
{
dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common),
" desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
lli->saddr, lli->daddr,
lli->ctrla, lli->ctrlb, lli->dscr);
}
static void atc_setup_irq(struct at_dma_chan *atchan, int on)
{
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
u32 ebci;
/* enable interrupts on buffer chain completion & error */
ebci = AT_DMA_CBTC(atchan->chan_common.chan_id)
| AT_DMA_ERR(atchan->chan_common.chan_id);
if (on)
dma_writel(atdma, EBCIER, ebci);
else
dma_writel(atdma, EBCIDR, ebci);
}
static inline void atc_enable_irq(struct at_dma_chan *atchan)
{
atc_setup_irq(atchan, 1);
}
static inline void atc_disable_irq(struct at_dma_chan *atchan)
{
atc_setup_irq(atchan, 0);
}
/**
* atc_chan_is_enabled - test if given channel is enabled
* @atchan: channel we want to test status
*/
static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
{
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
return !!(dma_readl(atdma, CHSR) & atchan->mask);
}
/**
* set_desc_eol - set end-of-link to descriptor so it will end transfer
* @desc: descriptor, signle or at the end of a chain, to end chain on
*/
static void set_desc_eol(struct at_desc *desc)
{
desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
desc->lli.dscr = 0;
}
#endif /* AT_HDMAC_REGS_H */

21
drivers/dma/dmatest.c
View file

@ -38,6 +38,11 @@ module_param(max_channels, uint, S_IRUGO);
MODULE_PARM_DESC(max_channels,
"Maximum number of channels to use (default: all)");
static unsigned int iterations;
module_param(iterations, uint, S_IRUGO);
MODULE_PARM_DESC(iterations,
"Iterations before stopping test (default: infinite)");
static unsigned int xor_sources = 3;
module_param(xor_sources, uint, S_IRUGO);
MODULE_PARM_DESC(xor_sources,
@ -114,7 +119,7 @@ static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len)
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
for ( ; i < start + len; i++)
buf[i] = PATTERN_SRC | PATTERN_COPY
| (~i & PATTERN_COUNT_MASK);;
| (~i & PATTERN_COUNT_MASK);
for ( ; i < test_buf_size; i++)
buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
buf++;
@ -270,7 +275,8 @@ static int dmatest_func(void *data)
flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
while (!kthread_should_stop()) {
while (!kthread_should_stop()
&& !(iterations && total_tests >= iterations)) {
struct dma_device *dev = chan->device;
struct dma_async_tx_descriptor *tx = NULL;
dma_addr_t dma_srcs[src_cnt];
@ -416,6 +422,13 @@ err_srcbuf:
err_srcs:
pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
thread_name, total_tests, failed_tests, ret);
if (iterations > 0)
while (!kthread_should_stop()) {
DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
interruptible_sleep_on(&wait_dmatest_exit);
}
return ret;
}
@ -495,11 +508,11 @@ static int dmatest_add_channel(struct dma_chan *chan)
if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_MEMCPY);
thread_count += cnt > 0 ?: 0;
thread_count += cnt > 0 ? cnt : 0;
}
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
cnt = dmatest_add_threads(dtc, DMA_XOR);
thread_count += cnt > 0 ?: 0;
thread_count += cnt > 0 ? cnt : 0;
}
pr_info("dmatest: Started %u threads using %s\n",

17
drivers/dma/fsldma.c
View file

@ -12,6 +12,11 @@
* also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
* The support for MPC8349 DMA contorller is also added.
*
* This driver instructs the DMA controller to issue the PCI Read Multiple
* command for PCI read operations, instead of using the default PCI Read Line
* command. Please be aware that this setting may result in read pre-fetching
* on some platforms.
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan)
case FSL_DMA_IP_83XX:
/* Set the channel to below modes:
* EOTIE - End-of-transfer interrupt enable
* PRC_RM - PCI read multiple
*/
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
32);
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
| FSL_DMA_MR_PRC_RM, 32);
break;
}
@ -136,15 +142,16 @@ static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
static void dma_start(struct fsl_dma_chan *fsl_chan)
{
u32 mr_set = 0;;
u32 mr_set = 0;
if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
mr_set |= FSL_DMA_MR_EMP_EN;
} else
} else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
& ~FSL_DMA_MR_EMP_EN, 32);
}
if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
mr_set |= FSL_DMA_MR_EMS_EN;
@ -871,9 +878,9 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
case FSL_DMA_IP_85XX:
new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
case FSL_DMA_IP_83XX:
new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
}

1
drivers/dma/fsldma.h
View file

@ -38,6 +38,7 @@
/* Special MR definition for MPC8349 */
#define FSL_DMA_MR_EOTIE 0x00000080
#define FSL_DMA_MR_PRC_RM 0x00000800
#define FSL_DMA_SR_CH 0x00000020
#define FSL_DMA_SR_PE 0x00000010

2
drivers/dma/mv_xor.c
View file

@ -1176,7 +1176,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev)
if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
dma_dev->max_xor = 8; ;
dma_dev->max_xor = 8;
dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
}