mirror of
https://github.com/adulau/aha.git
synced 2024-12-27 19:26:25 +00:00
Add ds2782 battery gas gauge driver
This patch adds a driver for ds2782 battery devices. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
This commit is contained in:
Ryan Mallon
Anton Vorontsov
parent
8f7e57985f
commit
bfdb46ce84
3 changed files with 338 additions and 0 deletions
|
|
@ -43,6 +43,13 @@ config BATTERY_DS2760
|
|||
help
|
||||
Say Y here to enable support for batteries with ds2760 chip.
|
||||
|
||||
config BATTERY_DS2782
|
||||
tristate "DS2782 standalone gas-gauge"
|
||||
depends on I2C
|
||||
help
|
||||
Say Y here to enable support for the DS2782 standalone battery
|
||||
gas-gauge.
|
||||
|
||||
config BATTERY_PMU
|
||||
tristate "Apple PMU battery"
|
||||
depends on PPC32 && ADB_PMU
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER) += apm_power.o
|
|||
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
|
||||
|
||||
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
|
||||
obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
|
||||
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
|
||||
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
|
||||
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
|
||||
|
|
|
|||
330
drivers/power/ds2782_battery.c
Normal file
330
drivers/power/ds2782_battery.c
Normal file
|
|
@ -0,0 +1,330 @@
|
|||
/*
|
||||
* I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
|
||||
*
|
||||
* Copyright (C) 2009 Bluewater Systems Ltd
|
||||
*
|
||||
* Author: Ryan Mallon <ryan@bluewatersys.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/swab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/idr.h>
|
||||
#include <linux/power_supply.h>
|
||||
|
||||
#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
|
||||
|
||||
#define DS2782_REG_VOLT_MSB 0x0c
|
||||
#define DS2782_REG_TEMP_MSB 0x0a
|
||||
#define DS2782_REG_CURRENT_MSB 0x0e
|
||||
|
||||
/* EEPROM Block */
|
||||
#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */
|
||||
|
||||
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
|
||||
#define DS2782_CURRENT_UNITS 1563
|
||||
|
||||
#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
|
||||
|
||||
struct ds2782_info {
|
||||
struct i2c_client *client;
|
||||
struct power_supply battery;
|
||||
int id;
|
||||
};
|
||||
|
||||
static DEFINE_IDR(battery_id);
|
||||
static DEFINE_MUTEX(battery_lock);
|
||||
|
||||
static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(info->client, reg);
|
||||
if (ret < 0) {
|
||||
dev_err(&info->client->dev, "register read failed\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
*val = ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
|
||||
s16 *val)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
|
||||
if (ret < 0) {
|
||||
dev_err(&info->client->dev, "register read failed\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
*val = ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ds2782_get_temp(struct ds2782_info *info, int *temp)
|
||||
{
|
||||
s16 raw;
|
||||
int err;
|
||||
|
||||
/*
|
||||
* Temperature is measured in units of 0.125 degrees celcius, the
|
||||
* power_supply class measures temperature in tenths of degrees
|
||||
* celsius. The temperature value is stored as a 10 bit number, plus
|
||||
* sign in the upper bits of a 16 bit register.
|
||||
*/
|
||||
err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
|
||||
if (err)
|
||||
return err;
|
||||
*temp = ((raw / 32) * 125) / 100;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
|
||||
{
|
||||
int sense_res;
|
||||
int err;
|
||||
u8 sense_res_raw;
|
||||
s16 raw;
|
||||
|
||||
/*
|
||||
* The units of measurement for current are dependent on the value of
|
||||
* the sense resistor.
|
||||
*/
|
||||
err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
|
||||
if (err)
|
||||
return err;
|
||||
if (sense_res_raw == 0) {
|
||||
dev_err(&info->client->dev, "sense resistor value is 0\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
sense_res = 1000 / sense_res_raw;
|
||||
|
||||
dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
|
||||
sense_res);
|
||||
err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
|
||||
if (err)
|
||||
return err;
|
||||
*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
|
||||
{
|
||||
s16 raw;
|
||||
int err;
|
||||
|
||||
/*
|
||||
* Voltage is measured in units of 4.88mV. The voltage is stored as
|
||||
* a 10-bit number plus sign, in the upper bits of a 16-bit register
|
||||
*/
|
||||
err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
|
||||
if (err)
|
||||
return err;
|
||||
*voltage_uA = (raw / 32) * 4800;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
|
||||
{
|
||||
int err;
|
||||
u8 raw;
|
||||
|
||||
err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
|
||||
if (err)
|
||||
return err;
|
||||
*capacity = raw;
|
||||
return raw;
|
||||
}
|
||||
|
||||
static int ds2782_get_status(struct ds2782_info *info, int *status)
|
||||
{
|
||||
int err;
|
||||
int current_uA;
|
||||
int capacity;
|
||||
|
||||
err = ds2782_get_current(info, ¤t_uA);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = ds2782_get_capacity(info, &capacity);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (capacity == 100)
|
||||
*status = POWER_SUPPLY_STATUS_FULL;
|
||||
else if (current_uA == 0)
|
||||
*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
||||
else if (current_uA < 0)
|
||||
*status = POWER_SUPPLY_STATUS_DISCHARGING;
|
||||
else
|
||||
*status = POWER_SUPPLY_STATUS_CHARGING;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ds2782_battery_get_property(struct power_supply *psy,
|
||||
enum power_supply_property prop,
|
||||
union power_supply_propval *val)
|
||||
{
|
||||
struct ds2782_info *info = to_ds2782_info(psy);
|
||||
int ret;
|
||||
|
||||
switch (prop) {
|
||||
case POWER_SUPPLY_PROP_STATUS:
|
||||
ret = ds2782_get_status(info, &val->intval);
|
||||
break;
|
||||
|
||||
case POWER_SUPPLY_PROP_CAPACITY:
|
||||
ret = ds2782_get_capacity(info, &val->intval);
|
||||
break;
|
||||
|
||||
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
||||
ret = ds2782_get_voltage(info, &val->intval);
|
||||
break;
|
||||
|
||||
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
||||
ret = ds2782_get_current(info, &val->intval);
|
||||
break;
|
||||
|
||||
case POWER_SUPPLY_PROP_TEMP:
|
||||
ret = ds2782_get_temp(info, &val->intval);
|
||||
break;
|
||||
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static enum power_supply_property ds2782_battery_props[] = {
|
||||
POWER_SUPPLY_PROP_STATUS,
|
||||
POWER_SUPPLY_PROP_CAPACITY,
|
||||
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
||||
POWER_SUPPLY_PROP_CURRENT_NOW,
|
||||
POWER_SUPPLY_PROP_TEMP,
|
||||
};
|
||||
|
||||
static void ds2782_power_supply_init(struct power_supply *battery)
|
||||
{
|
||||
battery->type = POWER_SUPPLY_TYPE_BATTERY;
|
||||
battery->properties = ds2782_battery_props;
|
||||
battery->num_properties = ARRAY_SIZE(ds2782_battery_props);
|
||||
battery->get_property = ds2782_battery_get_property;
|
||||
battery->external_power_changed = NULL;
|
||||
}
|
||||
|
||||
static int ds2782_battery_remove(struct i2c_client *client)
|
||||
{
|
||||
struct ds2782_info *info = i2c_get_clientdata(client);
|
||||
|
||||
power_supply_unregister(&info->battery);
|
||||
kfree(info->battery.name);
|
||||
|
||||
mutex_lock(&battery_lock);
|
||||
idr_remove(&battery_id, info->id);
|
||||
mutex_unlock(&battery_lock);
|
||||
|
||||
i2c_set_clientdata(client, info);
|
||||
|
||||
kfree(info);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ds2782_battery_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct ds2782_info *info;
|
||||
int ret;
|
||||
int num;
|
||||
|
||||
/* Get an ID for this battery */
|
||||
ret = idr_pre_get(&battery_id, GFP_KERNEL);
|
||||
if (ret == 0) {
|
||||
ret = -ENOMEM;
|
||||
goto fail_id;
|
||||
}
|
||||
|
||||
mutex_lock(&battery_lock);
|
||||
ret = idr_get_new(&battery_id, client, &num);
|
||||
mutex_unlock(&battery_lock);
|
||||
if (ret < 0)
|
||||
goto fail_id;
|
||||
|
||||
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
||||
if (!info) {
|
||||
ret = -ENOMEM;
|
||||
goto fail_info;
|
||||
}
|
||||
|
||||
info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
|
||||
if (!info->battery.name) {
|
||||
ret = -ENOMEM;
|
||||
goto fail_name;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, info);
|
||||
info->client = client;
|
||||
ds2782_power_supply_init(&info->battery);
|
||||
|
||||
ret = power_supply_register(&client->dev, &info->battery);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "failed to register battery\n");
|
||||
goto fail_register;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
fail_register:
|
||||
kfree(info->battery.name);
|
||||
fail_name:
|
||||
i2c_set_clientdata(client, info);
|
||||
kfree(info);
|
||||
fail_info:
|
||||
mutex_lock(&battery_lock);
|
||||
idr_remove(&battery_id, num);
|
||||
mutex_unlock(&battery_lock);
|
||||
fail_id:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ds2782_id[] = {
|
||||
{"ds2782", 0},
|
||||
{},
|
||||
};
|
||||
|
||||
static struct i2c_driver ds2782_battery_driver = {
|
||||
.driver = {
|
||||
.name = "ds2782-battery",
|
||||
},
|
||||
.probe = ds2782_battery_probe,
|
||||
.remove = ds2782_battery_remove,
|
||||
.id_table = ds2782_id,
|
||||
};
|
||||
|
||||
static int __init ds2782_init(void)
|
||||
{
|
||||
return i2c_add_driver(&ds2782_battery_driver);
|
||||
}
|
||||
module_init(ds2782_init);
|
||||
|
||||
static void __exit ds2782_exit(void)
|
||||
{
|
||||
i2c_del_driver(&ds2782_battery_driver);
|
||||
}
|
||||
module_exit(ds2782_exit);
|
||||
|
||||
MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
|
||||
MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in a new issue