From 21bc1f024d0d4ea43fc0f2a43504e759261c7b18 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:16 +0000 Subject: [PATCH 1/4] sh: skip disabled LCDC channels This patch updates the SuperH Mobile LCDC driver to skip over disabled channels. Without this patch suspend-to-ram operation will crash if deferred io is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/video/sh_mobile_lcdcfb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 8f24564f77b..07f22b62563 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -481,6 +481,9 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* tell the board code to enable the panel */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { ch = &priv->ch[k]; + if (!ch->enabled) + continue; + board_cfg = &ch->cfg.board_cfg; if (board_cfg->display_on) board_cfg->display_on(board_cfg->board_data); @@ -498,6 +501,8 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) /* clean up deferred io and ask board code to disable panel */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { ch = &priv->ch[k]; + if (!ch->enabled) + continue; /* deferred io mode: * flush frame, and wait for frame end interrupt From f6431732f128a241b149c0aa85dfec852455ebf9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:25 +0000 Subject: [PATCH 2/4] sh: CMT suspend/resume This patch updates the SuperH CMT driver with suspend and resume callbacks for the suspend-to-ram case. This patch stops the CMT channel at suspend time to avoid unwanted wake up events. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 2964f5f4a7e..6b3e0c2f33e 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -40,6 +40,7 @@ struct sh_cmt_priv { struct platform_device *pdev; unsigned long flags; + unsigned long flags_suspend; unsigned long match_value; unsigned long next_match_value; unsigned long max_match_value; @@ -667,11 +668,38 @@ static int __devexit sh_cmt_remove(struct platform_device *pdev) return -EBUSY; /* cannot unregister clockevent and clocksource */ } +static int sh_cmt_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sh_cmt_priv *p = platform_get_drvdata(pdev); + + /* save flag state and stop CMT channel */ + p->flags_suspend = p->flags; + sh_cmt_stop(p, p->flags); + return 0; +} + +static int sh_cmt_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sh_cmt_priv *p = platform_get_drvdata(pdev); + + /* start CMT channel from saved state */ + sh_cmt_start(p, p->flags_suspend); + return 0; +} + +static struct dev_pm_ops sh_cmt_dev_pm_ops = { + .suspend = sh_cmt_suspend, + .resume = sh_cmt_resume, +}; + static struct platform_driver sh_cmt_device_driver = { .probe = sh_cmt_probe, .remove = __devexit_p(sh_cmt_remove), .driver = { .name = "sh_cmt", + .pm = &sh_cmt_dev_pm_ops, } }; From 9747e78b304b44d6fb73e2c8071406d55aa8bb75 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:34 +0000 Subject: [PATCH 3/4] sh: use in-soc KEYSC on se7724 This patch updates the Solution Engine 7724 board code to use in-SoC KEYSC resources for the keyboard platform device. Using the in-SoC key scan controller fixes a crash-during-resume issue. Without this patch the KEYSC hardware block located in the board specific FPGA is used together with an external IRQ which is routed through the FPGA and handled by some board specific demux code. This board specific FPGA interrupt code does not implement desc->set_wake() so the enable_irq_wake() call in the sh_keysc driver will fail at suspend-to-ram time and the disable_irq_wake() will bomb out when resuming. Changing the platform data to use the in-SoC KEYSC hardware makes the se7724 board support code less special which is a good thing. Also, the board specific KEYSC pin setup code selects in-SoC pin functions already which makes the current FPGA platform device data look like a typo. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 8fed45a2fb8..15456a0773b 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -238,7 +238,7 @@ static struct platform_device ceu1_device = { }, }; -/* KEYSC */ +/* KEYSC in SoC (Needs SW33-2 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, .scan_timing = 10, @@ -255,12 +255,13 @@ static struct sh_keysc_info keysc_info = { static struct resource keysc_resources[] = { [0] = { - .start = 0x1a204000, - .end = 0x1a20400f, + .name = "KEYSC", + .start = 0x044b0000, + .end = 0x044b000f, .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ0_KEY, + .start = 79, .flags = IORESOURCE_IRQ, }, }; From 237674e050ae8ea40a432412df6c15d60b7ae8a6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:42 +0000 Subject: [PATCH 4/4] sh: sh7724 ddr self-refresh changes This patch updates the SuperH Mobile sleep assembly code with support for DBSC memory controller found in the sh7724 processor. Without this fix the memory hooked up to the sh7724 processor will never enter self-refresh mode before suspending to ram. The effect of this is that the memory contents most likeley will be lost upon resume which may or may not be what you want. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/shmobile/sleep.S | 70 ++++++++++++++++++++++++++++- 1 file changed, 68 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S index 5d888ef53d8..baf2d7d46b0 100644 --- a/arch/sh/kernel/cpu/shmobile/sleep.S +++ b/arch/sh/kernel/cpu/shmobile/sleep.S @@ -26,8 +26,30 @@ ENTRY(sh_mobile_standby) tst #SUSP_SH_SF, r0 bt skip_set_sf +#ifdef CONFIG_CPU_SUBTYPE_SH7724 + /* DBSC: put memory in self-refresh mode */ - /* SDRAM: disable power down and put in self-refresh mode */ + mov.l dben_reg, r4 + mov.l dben_data0, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data1, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data1, r1 + mov.l r1, @r4 +#else + /* SBSC: disable power down and put in self-refresh mode */ mov.l 1f, r4 mov.l 2f, r1 mov.l @r4, r2 @@ -35,6 +57,7 @@ ENTRY(sh_mobile_standby) mov.l 3f, r3 and r3, r2 mov.l r2, @r4 +#endif skip_set_sf: tst #SUSP_SH_SLEEP, r0 @@ -84,7 +107,36 @@ done_sleep: tst #SUSP_SH_SF, r0 bt skip_restore_sf - /* SDRAM: set auto-refresh mode */ +#ifdef CONFIG_CPU_SUBTYPE_SH7724 + /* DBSC: put memory in auto-refresh mode */ + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data0, r1 + mov.l r1, @r4 + + /* sleep 140 ns */ + nop + nop + nop + nop + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data1, r1 + mov.l r1, @r4 + + mov.l dben_reg, r4 + mov.l dben_data1, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data2, r1 + mov.l r1, @r4 +#else + /* SBSC: set auto-refresh mode */ mov.l 1f, r4 mov.l @r4, r2 mov.l 4f, r3 @@ -98,15 +150,29 @@ done_sleep: add r4, r3 or r2, r3 mov.l r3, @r1 +#endif skip_restore_sf: rts nop .balign 4 +#ifdef CONFIG_CPU_SUBTYPE_SH7724 +dben_reg: .long 0xfd000010 /* DBEN */ +dben_data0: .long 0 +dben_data1: .long 1 +dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */ +dbrfpdn0_data0: .long 0 +dbrfpdn0_data1: .long 1 +dbrfpdn0_data2: .long 0x00010000 +dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */ +dbcmdcnt_data0: .long 2 +dbcmdcnt_data1: .long 4 +#else 1: .long 0xfe400008 /* SDCR0 */ 2: .long 0x00000400 3: .long 0xffff7fff 4: .long 0xfffffbff +#endif 5: .long 0xa4150020 /* STBCR */ 6: .long 0xfe40001c /* RTCOR */ 7: .long 0xfe400018 /* RTCNT */