From e069c0cf7c169ae5a8bfdc8d083a5d66fbef73d8 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 15:51:44 -0700 Subject: [PATCH 01/26] wimax/i2400m: usb: fix device reset on autosuspend while not yet idle When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is rejected (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/usb.c | 35 +++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index ca4151a9e22..17851321b7f 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -505,27 +505,52 @@ int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg) #ifdef CONFIG_PM struct usb_device *usb_dev = i2400mu->usb_dev; #endif + unsigned is_autosuspend = 0; struct i2400m *i2400m = &i2400mu->i2400m; +#ifdef CONFIG_PM + if (usb_dev->auto_pm > 0) + is_autosuspend = 1; +#endif + d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event); if (i2400m->updown == 0) goto no_firmware; - d_printf(1, dev, "fw up, requesting standby\n"); + if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) { + /* ugh -- the device is connected and this suspend + * request is an autosuspend one (not a system standby + * / hibernate). + * + * The only way the device can go to standby is if the + * link with the base station is in IDLE mode; that + * were the case, we'd be in status + * I2400M_SS_CONNECTED_IDLE. But we are not. + * + * If we *tell* him to go power save now, it'll reset + * as a precautionary measure, so if this is an + * autosuspend thing, say no and it'll come back + * later, when the link is IDLE + */ + result = -EBADF; + d_printf(1, dev, "fw up, link up, not-idle, autosuspend: " + "not entering powersave\n"); + goto error_not_now; + } + d_printf(1, dev, "fw up: entering powersave\n"); atomic_dec(&i2400mu->do_autopm); result = i2400m_cmd_enter_powersave(i2400m); atomic_inc(&i2400mu->do_autopm); -#ifdef CONFIG_PM - if (result < 0 && usb_dev->auto_pm == 0) { + if (result < 0 && !is_autosuspend) { /* System suspend, can't fail */ dev_err(dev, "failed to suspend, will reset on resume\n"); result = 0; } -#endif if (result < 0) goto error_enter_powersave; i2400mu_notification_release(i2400mu); - d_printf(1, dev, "fw up, got standby\n"); + d_printf(1, dev, "powersave requested\n"); error_enter_powersave: +error_not_now: no_firmware: d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n", iface, pm_msg.event, result); From bfcaa50270e18f35220a11d46e98fc6232c24606 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 25 May 2009 17:23:15 +0200 Subject: [PATCH 02/26] netfilter: nf_ct_tcp: fix accepting invalid RST segments Robert L Mathews discovered that some clients send evil TCP RST segments, which are accepted by netfilter conntrack but discarded by the destination. Thus the conntrack entry is destroyed but the destination retransmits data until timeout. The same technique, i.e. sending properly crafted RST segments, can easily be used to bypass connlimit/connbytes based restrictions (the sample script written by Robert can be found in the netfilter mailing list archives). The patch below adds a new flag and new field to struct ip_ct_tcp_state so that checking RST segments can be made more strict and thus TCP conntrack can catch the invalid ones: the RST segment is accepted only if its sequence number higher than or equal to the highest ack we seen from the other direction. (The last_ack field cannot be reused because it is used to catch resent packets.) Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy --- include/linux/netfilter/nf_conntrack_tcp.h | 4 ++++ net/netfilter/nf_conntrack_proto_tcp.c | 18 ++++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index 3066789b972..b2f384d4261 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -35,6 +35,9 @@ enum tcp_conntrack { /* Has unacknowledged data */ #define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED 0x10 +/* The field td_maxack has been set */ +#define IP_CT_TCP_FLAG_MAXACK_SET 0x20 + struct nf_ct_tcp_flags { __u8 flags; __u8 mask; @@ -46,6 +49,7 @@ struct ip_ct_tcp_state { u_int32_t td_end; /* max of seq + len */ u_int32_t td_maxend; /* max of ack + max(win, 1) */ u_int32_t td_maxwin; /* max(win) */ + u_int32_t td_maxack; /* max of ack */ u_int8_t td_scale; /* window scale factor */ u_int8_t flags; /* per direction options */ }; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index b5ccf2b4b2e..97a6e93d742 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -634,6 +634,14 @@ static bool tcp_in_window(const struct nf_conn *ct, sender->td_end = end; sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED; } + if (tcph->ack) { + if (!(sender->flags & IP_CT_TCP_FLAG_MAXACK_SET)) { + sender->td_maxack = ack; + sender->flags |= IP_CT_TCP_FLAG_MAXACK_SET; + } else if (after(ack, sender->td_maxack)) + sender->td_maxack = ack; + } + /* * Update receiver data. */ @@ -918,6 +926,16 @@ static int tcp_packet(struct nf_conn *ct, "nf_ct_tcp: invalid state "); return -NF_ACCEPT; case TCP_CONNTRACK_CLOSE: + if (index == TCP_RST_SET + && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET) + && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) { + /* Invalid RST */ + write_unlock_bh(&tcp_lock); + if (LOG_INVALID(net, IPPROTO_TCP)) + nf_log_packet(pf, 0, skb, NULL, NULL, NULL, + "nf_ct_tcp: invalid RST "); + return -NF_ACCEPT; + } if (index == TCP_RST_SET && ((test_bit(IPS_SEEN_REPLY_BIT, &ct->status) && ct->proto.tcp.last_index == TCP_SYN_SET) From b38b1f616867c832301f24eaf259889494d495b3 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 25 May 2009 17:29:43 +0200 Subject: [PATCH 03/26] netfilter: nf_ct_dccp: add missing DCCP protocol changes in event cache This patch adds the missing protocol state-change event reporting for DCCP. $ sudo conntrack -E [NEW] dccp 33 240 src=192.168.0.2 dst=192.168.1.2 sport=57040 dport=5001 [UNREPLIED] src=192.168.1.2 dst=192.168.1.100 sport=5001 dport=57040 With this patch: $ sudo conntrack -E [NEW] dccp 33 240 REQUEST src=192.168.0.2 dst=192.168.1.2 sport=57040 dport=5001 [UNREPLIED] src=192.168.1.2 dst=192.168.1.100 sport=5001 dport=57040 Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_proto_dccp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c index 8e757dd5339..aee0d6bea30 100644 --- a/net/netfilter/nf_conntrack_proto_dccp.c +++ b/net/netfilter/nf_conntrack_proto_dccp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include static DEFINE_RWLOCK(dccp_lock); @@ -553,6 +554,9 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb, ct->proto.dccp.state = new_state; write_unlock_bh(&dccp_lock); + if (new_state != old_state) + nf_conntrack_event_cache(IPCT_PROTOINFO, ct); + dn = dccp_pernet(net); nf_ct_refresh_acct(ct, ctinfo, skb, dn->dccp_timeout[new_state]); From 217cbfa856dc1cbc2890781626c4032d9e3ec59f Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 25 May 2009 22:43:49 -0700 Subject: [PATCH 04/26] mac8390: fix regression caused during net_device_ops conversion Changeset ca17584bf2ad1b1e37a5c0e4386728cc5fc9dabc ("mac8390: update to net_device_ops") broke mac8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in mac8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. They seem to be of no value since COMPAT_NET_DEV_OPS is going away soon. Tested with a Kinetics EtherPort card. Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/Makefile | 2 +- drivers/net/mac8390.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1fc4602a6ff..a1c25cb4669 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -102,7 +102,7 @@ obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o -obj-$(CONFIG_MAC8390) += mac8390.o 8390.o +obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_HP100) += hp100.o diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index 8e884869a05..f26667d5eaa 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -304,7 +304,7 @@ struct net_device * __init mac8390_probe(int unit) if (!MACH_IS_MAC) return ERR_PTR(-ENODEV); - dev = alloc_ei_netdev(); + dev = ____alloc_ei_netdev(0); if (!dev) return ERR_PTR(-ENOMEM); @@ -481,10 +481,10 @@ void cleanup_module(void) static const struct net_device_ops mac8390_netdev_ops = { .ndo_open = mac8390_open, .ndo_stop = mac8390_close, - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_multicast_list = ei_set_multicast_list, + .ndo_start_xmit = __ei_start_xmit, + .ndo_tx_timeout = __ei_tx_timeout, + .ndo_get_stats = __ei_get_stats, + .ndo_set_multicast_list = __ei_set_multicast_list, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, From c80a5cdfc5ca6533cb893154f546370da1fdb8f0 Mon Sep 17 00:00:00 2001 From: Doug Leith Date: Mon, 25 May 2009 22:44:59 -0700 Subject: [PATCH 05/26] tcp: tcp_vegas ssthresh bugfix This patch fixes ssthresh accounting issues in tcp_vegas when cwnd decreases Signed-off-by: Doug Leith Signed-off-by: David S. Miller --- net/ipv4/tcp_vegas.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c index a453aac91bd..c6743eec9b7 100644 --- a/net/ipv4/tcp_vegas.c +++ b/net/ipv4/tcp_vegas.c @@ -158,6 +158,11 @@ void tcp_vegas_cwnd_event(struct sock *sk, enum tcp_ca_event event) } EXPORT_SYMBOL_GPL(tcp_vegas_cwnd_event); +static inline u32 tcp_vegas_ssthresh(struct tcp_sock *tp) +{ + return min(tp->snd_ssthresh, tp->snd_cwnd-1); +} + static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) { struct tcp_sock *tp = tcp_sk(sk); @@ -221,11 +226,10 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) */ diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT; - if (diff > gamma && tp->snd_ssthresh > 2 ) { + if (diff > gamma && tp->snd_cwnd <= tp->snd_ssthresh) { /* Going too fast. Time to slow down * and switch to congestion avoidance. */ - tp->snd_ssthresh = 2; /* Set cwnd to match the actual rate * exactly: @@ -235,6 +239,7 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) * utilization. */ tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1); + tp->snd_ssthresh = tcp_vegas_ssthresh(tp); } else if (tp->snd_cwnd <= tp->snd_ssthresh) { /* Slow start. */ @@ -250,6 +255,8 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) * we slow down. */ tp->snd_cwnd--; + tp->snd_ssthresh + = tcp_vegas_ssthresh(tp); } else if (diff < alpha) { /* We don't have enough extra packets * in the network, so speed up. From f11a377b3f4e897d11f0e8d1fc688667e2f19708 Mon Sep 17 00:00:00 2001 From: David Dillow Date: Fri, 22 May 2009 15:29:34 +0000 Subject: [PATCH 06/26] r8169: avoid losing MSI interrupts The 8169 chip only generates MSI interrupts when all enabled event sources are quiescent and one or more sources transition to active. If not all of the active events are acknowledged, or a new event becomes active while the existing ones are cleared in the handler, we will not see a new interrupt. The current interrupt handler masks off the Rx and Tx events once the NAPI handler has been scheduled, which opens a race window in which we can get another Rx or Tx event and never ACK'ing it, stopping all activity until the link is reset (ifconfig down/up). Fix this by always ACK'ing all event sources, and loop in the handler until we have all sources quiescent. Signed-off-by: David Dillow Tested-by: Michael Buesch Signed-off-by: David S. Miller --- drivers/net/r8169.c | 112 ++++++++++++++++++++++++-------------------- 1 file changed, 62 insertions(+), 50 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 0b6e8c89683..8247a945a1d 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3554,54 +3554,64 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) int handled = 0; int status; + /* loop handling interrupts until we have no new ones or + * we hit a invalid/hotplug case. + */ status = RTL_R16(IntrStatus); + while (status && status != 0xffff) { + handled = 1; - /* hotplug/major error/no more work/shared irq */ - if ((status == 0xffff) || !status) - goto out; - - handled = 1; - - if (unlikely(!netif_running(dev))) { - rtl8169_asic_down(ioaddr); - goto out; - } - - status &= tp->intr_mask; - RTL_W16(IntrStatus, - (status & RxFIFOOver) ? (status | RxOverflow) : status); - - if (!(status & tp->intr_event)) - goto out; - - /* Work around for rx fifo overflow */ - if (unlikely(status & RxFIFOOver) && - (tp->mac_version == RTL_GIGA_MAC_VER_11)) { - netif_stop_queue(dev); - rtl8169_tx_timeout(dev); - goto out; - } - - if (unlikely(status & SYSErr)) { - rtl8169_pcierr_interrupt(dev); - goto out; - } - - if (status & LinkChg) - rtl8169_check_link_status(dev, tp, ioaddr); - - if (status & tp->napi_event) { - RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); - tp->intr_mask = ~tp->napi_event; - - if (likely(napi_schedule_prep(&tp->napi))) - __napi_schedule(&tp->napi); - else if (netif_msg_intr(tp)) { - printk(KERN_INFO "%s: interrupt %04x in poll\n", - dev->name, status); + /* Handle all of the error cases first. These will reset + * the chip, so just exit the loop. + */ + if (unlikely(!netif_running(dev))) { + rtl8169_asic_down(ioaddr); + break; } + + /* Work around for rx fifo overflow */ + if (unlikely(status & RxFIFOOver) && + (tp->mac_version == RTL_GIGA_MAC_VER_11)) { + netif_stop_queue(dev); + rtl8169_tx_timeout(dev); + break; + } + + if (unlikely(status & SYSErr)) { + rtl8169_pcierr_interrupt(dev); + break; + } + + if (status & LinkChg) + rtl8169_check_link_status(dev, tp, ioaddr); + + /* We need to see the lastest version of tp->intr_mask to + * avoid ignoring an MSI interrupt and having to wait for + * another event which may never come. + */ + smp_rmb(); + if (status & tp->intr_mask & tp->napi_event) { + RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); + tp->intr_mask = ~tp->napi_event; + + if (likely(napi_schedule_prep(&tp->napi))) + __napi_schedule(&tp->napi); + else if (netif_msg_intr(tp)) { + printk(KERN_INFO "%s: interrupt %04x in poll\n", + dev->name, status); + } + } + + /* We only get a new MSI interrupt when all active irq + * sources on the chip have been acknowledged. So, ack + * everything we've seen and check if new sources have become + * active to avoid blocking all interrupts from the chip. + */ + RTL_W16(IntrStatus, + (status & RxFIFOOver) ? (status | RxOverflow) : status); + status = RTL_R16(IntrStatus); } -out: + return IRQ_RETVAL(handled); } @@ -3617,13 +3627,15 @@ static int rtl8169_poll(struct napi_struct *napi, int budget) if (work_done < budget) { napi_complete(napi); - tp->intr_mask = 0xffff; - /* - * 20040426: the barrier is not strictly required but the - * behavior of the irq handler could be less predictable - * without it. Btw, the lack of flush for the posted pci - * write is safe - FR + + /* We need for force the visibility of tp->intr_mask + * for other CPUs, as we can loose an MSI interrupt + * and potentially wait for a retransmit timeout if we don't. + * The posted write to IntrMask is safe, as it will + * eventually make it to the chip and we won't loose anything + * until it does. */ + tp->intr_mask = 0xffff; smp_wmb(); RTL_W16(IntrMask, tp->intr_event); } From e65fcfd63a9a62baa5708484ff8edbe56eb3e7ec Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Tue, 26 May 2009 20:47:02 -0700 Subject: [PATCH 07/26] cls_cgroup: read classid atomically in classifier Avoid reading the unsynchronized value cs->classid multiple times, since it could change concurrently from non-zero to zero; this would result in the classifier returning a positive result with a bogus (zero) classid. Signed-off-by: Paul Menage Reviewed-by: Li Zefan Signed-off-by: David S. Miller --- net/sched/cls_cgroup.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/net/sched/cls_cgroup.c b/net/sched/cls_cgroup.c index 91a3db4a76f..cc29b44b150 100644 --- a/net/sched/cls_cgroup.c +++ b/net/sched/cls_cgroup.c @@ -104,8 +104,7 @@ static int cls_cgroup_classify(struct sk_buff *skb, struct tcf_proto *tp, struct tcf_result *res) { struct cls_cgroup_head *head = tp->root; - struct cgroup_cls_state *cs; - int ret = 0; + u32 classid; /* * Due to the nature of the classifier it is required to ignore all @@ -121,17 +120,18 @@ static int cls_cgroup_classify(struct sk_buff *skb, struct tcf_proto *tp, return -1; rcu_read_lock(); - cs = task_cls_state(current); - if (cs->classid && tcf_em_tree_match(skb, &head->ematches, NULL)) { - res->classid = cs->classid; - res->class = 0; - ret = tcf_exts_exec(skb, &head->exts, res); - } else - ret = -1; - + classid = task_cls_state(current)->classid; rcu_read_unlock(); - return ret; + if (!classid) + return -1; + + if (!tcf_em_tree_match(skb, &head->ematches, NULL)) + return -1; + + res->classid = classid; + res->class = 0; + return tcf_exts_exec(skb, &head->exts, res); } static unsigned long cls_cgroup_get(struct tcf_proto *tp, u32 handle) From 18a36c1a398055e87a3646738abf3c1b0e98e7e2 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 26 May 2009 20:48:04 -0700 Subject: [PATCH 08/26] gianfar: fix babbling rx error event bug Gianfar interrupt handler uses IEVENT_ERR_MASK to check and handle errors. Babbling RX error (IEVENT_BABR) should be included in IEVENT_ERROR_MASK. Otherwise if BABR is raised, it never gets handled nor cleared, and an interrupt storm results. This has been observed to happen on sending a burst of ethernet frames to a gianfar based board. Signed-off-by: Xiaotian Feng Signed-off-by: David S. Miller --- drivers/net/gianfar.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 0642d52aef5..cf352961ae9 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -259,7 +259,7 @@ extern const char gfar_driver_version[]; (IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \ IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \ | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \ - | IEVENT_MAG) + | IEVENT_MAG | IEVENT_BABR) #define IMASK_INIT_CLEAR 0x00000000 #define IMASK_BABR 0x80000000 From 5ad18900355743757e7f415bcb850ea8406a13e2 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 26 May 2009 20:50:12 -0700 Subject: [PATCH 09/26] atlx: move modinfo data from atlx.h to atl1.c Both atl1.c and atl2.c include atlx.h, which defines some modinfo stuff. But atl2.c seems like it doesn't want the modinfo data from atlx.h, as it defines its own. Running modinfo on atl2.ko, we get conflicting information: $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation , Chris Snook version: 2.1.3 author: Xiong Huang , Chris Snook , Jay Cliburn Move the modinfo data out of atlx.h and into atl1.c to eliminate the confusion: $ /sbin/modinfo drivers/net/atlx/atl1.ko | egrep "version|description|author" version: 2.1.3 author: Xiong Huang , Chris Snook , Jay Cliburn description: Atheros L1 Gigabit Ethernet Driver $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation , Chris Snook Reported-by: Scott Scriven Signed-off-by: Alex Chiang Acked-by: Jay Cliburn Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 6 ++++++ drivers/net/atlx/atlx.h | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 0ab22540bf5..4e817126e28 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -82,6 +82,12 @@ #include "atl1.h" +#define ATLX_DRIVER_VERSION "2.1.3" +MODULE_AUTHOR("Xiong Huang , \ + Chris Snook , Jay Cliburn "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ATLX_DRIVER_VERSION); + /* Temporary hack for merging atl1 and atl2 */ #include "atlx.c" diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h index 297a03da6b7..14054b75aa6 100644 --- a/drivers/net/atlx/atlx.h +++ b/drivers/net/atlx/atlx.h @@ -29,12 +29,6 @@ #include #include -#define ATLX_DRIVER_VERSION "2.1.3" -MODULE_AUTHOR("Xiong Huang , \ - Chris Snook , Jay Cliburn "); -MODULE_LICENSE("GPL"); -MODULE_VERSION(ATLX_DRIVER_VERSION); - #define ATLX_ERR_PHY 2 #define ATLX_ERR_PHY_SPEED 7 #define ATLX_ERR_PHY_RES 8 From b63dc8fef7ca5c51d163295d824e78c770d48ccf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 20:55:33 -0700 Subject: [PATCH 10/26] bfin_mac: fix build error due to net_device_ops convert MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The previous commit "convert to net_device_ops" broke the Blackfin MAC driver as it declared the new structure before the function it used: CC drivers/net/bfin_mac.o drivers/net/bfin_mac.c:984: error: ‘bfin_mac_close’ undeclared here (not in a function) make[1]: *** [drivers/net/bfin_mac.o] Error 1 Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 9f971ed6b58..b4da1821332 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -979,22 +979,7 @@ static int bfin_mac_open(struct net_device *dev) return 0; } -static const struct net_device_ops bfin_mac_netdev_ops = { - .ndo_open = bfin_mac_open, - .ndo_stop = bfin_mac_close, - .ndo_start_xmit = bfin_mac_hard_start_xmit, - .ndo_set_mac_address = bfin_mac_set_mac_address, - .ndo_tx_timeout = bfin_mac_timeout, - .ndo_set_multicast_list = bfin_mac_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = bfin_mac_poll, -#endif -}; - /* - * * this makes the board clean up everything that it can * and not talk to the outside world. Caused by * an 'ifconfig ethX down' @@ -1019,6 +1004,20 @@ static int bfin_mac_close(struct net_device *dev) return 0; } +static const struct net_device_ops bfin_mac_netdev_ops = { + .ndo_open = bfin_mac_open, + .ndo_stop = bfin_mac_close, + .ndo_start_xmit = bfin_mac_hard_start_xmit, + .ndo_set_mac_address = bfin_mac_set_mac_address, + .ndo_tx_timeout = bfin_mac_timeout, + .ndo_set_multicast_list = bfin_mac_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = bfin_mac_poll, +#endif +}; + static int __devinit bfin_mac_probe(struct platform_device *pdev) { struct net_device *ndev; From 4c713189485dbea875aecd1990daed74908e181d Mon Sep 17 00:00:00 2001 From: Dave Young Date: Wed, 27 May 2009 09:10:28 +0200 Subject: [PATCH 11/26] Bluetooth: Remove useless flush_work() causing lockdep warnings The calls to flush_work() are pointless in a single thread workqueue and they are actually causing a lockdep warning. ============================================= [ INFO: possible recursive locking detected ] 2.6.30-rc6-02911-gbb803cf #16 --------------------------------------------- bluetooth/2518 is trying to acquire lock: (bluetooth){+.+.+.}, at: [] flush_work+0x28/0xb0 but task is already holding lock: (bluetooth){+.+.+.}, at: [] worker_thread+0x149/0x25e other info that might help us debug this: 2 locks held by bluetooth/2518: #0: (bluetooth){+.+.+.}, at: [] worker_thread+0x149/0x25e #1: (&conn->work_del){+.+...}, at: [] worker_thread+0x149/0x25e stack backtrace: Pid: 2518, comm: bluetooth Not tainted 2.6.30-rc6-02911-gbb803cf #16 Call Trace: [] ? printk+0xf/0x11 [] __lock_acquire+0x7ce/0xb1b [] lock_acquire+0x90/0xad [] ? flush_work+0x28/0xb0 [] flush_work+0x42/0xb0 [] ? flush_work+0x28/0xb0 [] del_conn+0x1c/0x84 [bluetooth] [] worker_thread+0x18e/0x25e [] ? worker_thread+0x149/0x25e [] ? del_conn+0x0/0x84 [bluetooth] [] ? autoremove_wake_function+0x0/0x33 [] ? worker_thread+0x0/0x25e [] kthread+0x45/0x6b [] ? kthread+0x0/0x6b [] kernel_thread_helper+0x7/0x10 Based on a report by Oliver Hartkopp Signed-off-by: Dave Young Tested-by: Oliver Hartkopp Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_sysfs.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index 4cc3624bd22..95f7a7a544b 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -90,9 +90,6 @@ static void add_conn(struct work_struct *work) struct hci_conn *conn = container_of(work, struct hci_conn, work_add); struct hci_dev *hdev = conn->hdev; - /* ensure previous del is complete */ - flush_work(&conn->work_del); - dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); if (device_add(&conn->dev) < 0) { @@ -118,9 +115,6 @@ static void del_conn(struct work_struct *work) struct hci_conn *conn = container_of(work, struct hci_conn, work_del); struct hci_dev *hdev = conn->hdev; - /* ensure previous add is complete */ - flush_work(&conn->work_add); - if (!device_is_registered(&conn->dev)) return; From 683a04cebc63819a36b1db19843bd17771f05b55 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Wed, 27 May 2009 15:45:34 +0200 Subject: [PATCH 12/26] netfilter: xt_hashlimit does a wrong SEQ_SKIP The function dl_seq_show() returns 1 (equal to SEQ_SKIP) in case a seq_printf() call return -1. It should return -1. This SEQ_SKIP behavior brakes processing the proc file e.g. via a pipe or just through less. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Patrick McHardy --- net/netfilter/xt_hashlimit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index a5b5369c30f..219dcdbe388 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -926,7 +926,7 @@ static int dl_seq_show(struct seq_file *s, void *v) if (!hlist_empty(&htable->hash[*bucket])) { hlist_for_each_entry(ent, pos, &htable->hash[*bucket], node) if (dl_seq_real_show(ent, htable->family, s)) - return 1; + return -1; } return 0; } From eeff9beec3d2563c42cca41e66d4169592bb5475 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 27 May 2009 15:49:11 +0200 Subject: [PATCH 13/26] netfilter: nfnetlink_log: fix wrong skbuff size calculation This problem was introduced in 72961ecf84d67d6359a1b30f9b2a8427f13e1e71 since no space was reserved for the new attributes NFULA_HWTYPE, NFULA_HWLEN and NFULA_HWHEADER. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- net/netfilter/nfnetlink_log.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index fd326ac27ec..66a6dd5c519 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -581,6 +581,12 @@ nfulnl_log_packet(u_int8_t pf, + nla_total_size(sizeof(struct nfulnl_msg_packet_hw)) + nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp)); + if (in && skb_mac_header_was_set(skb)) { + size += nla_total_size(skb->dev->hard_header_len) + + nla_total_size(sizeof(u_int16_t)) /* hwtype */ + + nla_total_size(sizeof(u_int16_t)); /* hwlen */ + } + spin_lock_bh(&inst->lock); if (inst->flags & NFULNL_CFG_F_SEQ) From 10b6d95612672f89deb39b5a60fb677c78ba4844 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 28 May 2009 11:23:02 +0000 Subject: [PATCH 14/26] cxgb3: fix dma mapping regression Commit 5e68b772e6efd189d6aca76f6872fb75d51ace60 cxgb3: map entire Rx page, feed map+offset to Rx ring. introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR() and related macros as no-ops. Rx descriptors are fed with the a page buffer bus address + page chunk offset. The page buffer bus address is set and retrieved through pci_unamp_addr_set(), pci_unmap_addr(). These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set). The HW ends up with a bogus bus address. This patch saves the page buffer bus address for all plaftorms. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/adapter.h | 4 ++-- drivers/net/cxgb3/sge.c | 11 +++++------ 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h index 714df2b675e..c888e97c967 100644 --- a/drivers/net/cxgb3/adapter.h +++ b/drivers/net/cxgb3/adapter.h @@ -85,8 +85,8 @@ struct fl_pg_chunk { struct page *page; void *va; unsigned int offset; - u64 *p_cnt; - DECLARE_PCI_UNMAP_ADDR(mapping); + unsigned long *p_cnt; + dma_addr_t mapping; }; struct rx_desc; diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 26d3587f339..b3ee2bc1a00 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -355,7 +355,7 @@ static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q, (*d->pg_chunk.p_cnt)--; if (!*d->pg_chunk.p_cnt) pci_unmap_page(pdev, - pci_unmap_addr(&d->pg_chunk, mapping), + d->pg_chunk.mapping, q->alloc_size, PCI_DMA_FROMDEVICE); put_page(d->pg_chunk.page); @@ -454,7 +454,7 @@ static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q, q->pg_chunk.offset = 0; mapping = pci_map_page(adapter->pdev, q->pg_chunk.page, 0, q->alloc_size, PCI_DMA_FROMDEVICE); - pci_unmap_addr_set(&q->pg_chunk, mapping, mapping); + q->pg_chunk.mapping = mapping; } sd->pg_chunk = q->pg_chunk; @@ -511,8 +511,7 @@ static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp) nomem: q->alloc_failed++; break; } - mapping = pci_unmap_addr(&sd->pg_chunk, mapping) + - sd->pg_chunk.offset; + mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset; pci_unmap_addr_set(sd, dma_addr, mapping); add_one_rx_chunk(mapping, d, q->gen); @@ -881,7 +880,7 @@ recycle: (*sd->pg_chunk.p_cnt)--; if (!*sd->pg_chunk.p_cnt) pci_unmap_page(adap->pdev, - pci_unmap_addr(&sd->pg_chunk, mapping), + sd->pg_chunk.mapping, fl->alloc_size, PCI_DMA_FROMDEVICE); if (!skb) { @@ -2096,7 +2095,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, (*sd->pg_chunk.p_cnt)--; if (!*sd->pg_chunk.p_cnt) pci_unmap_page(adap->pdev, - pci_unmap_addr(&sd->pg_chunk, mapping), + sd->pg_chunk.mapping, fl->alloc_size, PCI_DMA_FROMDEVICE); From c22c8149313ee85c912e7b77a7afd04be8b8cba8 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 28 May 2009 11:23:08 +0000 Subject: [PATCH 15/26] cxgb3: link fault fixes Do not call t3_link_fault() under spinlock, as it calls msleep(). Besides, only the access to pi->link_fault needs to be serialized. Also initialize local variables before checking the link status, link state fields might otherwise end up containing garbage. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 8 +++++--- drivers/net/cxgb3/t3_hw.c | 5 +++++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 7ea48414c6c..17858b9a583 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2496,14 +2496,16 @@ static void check_link_status(struct adapter *adapter) for_each_port(adapter, i) { struct net_device *dev = adapter->port[i]; struct port_info *p = netdev_priv(dev); + int link_fault; spin_lock_irq(&adapter->work_lock); - if (p->link_fault) { + link_fault = p->link_fault; + spin_unlock_irq(&adapter->work_lock); + + if (link_fault) { t3_link_fault(adapter, i); - spin_unlock_irq(&adapter->work_lock); continue; } - spin_unlock_irq(&adapter->work_lock); if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) { t3_xgm_intr_disable(adapter, i); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 4f68aeb2679..4950d5d789a 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -1274,6 +1274,11 @@ void t3_link_fault(struct adapter *adapter, int port_id) A_XGM_INT_STATUS + mac->offset); link_fault &= F_LINKFAULTCHANGE; + link_ok = lc->link_ok; + speed = lc->speed; + duplex = lc->duplex; + fc = lc->fc; + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); if (link_fault) { From 4e0168fa4842e27795a75b205a510f25b62181d9 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Thu, 28 May 2009 02:05:53 +0000 Subject: [PATCH 16/26] mac8390: fix build with NET_POLL_CONTROLLER Fix the build for CONFIG_NET_POLL_CONTROLLER that I broke with 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion"). Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/mac8390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index f26667d5eaa..22e74a0e036 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -489,7 +489,7 @@ static const struct net_device_ops mac8390_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, + .ndo_poll_controller = __ei_poll, #endif }; From 21a4cc00e8e67edcfc1bdb9af6d370ed1226eb86 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 28 May 2009 11:39:02 +0200 Subject: [PATCH 17/26] at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan http://bugzilla.kernel.org/show_bug.cgi?id=13312 at76_dwork_hw_scan holds a mutex while calling ieee80211_scan_completed, which then calls at76_config which needs the same mutex. This reworks the ordering to not hold the lock while calling ieee80211_scan_completed. Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 744f4f4dd3d..8d93ca4651b 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1873,18 +1873,18 @@ static void at76_dwork_hw_scan(struct work_struct *work) if (ret != CMD_STATUS_COMPLETE) { queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, SCAN_POLL_INTERVAL); - goto exit; + mutex_unlock(&priv->mtx); + return; } - ieee80211_scan_completed(priv->hw, false); - if (is_valid_ether_addr(priv->bssid)) at76_join(priv); - ieee80211_wake_queues(priv->hw); - -exit: mutex_unlock(&priv->mtx); + + ieee80211_scan_completed(priv->hw, false); + + ieee80211_wake_queues(priv->hw); } static int at76_hw_scan(struct ieee80211_hw *hw, From aeeab4ff06b8e29cfe2fe730ba626f7e2487ba03 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 27 May 2009 09:21:57 +0200 Subject: [PATCH 18/26] rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle http://bugzilla.kernel.org/show_bug.cgi?id=13383 Reported-by: Przemyslaw Kulczycki Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/rtl818x/rtl8187_dev.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 8a0823588c5..3d94e7dfea6 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -430,6 +430,7 @@ config RTL8187 ASUS P5B Deluxe Toshiba Satellite Pro series of laptops Asus Wireless Link + Linksys WUSB54GC-EU Thanks to Realtek for their support! diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index bac6cfba6ab..d51ba0a88c2 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -71,6 +71,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187}, /* AirLive */ {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187}, + /* Linksys */ + {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B}, {} }; From 465440d2720543669841db5b0691ba41892ed0ae Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 25 May 2009 20:57:21 +0000 Subject: [PATCH 19/26] mlx4_en: Fix a kernel panic when waking tx queue When the transmit queue gets full we enable interrupts for TX completions There was a race that we handled the TX queue both from the interrupt context and from the transmit function. Using "spin_trylock_irq()" ensures this doesn't happen. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index ac6fc499b28..e5c98a98ad3 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -426,7 +426,7 @@ void mlx4_en_poll_tx_cq(unsigned long data) INC_PERF_COUNTER(priv->pstats.tx_poll); - if (!spin_trylock(&ring->comp_lock)) { + if (!spin_trylock_irq(&ring->comp_lock)) { mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); return; } @@ -439,7 +439,7 @@ void mlx4_en_poll_tx_cq(unsigned long data) if (inflight && priv->port_up) mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); - spin_unlock(&ring->comp_lock); + spin_unlock_irq(&ring->comp_lock); } static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv, @@ -482,9 +482,9 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) /* Poll the CQ every mlx4_en_TX_MODER_POLL packets */ if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0) - if (spin_trylock(&ring->comp_lock)) { + if (spin_trylock_irq(&ring->comp_lock)) { mlx4_en_process_tx_cq(priv->dev, cq); - spin_unlock(&ring->comp_lock); + spin_unlock_irq(&ring->comp_lock); } } From bdb0e010bf0061a73027cc84dd7ad192c663eca3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 29 May 2009 22:04:54 -0700 Subject: [PATCH 20/26] ath1e: add new device id for asus hardware Gary Lin reports that a new device id needs to be added to the atl1e in order to get some new Asus hardware to work properly. Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/atl1e/atl1e_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index fb57b750866..1342418fb20 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -37,6 +37,7 @@ char atl1e_driver_version[] = DRV_VERSION; */ static struct pci_device_id atl1e_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)}, + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)}, /* required last entry */ { 0 } }; From cf4ae4e3de83e2c7394af70b46f4f50e5f0fb90c Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Fri, 29 May 2009 22:06:33 -0700 Subject: [PATCH 21/26] net/firmare: Ignore .cis files Signed-off-by: Matt Kraai Signed-off-by: David S. Miller --- firmware/cis/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 firmware/cis/.gitignore diff --git a/firmware/cis/.gitignore b/firmware/cis/.gitignore new file mode 100644 index 00000000000..1de39847f26 --- /dev/null +++ b/firmware/cis/.gitignore @@ -0,0 +1 @@ +*.cis From 4371ee353c3fc41aad9458b8e8e627eb508bc9a3 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 1 Jun 2009 02:43:17 -0700 Subject: [PATCH 22/26] MAINTAINERS: take maintainership of the cpmac Ethernet driver This patch adds me as the maintainer of the CPMAC (AR7) Ethernet driver. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2b349ba4add..111fc169437 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1532,6 +1532,13 @@ W: http://www.fi.muni.cz/~kas/cosa/ S: Maintained F: drivers/net/wan/cosa* +CPMAC ETHERNET DRIVER +P: Florian Fainelli +M: florian@openwrt.org +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/cpmac.c + CPU FREQUENCY DRIVERS P: Dave Jones M: davej@redhat.com From cf9f6e21c155d5add733b969c695837ead79eeab Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 1 Jun 2009 03:12:04 -0700 Subject: [PATCH 23/26] 3c509: Add missing EISA IDs Several EISA device IDs for 3c509 family network cards are missing from the driver, making the cards unusable in their EISA mode. Here's a fix to add them based on the EISA configuration files distributed by 3Com and our eisa.ids database. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/3c509.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index fbb37192199..682aad89708 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -480,9 +480,13 @@ static int pnp_registered; #ifdef CONFIG_EISA static struct eisa_device_id el3_eisa_ids[] = { + { "TCM5090" }, + { "TCM5091" }, { "TCM5092" }, { "TCM5093" }, + { "TCM5094" }, { "TCM5095" }, + { "TCM5098" }, { "" } }; MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); From 5a9a8e32ebe269c71d8d3e78f9435fe7729f38e9 Mon Sep 17 00:00:00 2001 From: Ed Swierk Date: Tue, 2 Jun 2009 00:19:52 -0700 Subject: [PATCH 24/26] forcedeth: add phy_power_down parameter, leave phy powered up by default (v2) Add a phy_power_down parameter to forcedeth: set to 1 to power down the phy and disable the link when an interface goes down; set to 0 to always leave the phy powered up. The phy power state persists across reboots; Windows, some BIOSes, and older versions of Linux don't bother to power up the phy again, forcing users to remove all power to get the interface working (see http://bugzilla.kernel.org/show_bug.cgi?id=13072). Leaving the phy powered on is the safest default behavior. Users accustomed to seeing the link state reflect the interface state and/or wanting to minimize power consumption can set phy_power_down=1 if compatibility with other OSes is not an issue. Signed-off-by: Ed Swierk Signed-off-by: David S. Miller --- drivers/net/forcedeth.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index f9a846b1b92..9f6a68fb7b4 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -897,6 +897,12 @@ enum { }; static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED; +/* + * Power down phy when interface is down (persists through reboot; + * older Linux and other OSes may not power it up again) + */ +static int phy_power_down = 0; + static inline struct fe_priv *get_nvpriv(struct net_device *dev) { return netdev_priv(dev); @@ -1485,7 +1491,10 @@ static int phy_init(struct net_device *dev) /* restart auto negotiation, power down phy */ mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); - mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN); + mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE); + if (phy_power_down) { + mii_control |= BMCR_PDOWN; + } if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) { return PHY_ERROR; } @@ -5513,7 +5522,7 @@ static int nv_close(struct net_device *dev) nv_drain_rxtx(dev); - if (np->wolenabled) { + if (np->wolenabled || !phy_power_down) { writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags); nv_start_rx(dev); } else { @@ -6367,6 +6376,8 @@ module_param(dma_64bit, int, 0); MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0."); module_param(phy_cross, int, 0); MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0."); +module_param(phy_power_down, int, 0); +MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0)."); MODULE_AUTHOR("Manfred Spraul "); MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver"); From ea30e11970a96cfe5e32c03a29332554573b4a10 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 2 Jun 2009 01:29:58 -0700 Subject: [PATCH 25/26] e1000: add missing length check to e1000 receive routine Patch to fix bad length checking in e1000. E1000 by default does two things: 1) Spans rx descriptors for packets that don't fit into 1 skb on recieve 2) Strips the crc from a frame by subtracting 4 bytes from the length prior to doing an skb_put Since the e1000 driver isn't written to support receiving packets that span multiple rx buffers, it checks the End of Packet bit of every frame, and discards it if its not set. This places us in a situation where, if we have a spanning packet, the first part is discarded, but the second part is not (since it is the end of packet, and it passes the EOP bit test). If the second part of the frame is small (4 bytes or less), we subtract 4 from it to remove its crc, underflow the length, and wind up in skb_over_panic, when we try to skb_put a huge number of bytes into the skb. This amounts to a remote DOS attack through careful selection of frame size in relation to interface MTU. The fix for this is already in the e1000e driver, as well as the e1000 sourceforge driver, but no one ever pushed it to e1000. This is lifted straight from e1000e, and prevents small frames from causing the underflow described above Signed-off-by: Neil Horman Tested-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index b1419e21b46..fffb006b7d9 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4027,8 +4027,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, PCI_DMA_FROMDEVICE); length = le16_to_cpu(rx_desc->length); - - if (unlikely(!(status & E1000_RXD_STAT_EOP))) { + /* !EOP means multiple descriptors were used to store a single + * packet, also make sure the frame isn't just CRC only */ + if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" " buffers\n", netdev->name); From 12186be7d2e1106cede1cc728526e3d7998cbe94 Mon Sep 17 00:00:00 2001 From: Minoru Usui Date: Tue, 2 Jun 2009 02:17:34 -0700 Subject: [PATCH 26/26] net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup This patch fixes a bug which unconfigured struct tcf_proto keeps chaining in tc_ctl_tfilter(), and avoids kernel panic in cls_cgroup_classify() when we use cls_cgroup. When we execute 'tc filter add', tcf_proto is allocated, initialized by classifier's init(), and chained. After it's chained, tc_ctl_tfilter() calls classifier's change(). When classifier's change() fails, tc_ctl_tfilter() does not free and keeps tcf_proto. In addition, cls_cgroup is initialized in change() not in init(). It accesses unconfigured struct tcf_proto which is chained before change(), then hits Oops. Signed-off-by: Minoru Usui Signed-off-by: Jarek Poplawski Signed-off-by: Jamal Hadi Salim Tested-by: Minoru Usui Signed-off-by: David S. Miller --- net/sched/cls_api.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 0759f32e9dc..09cdcdfe7e9 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -135,6 +135,7 @@ static int tc_ctl_tfilter(struct sk_buff *skb, struct nlmsghdr *n, void *arg) unsigned long cl; unsigned long fh; int err; + int tp_created = 0; if (net != &init_net) return -EINVAL; @@ -266,10 +267,7 @@ replay: goto errout; } - spin_lock_bh(root_lock); - tp->next = *back; - *back = tp; - spin_unlock_bh(root_lock); + tp_created = 1; } else if (tca[TCA_KIND] && nla_strcmp(tca[TCA_KIND], tp->ops->kind)) goto errout; @@ -296,8 +294,11 @@ replay: switch (n->nlmsg_type) { case RTM_NEWTFILTER: err = -EEXIST; - if (n->nlmsg_flags & NLM_F_EXCL) + if (n->nlmsg_flags & NLM_F_EXCL) { + if (tp_created) + tcf_destroy(tp); goto errout; + } break; case RTM_DELTFILTER: err = tp->ops->delete(tp, fh); @@ -314,8 +315,18 @@ replay: } err = tp->ops->change(tp, cl, t->tcm_handle, tca, &fh); - if (err == 0) + if (err == 0) { + if (tp_created) { + spin_lock_bh(root_lock); + tp->next = *back; + *back = tp; + spin_unlock_bh(root_lock); + } tfilter_notify(skb, n, tp, fh, RTM_NEWTFILTER); + } else { + if (tp_created) + tcf_destroy(tp); + } errout: if (cl)