[PATCH] md: Allow stripes to be expanded in preparation for expanding an array

Before a RAID-5 can be expanded, we need to be able to expand the stripe-cache
data structure.

This requires allocating new stripes in a new kmem_cache.  If this succeeds,
we copy cache pages over and release the old stripes and kmem_cache.

We then allocate new pages.  If that fails, we leave the stripe cache at it's
new size.  It isn't worth the effort to shrink it back again.

Unfortuanately this means we need two kmem_cache names as we, for a short
period of time, we have two kmem_caches.  So they are raid5/%s and
raid5/%s-alt

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/md/md.c

@@ -2775,7 +2775,6 @@ static void autorun_array(mddev_t *mddev)
  */
 static void autorun_devices(int part)
 {
-	struct list_head candidates;
 	struct list_head *tmp;
 	mdk_rdev_t *rdev0, *rdev;
 	mddev_t *mddev;
@@ -2784,6 +2783,7 @@ static void autorun_devices(int part)
 	printk(KERN_INFO "md: autorun ...\n");
 	while (!list_empty(&pending_raid_disks)) {
 		dev_t dev;
+		LIST_HEAD(candidates);
 		rdev0 = list_entry(pending_raid_disks.next,
 					 mdk_rdev_t, same_set);
 

drivers/md/raid5.c

@@ -313,20 +313,143 @@ static int grow_stripes(raid5_conf_t *conf, int num)
 	kmem_cache_t *sc;
 	int devs = conf->raid_disks;
 
-	sprintf(conf->cache_name, "raid5/%s", mdname(conf->mddev));
-
-	sc = kmem_cache_create(conf->cache_name, 
+	sprintf(conf->cache_name[0], "raid5/%s", mdname(conf->mddev));
+	sprintf(conf->cache_name[1], "raid5/%s-alt", mdname(conf->mddev));
+	conf->active_name = 0;
+	sc = kmem_cache_create(conf->cache_name[conf->active_name],
 			       sizeof(struct stripe_head)+(devs-1)*sizeof(struct r5dev),
 			       0, 0, NULL, NULL);
 	if (!sc)
 		return 1;
 	conf->slab_cache = sc;
+	conf->pool_size = devs;
 	while (num--) {
 		if (!grow_one_stripe(conf))
 			return 1;
 	}
 	return 0;
 }
+static int resize_stripes(raid5_conf_t *conf, int newsize)
+{
+	/* Make all the stripes able to hold 'newsize' devices.
+	 * New slots in each stripe get 'page' set to a new page.
+	 *
+	 * This happens in stages:
+	 * 1/ create a new kmem_cache and allocate the required number of
+	 *    stripe_heads.
+	 * 2/ gather all the old stripe_heads and tranfer the pages across
+	 *    to the new stripe_heads.  This will have the side effect of
+	 *    freezing the array as once all stripe_heads have been collected,
+	 *    no IO will be possible.  Old stripe heads are freed once their
+	 *    pages have been transferred over, and the old kmem_cache is
+	 *    freed when all stripes are done.
+	 * 3/ reallocate conf->disks to be suitable bigger.  If this fails,
+	 *    we simple return a failre status - no need to clean anything up.
+	 * 4/ allocate new pages for the new slots in the new stripe_heads.
+	 *    If this fails, we don't bother trying the shrink the
+	 *    stripe_heads down again, we just leave them as they are.
+	 *    As each stripe_head is processed the new one is released into
+	 *    active service.
+	 *
+	 * Once step2 is started, we cannot afford to wait for a write,
+	 * so we use GFP_NOIO allocations.
+	 */
+	struct stripe_head *osh, *nsh;
+	LIST_HEAD(newstripes);
+	struct disk_info *ndisks;
+	int err = 0;
+	kmem_cache_t *sc;
+	int i;
+
+	if (newsize <= conf->pool_size)
+		return 0; /* never bother to shrink */
+
+	/* Step 1 */
+	sc = kmem_cache_create(conf->cache_name[1-conf->active_name],
+			       sizeof(struct stripe_head)+(newsize-1)*sizeof(struct r5dev),
+			       0, 0, NULL, NULL);
+	if (!sc)
+		return -ENOMEM;
+
+	for (i = conf->max_nr_stripes; i; i--) {
+		nsh = kmem_cache_alloc(sc, GFP_KERNEL);
+		if (!nsh)
+			break;
+
+		memset(nsh, 0, sizeof(*nsh) + (newsize-1)*sizeof(struct r5dev));
+
+		nsh->raid_conf = conf;
+		spin_lock_init(&nsh->lock);
+
+		list_add(&nsh->lru, &newstripes);
+	}
+	if (i) {
+		/* didn't get enough, give up */
+		while (!list_empty(&newstripes)) {
+			nsh = list_entry(newstripes.next, struct stripe_head, lru);
+			list_del(&nsh->lru);
+			kmem_cache_free(sc, nsh);
+		}
+		kmem_cache_destroy(sc);
+		return -ENOMEM;
+	}
+	/* Step 2 - Must use GFP_NOIO now.
+	 * OK, we have enough stripes, start collecting inactive
+	 * stripes and copying them over
+	 */
+	list_for_each_entry(nsh, &newstripes, lru) {
+		spin_lock_irq(&conf->device_lock);
+		wait_event_lock_irq(conf->wait_for_stripe,
+				    !list_empty(&conf->inactive_list),
+				    conf->device_lock,
+				    unplug_slaves(conf->mddev);
+			);
+		osh = get_free_stripe(conf);
+		spin_unlock_irq(&conf->device_lock);
+		atomic_set(&nsh->count, 1);
+		for(i=0; i<conf->pool_size; i++)
+			nsh->dev[i].page = osh->dev[i].page;
+		for( ; i<newsize; i++)
+			nsh->dev[i].page = NULL;
+		kmem_cache_free(conf->slab_cache, osh);
+	}
+	kmem_cache_destroy(conf->slab_cache);
+
+	/* Step 3.
+	 * At this point, we are holding all the stripes so the array
+	 * is completely stalled, so now is a good time to resize
+	 * conf->disks.
+	 */
+	ndisks = kzalloc(newsize * sizeof(struct disk_info), GFP_NOIO);
+	if (ndisks) {
+		for (i=0; i<conf->raid_disks; i++)
+			ndisks[i] = conf->disks[i];
+		kfree(conf->disks);
+		conf->disks = ndisks;
+	} else
+		err = -ENOMEM;
+
+	/* Step 4, return new stripes to service */
+	while(!list_empty(&newstripes)) {
+		nsh = list_entry(newstripes.next, struct stripe_head, lru);
+		list_del_init(&nsh->lru);
+		for (i=conf->raid_disks; i < newsize; i++)
+			if (nsh->dev[i].page == NULL) {
+				struct page *p = alloc_page(GFP_NOIO);
+				nsh->dev[i].page = p;
+				if (!p)
+					err = -ENOMEM;
+			}
+		release_stripe(nsh);
+	}
+	/* critical section pass, GFP_NOIO no longer needed */
+
+	conf->slab_cache = sc;
+	conf->active_name = 1-conf->active_name;
+	conf->pool_size = newsize;
+	return err;
+}
+
 
 static int drop_one_stripe(raid5_conf_t *conf)
 {
@@ -339,7 +462,7 @@ static int drop_one_stripe(raid5_conf_t *conf)
 		return 0;
 	if (atomic_read(&sh->count))
 		BUG();
-	shrink_buffers(sh, conf->raid_disks);
+	shrink_buffers(sh, conf->pool_size);
 	kmem_cache_free(conf->slab_cache, sh);
 	atomic_dec(&conf->active_stripes);
 	return 1;

drivers/md/raid6main.c

@@ -331,9 +331,9 @@ static int grow_stripes(raid6_conf_t *conf, int num)
 	kmem_cache_t *sc;
 	int devs = conf->raid_disks;
 
-	sprintf(conf->cache_name, "raid6/%s", mdname(conf->mddev));
+	sprintf(conf->cache_name[0], "raid6/%s", mdname(conf->mddev));
 
-	sc = kmem_cache_create(conf->cache_name,
+	sc = kmem_cache_create(conf->cache_name[0],
 			       sizeof(struct stripe_head)+(devs-1)*sizeof(struct r5dev),
 			       0, 0, NULL, NULL);
 	if (!sc)

include/linux/raid/raid5.h

@@ -216,7 +216,11 @@ struct raid5_private_data {
 	struct list_head	bitmap_list; /* stripes delaying awaiting bitmap update */
 	atomic_t		preread_active_stripes; /* stripes with scheduled io */
 
-	char			cache_name[20];
+	/* unfortunately we need two cache names as we temporarily have
+	 * two caches.
+	 */
+	int			active_name;
+	char			cache_name[2][20];
 	kmem_cache_t		*slab_cache; /* for allocating stripes */
 
 	int			seq_flush, seq_write;
@@ -238,7 +242,8 @@ struct raid5_private_data {
 	wait_queue_head_t	wait_for_overlap;
 	int			inactive_blocked;	/* release of inactive stripes blocked,
 							 * waiting for 25% to be free
-							 */        
+							 */
+	int			pool_size; /* number of disks in stripeheads in pool */
 	spinlock_t		device_lock;
 	struct disk_info	*disks;
 };