diff --git a/arch/blackfin/include/asm/bfin-lq035q1.h b/arch/blackfin/include/asm/bfin-lq035q1.h new file mode 100644 index 00000000000..57bc21ac229 --- /dev/null +++ b/arch/blackfin/include/asm/bfin-lq035q1.h @@ -0,0 +1,28 @@ +/* + * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02 + * + * Copyright 2008-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef BFIN_LQ035Q1_H +#define BFIN_LQ035Q1_H + +#define LQ035_RL (0 << 8) /* Right -> Left Scan */ +#define LQ035_LR (1 << 8) /* Left -> Right Scan */ +#define LQ035_TB (1 << 9) /* Top -> Botton Scan */ +#define LQ035_BT (0 << 9) /* Botton -> Top Scan */ +#define LQ035_BGR (1 << 11) /* Use BGR format */ +#define LQ035_RGB (0 << 11) /* Use RGB format */ +#define LQ035_NORM (1 << 13) /* Reversal */ +#define LQ035_REV (0 << 13) /* Reversal */ + +struct bfin_lq035q1fb_disp_info { + + unsigned mode; + /* GPIOs */ + int use_bl; + unsigned gpio_bl; +}; + +#endif /* BFIN_LQ035Q1_H */ diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 99c0df1c7eb..5a5c303a637 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -614,6 +614,21 @@ config FB_BFIN_T350MCQB This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK. +config FB_BFIN_LQ035Q1 + tristate "SHARP LQ035Q1DH02 TFT LCD" + depends on FB && BLACKFIN && SPI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select BFIN_GPTIMERS + help + This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on + the Blackfin Landscape LCD EZ-Extender Card. + This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI + It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK. + + To compile this driver as a module, choose M here: the + module will be called bfin-lq035q1-fb. config FB_STI tristate "HP STI frame buffer device support" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 0f8da331ba0..4ecb30c4f3f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -137,6 +137,7 @@ obj-$(CONFIG_FB_EFI) += efifb.o obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o +obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o obj-$(CONFIG_FB_MX3) += mx3fb.o obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c new file mode 100644 index 00000000000..b690c269784 --- /dev/null +++ b/drivers/video/bfin-lq035q1-fb.c @@ -0,0 +1,826 @@ +/* + * Blackfin LCD Framebuffer driver SHARP LQ035Q1DH02 + * + * Copyright 2008-2009 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#define DRIVER_NAME "bfin-lq035q1" +#define pr_fmt(fmt) DRIVER_NAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#if defined(BF533_FAMILY) || defined(BF538_FAMILY) +#define TIMER_HSYNC_id TIMER1_id +#define TIMER_HSYNCbit TIMER1bit +#define TIMER_HSYNC_STATUS_TRUN TIMER_STATUS_TRUN1 +#define TIMER_HSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL1 +#define TIMER_HSYNC_STATUS_TOVF TIMER_STATUS_TOVF1 + +#define TIMER_VSYNC_id TIMER2_id +#define TIMER_VSYNCbit TIMER2bit +#define TIMER_VSYNC_STATUS_TRUN TIMER_STATUS_TRUN2 +#define TIMER_VSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL2 +#define TIMER_VSYNC_STATUS_TOVF TIMER_STATUS_TOVF2 +#else +#define TIMER_HSYNC_id TIMER0_id +#define TIMER_HSYNCbit TIMER0bit +#define TIMER_HSYNC_STATUS_TRUN TIMER_STATUS_TRUN0 +#define TIMER_HSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL0 +#define TIMER_HSYNC_STATUS_TOVF TIMER_STATUS_TOVF0 + +#define TIMER_VSYNC_id TIMER1_id +#define TIMER_VSYNCbit TIMER1bit +#define TIMER_VSYNC_STATUS_TRUN TIMER_STATUS_TRUN1 +#define TIMER_VSYNC_STATUS_TIMIL TIMER_STATUS_TIMIL1 +#define TIMER_VSYNC_STATUS_TOVF TIMER_STATUS_TOVF1 +#endif + +#define LCD_X_RES 320 /* Horizontal Resolution */ +#define LCD_Y_RES 240 /* Vertical Resolution */ +#define DMA_BUS_SIZE 16 + +#define USE_RGB565_16_BIT_PPI + +#ifdef USE_RGB565_16_BIT_PPI +#define LCD_BPP 16 /* Bit Per Pixel */ +#define CLOCKS_PER_PIX 1 +#define CPLD_PIPELINE_DELAY_COR 0 /* NO CPLB */ +#endif + +/* Interface 16/18-bit TFT over an 8-bit wide PPI using a small Programmable Logic Device (CPLD) + * http://blackfin.uclinux.org/gf/project/stamp/frs/?action=FrsReleaseBrowse&frs_package_id=165 + */ + +#ifdef USE_RGB565_8_BIT_PPI +#define LCD_BPP 16 /* Bit Per Pixel */ +#define CLOCKS_PER_PIX 2 +#define CPLD_PIPELINE_DELAY_COR 3 /* RGB565 */ +#endif + +#ifdef USE_RGB888_8_BIT_PPI +#define LCD_BPP 24 /* Bit Per Pixel */ +#define CLOCKS_PER_PIX 3 +#define CPLD_PIPELINE_DELAY_COR 5 /* RGB888 */ +#endif + + /* + * HS and VS timing parameters (all in number of PPI clk ticks) + */ + +#define U_LINE 4 /* Blanking Lines */ + +#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */ +#define H_PERIOD (336 * CLOCKS_PER_PIX) /* HS period */ +#define H_PULSE (2 * CLOCKS_PER_PIX) /* HS pulse width */ +#define H_START (7 * CLOCKS_PER_PIX + CPLD_PIPELINE_DELAY_COR) /* first valid pixel */ + +#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */ +#define V_PULSE (2 * CLOCKS_PER_PIX) /* VS pulse width (1-5 H_PERIODs) */ +#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */ + +#define ACTIVE_VIDEO_MEM_OFFSET ((U_LINE / 2) * LCD_X_RES * (LCD_BPP / 8)) + +#define BFIN_LCD_NBR_PALETTE_ENTRIES 256 + +#define PPI_TX_MODE 0x2 +#define PPI_XFER_TYPE_11 0xC +#define PPI_PORT_CFG_01 0x10 +#define PPI_POLS_1 0x8000 + +#if (CLOCKS_PER_PIX > 1) +#define PPI_PMODE (DLEN_8 | PACK_EN) +#else +#define PPI_PMODE (DLEN_16) +#endif + +#define LQ035_INDEX 0x74 +#define LQ035_DATA 0x76 + +#define LQ035_DRIVER_OUTPUT_CTL 0x1 +#define LQ035_SHUT_CTL 0x11 + +#define LQ035_DRIVER_OUTPUT_MASK (LQ035_LR | LQ035_TB | LQ035_BGR | LQ035_REV) +#define LQ035_DRIVER_OUTPUT_DEFAULT (0x2AEF & ~LQ035_DRIVER_OUTPUT_MASK) + +#define LQ035_SHUT (1 << 0) /* Shutdown */ +#define LQ035_ON (0 << 0) /* Shutdown */ + +struct bfin_lq035q1fb_info { + struct fb_info *fb; + struct device *dev; + struct spi_driver spidrv; + struct bfin_lq035q1fb_disp_info *disp_info; + unsigned char *fb_buffer; /* RGB Buffer */ + dma_addr_t dma_handle; + int lq035_open_cnt; + int irq; + spinlock_t lock; /* lock */ + u32 pseudo_pal[16]; +}; + +static int nocursor; +module_param(nocursor, int, 0644); +MODULE_PARM_DESC(nocursor, "cursor enable/disable"); + +struct spi_control { + unsigned short mode; +}; + +static int lq035q1_control(struct spi_device *spi, unsigned char reg, unsigned short value) +{ + int ret; + u8 regs[3] = { LQ035_INDEX, 0, 0 }; + u8 dat[3] = { LQ035_DATA, 0, 0 }; + + if (!spi) + return -ENODEV; + + regs[2] = reg; + dat[1] = value >> 8; + dat[2] = value & 0xFF; + + ret = spi_write(spi, regs, ARRAY_SIZE(regs)); + ret |= spi_write(spi, dat, ARRAY_SIZE(dat)); + return ret; +} + +static int __devinit lq035q1_spidev_probe(struct spi_device *spi) +{ + int ret; + struct spi_control *ctl; + struct bfin_lq035q1fb_info *info = container_of(spi->dev.driver, + struct bfin_lq035q1fb_info, + spidrv.driver); + + ctl = kzalloc(sizeof(*ctl), GFP_KERNEL); + + if (!ctl) + return -ENOMEM; + + ctl->mode = (info->disp_info->mode & + LQ035_DRIVER_OUTPUT_MASK) | LQ035_DRIVER_OUTPUT_DEFAULT; + + ret = lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON); + ret |= lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode); + if (ret) + return ret; + + spi_set_drvdata(spi, ctl); + + return 0; +} + +static int lq035q1_spidev_remove(struct spi_device *spi) +{ + return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); +} + +#ifdef CONFIG_PM +static int lq035q1_spidev_suspend(struct spi_device *spi, pm_message_t state) +{ + return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); +} + +static int lq035q1_spidev_resume(struct spi_device *spi) +{ + int ret; + struct spi_control *ctl = spi_get_drvdata(spi); + + ret = lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode); + if (ret) + return ret; + + return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON); +} +#else +# define lq035q1_spidev_suspend NULL +# define lq035q1_spidev_resume NULL +#endif + +/* Power down all displays on reboot, poweroff or halt */ +static void lq035q1_spidev_shutdown(struct spi_device *spi) +{ + lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT); +} + +static int lq035q1_backlight(struct bfin_lq035q1fb_info *info, unsigned arg) +{ + if (info->disp_info->use_bl) + gpio_set_value(info->disp_info->gpio_bl, arg); + + return 0; +} + +static void bfin_lq035q1_config_ppi(struct bfin_lq035q1fb_info *fbi) +{ + bfin_write_PPI_DELAY(H_START); + bfin_write_PPI_COUNT(H_ACTPIX - 1); + bfin_write_PPI_FRAME(V_LINES); + + bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */ + PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */ + PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */ + PPI_PMODE | /* 8/16 bit data length / PACK_EN? */ + PPI_POLS_1); /* faling edge syncs POLS */ +} + +static inline void bfin_lq035q1_disable_ppi(void) +{ + bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN); +} + +static inline void bfin_lq035q1_enable_ppi(void) +{ + bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN); +} + +static void bfin_lq035q1_start_timers(void) +{ + enable_gptimers(TIMER_VSYNCbit | TIMER_HSYNCbit); +} + +static void bfin_lq035q1_stop_timers(void) +{ + disable_gptimers(TIMER_HSYNCbit | TIMER_VSYNCbit); + + set_gptimer_status(0, TIMER_HSYNC_STATUS_TRUN | TIMER_VSYNC_STATUS_TRUN | + TIMER_HSYNC_STATUS_TIMIL | TIMER_VSYNC_STATUS_TIMIL | + TIMER_HSYNC_STATUS_TOVF | TIMER_VSYNC_STATUS_TOVF); + +} + +static void bfin_lq035q1_init_timers(void) +{ + + bfin_lq035q1_stop_timers(); + + set_gptimer_period(TIMER_HSYNC_id, H_PERIOD); + set_gptimer_pwidth(TIMER_HSYNC_id, H_PULSE); + set_gptimer_config(TIMER_HSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | + TIMER_TIN_SEL | TIMER_CLK_SEL| + TIMER_EMU_RUN); + + set_gptimer_period(TIMER_VSYNC_id, V_PERIOD); + set_gptimer_pwidth(TIMER_VSYNC_id, V_PULSE); + set_gptimer_config(TIMER_VSYNC_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | + TIMER_TIN_SEL | TIMER_CLK_SEL | + TIMER_EMU_RUN); + +} + +static void bfin_lq035q1_config_dma(struct bfin_lq035q1fb_info *fbi) +{ + + set_dma_config(CH_PPI, + set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO, + INTR_DISABLE, DIMENSION_2D, + DATA_SIZE_16, + DMA_NOSYNC_KEEP_DMA_BUF)); + set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE); + set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8); + set_dma_y_count(CH_PPI, V_LINES); + + set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8); + set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer); + +} + +#if (CLOCKS_PER_PIX == 1) +static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, + P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, + P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, + P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, + P_PPI0_D15, 0}; +#else +static const u16 ppi0_req_16[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, + P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, + P_PPI0_D6, P_PPI0_D7, 0}; +#endif + +static inline void bfin_lq035q1_free_ports(void) +{ + peripheral_free_list(ppi0_req_16); + if (ANOMALY_05000400) + gpio_free(P_IDENT(P_PPI0_FS3)); +} + +static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev) +{ + /* ANOMALY_05000400 - PPI Does Not Start Properly In Specific Mode: + * Drive PPI_FS3 Low + */ + if (ANOMALY_05000400) { + int ret = gpio_request(P_IDENT(P_PPI0_FS3), "PPI_FS3"); + if (ret) + return ret; + gpio_direction_output(P_IDENT(P_PPI0_FS3), 0); + } + + if (peripheral_request_list(ppi0_req_16, DRIVER_NAME)) { + dev_err(&pdev->dev, "requesting peripherals failed\n"); + return -EFAULT; + } + + return 0; +} + +static int bfin_lq035q1_fb_open(struct fb_info *info, int user) +{ + struct bfin_lq035q1fb_info *fbi = info->par; + + spin_lock(&fbi->lock); + fbi->lq035_open_cnt++; + + if (fbi->lq035_open_cnt <= 1) { + + bfin_lq035q1_disable_ppi(); + SSYNC(); + + bfin_lq035q1_config_dma(fbi); + bfin_lq035q1_config_ppi(fbi); + bfin_lq035q1_init_timers(); + + /* start dma */ + enable_dma(CH_PPI); + bfin_lq035q1_enable_ppi(); + bfin_lq035q1_start_timers(); + lq035q1_backlight(fbi, 1); + } + + spin_unlock(&fbi->lock); + + return 0; +} + +static int bfin_lq035q1_fb_release(struct fb_info *info, int user) +{ + struct bfin_lq035q1fb_info *fbi = info->par; + + spin_lock(&fbi->lock); + + fbi->lq035_open_cnt--; + + if (fbi->lq035_open_cnt <= 0) { + lq035q1_backlight(fbi, 0); + bfin_lq035q1_disable_ppi(); + SSYNC(); + disable_dma(CH_PPI); + bfin_lq035q1_stop_timers(); + } + + spin_unlock(&fbi->lock); + + return 0; +} + +static int bfin_lq035q1_fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + switch (var->bits_per_pixel) { +#if (LCD_BPP == 24) + case 24:/* TRUECOLOUR, 16m */ +#else + case 16:/* DIRECTCOLOUR, 64k */ +#endif + var->red.offset = info->var.red.offset; + var->green.offset = info->var.green.offset; + var->blue.offset = info->var.blue.offset; + var->red.length = info->var.red.length; + var->green.length = info->var.green.length; + var->blue.length = info->var.blue.length; + var->transp.offset = 0; + var->transp.length = 0; + var->transp.msb_right = 0; + var->red.msb_right = 0; + var->green.msb_right = 0; + var->blue.msb_right = 0; + break; + default: + pr_debug("%s: depth not supported: %u BPP\n", __func__, + var->bits_per_pixel); + return -EINVAL; + } + + if (info->var.xres != var->xres || info->var.yres != var->yres || + info->var.xres_virtual != var->xres_virtual || + info->var.yres_virtual != var->yres_virtual) { + pr_debug("%s: Resolution not supported: X%u x Y%u \n", + __func__, var->xres, var->yres); + return -EINVAL; + } + + /* + * Memory limit + */ + + if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) { + pr_debug("%s: Memory Limit requested yres_virtual = %u\n", + __func__, var->yres_virtual); + return -ENOMEM; + } + + + return 0; +} + +int bfin_lq035q1_fb_cursor(struct fb_info *info, struct fb_cursor *cursor) +{ + if (nocursor) + return 0; + else + return -EINVAL; /* just to force soft_cursor() call */ +} + +static int bfin_lq035q1_fb_setcolreg(u_int regno, u_int red, u_int green, + u_int blue, u_int transp, + struct fb_info *info) +{ + if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES) + return -EINVAL; + + if (info->var.grayscale) { + /* grayscale = 0.30*R + 0.59*G + 0.11*B */ + red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; + } + + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + + u32 value; + /* Place color in the pseudopalette */ + if (regno > 16) + return -EINVAL; + + red >>= (16 - info->var.red.length); + green >>= (16 - info->var.green.length); + blue >>= (16 - info->var.blue.length); + + value = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + value &= 0xFFFFFF; + + ((u32 *) (info->pseudo_palette))[regno] = value; + + } + + return 0; +} + +static struct fb_ops bfin_lq035q1_fb_ops = { + .owner = THIS_MODULE, + .fb_open = bfin_lq035q1_fb_open, + .fb_release = bfin_lq035q1_fb_release, + .fb_check_var = bfin_lq035q1_fb_check_var, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_cursor = bfin_lq035q1_fb_cursor, + .fb_setcolreg = bfin_lq035q1_fb_setcolreg, +}; + +static irqreturn_t bfin_lq035q1_irq_error(int irq, void *dev_id) +{ + /*struct bfin_lq035q1fb_info *info = (struct bfin_lq035q1fb_info *)dev_id;*/ + + u16 status = bfin_read_PPI_STATUS(); + bfin_write_PPI_STATUS(-1); + + if (status) { + bfin_lq035q1_disable_ppi(); + disable_dma(CH_PPI); + + /* start dma */ + enable_dma(CH_PPI); + bfin_lq035q1_enable_ppi(); + bfin_write_PPI_STATUS(-1); + } + + return IRQ_HANDLED; +} + +static int __devinit bfin_lq035q1_probe(struct platform_device *pdev) +{ + struct bfin_lq035q1fb_info *info; + struct fb_info *fbinfo; + int ret; + + ret = request_dma(CH_PPI, DRIVER_NAME"_CH_PPI"); + if (ret < 0) { + dev_err(&pdev->dev, "PPI DMA unavailable\n"); + goto out1; + } + + fbinfo = framebuffer_alloc(sizeof(*info), &pdev->dev); + if (!fbinfo) { + ret = -ENOMEM; + goto out2; + } + + info = fbinfo->par; + info->fb = fbinfo; + info->dev = &pdev->dev; + + info->disp_info = pdev->dev.platform_data; + + platform_set_drvdata(pdev, fbinfo); + + strcpy(fbinfo->fix.id, DRIVER_NAME); + + fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; + fbinfo->fix.type_aux = 0; + fbinfo->fix.xpanstep = 0; + fbinfo->fix.ypanstep = 0; + fbinfo->fix.ywrapstep = 0; + fbinfo->fix.accel = FB_ACCEL_NONE; + fbinfo->fix.visual = FB_VISUAL_TRUECOLOR; + + fbinfo->var.nonstd = 0; + fbinfo->var.activate = FB_ACTIVATE_NOW; + fbinfo->var.height = -1; + fbinfo->var.width = -1; + fbinfo->var.accel_flags = 0; + fbinfo->var.vmode = FB_VMODE_NONINTERLACED; + + fbinfo->var.xres = LCD_X_RES; + fbinfo->var.xres_virtual = LCD_X_RES; + fbinfo->var.yres = LCD_Y_RES; + fbinfo->var.yres_virtual = LCD_Y_RES; + fbinfo->var.bits_per_pixel = LCD_BPP; + + if (info->disp_info->mode & LQ035_BGR) { +#if (LCD_BPP == 24) + fbinfo->var.red.offset = 0; + fbinfo->var.green.offset = 8; + fbinfo->var.blue.offset = 16; +#else + fbinfo->var.red.offset = 0; + fbinfo->var.green.offset = 5; + fbinfo->var.blue.offset = 11; +#endif + } else { +#if (LCD_BPP == 24) + fbinfo->var.red.offset = 16; + fbinfo->var.green.offset = 8; + fbinfo->var.blue.offset = 0; +#else + fbinfo->var.red.offset = 11; + fbinfo->var.green.offset = 5; + fbinfo->var.blue.offset = 0; +#endif + } + + fbinfo->var.transp.offset = 0; + +#if (LCD_BPP == 24) + fbinfo->var.red.length = 8; + fbinfo->var.green.length = 8; + fbinfo->var.blue.length = 8; +#else + fbinfo->var.red.length = 5; + fbinfo->var.green.length = 6; + fbinfo->var.blue.length = 5; +#endif + + fbinfo->var.transp.length = 0; + + fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8 + + ACTIVE_VIDEO_MEM_OFFSET; + + fbinfo->fix.line_length = fbinfo->var.xres_virtual * + fbinfo->var.bits_per_pixel / 8; + + + fbinfo->fbops = &bfin_lq035q1_fb_ops; + fbinfo->flags = FBINFO_FLAG_DEFAULT; + + info->fb_buffer = + dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle, + GFP_KERNEL); + + if (NULL == info->fb_buffer) { + dev_err(&pdev->dev, "couldn't allocate dma buffer\n"); + ret = -ENOMEM; + goto out3; + } + + fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; + fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; + + fbinfo->fbops = &bfin_lq035q1_fb_ops; + + fbinfo->pseudo_palette = &info->pseudo_pal; + + ret = fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0); + if (ret < 0) { + dev_err(&pdev->dev, "failed to allocate colormap (%d entries)\n", + BFIN_LCD_NBR_PALETTE_ENTRIES); + goto out4; + } + + ret = bfin_lq035q1_request_ports(pdev); + if (ret) { + dev_err(&pdev->dev, "couldn't request gpio port\n"); + goto out6; + } + + info->irq = platform_get_irq(pdev, 0); + if (info->irq < 0) { + ret = -EINVAL; + goto out7; + } + + ret = request_irq(info->irq, bfin_lq035q1_irq_error, IRQF_DISABLED, + DRIVER_NAME" PPI ERROR", info); + if (ret < 0) { + dev_err(&pdev->dev, "unable to request PPI ERROR IRQ\n"); + goto out7; + } + + info->spidrv.driver.name = DRIVER_NAME"-spi"; + info->spidrv.probe = lq035q1_spidev_probe; + info->spidrv.remove = __devexit_p(lq035q1_spidev_remove); + info->spidrv.shutdown = lq035q1_spidev_shutdown; + info->spidrv.suspend = lq035q1_spidev_suspend; + info->spidrv.resume = lq035q1_spidev_resume; + + ret = spi_register_driver(&info->spidrv); + if (ret < 0) { + dev_err(&pdev->dev, "couldn't register SPI Interface\n"); + goto out8; + } + + if (info->disp_info->use_bl) { + ret = gpio_request(info->disp_info->gpio_bl, "LQ035 Backlight"); + + if (ret) { + dev_err(&pdev->dev, "failed to request GPIO %d\n", + info->disp_info->gpio_bl); + goto out9; + } + gpio_direction_output(info->disp_info->gpio_bl, 0); + } + + ret = register_framebuffer(fbinfo); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register framebuffer\n"); + goto out10; + } + + dev_info(&pdev->dev, "%dx%d %d-bit RGB FrameBuffer initialized\n", + LCD_X_RES, LCD_Y_RES, LCD_BPP); + + return 0; + + out10: + if (info->disp_info->use_bl) + gpio_free(info->disp_info->gpio_bl); + out9: + spi_unregister_driver(&info->spidrv); + out8: + free_irq(info->irq, info); + out7: + bfin_lq035q1_free_ports(); + out6: + fb_dealloc_cmap(&fbinfo->cmap); + out4: + dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer, + info->dma_handle); + out3: + framebuffer_release(fbinfo); + out2: + free_dma(CH_PPI); + out1: + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int __devexit bfin_lq035q1_remove(struct platform_device *pdev) +{ + struct fb_info *fbinfo = platform_get_drvdata(pdev); + struct bfin_lq035q1fb_info *info = fbinfo->par; + + if (info->disp_info->use_bl) + gpio_free(info->disp_info->gpio_bl); + + spi_unregister_driver(&info->spidrv); + + unregister_framebuffer(fbinfo); + + free_dma(CH_PPI); + free_irq(info->irq, info); + + if (info->fb_buffer != NULL) + dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer, + info->dma_handle); + + fb_dealloc_cmap(&fbinfo->cmap); + + bfin_lq035q1_free_ports(); + + platform_set_drvdata(pdev, NULL); + framebuffer_release(fbinfo); + + dev_info(&pdev->dev, "unregistered LCD driver\n"); + + return 0; +} + +#ifdef CONFIG_PM +static int bfin_lq035q1_suspend(struct device *dev) +{ + struct fb_info *fbinfo = dev_get_drvdata(dev); + struct bfin_lq035q1fb_info *info = fbinfo->par; + + if (info->lq035_open_cnt) { + lq035q1_backlight(info, 0); + bfin_lq035q1_disable_ppi(); + SSYNC(); + disable_dma(CH_PPI); + bfin_lq035q1_stop_timers(); + bfin_write_PPI_STATUS(-1); + } + + return 0; +} + +static int bfin_lq035q1_resume(struct device *dev) +{ + struct fb_info *fbinfo = dev_get_drvdata(dev); + struct bfin_lq035q1fb_info *info = fbinfo->par; + + if (info->lq035_open_cnt) { + bfin_lq035q1_disable_ppi(); + SSYNC(); + + bfin_lq035q1_config_dma(info); + bfin_lq035q1_config_ppi(info); + bfin_lq035q1_init_timers(); + + /* start dma */ + enable_dma(CH_PPI); + bfin_lq035q1_enable_ppi(); + bfin_lq035q1_start_timers(); + lq035q1_backlight(info, 1); + } + + return 0; +} + +static struct dev_pm_ops bfin_lq035q1_dev_pm_ops = { + .suspend = bfin_lq035q1_suspend, + .resume = bfin_lq035q1_resume, +}; +#endif + +static struct platform_driver bfin_lq035q1_driver = { + .probe = bfin_lq035q1_probe, + .remove = __devexit_p(bfin_lq035q1_remove), + .driver = { + .name = DRIVER_NAME, +#ifdef CONFIG_PM + .pm = &bfin_lq035q1_dev_pm_ops, +#endif + }, +}; + +static int __init bfin_lq035q1_driver_init(void) +{ + return platform_driver_register(&bfin_lq035q1_driver); +} +module_init(bfin_lq035q1_driver_init); + +static void __exit bfin_lq035q1_driver_cleanup(void) +{ + platform_driver_unregister(&bfin_lq035q1_driver); +} +module_exit(bfin_lq035q1_driver_cleanup); + +MODULE_DESCRIPTION("Blackfin TFT LCD Driver"); +MODULE_LICENSE("GPL");