mirror of
https://github.com/adulau/aha.git
synced 2024-12-27 19:26:25 +00:00
powerpc/86xx: Add power management support for MPC8610HPCD boards
This patch adds needed nodes and properties to support suspend/resume on the MPC8610HPCD boards. There is a dedicated switch (SW9) that is used to wake up the boards. By default the SW9 button is routed to IRQ8, but could be re-routed (via PIXIS) to sreset. With 'no_console_suspend' kernel command line argument specified, the board is also able to wakeup upon serial port input. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> [dts] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Anton Vorontsov
Kumar Gala
parent
3cfee0aaa1
commit
8c68e2f788
3 changed files with 74 additions and 4 deletions
|
|
@ -20,12 +20,16 @@ Required properities:
|
|||
- compatible : should be "fsl,fpga-pixis".
|
||||
- reg : should contain the address and the length of the FPPGA register
|
||||
set.
|
||||
- interrupt-parent: should specify phandle for the interrupt controller.
|
||||
- interrupts : should specify event (wakeup) IRQ.
|
||||
|
||||
Example (MPC8610HPCD):
|
||||
|
||||
board-control@e8000000 {
|
||||
compatible = "fsl,fpga-pixis";
|
||||
reg = <0xe8000000 32>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <8 8>;
|
||||
};
|
||||
|
||||
* Freescale BCSR GPIO banks
|
||||
|
|
|
|||
|
|
@ -35,6 +35,8 @@
|
|||
i-cache-line-size = <32>;
|
||||
d-cache-size = <32768>; // L1
|
||||
i-cache-size = <32768>; // L1
|
||||
sleep = <&pmc 0x00008000 0 // core
|
||||
&pmc 0x00004000 0>; // timebase
|
||||
timebase-frequency = <0>; // From uboot
|
||||
bus-frequency = <0>; // From uboot
|
||||
clock-frequency = <0>; // From uboot
|
||||
|
|
@ -60,6 +62,7 @@
|
|||
5 0 0xe8480000 0x00008000
|
||||
6 0 0xe84c0000 0x00008000
|
||||
3 0 0xe8000000 0x00000020>;
|
||||
sleep = <&pmc 0x08000000 0>;
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "cfi-flash";
|
||||
|
|
@ -105,6 +108,8 @@
|
|||
compatible = "fsl,fpga-pixis";
|
||||
reg = <3 0 0x20>;
|
||||
ranges = <0 3 0 0x20>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <8 8>;
|
||||
|
||||
sdcsr_pio: gpio-controller@a {
|
||||
#gpio-cells = <2>;
|
||||
|
|
@ -163,6 +168,7 @@
|
|||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
sleep = <&pmc 0x00000004 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
|
|
@ -174,6 +180,7 @@
|
|||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
sleep = <&pmc 0x00000002 0>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
|
|
@ -184,6 +191,7 @@
|
|||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
sleep = <&pmc 0x00000008 0>;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
|
|
@ -196,6 +204,7 @@
|
|||
interrupt-parent = <&mpic>;
|
||||
mode = "cpu";
|
||||
gpios = <&sdcsr_pio 7 0>;
|
||||
sleep = <&pmc 0x00000800 0>;
|
||||
|
||||
mmc-slot@0 {
|
||||
compatible = "fsl,mpc8610hpcd-mmc-slot",
|
||||
|
|
@ -213,6 +222,7 @@
|
|||
reg = <0x2c000 100>;
|
||||
interrupts = <72 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
sleep = <&pmc 0x04000000 0>;
|
||||
};
|
||||
|
||||
mpic: interrupt-controller@40000 {
|
||||
|
|
@ -241,9 +251,18 @@
|
|||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8610-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
ranges = <0 0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
|
||||
pmc: power@70 {
|
||||
compatible = "fsl,mpc8610-pmc",
|
||||
"fsl,mpc8641d-pmc";
|
||||
reg = <0x70 0x20>;
|
||||
};
|
||||
};
|
||||
|
||||
wdt@e4000 {
|
||||
|
|
@ -262,6 +281,7 @@
|
|||
fsl,playback-dma = <&dma00>;
|
||||
fsl,capture-dma = <&dma01>;
|
||||
fsl,fifo-depth = <8>;
|
||||
sleep = <&pmc 0 0x08000000>;
|
||||
};
|
||||
|
||||
ssi@16100 {
|
||||
|
|
@ -271,6 +291,7 @@
|
|||
interrupt-parent = <&mpic>;
|
||||
interrupts = <63 2>;
|
||||
fsl,fifo-depth = <8>;
|
||||
sleep = <&pmc 0 0x04000000>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
|
|
@ -280,6 +301,7 @@
|
|||
cell-index = <0>;
|
||||
reg = <0x21300 0x4>; /* DMA general status register */
|
||||
ranges = <0x0 0x21100 0x200>;
|
||||
sleep = <&pmc 0x00000400 0>;
|
||||
|
||||
dma00: dma-channel@0 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
|
|
@ -322,6 +344,7 @@
|
|||
cell-index = <1>;
|
||||
reg = <0xc300 0x4>; /* DMA general status register */
|
||||
ranges = <0x0 0xc100 0x200>;
|
||||
sleep = <&pmc 0x00000200 0>;
|
||||
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
|
|
@ -369,6 +392,7 @@
|
|||
bus-range = <0 0>;
|
||||
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
||||
0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
|
||||
sleep = <&pmc 0x80000000 0>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <24 2>;
|
||||
|
|
@ -398,6 +422,7 @@
|
|||
bus-range = <1 3>;
|
||||
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
|
||||
0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
|
||||
sleep = <&pmc 0x40000000 0>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <26 2>;
|
||||
|
|
@ -474,6 +499,7 @@
|
|||
0x0000 0 0 4 &mpic 7 1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <25 2>;
|
||||
sleep = <&pmc 0x20000000 0>;
|
||||
clock-frequency = <33333333>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@
|
|||
#include <linux/stddef.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kdev_t.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/seq_file.h>
|
||||
|
|
@ -41,10 +42,46 @@
|
|||
|
||||
#include "mpc86xx.h"
|
||||
|
||||
static struct device_node *pixis_node;
|
||||
static unsigned char *pixis_bdcfg0, *pixis_arch;
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
static irqreturn_t mpc8610_sw9_irq(int irq, void *data)
|
||||
{
|
||||
pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void __init mpc8610_suspend_init(void)
|
||||
{
|
||||
int irq;
|
||||
int ret;
|
||||
|
||||
if (!pixis_node)
|
||||
return;
|
||||
|
||||
irq = irq_of_parse_and_map(pixis_node, 0);
|
||||
if (!irq) {
|
||||
pr_err("%s: can't map pixis event IRQ.\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL);
|
||||
if (ret) {
|
||||
pr_err("%s: can't request pixis event IRQ: %d\n",
|
||||
__func__, ret);
|
||||
irq_dispose_mapping(irq);
|
||||
}
|
||||
|
||||
enable_irq_wake(irq);
|
||||
}
|
||||
#else
|
||||
static inline void mpc8610_suspend_init(void) { }
|
||||
#endif /* CONFIG_SUSPEND */
|
||||
|
||||
static struct of_device_id __initdata mpc8610_ids[] = {
|
||||
{ .compatible = "fsl,mpc8610-immr", },
|
||||
{ .compatible = "fsl,mpc8610-guts", },
|
||||
{ .compatible = "simple-bus", },
|
||||
{ .compatible = "gianfar", },
|
||||
{}
|
||||
|
|
@ -55,6 +92,9 @@ static int __init mpc8610_declare_of_platform_devices(void)
|
|||
/* Firstly, register PIXIS GPIOs. */
|
||||
simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
|
||||
|
||||
/* Enable wakeup on PIXIS' event IRQ. */
|
||||
mpc8610_suspend_init();
|
||||
|
||||
/* Without this call, the SSI device driver won't get probed. */
|
||||
of_platform_bus_probe(NULL, mpc8610_ids, NULL);
|
||||
|
||||
|
|
@ -250,10 +290,10 @@ static void __init mpc86xx_hpcd_setup_arch(void)
|
|||
diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
|
||||
#endif
|
||||
|
||||
np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
|
||||
if (np) {
|
||||
of_address_to_resource(np, 0, &r);
|
||||
of_node_put(np);
|
||||
pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
|
||||
if (pixis_node) {
|
||||
of_address_to_resource(pixis_node, 0, &r);
|
||||
of_node_put(pixis_node);
|
||||
pixis = ioremap(r.start, 32);
|
||||
if (!pixis) {
|
||||
printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
|
||||
|
|
|
|||
Loading…
Reference in a new issue