serial: sh-sci: Handle the general UPF_IOREMAP case.

Presently we don't do much with UPF_IOREMAP other than special case it
for SH-5's onchip_remap() on the early console. Tie this in generically
for platforms that need the remap.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Paul Mundt 2008-10-01 15:46:58 +09:00
parent 62429e0364
commit 7ff731aeba
2 changed files with 37 additions and 18 deletions

View file

@ -3,7 +3,7 @@
*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
* Copyright (C) 2002 - 2006 Paul Mundt
* Copyright (C) 2002 - 2008 Paul Mundt
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
*
* based off of the old drivers/char/sh-sci.c by:
@ -46,6 +46,7 @@
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/ctype.h>
#include <linux/err.h>
#ifdef CONFIG_SUPERH
#include <asm/clock.h>
@ -1145,12 +1146,16 @@ static void sci_config_port(struct uart_port *port, int flags)
break;
}
#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
if (port->mapbase == 0)
if (port->flags & UPF_IOREMAP && !port->membase) {
#if defined(CONFIG_SUPERH64)
port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
port->membase = (void __iomem *)port->mapbase;
port->membase = (void __iomem *)port->mapbase;
#else
port->membase = ioremap_nocache(port->mapbase, 0x40);
#endif
printk(KERN_ERR "sci: can't remap port#%d\n", port->line);
}
}
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
@ -1436,7 +1441,7 @@ static struct uart_driver sci_uart_driver = {
static int __devinit sci_probe(struct platform_device *dev)
{
struct plat_sci_port *p = dev->dev.platform_data;
int i;
int i, ret = -EINVAL;
for (i = 0; p && p->flags != 0; p++, i++) {
struct sci_port *sciport = &sci_ports[i];
@ -1453,12 +1458,22 @@ static int __devinit sci_probe(struct platform_device *dev)
sciport->port.mapbase = p->mapbase;
/*
* For the simple (and majority of) cases where we don't need
* to do any remapping, just cast the cookie directly.
*/
if (p->mapbase && !p->membase && !(p->flags & UPF_IOREMAP))
p->membase = (void __iomem *)p->mapbase;
if (p->mapbase && !p->membase) {
if (p->flags & UPF_IOREMAP) {
p->membase = ioremap_nocache(p->mapbase, 0x40);
if (IS_ERR(p->membase)) {
ret = PTR_ERR(p->membase);
goto err_unreg;
}
} else {
/*
* For the simple (and majority of) cases
* where we don't need to do any remapping,
* just cast the cookie directly.
*/
p->membase = (void __iomem *)p->mapbase;
}
}
sciport->port.membase = p->membase;
@ -1489,6 +1504,12 @@ static int __devinit sci_probe(struct platform_device *dev)
#endif
return 0;
err_unreg:
for (i = i - 1; i >= 0; i--)
uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
return ret;
}
static int __devexit sci_remove(struct platform_device *dev)

View file

@ -320,18 +320,16 @@
#define SCI_EVENT_WRITE_WAKEUP 0
#define SCI_IN(size, offset) \
unsigned int addr = port->mapbase + (offset); \
if ((size) == 8) { \
return ctrl_inb(addr); \
return ioread8(port->membase + (offset)); \
} else { \
return ctrl_inw(addr); \
return ioread16(port->membase + (offset)); \
}
#define SCI_OUT(size, offset, value) \
unsigned int addr = port->mapbase + (offset); \
if ((size) == 8) { \
ctrl_outb(value, addr); \
iowrite8(value, port->membase + (offset)); \
} else if ((size) == 16) { \
ctrl_outw(value, addr); \
iowrite16(value, port->membase + (offset)); \
}
#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\