adulau/aha
1
0
Fork 0
mirror of https://github.com/adulau/aha.git synced 2024-12-27 19:26:25 +00:00
Code Issues Projects Releases Packages Wiki Activity

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

Browse source 
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...
This commit is contained in:
Linus Torvalds 2009-09-18 09:19:26 -07:00
commit 73c583e4e2
103 changed files with 7776 additions and 718 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

129
Documentation/arm/OMAP/omap_pm Normal file
View file

@ -0,0 +1,129 @@
The OMAP PM interface
=====================
This document describes the temporary OMAP PM interface. Driver
authors use these functions to communicate minimum latency or
throughput constraints to the kernel power management code.
Over time, the intention is to merge features from the OMAP PM
interface into the Linux PM QoS code.
Drivers need to express PM parameters which:
- support the range of power management parameters present in the TI SRF;
- separate the drivers from the underlying PM parameter
implementation, whether it is the TI SRF or Linux PM QoS or Linux
latency framework or something else;
- specify PM parameters in terms of fundamental units, such as
latency and throughput, rather than units which are specific to OMAP
or to particular OMAP variants;
- allow drivers which are shared with other architectures (e.g.,
DaVinci) to add these constraints in a way which won't affect non-OMAP
systems,
- can be implemented immediately with minimal disruption of other
architectures.
This document proposes the OMAP PM interface, including the following
five power management functions for driver code:
1. Set the maximum MPU wakeup latency:
(*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t)
2. Set the maximum device wakeup latency:
(*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t)
3. Set the maximum system DMA transfer start latency (CORE pwrdm):
(*pdata->set_max_sdma_lat)(struct device *dev, long t)
4. Set the minimum bus throughput needed by a device:
(*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r)
5. Return the number of times the device has lost context
(*pdata->get_dev_context_loss_count)(struct device *dev)
Further documentation for all OMAP PM interface functions can be
found in arch/arm/plat-omap/include/mach/omap-pm.h.
The OMAP PM layer is intended to be temporary
---------------------------------------------
The intention is that eventually the Linux PM QoS layer should support
the range of power management features present in OMAP3. As this
happens, existing drivers using the OMAP PM interface can be modified
to use the Linux PM QoS code; and the OMAP PM interface can disappear.
Driver usage of the OMAP PM functions
-------------------------------------
As the 'pdata' in the above examples indicates, these functions are
exposed to drivers through function pointers in driver .platform_data
structures. The function pointers are initialized by the board-*.c
files to point to the corresponding OMAP PM functions:
.set_max_dev_wakeup_lat will point to
omap_pm_set_max_dev_wakeup_lat(), etc. Other architectures which do
not support these functions should leave these function pointers set
to NULL. Drivers should use the following idiom:
if (pdata->set_max_dev_wakeup_lat)
(*pdata->set_max_dev_wakeup_lat)(dev, t);
The most common usage of these functions will probably be to specify
the maximum time from when an interrupt occurs, to when the device
becomes accessible. To accomplish this, driver writers should use the
set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup
latency, and the set_max_dev_wakeup_lat() function to constrain the
device wakeup latency (from clk_enable() to accessibility). For
example,
/* Limit MPU wakeup latency */
if (pdata->set_max_mpu_wakeup_lat)
(*pdata->set_max_mpu_wakeup_lat)(dev, tc);
/* Limit device powerdomain wakeup latency */
if (pdata->set_max_dev_wakeup_lat)
(*pdata->set_max_dev_wakeup_lat)(dev, td);
/* total wakeup latency in this example: (tc + td) */
The PM parameters can be overwritten by calling the function again
with the new value. The settings can be removed by calling the
function with a t argument of -1 (except in the case of
set_max_bus_tput(), which should be called with an r argument of 0).
The fifth function above, omap_pm_get_dev_context_loss_count(),
is intended as an optimization to allow drivers to determine whether the
device has lost its internal context. If context has been lost, the
driver must restore its internal context before proceeding.
Other specialized interface functions
-------------------------------------
The five functions listed above are intended to be usable by any
device driver. DSPBridge and CPUFreq have a few special requirements.
DSPBridge expresses target DSP performance levels in terms of OPP IDs.
CPUFreq expresses target MPU performance levels in terms of MPU
frequency. The OMAP PM interface contains functions for these
specialized cases to convert that input information (OPPs/MPU
frequency) into the form that the underlying power management
implementation needs:
6. (*pdata->dsp_get_opp_table)(void)
7. (*pdata->dsp_set_min_opp)(u8 opp_id)
8. (*pdata->dsp_get_opp)(void)
9. (*pdata->cpu_get_freq_table)(void)
10. (*pdata->cpu_set_freq)(unsigned long f)
11. (*pdata->cpu_get_freq)(void)

1104
arch/arm/configs/n8x0_defconfig Normal file
View file

File diff suppressed because it is too large Load diff

41
arch/arm/configs/omap3_beagle_defconfig
View file

@ -128,6 +128,7 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# System Type
@ -236,6 +237,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
# CONFIG_OUTER_CACHE is not set
CONFIG_COMMON_CLKDEV=y
#
# Bus support
@ -317,7 +319,12 @@ CONFIG_BINFMT_MISC=y
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@ -713,6 +720,7 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
#
# PCI GPIO expanders:
@ -741,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
@ -787,7 +796,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@ -798,7 +807,8 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
@ -806,6 +816,8 @@ CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
@ -818,10 +830,10 @@ CONFIG_USB_MUSB_SOC=y
#
# OMAP 343x high speed USB support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_INVENTRA_DMA=y
@ -887,8 +899,8 @@ CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA25X is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
@ -906,6 +918,15 @@ CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@ -923,6 +944,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
@ -981,10 +1003,11 @@ CONFIG_RTC_INTF_DEV=y
#
# Voltage and Current regulators
#
# CONFIG_REGULATOR is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_UIO is not set
#

20
arch/arm/configs/omap_3430sdp_defconfig
View file

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc8
# Fri Mar 13 14:17:01 2009
# Linux kernel version: 2.6.30-omap1
# Tue Jun 23 10:36:45 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@ -197,9 +197,9 @@ CONFIG_OMAP_MCBSP=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
# CONFIG_OMAP_LL_DEBUG_UART1 is not set
CONFIG_OMAP_LL_DEBUG_UART1=y
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
CONFIG_OMAP_LL_DEBUG_UART3=y
# CONFIG_OMAP_LL_DEBUG_UART3 is not set
CONFIG_OMAP_SERIAL_WAKE=y
CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
@ -207,10 +207,10 @@ CONFIG_ARCH_OMAP3430=y
#
# OMAP Board Type
#
CONFIG_MACH_OMAP3_BEAGLE=y
CONFIG_MACH_OMAP_LDP=y
CONFIG_MACH_OVERO=y
CONFIG_MACH_OMAP3_PANDORA=y
# CONFIG_MACH_OMAP3_BEAGLE is not set
# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OVERO is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
CONFIG_MACH_OMAP_3430SDP=y
#
@ -950,7 +950,7 @@ CONFIG_SPI_OMAP24XX=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
@ -1370,7 +1370,7 @@ CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_MCBSP=y
# CONFIG_SND_OMAP_SOC_OVERO is not set
CONFIG_SND_OMAP_SOC_SDP3430=y
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_TWL4030=y

484
arch/arm/configs/omap_zoom2_defconfig
View file

File diff suppressed because it is too large Load diff

1
arch/arm/configs/rx51_defconfig
View file

@ -1006,6 +1006,7 @@ CONFIG_WATCHDOG=y
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
#
# USB-based Watchdog Cards

43
arch/arm/mach-omap1/board-ams-delta.c
View file

@ -15,8 +15,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -162,10 +165,6 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
static struct omap_usb_config ams_delta_usb_config __initdata = {
.register_host = 1,
.hmc_mode = 16,
@ -174,7 +173,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
{ OMAP_TAG_UART, &ams_delta_uart_config },
};
static struct resource ams_delta_kp_resources[] = {
@ -235,6 +233,41 @@ static void __init ams_delta_init(void)
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
.membase = (void *) AMS_DELTA_MODEM_VIRT,
.mapbase = AMS_DELTA_MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = BASE_BAUD * 16,
},
{ },
};
static struct platform_device ams_delta_modem_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = ams_delta_modem_ports,
},
};
static int __init ams_delta_modem_init(void)
{
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq = gpio_to_irq(2);
ams_delta_latch2_write(
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
return platform_device_register(&ams_delta_modem_device);
}
arch_initcall(ams_delta_modem_init);
static void __init ams_delta_map_io(void)
{
omap1_map_common_io();

5
arch/arm/mach-omap1/board-fsample.c
View file

@ -240,16 +240,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
static struct omap_uart_config fsample_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1)),
};
static struct omap_lcd_config fsample_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel fsample_config[] = {
{ OMAP_TAG_UART, &fsample_uart_config },
{ OMAP_TAG_LCD, &fsample_lcd_config },
};

5
arch/arm/mach-omap1/board-generic.c
View file

@ -57,12 +57,7 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
};
#endif
static struct omap_uart_config generic_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel generic_config[] __initdata = {
{ OMAP_TAG_UART, &generic_uart_config },
};
static void __init omap_generic_init(void)

5
arch/arm/mach-omap1/board-h2.c
View file

@ -360,16 +360,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_uart_config h2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config h2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_UART, &h2_uart_config },
{ OMAP_TAG_LCD, &h2_lcd_config },
};

5
arch/arm/mach-omap1/board-h3.c
View file

@ -313,16 +313,11 @@ static struct omap_usb_config h3_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_uart_config h3_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config h3_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h3_config[] __initdata = {
{ OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};

5
arch/arm/mach-omap1/board-innovator.c
View file

@ -368,13 +368,8 @@ static inline void innovator_mmc_init(void)
}
#endif
static struct omap_uart_config innovator_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel innovator_config[] = {
{ OMAP_TAG_LCD, NULL },
{ OMAP_TAG_UART, &innovator_uart_config },
};
static void __init innovator_init(void)

5
arch/arm/mach-omap1/board-osk.c
View file

@ -293,10 +293,6 @@ static struct omap_usb_config osk_usb_config __initdata = {
.pins[0] = 2,
};
static struct omap_uart_config osk_uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
#ifdef CONFIG_OMAP_OSK_MISTRAL
static struct omap_lcd_config osk_lcd_config __initdata = {
.ctrl_name = "internal",
@ -304,7 +300,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
#endif
static struct omap_board_config_kernel osk_config[] __initdata = {
{ OMAP_TAG_UART, &osk_uart_config },
#ifdef CONFIG_OMAP_OSK_MISTRAL
{ OMAP_TAG_LCD, &osk_lcd_config },
#endif

5
arch/arm/mach-omap1/board-palmte.c
View file

@ -212,10 +212,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config palmte_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
#ifdef CONFIG_APM
/*
* Values measured in 10 minute intervals averaged over 10 samples.
@ -302,7 +298,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_LCD, &palmte_lcd_config },
{ OMAP_TAG_UART, &palmte_uart_config },
};
static struct spi_board_info palmte_spi_info[] __initdata = {

5
arch/arm/mach-omap1/board-palmtt.c
View file

@ -274,13 +274,8 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config palmtt_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
static struct omap_board_config_kernel palmtt_config[] __initdata = {
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
};
static void __init omap_mpu_wdt_mode(int mode) {

5
arch/arm/mach-omap1/board-palmz71.c
View file

@ -244,13 +244,8 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_uart_config palmz71_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
static struct omap_board_config_kernel palmz71_config[] __initdata = {
{OMAP_TAG_LCD, &palmz71_lcd_config},
{OMAP_TAG_UART, &palmz71_uart_config},
};
static irqreturn_t

5
arch/arm/mach-omap1/board-perseus2.c
View file

@ -208,16 +208,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
return gpio_get_value(P2_NAND_RB_GPIO_PIN);
}
static struct omap_uart_config perseus2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1)),
};
static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel perseus2_config[] __initdata = {
{ OMAP_TAG_UART, &perseus2_uart_config },
{ OMAP_TAG_LCD, &perseus2_lcd_config },
};

5
arch/arm/mach-omap1/board-sx1.c
View file

@ -369,13 +369,8 @@ static struct platform_device *sx1_devices[] __initdata = {
};
/*-----------------------------------------*/
static struct omap_uart_config sx1_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
/*-----------------------------------------*/

5
arch/arm/mach-omap1/board-voiceblue.c
View file

@ -140,12 +140,7 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
.pins[2] = 6,
};
static struct omap_uart_config voiceblue_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel voiceblue_config[] = {
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
static void __init voiceblue_init_irq(void)

2
arch/arm/mach-omap1/devices.c
View file

@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
# define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1
#endif
#define OMAP1_MBOX_BASE IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
#define OMAP1_MBOX_BASE OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
static struct resource mbox_resources[] = {
{

6
arch/arm/mach-omap1/io.c
View file

@ -29,9 +29,9 @@ extern void omapfb_reserve_sdram(void);
*/
static struct map_desc omap_io_desc[] __initdata = {
{
.virtual = IO_VIRT,
.pfn = __phys_to_pfn(IO_PHYS),
.length = IO_SIZE,
.virtual = OMAP1_IO_VIRT,
.pfn = __phys_to_pfn(OMAP1_IO_PHYS),
.length = OMAP1_IO_SIZE,
.type = MT_DEVICE
}
};

4
arch/arm/mach-omap1/pm.h
View file

@ -39,11 +39,11 @@
* Register and offset definitions to be used in PM assembler code
* ----------------------------------------------------------------------------
*/
#define CLKGEN_REG_ASM_BASE IO_ADDRESS(0xfffece00)
#define CLKGEN_REG_ASM_BASE OMAP1_IO_ADDRESS(0xfffece00)
#define ARM_IDLECT1_ASM_OFFSET 0x04
#define ARM_IDLECT2_ASM_OFFSET 0x08
#define TCMIF_ASM_BASE IO_ADDRESS(0xfffecc00)
#define TCMIF_ASM_BASE OMAP1_IO_ADDRESS(0xfffecc00)
#define EMIFS_CONFIG_ASM_OFFSET 0x0c
#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20

17
arch/arm/mach-omap1/serial.c
View file

@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.irq = INT_UART1,
.flags = UPF_BOOT_AUTOCONF,
@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = INT_UART2,
.flags = UPF_BOOT_AUTOCONF,
@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.uartclk = OMAP16XX_BASE_BAUD * 16,
},
{
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = INT_UART3,
.flags = UPF_BOOT_AUTOCONF,
@ -109,7 +109,6 @@ static struct platform_device serial_device = {
void __init omap_serial_init(void)
{
int i;
const struct omap_uart_config *info;
if (cpu_is_omap730()) {
serial_platform_data[0].regshift = 0;
@ -131,19 +130,9 @@ void __init omap_serial_init(void)
serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
}
info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
if (info == NULL)
return;
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
unsigned char reg;
if (!((1 << i) & info->enabled_uarts)) {
serial_platform_data[i].membase = NULL;
serial_platform_data[i].mapbase = 0;
continue;
}
switch (i) {
case 0:
uart1_ck = clk_get(NULL, "uart1_ck");

12
arch/arm/mach-omap1/sram.S
View file

@ -21,13 +21,13 @@
ENTRY(omap1_sram_reprogram_clock)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
orr r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
mov r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
mov r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
orr r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
mov r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
tst r0, #1 << 4 @ want lock mode?
beq newck @ nope

4
arch/arm/mach-omap1/time.c
View file

@ -62,8 +62,8 @@ typedef struct {
u32 read_tim; /* READ_TIM, R */
} omap_mpu_timer_regs_t;
#define omap_mpu_timer_base(n) \
((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
#define omap_mpu_timer_base(n) \
((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long omap_mpu_timer_read(int nr)

9
arch/arm/mach-omap2/Kconfig
View file

@ -31,6 +31,11 @@ config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
config MACH_OMAP2_TUSB6010
bool
depends on ARCH_OMAP2 && ARCH_OMAP2420
default y if MACH_NOKIA_N8X0
config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
@ -68,6 +73,10 @@ config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on ARCH_OMAP2420
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX

10
arch/arm/mach-omap2/Makefile
View file

@ -5,7 +5,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
omap-2-3-common = irq.o sdrc.o
omap-2-3-common = irq.o sdrc.o omap_hwmod.o
prcm-common = prcm.o powerdomain.o
clock-common = clock.o clockdomain.o
@ -35,6 +35,11 @@ obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
# PRCM
obj-$(CONFIG_ARCH_OMAP2) += cm.o
obj-$(CONFIG_ARCH_OMAP3) += cm.o
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o
@ -62,7 +67,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-peripherals.o \
mmc-twl4030.o
@ -74,6 +79,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
# Platform specific device init code
obj-y += usb-musb.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
obj-y += $(onenand-m) $(onenand-y)

18
arch/arm/mach-omap2/board-2430sdp.c
View file

@ -139,23 +139,19 @@ static inline void board_smc91x_init(void)
#endif
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
static void __init omap_2430sdp_init_irq(void)
{
omap_board_config = sdp2430_config;
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct omap_uart_config sdp2430_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_UART, &sdp2430_uart_config},
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@ -205,8 +201,6 @@ static void __init omap_2430sdp_init(void)
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_board_config = sdp2430_config;
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap_serial_init();
twl4030_mmc_init(mmc);
usb_musb_init();

29
arch/arm/mach-omap2/board-3430sdp.c
View file

@ -167,26 +167,23 @@ static struct platform_device *sdp3430_devices[] __initdata = {
&sdp3430_lcd_device,
};
static void __init omap_3430sdp_init_irq(void)
{
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct omap_uart_config sdp3430_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config sdp3430_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
{ OMAP_TAG_UART, &sdp3430_uart_config },
{ OMAP_TAG_LCD, &sdp3430_lcd_config },
};
static void __init omap_3430sdp_init_irq(void)
{
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
static int sdp3430_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
@ -478,12 +475,15 @@ static inline void board_smc91x_init(void)
#endif
static void enable_board_wakeup_source(void)
{
omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
}
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
if (omap_rev() > OMAP3430_REV_ES1_0)
ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
else
@ -495,6 +495,7 @@ static void __init omap_3430sdp_init(void)
omap_serial_init();
usb_musb_init();
board_smc91x_init();
enable_board_wakeup_source();
}
static void __init omap_3430sdp_map_io(void)

5
arch/arm/mach-omap2/board-4430sdp.c
View file

@ -47,14 +47,13 @@ static struct omap_lcd_config sdp4430_lcd_config __initdata = {
};
static struct omap_board_config_kernel sdp4430_config[] __initdata = {
{ OMAP_TAG_UART, &sdp4430_uart_config },
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
static void __init gic_init_irq(void)
{
gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
}
static void __init omap_4430sdp_init_irq(void)

25
arch/arm/mach-omap2/board-apollon.c
View file

@ -248,18 +248,6 @@ out:
clk_put(gpmc_fck);
}
static void __init omap_apollon_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
}
static struct omap_uart_config apollon_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
};
static struct omap_usb_config apollon_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
@ -272,10 +260,19 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
};
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
static void __init omap_apollon_init_irq(void)
{
omap_board_config = apollon_config;
omap_board_config_size = ARRAY_SIZE(apollon_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
}
static void __init apollon_led_init(void)
{
/* LED0 - AA10 */
@ -324,8 +321,6 @@ static void __init omap_apollon_init(void)
* if not needed.
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_board_config = apollon_config;
omap_board_config_size = ARRAY_SIZE(apollon_config);
omap_serial_init();
}

15
arch/arm/mach-omap2/board-generic.c
View file

@ -31,24 +31,19 @@
#include <mach/board.h>
#include <mach/common.h>
static struct omap_board_config_kernel generic_config[] = {
};
static void __init omap_generic_init_irq(void)
{
omap_board_config = generic_config;
omap_board_config_size = ARRAY_SIZE(generic_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
}
static struct omap_uart_config generic_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel generic_config[] = {
{ OMAP_TAG_UART, &generic_uart_config },
};
static void __init omap_generic_init(void)
{
omap_board_config = generic_config;
omap_board_config_size = ARRAY_SIZE(generic_config);
omap_serial_init();
}

25
arch/arm/mach-omap2/board-h4.c
View file

@ -268,18 +268,6 @@ static void __init h4_init_flash(void)
h4_flash_resource.end = base + SZ_64M - 1;
}
static void __init omap_h4_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
}
static struct omap_uart_config h4_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config h4_lcd_config __initdata = {
.ctrl_name = "internal",
};
@ -318,10 +306,19 @@ static struct omap_usb_config h4_usb_config __initdata = {
};
static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
};
static void __init omap_h4_init_irq(void)
{
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
}
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
@ -366,8 +363,6 @@ static void __init omap_h4_init(void)
ARRAY_SIZE(h4_i2c_board_info));
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
omap_usb_init(&h4_usb_config);
omap_serial_init();
}

25
arch/arm/mach-omap2/board-ldp.c
View file

@ -268,18 +268,6 @@ static inline void __init ldp_init_smsc911x(void)
gpio_direction_input(eth_gpio);
}
static void __init omap_ldp_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smsc911x();
}
static struct omap_uart_config ldp_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct platform_device ldp_lcd_device = {
.name = "ldp_lcd",
.id = -1,
@ -290,10 +278,19 @@ static struct omap_lcd_config ldp_lcd_config __initdata = {
};
static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_UART, &ldp_uart_config },
{ OMAP_TAG_LCD, &ldp_lcd_config },
};
static void __init omap_ldp_init_irq(void)
{
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smsc911x();
}
static struct twl4030_usb_data ldp_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@ -377,8 +374,6 @@ static void __init omap_ldp_init(void)
{
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
ts_gpio = 54;
ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
spi_register_board_info(ldp_spi_board_info,

150
arch/arm/mach-omap2/board-n8x0.c Normal file
View file

@ -0,0 +1,150 @@
/*
* linux/arch/arm/mach-omap2/board-n8x0.c
*
* Copyright (C) 2005-2009 Nokia Corporation
* Author: Juha Yrjola <juha.yrjola@nokia.com>
*
* Modified from mach-omap2/board-generic.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/stddef.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/mcspi.h>
#include <mach/onenand.h>
#include <mach/serial.h>
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
};
static struct spi_board_info n800_spi_board_info[] __initdata = {
{
.modalias = "p54spi",
.bus_num = 2,
.chip_select = 0,
.max_speed_hz = 48000000,
.controller_data = &p54spi_mcspi_config,
},
};
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
static struct mtd_partition onenand_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = 0x20000,
.mask_flags = MTD_WRITEABLE, /* Force read-only */
},
{
.name = "config",
.offset = MTDPART_OFS_APPEND,
.size = 0x60000,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 0x200000,
},
{
.name = "initfs",
.offset = MTDPART_OFS_APPEND,
.size = 0x400000,
},
{
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct omap_onenand_platform_data board_onenand_data = {
.cs = 0,
.gpio_irq = 26,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
.flags = ONENAND_SYNC_READ,
};
static void __init n8x0_onenand_init(void)
{
gpmc_onenand_init(&board_onenand_data);
}
#else
static void __init n8x0_onenand_init(void) {}
#endif
static void __init n8x0_map_io(void)
{
omap2_set_globals_242x();
omap2_map_common_io();
}
static void __init n8x0_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static void __init n8x0_init_machine(void)
{
/* FIXME: add n810 spi devices */
spi_register_board_info(n800_spi_board_info,
ARRAY_SIZE(n800_spi_board_info));
omap_serial_init();
n8x0_onenand_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = n8x0_map_io,
.init_irq = n8x0_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
MACHINE_END

36
arch/arm/mach-omap2/board-omap3beagle.c
View file

@ -108,10 +108,6 @@ static struct platform_device omap3beagle_nand_device = {
#include "sdram-micron-mt46h32m32lf-6.h"
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
@ -249,11 +245,16 @@ static struct regulator_init_data beagle_vpll2 = {
.consumer_supplies = &beagle_vdvi_supply,
};
static struct twl4030_usb_data beagle_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
@ -280,17 +281,6 @@ static int __init omap3_beagle_i2c_init(void)
return 0;
}
static void __init omap3_beagle_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}
static struct gpio_led gpio_leds[] = {
{
.name = "beagleboard::usr0",
@ -345,10 +335,22 @@ static struct platform_device keys_gpio = {
};
static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
{ OMAP_TAG_UART, &omap3_beagle_uart_config },
{ OMAP_TAG_LCD, &omap3_beagle_lcd_config },
};
static void __init omap3_beagle_init_irq(void)
{
omap_board_config = omap3_beagle_config;
omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
&omap3_beagle_lcd_device,
&leds_gpio,
@ -398,8 +400,6 @@ static void __init omap3_beagle_init(void)
omap3_beagle_i2c_init();
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_board_config = omap3_beagle_config;
omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
omap_serial_init();
omap_cfg_reg(J25_34XX_GPIO170);

17
arch/arm/mach-omap2/board-omap3evm.c
View file

@ -92,10 +92,6 @@ static inline void __init omap3evm_init_smc911x(void)
gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
}
static struct omap_uart_config omap3_evm_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
@ -278,19 +274,20 @@ struct spi_board_info omap3evm_spi_board_info[] = {
},
};
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
{ OMAP_TAG_LCD, &omap3_evm_lcd_config },
};
static void __init omap3_evm_init_irq(void)
{
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
omap3evm_init_smc911x();
}
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
{ OMAP_TAG_UART, &omap3_evm_uart_config },
{ OMAP_TAG_LCD, &omap3_evm_lcd_config },
};
static struct platform_device *omap3_evm_devices[] __initdata = {
&omap3_evm_lcd_device,
&omap3evm_smc911x_device,
@ -301,8 +298,6 @@ static void __init omap3_evm_init(void)
omap3_evm_i2c_init();
platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
spi_register_board_info(omap3evm_spi_board_info,
ARRAY_SIZE(omap3evm_spi_board_info));

25
arch/arm/mach-omap2/board-omap3pandora.c
View file

@ -213,10 +213,6 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
{} /* Terminator */
};
static struct omap_uart_config omap3pandora_uart_config __initdata = {
.enabled_uarts = (1 << 2), /* UART3 */
};
static struct regulator_consumer_supply pandora_vmmc1_supply = {
.supply = "vmmc",
};
@ -309,14 +305,6 @@ static int __init omap3pandora_i2c_init(void)
return 0;
}
static void __init omap3pandora_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static void __init omap3pandora_ads7846_init(void)
{
int gpio = OMAP3_PANDORA_TS_GPIO;
@ -376,10 +364,19 @@ static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
};
static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
{ OMAP_TAG_UART, &omap3pandora_uart_config },
{ OMAP_TAG_LCD, &omap3pandora_lcd_config },
};
static void __init omap3pandora_init_irq(void)
{
omap_board_config = omap3pandora_config;
omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device *omap3pandora_devices[] __initdata = {
&omap3pandora_lcd_device,
&pandora_leds_gpio,
@ -391,8 +388,6 @@ static void __init omap3pandora_init(void)
omap3pandora_i2c_init();
platform_add_devices(omap3pandora_devices,
ARRAY_SIZE(omap3pandora_devices));
omap_board_config = omap3pandora_config;
omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
omap_serial_init();
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));

24
arch/arm/mach-omap2/board-overo.c
View file

@ -271,9 +271,6 @@ static void __init overo_flash_init(void)
printk(KERN_ERR "Unable to register NAND device\n");
}
}
static struct omap_uart_config overo_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct twl4030_hsmmc_info mmc[] = {
{
@ -360,14 +357,6 @@ static int __init overo_i2c_init(void)
return 0;
}
static void __init overo_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device overo_lcd_device = {
.name = "overo_lcd",
.id = -1,
@ -378,10 +367,19 @@ static struct omap_lcd_config overo_lcd_config __initdata = {
};
static struct omap_board_config_kernel overo_config[] __initdata = {
{ OMAP_TAG_UART, &overo_uart_config },
{ OMAP_TAG_LCD, &overo_lcd_config },
};
static void __init overo_init_irq(void)
{
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device *overo_devices[] __initdata = {
&overo_lcd_device,
};
@ -390,8 +388,6 @@ static void __init overo_init(void)
{
overo_i2c_init();
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap_serial_init();
overo_flash_init();
usb_musb_init();

9
arch/arm/mach-omap2/board-rx51.c
View file

@ -31,10 +31,6 @@
#include <mach/gpmc.h>
#include <mach/usb.h>
static struct omap_uart_config rx51_uart_config = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_lcd_config rx51_lcd_config = {
.ctrl_name = "internal",
};
@ -52,7 +48,6 @@ static struct omap_fbmem_config rx51_fbmem2_config = {
};
static struct omap_board_config_kernel rx51_config[] = {
{ OMAP_TAG_UART, &rx51_uart_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem0_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem1_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem2_config },
@ -61,6 +56,8 @@ static struct omap_board_config_kernel rx51_config[] = {
static void __init rx51_init_irq(void)
{
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
@ -70,8 +67,6 @@ extern void __init rx51_peripherals_init(void);
static void __init rx51_init(void)
{
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap_serial_init();
usb_musb_init();
rx51_peripherals_init();

11
arch/arm/mach-omap2/board-zoom-debugboard.c
View file

@ -12,6 +12,7 @@
#include <linux/gpio.h>
#include <linux/serial_8250.h>
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <mach/gpmc.h>
@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.mapbase = 0x10000000,
.irq = OMAP_GPIO_IRQ(102),
.flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
.irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = QUART_CLK,
@ -94,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
static struct platform_device zoom2_debugboard_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.id = 3,
.dev = {
.platform_data = serial_platform_data,
},
@ -127,6 +129,7 @@ static inline void __init zoom2_init_quaduart(void)
static inline int omap_zoom2_debugboard_detect(void)
{
int debug_board_detect = 0;
int ret = 1;
debug_board_detect = ZOOM2_SMSC911X_GPIO;
@ -138,10 +141,10 @@ static inline int omap_zoom2_debugboard_detect(void)
gpio_direction_input(debug_board_detect);
if (!gpio_get_value(debug_board_detect)) {
gpio_free(debug_board_detect);
return 0;
ret = 0;
}
return 1;
gpio_free(debug_board_detect);
return ret;
}
static struct platform_device *zoom2_devices[] __initdata = {

218
arch/arm/mach-omap2/board-zoom2.c
View file

@ -12,36 +12,217 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include "mmc-twl4030.h"
/* Zoom2 has Qwerty keyboard*/
static int zoom2_twl4030_keymap[] = {
KEY(0, 0, KEY_E),
KEY(1, 0, KEY_R),
KEY(2, 0, KEY_T),
KEY(3, 0, KEY_HOME),
KEY(6, 0, KEY_I),
KEY(7, 0, KEY_LEFTSHIFT),
KEY(0, 1, KEY_D),
KEY(1, 1, KEY_F),
KEY(2, 1, KEY_G),
KEY(3, 1, KEY_SEND),
KEY(6, 1, KEY_K),
KEY(7, 1, KEY_ENTER),
KEY(0, 2, KEY_X),
KEY(1, 2, KEY_C),
KEY(2, 2, KEY_V),
KEY(3, 2, KEY_END),
KEY(6, 2, KEY_DOT),
KEY(7, 2, KEY_CAPSLOCK),
KEY(0, 3, KEY_Z),
KEY(1, 3, KEY_KPPLUS),
KEY(2, 3, KEY_B),
KEY(3, 3, KEY_F1),
KEY(6, 3, KEY_O),
KEY(7, 3, KEY_SPACE),
KEY(0, 4, KEY_W),
KEY(1, 4, KEY_Y),
KEY(2, 4, KEY_U),
KEY(3, 4, KEY_F2),
KEY(4, 4, KEY_VOLUMEUP),
KEY(6, 4, KEY_L),
KEY(7, 4, KEY_LEFT),
KEY(0, 5, KEY_S),
KEY(1, 5, KEY_H),
KEY(2, 5, KEY_J),
KEY(3, 5, KEY_F3),
KEY(5, 5, KEY_VOLUMEDOWN),
KEY(6, 5, KEY_M),
KEY(4, 5, KEY_ENTER),
KEY(7, 5, KEY_RIGHT),
KEY(0, 6, KEY_Q),
KEY(1, 6, KEY_A),
KEY(2, 6, KEY_N),
KEY(3, 6, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
KEY(7, 6, KEY_UP),
KEY(6, 7, KEY_SELECT),
KEY(7, 7, KEY_DOWN),
KEY(0, 7, KEY_PROG1), /*MACRO 1 <User defined> */
KEY(1, 7, KEY_PROG2), /*MACRO 2 <User defined> */
KEY(2, 7, KEY_PROG3), /*MACRO 3 <User defined> */
KEY(3, 7, KEY_PROG4), /*MACRO 4 <User defined> */
0
};
static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
.rows = 8,
.cols = 8,
.keymap = zoom2_twl4030_keymap,
.keymapsize = ARRAY_SIZE(zoom2_twl4030_keymap),
.rep = 1,
};
static struct omap_board_config_kernel zoom2_config[] __initdata = {
};
static struct regulator_consumer_supply zoom2_vmmc1_supply = {
.supply = "vmmc",
};
static struct regulator_consumer_supply zoom2_vsim_supply = {
.supply = "vmmc_aux",
};
static struct regulator_consumer_supply zoom2_vmmc2_supply = {
.supply = "vmmc",
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data zoom2_vmmc1 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 3150000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vmmc1_supply,
};
/* VMMC2 for MMC2 card */
static struct regulator_init_data zoom2_vmmc2 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 1850000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vmmc2_supply,
};
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
static struct regulator_init_data zoom2_vsim = {
.constraints = {
.min_uV = 1800000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom2_vsim_supply,
};
static struct twl4030_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
.gpio_wp = -EINVAL,
},
{
.mmc = 2,
.wires = 4,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
};
static int zoom2_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ),
* gpio + 1 is "mmc1_cd" (input/IRQ)
*/
mmc[0].gpio_cd = gpio + 0;
mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
zoom2_vmmc1_supply.dev = mmc[0].dev;
zoom2_vsim_supply.dev = mmc[0].dev;
zoom2_vmmc2_supply.dev = mmc[1].dev;
return 0;
}
static int zoom2_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data zoom2_bci_data = {
.battery_tmp_tbl = zoom2_batt_table,
.tblsize = ARRAY_SIZE(zoom2_batt_table),
};
static struct twl4030_usb_data zoom2_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static void __init omap_zoom2_init_irq(void)
{
omap_board_config = zoom2_config;
omap_board_config_size = ARRAY_SIZE(zoom2_config);
omap2_init_common_hw(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct omap_uart_config zoom2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel zoom2_config[] __initdata = {
{ OMAP_TAG_UART, &zoom2_uart_config },
};
static struct twl4030_gpio_platform_data zoom2_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = zoom2_twl_gpio_setup,
};
static struct twl4030_madc_platform_data zoom2_madc_data = {
.irq_line = 1,
};
static struct twl4030_platform_data zoom2_twldata = {
@ -49,7 +230,15 @@ static struct twl4030_platform_data zoom2_twldata = {
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &zoom2_bci_data,
.madc = &zoom2_madc_data,
.usb = &zoom2_usb_data,
.gpio = &zoom2_gpio_data,
.keypad = &zoom2_kp_twl4030_data,
.vmmc1 = &zoom2_vmmc1,
.vmmc2 = &zoom2_vmmc2,
.vsim = &zoom2_vsim,
};
static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
@ -70,26 +259,13 @@ static int __init omap_i2c_init(void)
return 0;
}
static struct twl4030_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
};
extern int __init omap_zoom2_debugboard_init(void);
static void __init omap_zoom2_init(void)
{
omap_i2c_init();
omap_board_config = zoom2_config;
omap_board_config_size = ARRAY_SIZE(zoom2_config);
omap_serial_init();
omap_zoom2_debugboard_init();
twl4030_mmc_init(mmc);
usb_musb_init();
}

2
arch/arm/mach-omap2/clock.c
View file

@ -1043,5 +1043,7 @@ void omap2_clk_disable_unused(struct clk *clk)
omap2_clk_disable(clk);
} else
_omap2_clk_disable(clk);
if (clk->clkdm != NULL)
pwrdm_clkdm_state_switch(clk->clkdm);
}
#endif

17
arch/arm/mach-omap2/clock34xx.c
View file

@ -27,6 +27,7 @@
#include <linux/limits.h>
#include <linux/bitops.h>
#include <mach/cpu.h>
#include <mach/clock.h>
#include <mach/sram.h>
#include <asm/div64.h>
@ -1067,17 +1068,17 @@ static int __init omap2_clk_arch_init(void)
return -EINVAL;
/* REVISIT: not yet ready for 343x */
#if 0
if (clk_set_rate(&virt_prcm_set, mpurate))
printk(KERN_ERR "Could not find matching MPU rate\n");
#endif
if (clk_set_rate(&dpll1_ck, mpurate))
printk(KERN_ERR "*** Unable to set MPU rate\n");
recalculate_root_clocks();
printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
(core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
(osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10),
(core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ;
calibrate_delay();
return 0;
}
@ -1136,7 +1137,7 @@ int __init omap2_clk_init(void)
recalculate_root_clocks();
printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
(core_ck.rate / 1000000), (arm_fck.rate / 1000000));

21
arch/arm/mach-omap2/clock34xx.h
View file

@ -1020,6 +1020,7 @@ static struct clk arm_fck = {
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_MPU_CLK_MASK,
.clksel = arm_fck_clksel,
.clkdm_name = "mpu_clkdm",
.recalc = &omap2_clksel_recalc,
};
@ -1155,7 +1156,6 @@ static struct clk gfx_cg1_ck = {
.name = "gfx_cg1_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &gfx_l3_fck, /* REVISIT: correct? */
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_2D_SHIFT,
.clkdm_name = "gfx_3430es1_clkdm",
@ -1166,7 +1166,6 @@ static struct clk gfx_cg2_ck = {
.name = "gfx_cg2_ck",
.ops = &clkops_omap2_dflt_wait,
.parent = &gfx_l3_fck, /* REVISIT: correct? */
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES1_EN_3D_SHIFT,
.clkdm_name = "gfx_3430es1_clkdm",
@ -1210,7 +1209,6 @@ static struct clk sgx_ick = {
.name = "sgx_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
.clkdm_name = "sgx_clkdm",
@ -1223,7 +1221,6 @@ static struct clk d2d_26m_fck = {
.name = "d2d_26m_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430ES1_EN_D2D_SHIFT,
.clkdm_name = "d2d_clkdm",
@ -1234,7 +1231,6 @@ static struct clk modem_fck = {
.name = "modem_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_MODEM_SHIFT,
.clkdm_name = "d2d_clkdm",
@ -1622,7 +1618,6 @@ static struct clk core_l3_ick = {
.name = "core_l3_ick",
.ops = &clkops_null,
.parent = &l3_ick,
.init = &omap2_init_clk_clkdm,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
};
@ -1691,7 +1686,6 @@ static struct clk core_l4_ick = {
.name = "core_l4_ick",
.ops = &clkops_null,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
@ -2089,7 +2083,6 @@ static struct clk dss_tv_fck = {
.name = "dss_tv_fck",
.ops = &clkops_omap2_dflt,
.parent = &omap_54m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
.clkdm_name = "dss_clkdm",
@ -2100,7 +2093,6 @@ static struct clk dss_96m_fck = {
.name = "dss_96m_fck",
.ops = &clkops_omap2_dflt,
.parent = &omap_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_TV_SHIFT,
.clkdm_name = "dss_clkdm",
@ -2111,7 +2103,6 @@ static struct clk dss2_alwon_fck = {
.name = "dss2_alwon_fck",
.ops = &clkops_omap2_dflt,
.parent = &sys_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_DSS2_SHIFT,
.clkdm_name = "dss_clkdm",
@ -2123,7 +2114,6 @@ static struct clk dss_ick_3430es1 = {
.name = "dss_ick",
.ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
.clkdm_name = "dss_clkdm",
@ -2135,7 +2125,6 @@ static struct clk dss_ick_3430es2 = {
.name = "dss_ick",
.ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
.clkdm_name = "dss_clkdm",
@ -2159,7 +2148,6 @@ static struct clk cam_ick = {
.name = "cam_ick",
.ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
.clkdm_name = "cam_clkdm",
@ -2170,7 +2158,6 @@ static struct clk csi2_96m_fck = {
.name = "csi2_96m_fck",
.ops = &clkops_omap2_dflt,
.parent = &core_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CSI2_SHIFT,
.clkdm_name = "cam_clkdm",
@ -2183,7 +2170,6 @@ static struct clk usbhost_120m_fck = {
.name = "usbhost_120m_fck",
.ops = &clkops_omap2_dflt,
.parent = &dpll5_m2_ck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT,
.clkdm_name = "usbhost_clkdm",
@ -2194,7 +2180,6 @@ static struct clk usbhost_48m_fck = {
.name = "usbhost_48m_fck",
.ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
.clkdm_name = "usbhost_clkdm",
@ -2206,7 +2191,6 @@ static struct clk usbhost_ick = {
.name = "usbhost_ick",
.ops = &clkops_omap3430es2_dss_usbhost_wait,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
.enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT,
.clkdm_name = "usbhost_clkdm",
@ -2268,7 +2252,6 @@ static struct clk gpt1_fck = {
static struct clk wkup_32k_fck = {
.name = "wkup_32k_fck",
.ops = &clkops_null,
.init = &omap2_init_clk_clkdm,
.parent = &omap_32k_fck,
.clkdm_name = "wkup_clkdm",
.recalc = &followparent_recalc,
@ -2383,7 +2366,6 @@ static struct clk per_96m_fck = {
.name = "per_96m_fck",
.ops = &clkops_null,
.parent = &omap_96m_alwon_fck,
.init = &omap2_init_clk_clkdm,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};
@ -2392,7 +2374,6 @@ static struct clk per_48m_fck = {
.name = "per_48m_fck",
.ops = &clkops_null,
.parent = &omap_48m_fck,
.init = &omap2_init_clk_clkdm,
.clkdm_name = "per_clkdm",
.recalc = &followparent_recalc,
};

10
arch/arm/mach-omap2/clockdomain.c
View file

@ -299,7 +299,8 @@ struct clockdomain *clkdm_lookup(const char *name)
* anything else to indicate failure; or -EINVAL if the function pointer
* is null.
*/
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
void *user)
{
struct clockdomain *clkdm;
int ret = 0;
@ -309,7 +310,7 @@ int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
mutex_lock(&clkdm_mutex);
list_for_each_entry(clkdm, &clkdm_list, node) {
ret = (*fn)(clkdm);
ret = (*fn)(clkdm, user);
if (ret)
break;
}
@ -484,6 +485,8 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
v << __ffs(clkdm->clktrctrl_mask),
clkdm->pwrdm.ptr->prcm_offs,
CM_CLKSTCTRL);
pwrdm_clkdm_state_switch(clkdm);
}
/**
@ -572,6 +575,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
omap2_clkdm_wakeup(clkdm);
pwrdm_wait_transition(clkdm->pwrdm.ptr);
pwrdm_clkdm_state_switch(clkdm);
return 0;
}
@ -624,6 +628,8 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
else
omap2_clkdm_sleep(clkdm);
pwrdm_clkdm_state_switch(clkdm);
return 0;
}

70
arch/arm/mach-omap2/cm.c Normal file
View file

@ -0,0 +1,70 @@
/*
* OMAP2/3 CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/atomic.h>
#include "cm.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
#define MAX_MODULE_READY_TIME 20000
static const u8 cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
/**
* omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* XXX document
*/
int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
return -EINVAL;
cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
if (cpu_is_omap24xx())
ena = idlest_shift;
else if (cpu_is_omap34xx())
ena = 0;
else
BUG();
mask = 1 << idlest_shift;
/* XXX should be OMAP2 CM */
while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) &&
(i++ < MAX_MODULE_READY_TIME))
udelay(1);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}

10
arch/arm/mach-omap2/cm.h
View file

@ -17,11 +17,11 @@
#include "prcm-common.h"
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
/*
* Architecture-specific global CM registers
@ -98,6 +98,10 @@ extern u32 cm_read_mod_reg(s16 module, u16 idx);
extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
u8 idlest_shift);
extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return cm_rmw_mod_reg_bits(bits, bits, module, idx);

68
arch/arm/mach-omap2/cm4xxx.c Normal file
View file

@ -0,0 +1,68 @@
/*
* OMAP4 CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/atomic.h>
#include "cm.h"
#include "cm-regbits-4xxx.h"
/* XXX move this to cm.h */
/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
#define MAX_MODULE_READY_TIME 20000
/*
* OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
* CM_CLKCTRL register.
*/
#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK (0x2 << 16)
/*
* OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
* the PRCM module offset address (from the CM module base) in bits 15-0.
*/
#define OMAP4_PRCM_MOD_CM_ID_SHIFT 16
#define OMAP4_PRCM_MOD_OFFS_MASK 0xffff
/**
* omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset (XXX example)
* @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
*
* XXX document
*/
int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
{
int i = 0;
u8 cm_id;
u16 prcm_mod_offs;
u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
(i++ < MAX_MODULE_READY_TIME))
udelay(1);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}

41
arch/arm/mach-omap2/devices.c
View file

@ -513,6 +513,47 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
}
if (cpu_is_omap3430()) {
if (controller_nr == 0) {
omap_cfg_reg(N28_3430_MMC1_CLK);
omap_cfg_reg(M27_3430_MMC1_CMD);
omap_cfg_reg(N27_3430_MMC1_DAT0);
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(N26_3430_MMC1_DAT1);
omap_cfg_reg(N25_3430_MMC1_DAT2);
omap_cfg_reg(P28_3430_MMC1_DAT3);
}
if (mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(P27_3430_MMC1_DAT4);
omap_cfg_reg(P26_3430_MMC1_DAT5);
omap_cfg_reg(R27_3430_MMC1_DAT6);
omap_cfg_reg(R25_3430_MMC1_DAT7);
}
}
if (controller_nr == 1) {
/* MMC2 */
omap_cfg_reg(AE2_3430_MMC2_CLK);
omap_cfg_reg(AG5_3430_MMC2_CMD);
omap_cfg_reg(AH5_3430_MMC2_DAT0);
/*
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
* in the board-*.c files
*/
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(AH4_3430_MMC2_DAT1);
omap_cfg_reg(AG4_3430_MMC2_DAT2);
omap_cfg_reg(AF4_3430_MMC2_DAT3);
}
}
/*
* For MMC3 the pins need to be muxed in the board-*.c files
*/
}
}
void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,

23
arch/arm/mach-omap2/io.c
View file

@ -32,17 +32,23 @@
#include <mach/sram.h>
#include <mach/sdrc.h>
#include <mach/gpmc.h>
#include <mach/serial.h>
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
#include <mach/omap-pm.h>
#include <mach/powerdomain.h>
#include "powerdomains.h"
#include <mach/clockdomain.h>
#include "clockdomains.h"
#endif
#include <mach/omap_hwmod.h>
#include "omap_hwmod_2420.h"
#include "omap_hwmod_2430.h"
#include "omap_hwmod_34xx.h"
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
@ -279,11 +285,26 @@ static int __init _omap2_init_reprogram_sdrc(void)
void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
struct omap_hwmod **hwmods = NULL;
if (cpu_is_omap2420())
hwmods = omap2420_hwmods;
else if (cpu_is_omap2430())
hwmods = omap2430_hwmods;
else if (cpu_is_omap34xx())
hwmods = omap34xx_hwmods;
omap_hwmod_init(hwmods);
omap2_mux_init();
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
/* The OPP tables have to be registered before a clk init */
omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
omap_serial_early_init();
omap_hwmod_late_init();
omap_pm_if_init();
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
#endif

17
arch/arm/mach-omap2/iommu2.c
View file

@ -217,10 +217,19 @@ static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
}
#define pr_reg(name) \
p += sprintf(p, "%20s: %08x\n", \
__stringify(name), iommu_read_reg(obj, MMU_##name));
do { \
ssize_t bytes; \
const char *str = "%20s: %08x\n"; \
const int maxcol = 32; \
bytes = snprintf(p, maxcol, str, __stringify(name), \
iommu_read_reg(obj, MMU_##name)); \
p += bytes; \
len -= bytes; \
if (len < maxcol) \
goto out; \
} while (0)
static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len)
{
char *p = buf;
@ -242,7 +251,7 @@ static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
pr_reg(READ_CAM);
pr_reg(READ_RAM);
pr_reg(EMU_FAULT_AD);
out:
return p - buf;
}

55
arch/arm/mach-omap2/mux.c
View file

@ -492,6 +492,61 @@ MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
/* MMC1 */
MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
/* MMC2 */
MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
/* MMC3 */
MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
/* SYS_NIRQ T2 INT1 */
MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
OMAP34XX_MUX_MODE0)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)

2
arch/arm/mach-omap2/omap-smp.c
View file

@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* for us: do so
*/
gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
/*
* Synchronise with the boot thread.

1554
arch/arm/mach-omap2/omap_hwmod.c Normal file
View file

File diff suppressed because it is too large Load diff

141
arch/arm/mach-omap2/omap_hwmod_2420.h Normal file
View file

@ -0,0 +1,141 @@
/*
* omap_hwmod_2420.h - hardware modules present on the OMAP2420 chips
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
#ifdef CONFIG_ARCH_OMAP2420
#include <mach/omap_hwmod.h>
#include <mach/irqs.h>
#include <mach/cpu.h>
#include <mach/dma.h>
#include "prm-regbits-24xx.h"
static struct omap_hwmod omap2420_mpu_hwmod;
static struct omap_hwmod omap2420_l3_hwmod;
static struct omap_hwmod omap2420_l4_core_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
.master = &omap2420_l3_hwmod,
.slave = &omap2420_l4_core_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* MPU -> L3 interface */
static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
.master = &omap2420_mpu_hwmod,
.slave = &omap2420_l3_hwmod,
.user = OCP_USER_MPU,
};
/* Slave interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
&omap2420_mpu__l3,
};
/* Master interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
&omap2420_l3__l4_core,
};
/* L3 */
static struct omap_hwmod omap2420_l3_hwmod = {
.name = "l3_hwmod",
.masters = omap2420_l3_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l3_masters),
.slaves = omap2420_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
static struct omap_hwmod omap2420_l4_wkup_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_l4_wkup_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
&omap2420_l3__l4_core,
};
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
&omap2420_l4_core__l4_wkup,
};
/* L4 CORE */
static struct omap_hwmod omap2420_l4_core_hwmod = {
.name = "l4_core_hwmod",
.masters = omap2420_l4_core_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* Slave interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
&omap2420_l4_core__l4_wkup,
};
/* Master interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
};
/* L4 WKUP */
static struct omap_hwmod omap2420_l4_wkup_hwmod = {
.name = "l4_wkup_hwmod",
.masters = omap2420_l4_wkup_masters,
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* Master interfaces on the MPU device */
static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
&omap2420_mpu__l3,
};
/* MPU */
static struct omap_hwmod omap2420_mpu_hwmod = {
.name = "mpu_hwmod",
.clkdev_dev_id = NULL,
.clkdev_con_id = "mpu_ck",
.masters = omap2420_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
&omap2420_l3_hwmod,
&omap2420_l4_core_hwmod,
&omap2420_l4_wkup_hwmod,
&omap2420_mpu_hwmod,
NULL,
};
#else
# define omap2420_hwmods 0
#endif
#endif

143
arch/arm/mach-omap2/omap_hwmod_2430.h Normal file
View file

@ -0,0 +1,143 @@
/*
* omap_hwmod_2430.h - hardware modules present on the OMAP2430 chips
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
#ifdef CONFIG_ARCH_OMAP2430
#include <mach/omap_hwmod.h>
#include <mach/irqs.h>
#include <mach/cpu.h>
#include <mach/dma.h>
#include "prm-regbits-24xx.h"
static struct omap_hwmod omap2430_mpu_hwmod;
static struct omap_hwmod omap2430_l3_hwmod;
static struct omap_hwmod omap2430_l4_core_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
.master = &omap2430_l3_hwmod,
.slave = &omap2430_l4_core_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* MPU -> L3 interface */
static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
.master = &omap2430_mpu_hwmod,
.slave = &omap2430_l3_hwmod,
.user = OCP_USER_MPU,
};
/* Slave interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
&omap2430_mpu__l3,
};
/* Master interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
&omap2430_l3__l4_core,
};
/* L3 */
static struct omap_hwmod omap2430_l3_hwmod = {
.name = "l3_hwmod",
.masters = omap2430_l3_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l3_masters),
.slaves = omap2430_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
static struct omap_hwmod omap2430_l4_wkup_hwmod;
static struct omap_hwmod omap2430_mmc1_hwmod;
static struct omap_hwmod omap2430_mmc2_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_l4_wkup_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
&omap2430_l3__l4_core,
};
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
&omap2430_l4_core__l4_wkup,
};
/* L4 CORE */
static struct omap_hwmod omap2430_l4_core_hwmod = {
.name = "l4_core_hwmod",
.masters = omap2430_l4_core_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* Slave interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
&omap2430_l4_core__l4_wkup,
};
/* Master interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
};
/* L4 WKUP */
static struct omap_hwmod omap2430_l4_wkup_hwmod = {
.name = "l4_wkup_hwmod",
.masters = omap2430_l4_wkup_masters,
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* Master interfaces on the MPU device */
static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
&omap2430_mpu__l3,
};
/* MPU */
static struct omap_hwmod omap2430_mpu_hwmod = {
.name = "mpu_hwmod",
.clkdev_dev_id = NULL,
.clkdev_con_id = "mpu_ck",
.masters = omap2430_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
&omap2430_l3_hwmod,
&omap2430_l4_core_hwmod,
&omap2430_l4_wkup_hwmod,
&omap2430_mpu_hwmod,
NULL,
};
#else
# define omap2430_hwmods 0
#endif
#endif

168
arch/arm/mach-omap2/omap_hwmod_34xx.h Normal file
View file

@ -0,0 +1,168 @@
/*
* omap_hwmod_34xx.h - hardware modules present on the OMAP34xx chips
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
#ifdef CONFIG_ARCH_OMAP34XX
#include <mach/omap_hwmod.h>
#include <mach/irqs.h>
#include <mach/cpu.h>
#include <mach/dma.h>
#include "prm-regbits-34xx.h"
static struct omap_hwmod omap34xx_mpu_hwmod;
static struct omap_hwmod omap34xx_l3_hwmod;
static struct omap_hwmod omap34xx_l4_core_hwmod;
static struct omap_hwmod omap34xx_l4_per_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap34xx_l3__l4_core = {
.master = &omap34xx_l3_hwmod,
.slave = &omap34xx_l4_core_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L3 -> L4_PER interface */
static struct omap_hwmod_ocp_if omap34xx_l3__l4_per = {
.master = &omap34xx_l3_hwmod,
.slave = &omap34xx_l4_per_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* MPU -> L3 interface */
static struct omap_hwmod_ocp_if omap34xx_mpu__l3 = {
.master = &omap34xx_mpu_hwmod,
.slave = &omap34xx_l3_hwmod,
.user = OCP_USER_MPU,
};
/* Slave interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l3_slaves[] = {
&omap34xx_mpu__l3,
};
/* Master interfaces on the L3 interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l3_masters[] = {
&omap34xx_l3__l4_core,
&omap34xx_l3__l4_per,
};
/* L3 */
static struct omap_hwmod omap34xx_l3_hwmod = {
.name = "l3_hwmod",
.masters = omap34xx_l3_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_l3_masters),
.slaves = omap34xx_l3_slaves,
.slaves_cnt = ARRAY_SIZE(omap34xx_l3_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
static struct omap_hwmod omap34xx_l4_wkup_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap34xx_l4_core__l4_wkup = {
.master = &omap34xx_l4_core_hwmod,
.slave = &omap34xx_l4_wkup_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_core_slaves[] = {
&omap34xx_l3__l4_core,
};
/* Master interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_core_masters[] = {
&omap34xx_l4_core__l4_wkup,
};
/* L4 CORE */
static struct omap_hwmod omap34xx_l4_core_hwmod = {
.name = "l4_core_hwmod",
.masters = omap34xx_l4_core_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_l4_core_masters),
.slaves = omap34xx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap34xx_l4_core_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* Slave interfaces on the L4_PER interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_per_slaves[] = {
&omap34xx_l3__l4_per,
};
/* Master interfaces on the L4_PER interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_per_masters[] = {
};
/* L4 PER */
static struct omap_hwmod omap34xx_l4_per_hwmod = {
.name = "l4_per_hwmod",
.masters = omap34xx_l4_per_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_l4_per_masters),
.slaves = omap34xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap34xx_l4_per_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* Slave interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_slaves[] = {
&omap34xx_l4_core__l4_wkup,
};
/* Master interfaces on the L4_WKUP interconnect */
static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_masters[] = {
};
/* L4 WKUP */
static struct omap_hwmod omap34xx_l4_wkup_hwmod = {
.name = "l4_wkup_hwmod",
.masters = omap34xx_l4_wkup_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_l4_wkup_masters),
.slaves = omap34xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap34xx_l4_wkup_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* Master interfaces on the MPU device */
static struct omap_hwmod_ocp_if *omap34xx_mpu_masters[] = {
&omap34xx_mpu__l3,
};
/* MPU */
static struct omap_hwmod omap34xx_mpu_hwmod = {
.name = "mpu_hwmod",
.clkdev_dev_id = NULL,
.clkdev_con_id = "arm_fck",
.masters = omap34xx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap34xx_mpu_masters),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
&omap34xx_l3_hwmod,
&omap34xx_l4_core_hwmod,
&omap34xx_l4_per_hwmod,
&omap34xx_l4_wkup_hwmod,
&omap34xx_mpu_hwmod,
NULL,
};
#else
# define omap34xx_hwmods 0
#endif
#endif

431
arch/arm/mach-omap2/pm-debug.c
View file

@ -20,13 +20,16 @@
*/
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <mach/clock.h>
#include <mach/board.h>
#include <mach/powerdomain.h>
#include <mach/clockdomain.h>
#include "prm.h"
#include "cm.h"
@ -48,7 +51,9 @@ int omap2_pm_debug;
regs[reg_count++].val = __raw_readl(reg)
#define DUMP_INTC_REG(reg, off) \
regs[reg_count].name = #reg; \
regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
static int __init pm_dbg_init(void);
void omap2_pm_dump(int mode, int resume, unsigned int us)
{
@ -150,3 +155,425 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
for (i = 0; i < reg_count; i++)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
static void pm_dbg_regset_store(u32 *ptr);
struct dentry *pm_dbg_dir;
static int pm_dbg_init_done;
enum {
DEBUG_FILE_COUNTERS = 0,
DEBUG_FILE_TIMERS,
};
struct pm_module_def {
char name[8]; /* Name of the module */
short type; /* CM or PRM */
unsigned short offset;
int low; /* First register address on this module */
int high; /* Last register address on this module */
};
#define MOD_CM 0
#define MOD_PRM 1
static const struct pm_module_def *pm_dbg_reg_modules;
static const struct pm_module_def omap3_pm_reg_modules[] = {
{ "IVA2", MOD_CM, OMAP3430_IVA2_MOD, 0, 0x4c },
{ "OCP", MOD_CM, OCP_MOD, 0, 0x10 },
{ "MPU", MOD_CM, MPU_MOD, 4, 0x4c },
{ "CORE", MOD_CM, CORE_MOD, 0, 0x4c },
{ "SGX", MOD_CM, OMAP3430ES2_SGX_MOD, 0, 0x4c },
{ "WKUP", MOD_CM, WKUP_MOD, 0, 0x40 },
{ "CCR", MOD_CM, PLL_MOD, 0, 0x70 },
{ "DSS", MOD_CM, OMAP3430_DSS_MOD, 0, 0x4c },
{ "CAM", MOD_CM, OMAP3430_CAM_MOD, 0, 0x4c },
{ "PER", MOD_CM, OMAP3430_PER_MOD, 0, 0x4c },
{ "EMU", MOD_CM, OMAP3430_EMU_MOD, 0x40, 0x54 },
{ "NEON", MOD_CM, OMAP3430_NEON_MOD, 0x20, 0x48 },
{ "USB", MOD_CM, OMAP3430ES2_USBHOST_MOD, 0, 0x4c },
{ "IVA2", MOD_PRM, OMAP3430_IVA2_MOD, 0x50, 0xfc },
{ "OCP", MOD_PRM, OCP_MOD, 4, 0x1c },
{ "MPU", MOD_PRM, MPU_MOD, 0x58, 0xe8 },
{ "CORE", MOD_PRM, CORE_MOD, 0x58, 0xf8 },
{ "SGX", MOD_PRM, OMAP3430ES2_SGX_MOD, 0x58, 0xe8 },
{ "WKUP", MOD_PRM, WKUP_MOD, 0xa0, 0xb0 },
{ "CCR", MOD_PRM, PLL_MOD, 0x40, 0x70 },
{ "DSS", MOD_PRM, OMAP3430_DSS_MOD, 0x58, 0xe8 },
{ "CAM", MOD_PRM, OMAP3430_CAM_MOD, 0x58, 0xe8 },
{ "PER", MOD_PRM, OMAP3430_PER_MOD, 0x58, 0xe8 },
{ "EMU", MOD_PRM, OMAP3430_EMU_MOD, 0x58, 0xe4 },
{ "GLBL", MOD_PRM, OMAP3430_GR_MOD, 0x20, 0xe4 },
{ "NEON", MOD_PRM, OMAP3430_NEON_MOD, 0x58, 0xe8 },
{ "USB", MOD_PRM, OMAP3430ES2_USBHOST_MOD, 0x58, 0xe8 },
{ "", 0, 0, 0, 0 },
};
#define PM_DBG_MAX_REG_SETS 4
static void *pm_dbg_reg_set[PM_DBG_MAX_REG_SETS];
static int pm_dbg_get_regset_size(void)
{
static int regset_size;
if (regset_size == 0) {
int i = 0;
while (pm_dbg_reg_modules[i].name[0] != 0) {
regset_size += pm_dbg_reg_modules[i].high +
4 - pm_dbg_reg_modules[i].low;
i++;
}
}
return regset_size;
}
static int pm_dbg_show_regs(struct seq_file *s, void *unused)
{
int i, j;
unsigned long val;
int reg_set = (int)s->private;
u32 *ptr;
void *store = NULL;
int regs;
int linefeed;
if (reg_set == 0) {
store = kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
ptr = store;
pm_dbg_regset_store(ptr);
} else {
ptr = pm_dbg_reg_set[reg_set - 1];
}
i = 0;
while (pm_dbg_reg_modules[i].name[0] != 0) {
regs = 0;
linefeed = 0;
if (pm_dbg_reg_modules[i].type == MOD_CM)
seq_printf(s, "MOD: CM_%s (%08x)\n",
pm_dbg_reg_modules[i].name,
(u32)(OMAP3430_CM_BASE +
pm_dbg_reg_modules[i].offset));
else
seq_printf(s, "MOD: PRM_%s (%08x)\n",
pm_dbg_reg_modules[i].name,
(u32)(OMAP3430_PRM_BASE +
pm_dbg_reg_modules[i].offset));
for (j = pm_dbg_reg_modules[i].low;
j <= pm_dbg_reg_modules[i].high; j += 4) {
val = *(ptr++);
if (val != 0) {
regs++;
if (linefeed) {
seq_printf(s, "\n");
linefeed = 0;
}
seq_printf(s, " %02x => %08lx", j, val);
if (regs % 4 == 0)
linefeed = 1;
}
}
seq_printf(s, "\n");
i++;
}
if (store != NULL)
kfree(store);
return 0;
}
static void pm_dbg_regset_store(u32 *ptr)
{
int i, j;
u32 val;
i = 0;
while (pm_dbg_reg_modules[i].name[0] != 0) {
for (j = pm_dbg_reg_modules[i].low;
j <= pm_dbg_reg_modules[i].high; j += 4) {
if (pm_dbg_reg_modules[i].type == MOD_CM)
val = cm_read_mod_reg(
pm_dbg_reg_modules[i].offset, j);
else
val = prm_read_mod_reg(
pm_dbg_reg_modules[i].offset, j);
*(ptr++) = val;
}
i++;
}
}
int pm_dbg_regset_save(int reg_set)
{
if (pm_dbg_reg_set[reg_set-1] == NULL)
return -EINVAL;
pm_dbg_regset_store(pm_dbg_reg_set[reg_set-1]);
return 0;
}
static const char pwrdm_state_names[][4] = {
"OFF",
"RET",
"INA",
"ON"
};
void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
{
s64 t;
if (!pm_dbg_init_done)
return ;
/* Update timer for previous state */
t = sched_clock();
pwrdm->state_timer[prev] += t - pwrdm->timer;
pwrdm->timer = t;
}
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
if (strcmp(clkdm->name, "emu_clkdm") == 0 ||
strcmp(clkdm->name, "wkup_clkdm") == 0 ||
strncmp(clkdm->name, "dpll", 4) == 0)
return 0;
seq_printf(s, "%s->%s (%d)", clkdm->name,
clkdm->pwrdm.ptr->name,
atomic_read(&clkdm->usecount));
seq_printf(s, "\n");
return 0;
}
static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
int i;
if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
strncmp(pwrdm->name, "dpll", 4) == 0)
return 0;
if (pwrdm->state != pwrdm_read_pwrst(pwrdm))
printk(KERN_ERR "pwrdm state mismatch(%s) %d != %d\n",
pwrdm->name, pwrdm->state, pwrdm_read_pwrst(pwrdm));
seq_printf(s, "%s (%s)", pwrdm->name,
pwrdm_state_names[pwrdm->state]);
for (i = 0; i < 4; i++)
seq_printf(s, ",%s:%d", pwrdm_state_names[i],
pwrdm->state_counter[i]);
seq_printf(s, "\n");
return 0;
}
static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
int i;
if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
strncmp(pwrdm->name, "dpll", 4) == 0)
return 0;
pwrdm_state_switch(pwrdm);
seq_printf(s, "%s (%s)", pwrdm->name,
pwrdm_state_names[pwrdm->state]);
for (i = 0; i < 4; i++)
seq_printf(s, ",%s:%lld", pwrdm_state_names[i],
pwrdm->state_timer[i]);
seq_printf(s, "\n");
return 0;
}
static int pm_dbg_show_counters(struct seq_file *s, void *unused)
{
pwrdm_for_each(pwrdm_dbg_show_counter, s);
clkdm_for_each(clkdm_dbg_show_counter, s);
return 0;
}
static int pm_dbg_show_timers(struct seq_file *s, void *unused)
{
pwrdm_for_each(pwrdm_dbg_show_timer, s);
return 0;
}
static int pm_dbg_open(struct inode *inode, struct file *file)
{
switch ((int)inode->i_private) {
case DEBUG_FILE_COUNTERS:
return single_open(file, pm_dbg_show_counters,
&inode->i_private);
case DEBUG_FILE_TIMERS:
default:
return single_open(file, pm_dbg_show_timers,
&inode->i_private);
};
}
static int pm_dbg_reg_open(struct inode *inode, struct file *file)
{
return single_open(file, pm_dbg_show_regs, inode->i_private);
}
static const struct file_operations debug_fops = {
.open = pm_dbg_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static const struct file_operations debug_reg_fops = {
.open = pm_dbg_reg_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
int pm_dbg_regset_init(int reg_set)
{
char name[2];
if (!pm_dbg_init_done)
pm_dbg_init();
if (reg_set < 1 || reg_set > PM_DBG_MAX_REG_SETS ||
pm_dbg_reg_set[reg_set-1] != NULL)
return -EINVAL;
pm_dbg_reg_set[reg_set-1] =
kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
if (pm_dbg_reg_set[reg_set-1] == NULL)
return -ENOMEM;
if (pm_dbg_dir != NULL) {
sprintf(name, "%d", reg_set);
(void) debugfs_create_file(name, S_IRUGO,
pm_dbg_dir, (void *)reg_set, &debug_reg_fops);
}
return 0;
}
static int pwrdm_suspend_get(void *data, u64 *val)
{
*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
if (*val >= 0)
return 0;
return *val;
}
static int pwrdm_suspend_set(void *data, u64 val)
{
return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
}
DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
pwrdm_suspend_set, "%llu\n");
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
{
int i;
s64 t;
struct dentry *d;
t = sched_clock();
for (i = 0; i < 4; i++)
pwrdm->state_timer[i] = 0;
pwrdm->timer = t;
if (strncmp(pwrdm->name, "dpll", 4) == 0)
return 0;
d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
(void *)pwrdm, &pwrdm_suspend_fops);
return 0;
}
static int __init pm_dbg_init(void)
{
int i;
struct dentry *d;
char name[2];
if (pm_dbg_init_done)
return 0;
if (cpu_is_omap34xx())
pm_dbg_reg_modules = omap3_pm_reg_modules;
else {
printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
return -ENODEV;
}
d = debugfs_create_dir("pm_debug", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
(void) debugfs_create_file("count", S_IRUGO,
d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
(void) debugfs_create_file("time", S_IRUGO,
d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
pwrdm_for_each(pwrdms_setup, (void *)d);
pm_dbg_dir = debugfs_create_dir("registers", d);
if (IS_ERR(pm_dbg_dir))
return PTR_ERR(pm_dbg_dir);
(void) debugfs_create_file("current", S_IRUGO,
pm_dbg_dir, (void *)0, &debug_reg_fops);
for (i = 0; i < PM_DBG_MAX_REG_SETS; i++)
if (pm_dbg_reg_set[i] != NULL) {
sprintf(name, "%d", i+1);
(void) debugfs_create_file(name, S_IRUGO,
pm_dbg_dir, (void *)(i+1), &debug_reg_fops);
}
pm_dbg_init_done = 1;
return 0;
}
arch_initcall(pm_dbg_init);
#else
void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
#endif

11
arch/arm/mach-omap2/pm.h
View file

@ -11,12 +11,23 @@
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
#include <mach/powerdomain.h>
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
#ifdef CONFIG_PM_DEBUG
extern void omap2_pm_dump(int mode, int resume, unsigned int us);
extern int omap2_pm_debug;
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
extern int pm_dbg_regset_init(int reg_set);
#else
#define omap2_pm_dump(mode, resume, us) do {} while (0);
#define omap2_pm_debug 0
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#define pm_dbg_regset_save(reg_set) do {} while (0);
#define pm_dbg_regset_init(reg_set) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
extern void omap24xx_idle_loop_suspend(void);

4
arch/arm/mach-omap2/pm24xx.c
View file

@ -333,7 +333,7 @@ static struct platform_suspend_ops omap_pm_ops = {
.valid = suspend_valid_only_mem,
};
static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm, void *unused)
{
omap2_clkdm_allow_idle(clkdm);
return 0;
@ -385,7 +385,7 @@ static void __init prcm_setup_regs(void)
omap2_clkdm_sleep(gfx_clkdm);
/* Enable clockdomain hardware-supervised control for all clkdms */
clkdm_for_each(_pm_clkdm_enable_hwsup);
clkdm_for_each(_pm_clkdm_enable_hwsup, NULL);
/* Enable clock autoidle for all domains */
cm_write_mod_reg(OMAP24XX_AUTO_CAM |

40
arch/arm/mach-omap2/pm34xx.c
View file

@ -170,6 +170,8 @@ static void omap_sram_idle(void)
printk(KERN_ERR "Invalid mpu state in sram_idle\n");
return;
}
pwrdm_pre_transition();
omap2_gpio_prepare_for_retention();
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
@ -182,6 +184,9 @@ static void omap_sram_idle(void)
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
omap2_gpio_resume_after_retention();
pwrdm_post_transition();
}
/*
@ -271,6 +276,7 @@ static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
if (sleep_switch) {
omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
pwrdm_wait_transition(pwrdm);
pwrdm_state_switch(pwrdm);
}
err:
@ -658,14 +664,38 @@ static void __init prcm_setup_regs(void)
omap3_d2d_idle();
}
static int __init pwrdms_setup(struct powerdomain *pwrdm)
int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
{
struct power_state *pwrst;
list_for_each_entry(pwrst, &pwrst_list, node) {
if (pwrst->pwrdm == pwrdm)
return pwrst->next_state;
}
return -EINVAL;
}
int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state)
{
struct power_state *pwrst;
list_for_each_entry(pwrst, &pwrst_list, node) {
if (pwrst->pwrdm == pwrdm) {
pwrst->next_state = state;
return 0;
}
}
return -EINVAL;
}
static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
{
struct power_state *pwrst;
if (!pwrdm->pwrsts)
return 0;
pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
pwrst->pwrdm = pwrdm;
@ -683,7 +713,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
* supported. Initiate sleep transition for other clockdomains, if
* they are not used
*/
static int __init clkdms_setup(struct clockdomain *clkdm)
static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
{
if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
omap2_clkdm_allow_idle(clkdm);
@ -716,13 +746,13 @@ static int __init omap3_pm_init(void)
goto err1;
}
ret = pwrdm_for_each(pwrdms_setup);
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
printk(KERN_ERR "Failed to setup powerdomains\n");
goto err2;
}
(void) clkdm_for_each(clkdms_setup);
(void) clkdm_for_each(clkdms_setup, NULL);
mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
if (mpu_pwrdm == NULL) {

114
arch/arm/mach-omap2/powerdomain.c
View file

@ -35,6 +35,13 @@
#include <mach/powerdomain.h>
#include <mach/clockdomain.h>
#include "pm.h"
enum {
PWRDM_STATE_NOW = 0,
PWRDM_STATE_PREV,
};
/* pwrdm_list contains all registered struct powerdomains */
static LIST_HEAD(pwrdm_list);
@ -83,7 +90,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
return ERR_PTR(-EINVAL);
for (pd = deps; pd; pd++) {
for (pd = deps; pd->pwrdm_name; pd++) {
if (!omap_chip_is(pd->omap_chip))
continue;
@ -96,12 +103,71 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
}
if (!pd)
if (!pd->pwrdm_name)
return ERR_PTR(-ENOENT);
return pd->pwrdm;
}
static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
{
int prev;
int state;
if (pwrdm == NULL)
return -EINVAL;
state = pwrdm_read_pwrst(pwrdm);
switch (flag) {
case PWRDM_STATE_NOW:
prev = pwrdm->state;
break;
case PWRDM_STATE_PREV:
prev = pwrdm_read_prev_pwrst(pwrdm);
if (pwrdm->state != prev)
pwrdm->state_counter[prev]++;
break;
default:
return -EINVAL;
}
if (state != prev)
pwrdm->state_counter[state]++;
pm_dbg_update_time(pwrdm, prev);
pwrdm->state = state;
return 0;
}
static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
{
pwrdm_clear_all_prev_pwrst(pwrdm);
_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
return 0;
}
static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
{
_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
return 0;
}
static __init void _pwrdm_setup(struct powerdomain *pwrdm)
{
int i;
for (i = 0; i < 4; i++)
pwrdm->state_counter[i] = 0;
pwrdm_wait_transition(pwrdm);
pwrdm->state = pwrdm_read_pwrst(pwrdm);
pwrdm->state_counter[pwrdm->state] = 1;
}
/* Public functions */
@ -117,9 +183,12 @@ void pwrdm_init(struct powerdomain **pwrdm_list)
{
struct powerdomain **p = NULL;
if (pwrdm_list)
for (p = pwrdm_list; *p; p++)
if (pwrdm_list) {
for (p = pwrdm_list; *p; p++) {
pwrdm_register(*p);
_pwrdm_setup(*p);
}
}
}
/**
@ -217,7 +286,8 @@ struct powerdomain *pwrdm_lookup(const char *name)
* anything else to indicate failure; or -EINVAL if the function
* pointer is null.
*/
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user)
{
struct powerdomain *temp_pwrdm;
unsigned long flags;
@ -228,7 +298,7 @@ int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
read_lock_irqsave(&pwrdm_rwlock, flags);
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
ret = (*fn)(temp_pwrdm);
ret = (*fn)(temp_pwrdm, user);
if (ret)
break;
}
@ -1110,4 +1180,36 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
return 0;
}
int pwrdm_state_switch(struct powerdomain *pwrdm)
{
return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
}
int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
{
if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
pwrdm_wait_transition(clkdm->pwrdm.ptr);
return pwrdm_state_switch(clkdm->pwrdm.ptr);
}
return -EINVAL;
}
int pwrdm_clk_state_switch(struct clk *clk)
{
if (clk != NULL && clk->clkdm != NULL)
return pwrdm_clkdm_state_switch(clk->clkdm);
return -EINVAL;
}
int pwrdm_pre_transition(void)
{
pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
return 0;
}
int pwrdm_post_transition(void)
{
pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
return 0;
}

6
arch/arm/mach-omap2/prm.h
View file

@ -17,11 +17,11 @@
#include "prcm-common.h"
#define OMAP2420_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
/*
* Architecture-specific global PRM registers

6
arch/arm/mach-omap2/sdrc.h
View file

@ -48,9 +48,9 @@ static inline u32 sms_read_reg(u16 reg)
return __raw_readl(OMAP_SMS_REGADDR(reg));
}
#else
#define OMAP242X_SDRC_REGADDR(reg) IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
#define OMAP243X_SDRC_REGADDR(reg) IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
#define OMAP34XX_SDRC_REGADDR(reg) IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
#endif /* __ASSEMBLER__ */
#endif

67
arch/arm/mach-omap2/serial.c
View file

@ -73,7 +73,7 @@ static LIST_HEAD(uart_list);
static struct plat_serial8250_port serial_platform_data0[] = {
{
.membase = IO_ADDRESS(OMAP_UART1_BASE),
.membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
.mapbase = OMAP_UART1_BASE,
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
@ -87,7 +87,7 @@ static struct plat_serial8250_port serial_platform_data0[] = {
static struct plat_serial8250_port serial_platform_data1[] = {
{
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
@ -101,7 +101,7 @@ static struct plat_serial8250_port serial_platform_data1[] = {
static struct plat_serial8250_port serial_platform_data2[] = {
{
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
@ -123,6 +123,21 @@ static struct plat_serial8250_port serial_platform_data2[] = {
}
};
#ifdef CONFIG_ARCH_OMAP4
static struct plat_serial8250_port serial_platform_data3[] = {
{
.membase = IO_ADDRESS(OMAP_UART4_BASE),
.mapbase = OMAP_UART4_BASE,
.irq = 70,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
#endif
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
@ -470,7 +485,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
uart->padconf = 0;
}
p->flags |= UPF_SHARE_IRQ;
p->irqflags |= IRQF_SHARED;
ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
"serial idle", (void *)uart);
WARN_ON(ret);
@ -560,12 +575,22 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
},
},
},
#ifdef CONFIG_ARCH_OMAP4
{
.pdev = {
.name = "serial8250",
.id = 3
.dev = {
.platform_data = serial_platform_data3,
},
},
},
#endif
};
void __init omap_serial_init(void)
void __init omap_serial_early_init(void)
{
int i;
const struct omap_uart_config *info;
char name[16];
/*
@ -574,23 +599,12 @@ void __init omap_serial_init(void)
* if not needed.
*/
info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
if (info == NULL)
return;
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct omap_uart_state *uart = &omap_uart[i];
struct platform_device *pdev = &uart->pdev;
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
p->mapbase = 0;
continue;
}
sprintf(name, "uart%d_ick", i+1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
@ -605,8 +619,11 @@ void __init omap_serial_init(void)
uart->fck = NULL;
}
if (!uart->ick || !uart->fck)
continue;
/* FIXME: Remove this once the clkdev is ready */
if (!cpu_is_omap44xx()) {
if (!uart->ick || !uart->fck)
continue;
}
uart->num = i;
p->private_data = uart;
@ -617,6 +634,18 @@ void __init omap_serial_init(void)
p->irq += 32;
omap_uart_enable_clocks(uart);
}
}
void __init omap_serial_init(void)
{
int i;
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct omap_uart_state *uart = &omap_uart[i];
struct platform_device *pdev = &uart->pdev;
struct device *dev = &pdev->dev;
omap_uart_reset(uart);
omap_uart_idle_init(uart);

4
arch/arm/mach-omap2/sram242x.S
View file

@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
prcm_mask_val:
.word 0xFFFF3FFC
omap242x_sdi_timer_32ksynct_cr:
.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_ddr_init_sz)
.word . - omap242x_sram_ddr_init
@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap242x_srs_timer_32ksynct:
.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_reprogram_sdrc_sz)
.word . - omap242x_sram_reprogram_sdrc

4
arch/arm/mach-omap2/sram243x.S
View file

@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
prcm_mask_val:
.word 0xFFFF3FFC
omap243x_sdi_timer_32ksynct_cr:
.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_ddr_init_sz)
.word . - omap243x_sram_ddr_init
@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap243x_srs_timer_32ksynct:
.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_reprogram_sdrc_sz)
.word . - omap243x_sram_reprogram_sdrc

2
arch/arm/mach-omap2/timer-gp.c
View file

@ -231,7 +231,7 @@ static void __init omap2_gp_clocksource_init(void)
static void __init omap2_gp_timer_init(void)
{
#ifdef CONFIG_LOCAL_TIMERS
twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
#endif
omap_dm_timer_init();

12
arch/arm/mach-omap2/usb-musb.c
View file

@ -31,15 +31,6 @@
#include <mach/mux.h>
#include <mach/usb.h>
#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404)
static void __init usb_musb_pm_init(void)
{
/* Ensure force-idle mode for OTG controller */
if (cpu_is_omap34xx())
omap_writel(0, OTG_SYSCONFIG);
}
#ifdef CONFIG_USB_MUSB_SOC
static struct resource musb_resources[] = {
@ -173,13 +164,10 @@ void __init usb_musb_init(void)
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
}
usb_musb_pm_init();
}
#else
void __init usb_musb_init(void)
{
usb_musb_pm_init();
}
#endif /* CONFIG_USB_MUSB_SOC */

17
arch/arm/plat-omap/Kconfig
View file

@ -120,6 +120,10 @@ config OMAP_MBOX_FWK
config OMAP_IOMMU
tristate
config OMAP_IOMMU_DEBUG
depends on OMAP_IOMMU
tristate
choice
prompt "System timer"
default OMAP_MPU_TIMER
@ -183,6 +187,19 @@ config OMAP_SERIAL_WAKE
to data on the serial RX line. This allows you to wake the
system from serial console.
choice
prompt "OMAP PM layer selection"
depends on ARCH_OMAP
default OMAP_PM_NOOP
config OMAP_PM_NONE
bool "No PM layer"
config OMAP_PM_NOOP
bool "No-op/debug PM layer"
endchoice
endmenu
endif

6
arch/arm/plat-omap/Makefile
View file

@ -12,8 +12,13 @@ obj- :=
# OCPI interconnect support for 1710, 1610 and 5912
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
@ -25,3 +30,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o

2
arch/arm/plat-omap/clock.c
View file

@ -488,7 +488,7 @@ static int __init clk_debugfs_init(void)
}
return 0;
err_out:
debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
debugfs_remove_recursive(clk_debugfs_root);
return err;
}
late_initcall(clk_debugfs_init);

88
arch/arm/plat-omap/common.c
View file

@ -54,50 +54,6 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
struct omap_board_config_kernel *kinfo = NULL;
int i;
#ifdef CONFIG_OMAP_BOOT_TAG
struct omap_board_config_entry *info = NULL;
if (omap_bootloader_tag_len > 4)
info = (struct omap_board_config_entry *) omap_bootloader_tag;
while (info != NULL) {
u8 *next;
if (info->tag == tag) {
if (skip == 0)
break;
skip--;
}
if ((info->len & 0x03) != 0) {
/* We bail out to avoid an alignment fault */
printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
info->len, info->tag);
return NULL;
}
next = (u8 *) info + sizeof(*info) + info->len;
if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
info = NULL;
else
info = (struct omap_board_config_entry *) next;
}
if (info != NULL) {
/* Check the length as a lame attempt to check for
* binary inconsistency. */
if (len != NO_LENGTH_CHECK) {
/* Word-align len */
if (len & 0x03)
len = (len + 3) & ~0x03;
if (info->len != len) {
printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
tag, len, info->len);
return NULL;
}
}
if (len_out != NULL)
*len_out = info->len;
return info->data;
}
#endif
/* Try to find the config from the board-specific structures
* in the kernel. */
for (i = 0; i < omap_board_config_size; i++) {
@ -127,50 +83,6 @@ const void *omap_get_var_config(u16 tag, size_t *len)
}
EXPORT_SYMBOL(omap_get_var_config);
static int __init omap_add_serial_console(void)
{
const struct omap_serial_console_config *con_info;
const struct omap_uart_config *uart_info;
static char speed[11], *opt = NULL;
int line, i, uart_idx;
uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
struct omap_serial_console_config);
if (uart_info == NULL || con_info == NULL)
return 0;
if (con_info->console_uart == 0)
return 0;
if (con_info->console_speed) {
snprintf(speed, sizeof(speed), "%u", con_info->console_speed);
opt = speed;
}
uart_idx = con_info->console_uart - 1;
if (uart_idx >= OMAP_MAX_NR_PORTS) {
printk(KERN_INFO "Console: external UART#%d. "
"Not adding it as console this time.\n",
uart_idx + 1);
return 0;
}
if (!(uart_info->enabled_uarts & (1 << uart_idx))) {
printk(KERN_ERR "Console: Selected UART#%d is "
"not enabled for this platform\n",
uart_idx + 1);
return -1;
}
line = 0;
for (i = 0; i < uart_idx; i++) {
if (uart_info->enabled_uarts & (1 << i))
line++;
}
return add_preferred_console("ttyS", line, opt);
}
console_initcall(omap_add_serial_console);
/*
* 32KHz clocksource ... always available, on pretty most chips except
* OMAP 730 and 1510. Other timers could be used as clocksources, with

8
arch/arm/plat-omap/dma.c
View file

@ -2347,16 +2347,16 @@ static int __init omap_init_dma(void)
int ch, r;
if (cpu_class_is_omap1()) {
omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap24xx()) {
omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap34xx()) {
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else if (cpu_is_omap44xx()) {
omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");

5
arch/arm/plat-omap/dmtimer.c
View file

@ -774,7 +774,10 @@ int __init omap_dm_timer_init(void)
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
timer->io_base = IO_ADDRESS(timer->phys_base);
if (cpu_class_is_omap1())
timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
else
timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
if (cpu_class_is_omap2()) {

115
arch/arm/plat-omap/gpio.c
View file

@ -31,7 +31,7 @@
/*
* OMAP1510 GPIO registers
*/
#define OMAP1510_GPIO_BASE IO_ADDRESS(0xfffce000)
#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000)
#define OMAP1510_GPIO_DATA_INPUT 0x00
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
#define OMAP1510_GPIO_DIR_CONTROL 0x08
@ -45,10 +45,10 @@
/*
* OMAP1610 specific GPIO registers
*/
#define OMAP1610_GPIO1_BASE IO_ADDRESS(0xfffbe400)
#define OMAP1610_GPIO2_BASE IO_ADDRESS(0xfffbec00)
#define OMAP1610_GPIO3_BASE IO_ADDRESS(0xfffbb400)
#define OMAP1610_GPIO4_BASE IO_ADDRESS(0xfffbbc00)
#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400)
#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00)
#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400)
#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00)
#define OMAP1610_GPIO_REVISION 0x0000
#define OMAP1610_GPIO_SYSCONFIG 0x0010
#define OMAP1610_GPIO_SYSSTATUS 0x0014
@ -70,12 +70,12 @@
/*
* OMAP730 specific GPIO registers
*/
#define OMAP730_GPIO1_BASE IO_ADDRESS(0xfffbc000)
#define OMAP730_GPIO2_BASE IO_ADDRESS(0xfffbc800)
#define OMAP730_GPIO3_BASE IO_ADDRESS(0xfffbd000)
#define OMAP730_GPIO4_BASE IO_ADDRESS(0xfffbd800)
#define OMAP730_GPIO5_BASE IO_ADDRESS(0xfffbe000)
#define OMAP730_GPIO6_BASE IO_ADDRESS(0xfffbe800)
#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
#define OMAP730_GPIO_DATA_INPUT 0x00
#define OMAP730_GPIO_DATA_OUTPUT 0x04
#define OMAP730_GPIO_DIR_CONTROL 0x08
@ -86,12 +86,12 @@
/*
* OMAP850 specific GPIO registers
*/
#define OMAP850_GPIO1_BASE IO_ADDRESS(0xfffbc000)
#define OMAP850_GPIO2_BASE IO_ADDRESS(0xfffbc800)
#define OMAP850_GPIO3_BASE IO_ADDRESS(0xfffbd000)
#define OMAP850_GPIO4_BASE IO_ADDRESS(0xfffbd800)
#define OMAP850_GPIO5_BASE IO_ADDRESS(0xfffbe000)
#define OMAP850_GPIO6_BASE IO_ADDRESS(0xfffbe800)
#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
#define OMAP850_GPIO_DATA_INPUT 0x00
#define OMAP850_GPIO_DATA_OUTPUT 0x04
#define OMAP850_GPIO_DIR_CONTROL 0x08
@ -99,19 +99,21 @@
#define OMAP850_GPIO_INT_MASK 0x10
#define OMAP850_GPIO_INT_STATUS 0x14
#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
/*
* omap24xx specific GPIO registers
*/
#define OMAP242X_GPIO1_BASE IO_ADDRESS(0x48018000)
#define OMAP242X_GPIO2_BASE IO_ADDRESS(0x4801a000)
#define OMAP242X_GPIO3_BASE IO_ADDRESS(0x4801c000)
#define OMAP242X_GPIO4_BASE IO_ADDRESS(0x4801e000)
#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000)
#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000)
#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000)
#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000)
#define OMAP243X_GPIO1_BASE IO_ADDRESS(0x4900C000)
#define OMAP243X_GPIO2_BASE IO_ADDRESS(0x4900E000)
#define OMAP243X_GPIO3_BASE IO_ADDRESS(0x49010000)
#define OMAP243X_GPIO4_BASE IO_ADDRESS(0x49012000)
#define OMAP243X_GPIO5_BASE IO_ADDRESS(0x480B6000)
#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000)
#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000)
#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000)
#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000)
#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000)
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
@ -168,24 +170,22 @@
* omap34xx specific GPIO registers
*/
#define OMAP34XX_GPIO1_BASE IO_ADDRESS(0x48310000)
#define OMAP34XX_GPIO2_BASE IO_ADDRESS(0x49050000)
#define OMAP34XX_GPIO3_BASE IO_ADDRESS(0x49052000)
#define OMAP34XX_GPIO4_BASE IO_ADDRESS(0x49054000)
#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000)
#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000)
#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000)
#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000)
#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000)
/*
* OMAP44XX specific GPIO registers
*/
#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000)
#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000)
#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000)
#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000)
#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000)
#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000)
#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000)
#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000)
#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000)
#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000)
#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000)
#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000)
struct gpio_bank {
void __iomem *base;
@ -221,7 +221,7 @@ struct gpio_bank {
#ifdef CONFIG_ARCH_OMAP16XX
static struct gpio_bank gpio_bank_1610[5] = {
{ OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
{ OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@ -231,14 +231,14 @@ static struct gpio_bank gpio_bank_1610[5] = {
#ifdef CONFIG_ARCH_OMAP15XX
static struct gpio_bank gpio_bank_1510[2] = {
{ OMAP_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
};
#endif
#ifdef CONFIG_ARCH_OMAP730
static struct gpio_bank gpio_bank_730[7] = {
{ OMAP_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
{ OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
{ OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
@ -250,7 +250,7 @@ static struct gpio_bank gpio_bank_730[7] = {
#ifdef CONFIG_ARCH_OMAP850
static struct gpio_bank gpio_bank_850[7] = {
{ OMAP_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP1_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
{ OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
{ OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
@ -2032,7 +2032,7 @@ void omap2_gpio_resume_after_retention(void)
return;
for (i = 0; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l;
u32 l, gen, gen0, gen1;
if (!(bank->enabled_non_wakeup_gpios))
continue;
@ -2056,13 +2056,32 @@ void omap2_gpio_resume_after_retention(void)
* this silicon bug. */
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
/*
* No need to generate IRQs for the rising edge for gpio IRQs
* configured with falling edge only; and vice versa.
*/
gen0 = l & bank->saved_fallingdetect;
gen0 &= bank->saved_datain;
gen1 = l & bank->saved_risingdetect;
gen1 &= ~(bank->saved_datain);
/* FIXME: Consider GPIO IRQs with level detections properly! */
gen = l & (~(bank->saved_fallingdetect) &
~(bank->saved_risingdetect));
/* Consider all GPIO IRQs needed to be updated */
gen |= gen0 | gen1;
if (gen) {
u32 old0, old1;
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | gen, bank->base +
OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1 | gen, bank->base +
OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
#endif

2
arch/arm/plat-omap/include/mach/board.h
View file

@ -16,10 +16,8 @@
/* Different peripheral ids */
#define OMAP_TAG_CLOCK 0x4f01
#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
#define OMAP_TAG_LCD 0x4f05
#define OMAP_TAG_GPIO_SWITCH 0x4f06
#define OMAP_TAG_UART 0x4f07
#define OMAP_TAG_FBMEM 0x4f08
#define OMAP_TAG_STI_CONSOLE 0x4f09
#define OMAP_TAG_CAMERA_SENSOR 0x4f0a

3
arch/arm/plat-omap/include/mach/clockdomain.h
View file

@ -95,7 +95,8 @@ int clkdm_register(struct clockdomain *clkdm);
int clkdm_unregister(struct clockdomain *clkdm);
struct clockdomain *clkdm_lookup(const char *name);
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm));
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
void *user);
struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
void omap2_clkdm_allow_idle(struct clockdomain *clkdm);

12
arch/arm/plat-omap/include/mach/control.h
View file

@ -20,15 +20,15 @@
#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#else
#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
#endif /* __ASSEMBLY__ */
/*

8
arch/arm/plat-omap/include/mach/entry-macro.S
View file

@ -41,7 +41,7 @@
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =IO_ADDRESS(OMAP_IH1_BASE)
ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
mov \irqstat, #0xffffffff
@ -53,7 +53,7 @@
cmp \irqnr, #0
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
cmpeq \irqnr, #INT_IH2_IRQ
ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE)
ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
addeqs \irqnr, \irqnr, #32
1510:
@ -68,9 +68,9 @@
/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
#elif defined(CONFIG_ARCH_OMAP34XX)
#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
#endif
#if defined(CONFIG_ARCH_OMAP4)
#include <mach/omap44xx.h>

2
arch/arm/plat-omap/include/mach/gpio.h
View file

@ -29,7 +29,7 @@
#include <linux/io.h>
#include <mach/irqs.h>
#define OMAP_MPUIO_BASE 0xfffb5000
#define OMAP1_MPUIO_BASE 0xfffb5000
#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))

97
arch/arm/plat-omap/include/mach/io.h
View file

@ -54,17 +54,33 @@
* ----------------------------------------------------------------------------
*/
#if defined(CONFIG_ARCH_OMAP1)
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define IO_PHYS 0xFFFB0000
#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_SIZE 0x40000
#define IO_VIRT (IO_PHYS - IO_OFFSET)
#define __IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
#define io_v2p(va) ((va) + IO_OFFSET)
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
#elif defined(CONFIG_ARCH_OMAP2)
#define OMAP2_IO_OFFSET 0x90000000
#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
* ----------------------------------------------------------------------------
*/
#define OMAP1_IO_PHYS 0xFFFB0000
#define OMAP1_IO_SIZE 0x40000
#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap2 specific IO mapping
* ----------------------------------------------------------------------------
*/
/* We map both L3 and L4 on OMAP2 */
#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
@ -87,11 +103,6 @@
#define OMAP243X_SMS_VIRT 0xFC000000
#define OMAP243X_SMS_SIZE SZ_1M
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */
/* DSP */
#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */
#define DSP_MEM_24XX_VIRT 0xe0000000
@ -103,7 +114,11 @@
#define DSP_MMU_24XX_VIRT 0xe2000000
#define DSP_MMU_24XX_SIZE SZ_4K
#elif defined(CONFIG_ARCH_OMAP3)
/*
* ----------------------------------------------------------------------------
* Omap3 specific IO mapping
* ----------------------------------------------------------------------------
*/
/* We map both L3 and L4 on OMAP3 */
#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
@ -143,12 +158,6 @@
#define OMAP343X_SDRC_VIRT 0xFD000000
#define OMAP343X_SDRC_SIZE SZ_1M
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
/* DSP */
#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
#define DSP_MEM_34XX_VIRT 0xe0000000
@ -160,8 +169,12 @@
#define DSP_MMU_34XX_VIRT 0xe2000000
#define DSP_MMU_34XX_SIZE SZ_4K
/*
* ----------------------------------------------------------------------------
* Omap4 specific IO mapping
* ----------------------------------------------------------------------------
*/
#elif defined(CONFIG_ARCH_OMAP4)
/* We map both L3 and L4 on OMAP4 */
#define L3_44XX_PHYS L3_44XX_BASE
#define L3_44XX_VIRT 0xd4000000
@ -189,38 +202,24 @@
#define OMAP44XX_GPMC_SIZE SZ_1M
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
/*
* ----------------------------------------------------------------------------
* Omap specific register access
* ----------------------------------------------------------------------------
*/
#endif
#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
#define OMAP1_IO_ADDRESS(pa) IOMEM(__OMAP1_IO_ADDRESS(pa))
#define OMAP2_IO_ADDRESS(pa) IOMEM(__OMAP2_IO_ADDRESS(pa))
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#ifndef __ASSEMBLER__
/*
* Functions to access the OMAP IO region
*
* NOTE: - Use omap_read/write[bwl] for physical register addresses
* - Use __raw_read/write[bwl]() for virtual register addresses
* - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
* - DO NOT use hardcoded virtual addresses to allow changing the
* IO address space again if needed
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
#define omap_readb(a) __raw_readb(IO_ADDRESS(a))
#define omap_readw(a) __raw_readw(IO_ADDRESS(a))
#define omap_readl(a) __raw_readl(IO_ADDRESS(a))
#define omap_writeb(v,a) __raw_writeb(v, IO_ADDRESS(a))
#define omap_writew(v,a) __raw_writew(v, IO_ADDRESS(a))
#define omap_writel(v,a) __raw_writel(v, IO_ADDRESS(a))
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
extern void omap_writeb(u8 v, u32 pa);
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
struct omap_sdrc_params;

6
arch/arm/plat-omap/include/mach/iommu.h
View file

@ -95,7 +95,7 @@ struct iommu_functions {
void (*save_ctx)(struct iommu *obj);
void (*restore_ctx)(struct iommu *obj);
ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len);
};
struct iommu_platform_data {
@ -162,7 +162,7 @@ extern void uninstall_iommu_arch(const struct iommu_functions *ops);
extern int foreach_iommu_device(void *data,
int (*fn)(struct device *, void *));
extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len);
extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len);
#endif /* __MACH_IOMMU_H */

2
arch/arm/plat-omap/include/mach/mtd-xip.h
View file

@ -25,7 +25,7 @@ typedef struct {
} xip_omap_mpu_timer_regs_t;
#define xip_omap_mpu_timer_base(n) \
((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long xip_omap_mpu_timer_read(int nr)

31
arch/arm/plat-omap/include/mach/mux.h
View file

@ -857,6 +857,37 @@ enum omap34xx_index {
/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
H16_34XX_SDRC_CKE0,
H17_34XX_SDRC_CKE1,
/* MMC1 */
N28_3430_MMC1_CLK,
M27_3430_MMC1_CMD,
N27_3430_MMC1_DAT0,
N26_3430_MMC1_DAT1,
N25_3430_MMC1_DAT2,
P28_3430_MMC1_DAT3,
P27_3430_MMC1_DAT4,
P26_3430_MMC1_DAT5,
R27_3430_MMC1_DAT6,
R25_3430_MMC1_DAT7,
/* MMC2 */
AE2_3430_MMC2_CLK,
AG5_3430_MMC2_CMD,
AH5_3430_MMC2_DAT0,
AH4_3430_MMC2_DAT1,
AG4_3430_MMC2_DAT2,
AF4_3430_MMC2_DAT3,
/* MMC3 */
AF10_3430_MMC3_CLK,
AC3_3430_MMC3_CMD,
AE11_3430_MMC3_DAT0,
AH9_3430_MMC3_DAT1,
AF13_3430_MMC3_DAT2,
AF13_3430_MMC3_DAT3,
/* SYS_NIRQ T2 INT1 */
AF26_34XX_SYS_NIRQ,
};
struct omap_mux_cfg {

301
arch/arm/plat-omap/include/mach/omap-pm.h Normal file
View file

@ -0,0 +1,301 @@
/*
* omap-pm.h - OMAP power management interface
*
* Copyright (C) 2008-2009 Texas Instruments, Inc.
* Copyright (C) 2008-2009 Nokia Corporation
* Paul Walmsley
*
* Interface developed by (in alphabetical order): Karthik Dasu, Jouni
* Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
* Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
* Richard Woodruff
*/
#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
#include <linux/device.h>
#include <linux/cpufreq.h>
#include "powerdomain.h"
/**
* struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
* @rate: target clock rate
* @opp_id: OPP ID
* @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
*
* Operating performance point data. Can vary by OMAP chip and board.
*/
struct omap_opp {
unsigned long rate;
u8 opp_id;
u16 min_vdd;
};
extern struct omap_opp *mpu_opps;
extern struct omap_opp *dsp_opps;
extern struct omap_opp *l3_opps;
/*
* agent_id values for use with omap_pm_set_min_bus_tput():
*
* OCP_INITIATOR_AGENT is only valid for devices that can act as
* initiators -- it represents the device's L3 interconnect
* connection. OCP_TARGET_AGENT represents the device's L4
* interconnect connection.
*/
#define OCP_TARGET_AGENT 1
#define OCP_INITIATOR_AGENT 2
/**
* omap_pm_if_early_init - OMAP PM init code called before clock fw init
* @mpu_opp_table: array ptr to struct omap_opp for MPU
* @dsp_opp_table: array ptr to struct omap_opp for DSP
* @l3_opp_table : array ptr to struct omap_opp for CORE
*
* Initialize anything that must be configured before the clock
* framework starts. The "_if_" is to avoid name collisions with the
* PM idle-loop code.
*/
int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
struct omap_opp *dsp_opp_table,
struct omap_opp *l3_opp_table);
/**
* omap_pm_if_init - OMAP PM init code called after clock fw init
*
* The main initialization code. OPP tables are passed in here. The
* "_if_" is to avoid name collisions with the PM idle-loop code.
*/
int __init omap_pm_if_init(void);
/**
* omap_pm_if_exit - OMAP PM exit code
*
* Exit code; currently unused. The "_if_" is to avoid name
* collisions with the PM idle-loop code.
*/
void omap_pm_if_exit(void);
/*
* Device-driver-originated constraints (via board-*.c files, platform_data)
*/
/**
* omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
* @dev: struct device * requesting the constraint
* @t: maximum MPU wakeup latency in microseconds
*
* Request that the maximum interrupt latency for the MPU to be no
* greater than 't' microseconds. "Interrupt latency" in this case is
* defined as the elapsed time from the occurrence of a hardware or
* timer interrupt to the time when the device driver's interrupt
* service routine has been entered by the MPU.
*
* It is intended that underlying PM code will use this information to
* determine what power state to put the MPU powerdomain into, and
* possibly the CORE powerdomain as well, since interrupt handling
* code currently runs from SDRAM. Advanced PM or board*.c code may
* also configure interrupt controller priorities, OCP bus priorities,
* CPU speed(s), etc.
*
* This function will not affect device wakeup latency, e.g., time
* elapsed from when a device driver enables a hardware device with
* clk_enable(), to when the device is ready for register access or
* other use. To control this device wakeup latency, use
* set_max_dev_wakeup_lat()
*
* Multiple calls to set_max_mpu_wakeup_lat() will replace the
* previous t value. To remove the latency target for the MPU, call
* with t = -1.
*
* No return value.
*/
void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
/**
* omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
* @dev: struct device * requesting the constraint
* @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
* @r: minimum throughput (in KiB/s)
*
* Request that the minimum data throughput on the OCP interconnect
* attached to device 'dev' interconnect agent 'tbus_id' be no less
* than 'r' KiB/s.
*
* It is expected that the OMAP PM or bus code will use this
* information to set the interconnect clock to run at the lowest
* possible speed that satisfies all current system users. The PM or
* bus code will adjust the estimate based on its model of the bus, so
* device driver authors should attempt to specify an accurate
* quantity for their device use case, and let the PM or bus code
* overestimate the numbers as necessary to handle request/response
* latency, other competing users on the system, etc. On OMAP2/3, if
* a driver requests a minimum L4 interconnect speed constraint, the
* code will also need to add an minimum L3 interconnect speed
* constraint,
*
* Multiple calls to set_min_bus_tput() will replace the previous rate
* value for this device. To remove the interconnect throughput
* restriction for this device, call with r = 0.
*
* No return value.
*/
void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
/**
* omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
* @dev: struct device *
* @t: maximum device wakeup latency in microseconds
*
* Request that the maximum amount of time necessary for a device to
* become accessible after its clocks are enabled should be no greater
* than 't' microseconds. Specifically, this represents the time from
* when a device driver enables device clocks with clk_enable(), to
* when the register reads and writes on the device will succeed.
* This function should be called before clk_disable() is called,
* since the power state transition decision may be made during
* clk_disable().
*
* It is intended that underlying PM code will use this information to
* determine what power state to put the powerdomain enclosing this
* device into.
*
* Multiple calls to set_max_dev_wakeup_lat() will replace the
* previous wakeup latency values for this device. To remove the wakeup
* latency restriction for this device, call with t = -1.
*
* No return value.
*/
void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
/**
* omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
* @dev: struct device *
* @t: maximum DMA transfer start latency in microseconds
*
* Request that the maximum system DMA transfer start latency for this
* device 'dev' should be no greater than 't' microseconds. "DMA
* transfer start latency" here is defined as the elapsed time from
* when a device (e.g., McBSP) requests that a system DMA transfer
* start or continue, to the time at which data starts to flow into
* that device from the system DMA controller.
*
* It is intended that underlying PM code will use this information to
* determine what power state to put the CORE powerdomain into.
*
* Since system DMA transfers may not involve the MPU, this function
* will not affect MPU wakeup latency. Use set_max_cpu_lat() to do
* so. Similarly, this function will not affect device wakeup latency
* -- use set_max_dev_wakeup_lat() to affect that.
*
* Multiple calls to set_max_sdma_lat() will replace the previous t
* value for this device. To remove the maximum DMA latency for this
* device, call with t = -1.
*
* No return value.
*/
void omap_pm_set_max_sdma_lat(struct device *dev, long t);
/*
* DSP Bridge-specific constraints
*/
/**
* omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
*
* Intended for use by DSPBridge. Returns an array of OPP->DSP clock
* frequency entries. The final item in the array should have .rate =
* .opp_id = 0.
*/
const struct omap_opp *omap_pm_dsp_get_opp_table(void);
/**
* omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
* @opp_id: target DSP OPP ID
*
* Set a minimum OPP ID for the DSP. This is intended to be called
* only from the DSP Bridge MPU-side driver. Unfortunately, the only
* information that code receives from the DSP/BIOS load estimator is the
* target OPP ID; hence, this interface. No return value.
*/
void omap_pm_dsp_set_min_opp(u8 opp_id);
/**
* omap_pm_dsp_get_opp - report the current DSP OPP ID
*
* Report the current OPP for the DSP. Since on OMAP3, the DSP and
* MPU share a single voltage domain, the OPP ID returned back may
* represent a higher DSP speed than the OPP requested via
* omap_pm_dsp_set_min_opp().
*
* Returns the current VDD1 OPP ID, or 0 upon error.
*/
u8 omap_pm_dsp_get_opp(void);
/*
* CPUFreq-originated constraint
*
* In the future, this should be handled by custom OPP clocktype
* functions.
*/
/**
* omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
*
* Provide a frequency table usable by CPUFreq for the current chip/board.
* Returns a pointer to a struct cpufreq_frequency_table array or NULL
* upon error.
*/
struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
/**
* omap_pm_cpu_set_freq - set the current minimum MPU frequency
* @f: MPU frequency in Hz
*
* Set the current minimum CPU frequency. The actual CPU frequency
* used could end up higher if the DSP requested a higher OPP.
* Intended to be called by plat-omap/cpu_omap.c:omap_target(). No
* return value.
*/
void omap_pm_cpu_set_freq(unsigned long f);
/**
* omap_pm_cpu_get_freq - report the current CPU frequency
*
* Returns the current MPU frequency, or 0 upon error.
*/
unsigned long omap_pm_cpu_get_freq(void);
/*
* Device context loss tracking
*/
/**
* omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
* @dev: struct device *
*
* This function returns the number of times that the device @dev has
* lost its internal context. This generally occurs on a powerdomain
* transition to OFF. Drivers use this as an optimization to avoid restoring
* context if the device hasn't lost it. To use, drivers should initially
* call this in their context save functions and store the result. Early in
* the driver's context restore function, the driver should call this function
* again, and compare the result to the stored counter. If they differ, the
* driver must restore device context. If the number of context losses
* exceeds the maximum positive integer, the function will wrap to 0 and
* continue counting. Returns the number of context losses for this device,
* or -EINVAL upon error.
*/
int omap_pm_get_dev_context_loss_count(struct device *dev);
#endif

8
arch/arm/plat-omap/include/mach/omap44xx.h
View file

@ -33,14 +33,14 @@
#define IRQ_SIR_IRQ 0x0040
#define OMAP44XX_GIC_DIST_BASE 0x48241000
#define OMAP44XX_GIC_CPU_BASE 0x48240100
#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
#define OMAP44XX_SCU_BASE 0x48240000
#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE)
#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
#define OMAP44XX_WKUPGEN_BASE 0x48281000
#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
#endif /* __ASM_ARCH_OMAP44XX_H */

141
arch/arm/plat-omap/include/mach/omap_device.h Normal file
View file

@ -0,0 +1,141 @@
/*
* omap_device headers
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* Developed in collaboration with (alphabetical order): Benoit
* Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
* Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
* Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Eventually this type of functionality should either be
* a) implemented via arch-specific pointers in platform_device
* or
* b) implemented as a proper omap_bus/omap_device in Linux, no more
* platform_device
*
* omap_device differs from omap_hwmod in that it includes external
* (e.g., board- and system-level) integration details. omap_hwmod
* stores hardware data that is invariant for a given OMAP chip.
*
* To do:
* - GPIO integration
* - regulator integration
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/omap_hwmod.h>
/* omap_device._state values */
#define OMAP_DEVICE_STATE_UNKNOWN 0
#define OMAP_DEVICE_STATE_ENABLED 1
#define OMAP_DEVICE_STATE_IDLE 2
#define OMAP_DEVICE_STATE_SHUTDOWN 3
/**
* struct omap_device - omap_device wrapper for platform_devices
* @pdev: platform_device
* @hwmods: (one .. many per omap_device)
* @hwmods_cnt: ARRAY_SIZE() of @hwmods
* @pm_lats: ptr to an omap_device_pm_latency table
* @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
* @pm_lat_level: array index of the last odpl entry executed - -1 if never
* @dev_wakeup_lat: dev wakeup latency in microseconds
* @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
* @_state: one of OMAP_DEVICE_STATE_* (see above)
* @flags: device flags
*
* Integrates omap_hwmod data into Linux platform_device.
*
* Field names beginning with underscores are for the internal use of
* the omap_device code.
*
*/
struct omap_device {
struct platform_device pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
u32 dev_wakeup_lat;
u32 _dev_wakeup_lat_limit;
u8 pm_lats_cnt;
s8 pm_lat_level;
u8 hwmods_cnt;
u8 _state;
};
/* Device driver interface (call via platform_data fn ptrs) */
int omap_device_enable(struct platform_device *pdev);
int omap_device_idle(struct platform_device *pdev);
int omap_device_shutdown(struct platform_device *pdev);
/* Core code interface */
int omap_device_count_resources(struct omap_device *od);
int omap_device_fill_resources(struct omap_device *od, struct resource *res);
struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt);
struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt);
int omap_device_register(struct omap_device *od);
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit);
struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
/* Other */
int omap_device_idle_hwmods(struct omap_device *od);
int omap_device_enable_hwmods(struct omap_device *od);
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
/*
* Entries should be kept in latency order ascending
*
* deact_lat is the maximum number of microseconds required to complete
* deactivate_func() at the device's slowest OPP.
*
* act_lat is the maximum number of microseconds required to complete
* activate_func() at the device's slowest OPP.
*
* This will result in some suboptimal power management decisions at fast
* OPPs, but avoids having to recompute all device power management decisions
* if the system shifts from a fast OPP to a slow OPP (in order to meet
* latency requirements).
*
* XXX should deactivate_func/activate_func() take platform_device pointers
* rather than omap_device pointers?
*/
struct omap_device_pm_latency {
u32 deactivate_lat;
int (*deactivate_func)(struct omap_device *od);
u32 activate_lat;
int (*activate_func)(struct omap_device *od);
};
#endif

447
arch/arm/plat-omap/include/mach/omap_hwmod.h Normal file
View file

@ -0,0 +1,447 @@
/*
* omap_hwmod macros, structures
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* Created in collaboration with (alphabetical order): Benoit Cousson,
* Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
* Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* These headers and macros are used to define OMAP on-chip module
* data and their integration with other OMAP modules and Linux.
*
* References:
* - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
* - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
* - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
* - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
* - Open Core Protocol Specification 2.2
*
* To do:
* - add interconnect error log structures
* - add pinmuxing
* - init_conn_id_bit (CONNID_BIT_VECTOR)
* - implement default hwmod SMS/SDRC flags?
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <mach/cpu.h>
struct omap_device;
/* OCP SYSCONFIG bit shifts/masks */
#define SYSC_MIDLEMODE_SHIFT 12
#define SYSC_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT)
#define SYSC_CLOCKACTIVITY_SHIFT 8
#define SYSC_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
#define SYSC_SIDLEMODE_SHIFT 3
#define SYSC_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT)
#define SYSC_ENAWAKEUP_SHIFT 2
#define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT)
#define SYSC_SOFTRESET_SHIFT 1
#define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT)
/* OCP SYSSTATUS bit shifts/masks */
#define SYSS_RESETDONE_SHIFT 0
#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT)
/* Master standby/slave idle mode flags */
#define HWMOD_IDLEMODE_FORCE (1 << 0)
#define HWMOD_IDLEMODE_NO (1 << 1)
#define HWMOD_IDLEMODE_SMART (1 << 2)
/**
* struct omap_hwmod_dma_info - MPU address space handled by the hwmod
* @name: name of the DMA channel (module local name)
* @dma_ch: DMA channel ID
*
* @name should be something short, e.g., "tx" or "rx". It is for use
* by platform_get_resource_byname(). It is defined locally to the
* hwmod.
*/
struct omap_hwmod_dma_info {
const char *name;
u16 dma_ch;
};
/**
* struct omap_hwmod_opt_clk - optional clocks used by this hwmod
* @role: "sys", "32k", "tv", etc -- for use in clk_get()
* @clkdev_dev_id: opt clock: clkdev dev_id string
* @clkdev_con_id: opt clock: clkdev con_id string
* @_clk: pointer to the struct clk (filled in at runtime)
*
* The module's interface clock and main functional clock should not
* be added as optional clocks.
*/
struct omap_hwmod_opt_clk {
const char *role;
const char *clkdev_dev_id;
const char *clkdev_con_id;
struct clk *_clk;
};
/* omap_hwmod_omap2_firewall.flags bits */
#define OMAP_FIREWALL_L3 (1 << 0)
#define OMAP_FIREWALL_L4 (1 << 1)
/**
* struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
* @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
* @l4_fw_region: L4 firewall region ID
* @l4_prot_group: L4 protection group ID
* @flags: (see omap_hwmod_omap2_firewall.flags macros above)
*/
struct omap_hwmod_omap2_firewall {
u8 l3_perm_bit;
u8 l4_fw_region;
u8 l4_prot_group;
u8 flags;
};
/*
* omap_hwmod_addr_space.flags bits
*
* ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
* ADDR_TYPE_RT: Address space contains module register target data.
*/
#define ADDR_MAP_ON_INIT (1 << 0)
#define ADDR_TYPE_RT (1 << 1)
/**
* struct omap_hwmod_addr_space - MPU address space handled by the hwmod
* @pa_start: starting physical address
* @pa_end: ending physical address
* @flags: (see omap_hwmod_addr_space.flags macros above)
*
* Address space doesn't necessarily follow physical interconnect
* structure. GPMC is one example.
*/
struct omap_hwmod_addr_space {
u32 pa_start;
u32 pa_end;
u8 flags;
};
/*
* omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
* interface to interact with the hwmod. Used to add sleep dependencies
* when the module is enabled or disabled.
*/
#define OCP_USER_MPU (1 << 0)
#define OCP_USER_SDMA (1 << 1)
/* omap_hwmod_ocp_if.flags bits */
#define OCPIF_HAS_IDLEST (1 << 0)
#define OCPIF_SWSUP_IDLE (1 << 1)
#define OCPIF_CAN_BURST (1 << 2)
/**
* struct omap_hwmod_ocp_if - OCP interface data
* @master: struct omap_hwmod that initiates OCP transactions on this link
* @slave: struct omap_hwmod that responds to OCP transactions on this link
* @addr: address space associated with this link
* @clkdev_dev_id: interface clock: clkdev dev_id string
* @clkdev_con_id: interface clock: clkdev con_id string
* @_clk: pointer to the interface struct clk (filled in at runtime)
* @fw: interface firewall data
* @addr_cnt: ARRAY_SIZE(@addr)
* @width: OCP data width
* @thread_cnt: number of threads
* @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
* @user: initiators using this interface (see OCP_USER_* macros above)
* @flags: OCP interface flags (see OCPIF_* macros above)
*
* It may also be useful to add a tag_cnt field for OCP2.x devices.
*
* Parameter names beginning with an underscore are managed internally by
* the omap_hwmod code and should not be set during initialization.
*/
struct omap_hwmod_ocp_if {
struct omap_hwmod *master;
struct omap_hwmod *slave;
struct omap_hwmod_addr_space *addr;
const char *clkdev_dev_id;
const char *clkdev_con_id;
struct clk *_clk;
union {
struct omap_hwmod_omap2_firewall omap2;
} fw;
u8 addr_cnt;
u8 width;
u8 thread_cnt;
u8 max_burst_len;
u8 user;
u8 flags;
};
/* Macros for use in struct omap_hwmod_sysconfig */
/* Flags for use in omap_hwmod_sysconfig.idlemodes */
#define MASTER_STANDBY_SHIFT 2
#define SLAVE_IDLE_SHIFT 0
#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
/* omap_hwmod_sysconfig.sysc_flags capability flags */
#define SYSC_HAS_AUTOIDLE (1 << 0)
#define SYSC_HAS_SOFTRESET (1 << 1)
#define SYSC_HAS_ENAWAKEUP (1 << 2)
#define SYSC_HAS_EMUFREE (1 << 3)
#define SYSC_HAS_CLOCKACTIVITY (1 << 4)
#define SYSC_HAS_SIDLEMODE (1 << 5)
#define SYSC_HAS_MIDLEMODE (1 << 6)
#define SYSS_MISSING (1 << 7)
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
#define CLOCKACT_TEST_MAIN 0x1
#define CLOCKACT_TEST_ICLK 0x2
#define CLOCKACT_TEST_NONE 0x3
/**
* struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
*
* @clockact describes to the module which clocks are likely to be
* disabled when the PRCM issues its idle request to the module. Some
* modules have separate clockdomains for the interface clock and main
* functional clock, and can check whether they should acknowledge the
* idle request based on the internal module functionality that has
* been associated with the clocks marked in @clockact. This field is
* only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
*
*/
struct omap_hwmod_sysconfig {
u16 rev_offs;
u16 sysc_offs;
u16 syss_offs;
u8 idlemodes;
u8 sysc_flags;
u8 clockact;
};
/**
* struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
* @module_offs: PRCM submodule offset from the start of the PRM/CM
* @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
* @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
* @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
* @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
* @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
*
* @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
* WKEN, GRPSEL registers. In an ideal world, no extra information
* would be needed for IDLEST information, but alas, there are some
* exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
* are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
*/
struct omap_hwmod_omap2_prcm {
s16 module_offs;
u8 prcm_reg_id;
u8 module_bit;
u8 idlest_reg_id;
u8 idlest_idle_bit;
u8 idlest_stdby_bit;
};
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
* @device_offs: device register offset from @module_offs
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
u32 module_offs;
u16 device_offs;
u8 submodule_wkdep_bit;
};
/*
* omap_hwmod.flags definitions
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
* HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
* of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc.
* HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
* controller, etc.
* HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
#define HWMOD_INIT_NO_RESET (1 << 2)
#define HWMOD_INIT_NO_IDLE (1 << 3)
#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 4)
/*
* omap_hwmod._int_flags definitions
* These are for internal use only and are managed by the omap_hwmod code.
*
* _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
* _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
* _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
*/
#define _HWMOD_NO_MPU_PORT (1 << 0)
#define _HWMOD_WAKEUP_ENABLED (1 << 1)
#define _HWMOD_SYSCONFIG_LOADED (1 << 2)
/*
* omap_hwmod._state definitions
*
* INITIALIZED: reset (optionally), initialized, enabled, disabled
* (optionally)
*
*
*/
#define _HWMOD_STATE_UNKNOWN 0
#define _HWMOD_STATE_REGISTERED 1
#define _HWMOD_STATE_CLKS_INITED 2
#define _HWMOD_STATE_INITIALIZED 3
#define _HWMOD_STATE_ENABLED 4
#define _HWMOD_STATE_IDLE 5
#define _HWMOD_STATE_DISABLED 6
/**
* struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
* @name: name of the hwmod
* @od: struct omap_device currently associated with this hwmod (internal use)
* @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
* @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
* @prcm: PRCM data pertaining to this hwmod
* @clkdev_dev_id: main clock: clkdev dev_id string
* @clkdev_con_id: main clock: clkdev con_id string
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
* @masters: ptr to array of OCP ifs that this hwmod can initiate on
* @slaves: ptr to array of OCP ifs that this hwmod can respond on
* @sysconfig: device SYSCONFIG/SYSSTATUS register data
* @dev_attr: arbitrary device attributes that can be passed to the driver
* @_sysc_cache: internal-use hwmod flags
* @_rt_va: cached register target start address (internal use)
* @_mpu_port_index: cached MPU register target slave ID (internal use)
* @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
* @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
* @mpu_irqs_cnt: number of @mpu_irqs
* @sdma_chs_cnt: number of @sdma_chs
* @opt_clks_cnt: number of @opt_clks
* @master_cnt: number of @master entries
* @slaves_cnt: number of @slave entries
* @response_lat: device OCP response latency (in interface clock cycles)
* @_int_flags: internal-use hwmod flags
* @_state: internal-use hwmod state
* @flags: hwmod flags (documented below)
* @omap_chip: OMAP chips this hwmod is present on
* @node: list node for hwmod list (internal use)
*
* @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
* clock," which for our purposes is defined as "the functional clock needed
* for register accesses to complete." Modules may not have a main clock if
* the interface clock also serves as a main clock.
*
* Parameter names beginning with an underscore are managed internally by
* the omap_hwmod code and should not be set during initialization.
*/
struct omap_hwmod {
const char *name;
struct omap_device *od;
u8 *mpu_irqs;
struct omap_hwmod_dma_info *sdma_chs;
union {
struct omap_hwmod_omap2_prcm omap2;
struct omap_hwmod_omap4_prcm omap4;
} prcm;
const char *clkdev_dev_id;
const char *clkdev_con_id;
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
struct omap_hwmod_sysconfig *sysconfig;
void *dev_attr;
u32 _sysc_cache;
void __iomem *_rt_va;
struct list_head node;
u16 flags;
u8 _mpu_port_index;
u8 msuspendmux_reg_id;
u8 msuspendmux_shift;
u8 response_lat;
u8 mpu_irqs_cnt;
u8 sdma_chs_cnt;
u8 opt_clks_cnt;
u8 masters_cnt;
u8 slaves_cnt;
u8 hwmods_cnt;
u8 _int_flags;
u8 _state;
const struct omap_chip_id omap_chip;
};
int omap_hwmod_init(struct omap_hwmod **ohs);
int omap_hwmod_register(struct omap_hwmod *oh);
int omap_hwmod_unregister(struct omap_hwmod *oh);
struct omap_hwmod *omap_hwmod_lookup(const char *name);
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
int omap_hwmod_late_init(void);
int omap_hwmod_enable(struct omap_hwmod *oh);
int omap_hwmod_idle(struct omap_hwmod *oh);
int omap_hwmod_shutdown(struct omap_hwmod *oh);
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
int omap_hwmod_reset(struct omap_hwmod *oh);
void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh);
int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
struct omap_hwmod *init_oh);
int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
#endif

15
arch/arm/plat-omap/include/mach/powerdomain.h
View file

@ -117,6 +117,13 @@ struct powerdomain {
struct list_head node;
int state;
unsigned state_counter[4];
#ifdef CONFIG_PM_DEBUG
s64 timer;
s64 state_timer[4];
#endif
};
@ -126,7 +133,8 @@ int pwrdm_register(struct powerdomain *pwrdm);
int pwrdm_unregister(struct powerdomain *pwrdm);
struct powerdomain *pwrdm_lookup(const char *name);
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm));
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user);
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
@ -164,4 +172,9 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
int pwrdm_wait_transition(struct powerdomain *pwrdm);
int pwrdm_state_switch(struct powerdomain *pwrdm);
int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
int pwrdm_pre_transition(void);
int pwrdm_post_transition(void);
#endif

15
arch/arm/plat-omap/include/mach/sdrc.h
View file

@ -21,19 +21,28 @@
/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
#define SDRC_SYSCONFIG 0x010
#define SDRC_CS_CFG 0x040
#define SDRC_SHARING 0x044
#define SDRC_ERR_TYPE 0x04C
#define SDRC_DLLA_CTRL 0x060
#define SDRC_DLLA_STATUS 0x064
#define SDRC_DLLB_CTRL 0x068
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MCFG_0 0x080
#define SDRC_MR_0 0x084
#define SDRC_EMR2_0 0x08c
#define SDRC_ACTIM_CTRL_A_0 0x09c
#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
#define SDRC_MANUAL_0 0x0a8
#define SDRC_MCFG_1 0x0B0
#define SDRC_MR_1 0x0B4
#define SDRC_EMR2_1 0x0BC
#define SDRC_ACTIM_CTRL_A_1 0x0C4
#define SDRC_ACTIM_CTRL_B_1 0x0C8
#define SDRC_RFR_CTRL_1 0x0D4
#define SDRC_MANUAL_1 0x0D8
/*
* These values represent the number of memory clock cycles between
@ -71,11 +80,11 @@
*/
#define OMAP242X_SMS_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
#define OMAP243X_SMS_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
#define OMAP343X_SMS_REGADDR(reg) \
(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
/* SMS register offsets - read/write with sms_{read,write}_reg() */

3
arch/arm/plat-omap/include/mach/serial.h
View file

@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_SERIAL_H
#define __ASM_ARCH_SERIAL_H
#include <linux/init.h>
#if defined(CONFIG_ARCH_OMAP1)
/* OMAP1 serial ports */
#define OMAP_UART1_BASE 0xfffb0000
@ -53,6 +55,7 @@
})
#ifndef __ASSEMBLER__
extern void __init omap_serial_early_init(void);
extern void omap_serial_init(void);
extern int omap_uart_can_sleep(void);
extern void omap_uart_check_wakeup(void);

62
arch/arm/plat-omap/io.c
View file

@ -30,8 +30,8 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
{
#ifdef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap1()) {
if (BETWEEN(p, IO_PHYS, IO_SIZE))
return XLATE(p, IO_PHYS, IO_VIRT);
if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
}
if (cpu_is_omap730()) {
if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
@ -132,3 +132,61 @@ void omap_iounmap(volatile void __iomem *addr)
__iounmap(addr);
}
EXPORT_SYMBOL(omap_iounmap);
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
u8 omap_readb(u32 pa)
{
if (cpu_class_is_omap1())
return __raw_readb(OMAP1_IO_ADDRESS(pa));
else
return __raw_readb(OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readb);
u16 omap_readw(u32 pa)
{
if (cpu_class_is_omap1())
return __raw_readw(OMAP1_IO_ADDRESS(pa));
else
return __raw_readw(OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readw);
u32 omap_readl(u32 pa)
{
if (cpu_class_is_omap1())
return __raw_readl(OMAP1_IO_ADDRESS(pa));
else
return __raw_readl(OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readl);
void omap_writeb(u8 v, u32 pa)
{
if (cpu_class_is_omap1())
__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
else
__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writeb);
void omap_writew(u16 v, u32 pa)
{
if (cpu_class_is_omap1())
__raw_writew(v, OMAP1_IO_ADDRESS(pa));
else
__raw_writew(v, OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writew);
void omap_writel(u32 v, u32 pa)
{
if (cpu_class_is_omap1())
__raw_writel(v, OMAP1_IO_ADDRESS(pa));
else
__raw_writel(v, OMAP2_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writel);

415
arch/arm/plat-omap/iommu-debug.c Normal file
View file

@ -0,0 +1,415 @@
/*
* omap iommu: debugfs interface
*
* Copyright (C) 2008-2009 Nokia Corporation
*
* Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/debugfs.h>
#include <mach/iommu.h>
#include <mach/iovmm.h>
#include "iopgtable.h"
#define MAXCOLUMN 100 /* for short messages */
static DEFINE_MUTEX(iommu_debug_lock);
static struct dentry *iommu_debug_root;
static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
u32 ver = iommu_arch_version();
char buf[MAXCOLUMN], *p = buf;
p += sprintf(p, "H/W version: %d.%d\n", (ver >> 4) & 0xf , ver & 0xf);
return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
}
static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
ssize_t bytes;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
mutex_lock(&iommu_debug_lock);
bytes = iommu_dump_ctx(obj, p, count);
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes);
mutex_unlock(&iommu_debug_lock);
kfree(buf);
return bytes;
}
static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
ssize_t bytes, rest;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
mutex_lock(&iommu_debug_lock);
p += sprintf(p, "%8s %8s\n", "cam:", "ram:");
p += sprintf(p, "-----------------------------------------\n");
rest = count - (p - buf);
p += dump_tlb_entries(obj, p, rest);
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
mutex_unlock(&iommu_debug_lock);
kfree(buf);
return bytes;
}
static ssize_t debug_write_pagetable(struct file *file,
const char __user *userbuf, size_t count, loff_t *ppos)
{
struct iotlb_entry e;
struct cr_regs cr;
int err;
struct iommu *obj = file->private_data;
char buf[MAXCOLUMN], *p = buf;
count = min(count, sizeof(buf));
mutex_lock(&iommu_debug_lock);
if (copy_from_user(p, userbuf, count)) {
mutex_unlock(&iommu_debug_lock);
return -EFAULT;
}
sscanf(p, "%x %x", &cr.cam, &cr.ram);
if (!cr.cam || !cr.ram) {
mutex_unlock(&iommu_debug_lock);
return -EINVAL;
}
iotlb_cr_to_e(&cr, &e);
err = iopgtable_store_entry(obj, &e);
if (err)
dev_err(obj->dev, "%s: fail to store cr\n", __func__);
mutex_unlock(&iommu_debug_lock);
return count;
}
#define dump_ioptable_entry_one(lv, da, val) \
({ \
int __err = 0; \
ssize_t bytes; \
const int maxcol = 22; \
const char *str = "%d: %08x %08x\n"; \
bytes = snprintf(p, maxcol, str, lv, da, val); \
p += bytes; \
len -= bytes; \
if (len < maxcol) \
__err = -ENOMEM; \
__err; \
})
static ssize_t dump_ioptable(struct iommu *obj, char *buf, ssize_t len)
{
int i;
u32 *iopgd;
char *p = buf;
spin_lock(&obj->page_table_lock);
iopgd = iopgd_offset(obj, 0);
for (i = 0; i < PTRS_PER_IOPGD; i++, iopgd++) {
int j, err;
u32 *iopte;
u32 da;
if (!*iopgd)
continue;
if (!(*iopgd & IOPGD_TABLE)) {
da = i << IOPGD_SHIFT;
err = dump_ioptable_entry_one(1, da, *iopgd);
if (err)
goto out;
continue;
}
iopte = iopte_offset(iopgd, 0);
for (j = 0; j < PTRS_PER_IOPTE; j++, iopte++) {
if (!*iopte)
continue;
da = (i << IOPGD_SHIFT) + (j << IOPTE_SHIFT);
err = dump_ioptable_entry_one(2, da, *iopgd);
if (err)
goto out;
}
}
out:
spin_unlock(&obj->page_table_lock);
return p - buf;
}
static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
size_t bytes;
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
p += sprintf(p, "L: %8s %8s\n", "da:", "pa:");
p += sprintf(p, "-----------------------------------------\n");
mutex_lock(&iommu_debug_lock);
bytes = PAGE_SIZE - (p - buf);
p += dump_ioptable(obj, p, bytes);
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
mutex_unlock(&iommu_debug_lock);
free_page((unsigned long)buf);
return bytes;
}
static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
struct iovm_struct *tmp;
int uninitialized_var(i);
ssize_t bytes;
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
p += sprintf(p, "%-3s %-8s %-8s %6s %8s\n",
"No", "start", "end", "size", "flags");
p += sprintf(p, "-------------------------------------------------\n");
mutex_lock(&iommu_debug_lock);
list_for_each_entry(tmp, &obj->mmap, list) {
size_t len;
const char *str = "%3d %08x-%08x %6x %8x\n";
const int maxcol = 39;
len = tmp->da_end - tmp->da_start;
p += snprintf(p, maxcol, str,
i, tmp->da_start, tmp->da_end, len, tmp->flags);
if (PAGE_SIZE - (p - buf) < maxcol)
break;
i++;
}
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
mutex_unlock(&iommu_debug_lock);
free_page((unsigned long)buf);
return bytes;
}
static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
char *p, *buf;
struct iovm_struct *area;
ssize_t bytes;
count = min_t(ssize_t, count, PAGE_SIZE);
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
mutex_lock(&iommu_debug_lock);
area = find_iovm_area(obj, (u32)ppos);
if (IS_ERR(area)) {
bytes = -EINVAL;
goto err_out;
}
memcpy(p, area->va, count);
p += count;
bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
err_out:
mutex_unlock(&iommu_debug_lock);
free_page((unsigned long)buf);
return bytes;
}
static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct iommu *obj = file->private_data;
struct iovm_struct *area;
char *p, *buf;
count = min_t(size_t, count, PAGE_SIZE);
buf = (char *)__get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
p = buf;
mutex_lock(&iommu_debug_lock);
if (copy_from_user(p, userbuf, count)) {
count = -EFAULT;
goto err_out;
}
area = find_iovm_area(obj, (u32)ppos);
if (IS_ERR(area)) {
count = -EINVAL;
goto err_out;
}
memcpy(area->va, p, count);
err_out:
mutex_unlock(&iommu_debug_lock);
free_page((unsigned long)buf);
return count;
}
static int debug_open_generic(struct inode *inode, struct file *file)
{
file->private_data = inode->i_private;
return 0;
}
#define DEBUG_FOPS(name) \
static const struct file_operations debug_##name##_fops = { \
.open = debug_open_generic, \
.read = debug_read_##name, \
.write = debug_write_##name, \
};
#define DEBUG_FOPS_RO(name) \
static const struct file_operations debug_##name##_fops = { \
.open = debug_open_generic, \
.read = debug_read_##name, \
};
DEBUG_FOPS_RO(ver);
DEBUG_FOPS_RO(regs);
DEBUG_FOPS_RO(tlb);
DEBUG_FOPS(pagetable);
DEBUG_FOPS_RO(mmap);
DEBUG_FOPS(mem);
#define __DEBUG_ADD_FILE(attr, mode) \
{ \
struct dentry *dent; \
dent = debugfs_create_file(#attr, mode, parent, \
obj, &debug_##attr##_fops); \
if (!dent) \
return -ENOMEM; \
}
#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600)
#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400)
static int iommu_debug_register(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct iommu *obj = platform_get_drvdata(pdev);
struct dentry *d, *parent;
if (!obj || !obj->dev)
return -EINVAL;
d = debugfs_create_dir(obj->name, iommu_debug_root);
if (!d)
return -ENOMEM;
parent = d;
d = debugfs_create_u8("nr_tlb_entries", 400, parent,
(u8 *)&obj->nr_tlb_entries);
if (!d)
return -ENOMEM;
DEBUG_ADD_FILE_RO(ver);
DEBUG_ADD_FILE_RO(regs);
DEBUG_ADD_FILE_RO(tlb);
DEBUG_ADD_FILE(pagetable);
DEBUG_ADD_FILE_RO(mmap);
DEBUG_ADD_FILE(mem);
return 0;
}
static int __init iommu_debug_init(void)
{
struct dentry *d;
int err;
d = debugfs_create_dir("iommu", NULL);
if (!d)
return -ENOMEM;
iommu_debug_root = d;
err = foreach_iommu_device(d, iommu_debug_register);
if (err)
goto err_out;
return 0;
err_out:
debugfs_remove_recursive(iommu_debug_root);
return err;
}
module_init(iommu_debug_init)
static void __exit iommu_debugfs_exit(void)
{
debugfs_remove_recursive(iommu_debug_root);
}
module_exit(iommu_debugfs_exit)
MODULE_DESCRIPTION("omap iommu: debugfs interface");
MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
MODULE_LICENSE("GPL v2");

23
arch/arm/plat-omap/iommu.c
View file

@ -351,16 +351,14 @@ EXPORT_SYMBOL_GPL(flush_iotlb_all);
#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes)
{
ssize_t bytes;
if (!obj || !buf)
return -EINVAL;
clk_enable(obj->clk);
bytes = arch_iommu->dump_ctx(obj, buf);
bytes = arch_iommu->dump_ctx(obj, buf, bytes);
clk_disable(obj->clk);
@ -368,7 +366,7 @@ ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
}
EXPORT_SYMBOL_GPL(iommu_dump_ctx);
static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
{
int i;
struct iotlb_lock saved, l;
@ -379,7 +377,7 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
iotlb_lock_get(obj, &saved);
memcpy(&l, &saved, sizeof(saved));
for (i = 0; i < obj->nr_tlb_entries; i++) {
for (i = 0; i < num; i++) {
struct cr_regs tmp;
iotlb_lock_get(obj, &l);
@ -402,18 +400,21 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
* @obj: target iommu
* @buf: output buffer
**/
size_t dump_tlb_entries(struct iommu *obj, char *buf)
size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t bytes)
{
int i, n;
int i, num;
struct cr_regs *cr;
char *p = buf;
cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
num = bytes / sizeof(*cr);
num = min(obj->nr_tlb_entries, num);
cr = kcalloc(num, sizeof(*cr), GFP_KERNEL);
if (!cr)
return 0;
n = __dump_tlb_entries(obj, cr);
for (i = 0; i < n; i++)
num = __dump_tlb_entries(obj, cr, num);
for (i = 0; i < num; i++)
p += iotlb_dump_cr(obj, cr + i, p);
kfree(cr);

2
arch/arm/plat-omap/iovmm.c
View file

@ -199,7 +199,7 @@ static void *vmap_sg(const struct sg_table *sgt)
va += bytes;
}
flush_cache_vmap(new->addr, total);
flush_cache_vmap(new->addr, new->addr + total);
return new->addr;
err_out:

296
arch/arm/plat-omap/omap-pm-noop.c Normal file
View file

@ -0,0 +1,296 @@
/*
* omap-pm-noop.c - OMAP power management interface - dummy version
*
* This code implements the OMAP power management interface to
* drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for
* debug/demonstration use, as it does nothing but printk() whenever a
* function is called (when DEBUG is defined, below)
*
* Copyright (C) 2008-2009 Texas Instruments, Inc.
* Copyright (C) 2008-2009 Nokia Corporation
* Paul Walmsley
*
* Interface developed by (in alphabetical order):
* Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
* Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
*/
#undef DEBUG
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/device.h>
/* Interface documentation is in mach/omap-pm.h */
#include <mach/omap-pm.h>
#include <mach/powerdomain.h>
struct omap_opp *dsp_opps;
struct omap_opp *mpu_opps;
struct omap_opp *l3_opps;
/*
* Device-driver-originated constraints (via board-*.c files)
*/
void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
};
if (t == -1)
pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
"dev %s\n", dev_name(dev));
else
pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
"dev %s, t = %ld usec\n", dev_name(dev), t);
/*
* For current Linux, this needs to map the MPU to a
* powerdomain, then go through the list of current max lat
* constraints on the MPU and find the smallest. If
* the latency constraint has changed, the code should
* recompute the state to enter for the next powerdomain
* state.
*
* TI CDP code can call constraint_set here.
*/
}
void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
{
if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
agent_id != OCP_TARGET_AGENT)) {
WARN_ON(1);
return;
};
if (r == 0)
pr_debug("OMAP PM: remove min bus tput constraint: "
"dev %s for agent_id %d\n", dev_name(dev), agent_id);
else
pr_debug("OMAP PM: add min bus tput constraint: "
"dev %s for agent_id %d: rate %ld KiB\n",
dev_name(dev), agent_id, r);
/*
* This code should model the interconnect and compute the
* required clock frequency, convert that to a VDD2 OPP ID, then
* set the VDD2 OPP appropriately.
*
* TI CDP code can call constraint_set here on the VDD2 OPP.
*/
}
void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
};
if (t == -1)
pr_debug("OMAP PM: remove max device latency constraint: "
"dev %s\n", dev_name(dev));
else
pr_debug("OMAP PM: add max device latency constraint: "
"dev %s, t = %ld usec\n", dev_name(dev), t);
/*
* For current Linux, this needs to map the device to a
* powerdomain, then go through the list of current max lat
* constraints on that powerdomain and find the smallest. If
* the latency constraint has changed, the code should
* recompute the state to enter for the next powerdomain
* state. Conceivably, this code should also determine
* whether to actually disable the device clocks or not,
* depending on how long it takes to re-enable the clocks.
*
* TI CDP code can call constraint_set here.
*/
}
void omap_pm_set_max_sdma_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
};
if (t == -1)
pr_debug("OMAP PM: remove max DMA latency constraint: "
"dev %s\n", dev_name(dev));
else
pr_debug("OMAP PM: add max DMA latency constraint: "
"dev %s, t = %ld usec\n", dev_name(dev), t);
/*
* For current Linux PM QOS params, this code should scan the
* list of maximum CPU and DMA latencies and select the
* smallest, then set cpu_dma_latency pm_qos_param
* accordingly.
*
* For future Linux PM QOS params, with separate CPU and DMA
* latency params, this code should just set the dma_latency param.
*
* TI CDP code can call constraint_set here.
*/
}
/*
* DSP Bridge-specific constraints
*/
const struct omap_opp *omap_pm_dsp_get_opp_table(void)
{
pr_debug("OMAP PM: DSP request for OPP table\n");
/*
* Return DSP frequency table here: The final item in the
* array should have .rate = .opp_id = 0.
*/
return NULL;
}
void omap_pm_dsp_set_min_opp(u8 opp_id)
{
if (opp_id == 0) {
WARN_ON(1);
return;
}
pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
/*
*
* For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
* can just test to see which is higher, the CPU's desired OPP
* ID or the DSP's desired OPP ID, and use whichever is
* highest.
*
* In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
* rate is keyed on MPU speed, not the OPP ID. So we need to
* map the OPP ID to the MPU speed for use with clk_set_rate()
* if it is higher than the current OPP clock rate.
*
*/
}
u8 omap_pm_dsp_get_opp(void)
{
pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
/*
* For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
*
* CDP12.14+:
* Call clk_get_rate() on the OPP custom clock, map that to an
* OPP ID using the tables defined in board-*.c/chip-*.c files.
*/
return 0;
}
/*
* CPUFreq-originated constraint
*
* In the future, this should be handled by custom OPP clocktype
* functions.
*/
struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
{
pr_debug("OMAP PM: CPUFreq request for frequency table\n");
/*
* Return CPUFreq frequency table here: loop over
* all VDD1 clkrates, pull out the mpu_ck frequencies, build
* table
*/
return NULL;
}
void omap_pm_cpu_set_freq(unsigned long f)
{
if (f == 0) {
WARN_ON(1);
return;
}
pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
f);
/*
* For l-o dev tree, determine whether MPU freq or DSP OPP id
* freq is higher. Find the OPP ID corresponding to the
* higher frequency. Call clk_round_rate() and clk_set_rate()
* on the OPP custom clock.
*
* CDP should just be able to set the VDD1 OPP clock rate here.
*/
}
unsigned long omap_pm_cpu_get_freq(void)
{
pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
/*
* Call clk_get_rate() on the mpu_ck.
*/
return 0;
}
/*
* Device context loss tracking
*/
int omap_pm_get_dev_context_loss_count(struct device *dev)
{
if (!dev) {
WARN_ON(1);
return -EINVAL;
};
pr_debug("OMAP PM: returning context loss count for dev %s\n",
dev_name(dev));
/*
* Map the device to the powerdomain. Return the powerdomain
* off counter.
*/
return 0;
}
/* Should be called before clk framework init */
int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
struct omap_opp *dsp_opp_table,
struct omap_opp *l3_opp_table)
{
mpu_opps = mpu_opp_table;
dsp_opps = dsp_opp_table;
l3_opps = l3_opp_table;
return 0;
}
/* Must be called after clock framework is initialized */
int __init omap_pm_if_init(void)
{
return 0;
}
void omap_pm_if_exit(void)
{
/* Deallocate CPUFreq frequency table here */
}

687
arch/arm/plat-omap/omap_device.c Normal file
View file

@ -0,0 +1,687 @@
/*
* omap_device implementation
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* Developed in collaboration with (alphabetical order): Benoit
* Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
* Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
* Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This code provides a consistent interface for OMAP device drivers
* to control power management and interconnect properties of their
* devices.
*
* In the medium- to long-term, this code should either be
* a) implemented via arch-specific pointers in platform_data
* or
* b) implemented as a proper omap_bus/omap_device in Linux, no more
* platform_data func pointers
*
*
* Guidelines for usage by driver authors:
*
* 1. These functions are intended to be used by device drivers via
* function pointers in struct platform_data. As an example,
* omap_device_enable() should be passed to the driver as
*
* struct foo_driver_platform_data {
* ...
* int (*device_enable)(struct platform_device *pdev);
* ...
* }
*
* Note that the generic "device_enable" name is used, rather than
* "omap_device_enable". This is so other architectures can pass in their
* own enable/disable functions here.
*
* This should be populated during device setup:
*
* ...
* pdata->device_enable = omap_device_enable;
* ...
*
* 2. Drivers should first check to ensure the function pointer is not null
* before calling it, as in:
*
* if (pdata->device_enable)
* pdata->device_enable(pdev);
*
* This allows other architectures that don't use similar device_enable()/
* device_shutdown() functions to execute normally.
*
* ...
*
* Suggested usage by device drivers:
*
* During device initialization:
* device_enable()
*
* During device idle:
* (save remaining device context if necessary)
* device_idle();
*
* During device resume:
* device_enable();
* (restore context if necessary)
*
* During device shutdown:
* device_shutdown()
* (device must be reinitialized at this point to use it again)
*
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <mach/omap_device.h>
#include <mach/omap_hwmod.h>
/* These parameters are passed to _omap_device_{de,}activate() */
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
/* XXX this should be moved into a separate file */
#if defined(CONFIG_ARCH_OMAP2420)
# define OMAP_32KSYNCT_BASE 0x48004000
#elif defined(CONFIG_ARCH_OMAP2430)
# define OMAP_32KSYNCT_BASE 0x49020000
#elif defined(CONFIG_ARCH_OMAP3430)
# define OMAP_32KSYNCT_BASE 0x48320000
#else
# error Unknown OMAP device
#endif
/* Private functions */
/**
* _read_32ksynct - read the OMAP 32K sync timer
*
* Returns the current value of the 32KiHz synchronization counter.
* XXX this should be generalized to simply read the system clocksource.
* XXX this should be moved to a separate synctimer32k.c file
*/
static u32 _read_32ksynct(void)
{
if (!cpu_class_is_omap2())
BUG();
return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
}
/**
* _omap_device_activate - increase device readiness
* @od: struct omap_device *
* @ignore_lat: increase to latency target (0) or full readiness (1)?
*
* Increase readiness of omap_device @od (thus decreasing device
* wakeup latency, but consuming more power). If @ignore_lat is
* IGNORE_WAKEUP_LAT, make the omap_device fully active. Otherwise,
* if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
* latency is greater than the requested maximum wakeup latency, step
* backwards in the omap_device_pm_latency table to ensure the
* device's maximum wakeup latency is less than or equal to the
* requested maximum wakeup latency. Returns 0.
*/
static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
{
u32 a, b;
pr_debug("omap_device: %s: activating\n", od->pdev.name);
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
int act_lat = 0;
od->pm_lat_level--;
odpl = od->pm_lats + od->pm_lat_level;
if (!ignore_lat &&
(od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
break;
a = _read_32ksynct();
/* XXX check return code */
odpl->activate_func(od);
b = _read_32ksynct();
act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
"%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
"activate step %d took longer than expected (%d > %d)\n",
od->pdev.name, od->pdev.id, od->pm_lat_level,
act_lat, odpl->activate_lat);
od->dev_wakeup_lat -= odpl->activate_lat;
}
return 0;
}
/**
* _omap_device_deactivate - decrease device readiness
* @od: struct omap_device *
* @ignore_lat: decrease to latency target (0) or full inactivity (1)?
*
* Decrease readiness of omap_device @od (thus increasing device
* wakeup latency, but conserving power). If @ignore_lat is
* IGNORE_WAKEUP_LAT, make the omap_device fully inactive. Otherwise,
* if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
* latency is less than the requested maximum wakeup latency, step
* forwards in the omap_device_pm_latency table to ensure the device's
* maximum wakeup latency is less than or equal to the requested
* maximum wakeup latency. Returns 0.
*/
static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
{
u32 a, b;
pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
int deact_lat = 0;
odpl = od->pm_lats + od->pm_lat_level;
if (!ignore_lat &&
((od->dev_wakeup_lat + odpl->activate_lat) >
od->_dev_wakeup_lat_limit))
break;
a = _read_32ksynct();
/* XXX check return code */
odpl->deactivate_func(od);
b = _read_32ksynct();
deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
"%d usec\n", od->pdev.name, od->pm_lat_level,
deact_lat);
WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
"deactivate step %d took longer than expected (%d > %d)\n",
od->pdev.name, od->pdev.id, od->pm_lat_level,
deact_lat, odpl->deactivate_lat);
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
}
return 0;
}
static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
{
return container_of(pdev, struct omap_device, pdev);
}
/* Public functions for use by core code */
/**
* omap_device_count_resources - count number of struct resource entries needed
* @od: struct omap_device *
*
* Count the number of struct resource entries needed for this
* omap_device @od. Used by omap_device_build_ss() to determine how
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
int omap_device_count_resources(struct omap_device *od)
{
struct omap_hwmod *oh;
int c = 0;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
c += omap_hwmod_count_resources(oh);
pr_debug("omap_device: %s: counted %d total resources across %d "
"hwmods\n", od->pdev.name, c, od->hwmods_cnt);
return c;
}
/**
* omap_device_fill_resources - fill in array of struct resource
* @od: struct omap_device *
* @res: pointer to an array of struct resource to be filled in
*
* Populate one or more empty struct resource pointed to by @res with
* the resource data for this omap_device @od. Used by
* omap_device_build_ss() after calling omap_device_count_resources().
* Ideally this function would not be needed at all. If omap_device
* replaces platform_device, then we can specify our own
* get_resource()/ get_irq()/etc functions that use the underlying
* omap_hwmod information. Or if platform_device is extended to use
* subarchitecture-specific function pointers, the various
* platform_device functions can simply call omap_device internal
* functions to get device resources. Hacking around the existing
* platform_device code wastes memory. Returns 0.
*/
int omap_device_fill_resources(struct omap_device *od, struct resource *res)
{
struct omap_hwmod *oh;
int c = 0;
int i, r;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) {
r = omap_hwmod_fill_resources(oh, res);
res += r;
c += r;
}
return 0;
}
/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
* @oh: ptr to the single omap_hwmod that backs this omap_device
* @pdata: platform_data ptr to associate with the platform_device
* @pdata_len: amount of memory pointed to by @pdata
* @pm_lats: pointer to a omap_device_pm_latency array for this device
* @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
*
* Convenience function for building and registering a single
* omap_device record, which in turn builds and registers a
* platform_device record. See omap_device_build_ss() for more
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt)
{
struct omap_hwmod *ohs[] = { oh };
if (!oh)
return ERR_PTR(-EINVAL);
return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
pdata_len, pm_lats, pm_lats_cnt);
}
/**
* omap_device_build_ss - build and register an omap_device with multiple hwmods
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
* @oh: ptr to the single omap_hwmod that backs this omap_device
* @pdata: platform_data ptr to associate with the platform_device
* @pdata_len: amount of memory pointed to by @pdata
* @pm_lats: pointer to a omap_device_pm_latency array for this device
* @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
*
* Convenience function for building and registering an omap_device
* subsystem record. Subsystem records consist of multiple
* omap_hwmods. This function in turn builds and registers a
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt)
{
int ret = -ENOMEM;
struct omap_device *od;
char *pdev_name2;
struct resource *res = NULL;
int res_count;
struct omap_hwmod **hwmods;
if (!ohs || oh_cnt == 0 || !pdev_name)
return ERR_PTR(-EINVAL);
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
oh_cnt);
od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
if (!od)
return ERR_PTR(-ENOMEM);
od->hwmods_cnt = oh_cnt;
hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
GFP_KERNEL);
if (!hwmods)
goto odbs_exit1;
memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
od->hwmods = hwmods;
pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
if (!pdev_name2)
goto odbs_exit2;
strcpy(pdev_name2, pdev_name);
od->pdev.name = pdev_name2;
od->pdev.id = pdev_id;
res_count = omap_device_count_resources(od);
if (res_count > 0) {
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto odbs_exit3;
}
omap_device_fill_resources(od, res);
od->pdev.num_resources = res_count;
od->pdev.resource = res;
platform_device_add_data(&od->pdev, pdata, pdata_len);
od->pm_lats = pm_lats;
od->pm_lats_cnt = pm_lats_cnt;
ret = omap_device_register(od);
if (ret)
goto odbs_exit4;
return od;
odbs_exit4:
kfree(res);
odbs_exit3:
kfree(pdev_name2);
odbs_exit2:
kfree(hwmods);
odbs_exit1:
kfree(od);
pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
return ERR_PTR(ret);
}
/**
* omap_device_register - register an omap_device with one omap_hwmod
* @od: struct omap_device * to register
*
* Register the omap_device structure. This currently just calls
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
int omap_device_register(struct omap_device *od)
{
pr_debug("omap_device: %s: registering\n", od->pdev.name);
return platform_device_register(&od->pdev);
}
/* Public functions for use by device drivers through struct platform_data */
/**
* omap_device_enable - fully activate an omap_device
* @od: struct omap_device * to activate
*
* Do whatever is necessary for the hwmods underlying omap_device @od
* to be accessible and ready to operate. This generally involves
* enabling clocks, setting SYSCONFIG registers; and in the future may
* involve remuxing pins. Device drivers should call this function
* (through platform_data function pointers) where they would normally
* enable clocks, etc. Returns -EINVAL if called when the omap_device
* is already enabled, or passes along the return value of
* _omap_device_activate().
*/
int omap_device_enable(struct platform_device *pdev)
{
int ret;
struct omap_device *od;
od = _find_by_pdev(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
WARN(1, "omap_device: %s.%d: omap_device_enable() called from "
"invalid state\n", od->pdev.name, od->pdev.id);
return -EINVAL;
}
/* Enable everything if we're enabling this device from scratch */
if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
od->pm_lat_level = od->pm_lats_cnt;
ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
od->dev_wakeup_lat = 0;
od->_dev_wakeup_lat_limit = INT_MAX;
od->_state = OMAP_DEVICE_STATE_ENABLED;
return ret;
}
/**
* omap_device_idle - idle an omap_device
* @od: struct omap_device * to idle
*
* Idle omap_device @od by calling as many .deactivate_func() entries
* in the omap_device's pm_lats table as is possible without exceeding
* the device's maximum wakeup latency limit, pm_lat_limit. Device
* drivers should call this function (through platform_data function
* pointers) where they would normally disable clocks after operations
* complete, etc.. Returns -EINVAL if the omap_device is not
* currently enabled, or passes along the return value of
* _omap_device_deactivate().
*/
int omap_device_idle(struct platform_device *pdev)
{
int ret;
struct omap_device *od;
od = _find_by_pdev(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
WARN(1, "omap_device: %s.%d: omap_device_idle() called from "
"invalid state\n", od->pdev.name, od->pdev.id);
return -EINVAL;
}
ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
od->_state = OMAP_DEVICE_STATE_IDLE;
return ret;
}
/**
* omap_device_shutdown - shut down an omap_device
* @od: struct omap_device * to shut down
*
* Shut down omap_device @od by calling all .deactivate_func() entries
* in the omap_device's pm_lats table and then shutting down all of
* the underlying omap_hwmods. Used when a device is being "removed"
* or a device driver is being unloaded. Returns -EINVAL if the
* omap_device is not currently enabled or idle, or passes along the
* return value of _omap_device_deactivate().
*/
int omap_device_shutdown(struct platform_device *pdev)
{
int ret, i;
struct omap_device *od;
struct omap_hwmod *oh;
od = _find_by_pdev(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
WARN(1, "omap_device: %s.%d: omap_device_shutdown() called "
"from invalid state\n", od->pdev.name, od->pdev.id);
return -EINVAL;
}
ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_shutdown(oh);
od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
return ret;
}
/**
* omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
* @od: struct omap_device *
*
* When a device's maximum wakeup latency limit changes, call some of
* the .activate_func or .deactivate_func function pointers in the
* omap_device's pm_lats array to ensure that the device's maximum
* wakeup latency is less than or equal to the new latency limit.
* Intended to be called by OMAP PM code whenever a device's maximum
* wakeup latency limit changes (e.g., via
* omap_pm_set_dev_wakeup_lat()). Returns 0 if nothing needs to be
* done (e.g., if the omap_device is not currently idle, or if the
* wakeup latency is already current with the new limit) or passes
* along the return value of _omap_device_deactivate() or
* _omap_device_activate().
*/
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit)
{
int ret = -EINVAL;
struct omap_device *od;
od = _find_by_pdev(pdev);
if (new_wakeup_lat_limit == od->dev_wakeup_lat)
return 0;
od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
if (od->_state != OMAP_DEVICE_STATE_IDLE)
return 0;
else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
ret = _omap_device_activate(od, USE_WAKEUP_LAT);
return ret;
}
/**
* omap_device_get_pwrdm - return the powerdomain * associated with @od
* @od: struct omap_device *
*
* Return the powerdomain associated with the first underlying
* omap_hwmod for this omap_device. Intended for use by core OMAP PM
* code. Returns NULL on error or a struct powerdomain * upon
* success.
*/
struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
{
/*
* XXX Assumes that all omap_hwmod powerdomains are identical.
* This may not necessarily be true. There should be a sanity
* check in here to WARN() if any difference appears.
*/
if (!od->hwmods_cnt)
return NULL;
return omap_hwmod_get_pwrdm(od->hwmods[0]);
}
/*
* Public functions intended for use in omap_device_pm_latency
* .activate_func and .deactivate_func function pointers
*/
/**
* omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
* @od: struct omap_device *od
*
* Enable all underlying hwmods. Returns 0.
*/
int omap_device_enable_hwmods(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_enable(oh);
/* XXX pass along return value here? */
return 0;
}
/**
* omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
* @od: struct omap_device *od
*
* Idle all underlying hwmods. Returns 0.
*/
int omap_device_idle_hwmods(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_idle(oh);
/* XXX pass along return value here? */
return 0;
}
/**
* omap_device_disable_clocks - disable all main and interface clocks
* @od: struct omap_device *od
*
* Disable the main functional clock and interface clock for all of the
* omap_hwmods associated with the omap_device. Returns 0.
*/
int omap_device_disable_clocks(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_disable_clocks(oh);
/* XXX pass along return value here? */
return 0;
}
/**
* omap_device_enable_clocks - enable all main and interface clocks
* @od: struct omap_device *od
*
* Enable the main functional clock and interface clock for all of the
* omap_hwmods associated with the omap_device. Returns 0.
*/
int omap_device_enable_clocks(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_enable_clocks(oh);
/* XXX pass along return value here? */
return 0;
}

18
arch/arm/plat-omap/sram.c
View file

@ -56,16 +56,16 @@
#define SRAM_BOOTLOADER_SZ 0x80
#endif
#define OMAP24XX_VA_REQINFOPERM0 IO_ADDRESS(0x68005048)
#define OMAP24XX_VA_READPERM0 IO_ADDRESS(0x68005050)
#define OMAP24XX_VA_WRITEPERM0 IO_ADDRESS(0x68005058)
#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048)
#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050)
#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058)
#define OMAP34XX_VA_REQINFOPERM0 IO_ADDRESS(0x68012848)
#define OMAP34XX_VA_READPERM0 IO_ADDRESS(0x68012850)
#define OMAP34XX_VA_WRITEPERM0 IO_ADDRESS(0x68012858)
#define OMAP34XX_VA_ADDR_MATCH2 IO_ADDRESS(0x68012880)
#define OMAP34XX_VA_SMS_RG_ATT0 IO_ADDRESS(0x6C000048)
#define OMAP34XX_VA_CONTROL_STAT IO_ADDRESS(0x480022F0)
#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848)
#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850)
#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858)
#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880)
#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048)
#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0)
#define GP_DEVICE 0x300

Some files were not shown because too many files have changed in this diff Show more