mirror of
https://github.com/adulau/aha.git
synced 2024-12-28 03:36:19 +00:00
ns9xxx: prepare for adding support for Digi ns921x processors
The hardware team changed some things that were taken as being common to all ns9xxx processors up to now. This patch addresses: - irqs: s/IRQ_/IRQ_NS9360_/ - system module registers: some registers are still general, their definition lives now in include/asm-arm/arch-ns9xxx/regs-sys-common.h. The ns9360 specific ones are in .../regs-sys-ns9360.h As a result ns9360_systemclock cannot be static inline any more as its definition needs regs-sys-ns9360.h. This becomes a real problem when adding support for ns9215 as this will need regs-sys-ns9215.h and including both files will not work. For the same reason ns9360_reset() is now non-inline and gpio functions live in their own file. - register mapping: s/ns9xxx_map_io/ns9360_map_io/ - timer registers: move time.c to time-ns9360.c; s/ns9xxx_timer/ns9360_timer/ Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
This commit is contained in:
Uwe Kleine-König
parent
3a581349b9
commit
724ce5ee15
19 changed files with 409 additions and 310 deletions
|
|
@ -1,8 +1,10 @@
|
|||
obj-y := irq.o time.o generic.o gpio.o
|
||||
obj-y := irq.o generic.o gpio.o
|
||||
|
||||
obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
|
||||
obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o
|
||||
|
||||
obj-$(CONFIG_PROCESSOR_NS9360) += gpio-ns9360.o processor-ns9360.o time-ns9360.o
|
||||
|
||||
obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
|
||||
obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o
|
||||
|
||||
|
|
|
|||
|
|
@ -14,7 +14,8 @@
|
|||
#include <asm/gpio.h>
|
||||
|
||||
#include <asm/arch-ns9xxx/board.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys.h>
|
||||
#include <asm/arch-ns9xxx/processor-ns9360.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
|
||||
#include <asm/arch-ns9xxx/regs-mem.h>
|
||||
#include <asm/arch-ns9xxx/regs-bbu.h>
|
||||
#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
|
||||
|
|
@ -103,9 +104,9 @@ void __init board_a9m9750dev_init_irq(void)
|
|||
int i;
|
||||
|
||||
if (gpio_request(11, "board a9m9750dev extirq2") == 0)
|
||||
ns9xxx_gpio_configure(11, 0, 1);
|
||||
ns9360_gpio_configure(11, 0, 1);
|
||||
else
|
||||
printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_EXT2\n",
|
||||
printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_NS9XXX_EXT2\n",
|
||||
__func__);
|
||||
|
||||
for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
|
||||
|
|
@ -114,13 +115,13 @@ void __init board_a9m9750dev_init_irq(void)
|
|||
set_irq_flags(i, IRQF_VALID);
|
||||
}
|
||||
|
||||
/* IRQ_EXT2: level sensitive + active low */
|
||||
/* IRQ_NS9XXX_EXT2: level sensitive + active low */
|
||||
eic = __raw_readl(SYS_EIC(2));
|
||||
REGSET(eic, SYS_EIC, PLTY, AL);
|
||||
REGSET(eic, SYS_EIC, LVEDG, LEVEL);
|
||||
__raw_writel(eic, SYS_EIC(2));
|
||||
|
||||
set_irq_chained_handler(IRQ_EXT2,
|
||||
set_irq_chained_handler(IRQ_NS9XXX_EXT2,
|
||||
a9m9750dev_fpga_demux_handler);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/generic.c
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -11,34 +11,9 @@
|
|||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <asm/memory.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys.h>
|
||||
#include <asm/arch-ns9xxx/regs-mem.h>
|
||||
#include <asm/arch-ns9xxx/board.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
||||
static struct map_desc standard_io_desc[] __initdata = {
|
||||
{ /* BBus */
|
||||
.virtual = io_p2v(0x90000000),
|
||||
.pfn = __phys_to_pfn(0x90000000),
|
||||
.length = 0x00700000,
|
||||
.type = MT_DEVICE,
|
||||
}, { /* AHB */
|
||||
.virtual = io_p2v(0xa0100000),
|
||||
.pfn = __phys_to_pfn(0xa0100000),
|
||||
.length = 0x00900000,
|
||||
.type = MT_DEVICE,
|
||||
},
|
||||
};
|
||||
|
||||
void __init ns9xxx_map_io(void)
|
||||
{
|
||||
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
|
||||
}
|
||||
|
||||
void __init ns9xxx_init_machine(void)
|
||||
{
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/generic.h
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -13,7 +13,4 @@
|
|||
#include <linux/init.h>
|
||||
|
||||
void __init ns9xxx_init_irq(void);
|
||||
void __init ns9xxx_map_io(void);
|
||||
void __init ns9xxx_init_machine(void);
|
||||
|
||||
extern struct sys_timer ns9xxx_timer;
|
||||
|
|
|
|||
118
arch/arm/mach-ns9xxx/gpio-ns9360.c
Normal file
118
arch/arm/mach-ns9xxx/gpio-ns9360.c
Normal file
|
|
@ -0,0 +1,118 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/gpio-ns9360.c
|
||||
*
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/bug.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
|
||||
#include <asm/arch-ns9xxx/regs-bbu.h>
|
||||
#include <asm/arch-ns9xxx/processor-ns9360.h>
|
||||
|
||||
#include "gpio-ns9360.h"
|
||||
|
||||
static inline int ns9360_valid_gpio(unsigned gpio)
|
||||
{
|
||||
return gpio <= 72;
|
||||
}
|
||||
|
||||
static inline void __iomem *ns9360_gpio_get_gconfaddr(unsigned gpio)
|
||||
{
|
||||
if (gpio < 56)
|
||||
return BBU_GCONFb1(gpio / 8);
|
||||
else
|
||||
/*
|
||||
* this could be optimised away on
|
||||
* ns9750 only builds, but it isn't ...
|
||||
*/
|
||||
return BBU_GCONFb2((gpio - 56) / 8);
|
||||
}
|
||||
|
||||
static inline void __iomem *ns9360_gpio_get_gctrladdr(unsigned gpio)
|
||||
{
|
||||
if (gpio < 32)
|
||||
return BBU_GCTRL1;
|
||||
else if (gpio < 64)
|
||||
return BBU_GCTRL2;
|
||||
else
|
||||
/* this could be optimised away on ns9750 only builds */
|
||||
return BBU_GCTRL3;
|
||||
}
|
||||
|
||||
static inline void __iomem *ns9360_gpio_get_gstataddr(unsigned gpio)
|
||||
{
|
||||
if (gpio < 32)
|
||||
return BBU_GSTAT1;
|
||||
else if (gpio < 64)
|
||||
return BBU_GSTAT2;
|
||||
else
|
||||
/* this could be optimised away on ns9750 only builds */
|
||||
return BBU_GSTAT3;
|
||||
}
|
||||
|
||||
/*
|
||||
* each gpio can serve for 4 different purposes [0..3]. These are called
|
||||
* "functions" and passed in the parameter func. Functions 0-2 are always some
|
||||
* special things, function 3 is GPIO. If func == 3 dir specifies input or
|
||||
* output, and with inv you can enable an inverter (independent of func).
|
||||
*/
|
||||
int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func)
|
||||
{
|
||||
void __iomem *conf = ns9360_gpio_get_gconfaddr(gpio);
|
||||
u32 confval;
|
||||
|
||||
confval = __raw_readl(conf);
|
||||
REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir);
|
||||
REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv);
|
||||
REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func);
|
||||
__raw_writel(confval, conf);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int ns9360_gpio_configure(unsigned gpio, int inv, int func)
|
||||
{
|
||||
if (likely(ns9360_valid_gpio(gpio))) {
|
||||
if (func == 3) {
|
||||
printk(KERN_WARNING "use gpio_direction_input "
|
||||
"or gpio_direction_output\n");
|
||||
return -EINVAL;
|
||||
} else
|
||||
return __ns9360_gpio_configure(gpio, 0, inv, func);
|
||||
} else
|
||||
return -EINVAL;
|
||||
}
|
||||
EXPORT_SYMBOL(ns9360_gpio_configure);
|
||||
|
||||
int ns9360_gpio_get_value(unsigned gpio)
|
||||
{
|
||||
void __iomem *stat = ns9360_gpio_get_gstataddr(gpio);
|
||||
int ret;
|
||||
|
||||
ret = 1 & (__raw_readl(stat) >> (gpio & 31));
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
void ns9360_gpio_set_value(unsigned gpio, int value)
|
||||
{
|
||||
void __iomem *ctrl = ns9360_gpio_get_gctrladdr(gpio);
|
||||
u32 ctrlval;
|
||||
|
||||
ctrlval = __raw_readl(ctrl);
|
||||
|
||||
if (value)
|
||||
ctrlval |= 1 << (gpio & 31);
|
||||
else
|
||||
ctrlval &= ~(1 << (gpio & 31));
|
||||
|
||||
__raw_writel(ctrlval, ctrl);
|
||||
}
|
||||
13
arch/arm/mach-ns9xxx/gpio-ns9360.h
Normal file
13
arch/arm/mach-ns9xxx/gpio-ns9360.h
Normal file
|
|
@ -0,0 +1,13 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/gpio-ns9360.h
|
||||
*
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func);
|
||||
int ns9360_gpio_get_value(unsigned gpio);
|
||||
void ns9360_gpio_set_value(unsigned gpio, int value);
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/gpio.c
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -15,12 +15,13 @@
|
|||
|
||||
#include <asm/arch-ns9xxx/gpio.h>
|
||||
#include <asm/arch-ns9xxx/processor.h>
|
||||
#include <asm/arch-ns9xxx/regs-bbu.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch-ns9xxx/processor-ns9360.h>
|
||||
#include <asm/bug.h>
|
||||
#include <asm/types.h>
|
||||
#include <asm/bitops.h>
|
||||
|
||||
#include "gpio-ns9360.h"
|
||||
|
||||
#if defined(CONFIG_PROCESSOR_NS9360)
|
||||
#define GPIO_MAX 72
|
||||
#elif defined(CONFIG_PROCESSOR_NS9750)
|
||||
|
|
@ -45,41 +46,10 @@ static inline int ns9xxx_valid_gpio(unsigned gpio)
|
|||
return gpio <= 49;
|
||||
else
|
||||
#endif
|
||||
{
|
||||
BUG();
|
||||
}
|
||||
|
||||
static inline void __iomem *ns9xxx_gpio_get_gconfaddr(unsigned gpio)
|
||||
{
|
||||
if (gpio < 56)
|
||||
return BBU_GCONFb1(gpio / 8);
|
||||
else
|
||||
/*
|
||||
* this could be optimised away on
|
||||
* ns9750 only builds, but it isn't ...
|
||||
*/
|
||||
return BBU_GCONFb2((gpio - 56) / 8);
|
||||
}
|
||||
|
||||
static inline void __iomem *ns9xxx_gpio_get_gctrladdr(unsigned gpio)
|
||||
{
|
||||
if (gpio < 32)
|
||||
return BBU_GCTRL1;
|
||||
else if (gpio < 64)
|
||||
return BBU_GCTRL2;
|
||||
else
|
||||
/* this could be optimised away on ns9750 only builds */
|
||||
return BBU_GCTRL3;
|
||||
}
|
||||
|
||||
static inline void __iomem *ns9xxx_gpio_get_gstataddr(unsigned gpio)
|
||||
{
|
||||
if (gpio < 32)
|
||||
return BBU_GSTAT1;
|
||||
else if (gpio < 64)
|
||||
return BBU_GSTAT2;
|
||||
else
|
||||
/* this could be optimised away on ns9750 only builds */
|
||||
return BBU_GSTAT3;
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
int gpio_request(unsigned gpio, const char *label)
|
||||
|
|
@ -98,49 +68,24 @@ void gpio_free(unsigned gpio)
|
|||
}
|
||||
EXPORT_SYMBOL(gpio_free);
|
||||
|
||||
/*
|
||||
* each gpio can serve for 4 different purposes [0..3]. These are called
|
||||
* "functions" and passed in the parameter func. Functions 0-2 are always some
|
||||
* special things, function 3 is GPIO. If func == 3 dir specifies input or
|
||||
* output, and with inv you can enable an inverter (independent of func).
|
||||
*/
|
||||
static int __ns9xxx_gpio_configure(unsigned gpio, int dir, int inv, int func)
|
||||
{
|
||||
void __iomem *conf = ns9xxx_gpio_get_gconfaddr(gpio);
|
||||
u32 confval;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&gpio_lock, flags);
|
||||
|
||||
confval = __raw_readl(conf);
|
||||
REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir);
|
||||
REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv);
|
||||
REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func);
|
||||
__raw_writel(confval, conf);
|
||||
|
||||
spin_unlock_irqrestore(&gpio_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int ns9xxx_gpio_configure(unsigned gpio, int inv, int func)
|
||||
{
|
||||
if (likely(ns9xxx_valid_gpio(gpio))) {
|
||||
if (func == 3) {
|
||||
printk(KERN_WARNING "use gpio_direction_input "
|
||||
"or gpio_direction_output\n");
|
||||
return -EINVAL;
|
||||
} else
|
||||
return __ns9xxx_gpio_configure(gpio, 0, inv, func);
|
||||
} else
|
||||
return -EINVAL;
|
||||
}
|
||||
EXPORT_SYMBOL(ns9xxx_gpio_configure);
|
||||
|
||||
int gpio_direction_input(unsigned gpio)
|
||||
{
|
||||
if (likely(ns9xxx_valid_gpio(gpio))) {
|
||||
return __ns9xxx_gpio_configure(gpio, 0, 0, 3);
|
||||
int ret = -EINVAL;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&gpio_lock, flags);
|
||||
#if defined(CONFIG_PROCESSOR_NS9360)
|
||||
if (processor_is_ns9360())
|
||||
ret = __ns9360_gpio_configure(gpio, 0, 0, 3);
|
||||
else
|
||||
#endif
|
||||
BUG();
|
||||
|
||||
spin_unlock_irqrestore(&gpio_lock, flags);
|
||||
|
||||
return ret;
|
||||
|
||||
} else
|
||||
return -EINVAL;
|
||||
}
|
||||
|
|
@ -149,9 +94,22 @@ EXPORT_SYMBOL(gpio_direction_input);
|
|||
int gpio_direction_output(unsigned gpio, int value)
|
||||
{
|
||||
if (likely(ns9xxx_valid_gpio(gpio))) {
|
||||
int ret = -EINVAL;
|
||||
unsigned long flags;
|
||||
|
||||
gpio_set_value(gpio, value);
|
||||
|
||||
return __ns9xxx_gpio_configure(gpio, 1, 0, 3);
|
||||
spin_lock_irqsave(&gpio_lock, flags);
|
||||
#if defined(CONFIG_PROCESSOR_NS9360)
|
||||
if (processor_is_ns9360())
|
||||
ret = __ns9360_gpio_configure(gpio, 1, 0, 3);
|
||||
else
|
||||
#endif
|
||||
BUG();
|
||||
|
||||
spin_unlock_irqrestore(&gpio_lock, flags);
|
||||
|
||||
return ret;
|
||||
} else
|
||||
return -EINVAL;
|
||||
}
|
||||
|
|
@ -159,31 +117,28 @@ EXPORT_SYMBOL(gpio_direction_output);
|
|||
|
||||
int gpio_get_value(unsigned gpio)
|
||||
{
|
||||
void __iomem *stat = ns9xxx_gpio_get_gstataddr(gpio);
|
||||
int ret;
|
||||
|
||||
ret = 1 & (__raw_readl(stat) >> (gpio & 31));
|
||||
|
||||
return ret;
|
||||
#if defined(CONFIG_PROCESSOR_NS9360)
|
||||
if (processor_is_ns9360())
|
||||
return ns9360_gpio_get_value(gpio);
|
||||
else
|
||||
#endif
|
||||
{
|
||||
BUG();
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
EXPORT_SYMBOL(gpio_get_value);
|
||||
|
||||
void gpio_set_value(unsigned gpio, int value)
|
||||
{
|
||||
void __iomem *ctrl = ns9xxx_gpio_get_gctrladdr(gpio);
|
||||
u32 ctrlval;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&gpio_lock, flags);
|
||||
|
||||
ctrlval = __raw_readl(ctrl);
|
||||
|
||||
if (value)
|
||||
ctrlval |= 1 << (gpio & 31);
|
||||
#if defined(CONFIG_PROCESSOR_NS9360)
|
||||
if (processor_is_ns9360())
|
||||
ns9360_gpio_set_value(gpio, value);
|
||||
else
|
||||
ctrlval &= ~(1 << (gpio & 31));
|
||||
|
||||
__raw_writel(ctrlval, ctrl);
|
||||
#endif
|
||||
BUG();
|
||||
|
||||
spin_unlock_irqrestore(&gpio_lock, flags);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@
|
|||
#include <asm/io.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys-common.h>
|
||||
#include <asm/arch-ns9xxx/irqs.h>
|
||||
#include <asm/arch-ns9xxx/board.h>
|
||||
|
||||
|
|
@ -67,7 +67,7 @@ void __init ns9xxx_init_irq(void)
|
|||
for (i = 0; i < 32; ++i)
|
||||
__raw_writel(i, SYS_IVA(i));
|
||||
|
||||
for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) {
|
||||
for (i = 0; i <= 31; ++i) {
|
||||
set_irq_chip(i, &ns9xxx_chip);
|
||||
set_irq_handler(i, handle_level_irq);
|
||||
set_irq_flags(i, IRQF_VALID);
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -11,12 +11,14 @@
|
|||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <asm/arch-ns9xxx/processor-ns9360.h>
|
||||
|
||||
#include "board-a9m9750dev.h"
|
||||
#include "generic.h"
|
||||
|
||||
static void __init mach_cc9p9360dev_map_io(void)
|
||||
{
|
||||
ns9xxx_map_io();
|
||||
ns9360_map_io();
|
||||
board_a9m9750dev_map_io();
|
||||
}
|
||||
|
||||
|
|
@ -36,6 +38,6 @@ MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard")
|
|||
.map_io = mach_cc9p9360dev_map_io,
|
||||
.init_irq = mach_cc9p9360dev_init_irq,
|
||||
.init_machine = mach_cc9p9360dev_init_machine,
|
||||
.timer = &ns9xxx_timer,
|
||||
.timer = &ns9360_timer,
|
||||
.boot_params = 0x100,
|
||||
MACHINE_END
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/mach-cc9p9360js.c
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -11,6 +11,8 @@
|
|||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <asm/arch-ns9xxx/processor-ns9360.h>
|
||||
|
||||
#include "board-jscc9p9360.h"
|
||||
#include "generic.h"
|
||||
|
||||
|
|
@ -21,9 +23,9 @@ static void __init mach_cc9p9360js_init_machine(void)
|
|||
}
|
||||
|
||||
MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard")
|
||||
.map_io = ns9xxx_map_io,
|
||||
.map_io = ns9360_map_io,
|
||||
.init_irq = ns9xxx_init_irq,
|
||||
.init_machine = mach_cc9p9360js_init_machine,
|
||||
.timer = &ns9xxx_timer,
|
||||
.timer = &ns9360_timer,
|
||||
.boot_params = 0x100,
|
||||
MACHINE_END
|
||||
|
|
|
|||
54
arch/arm/mach-ns9xxx/processor-ns9360.c
Normal file
54
arch/arm/mach-ns9xxx/processor-ns9360.c
Normal file
|
|
@ -0,0 +1,54 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/processor-ns9360.c
|
||||
*
|
||||
* Copyright (C) 2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <asm/page.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/arch-ns9xxx/processor-ns9360.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
|
||||
|
||||
void ns9360_reset(char mode)
|
||||
{
|
||||
u32 reg;
|
||||
|
||||
reg = __raw_readl(SYS_PLL) >> 16;
|
||||
REGSET(reg, SYS_PLL, SWC, YES);
|
||||
__raw_writel(reg, SYS_PLL);
|
||||
}
|
||||
|
||||
#define CRYSTAL 29491200 /* Hz */
|
||||
unsigned long ns9360_systemclock(void)
|
||||
{
|
||||
u32 pll = __raw_readl(SYS_PLL);
|
||||
return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1)
|
||||
>> REGGETIM(pll, SYS_PLL, FS);
|
||||
}
|
||||
|
||||
static struct map_desc ns9360_io_desc[] __initdata = {
|
||||
{ /* BBus */
|
||||
.virtual = io_p2v(0x90000000),
|
||||
.pfn = __phys_to_pfn(0x90000000),
|
||||
.length = 0x00700000,
|
||||
.type = MT_DEVICE,
|
||||
}, { /* AHB */
|
||||
.virtual = io_p2v(0xa0100000),
|
||||
.pfn = __phys_to_pfn(0xa0100000),
|
||||
.length = 0x00900000,
|
||||
.type = MT_DEVICE,
|
||||
},
|
||||
};
|
||||
|
||||
void __init ns9360_map_io(void)
|
||||
{
|
||||
iotable_init(ns9360_io_desc, ARRAY_SIZE(ns9360_io_desc));
|
||||
}
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* arch/arm/mach-ns9xxx/time.c
|
||||
* arch/arm/mach-ns9xxx/time-ns9360.c
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -15,8 +15,8 @@
|
|||
#include <linux/clocksource.h>
|
||||
#include <linux/clockchips.h>
|
||||
|
||||
#include <asm/arch-ns9xxx/regs-sys.h>
|
||||
#include <asm/arch-ns9xxx/clock.h>
|
||||
#include <asm/arch-ns9xxx/processor-ns9360.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
|
||||
#include <asm/arch-ns9xxx/irqs.h>
|
||||
#include <asm/arch/system.h>
|
||||
#include "generic.h"
|
||||
|
|
@ -25,26 +25,26 @@
|
|||
#define TIMER_CLOCKEVENT 1
|
||||
static u32 latch;
|
||||
|
||||
static cycle_t ns9xxx_clocksource_read(void)
|
||||
static cycle_t ns9360_clocksource_read(void)
|
||||
{
|
||||
return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
|
||||
}
|
||||
|
||||
static struct clocksource ns9xxx_clocksource = {
|
||||
.name = "ns9xxx-timer" __stringify(TIMER_CLOCKSOURCE),
|
||||
static struct clocksource ns9360_clocksource = {
|
||||
.name = "ns9360-timer" __stringify(TIMER_CLOCKSOURCE),
|
||||
.rating = 300,
|
||||
.read = ns9xxx_clocksource_read,
|
||||
.read = ns9360_clocksource_read,
|
||||
.mask = CLOCKSOURCE_MASK(32),
|
||||
.shift = 20,
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
static void ns9xxx_clockevent_setmode(enum clock_event_mode mode,
|
||||
static void ns9360_clockevent_setmode(enum clock_event_mode mode,
|
||||
struct clock_event_device *clk)
|
||||
{
|
||||
u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
|
||||
|
||||
switch(mode) {
|
||||
switch (mode) {
|
||||
case CLOCK_EVT_MODE_PERIODIC:
|
||||
__raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT));
|
||||
REGSET(tc, SYS_TCx, REN, EN);
|
||||
|
|
@ -69,7 +69,7 @@ static void ns9xxx_clockevent_setmode(enum clock_event_mode mode,
|
|||
__raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
|
||||
}
|
||||
|
||||
static int ns9xxx_clockevent_setnextevent(unsigned long evt,
|
||||
static int ns9360_clockevent_setnextevent(unsigned long evt,
|
||||
struct clock_event_device *clk)
|
||||
{
|
||||
u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
|
||||
|
|
@ -88,20 +88,20 @@ static int ns9xxx_clockevent_setnextevent(unsigned long evt,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static struct clock_event_device ns9xxx_clockevent_device = {
|
||||
.name = "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT),
|
||||
static struct clock_event_device ns9360_clockevent_device = {
|
||||
.name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT),
|
||||
.shift = 20,
|
||||
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
||||
.set_mode = ns9xxx_clockevent_setmode,
|
||||
.set_next_event = ns9xxx_clockevent_setnextevent,
|
||||
.set_mode = ns9360_clockevent_setmode,
|
||||
.set_next_event = ns9360_clockevent_setnextevent,
|
||||
};
|
||||
|
||||
static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id)
|
||||
static irqreturn_t ns9360_clockevent_handler(int irq, void *dev_id)
|
||||
{
|
||||
int timerno = irq - IRQ_TIMER0;
|
||||
int timerno = irq - IRQ_NS9360_TIMER0;
|
||||
u32 tc;
|
||||
|
||||
struct clock_event_device *evt = &ns9xxx_clockevent_device;
|
||||
struct clock_event_device *evt = &ns9360_clockevent_device;
|
||||
|
||||
/* clear irq */
|
||||
tc = __raw_readl(SYS_TC(timerno));
|
||||
|
|
@ -119,13 +119,13 @@ static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id)
|
|||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct irqaction ns9xxx_clockevent_action = {
|
||||
.name = "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT),
|
||||
static struct irqaction ns9360_clockevent_action = {
|
||||
.name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT),
|
||||
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
||||
.handler = ns9xxx_clockevent_handler,
|
||||
.handler = ns9360_clockevent_handler,
|
||||
};
|
||||
|
||||
static void __init ns9xxx_timer_init(void)
|
||||
static void __init ns9360_timer_init(void)
|
||||
{
|
||||
int tc;
|
||||
|
||||
|
|
@ -148,12 +148,12 @@ static void __init ns9xxx_timer_init(void)
|
|||
|
||||
__raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE));
|
||||
|
||||
ns9xxx_clocksource.mult = clocksource_hz2mult(ns9xxx_cpuclock(),
|
||||
ns9xxx_clocksource.shift);
|
||||
ns9360_clocksource.mult = clocksource_hz2mult(ns9360_cpuclock(),
|
||||
ns9360_clocksource.shift);
|
||||
|
||||
clocksource_register(&ns9xxx_clocksource);
|
||||
clocksource_register(&ns9360_clocksource);
|
||||
|
||||
latch = SH_DIV(ns9xxx_cpuclock(), HZ, 0);
|
||||
latch = SH_DIV(ns9360_cpuclock(), HZ, 0);
|
||||
|
||||
tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
|
||||
REGSET(tc, SYS_TCx, TEN, DIS);
|
||||
|
|
@ -166,19 +166,20 @@ static void __init ns9xxx_timer_init(void)
|
|||
REGSET(tc, SYS_TCx, REN, EN);
|
||||
__raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
|
||||
|
||||
ns9xxx_clockevent_device.mult = div_sc(ns9xxx_cpuclock(),
|
||||
NSEC_PER_SEC, ns9xxx_clockevent_device.shift);
|
||||
ns9xxx_clockevent_device.max_delta_ns =
|
||||
clockevent_delta2ns(-1, &ns9xxx_clockevent_device);
|
||||
ns9xxx_clockevent_device.min_delta_ns =
|
||||
clockevent_delta2ns(1, &ns9xxx_clockevent_device);
|
||||
ns9360_clockevent_device.mult = div_sc(ns9360_cpuclock(),
|
||||
NSEC_PER_SEC, ns9360_clockevent_device.shift);
|
||||
ns9360_clockevent_device.max_delta_ns =
|
||||
clockevent_delta2ns(-1, &ns9360_clockevent_device);
|
||||
ns9360_clockevent_device.min_delta_ns =
|
||||
clockevent_delta2ns(1, &ns9360_clockevent_device);
|
||||
|
||||
ns9xxx_clockevent_device.cpumask = cpumask_of_cpu(0);
|
||||
clockevents_register_device(&ns9xxx_clockevent_device);
|
||||
ns9360_clockevent_device.cpumask = cpumask_of_cpu(0);
|
||||
clockevents_register_device(&ns9360_clockevent_device);
|
||||
|
||||
setup_irq(IRQ_TIMER0 + TIMER_CLOCKEVENT, &ns9xxx_clockevent_action);
|
||||
setup_irq(IRQ_NS9360_TIMER0 + TIMER_CLOCKEVENT,
|
||||
&ns9360_clockevent_action);
|
||||
}
|
||||
|
||||
struct sys_timer ns9xxx_timer = {
|
||||
.init = ns9xxx_timer_init,
|
||||
struct sys_timer ns9360_timer = {
|
||||
.init = ns9360_timer_init,
|
||||
};
|
||||
|
|
@ -1,71 +0,0 @@
|
|||
/*
|
||||
* include/asm-arm/arch-ns9xxx/clock.h
|
||||
*
|
||||
* Copyright (C) 2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
#ifndef __ASM_ARCH_CLOCK_H
|
||||
#define __ASM_ARCH_CLOCK_H
|
||||
|
||||
#include <asm/arch-ns9xxx/regs-sys.h>
|
||||
|
||||
#define CRYSTAL 29491200 /* Hz */
|
||||
|
||||
/* The HRM calls this value f_vco */
|
||||
static inline u32 ns9xxx_systemclock(void) __attribute__((const));
|
||||
static inline u32 ns9xxx_systemclock(void)
|
||||
{
|
||||
u32 pll = __raw_readl(SYS_PLL);
|
||||
|
||||
/*
|
||||
* The system clock should be a multiple of HZ * TIMERCLOCKSELECT (in
|
||||
* time.c).
|
||||
*
|
||||
* The following values are given:
|
||||
* - TIMERCLOCKSELECT == 2^i for an i in {0 .. 6}
|
||||
* - CRYSTAL == 29491200 == 2^17 * 3^2 * 5^2
|
||||
* - ND in {0 .. 31}
|
||||
* - FS in {0 .. 3}
|
||||
*
|
||||
* Assuming the worst, we consider:
|
||||
* - TIMERCLOCKSELECT == 64
|
||||
* - ND == 0
|
||||
* - FS == 3
|
||||
*
|
||||
* So HZ should be a divisor of:
|
||||
* (CRYSTAL * (ND + 1) >> FS) / TIMERCLOCKSELECT
|
||||
* == (2^17 * 3^2 * 5^2 * 1 >> 3) / 64
|
||||
* == 2^8 * 3^2 * 5^2
|
||||
* == 57600
|
||||
*
|
||||
* Currently HZ is defined to be 100 for this platform.
|
||||
*
|
||||
* Fine.
|
||||
*/
|
||||
return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1)
|
||||
>> REGGETIM(pll, SYS_PLL, FS);
|
||||
}
|
||||
|
||||
static inline u32 ns9xxx_cpuclock(void) __attribute__((const));
|
||||
static inline u32 ns9xxx_cpuclock(void)
|
||||
{
|
||||
return ns9xxx_systemclock() / 2;
|
||||
}
|
||||
|
||||
static inline u32 ns9xxx_ahbclock(void) __attribute__((const));
|
||||
static inline u32 ns9xxx_ahbclock(void)
|
||||
{
|
||||
return ns9xxx_systemclock() / 4;
|
||||
}
|
||||
|
||||
static inline u32 ns9xxx_bbusclock(void) __attribute__((const));
|
||||
static inline u32 ns9xxx_bbusclock(void)
|
||||
{
|
||||
return ns9xxx_systemclock() / 8;
|
||||
}
|
||||
|
||||
#endif /* ifndef __ASM_ARCH_CLOCK_H */
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* include/asm-arm/arch-ns9xxx/entry-macro.S
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -9,7 +9,7 @@
|
|||
* the Free Software Foundation.
|
||||
*/
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys-common.h>
|
||||
|
||||
.macro get_irqnr_preamble, base, tmp
|
||||
ldr \base, =SYS_ISRADDR
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* include/asm-arm/arch-ns9xxx/irqs.h
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -11,38 +11,39 @@
|
|||
#ifndef __ASM_ARCH_IRQS_H
|
||||
#define __ASM_ARCH_IRQS_H
|
||||
|
||||
#define IRQ_WATCHDOG 0
|
||||
#define IRQ_AHBBUSERR 1
|
||||
#define IRQ_BBUSAGG 2
|
||||
/* NetSilicon 9360 */
|
||||
#define IRQ_NS9XXX_WATCHDOG 0
|
||||
#define IRQ_NS9XXX_AHBBUSERR 1
|
||||
#define IRQ_NS9360_BBUSAGG 2
|
||||
/* irq 3 is reserved for NS9360 */
|
||||
#define IRQ_ETHRX 4
|
||||
#define IRQ_ETHTX 5
|
||||
#define IRQ_ETHPHY 6
|
||||
#define IRQ_LCD 7
|
||||
#define IRQ_SERBRX 8
|
||||
#define IRQ_SERBTX 9
|
||||
#define IRQ_SERARX 10
|
||||
#define IRQ_SERATX 11
|
||||
#define IRQ_SERCRX 12
|
||||
#define IRQ_SERCTX 13
|
||||
#define IRQ_I2C 14
|
||||
#define IRQ_BBUSDMA 15
|
||||
#define IRQ_TIMER0 16
|
||||
#define IRQ_TIMER1 17
|
||||
#define IRQ_TIMER2 18
|
||||
#define IRQ_TIMER3 19
|
||||
#define IRQ_TIMER4 20
|
||||
#define IRQ_TIMER5 21
|
||||
#define IRQ_TIMER6 22
|
||||
#define IRQ_TIMER7 23
|
||||
#define IRQ_RTC 24
|
||||
#define IRQ_USBHOST 25
|
||||
#define IRQ_USBDEVICE 26
|
||||
#define IRQ_IEEE1284 27
|
||||
#define IRQ_EXT0 28
|
||||
#define IRQ_EXT1 29
|
||||
#define IRQ_EXT2 30
|
||||
#define IRQ_EXT3 31
|
||||
#define IRQ_NS9XXX_ETHRX 4
|
||||
#define IRQ_NS9XXX_ETHTX 5
|
||||
#define IRQ_NS9XXX_ETHPHY 6
|
||||
#define IRQ_NS9360_LCD 7
|
||||
#define IRQ_NS9360_SERBRX 8
|
||||
#define IRQ_NS9360_SERBTX 9
|
||||
#define IRQ_NS9360_SERARX 10
|
||||
#define IRQ_NS9360_SERATX 11
|
||||
#define IRQ_NS9360_SERCRX 12
|
||||
#define IRQ_NS9360_SERCTX 13
|
||||
#define IRQ_NS9360_I2C 14
|
||||
#define IRQ_NS9360_BBUSDMA 15
|
||||
#define IRQ_NS9360_TIMER0 16
|
||||
#define IRQ_NS9360_TIMER1 17
|
||||
#define IRQ_NS9360_TIMER2 18
|
||||
#define IRQ_NS9360_TIMER3 19
|
||||
#define IRQ_NS9360_TIMER4 20
|
||||
#define IRQ_NS9360_TIMER5 21
|
||||
#define IRQ_NS9360_TIMER6 22
|
||||
#define IRQ_NS9360_TIMER7 23
|
||||
#define IRQ_NS9360_RTC 24
|
||||
#define IRQ_NS9360_USBHOST 25
|
||||
#define IRQ_NS9360_USBDEVICE 26
|
||||
#define IRQ_NS9360_IEEE1284 27
|
||||
#define IRQ_NS9XXX_EXT0 28
|
||||
#define IRQ_NS9XXX_EXT1 29
|
||||
#define IRQ_NS9XXX_EXT2 30
|
||||
#define IRQ_NS9XXX_EXT3 31
|
||||
|
||||
#define BBUS_IRQ(irq) (32 + irq)
|
||||
|
||||
|
|
@ -67,7 +68,7 @@
|
|||
/*
|
||||
* these Interrupts are specific for the a9m9750dev board.
|
||||
* They are generated by an FPGA that interrupts the CPU on
|
||||
* IRQ_EXT2
|
||||
* IRQ_NS9360_EXT2
|
||||
*/
|
||||
#define FPGA_IRQ(irq) (64 + irq)
|
||||
|
||||
|
|
|
|||
32
include/asm-arm/arch-ns9xxx/processor-ns9360.h
Normal file
32
include/asm-arm/arch-ns9xxx/processor-ns9360.h
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
/*
|
||||
* include/asm-arm/arch-ns9xxx/processor-ns9360.h
|
||||
*
|
||||
* Copyright (C) 2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
#ifndef __ASM_ARCH_PROCESSORNS9360_H
|
||||
#define __ASM_ARCH_PROCESSORNS9360_H
|
||||
|
||||
#include <linux/init.h>
|
||||
|
||||
void ns9360_reset(char mode);
|
||||
|
||||
unsigned long ns9360_systemclock(void) __attribute__((const));
|
||||
|
||||
static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
|
||||
static inline unsigned long ns9360_cpuclock(void)
|
||||
{
|
||||
return ns9360_systemclock() / 2;
|
||||
}
|
||||
|
||||
void __init ns9360_map_io(void);
|
||||
|
||||
extern struct sys_timer ns9360_timer;
|
||||
|
||||
int ns9360_gpio_configure(unsigned gpio, int inv, int func);
|
||||
|
||||
#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
|
||||
31
include/asm-arm/arch-ns9xxx/regs-sys-common.h
Normal file
31
include/asm-arm/arch-ns9xxx/regs-sys-common.h
Normal file
|
|
@ -0,0 +1,31 @@
|
|||
/*
|
||||
* include/asm-arm/arch-ns9xxx/regs-sys-common.h
|
||||
*
|
||||
* Copyright (C) 2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_REGSSYSCOMMON_H
|
||||
#define __ASM_ARCH_REGSSYSCOMMON_H
|
||||
#include <asm/hardware.h>
|
||||
|
||||
/* Interrupt Vector Address Register Level x */
|
||||
#define SYS_IVA(x) __REG2(0xa09000c4, (x))
|
||||
|
||||
/* Interrupt Configuration registers */
|
||||
#define SYS_IC(x) __REG2(0xa0900144, (x))
|
||||
|
||||
/* ISRADDR */
|
||||
#define SYS_ISRADDR __REG(0xa0900164)
|
||||
|
||||
/* Interrupt Status Active */
|
||||
#define SYS_ISA __REG(0xa0900168)
|
||||
|
||||
/* Interrupt Status Raw */
|
||||
#define SYS_ISR __REG(0xa090016c)
|
||||
|
||||
#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
|
||||
|
|
@ -1,15 +1,15 @@
|
|||
/*
|
||||
* include/asm-arm/arch-ns9xxx/regs-sys.h
|
||||
* include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
#ifndef __ASM_ARCH_REGSSYS_H
|
||||
#define __ASM_ARCH_REGSSYS_H
|
||||
#ifndef __ASM_ARCH_REGSSYSNS9360_H
|
||||
#define __ASM_ARCH_REGSSYSNS9360_H
|
||||
|
||||
#include <asm/hardware.h>
|
||||
|
||||
|
|
@ -27,21 +27,6 @@
|
|||
/* Timer x Read register */
|
||||
#define SYS_TR(x) __REG2(0xa0900084, (x))
|
||||
|
||||
/* Interrupt Vector Address Register Level x */
|
||||
#define SYS_IVA(x) __REG2(0xa09000c4, (x))
|
||||
|
||||
/* Interrupt Configuration registers */
|
||||
#define SYS_IC(x) __REG2(0xa0900144, (x))
|
||||
|
||||
/* ISRADDR */
|
||||
#define SYS_ISRADDR __REG(0xa0900164)
|
||||
|
||||
/* Interrupt Status Active */
|
||||
#define SYS_ISA __REG(0xa0900168)
|
||||
|
||||
/* Interrupt Status Raw */
|
||||
#define SYS_ISR __REG(0xa090016c)
|
||||
|
||||
/* Timer Interrupt Status register */
|
||||
#define SYS_TIS __REG(0xa0900170)
|
||||
|
||||
|
|
@ -160,4 +145,4 @@
|
|||
#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0)
|
||||
#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1)
|
||||
|
||||
#endif /* ifndef __ASM_ARCH_REGSSYS_H */
|
||||
#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* include/asm-arm/arch-ns9xxx/system.h
|
||||
*
|
||||
* Copyright (C) 2006 by Digi International Inc.
|
||||
* Copyright (C) 2006,2007 by Digi International Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -12,8 +12,8 @@
|
|||
#define __ASM_ARCH_SYSTEM_H
|
||||
|
||||
#include <asm/proc-fns.h>
|
||||
#include <asm/arch-ns9xxx/regs-sys.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/arch-ns9xxx/processor.h>
|
||||
#include <asm/arch-ns9xxx/processor-ns9360.h>
|
||||
|
||||
static inline void arch_idle(void)
|
||||
{
|
||||
|
|
@ -22,11 +22,12 @@ static inline void arch_idle(void)
|
|||
|
||||
static inline void arch_reset(char mode)
|
||||
{
|
||||
u32 reg;
|
||||
|
||||
reg = __raw_readl(SYS_PLL) >> 16;
|
||||
REGSET(reg, SYS_PLL, SWC, YES);
|
||||
__raw_writel(reg, SYS_PLL);
|
||||
#ifdef CONFIG_PROCESSOR_NS9360
|
||||
if (processor_is_ns9360())
|
||||
ns9360_reset(mode);
|
||||
else
|
||||
#endif
|
||||
BUG();
|
||||
|
||||
BUG();
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in a new issue