adulau/aha
1
0
Fork 0
mirror of https://github.com/adulau/aha.git synced 2024-12-27 19:26:25 +00:00
Code Issues Projects Releases Packages Wiki Activity

[PATCH] clocksource init adjustments (fix bug #7426)

Browse source 
This patch resolves the issue found here:
http://bugme.osdl.org/show_bug.cgi?id=7426

The basic summary is:
Currently we register most of i386/x86_64 clocksources at module_init
time. Then we enable clocksource selection at late_initcall time. This
causes some problems for drivers that use gettimeofday for init
calibration routines (specifically the es1968 driver in this case),
where durring module_init, the only clocksource available is the low-res
jiffies clocksource. This may cause slight calibration errors, due to
the small sampling time used.

It should be noted that drivers that require fine grained time may not
function on architectures that do not have better then jiffies
resolution timekeeping (there are a few). However, this does not
discount the reasonable need for such fine-grained timekeeping at init
time.

Thus the solution here is to register clocksources earlier (ideally when
the hardware is being initialized), and then we enable clocksource
selection at fs_initcall (before device_initcall).

This patch should probably get some testing time in -mm, since
clocksource selection is one of the most important issues for correct
timekeeping, and I've only been able to test this on a few of my own
boxes.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
john stultz 2007-03-05 00:30:50 -08:00 committed by Linus Torvalds
parent 4540768011
commit 6bb74df481
12 changed files with 135 additions and 166 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

80
arch/i386/kernel/hpet.c
View file

@ -200,6 +200,23 @@ static int hpet_next_event(unsigned long delta,
return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0);
}
/*
* Clock source related code
*/
static cycle_t read_hpet(void)
{
return (cycle_t)hpet_readl(HPET_COUNTER);
}
static struct clocksource clocksource_hpet = {
.name = "hpet",
.rating = 250,
.read = read_hpet,
.mask = HPET_MASK,
.shift = HPET_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
* Try to setup the HPET timer
*/
@ -207,6 +224,7 @@ int __init hpet_enable(void)
{
unsigned long id;
uint64_t hpet_freq;
u64 tmp;
if (!is_hpet_capable())
return 0;
@ -253,6 +271,25 @@ int __init hpet_enable(void)
/* Start the counter */
hpet_start_counter();
/* Initialize and register HPET clocksource
*
* hpet period is in femto seconds per cycle
* so we need to convert this to ns/cyc units
* aproximated by mult/2^shift
*
* fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
* fsec/cyc * 1ns/1000000fsec * 2^shift = mult
* fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
* (fsec/cyc << shift)/1000000 = mult
* (hpet_period << shift)/FSEC_PER_NSEC = mult
*/
tmp = (u64)hpet_period << HPET_SHIFT;
do_div(tmp, FSEC_PER_NSEC);
clocksource_hpet.mult = (u32)tmp;
clocksource_register(&clocksource_hpet);
if (id & HPET_ID_LEGSUP) {
hpet_enable_int();
hpet_reserve_platform_timers(id);
@ -273,49 +310,6 @@ out_nohpet:
return 0;
}
/*
* Clock source related code
*/
static cycle_t read_hpet(void)
{
return (cycle_t)hpet_readl(HPET_COUNTER);
}
static struct clocksource clocksource_hpet = {
.name = "hpet",
.rating = 250,
.read = read_hpet,
.mask = HPET_MASK,
.shift = HPET_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init init_hpet_clocksource(void)
{
u64 tmp;
if (!hpet_virt_address)
return -ENODEV;
/*
* hpet period is in femto seconds per cycle
* so we need to convert this to ns/cyc units
* aproximated by mult/2^shift
*
* fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
* fsec/cyc * 1ns/1000000fsec * 2^shift = mult
* fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
* (fsec/cyc << shift)/1000000 = mult
* (hpet_period << shift)/FSEC_PER_NSEC = mult
*/
tmp = (u64)hpet_period << HPET_SHIFT;
do_div(tmp, FSEC_PER_NSEC);
clocksource_hpet.mult = (u32)tmp;
return clocksource_register(&clocksource_hpet);
}
module_init(init_hpet_clocksource);
#ifdef CONFIG_HPET_EMULATE_RTC

2
arch/i386/kernel/i8253.c
View file

@ -195,4 +195,4 @@ static int __init init_pit_clocksource(void)
clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
return clocksource_register(&clocksource_pit);
}
module_init(init_pit_clocksource);
arch_initcall(init_pit_clocksource);

1
arch/i386/kernel/setup.c
View file

@ -657,5 +657,4 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &dummy_con;
#endif
#endif
tsc_init();
}

1
arch/i386/kernel/time.c
View file

@ -279,5 +279,6 @@ void __init hpet_time_init(void)
*/
void __init time_init(void)
{
tsc_init();
late_time_init = choose_time_init();
}

83
arch/i386/kernel/tsc.c
View file

@ -184,34 +184,6 @@ int recalibrate_cpu_khz(void)
EXPORT_SYMBOL(recalibrate_cpu_khz);
void __init tsc_init(void)
{
if (!cpu_has_tsc || tsc_disable)
goto out_no_tsc;
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz)
goto out_no_tsc;
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
set_cyc2ns_scale(cpu_khz);
use_tsc_delay();
return;
out_no_tsc:
/*
* Set the tsc_disable flag if there's no TSC support, this
* makes it a fast flag for the kernel to see whether it
* should be using the TSC.
*/
tsc_disable = 1;
}
#ifdef CONFIG_CPU_FREQ
/*
@ -381,28 +353,47 @@ static void __init check_geode_tsc_reliable(void)
static inline void check_geode_tsc_reliable(void) { }
#endif
static int __init init_tsc_clocksource(void)
void __init tsc_init(void)
{
if (!cpu_has_tsc || tsc_disable)
goto out_no_tsc;
if (cpu_has_tsc && tsc_khz && !tsc_disable) {
/* check blacklist */
dmi_check_system(bad_tsc_dmi_table);
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
unsynchronized_tsc();
check_geode_tsc_reliable();
current_tsc_khz = tsc_khz;
clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
if (!cpu_khz)
goto out_no_tsc;
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
set_cyc2ns_scale(cpu_khz);
use_tsc_delay();
/* Check and install the TSC clocksource */
dmi_check_system(bad_tsc_dmi_table);
unsynchronized_tsc();
check_geode_tsc_reliable();
current_tsc_khz = tsc_khz;
clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
clocksource_tsc.shift);
/* lower the rating if we already know its unstable: */
if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
}
return clocksource_register(&clocksource_tsc);
/* lower the rating if we already know its unstable: */
if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
}
clocksource_register(&clocksource_tsc);
return 0;
return;
out_no_tsc:
/*
* Set the tsc_disable flag if there's no TSC support, this
* makes it a fast flag for the kernel to see whether it
* should be using the TSC.
*/
tsc_disable = 1;
}
module_init(init_tsc_clocksource);

109
arch/x86_64/kernel/hpet.c
View file

@ -12,6 +12,12 @@
#include <asm/timex.h>
#include <asm/hpet.h>
#define HPET_MASK 0xFFFFFFFF
#define HPET_SHIFT 22
/* FSEC = 10^-15 NSEC = 10^-9 */
#define FSEC_PER_NSEC 1000000
int nohpet __initdata;
unsigned long hpet_address;
@ -106,9 +112,31 @@ int hpet_timer_stop_set_go(unsigned long tick)
return 0;
}
static cycle_t read_hpet(void)
{
return (cycle_t)hpet_readl(HPET_COUNTER);
}
static cycle_t __vsyscall_fn vread_hpet(void)
{
return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
}
struct clocksource clocksource_hpet = {
.name = "hpet",
.rating = 250,
.read = read_hpet,
.mask = (cycle_t)HPET_MASK,
.mult = 0, /* set below */
.shift = HPET_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.vread = vread_hpet,
};
int hpet_arch_init(void)
{
unsigned int id;
u64 tmp;
if (!hpet_address)
return -1;
@ -132,6 +160,22 @@ int hpet_arch_init(void)
hpet_use_timer = (id & HPET_ID_LEGSUP);
/*
* hpet period is in femto seconds per cycle
* so we need to convert this to ns/cyc units
* aproximated by mult/2^shift
*
* fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
* fsec/cyc * 1ns/1000000fsec * 2^shift = mult
* fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
* (fsec/cyc << shift)/1000000 = mult
* (hpet_period << shift)/FSEC_PER_NSEC = mult
*/
tmp = (u64)hpet_period << HPET_SHIFT;
do_div(tmp, FSEC_PER_NSEC);
clocksource_hpet.mult = (u32)tmp;
clocksource_register(&clocksource_hpet);
return hpet_timer_stop_set_go(hpet_tick);
}
@ -444,68 +488,3 @@ static int __init nohpet_setup(char *s)
}
__setup("nohpet", nohpet_setup);
#define HPET_MASK 0xFFFFFFFF
#define HPET_SHIFT 22
/* FSEC = 10^-15 NSEC = 10^-9 */
#define FSEC_PER_NSEC 1000000
static void *hpet_ptr;
static cycle_t read_hpet(void)
{
return (cycle_t)readl(hpet_ptr);
}
static cycle_t __vsyscall_fn vread_hpet(void)
{
return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
}
struct clocksource clocksource_hpet = {
.name = "hpet",
.rating = 250,
.read = read_hpet,
.mask = (cycle_t)HPET_MASK,
.mult = 0, /* set below */
.shift = HPET_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.vread = vread_hpet,
};
static int __init init_hpet_clocksource(void)
{
unsigned long hpet_period;
void __iomem *hpet_base;
u64 tmp;
if (!hpet_address)
return -ENODEV;
/* calculate the hpet address: */
hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
hpet_ptr = hpet_base + HPET_COUNTER;
/* calculate the frequency: */
hpet_period = readl(hpet_base + HPET_PERIOD);
/*
* hpet period is in femto seconds per cycle
* so we need to convert this to ns/cyc units
* aproximated by mult/2^shift
*
* fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
* fsec/cyc * 1ns/1000000fsec * 2^shift = mult
* fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
* (fsec/cyc << shift)/1000000 = mult
* (hpet_period << shift)/FSEC_PER_NSEC = mult
*/
tmp = (u64)hpet_period << HPET_SHIFT;
do_div(tmp, FSEC_PER_NSEC);
clocksource_hpet.mult = (u32)tmp;
return clocksource_register(&clocksource_hpet);
}
module_init(init_hpet_clocksource);

2
arch/x86_64/kernel/time.c
View file

@ -358,6 +358,8 @@ void __init time_init(void)
set_cyc2ns_scale(cpu_khz);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
init_tsc_clocksource();
setup_irq(0, &irq0);
}

7
arch/x86_64/kernel/tsc.c
View file

@ -210,7 +210,7 @@ void mark_tsc_unstable(void)
}
EXPORT_SYMBOL_GPL(mark_tsc_unstable);
static int __init init_tsc_clocksource(void)
void __init init_tsc_clocksource(void)
{
if (!notsc) {
clocksource_tsc.mult = clocksource_khz2mult(cpu_khz,
@ -218,9 +218,6 @@ static int __init init_tsc_clocksource(void)
if (check_tsc_unstable())
clocksource_tsc.rating = 0;
return clocksource_register(&clocksource_tsc);
clocksource_register(&clocksource_tsc);
}
return 0;
}
module_init(init_tsc_clocksource);

5
drivers/clocksource/acpi_pm.c
View file

@ -214,4 +214,7 @@ pm_good:
return clocksource_register(&clocksource_acpi_pm);
}
module_init(init_acpi_pm_clocksource);
/* We use fs_initcall because we want the PCI fixups to have run
* but we still need to load before device_initcall
*/
fs_initcall(init_acpi_pm_clocksource);

2
drivers/clocksource/cyclone.c
View file

@ -116,4 +116,4 @@ static int __init init_cyclone_clocksource(void)
return clocksource_register(&clocksource_cyclone);
}
module_init(init_cyclone_clocksource);
arch_initcall(init_cyclone_clocksource);

1
include/asm-x86_64/tsc.h
View file

@ -55,6 +55,7 @@ static __always_inline cycles_t get_cycles_sync(void)
extern void tsc_init(void);
extern void mark_tsc_unstable(void);
extern int unsynchronized_tsc(void);
extern void init_tsc_clocksource(void);
/*
* Boot-time check whether the TSCs are synchronized across

8
kernel/time/clocksource.c
View file

@ -55,16 +55,18 @@ static DEFINE_SPINLOCK(clocksource_lock);
static char override_name[32];
static int finished_booting;
/* clocksource_done_booting - Called near the end of bootup
/* clocksource_done_booting - Called near the end of core bootup
*
* Hack to avoid lots of clocksource churn at boot time
* Hack to avoid lots of clocksource churn at boot time.
* We use fs_initcall because we want this to start before
* device_initcall but after subsys_initcall.
*/
static int __init clocksource_done_booting(void)
{
finished_booting = 1;
return 0;
}
late_initcall(clocksource_done_booting);
fs_initcall(clocksource_done_booting);
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
static LIST_HEAD(watchdog_list);