mirror of
https://github.com/adulau/aha.git
synced 2024-12-27 03:06:10 +00:00
gigaset: documentation amendments
Various additions and improvements to the Gigaset driver's README file, and added comments to its userspace visible include file. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Tilman Schmidt
David S. Miller
parent
073886ff23
commit
64f16603ea
2 changed files with 106 additions and 32 deletions
|
|
@ -68,22 +68,38 @@ GigaSet 307x Device Driver
|
|||
for troubleshooting or to pass module parameters.
|
||||
|
||||
The module ser_gigaset provides a serial line discipline N_GIGASET_M101
|
||||
which drives the device through the regular serial line driver. It must
|
||||
be attached to the serial line to which the M101 is connected with the
|
||||
ldattach(8) command (requires util-linux-ng release 2.14 or later), for
|
||||
example:
|
||||
ldattach GIGASET_M101 /dev/ttyS1
|
||||
which uses the regular serial port driver to access the device, and must
|
||||
therefore be attached to the serial device to which the M101 is connected.
|
||||
The ldattach(8) command (included in util-linux-ng release 2.14 or later)
|
||||
can be used for that purpose, for example:
|
||||
ldattach GIGASET_M101 /dev/ttyS1
|
||||
This will open the device file, attach the line discipline to it, and
|
||||
then sleep in the background, keeping the device open so that the line
|
||||
discipline remains active. To deactivate it, kill the daemon, for example
|
||||
with
|
||||
killall ldattach
|
||||
killall ldattach
|
||||
before disconnecting the device. To have this happen automatically at
|
||||
system startup/shutdown on an LSB compatible system, create and activate
|
||||
an appropriate LSB startup script /etc/init.d/gigaset. (The init name
|
||||
'gigaset' is officially assigned to this project by LANANA.)
|
||||
Alternatively, just add the 'ldattach' command line to /etc/rc.local.
|
||||
|
||||
The modules accept the following parameters:
|
||||
|
||||
Module Parameter Meaning
|
||||
|
||||
gigaset debug debug level (see section 3.2.)
|
||||
|
||||
startmode initial operation mode (see section 2.5.):
|
||||
bas_gigaset ) 1=ISDN4linux/CAPI (default), 0=Unimodem
|
||||
ser_gigaset )
|
||||
usb_gigaset ) cidmode initial Call-ID mode setting (see section
|
||||
2.5.): 1=on (default), 0=off
|
||||
|
||||
Depending on your distribution you may want to create a separate module
|
||||
configuration file /etc/modprobe.d/gigaset for these, or add them to a
|
||||
custom file like /etc/modprobe.conf.local.
|
||||
|
||||
2.2. Device nodes for user space programs
|
||||
------------------------------------
|
||||
The device can be accessed from user space (eg. by the user space tools
|
||||
|
|
@ -93,11 +109,48 @@ GigaSet 307x Device Driver
|
|||
- /dev/ttyGU0 for M105 (USB data boxes)
|
||||
- /dev/ttyGB0 for the base driver (direct USB connection)
|
||||
|
||||
You can also select a "default device" which is used by the frontends when
|
||||
If you connect more than one device of a type, they will get consecutive
|
||||
device nodes, eg. /dev/ttyGU1 for a second M105.
|
||||
|
||||
You can also set a "default device" for the user space tools to use when
|
||||
no device node is given as parameter, by creating a symlink /dev/ttyG to
|
||||
one of them, eg.:
|
||||
|
||||
ln -s /dev/ttyGB0 /dev/ttyG
|
||||
ln -s /dev/ttyGB0 /dev/ttyG
|
||||
|
||||
The devices accept the following device specific ioctl calls
|
||||
(defined in gigaset_dev.h):
|
||||
|
||||
ioctl(int fd, GIGASET_REDIR, int *cmd);
|
||||
If cmd==1, the device is set to be controlled exclusively through the
|
||||
character device node; access from the ISDN subsystem is blocked.
|
||||
If cmd==0, the device is set to be used from the ISDN subsystem and does
|
||||
not communicate through the character device node.
|
||||
|
||||
ioctl(int fd, GIGASET_CONFIG, int *cmd);
|
||||
(ser_gigaset and usb_gigaset only)
|
||||
If cmd==1, the device is set to adapter configuration mode where commands
|
||||
are interpreted by the M10x DECT adapter itself instead of being
|
||||
forwarded to the base station. In this mode, the device accepts the
|
||||
commands described in Siemens document "AT-Kommando Alignment M10x Data"
|
||||
for setting the operation mode, associating with a base station and
|
||||
querying parameters like field strengh and signal quality.
|
||||
Note that there is no ioctl command for leaving adapter configuration
|
||||
mode and returning to regular operation. In order to leave adapter
|
||||
configuration mode, write the command ATO to the device.
|
||||
|
||||
ioctl(int fd, GIGASET_BRKCHARS, unsigned char brkchars[6]);
|
||||
(usb_gigaset only)
|
||||
Set the break characters on an M105's internal serial adapter to the six
|
||||
bytes stored in brkchars[]. Unused bytes should be set to zero.
|
||||
|
||||
ioctl(int fd, GIGASET_VERSION, unsigned version[4]);
|
||||
Retrieve version information from the driver. version[0] must be set to
|
||||
one of:
|
||||
- GIGVER_DRIVER: retrieve driver version
|
||||
- GIGVER_COMPAT: retrieve interface compatibility version
|
||||
- GIGVER_FWBASE: retrieve the firmware version of the base
|
||||
Upon return, version[] is filled with the requested version information.
|
||||
|
||||
2.3. ISDN4linux
|
||||
----------
|
||||
|
|
@ -113,15 +166,24 @@ GigaSet 307x Device Driver
|
|||
Connection State: 0, Response: -1
|
||||
gigaset_process_response: resp_code -1 in ConState 0 !
|
||||
Timeout occurred
|
||||
you might need to use unimodem mode. (see section 2.5.)
|
||||
you probably need to use unimodem mode. (see section 2.5.)
|
||||
|
||||
2.4. CAPI
|
||||
----
|
||||
If the driver is compiled with CAPI support (kernel configuration option
|
||||
GIGASET_CAPI, experimental) it can also be used with CAPI 2.0 kernel and
|
||||
user space applications. ISDN4Linux is supported in this configuration
|
||||
user space applications. For user space access, the module capi.ko must
|
||||
be loaded. The capiinit command (included in the capi4k-utils package)
|
||||
does this for you.
|
||||
|
||||
The CAPI variant of the driver supports legacy ISDN4Linux applications
|
||||
via the capidrv compatibility driver. The kernel module capidrv.ko must
|
||||
be loaded explicitly ("modprobe capidrv") if needed.
|
||||
be loaded explicitly with the command
|
||||
modprobe capidrv
|
||||
if needed, and cannot be unloaded again without unloading the driver
|
||||
first. (These are limitations of capidrv.)
|
||||
|
||||
The note about unimodem mode in the preceding section applies here, too.
|
||||
|
||||
2.5. Unimodem mode
|
||||
-------------
|
||||
|
|
@ -134,9 +196,14 @@ GigaSet 307x Device Driver
|
|||
You can switch back using
|
||||
gigacontr --mode isdn
|
||||
|
||||
You can also load the driver using e.g.
|
||||
modprobe usb_gigaset startmode=0
|
||||
to prevent the driver from starting in "isdn4linux mode".
|
||||
You can also put the driver directly into Unimodem mode when it's loaded,
|
||||
by passing the module parameter startmode=0 to the hardware specific
|
||||
module, e.g.
|
||||
modprobe usb_gigaset startmode=0
|
||||
or by adding a line like
|
||||
options usb_gigaset startmode=0
|
||||
to an appropriate module configuration file, like /etc/modprobe.d/gigaset
|
||||
or /etc/modprobe.conf.local.
|
||||
|
||||
In this mode the device works like a modem connected to a serial port
|
||||
(the /dev/ttyGU0, ... mentioned above) which understands the commands
|
||||
|
|
@ -164,9 +231,8 @@ GigaSet 307x Device Driver
|
|||
|
||||
options ppp_async flag_time=0
|
||||
|
||||
to /etc/modprobe.conf. If your distribution has some local module
|
||||
configuration file like /etc/modprobe.conf.local,
|
||||
using that should be preferred.
|
||||
to an appropriate module configuration file, like /etc/modprobe.d/gigaset
|
||||
or /etc/modprobe.conf.local.
|
||||
|
||||
2.6. Call-ID (CID) mode
|
||||
------------------
|
||||
|
|
@ -189,12 +255,13 @@ GigaSet 307x Device Driver
|
|||
settings (CID mode).
|
||||
- If you have several DECT data devices (M10x) which you want to use
|
||||
in turn, select Unimodem mode by passing the parameter "cidmode=0" to
|
||||
the driver ("modprobe usb_gigaset cidmode=0" or modprobe.conf).
|
||||
the appropriate driver module (ser_gigaset or usb_gigaset).
|
||||
|
||||
If you want both of these at once, you are out of luck.
|
||||
|
||||
You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
|
||||
setting (ttyGxy is ttyGU0 or ttyGB0).
|
||||
You can also use the tty class parameter "cidmode" of the device to
|
||||
change its CID mode while the driver is loaded, eg.
|
||||
echo 0 > /sys/class/tty/ttyGU0/cidmode
|
||||
|
||||
2.7. Unregistered Wireless Devices (M101/M105)
|
||||
-----------------------------------------
|
||||
|
|
@ -208,7 +275,7 @@ GigaSet 307x Device Driver
|
|||
driver. In that situation, a restricted set of functions is available
|
||||
which includes, in particular, those necessary for registering the device
|
||||
to a base or for switching it between Fixed Part and Portable Part
|
||||
modes.
|
||||
modes. See the gigacontr(8) manpage for details.
|
||||
|
||||
3. Troubleshooting
|
||||
---------------
|
||||
|
|
@ -222,9 +289,7 @@ GigaSet 307x Device Driver
|
|||
|
||||
options isdn dialtimeout=15
|
||||
|
||||
to /etc/modprobe.conf. If your distribution has some local module
|
||||
configuration file like /etc/modprobe.conf.local,
|
||||
using that should be preferred.
|
||||
to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file.
|
||||
|
||||
Problem:
|
||||
Your isdn script aborts with a message about isdnlog.
|
||||
|
|
@ -264,7 +329,8 @@ GigaSet 307x Device Driver
|
|||
The initial value can be set using the debug parameter when loading the
|
||||
module "gigaset", e.g. by adding a line
|
||||
options gigaset debug=0
|
||||
to /etc/modprobe.conf, ...
|
||||
to your module configuration file, eg. /etc/modprobe.d/gigaset or
|
||||
/etc/modprobe.conf.local.
|
||||
|
||||
Generated debugging information can be found
|
||||
- as output of the command
|
||||
|
|
|
|||
|
|
@ -16,15 +16,23 @@
|
|||
|
||||
#include <linux/ioctl.h>
|
||||
|
||||
/* The magic IOCTL value for this interface. */
|
||||
#define GIGASET_IOCTL 0x47
|
||||
|
||||
#define GIGVER_DRIVER 0
|
||||
#define GIGVER_COMPAT 1
|
||||
#define GIGVER_FWBASE 2
|
||||
/* enable/disable device control via character device (lock out ISDN subsys) */
|
||||
#define GIGASET_REDIR _IOWR(GIGASET_IOCTL, 0, int)
|
||||
|
||||
#define GIGASET_REDIR _IOWR (GIGASET_IOCTL, 0, int)
|
||||
#define GIGASET_CONFIG _IOWR (GIGASET_IOCTL, 1, int)
|
||||
#define GIGASET_BRKCHARS _IOW (GIGASET_IOCTL, 2, unsigned char[6]) //FIXME [6] okay?
|
||||
#define GIGASET_VERSION _IOWR (GIGASET_IOCTL, 3, unsigned[4])
|
||||
/* enable adapter configuration mode (M10x only) */
|
||||
#define GIGASET_CONFIG _IOWR(GIGASET_IOCTL, 1, int)
|
||||
|
||||
/* set break characters (M105 only) */
|
||||
#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6])
|
||||
|
||||
/* get version information selected by arg[0] */
|
||||
#define GIGASET_VERSION _IOWR(GIGASET_IOCTL, 3, unsigned[4])
|
||||
/* values for GIGASET_VERSION arg[0] */
|
||||
#define GIGVER_DRIVER 0 /* get driver version */
|
||||
#define GIGVER_COMPAT 1 /* get interface compatibility version */
|
||||
#define GIGVER_FWBASE 2 /* get base station firmware version */
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in a new issue