diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 98120083043..fa6dc4dd3b1 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -4,16 +4,13 @@ mainmenu "Linux/Xtensa Kernel Configuration" config FRAME_POINTER - bool - default n + def_bool n config ZONE_DMA - bool - default y + def_bool y config XTENSA - bool - default y + def_bool y select HAVE_IDE help Xtensa processors are 32-bit RISC machines designed by Tensilica @@ -24,28 +21,25 @@ config XTENSA a home page at . config RWSEM_XCHGADD_ALGORITHM - bool - default y + def_bool y config GENERIC_FIND_NEXT_BIT - bool - default y + def_bool y config GENERIC_HWEIGHT - bool - default y + def_bool y config GENERIC_HARDIRQS - bool - default y + def_bool y + +config GENERIC_GPIO + def_bool y config ARCH_HAS_ILOG2_U32 - bool - default n + def_bool n config ARCH_HAS_ILOG2_U64 - bool - default n + def_bool n config NO_IOPORT def_bool y @@ -54,9 +48,18 @@ config HZ int default 100 +config GENERIC_TIME + def_bool y + source "init/Kconfig" source "kernel/Kconfig.freezer" +config MMU + def_bool n + +config VARIANT_IRQ_SWITCH + def_bool n + menu "Processor type and features" choice @@ -65,38 +68,41 @@ choice config XTENSA_VARIANT_FSF bool "fsf - default (not generic) configuration" + select MMU config XTENSA_VARIANT_DC232B bool "dc232b - Diamond 232L Standard Core Rev.B (LE)" + select MMU help - This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE). -endchoice + This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE). -config MMU - bool - default y +config XTENSA_VARIANT_S6000 + bool "s6000 - Stretch software configurable processor" + select VARIANT_IRQ_SWITCH + select ARCH_REQUIRE_GPIOLIB +endchoice config XTENSA_UNALIGNED_USER bool "Unaligned memory access in use space" - ---help--- - The Xtensa architecture currently does not handle unaligned - memory accesses in hardware but through an exception handler. - Per default, unaligned memory accesses are disabled in user space. + help + The Xtensa architecture currently does not handle unaligned + memory accesses in hardware but through an exception handler. + Per default, unaligned memory accesses are disabled in user space. - Say Y here to enable unaligned memory access in user space. + Say Y here to enable unaligned memory access in user space. config PREEMPT bool "Preemptible Kernel" - ---help--- - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - Unfortunately the kernel code has some race conditions if both - CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is - currently disabled if you are building an SMP kernel. + help + This option reduces the latency of the kernel when reacting to + real-time or interactive events by allowing a low priority process to + be preempted even if it is in kernel mode executing a system call. + Unfortunately the kernel code has some race conditions if both + CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is + currently disabled if you are building an SMP kernel. - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. + Say Y here if you are building a kernel for a desktop, embedded + or real-time system. Say N if you are unsure. config MATH_EMULATION bool "Math emulation" @@ -105,6 +111,32 @@ config MATH_EMULATION endmenu +config XTENSA_CALIBRATE_CCOUNT + def_bool n + help + On some platforms (XT2000, for example), the CPU clock rate can + vary. The frequency can be determined, however, by measuring + against a well known, fixed frequency, such as an UART oscillator. + +config SERIAL_CONSOLE + def_bool n + +config XTENSA_ISS_NETWORK + def_bool n + +menu "Bus options" + +config PCI + bool "PCI support" + default y + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + +source "drivers/pci/Kconfig" + menu "Platform options" choice @@ -113,33 +145,35 @@ choice config XTENSA_PLATFORM_ISS bool "ISS" + select XTENSA_CALIBRATE_CCOUNT + select SERIAL_CONSOLE + select XTENSA_ISS_NETWORK help ISS is an acronym for Tensilica's Instruction Set Simulator. config XTENSA_PLATFORM_XT2000 bool "XT2000" + select XTENSA_CALIBRATE_CCOUNT + select PCI help XT2000 is the name of Tensilica's feature-rich emulation platform. This hardware is capable of running a full Linux distribution. +config XTENSA_PLATFORM_S6105 + bool "S6105" + select SERIAL_CONSOLE + endchoice -config XTENSA_CALIBRATE_CCOUNT - bool "Auto calibration of the CPU clock rate" - ---help--- - On some platforms (XT2000, for example), the CPU clock rate can - vary. The frequency can be determined, however, by measuring - against a well known, fixed frequency, such as an UART oscillator. - config XTENSA_CPU_CLOCK int "CPU clock rate [MHz]" depends on !XTENSA_CALIBRATE_CCOUNT - default "16" + default 16 config GENERIC_CALIBRATE_DELAY bool "Auto calibration of the BogoMIPS value" - ---help--- + help The BogoMIPS value can easily be derived from the CPU frequency. config CMDLINE_BOOL @@ -156,52 +190,27 @@ config CMDLINE time by entering them here. As a minimum, you should specify the memory size and the root device (e.g., mem=64M root=/dev/nfs). -config SERIAL_CONSOLE - bool - depends on XTENSA_PLATFORM_ISS - default y - -config XTENSA_ISS_NETWORK - bool - depends on XTENSA_PLATFORM_ISS - default y - source "mm/Kconfig" endmenu -menu "Bus options" - -config PCI - bool "PCI support" if !XTENSA_PLATFORM_ISS - depends on !XTENSA_PLATFORM_ISS - default y - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - -source "drivers/pci/Kconfig" - config HOTPLUG - bool "Support for hot-pluggable devices" - ---help--- - Say Y here if you want to plug devices into your computer while - the system is running, and be able to use them quickly. In many - cases, the devices can likewise be unplugged at any time too. + help + Say Y here if you want to plug devices into your computer while + the system is running, and be able to use them quickly. In many + cases, the devices can likewise be unplugged at any time too. - One well known example of this is PCMCIA- or PC-cards, credit-card - size devices such as network cards, modems or hard drives which are - plugged into slots found on all modern laptop computers. Another - example, used on modern desktops as well as laptops, is USB. + One well known example of this is PCMCIA- or PC-cards, credit-card + size devices such as network cards, modems or hard drives which are + plugged into slots found on all modern laptop computers. Another + example, used on modern desktops as well as laptops, is USB. - Enable HOTPLUG and build a modular kernel. Get agent software - (from ) and install it. - Then your kernel will automatically call out to a user mode "policy - agent" (/sbin/hotplug) to load modules and set up software needed - to use devices as you hotplug them. + Enable HOTPLUG and build a modular kernel. Get agent software + (from ) and install it. + Then your kernel will automatically call out to a user mode "policy + agent" (/sbin/hotplug) to load modules and set up software needed + to use devices as you hotplug them. source "drivers/pcmcia/Kconfig" @@ -213,9 +222,8 @@ menu "Executable file formats" # only elf supported config KCORE_ELF - bool + def_bool y depends on PROC_FS - default y help If you enabled support for /proc file system then the file /proc/kcore will contain the kernel core image in ELF format. This @@ -240,7 +248,7 @@ source "fs/Kconfig" menu "Xtensa initrd options" depends on BLK_DEV_INITRD - config EMBEDDED_RAMDISK +config EMBEDDED_RAMDISK bool "Embed root filesystem ramdisk into the kernel" config EMBEDDED_RAMDISK_IMAGE diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 1da55fe4bef..4caffac3ca2 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -15,6 +15,7 @@ variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf variant-$(CONFIG_XTENSA_VARIANT_DC232B) := dc232b +variant-$(CONFIG_XTENSA_VARIANT_S6000) := s6000 variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom VARIANT = $(variant-y) @@ -24,6 +25,7 @@ export VARIANT platform-$(CONFIG_XTENSA_PLATFORM_XT2000) := xt2000 platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss +platform-$(CONFIG_XTENSA_PLATFORM_S6105) := s6105 PLATFORM = $(platform-y) export PLATFORM @@ -62,20 +64,23 @@ ifneq ($(VARIANT),) endif endif -# +# Only build variant and/or platform if it includes a Makefile + +buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) +buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) + +# Find libgcc.a LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) head-y := arch/xtensa/kernel/head.o core-y += arch/xtensa/kernel/ arch/xtensa/mm/ -ifneq ($(PLATFORM),) -core-y += arch/xtensa/platforms/$(PLATFORM)/ -endif +core-y += $(buildvar) $(buildplf) + libs-y += arch/xtensa/lib/ $(LIBGCC) boot := arch/xtensa/boot - all: zImage bzImage : zImage diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig new file mode 100644 index 00000000000..6e1deff4159 --- /dev/null +++ b/arch/xtensa/configs/s6105_defconfig @@ -0,0 +1,530 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc7-s6 +# Tue Mar 10 11:09:26 2009 +# +# CONFIG_FRAME_POINTER is not set +CONFIG_ZONE_DMA=y +CONFIG_XTENSA=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_NO_IOPORT=y +CONFIG_HZ=100 +CONFIG_GENERIC_TIME=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_CLASSIC_RCU is not set +# CONFIG_TREE_RCU is not set +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_TRACE is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set +# CONFIG_MMU is not set +CONFIG_VARIANT_IRQ_SWITCH=y + +# +# Processor type and features +# +# CONFIG_XTENSA_VARIANT_FSF is not set +# CONFIG_XTENSA_VARIANT_DC232B is not set +CONFIG_XTENSA_VARIANT_S6000=y +# CONFIG_XTENSA_UNALIGNED_USER is not set +CONFIG_PREEMPT=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_HIGHMEM is not set +# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set +CONFIG_SERIAL_CONSOLE=y +# CONFIG_XTENSA_ISS_NETWORK is not set + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# Platform options +# +# CONFIG_XTENSA_PLATFORM_ISS is not set +# CONFIG_XTENSA_PLATFORM_XT2000 is not set +CONFIG_XTENSA_PLATFORM_S6105=y +CONFIG_XTENSA_CPU_CLOCK=300 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7" +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y + +# +# Executable file formats +# +CONFIG_KCORE_ELF=y +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_NETDEVICES is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Xtensa initrd options +# +# CONFIG_EMBEDDED_RAMDISK is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_NOMMU_REGIONS=y +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 94c4c53a099..8fc1c0c8de0 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -65,13 +65,17 @@ extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); # define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s) #endif -#if (DCACHE_WAY_SIZE > PAGE_SIZE) +#if defined(CONFIG_MMU) && (DCACHE_WAY_SIZE > PAGE_SIZE) extern void __flush_invalidate_dcache_page_alias(unsigned long, unsigned long); +#else +static inline void __flush_invalidate_dcache_page_alias(unsigned long virt, + unsigned long phys) { } #endif -#if (ICACHE_WAY_SIZE > PAGE_SIZE) +#if defined(CONFIG_MMU) && (ICACHE_WAY_SIZE > PAGE_SIZE) extern void __invalidate_icache_page_alias(unsigned long, unsigned long); #else -# define __invalidate_icache_page_alias(v,p) do { } while(0) +static inline void __invalidate_icache_page_alias(unsigned long virt, + unsigned long phys) { } #endif /* diff --git a/arch/xtensa/include/asm/dma.h b/arch/xtensa/include/asm/dma.h index e30f3abf48f..137ca3945b0 100644 --- a/arch/xtensa/include/asm/dma.h +++ b/arch/xtensa/include/asm/dma.h @@ -44,8 +44,9 @@ * the value desired). */ +#ifndef MAX_DMA_ADDRESS #define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KIO_SIZE - 1) - +#endif /* Reserve and release a DMA channel */ extern int request_dma(unsigned int dmanr, const char * device_id); diff --git a/arch/xtensa/include/asm/flat.h b/arch/xtensa/include/asm/flat.h new file mode 100644 index 00000000000..94c44abf15e --- /dev/null +++ b/arch/xtensa/include/asm/flat.h @@ -0,0 +1,12 @@ +#ifndef __ASM_XTENSA_FLAT_H +#define __ASM_XTENSA_FLAT_H + +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval ) put_unaligned(val, rp) +#define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) 0 + +#endif /* __ASM_XTENSA_FLAT_H */ diff --git a/arch/xtensa/include/asm/gpio.h b/arch/xtensa/include/asm/gpio.h new file mode 100644 index 00000000000..0763b076396 --- /dev/null +++ b/arch/xtensa/include/asm/gpio.h @@ -0,0 +1,56 @@ +/* + * Generic GPIO API implementation for xtensa. + * + * Stolen from x86, which is derived from the generic GPIO API for powerpc: + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _ASM_XTENSA_GPIO_H +#define _ASM_XTENSA_GPIO_H + +#include + +#ifdef CONFIG_GPIOLIB + +/* + * Just call gpiolib. + */ +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +/* + * Not implemented, yet. + */ +static inline int gpio_to_irq(unsigned int gpio) +{ + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* _ASM_XTENSA_GPIO_H */ diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index 07b7299dab2..d04cd3a625f 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -69,21 +69,28 @@ static inline void * phys_to_virt(unsigned long address) static inline void *ioremap(unsigned long offset, unsigned long size) { +#ifdef CONFIG_MMU if (offset >= XCHAL_KIO_PADDR && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE) return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR); - else BUG(); +#else + return (void *)offset; +#endif } static inline void *ioremap_nocache(unsigned long offset, unsigned long size) { +#ifdef CONFIG_MMU if (offset >= XCHAL_KIO_PADDR && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE) return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR); else BUG(); +#else + return (void *)offset; +#endif } static inline void iounmap(void *addr) diff --git a/arch/xtensa/include/asm/irq.h b/arch/xtensa/include/asm/irq.h index 1620d1e0e69..dfac82dc52a 100644 --- a/arch/xtensa/include/asm/irq.h +++ b/arch/xtensa/include/asm/irq.h @@ -14,6 +14,13 @@ #include #include +#ifdef CONFIG_VARIANT_IRQ_SWITCH +#include +#else +static inline void variant_irq_enable(unsigned int irq) { } +static inline void variant_irq_disable(unsigned int irq) { } +#endif + #ifndef PLATFORM_NR_IRQS # define PLATFORM_NR_IRQS 0 #endif diff --git a/arch/xtensa/include/asm/mmu.h b/arch/xtensa/include/asm/mmu.h index 44c5bb04c55..04890d6e233 100644 --- a/arch/xtensa/include/asm/mmu.h +++ b/arch/xtensa/include/asm/mmu.h @@ -11,7 +11,12 @@ #ifndef _XTENSA_MMU_H #define _XTENSA_MMU_H +#ifndef CONFIG_MMU +#include +#else + /* Default "unsigned long" context */ typedef unsigned long mm_context_t; +#endif /* CONFIG_MMU */ #endif /* _XTENSA_MMU_H */ diff --git a/arch/xtensa/include/asm/mmu_context.h b/arch/xtensa/include/asm/mmu_context.h index c0fd8e5b451..dbd8731a876 100644 --- a/arch/xtensa/include/asm/mmu_context.h +++ b/arch/xtensa/include/asm/mmu_context.h @@ -13,16 +13,20 @@ #ifndef _XTENSA_MMU_CONTEXT_H #define _XTENSA_MMU_CONTEXT_H +#ifndef CONFIG_MMU +#include +#else + #include #include +#include + #include #include #include #include -#define XCHAL_MMU_ASID_BITS 8 - #if (XCHAL_HAVE_TLBS != 1) # error "Linux must have an MMU!" #endif @@ -133,4 +137,5 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) } +#endif /* CONFIG_MMU */ #endif /* _XTENSA_MMU_CONTEXT_H */ diff --git a/arch/xtensa/include/asm/nommu.h b/arch/xtensa/include/asm/nommu.h new file mode 100644 index 00000000000..dce2c438c5b --- /dev/null +++ b/arch/xtensa/include/asm/nommu.h @@ -0,0 +1,3 @@ +typedef struct { + unsigned long end_brk; +} mm_context_t; diff --git a/arch/xtensa/include/asm/nommu_context.h b/arch/xtensa/include/asm/nommu_context.h new file mode 100644 index 00000000000..599e7a2e729 --- /dev/null +++ b/arch/xtensa/include/asm/nommu_context.h @@ -0,0 +1,25 @@ +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + return 0; +} + +static inline void destroy_context(struct mm_struct *mm) +{ +} + +static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ +} + +static inline void deactivate_mm(struct task_struct *tsk, struct mm_struct *mm) +{ +} diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h index 11f7dc2dbec..17e0c5383b1 100644 --- a/arch/xtensa/include/asm/page.h +++ b/arch/xtensa/include/asm/page.h @@ -14,6 +14,7 @@ #include #include #include +#include /* * Fixed TLB translations in the processor. @@ -32,8 +33,14 @@ #define PAGE_SIZE (__XTENSA_UL_CONST(1) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) +#ifdef CONFIG_MMU #define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR #define MAX_MEM_PFN XCHAL_KSEG_SIZE +#else +#define PAGE_OFFSET 0 +#define MAX_MEM_PFN (PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE) +#endif + #define PGTABLE_START 0x80000000 /* @@ -150,9 +157,11 @@ extern void copy_user_page(void*, void*, unsigned long, struct page*); * addresses. */ +#define ARCH_PFN_OFFSET (PLATFORM_DEFAULT_MEM_START >> PAGE_SHIFT) + #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) #define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) -#define pfn_valid(pfn) ((unsigned long)pfn < max_mapnr) +#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && ((pfn) - ARCH_PFN_OFFSET) < max_mapnr) #ifdef CONFIG_DISCONTIGMEM # error CONFIG_DISCONTIGMEM not supported #endif @@ -162,8 +171,9 @@ extern void copy_user_page(void*, void*, unsigned long, struct page*); #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) +#ifdef CONFIG_MMU #define WANT_PAGE_VIRTUAL - +#endif #endif /* __ASSEMBLY__ */ diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index 8014d96b21f..a138770c358 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -183,7 +183,15 @@ extern unsigned long empty_zero_page[1024]; #define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) +#ifdef CONFIG_MMU extern pgd_t swapper_pg_dir[PAGE_SIZE/sizeof(pgd_t)]; +extern void paging_init(void); +extern void pgtable_cache_init(void); +#else +# define swapper_pg_dir NULL +static inline void paging_init(void) { } +static inline void pgtable_cache_init(void) { } +#endif /* * The pmd contains the kernel virtual address of the pte page. @@ -383,8 +391,6 @@ ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) #else -extern void paging_init(void); - #define kern_addr_valid(addr) (1) extern void update_mmu_cache(struct vm_area_struct * vma, @@ -398,9 +404,6 @@ extern void update_mmu_cache(struct vm_area_struct * vma, #define io_remap_pfn_range(vma,from,pfn,size,prot) \ remap_pfn_range(vma, from, pfn, size, prot) - -extern void pgtable_cache_init(void); - typedef pte_t *pte_addr_t; #endif /* !defined (__ASSEMBLY__) */ diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h index e3d5a48ad49..7d936e58e9b 100644 --- a/arch/xtensa/include/asm/platform.h +++ b/arch/xtensa/include/asm/platform.h @@ -74,16 +74,5 @@ extern int platform_pcibios_fixup (void); */ extern void platform_calibrate_ccount (void); -/* - * platform_get_rtc_time returns RTC seconds (returns 0 for no error) - */ -extern int platform_get_rtc_time(time_t*); - -/* - * platform_set_rtc_time set RTC seconds (returns 0 for no error) - */ -extern int platform_set_rtc_time(time_t); - - #endif /* _XTENSA_PLATFORM_H */ diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h index 07387d3b99f..0ea4937c0b6 100644 --- a/arch/xtensa/include/asm/processor.h +++ b/arch/xtensa/include/asm/processor.h @@ -13,6 +13,7 @@ #include #include +#include #include #include @@ -25,6 +26,8 @@ # error Linux requires the Xtensa Windowed Registers Option. #endif +#define ARCH_SLAB_MINALIGN XCHAL_DATA_WIDTH + /* * User space process size: 1 GB. * Windowed call ABI requires caller and callee to be located within the same @@ -33,7 +36,12 @@ * the 1 GB requirement applies to the stack as well. */ +#ifdef CONFIG_MMU #define TASK_SIZE __XTENSA_UL_CONST(0x40000000) +#else +#define TASK_SIZE (PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE) +#endif + #define STACK_TOP TASK_SIZE #define STACK_TOP_MAX STACK_TOP diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index a51d36a2738..80d24c485fd 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1463,6 +1463,7 @@ ENTRY(_spill_registers) callx0 a0 # should not return 1: j 1b +#ifdef CONFIG_MMU /* * We should never get here. Bail out! */ @@ -1775,7 +1776,7 @@ ENTRY(fast_store_prohibited) bbsi.l a2, PS_UM_BIT, 1f j _kernel_exception 1: j _user_exception - +#endif /* CONFIG_MMU */ /* * System Calls. diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 67e69139520..0817f9db836 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -53,7 +53,7 @@ _start: _j 2f 2: l32r a0, 1b jx a0 - .text + .section .init.text, "ax" .align 4 _startup: @@ -235,8 +235,9 @@ should_never_return: */ .section ".bss.page_aligned", "w" +#ifdef CONFIG_MMU ENTRY(swapper_pg_dir) .fill PAGE_SIZE, 1, 0 +#endif ENTRY(empty_zero_page) .fill PAGE_SIZE, 1, 0 - diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index f3b66fba5b8..a36c85edd04 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -132,6 +132,18 @@ static void xtensa_irq_unmask(unsigned int irq) set_sr (cached_irq_mask, INTENABLE); } +static void xtensa_irq_enable(unsigned int irq) +{ + variant_irq_enable(irq); + xtensa_irq_unmask(irq); +} + +static void xtensa_irq_disable(unsigned int irq) +{ + xtensa_irq_mask(irq); + variant_irq_disable(irq); +} + static void xtensa_irq_ack(unsigned int irq) { set_sr(1 << irq, INTCLEAR); @@ -146,6 +158,8 @@ static int xtensa_irq_retrigger(unsigned int irq) static struct irq_chip xtensa_irq_chip = { .name = "xtensa", + .enable = xtensa_irq_enable, + .disable = xtensa_irq_disable, .mask = xtensa_irq_mask, .unmask = xtensa_irq_unmask, .ack = xtensa_irq_ack, diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c index 69675f21606..1b91a97f1d8 100644 --- a/arch/xtensa/kernel/platform.c +++ b/arch/xtensa/kernel/platform.c @@ -36,8 +36,6 @@ _F(void, power_off, (void), { while(1); }); _F(void, idle, (void), { __asm__ __volatile__ ("waiti 0" ::: "memory"); }); _F(void, heartbeat, (void), { }); _F(int, pcibios_fixup, (void), { return 0; }); -_F(int, get_rtc_time, (time_t* t), { return 0; }); -_F(int, set_rtc_time, (time_t t), { return 0; }); #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT _F(void, calibrate_ccount, (void), diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 4ec1633c294..1e5a034fe01 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -84,7 +84,13 @@ sysmem_info_t __initdata sysmem; int initrd_is_mapped; #endif +#ifdef CONFIG_MMU extern void init_mmu(void); +#else +static inline void init_mmu(void) { } +#endif + +extern void zones_init(void); /* * Boot parameter parsing. @@ -286,6 +292,7 @@ void __init setup_arch(char **cmdline_p) paging_init(); + zones_init(); #ifdef CONFIG_VT # if defined(CONFIG_VGA_CONSOLE) diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 8df1e842f6d..8848120d291 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -14,7 +14,7 @@ #include #include -#include +#include #include #include #include @@ -25,27 +25,31 @@ #include #include - -DEFINE_SPINLOCK(rtc_lock); -EXPORT_SYMBOL(rtc_lock); - - #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT unsigned long ccount_per_jiffy; /* per 1/HZ */ unsigned long nsec_per_ccount; /* nsec per ccount increment */ #endif -static long last_rtc_update = 0; - -/* - * Scheduler clock - returns current tim in nanosec units. - */ - -unsigned long long sched_clock(void) +static cycle_t ccount_read(void) { - return (unsigned long long)jiffies * (1000000000 / HZ); + return (cycle_t)get_ccount(); } +static struct clocksource ccount_clocksource = { + .name = "ccount", + .rating = 200, + .read = ccount_read, + .mask = CLOCKSOURCE_MASK(32), + /* + * With a shift of 22 the lower limit of the cpu clock is + * 1MHz, where NSEC_PER_CCOUNT is 1000 or a bit less than + * 2^10: Since we have 32 bits and the multiplicator can + * already take up as much as 10 bits, this leaves us with + * remaining upper 22 bits. + */ + .shift = 22, +}; + static irqreturn_t timer_interrupt(int irq, void *dev_id); static struct irqaction timer_irqaction = { .handler = timer_interrupt, @@ -55,11 +59,11 @@ static struct irqaction timer_irqaction = { void __init time_init(void) { - time_t sec_o, sec_n = 0; + xtime.tv_nsec = 0; + xtime.tv_sec = read_persistent_clock(); - /* The platform must provide a function to calibrate the processor - * speed for the CALIBRATE. - */ + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT printk("Calibrating CPU frequency "); @@ -67,19 +71,10 @@ void __init time_init(void) printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ), (int)(ccount_per_jiffy/(10000/HZ))%100); #endif - - /* Set time from RTC (if provided) */ - - if (platform_get_rtc_time(&sec_o) == 0) - while (platform_get_rtc_time(&sec_n)) - if (sec_o != sec_n) - break; - - xtime.tv_nsec = 0; - last_rtc_update = xtime.tv_sec = sec_n; - - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); + ccount_clocksource.mult = + clocksource_hz2mult(CCOUNT_PER_JIFFY * HZ, + ccount_clocksource.shift); + clocksource_register(&ccount_clocksource); /* Initialize the linux timer interrupt. */ @@ -87,69 +82,6 @@ void __init time_init(void) set_linux_timer(get_ccount() + CCOUNT_PER_JIFFY); } - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - unsigned long delta; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - - /* This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * made, and then undo it! - */ - - delta = CCOUNT_PER_JIFFY; - delta += get_ccount() - get_linux_timer(); - nsec -= delta * NSEC_PER_CCOUNT; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); - - -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long volatile sec, usec, delta, seq; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - - sec = xtime.tv_sec; - usec = (xtime.tv_nsec / NSEC_PER_USEC); - - delta = get_linux_timer() - get_ccount(); - - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - usec += (((unsigned long) CCOUNT_PER_JIFFY - delta) - * (unsigned long) NSEC_PER_CCOUNT) / NSEC_PER_USEC; - - for (; usec >= 1000000; sec++, usec -= 1000000) - ; - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - /* * The timer interrupt is called HZ times per second. */ @@ -178,16 +110,6 @@ again: next += CCOUNT_PER_JIFFY; set_linux_timer(next); - if (ntp_synced() && - xtime.tv_sec - last_rtc_update >= 659 && - abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ) { - - if (platform_set_rtc_time(xtime.tv_sec+1) == 0) - last_rtc_update = xtime.tv_sec+1; - else - /* Do it again in 60 s */ - last_rtc_update += 60; - } write_sequnlock(&xtime_lock); } @@ -213,4 +135,3 @@ void __cpuinit calibrate_delay(void) (loops_per_jiffy/(10000/HZ)) % 100); } #endif - diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index c44f830b6c7..9f0b71189e9 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -104,6 +104,7 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = { #endif { EXCCAUSE_UNALIGNED, KRNL, fast_unaligned }, #endif +#ifdef CONFIG_MMU { EXCCAUSE_ITLB_MISS, 0, do_page_fault }, { EXCCAUSE_ITLB_MISS, USER|KRNL, fast_second_level_miss}, { EXCCAUSE_ITLB_MULTIHIT, 0, do_multihit }, @@ -118,6 +119,7 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = { { EXCCAUSE_STORE_CACHE_ATTRIBUTE, USER|KRNL, fast_store_prohibited }, { EXCCAUSE_STORE_CACHE_ATTRIBUTE, 0, do_page_fault }, { EXCCAUSE_LOAD_CACHE_ATTRIBUTE, 0, do_page_fault }, +#endif /* CONFIG_MMU */ /* XCCHAL_EXCCAUSE_FLOATING_POINT unhandled */ #if XTENSA_HAVE_COPROCESSOR(0) COPROCESSOR(0), @@ -372,11 +374,10 @@ void show_trace(struct task_struct *task, unsigned long *sp) unsigned long a0, a1, pc; unsigned long sp_start, sp_end; - a1 = (unsigned long)sp; - - if (a1 == 0) - __asm__ __volatile__ ("mov %0, a1\n" : "=a"(a1)); - + if (sp) + a1 = (unsigned long)sp; + else + a1 = task->thread.sp; sp_start = a1 & ~(THREAD_SIZE-1); sp_end = sp_start + THREAD_SIZE; @@ -418,9 +419,8 @@ void show_stack(struct task_struct *task, unsigned long *sp) int i = 0; unsigned long *stack; - if (sp == 0) - __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp)); - + if (!sp) + sp = (unsigned long *)task->thread.sp; stack = sp; printk("\nStack: "); diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index eb2d7bb69ee..74a7518faf1 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -309,6 +309,7 @@ ENTRY(_DoubleExceptionVector) * All other exceptions are unexpected and thus unrecoverable! */ +#ifdef CONFIG_MMU .extern fast_second_level_miss_double_kernel .Lksp: /* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */ @@ -319,6 +320,9 @@ ENTRY(_DoubleExceptionVector) bnez a3, .Lunrecoverable 1: movi a3, fast_second_level_miss_double_kernel jx a3 +#else +.equ .Lksp, .Lunrecoverable +#endif /* Critical! We can't handle this situation. PANIC! */ diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index d506774f4b0..c1be9a4a740 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -17,6 +17,7 @@ #include #include +#include OUTPUT_ARCH(xtensa) ENTRY(_start) @@ -26,7 +27,9 @@ jiffies = jiffies_64 + 4; jiffies = jiffies_64; #endif +#ifndef KERNELOFFSET #define KERNELOFFSET 0xd0001000 +#endif /* Note: In the following macros, it would be nice to specify only the vector name and section kind and construct "sym" and "section" using diff --git a/arch/xtensa/mm/Makefile b/arch/xtensa/mm/Makefile index 64e304a2f88..f0b646d2f84 100644 --- a/arch/xtensa/mm/Makefile +++ b/arch/xtensa/mm/Makefile @@ -2,4 +2,5 @@ # Makefile for the Linux/Xtensa-specific parts of the memory manager. # -obj-y := init.o fault.o tlb.o misc.o cache.o +obj-y := init.o cache.o misc.o +obj-$(CONFIG_MMU) += fault.o mmu.o tlb.o diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index 34163cfaaff..427e14fa43c 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -24,15 +24,8 @@ #include #include -#include #include -#include -#include #include -#include - - -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); /* References to section boundaries */ @@ -130,7 +123,8 @@ void __init bootmem_init(void) /* Find an area to use for the bootmem bitmap. */ - bootmap_size = bootmem_bootmap_pages(max_low_pfn) << PAGE_SHIFT; + bootmap_size = bootmem_bootmap_pages(max_low_pfn - min_low_pfn); + bootmap_size <<= PAGE_SHIFT; bootmap_start = ~0; for (i=0; i> PAGE_SHIFT, + min_low_pfn, max_low_pfn); /* Add all remaining memory pieces into the bootmem map */ @@ -158,14 +153,14 @@ void __init bootmem_init(void) } -void __init paging_init(void) +void __init zones_init(void) { unsigned long zones_size[MAX_NR_ZONES]; int i; /* All pages are DMA-able, so we put them all in the DMA zone. */ - zones_size[ZONE_DMA] = max_low_pfn; + zones_size[ZONE_DMA] = max_low_pfn - ARCH_PFN_OFFSET; for (i = 1; i < MAX_NR_ZONES; i++) zones_size[i] = 0; @@ -173,40 +168,7 @@ void __init paging_init(void) zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn; #endif - /* Initialize the kernel's page tables. */ - - memset(swapper_pg_dir, 0, PAGE_SIZE); - - free_area_init(zones_size); -} - -/* - * Flush the mmu and reset associated register to default values. - */ - -void __init init_mmu (void) -{ - /* Writing zeros to the TLBCFG special registers ensure - * that valid values exist in the register. For existing - * PGSZID fields, zero selects the first element of the - * page-size array. For nonexistent PGSZID fields, zero is - * the best value to write. Also, when changing PGSZID - * fields, the corresponding TLB must be flushed. - */ - set_itlbcfg_register (0); - set_dtlbcfg_register (0); - flush_tlb_all (); - - /* Set rasid register to a known value. */ - - set_rasid_register (ASID_USER_FIRST); - - /* Set PTEVADDR special register to the start of the page - * table, which is in kernel mappable space (ie. not - * statically mapped). This register's value is undefined on - * reset. - */ - set_ptevaddr_register (PGTABLE_START); + free_area_init_node(0, zones_size, ARCH_PFN_OFFSET, NULL); } /* @@ -218,8 +180,8 @@ void __init mem_init(void) unsigned long codesize, reservedpages, datasize, initsize; unsigned long highmemsize, tmp, ram; - max_mapnr = num_physpages = max_low_pfn; - high_memory = (void *) __va(max_mapnr << PAGE_SHIFT); + max_mapnr = num_physpages = max_low_pfn - ARCH_PFN_OFFSET; + high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); highmemsize = 0; #ifdef CONFIG_HIGHMEM @@ -229,7 +191,7 @@ void __init mem_init(void) totalram_pages += free_all_bootmem(); reservedpages = ram = 0; - for (tmp = 0; tmp < max_low_pfn; tmp++) { + for (tmp = 0; tmp < max_mapnr; tmp++) { ram++; if (PageReserved(mem_map+tmp)) reservedpages++; @@ -279,23 +241,3 @@ void free_initmem(void) printk("Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10); } - -struct kmem_cache *pgtable_cache __read_mostly; - -static void pgd_ctor(void* addr) -{ - pte_t* ptep = (pte_t*)addr; - int i; - - for (i = 0; i < 1024; i++, ptep++) - pte_clear(NULL, 0, ptep); - -} - -void __init pgtable_cache_init(void) -{ - pgtable_cache = kmem_cache_create("pgd", - PAGE_SIZE, PAGE_SIZE, - SLAB_HWCACHE_ALIGN, - pgd_ctor); -} diff --git a/arch/xtensa/mm/misc.S b/arch/xtensa/mm/misc.S index c885664211d..b048406d875 100644 --- a/arch/xtensa/mm/misc.S +++ b/arch/xtensa/mm/misc.S @@ -84,6 +84,7 @@ ENTRY(copy_page) retw +#ifdef CONFIG_MMU /* * If we have to deal with cache aliasing, we use temporary memory mappings * to ensure that the source and destination pages have the same color as @@ -311,6 +312,7 @@ ENTRY(__invalidate_icache_page_alias) /* End of special treatment in tlb miss exception */ ENTRY(__tlbtemp_mapping_end) +#endif /* CONFIG_MMU /* * void __invalidate_icache_page(ulong start) diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c new file mode 100644 index 00000000000..4bb91a970f1 --- /dev/null +++ b/arch/xtensa/mm/mmu.c @@ -0,0 +1,70 @@ +/* + * xtensa mmu stuff + * + * Extracted from init.c + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); + +void __init paging_init(void) +{ + memset(swapper_pg_dir, 0, PAGE_SIZE); +} + +/* + * Flush the mmu and reset associated register to default values. + */ +void __init init_mmu(void) +{ + /* Writing zeros to the TLBCFG special registers ensure + * that valid values exist in the register. For existing + * PGSZID fields, zero selects the first element of the + * page-size array. For nonexistent PGSZID fields, zero is + * the best value to write. Also, when changing PGSZID + * fields, the corresponding TLB must be flushed. + */ + set_itlbcfg_register(0); + set_dtlbcfg_register(0); + flush_tlb_all(); + + /* Set rasid register to a known value. */ + + set_rasid_register(ASID_USER_FIRST); + + /* Set PTEVADDR special register to the start of the page + * table, which is in kernel mappable space (ie. not + * statically mapped). This register's value is undefined on + * reset. + */ + set_ptevaddr_register(PGTABLE_START); +} + +struct kmem_cache *pgtable_cache __read_mostly; + +static void pgd_ctor(void *addr) +{ + pte_t *ptep = (pte_t *)addr; + int i; + + for (i = 0; i < 1024; i++, ptep++) + pte_clear(NULL, 0, ptep); + +} + +void __init pgtable_cache_init(void) +{ + pgtable_cache = kmem_cache_create("pgd", + PAGE_SIZE, PAGE_SIZE, + SLAB_HWCACHE_ALIGN, + pgd_ctor); +} diff --git a/arch/xtensa/platforms/s6105/Makefile b/arch/xtensa/platforms/s6105/Makefile new file mode 100644 index 00000000000..0be6194bcb7 --- /dev/null +++ b/arch/xtensa/platforms/s6105/Makefile @@ -0,0 +1,3 @@ +# Makefile for the Stretch S6105 eval board + +obj-y := setup.o device.o diff --git a/arch/xtensa/platforms/s6105/device.c b/arch/xtensa/platforms/s6105/device.c new file mode 100644 index 00000000000..78b08be5a92 --- /dev/null +++ b/arch/xtensa/platforms/s6105/device.c @@ -0,0 +1,67 @@ +/* + * s6105 platform devices + * + * Copyright (c) 2009 emlix GmbH + */ + +#include +#include +#include +#include +#include + +#include + +#define UART_INTNUM 4 + +static const signed char uart_irq_mappings[] = { + S6_INTC_UART(0), + S6_INTC_UART(1), + -1, +}; + +const signed char *platform_irq_mappings[NR_IRQS] = { + [UART_INTNUM] = uart_irq_mappings, +}; + +static struct plat_serial8250_port serial_platform_data[] = { + { + .membase = (void *)S6_REG_UART + 0x0000, + .mapbase = S6_REG_UART + 0x0000, + .irq = UART_INTNUM, + .uartclk = S6_SCLK, + .regshift = 2, + .iotype = SERIAL_IO_MEM, + .flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST, + }, + { + .membase = (void *)S6_REG_UART + 0x1000, + .mapbase = S6_REG_UART + 0x1000, + .irq = UART_INTNUM, + .uartclk = S6_SCLK, + .regshift = 2, + .iotype = SERIAL_IO_MEM, + .flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST, + }, + { }, +}; + +static struct platform_device platform_devices[] = { + { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + }, +}; + +static int __init device_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(platform_devices); i++) + platform_device_register(&platform_devices[i]); + return 0; +} +arch_initcall_sync(device_init); diff --git a/arch/xtensa/platforms/s6105/include/platform/gpio.h b/arch/xtensa/platforms/s6105/include/platform/gpio.h new file mode 100644 index 00000000000..fa11aa4b61e --- /dev/null +++ b/arch/xtensa/platforms/s6105/include/platform/gpio.h @@ -0,0 +1,27 @@ +#ifndef __ASM_XTENSA_S6105_GPIO_H +#define __ASM_XTENSA_S6105_GPIO_H + +#define GPIO_BP_TEMP_ALARM 0 +#define GPIO_PB_RESET_IN 1 +#define GPIO_EXP_IRQ 2 +#define GPIO_TRIGGER_IRQ 3 +#define GPIO_RTC_IRQ 4 +#define GPIO_PHY_IRQ 5 +#define GPIO_IMAGER_RESET 6 +#define GPIO_SD_IRQ 7 +#define GPIO_MINI_BOOT_INH 8 +#define GPIO_BOARD_RESET 9 +#define GPIO_EXP_PRESENT 10 +#define GPIO_LED1_NGREEN 12 +#define GPIO_LED1_RED 13 +#define GPIO_LED0_NGREEN 14 +#define GPIO_LED0_NRED 15 +#define GPIO_SPI_CS0 16 +#define GPIO_SPI_CS1 17 +#define GPIO_SPI_CS3 19 +#define GPIO_SPI_CS4 20 +#define GPIO_SD_WP 21 +#define GPIO_BP_RESET 22 +#define GPIO_ALARM_OUT 23 + +#endif /* __ASM_XTENSA_S6105_GPIO_H */ diff --git a/arch/xtensa/platforms/s6105/include/platform/hardware.h b/arch/xtensa/platforms/s6105/include/platform/hardware.h new file mode 100644 index 00000000000..d628efac708 --- /dev/null +++ b/arch/xtensa/platforms/s6105/include/platform/hardware.h @@ -0,0 +1,11 @@ +#ifndef __XTENSA_S6105_HARDWARE_H +#define __XTENSA_S6105_HARDWARE_H + +#define PLATFORM_DEFAULT_MEM_START 0x40000000 +#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000 + +#define MAX_DMA_ADDRESS 0 + +#define KERNELOFFSET (PLATFORM_DEFAULT_MEM_START + 0x1000) + +#endif /* __XTENSA_S6105_HARDWARE_H */ diff --git a/arch/xtensa/platforms/s6105/include/platform/serial.h b/arch/xtensa/platforms/s6105/include/platform/serial.h new file mode 100644 index 00000000000..c8a771e5981 --- /dev/null +++ b/arch/xtensa/platforms/s6105/include/platform/serial.h @@ -0,0 +1,8 @@ +#ifndef __ASM_XTENSA_S6105_SERIAL_H +#define __ASM_XTENSA_S6105_SERIAL_H + +#include + +#define BASE_BAUD (S6_SCLK / 16) + +#endif /* __ASM_XTENSA_S6105_SERIAL_H */ diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c new file mode 100644 index 00000000000..ae041d5027a --- /dev/null +++ b/arch/xtensa/platforms/s6105/setup.c @@ -0,0 +1,61 @@ +/* + * s6105 control routines + * + * Copyright (c) 2009 emlix GmbH + */ +#include +#include +#include + +#include + +#include +#include + +void platform_halt(void) +{ + local_irq_disable(); + while (1) + ; +} + +void platform_power_off(void) +{ + platform_halt(); +} + +void platform_restart(void) +{ + platform_halt(); +} + +void __init platform_setup(char **cmdline) +{ + unsigned long reg; + + reg = readl(S6_REG_GREG1 + S6_GREG1_CLKGATE); + reg &= ~(1 << S6_GREG1_BLOCK_SB); + writel(reg, S6_REG_GREG1 + S6_GREG1_CLKGATE); + + reg = readl(S6_REG_GREG1 + S6_GREG1_BLOCKENA); + reg |= 1 << S6_GREG1_BLOCK_SB; + writel(reg, S6_REG_GREG1 + S6_GREG1_BLOCKENA); + + printk(KERN_NOTICE "S6105 on Stretch S6000 - " + "Copyright (C) 2009 emlix GmbH \n"); +} + +void __init platform_init(bp_tag_t *first) +{ + gpio_request(GPIO_LED1_NGREEN, "led1_green"); + gpio_request(GPIO_LED1_RED, "led1_red"); + gpio_direction_output(GPIO_LED1_NGREEN, 1); +} + +void platform_heartbeat(void) +{ + static unsigned int c; + + if (!(++c & 0x4F)) + gpio_direction_output(GPIO_LED1_RED, !(c & 0x10)); +} diff --git a/arch/xtensa/platforms/xt2000/include/platform/hardware.h b/arch/xtensa/platforms/xt2000/include/platform/hardware.h index 41459ad0776..886ef156ded 100644 --- a/arch/xtensa/platforms/xt2000/include/platform/hardware.h +++ b/arch/xtensa/platforms/xt2000/include/platform/hardware.h @@ -16,7 +16,6 @@ #define _XTENSA_XT2000_HARDWARE_H #include -#include /* * Memory configuration. diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile new file mode 100644 index 00000000000..03b3975468b --- /dev/null +++ b/arch/xtensa/variants/s6000/Makefile @@ -0,0 +1,3 @@ +# s6000 Makefile + +obj-y += irq.o gpio.o diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c new file mode 100644 index 00000000000..33a8d952934 --- /dev/null +++ b/arch/xtensa/variants/s6000/gpio.c @@ -0,0 +1,71 @@ +/* + * s6000 gpio driver + * + * Copyright (c) 2009 emlix GmbH + * Authors: Oskar Schirmer + * Johannes Weiner + */ +#include +#include +#include +#include +#include + +#include + +#define S6_GPIO_DATA 0x000 +#define S6_GPIO_IS 0x404 +#define S6_GPIO_IBE 0x408 +#define S6_GPIO_IEV 0x40C +#define S6_GPIO_IE 0x410 +#define S6_GPIO_RIS 0x414 +#define S6_GPIO_MIS 0x418 +#define S6_GPIO_IC 0x41C +#define S6_GPIO_AFSEL 0x420 +#define S6_GPIO_DIR 0x800 +#define S6_GPIO_BANK(nr) ((nr) * 0x1000) +#define S6_GPIO_MASK(nr) (4 << (nr)) +#define S6_GPIO_OFFSET(nr) \ + (S6_GPIO_BANK((nr) >> 3) + S6_GPIO_MASK((nr) & 7)) + +static int direction_input(struct gpio_chip *chip, unsigned int off) +{ + writeb(0, S6_REG_GPIO + S6_GPIO_DIR + S6_GPIO_OFFSET(off)); + return 0; +} + +static int get(struct gpio_chip *chip, unsigned int off) +{ + return readb(S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off)); +} + +static int direction_output(struct gpio_chip *chip, unsigned int off, int val) +{ + unsigned rel = S6_GPIO_OFFSET(off); + writeb(~0, S6_REG_GPIO + S6_GPIO_DIR + rel); + writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + rel); + return 0; +} + +static void set(struct gpio_chip *chip, unsigned int off, int val) +{ + writeb(val ? ~0 : 0, S6_REG_GPIO + S6_GPIO_DATA + S6_GPIO_OFFSET(off)); +} + +static struct gpio_chip gpiochip = { + .owner = THIS_MODULE, + .direction_input = direction_input, + .get = get, + .direction_output = direction_output, + .set = set, + .base = 0, + .ngpio = 24, + .can_sleep = 0, /* no blocking io needed */ + .exported = 0, /* no exporting to userspace */ +}; + +static int gpio_init(void) +{ + return gpiochip_add(&gpiochip); +} +device_initcall(gpio_init); diff --git a/arch/xtensa/variants/s6000/include/variant/core.h b/arch/xtensa/variants/s6000/include/variant/core.h new file mode 100644 index 00000000000..af007953027 --- /dev/null +++ b/arch/xtensa/variants/s6000/include/variant/core.h @@ -0,0 +1,431 @@ +/* + * Xtensa processor core configuration information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2008 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 8 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 1 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 0 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 0 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 0 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 0 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 4 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 0 /* processor ID register */ +#define XCHAL_HAVE_THREADPTR 0 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */ +#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 0 /* MAC16 package */ +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ +#define XCHAL_HAVE_FP 1 /* floating point pkg */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 8 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 16 /* data width in bytes */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ + +#define XCHAL_SW_VERSION 701001 /* sw version of this header */ + +#define XCHAL_CORE_ID "stretch_bali" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x000104B9 /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC2F3F9FE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x054104B9 /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX1.0.2" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2100 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 2 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 210002 /* major*100+minor */ +#define XCHAL_HW_REL_LX1 1 +#define XCHAL_HW_REL_LX1_0 1 +#define XCHAL_HW_REL_LX1_0_2 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2100 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 2 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 210002 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2100 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 2 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 210002 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 16 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 16 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 4 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 4 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 32768 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 32768 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 9 +#define XCHAL_DCACHE_SETWIDTH 10 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 4 +#define XCHAL_DCACHE_WAYS 2 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 1 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Number of encoded cache attr bits (see for decoded bits): */ +#define XCHAL_CA_BITS 4 + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 1 /* number of core XLMI ports */ + +/* Data RAM 0: */ +#define XCHAL_DATARAM0_VADDR 0x3FFF0000 +#define XCHAL_DATARAM0_PADDR 0x3FFF0000 +#define XCHAL_DATARAM0_SIZE 65536 +#define XCHAL_DATARAM0_ECC_PARITY 0 + +/* XLMI Port 0: */ +#define XCHAL_XLMI0_VADDR 0x37F80000 +#define XCHAL_XLMI0_PADDR 0x37F80000 +#define XCHAL_XLMI0_SIZE 262144 +#define XCHAL_XLMI0_ECC_PARITY 0 + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 27 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 20 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 1 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x01F07FFF +#define XCHAL_INTLEVEL2_MASK 0x02018000 +#define XCHAL_INTLEVEL3_MASK 0x04060000 +#define XCHAL_INTLEVEL4_MASK 0x00000000 +#define XCHAL_INTLEVEL5_MASK 0x00080000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00000000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x01F07FFF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x03F1FFFF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x07F7FFFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x07F7FFFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x07FFFFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x07FFFFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x07FFFFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 1 +#define XCHAL_INT9_LEVEL 1 +#define XCHAL_INT10_LEVEL 1 +#define XCHAL_INT11_LEVEL 1 +#define XCHAL_INT12_LEVEL 1 +#define XCHAL_INT13_LEVEL 1 +#define XCHAL_INT14_LEVEL 1 +#define XCHAL_INT15_LEVEL 2 +#define XCHAL_INT16_LEVEL 2 +#define XCHAL_INT17_LEVEL 3 +#define XCHAL_INT18_LEVEL 3 +#define XCHAL_INT19_LEVEL 5 +#define XCHAL_INT20_LEVEL 1 +#define XCHAL_INT21_LEVEL 1 +#define XCHAL_INT22_LEVEL 1 +#define XCHAL_INT23_LEVEL 1 +#define XCHAL_INT24_LEVEL 1 +#define XCHAL_INT25_LEVEL 2 +#define XCHAL_INT26_LEVEL 3 +#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 5 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_NMI +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT22_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT23_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT24_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT25_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT26_TYPE XTHAL_INTTYPE_TIMER + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xF8000000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00F00000 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000000 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0007FFFF +#define XCHAL_INTTYPE_MASK_TIMER 0x07000000 +#define XCHAL_INTTYPE_MASK_NMI 0x00080000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 24 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 25 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 26 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 19 /* non-maskable interrupt */ + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +#define XCHAL_INTLEVEL5_NUM 19 +/* (There are many interrupts each at level(s) 1, 2, 3.) */ + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ +#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ +#define XCHAL_EXTINT8_NUM 8 /* (intlevel 1) */ +#define XCHAL_EXTINT9_NUM 9 /* (intlevel 1) */ +#define XCHAL_EXTINT10_NUM 10 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 11 /* (intlevel 1) */ +#define XCHAL_EXTINT12_NUM 12 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 13 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 14 /* (intlevel 1) */ +#define XCHAL_EXTINT15_NUM 15 /* (intlevel 2) */ +#define XCHAL_EXTINT16_NUM 16 /* (intlevel 2) */ +#define XCHAL_EXTINT17_NUM 17 /* (intlevel 3) */ +#define XCHAL_EXTINT18_NUM 18 /* (intlevel 3) */ +#define XCHAL_EXTINT19_NUM 19 /* (intlevel 5) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 0 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 0 /* relocatable vectors */ + +#define XCHAL_RESET_VECOFS 0x00000000 +#define XCHAL_RESET_VECTOR_VADDR 0x3FFE03D0 +#define XCHAL_RESET_VECTOR_PADDR 0x3FFE03D0 +#define XCHAL_USER_VECOFS 0x00000000 +#define XCHAL_USER_VECTOR_VADDR 0x40000220 +#define XCHAL_USER_VECTOR_PADDR 0x40000220 +#define XCHAL_KERNEL_VECOFS 0x00000000 +#define XCHAL_KERNEL_VECTOR_VADDR 0x40000200 +#define XCHAL_KERNEL_VECTOR_PADDR 0x40000200 +#define XCHAL_DOUBLEEXC_VECOFS 0x00000000 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x400002A0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x400002A0 +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0x40000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x40000000 +#define XCHAL_INTLEVEL2_VECOFS 0x00000000 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x40000240 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x40000240 +#define XCHAL_INTLEVEL3_VECOFS 0x00000000 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x40000260 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x40000260 +#define XCHAL_INTLEVEL4_VECOFS 0x00000000 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x40000390 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x40000390 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL4_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x00000000 +#define XCHAL_NMI_VECTOR_VADDR 0x400003B0 +#define XCHAL_NMI_VECTOR_PADDR 0x400003B0 +#define XCHAL_INTLEVEL5_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL5_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL5_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */ +#define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ + +#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/arch/xtensa/variants/s6000/include/variant/hardware.h b/arch/xtensa/variants/s6000/include/variant/hardware.h new file mode 100644 index 00000000000..5d9ba098d84 --- /dev/null +++ b/arch/xtensa/variants/s6000/include/variant/hardware.h @@ -0,0 +1,259 @@ +#ifndef __XTENSA_S6000_HARDWARE_H +#define __XTENSA_S6000_HARDWARE_H + +#define S6_SCLK 1843200 + +#define S6_MEM_REG 0x20000000 +#define S6_MEM_EFI 0x33F00000 +#define S6_MEM_PCIE_DATARAM1 0x34000000 +#define S6_MEM_XLMI 0x37F80000 +#define S6_MEM_PIF_DATARAM1 0x37FFC000 +#define S6_MEM_GMAC 0x38000000 +#define S6_MEM_I2S 0x3A000000 +#define S6_MEM_EGIB 0x3C000000 +#define S6_MEM_PCIE_CFG 0x3E000000 +#define S6_MEM_PIF_DATARAM 0x3FFE0000 +#define S6_MEM_XLMI_DATARAM 0x3FFF0000 +#define S6_MEM_DDR 0x40000000 +#define S6_MEM_PCIE_APER 0xC0000000 +#define S6_MEM_AUX 0xF0000000 + +/* Device addresses */ + +#define S6_REG_SCB S6_MEM_REG +#define S6_REG_NB (S6_REG_SCB + 0x10000) +#define S6_REG_LMSDMA (S6_REG_SCB + 0x20000) +#define S6_REG_NI (S6_REG_SCB + 0x30000) +#define S6_REG_NIDMA (S6_REG_SCB + 0x40000) +#define S6_REG_NS (S6_REG_SCB + 0x50000) +#define S6_REG_DDR (S6_REG_SCB + 0x60000) +#define S6_REG_GREG1 (S6_REG_SCB + 0x70000) +#define S6_REG_DP (S6_REG_SCB + 0x80000) +#define S6_REG_DPDMA (S6_REG_SCB + 0x90000) +#define S6_REG_EGIB (S6_REG_SCB + 0xA0000) +#define S6_REG_PCIE (S6_REG_SCB + 0xB0000) +#define S6_REG_I2S (S6_REG_SCB + 0xC0000) +#define S6_REG_GMAC (S6_REG_SCB + 0xD0000) +#define S6_REG_HIFDMA (S6_REG_SCB + 0xE0000) +#define S6_REG_GREG2 (S6_REG_SCB + 0xF0000) + +#define S6_REG_APB S6_REG_SCB +#define S6_REG_UART (S6_REG_APB + 0x0000) +#define S6_REG_INTC (S6_REG_APB + 0x2000) +#define S6_REG_SPI (S6_REG_APB + 0x3000) +#define S6_REG_I2C (S6_REG_APB + 0x4000) +#define S6_REG_GPIO (S6_REG_APB + 0x8000) + +/* Global register block */ + +#define S6_GREG1_PLL_LOCKCLEAR 0x000 +#define S6_GREG1_PLL_LOCK_SYS 0 +#define S6_GREG1_PLL_LOCK_IO 1 +#define S6_GREG1_PLL_LOCK_AIM 2 +#define S6_GREG1_PLL_LOCK_DP0 3 +#define S6_GREG1_PLL_LOCK_DP2 4 +#define S6_GREG1_PLL_LOCK_DDR 5 +#define S6_GREG1_PLL_LOCKSTAT 0x004 +#define S6_GREG1_PLL_LOCKSTAT_CURLOCK 0 +#define S6_GREG1_PLL_LOCKSTAT_EVERUNLCK 8 +#define S6_GREG1_PLLSEL 0x010 +#define S6_GREG1_PLLSEL_AIM 0 +#define S6_GREG1_PLLSEL_AIM_DDR2 0 +#define S6_GREG1_PLLSEL_AIM_300MHZ 1 +#define S6_GREG1_PLLSEL_AIM_240MHZ 2 +#define S6_GREG1_PLLSEL_AIM_200MHZ 3 +#define S6_GREG1_PLLSEL_AIM_150MHZ 4 +#define S6_GREG1_PLLSEL_AIM_120MHZ 5 +#define S6_GREG1_PLLSEL_AIM_40MHZ 6 +#define S6_GREG1_PLLSEL_AIM_PLLAIMREF 7 +#define S6_GREG1_PLLSEL_AIM_MASK 7 +#define S6_GREG1_PLLSEL_DDR 8 +#define S6_GREG1_PLLSEL_DDR_HS 0 +#define S6_GREG1_PLLSEL_DDR_333MHZ 1 +#define S6_GREG1_PLLSEL_DDR_250MHZ 2 +#define S6_GREG1_PLLSEL_DDR_200MHZ 3 +#define S6_GREG1_PLLSEL_DDR_167MHZ 4 +#define S6_GREG1_PLLSEL_DDR_100MHZ 5 +#define S6_GREG1_PLLSEL_DDR_33MHZ 6 +#define S6_GREG1_PLLSEL_DDR_PLLIOREF 7 +#define S6_GREG1_PLLSEL_DDR_MASK 7 +#define S6_GREG1_PLLSEL_GMAC 16 +#define S6_GREG1_PLLSEL_GMAC_125MHZ 0 +#define S6_GREG1_PLLSEL_GMAC_25MHZ 1 +#define S6_GREG1_PLLSEL_GMAC_2500KHZ 2 +#define S6_GREG1_PLLSEL_GMAC_EXTERN 3 +#define S6_GREG1_PLLSEL_GMAC_MASK 3 +#define S6_GREG1_PLLSEL_GMII 18 +#define S6_GREG1_PLLSEL_GMII_111MHZ 0 +#define S6_GREG1_PLLSEL_GMII_IOREF 1 +#define S6_GREG1_PLLSEL_GMII_NONE 2 +#define S6_GREG1_PLLSEL_GMII_125MHZ 3 +#define S6_GREG1_PLLSEL_GMII_MASK 3 +#define S6_GREG1_SYSUNLOCKCNT 0x020 +#define S6_GREG1_IOUNLOCKCNT 0x024 +#define S6_GREG1_AIMUNLOCKCNT 0x028 +#define S6_GREG1_DP0UNLOCKCNT 0x02C +#define S6_GREG1_DP2UNLOCKCNT 0x030 +#define S6_GREG1_DDRUNLOCKCNT 0x034 +#define S6_GREG1_CLKBAL0 0x040 +#define S6_GREG1_CLKBAL0_LSGB 0 +#define S6_GREG1_CLKBAL0_LSPX 8 +#define S6_GREG1_CLKBAL0_MEMDO 16 +#define S6_GREG1_CLKBAL0_HSXT1 24 +#define S6_GREG1_CLKBAL1 0x044 +#define S6_GREG1_CLKBAL1_HSISEF 0 +#define S6_GREG1_CLKBAL1_HSNI 8 +#define S6_GREG1_CLKBAL1_HSNS 16 +#define S6_GREG1_CLKBAL1_HSISEFCFG 24 +#define S6_GREG1_CLKBAL2 0x048 +#define S6_GREG1_CLKBAL2_LSNB 0 +#define S6_GREG1_CLKBAL2_LSSB 8 +#define S6_GREG1_CLKBAL2_LSREST 24 +#define S6_GREG1_CLKBAL3 0x04C +#define S6_GREG1_CLKBAL3_ISEFXAD 0 +#define S6_GREG1_CLKBAL3_ISEFLMS 8 +#define S6_GREG1_CLKBAL3_ISEFISEF 16 +#define S6_GREG1_CLKBAL3_DDRDD 24 +#define S6_GREG1_CLKBAL4 0x050 +#define S6_GREG1_CLKBAL4_DDRDP 0 +#define S6_GREG1_CLKBAL4_DDRDO 8 +#define S6_GREG1_CLKBAL4_DDRNB 16 +#define S6_GREG1_CLKBAL4_DDRLMS 24 +#define S6_GREG1_BLOCKENA 0x100 +#define S6_GREG1_BLOCK_DDR 0 +#define S6_GREG1_BLOCK_DP 1 +#define S6_GREG1_BLOCK_NSNI 2 +#define S6_GREG1_BLOCK_PCIE 3 +#define S6_GREG1_BLOCK_GMAC 4 +#define S6_GREG1_BLOCK_I2S 5 +#define S6_GREG1_BLOCK_EGIB 6 +#define S6_GREG1_BLOCK_SB 7 +#define S6_GREG1_BLOCK_XT1 8 +#define S6_GREG1_CLKGATE 0x104 +#define S6_GREG1_BGATE_AIMNORTH 9 +#define S6_GREG1_BGATE_AIMEAST 10 +#define S6_GREG1_BGATE_AIMWEST 11 +#define S6_GREG1_BGATE_AIMSOUTH 12 +#define S6_GREG1_CHIPRES 0x108 +#define S6_GREG1_CHIPRES_SOFTRES 0 +#define S6_GREG1_CHIPRES_LOSTLOCK 1 +#define S6_GREG1_RESETCAUSE 0x10C +#define S6_GREG1_RESETCAUSE_RESETN 0 +#define S6_GREG1_RESETCAUSE_GLOBAL 1 +#define S6_GREG1_RESETCAUSE_WDOGTIMER 2 +#define S6_GREG1_RESETCAUSE_SWCHIP 3 +#define S6_GREG1_RESETCAUSE_PLLSYSLOSS 4 +#define S6_GREG1_RESETCAUSE_PCIE 5 +#define S6_GREG1_RESETCAUSE_CREATEDGLOB 6 +#define S6_GREG1_REFCLOCKCNT 0x110 +#define S6_GREG1_RESETTIMER 0x114 +#define S6_GREG1_NMITIMER 0x118 +#define S6_GREG1_GLOBAL_TIMER 0x11C +#define S6_GREG1_TIMER0 0x180 +#define S6_GREG1_TIMER1 0x184 +#define S6_GREG1_UARTCLOCKSEL 0x204 +#define S6_GREG1_CHIPVERSPACKG 0x208 +#define S6_GREG1_CHIPVERSPACKG_CHIPVID 0 +#define S6_GREG1_CHIPVERSPACKG_PACKSEL 8 +#define S6_GREG1_ONDIETERMCTRL 0x20C +#define S6_GREG1_ONDIETERMCTRL_WEST 0 +#define S6_GREG1_ONDIETERMCTRL_NORTH 2 +#define S6_GREG1_ONDIETERMCTRL_EAST 4 +#define S6_GREG1_ONDIETERMCTRL_SOUTH 6 +#define S6_GREG1_ONDIETERMCTRL_NONE 0 +#define S6_GREG1_ONDIETERMCTRL_75OHM 2 +#define S6_GREG1_ONDIETERMCTRL_MASK 3 +#define S6_GREG1_BOOT_CFG0 0x210 +#define S6_GREG1_BOOT_CFG0_AIMSTRONG 1 +#define S6_GREG1_BOOT_CFG0_MINIBOOTDL 2 +#define S6_GREG1_BOOT_CFG0_OCDGPIO8SET 5 +#define S6_GREG1_BOOT_CFG0_OCDGPIOENA 6 +#define S6_GREG1_BOOT_CFG0_DOWNSTREAM 7 +#define S6_GREG1_BOOT_CFG0_PLLSYSDIV 8 +#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_300MHZ 1 +#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_240MHZ 2 +#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_200MHZ 3 +#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_150MHZ 4 +#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_120MHZ 5 +#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_40MHZ 6 +#define S6_GREG1_BOOT_CFG0_PLLSYSDIV_MASK 7 +#define S6_GREG1_BOOT_CFG0_BALHSLMS 12 +#define S6_GREG1_BOOT_CFG0_BALHSNB 18 +#define S6_GREG1_BOOT_CFG0_BALHSXAD 24 +#define S6_GREG1_BOOT_CFG1 0x214 +#define S6_GREG1_BOOT_CFG1_PCIE1LANE 1 +#define S6_GREG1_BOOT_CFG1_MPLLPRESCALE 2 +#define S6_GREG1_BOOT_CFG1_MPLLNCY 4 +#define S6_GREG1_BOOT_CFG1_MPLLNCY5 9 +#define S6_GREG1_BOOT_CFG1_BALHSREST 14 +#define S6_GREG1_BOOT_CFG1_BALHSPSMEMS 20 +#define S6_GREG1_BOOT_CFG1_BALLSGI 26 +#define S6_GREG1_BOOT_CFG2 0x218 +#define S6_GREG1_BOOT_CFG2_PEID 0 +#define S6_GREG1_BOOT_CFG3 0x21C +#define S6_GREG1_DRAMBUSYHOLDOF 0x220 +#define S6_GREG1_DRAMBUSYHOLDOF_XT0 0 +#define S6_GREG1_DRAMBUSYHOLDOF_XT1 4 +#define S6_GREG1_DRAMBUSYHOLDOF_XT_MASK 7 +#define S6_GREG1_PCIEBAR1SIZE 0x224 +#define S6_GREG1_PCIEBAR2SIZE 0x228 +#define S6_GREG1_PCIEVENDOR 0x22C +#define S6_GREG1_PCIEDEVICE 0x230 +#define S6_GREG1_PCIEREV 0x234 +#define S6_GREG1_PCIECLASS 0x238 +#define S6_GREG1_XT1DCACHEMISS 0x240 +#define S6_GREG1_XT1ICACHEMISS 0x244 +#define S6_GREG1_HWSEMAPHORE(n) (0x400 + 4 * (n)) +#define S6_GREG1_HWSEMAPHORE_NB 16 + +/* peripheral interrupt numbers */ + +#define S6_INTC_GPIO(n) (n) /* 0..3 */ +#define S6_INTC_I2C 4 +#define S6_INTC_SPI 5 +#define S6_INTC_NB_ERR 6 +#define S6_INTC_DMA_LMSERR 7 +#define S6_INTC_DMA_LMSLOWWMRK(n) (8 + (n)) /* 0..11 */ +#define S6_INTC_DMA_LMSPENDCNT(n) (20 + (n)) /* 0..11 */ +#define S6_INTC_DMA HOSTLOWWMRK(n) (32 + (n)) /* 0..6 */ +#define S6_INTC_DMA_HOSTPENDCNT(n) (39 + (n)) /* 0..6 */ +#define S6_INTC_DMA_HOSTERR 46 +#define S6_INTC_UART(n) (47 + (n)) /* 0..1 */ +#define S6_INTC_XAD 49 +#define S6_INTC_NI_ERR 50 +#define S6_INTC_NI_INFIFOFULL 51 +#define S6_INTC_DMA_NIERR 52 +#define S6_INTC_DMA_NILOWWMRK(n) (53 + (n)) /* 0..3 */ +#define S6_INTC_DMA_NIPENDCNT(n) (57 + (n)) /* 0..3 */ +#define S6_INTC_DDR 61 +#define S6_INTC_NS_ERR 62 +#define S6_INTC_EFI_CFGERR 63 +#define S6_INTC_EFI_ISEFTEST 64 +#define S6_INTC_EFI_WRITEERR 65 +#define S6_INTC_NMI_TIMER 66 +#define S6_INTC_PLLLOCK_SYS 67 +#define S6_INTC_PLLLOCK_IO 68 +#define S6_INTC_PLLLOCK_AIM 69 +#define S6_INTC_PLLLOCK_DP0 70 +#define S6_INTC_PLLLOCK_DP2 71 +#define S6_INTC_I2S_ERR 72 +#define S6_INTC_GMAC_STAT 73 +#define S6_INTC_GMAC_ERR 74 +#define S6_INTC_GIB_ERR 75 +#define S6_INTC_PCIE_ERR 76 +#define S6_INTC_PCIE_MSI(n) (77 + (n)) /* 0..3 */ +#define S6_INTC_PCIE_INTA 81 +#define S6_INTC_PCIE_INTB 82 +#define S6_INTC_PCIE_INTC 83 +#define S6_INTC_PCIE_INTD 84 +#define S6_INTC_SW(n) (85 + (n)) /* 0..9 */ +#define S6_INTC_SW_ENABLE(n) (85 + 256 + (n)) +#define S6_INTC_DMA_DP_ERR 95 +#define S6_INTC_DMA_DPLOWWMRK(n) (96 + (n)) /* 0..3 */ +#define S6_INTC_DMA_DPPENDCNT(n) (100 + (n)) /* 0..3 */ +#define S6_INTC_DMA_DPTERMCNT(n) (104 + (n)) /* 0..3 */ +#define S6_INTC_TIMER0 108 +#define S6_INTC_TIMER1 109 +#define S6_INTC_DMA_HOSTTERMCNT(n) (110 + (n)) /* 0..6 */ + +#endif /* __XTENSA_S6000_HARDWARE_H */ diff --git a/arch/xtensa/variants/s6000/include/variant/irq.h b/arch/xtensa/variants/s6000/include/variant/irq.h new file mode 100644 index 00000000000..fa031cb0acc --- /dev/null +++ b/arch/xtensa/variants/s6000/include/variant/irq.h @@ -0,0 +1,9 @@ +#ifndef __XTENSA_S6000_IRQ_H +#define __XTENSA_S6000_IRQ_H + +#define NO_IRQ (-1) + +extern void variant_irq_enable(unsigned int irq); +extern void variant_irq_disable(unsigned int irq); + +#endif /* __XTENSA_S6000_IRQ_H */ diff --git a/arch/xtensa/variants/s6000/include/variant/tie-asm.h b/arch/xtensa/variants/s6000/include/variant/tie-asm.h new file mode 100644 index 00000000000..f02d0a3a2e2 --- /dev/null +++ b/arch/xtensa/variants/s6000/include/variant/tie-asm.h @@ -0,0 +1,304 @@ +/* + * This header file contains assembly-language definitions (assembly + * macros, etc.) for this specific Xtensa processor's TIE extensions + * and options. It is customized to this Xtensa processor configuration. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2008 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ + + + +/* Macro to save all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Save area ptr (clobbered): ptr (16 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + rsr \at1, BR // boolean option + s32i \at1, \ptr, .Lxchal_ofs_ + 0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .endm // xchal_ncp_store + +/* Macro to save all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Save area ptr (clobbered): ptr (16 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_ + 0 + wsr \at1, BR // boolean option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .endm // xchal_ncp_load + + + +#define XCHAL_NCP_NUM_ATMPS 1 + + + +/* Macro to save the state of TIE coprocessor FPU. + * Save area ptr (clobbered): ptr (16 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_CP0_NUM_ATMPS needed) + */ +#define xchal_cp_FPU_store xchal_cp0_store +/* #define xchal_cp_FPU_store_a2 xchal_cp0_store a2 a3 a4 a5 a6 */ + .macro xchal_cp0_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 0, 1, 16 + rur232 \at1 // FCR + s32i \at1, \ptr, 0 + rur233 \at1 // FSR + s32i \at1, \ptr, 4 + SSI f0, \ptr, 8 + SSI f1, \ptr, 12 + SSI f2, \ptr, 16 + SSI f3, \ptr, 20 + SSI f4, \ptr, 24 + SSI f5, \ptr, 28 + SSI f6, \ptr, 32 + SSI f7, \ptr, 36 + SSI f8, \ptr, 40 + SSI f9, \ptr, 44 + SSI f10, \ptr, 48 + SSI f11, \ptr, 52 + SSI f12, \ptr, 56 + SSI f13, \ptr, 60 + SSI f14, \ptr, 64 + SSI f15, \ptr, 68 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 72 + .endif + .endm // xchal_cp0_store + +/* Macro to restore the state of TIE coprocessor FPU. + * Save area ptr (clobbered): ptr (16 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_CP0_NUM_ATMPS needed) + */ +#define xchal_cp_FPU_load xchal_cp0_load +/* #define xchal_cp_FPU_load_a2 xchal_cp0_load a2 a3 a4 a5 a6 */ + .macro xchal_cp0_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 0, 1, 16 + l32i \at1, \ptr, 0 + wur232 \at1 // FCR + l32i \at1, \ptr, 4 + wur233 \at1 // FSR + LSI f0, \ptr, 8 + LSI f1, \ptr, 12 + LSI f2, \ptr, 16 + LSI f3, \ptr, 20 + LSI f4, \ptr, 24 + LSI f5, \ptr, 28 + LSI f6, \ptr, 32 + LSI f7, \ptr, 36 + LSI f8, \ptr, 40 + LSI f9, \ptr, 44 + LSI f10, \ptr, 48 + LSI f11, \ptr, 52 + LSI f12, \ptr, 56 + LSI f13, \ptr, 60 + LSI f14, \ptr, 64 + LSI f15, \ptr, 68 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 72 + .endif + .endm // xchal_cp0_load + +#define XCHAL_CP0_NUM_ATMPS 1 + +/* Macro to save the state of TIE coprocessor XAD. + * Save area ptr (clobbered): ptr (16 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_CP6_NUM_ATMPS needed) + */ +#define xchal_cp_XAD_store xchal_cp6_store +/* #define xchal_cp_XAD_store_a2 xchal_cp6_store a2 a3 a4 a5 a6 */ + .macro xchal_cp6_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 0, 1, 16 + rur0 \at1 // LDCBHI + s32i \at1, \ptr, 0 + rur1 \at1 // LDCBLO + s32i \at1, \ptr, 4 + rur2 \at1 // STCBHI + s32i \at1, \ptr, 8 + rur3 \at1 // STCBLO + s32i \at1, \ptr, 12 + rur8 \at1 // LDBRBASE + s32i \at1, \ptr, 16 + rur9 \at1 // LDBROFF + s32i \at1, \ptr, 20 + rur10 \at1 // LDBRINC + s32i \at1, \ptr, 24 + rur11 \at1 // STBRBASE + s32i \at1, \ptr, 28 + rur12 \at1 // STBROFF + s32i \at1, \ptr, 32 + rur13 \at1 // STBRINC + s32i \at1, \ptr, 36 + rur24 \at1 // SCRATCH0 + s32i \at1, \ptr, 40 + rur25 \at1 // SCRATCH1 + s32i \at1, \ptr, 44 + rur26 \at1 // SCRATCH2 + s32i \at1, \ptr, 48 + rur27 \at1 // SCRATCH3 + s32i \at1, \ptr, 52 + WRAS128I wra0, \ptr, 64 + WRAS128I wra1, \ptr, 80 + WRAS128I wra2, \ptr, 96 + WRAS128I wra3, \ptr, 112 + WRAS128I wra4, \ptr, 128 + WRAS128I wra5, \ptr, 144 + WRAS128I wra6, \ptr, 160 + WRAS128I wra7, \ptr, 176 + WRAS128I wra8, \ptr, 192 + WRAS128I wra9, \ptr, 208 + WRAS128I wra10, \ptr, 224 + WRAS128I wra11, \ptr, 240 + WRAS128I wra12, \ptr, 256 + WRAS128I wra13, \ptr, 272 + WRAS128I wra14, \ptr, 288 + WRAS128I wra15, \ptr, 304 + WRBS128I wrb0, \ptr, 320 + WRBS128I wrb1, \ptr, 336 + WRBS128I wrb2, \ptr, 352 + WRBS128I wrb3, \ptr, 368 + WRBS128I wrb4, \ptr, 384 + WRBS128I wrb5, \ptr, 400 + WRBS128I wrb6, \ptr, 416 + WRBS128I wrb7, \ptr, 432 + WRBS128I wrb8, \ptr, 448 + WRBS128I wrb9, \ptr, 464 + WRBS128I wrb10, \ptr, 480 + WRBS128I wrb11, \ptr, 496 + WRBS128I wrb12, \ptr, 512 + WRBS128I wrb13, \ptr, 528 + WRBS128I wrb14, \ptr, 544 + WRBS128I wrb15, \ptr, 560 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 576 + .endif + .endm // xchal_cp6_store + +/* Macro to restore the state of TIE coprocessor XAD. + * Save area ptr (clobbered): ptr (16 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_CP6_NUM_ATMPS needed) + */ +#define xchal_cp_XAD_load xchal_cp6_load +/* #define xchal_cp_XAD_load_a2 xchal_cp6_load a2 a3 a4 a5 a6 */ + .macro xchal_cp6_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 0, 1, 16 + l32i \at1, \ptr, 0 + wur0 \at1 // LDCBHI + l32i \at1, \ptr, 4 + wur1 \at1 // LDCBLO + l32i \at1, \ptr, 8 + wur2 \at1 // STCBHI + l32i \at1, \ptr, 12 + wur3 \at1 // STCBLO + l32i \at1, \ptr, 16 + wur8 \at1 // LDBRBASE + l32i \at1, \ptr, 20 + wur9 \at1 // LDBROFF + l32i \at1, \ptr, 24 + wur10 \at1 // LDBRINC + l32i \at1, \ptr, 28 + wur11 \at1 // STBRBASE + l32i \at1, \ptr, 32 + wur12 \at1 // STBROFF + l32i \at1, \ptr, 36 + wur13 \at1 // STBRINC + l32i \at1, \ptr, 40 + wur24 \at1 // SCRATCH0 + l32i \at1, \ptr, 44 + wur25 \at1 // SCRATCH1 + l32i \at1, \ptr, 48 + wur26 \at1 // SCRATCH2 + l32i \at1, \ptr, 52 + wur27 \at1 // SCRATCH3 + WRBL128I wrb0, \ptr, 320 + WRBL128I wrb1, \ptr, 336 + WRBL128I wrb2, \ptr, 352 + WRBL128I wrb3, \ptr, 368 + WRBL128I wrb4, \ptr, 384 + WRBL128I wrb5, \ptr, 400 + WRBL128I wrb6, \ptr, 416 + WRBL128I wrb7, \ptr, 432 + WRBL128I wrb8, \ptr, 448 + WRBL128I wrb9, \ptr, 464 + WRBL128I wrb10, \ptr, 480 + WRBL128I wrb11, \ptr, 496 + WRBL128I wrb12, \ptr, 512 + WRBL128I wrb13, \ptr, 528 + WRBL128I wrb14, \ptr, 544 + WRBL128I wrb15, \ptr, 560 + WRAL128I wra0, \ptr, 64 + WRAL128I wra1, \ptr, 80 + WRAL128I wra2, \ptr, 96 + WRAL128I wra3, \ptr, 112 + WRAL128I wra4, \ptr, 128 + WRAL128I wra5, \ptr, 144 + WRAL128I wra6, \ptr, 160 + WRAL128I wra7, \ptr, 176 + WRAL128I wra8, \ptr, 192 + WRAL128I wra9, \ptr, 208 + WRAL128I wra10, \ptr, 224 + WRAL128I wra11, \ptr, 240 + WRAL128I wra12, \ptr, 256 + WRAL128I wra13, \ptr, 272 + WRAL128I wra14, \ptr, 288 + WRAL128I wra15, \ptr, 304 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 576 + .endif + .endm // xchal_cp6_load + +#define XCHAL_CP6_NUM_ATMPS 1 +#define XCHAL_SA_NUM_ATMPS 1 + + /* Empty macros for unconfigured coprocessors: */ + .macro xchal_cp1_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp1_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp2_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp2_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp3_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp3_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp4_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp4_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp5_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp5_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp7_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ + diff --git a/arch/xtensa/variants/s6000/include/variant/tie.h b/arch/xtensa/variants/s6000/include/variant/tie.h new file mode 100644 index 00000000000..be7ea843d5d --- /dev/null +++ b/arch/xtensa/variants/s6000/include/variant/tie.h @@ -0,0 +1,191 @@ +/* + * This header file describes this specific Xtensa processor's TIE extensions + * that extend basic Xtensa core functionality. It is customized to this + * Xtensa processor configuration. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2008 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 2 /* number of coprocessors */ +#define XCHAL_CP_MAX 7 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x41 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ + +/* Basic parameters of each coprocessor: */ +#define XCHAL_CP0_NAME "FPU" +#define XCHAL_CP0_IDENT FPU +#define XCHAL_CP0_SA_SIZE 72 /* size of state save area */ +#define XCHAL_CP0_SA_ALIGN 4 /* min alignment of save area */ +#define XCHAL_CP_ID_FPU 0 /* coprocessor ID (0..7) */ +#define XCHAL_CP6_NAME "XAD" +#define XCHAL_CP6_IDENT XAD +#define XCHAL_CP6_SA_SIZE 576 /* size of state save area */ +#define XCHAL_CP6_SA_ALIGN 16 /* min alignment of save area */ +#define XCHAL_CP_ID_XAD 6 /* coprocessor ID (0..7) */ + +/* Filler info for unassigned coprocessors, to simplify arrays etc: */ +#define XCHAL_CP1_SA_SIZE 0 +#define XCHAL_CP1_SA_ALIGN 1 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP7_SA_SIZE 0 +#define XCHAL_CP7_SA_ALIGN 1 + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 4 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 672 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 16 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see ) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 1 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0) + +#define XCHAL_CP0_SA_NUM 18 +#define XCHAL_CP0_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,1,0, fcr, 4, 4, 4,0x03E8, ur,232, 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, fsr, 4, 4, 4,0x03E9, ur,233, 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f0, 4, 4, 4,0x0030, f,0 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f1, 4, 4, 4,0x0031, f,1 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f2, 4, 4, 4,0x0032, f,2 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f3, 4, 4, 4,0x0033, f,3 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f4, 4, 4, 4,0x0034, f,4 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f5, 4, 4, 4,0x0035, f,5 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f6, 4, 4, 4,0x0036, f,6 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f7, 4, 4, 4,0x0037, f,7 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f8, 4, 4, 4,0x0038, f,8 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f9, 4, 4, 4,0x0039, f,9 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f10, 4, 4, 4,0x003A, f,10 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f11, 4, 4, 4,0x003B, f,11 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f12, 4, 4, 4,0x003C, f,12 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f13, 4, 4, 4,0x003D, f,13 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f14, 4, 4, 4,0x003E, f,14 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, f15, 4, 4, 4,0x003F, f,15 , 32,0,0,0) + +#define XCHAL_CP1_SA_NUM 0 +#define XCHAL_CP1_SA_LIST(s) /* empty */ + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 0 +#define XCHAL_CP3_SA_LIST(s) /* empty */ + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 46 +#define XCHAL_CP6_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,1,0, ldcbhi,16, 4, 4,0x0300, ur,0 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ldcblo, 4, 4, 4,0x0301, ur,1 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, stcbhi, 4, 4, 4,0x0302, ur,2 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, stcblo, 4, 4, 4,0x0303, ur,3 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ldbrbase, 4, 4, 4,0x0308, ur,8 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ldbroff, 4, 4, 4,0x0309, ur,9 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ldbrinc, 4, 4, 4,0x030A, ur,10 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, stbrbase, 4, 4, 4,0x030B, ur,11 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, stbroff, 4, 4, 4,0x030C, ur,12 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, stbrinc, 4, 4, 4,0x030D, ur,13 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, scratch0, 4, 4, 4,0x0318, ur,24 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, scratch1, 4, 4, 4,0x0319, ur,25 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, scratch2, 4, 4, 4,0x031A, ur,26 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, scratch3, 4, 4, 4,0x031B, ur,27 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra0,16,16,16,0x1010, wra,0 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra1,16,16,16,0x1011, wra,1 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra2,16,16,16,0x1012, wra,2 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra3,16,16,16,0x1013, wra,3 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra4,16,16,16,0x1014, wra,4 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra5,16,16,16,0x1015, wra,5 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra6,16,16,16,0x1016, wra,6 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra7,16,16,16,0x1017, wra,7 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra8,16,16,16,0x1018, wra,8 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra9,16,16,16,0x1019, wra,9 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra10,16,16,16,0x101A, wra,10 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra11,16,16,16,0x101B, wra,11 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra12,16,16,16,0x101C, wra,12 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra13,16,16,16,0x101D, wra,13 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra14,16,16,16,0x101E, wra,14 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wra15,16,16,16,0x101F, wra,15 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb0,16,16,16,0x1020, wrb,0 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb1,16,16,16,0x1021, wrb,1 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb2,16,16,16,0x1022, wrb,2 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb3,16,16,16,0x1023, wrb,3 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb4,16,16,16,0x1024, wrb,4 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb5,16,16,16,0x1025, wrb,5 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb6,16,16,16,0x1026, wrb,6 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb7,16,16,16,0x1027, wrb,7 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb8,16,16,16,0x1028, wrb,8 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb9,16,16,16,0x1029, wrb,9 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb10,16,16,16,0x102A, wrb,10 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb11,16,16,16,0x102B, wrb,11 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb12,16,16,16,0x102C, wrb,12 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb13,16,16,16,0x102D, wrb,13 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb14,16,16,16,0x102E, wrb,14 ,128,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, wrb15,16,16,16,0x102F, wrb,15 ,128,0,0,0) + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8 + +#endif /*_XTENSA_CORE_TIE_H*/ + diff --git a/arch/xtensa/variants/s6000/irq.c b/arch/xtensa/variants/s6000/irq.c new file mode 100644 index 00000000000..6651e3285fc --- /dev/null +++ b/arch/xtensa/variants/s6000/irq.c @@ -0,0 +1,74 @@ +/* + * s6000 irq crossbar + * + * Copyright (c) 2009 emlix GmbH + * Authors: Johannes Weiner + * Oskar Schirmer + */ +#include +#include +#include + +/* S6_REG_INTC */ +#define INTC_STATUS 0x000 +#define INTC_RAW 0x010 +#define INTC_STATUS_AG 0x100 +#define INTC_CFG(n) (0x200 + 4 * (n)) + +/* + * The s6000 has a crossbar that multiplexes interrupt output lines + * from the peripherals to input lines on the xtensa core. + * + * We leave the mapping decisions to the platform as it depends on the + * actually connected peripherals which distribution makes sense. + */ +extern const signed char *platform_irq_mappings[NR_IRQS]; + +static unsigned long scp_to_intc_enable[] = { +#define TO_INTC_ENABLE(n) (((n) << 1) + 1) + TO_INTC_ENABLE(0), + TO_INTC_ENABLE(1), + TO_INTC_ENABLE(2), + TO_INTC_ENABLE(3), + TO_INTC_ENABLE(4), + TO_INTC_ENABLE(5), + TO_INTC_ENABLE(6), + TO_INTC_ENABLE(7), + TO_INTC_ENABLE(8), + TO_INTC_ENABLE(9), + TO_INTC_ENABLE(10), + TO_INTC_ENABLE(11), + TO_INTC_ENABLE(12), + -1, + -1, + TO_INTC_ENABLE(13), + -1, + TO_INTC_ENABLE(14), + -1, + TO_INTC_ENABLE(15), +#undef TO_INTC_ENABLE +}; + +static void irq_set(unsigned int irq, int enable) +{ + unsigned long en; + const signed char *m = platform_irq_mappings[irq]; + + if (!m) + return; + en = enable ? scp_to_intc_enable[irq] : 0; + while (*m >= 0) { + writel(en, S6_REG_INTC + INTC_CFG(*m)); + m++; + } +} + +void variant_irq_enable(unsigned int irq) +{ + irq_set(irq, 1); +} + +void variant_irq_disable(unsigned int irq) +{ + irq_set(irq, 0); +}