mirror of
https://github.com/adulau/aha.git
synced 2024-12-28 11:46:19 +00:00
Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
This commit is contained in:
Russell King
Russell King
commit
47992cbdae
16 changed files with 1548 additions and 308 deletions
286
Documentation/arm/pxa/mfp.txt
Normal file
286
Documentation/arm/pxa/mfp.txt
Normal file
|
|
@ -0,0 +1,286 @@
|
|||
MFP Configuration for PXA2xx/PXA3xx Processors
|
||||
|
||||
Eric Miao <eric.miao@marvell.com>
|
||||
|
||||
MFP stands for Multi-Function Pin, which is the pin-mux logic on PXA3xx and
|
||||
later PXA series processors. This document describes the existing MFP API,
|
||||
and how board/platform driver authors could make use of it.
|
||||
|
||||
Basic Concept
|
||||
===============
|
||||
|
||||
Unlike the GPIO alternate function settings on PXA25x and PXA27x, a new MFP
|
||||
mechanism is introduced from PXA3xx to completely move the pin-mux functions
|
||||
out of the GPIO controller. In addition to pin-mux configurations, the MFP
|
||||
also controls the low power state, driving strength, pull-up/down and event
|
||||
detection of each pin. Below is a diagram of internal connections between
|
||||
the MFP logic and the remaining SoC peripherals:
|
||||
|
||||
+--------+
|
||||
| |--(GPIO19)--+
|
||||
| GPIO | |
|
||||
| |--(GPIO...) |
|
||||
+--------+ |
|
||||
| +---------+
|
||||
+--------+ +------>| |
|
||||
| PWM2 |--(PWM_OUT)-------->| MFP |
|
||||
+--------+ +------>| |-------> to external PAD
|
||||
| +---->| |
|
||||
+--------+ | | +-->| |
|
||||
| SSP2 |---(TXD)----+ | | +---------+
|
||||
+--------+ | |
|
||||
| |
|
||||
+--------+ | |
|
||||
| Keypad |--(MKOUT4)----+ |
|
||||
+--------+ |
|
||||
|
|
||||
+--------+ |
|
||||
| UART2 |---(TXD)--------+
|
||||
+--------+
|
||||
|
||||
NOTE: the external pad is named as MFP_PIN_GPIO19, it doesn't necessarily
|
||||
mean it's dedicated for GPIO19, only as a hint that internally this pin
|
||||
can be routed from GPIO19 of the GPIO controller.
|
||||
|
||||
To better understand the change from PXA25x/PXA27x GPIO alternate function
|
||||
to this new MFP mechanism, here are several key points:
|
||||
|
||||
1. GPIO controller on PXA3xx is now a dedicated controller, same as other
|
||||
internal controllers like PWM, SSP and UART, with 128 internal signals
|
||||
which can be routed to external through one or more MFPs (e.g. GPIO<0>
|
||||
can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2,
|
||||
see arch/arm/mach-pxa/mach/include/mfp-pxa300.h)
|
||||
|
||||
2. Alternate function configuration is removed from this GPIO controller,
|
||||
the remaining functions are pure GPIO-specific, i.e.
|
||||
|
||||
- GPIO signal level control
|
||||
- GPIO direction control
|
||||
- GPIO level change detection
|
||||
|
||||
3. Low power state for each pin is now controlled by MFP, this means the
|
||||
PGSRx registers on PXA2xx are now useless on PXA3xx
|
||||
|
||||
4. Wakeup detection is now controlled by MFP, PWER does not control the
|
||||
wakeup from GPIO(s) any more, depending on the sleeping state, ADxER
|
||||
(as defined in pxa3xx-regs.h) controls the wakeup from MFP
|
||||
|
||||
NOTE: with such a clear separation of MFP and GPIO, by GPIO<xx> we normally
|
||||
mean it is a GPIO signal, and by MFP<xxx> or pin xxx, we mean a physical
|
||||
pad (or ball).
|
||||
|
||||
MFP API Usage
|
||||
===============
|
||||
|
||||
For board code writers, here are some guidelines:
|
||||
|
||||
1. include ONE of the following header files in your <board>.c:
|
||||
|
||||
- #include <mach/mfp-pxa25x.h>
|
||||
- #include <mach/mfp-pxa27x.h>
|
||||
- #include <mach/mfp-pxa300.h>
|
||||
- #include <mach/mfp-pxa320.h>
|
||||
- #include <mach/mfp-pxa930.h>
|
||||
|
||||
NOTE: only one file in your <board>.c, depending on the processors used,
|
||||
because pin configuration definitions may conflict in these file (i.e.
|
||||
same name, different meaning and settings on different processors). E.g.
|
||||
for zylonite platform, which support both PXA300/PXA310 and PXA320, two
|
||||
separate files are introduced: zylonite_pxa300.c and zylonite_pxa320.c
|
||||
(in addition to handle MFP configuration differences, they also handle
|
||||
the other differences between the two combinations).
|
||||
|
||||
NOTE: PXA300 and PXA310 are almost identical in pin configurations (with
|
||||
PXA310 supporting some additional ones), thus the difference is actually
|
||||
covered in a single mfp-pxa300.h.
|
||||
|
||||
2. prepare an array for the initial pin configurations, e.g.:
|
||||
|
||||
static unsigned long mainstone_pin_config[] __initdata = {
|
||||
/* Chip Select */
|
||||
GPIO15_nCS_1,
|
||||
|
||||
/* LCD - 16bpp Active TFT */
|
||||
GPIOxx_TFT_LCD_16BPP,
|
||||
GPIO16_PWM0_OUT, /* Backlight */
|
||||
|
||||
/* MMC */
|
||||
GPIO32_MMC_CLK,
|
||||
GPIO112_MMC_CMD,
|
||||
GPIO92_MMC_DAT_0,
|
||||
GPIO109_MMC_DAT_1,
|
||||
GPIO110_MMC_DAT_2,
|
||||
GPIO111_MMC_DAT_3,
|
||||
|
||||
...
|
||||
|
||||
/* GPIO */
|
||||
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||
};
|
||||
|
||||
a) once the pin configurations are passed to pxa{2xx,3xx}_mfp_config(),
|
||||
and written to the actual registers, they are useless and may discard,
|
||||
adding '__initdata' will help save some additional bytes here.
|
||||
|
||||
b) when there is only one possible pin configurations for a component,
|
||||
some simplified definitions can be used, e.g. GPIOxx_TFT_LCD_16BPP on
|
||||
PXA25x and PXA27x processors
|
||||
|
||||
c) if by board design, a pin can be configured to wake up the system
|
||||
from low power state, it can be 'OR'ed with any of:
|
||||
|
||||
WAKEUP_ON_EDGE_BOTH
|
||||
WAKEUP_ON_EDGE_RISE
|
||||
WAKEUP_ON_EDGE_FALL
|
||||
WAKEUP_ON_LEVEL_HIGH - specifically for enabling of keypad GPIOs,
|
||||
|
||||
to indicate that this pin has the capability of wake-up the system,
|
||||
and on which edge(s). This, however, doesn't necessarily mean the
|
||||
pin _will_ wakeup the system, it will only when set_irq_wake() is
|
||||
invoked with the corresponding GPIO IRQ (GPIO_IRQ(xx) or gpio_to_irq())
|
||||
and eventually calls gpio_set_wake() for the actual register setting.
|
||||
|
||||
d) although PXA3xx MFP supports edge detection on each pin, the
|
||||
internal logic will only wakeup the system when those specific bits
|
||||
in ADxER registers are set, which can be well mapped to the
|
||||
corresponding peripheral, thus set_irq_wake() can be called with
|
||||
the peripheral IRQ to enable the wakeup.
|
||||
|
||||
|
||||
MFP on PXA3xx
|
||||
===============
|
||||
|
||||
Every external I/O pad on PXA3xx (excluding those for special purpose) has
|
||||
one MFP logic associated, and is controlled by one MFP register (MFPR).
|
||||
|
||||
The MFPR has the following bit definitions (for PXA300/PXA310/PXA320):
|
||||
|
||||
31 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
|
||||
+-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|
||||
| RESERVED |PS|PU|PD| DRIVE |SS|SD|SO|EC|EF|ER|--| AF_SEL |
|
||||
+-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|
||||
|
||||
Bit 3: RESERVED
|
||||
Bit 4: EDGE_RISE_EN - enable detection of rising edge on this pin
|
||||
Bit 5: EDGE_FALL_EN - enable detection of falling edge on this pin
|
||||
Bit 6: EDGE_CLEAR - disable edge detection on this pin
|
||||
Bit 7: SLEEP_OE_N - enable outputs during low power modes
|
||||
Bit 8: SLEEP_DATA - output data on the pin during low power modes
|
||||
Bit 9: SLEEP_SEL - selection control for low power modes signals
|
||||
Bit 13: PULLDOWN_EN - enable the internal pull-down resistor on this pin
|
||||
Bit 14: PULLUP_EN - enable the internal pull-up resistor on this pin
|
||||
Bit 15: PULL_SEL - pull state controlled by selected alternate function
|
||||
(0) or by PULL{UP,DOWN}_EN bits (1)
|
||||
|
||||
Bit 0 - 2: AF_SEL - alternate function selection, 8 possibilities, from 0-7
|
||||
Bit 10-12: DRIVE - drive strength and slew rate
|
||||
0b000 - fast 1mA
|
||||
0b001 - fast 2mA
|
||||
0b002 - fast 3mA
|
||||
0b003 - fast 4mA
|
||||
0b004 - slow 6mA
|
||||
0b005 - fast 6mA
|
||||
0b006 - slow 10mA
|
||||
0b007 - fast 10mA
|
||||
|
||||
MFP Design for PXA2xx/PXA3xx
|
||||
==============================
|
||||
|
||||
Due to the difference of pin-mux handling between PXA2xx and PXA3xx, a unified
|
||||
MFP API is introduced to cover both series of processors.
|
||||
|
||||
The basic idea of this design is to introduce definitions for all possible pin
|
||||
configurations, these definitions are processor and platform independent, and
|
||||
the actual API invoked to convert these definitions into register settings and
|
||||
make them effective there-after.
|
||||
|
||||
Files Involved
|
||||
--------------
|
||||
|
||||
- arch/arm/mach-pxa/include/mach/mfp.h
|
||||
|
||||
for
|
||||
1. Unified pin definitions - enum constants for all configurable pins
|
||||
2. processor-neutral bit definitions for a possible MFP configuration
|
||||
|
||||
- arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
|
||||
|
||||
for PXA3xx specific MFPR register bit definitions and PXA3xx common pin
|
||||
configurations
|
||||
|
||||
- arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
|
||||
|
||||
for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations
|
||||
|
||||
- arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
|
||||
arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
|
||||
arch/arm/mach-pxa/include/mach/mfp-pxa300.h
|
||||
arch/arm/mach-pxa/include/mach/mfp-pxa320.h
|
||||
arch/arm/mach-pxa/include/mach/mfp-pxa930.h
|
||||
|
||||
for processor specific definitions
|
||||
|
||||
- arch/arm/mach-pxa/mfp-pxa3xx.c
|
||||
- arch/arm/mach-pxa/mfp-pxa2xx.c
|
||||
|
||||
for implementation of the pin configuration to take effect for the actual
|
||||
processor.
|
||||
|
||||
Pin Configuration
|
||||
-----------------
|
||||
|
||||
The following comments are copied from mfp.h (see the actual source code
|
||||
for most updated info)
|
||||
|
||||
/*
|
||||
* a possible MFP configuration is represented by a 32-bit integer
|
||||
*
|
||||
* bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
|
||||
* bit 10..12 - Alternate Function Selection
|
||||
* bit 13..15 - Drive Strength
|
||||
* bit 16..18 - Low Power Mode State
|
||||
* bit 19..20 - Low Power Mode Edge Detection
|
||||
* bit 21..22 - Run Mode Pull State
|
||||
*
|
||||
* to facilitate the definition, the following macros are provided
|
||||
*
|
||||
* MFP_CFG_DEFAULT - default MFP configuration value, with
|
||||
* alternate function = 0,
|
||||
* drive strength = fast 3mA (MFP_DS03X)
|
||||
* low power mode = default
|
||||
* edge detection = none
|
||||
*
|
||||
* MFP_CFG - default MFPR value with alternate function
|
||||
* MFP_CFG_DRV - default MFPR value with alternate function and
|
||||
* pin drive strength
|
||||
* MFP_CFG_LPM - default MFPR value with alternate function and
|
||||
* low power mode
|
||||
* MFP_CFG_X - default MFPR value with alternate function,
|
||||
* pin drive strength and low power mode
|
||||
*/
|
||||
|
||||
Examples of pin configurations are:
|
||||
|
||||
#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
|
||||
|
||||
which reads GPIO94 can be configured as SSP3_RXD, with alternate function
|
||||
selection of 1, driving strength of 0b101, and a float state in low power
|
||||
modes.
|
||||
|
||||
NOTE: this is the default setting of this pin being configured as SSP3_RXD
|
||||
which can be modified a bit in board code, though it is not recommended to
|
||||
do so, simply because this default setting is usually carefully encoded,
|
||||
and is supposed to work in most cases.
|
||||
|
||||
Register Settings
|
||||
-----------------
|
||||
|
||||
Register settings on PXA3xx for a pin configuration is actually very
|
||||
straight-forward, most bits can be converted directly into MFPR value
|
||||
in a easier way. Two sets of MFPR values are calculated: the run-time
|
||||
ones and the low power mode ones, to allow different settings.
|
||||
|
||||
The conversion from a generic pin configuration to the actual register
|
||||
settings on PXA2xx is a bit complicated: many registers are involved,
|
||||
including GAFRx, GPDRx, PGSRx, PWER, PKWR, PFER and PRER. Please see
|
||||
mfp-pxa2xx.c for how the conversion is made.
|
||||
|
|
@ -5,9 +5,13 @@ The driver supports the following options, either via
|
|||
options=<OPTIONS> when modular or video=pxafb:<OPTIONS> when built in.
|
||||
|
||||
For example:
|
||||
modprobe pxafb options=mode:640x480-8,passive
|
||||
modprobe pxafb options=vmem:2M,mode:640x480-8,passive
|
||||
or on the kernel command line
|
||||
video=pxafb:mode:640x480-8,passive
|
||||
video=pxafb:vmem:2M,mode:640x480-8,passive
|
||||
|
||||
vmem: VIDEO_MEM_SIZE
|
||||
Amount of video memory to allocate (can be suffixed with K or M
|
||||
for kilobytes or megabytes)
|
||||
|
||||
mode:XRESxYRES[-BPP]
|
||||
XRES == LCCR1_PPL + 1
|
||||
|
|
@ -52,3 +56,87 @@ outputen:POLARITY
|
|||
pixclockpol:POLARITY
|
||||
pixel clock polarity
|
||||
0 => falling edge, 1 => rising edge
|
||||
|
||||
|
||||
Overlay Support for PXA27x and later LCD controllers
|
||||
====================================================
|
||||
|
||||
PXA27x and later processors support overlay1 and overlay2 on-top of the
|
||||
base framebuffer (although under-neath the base is also possible). They
|
||||
support palette and no-palette RGB formats, as well as YUV formats (only
|
||||
available on overlay2). These overlays have dedicated DMA channels and
|
||||
behave in a similar way as a framebuffer.
|
||||
|
||||
However, there are some differences between these overlay framebuffers
|
||||
and normal framebuffers, as listed below:
|
||||
|
||||
1. overlay can start at a 32-bit word aligned position within the base
|
||||
framebuffer, which means they have a start (x, y). This information
|
||||
is encoded into var->nonstd (no, var->xoffset and var->yoffset are
|
||||
not for such purpose).
|
||||
|
||||
2. overlay framebuffer is allocated dynamically according to specified
|
||||
'struct fb_var_screeninfo', the amount is decided by:
|
||||
|
||||
var->xres_virtual * var->yres_virtual * bpp
|
||||
|
||||
bpp = 16 -- for RGB565 or RGBT555
|
||||
= 24 -- for YUV444 packed
|
||||
= 24 -- for YUV444 planar
|
||||
= 16 -- for YUV422 planar (1 pixel = 1 Y + 1/2 Cb + 1/2 Cr)
|
||||
= 12 -- for YUV420 planar (1 pixel = 1 Y + 1/4 Cb + 1/4 Cr)
|
||||
|
||||
NOTE:
|
||||
|
||||
a. overlay does not support panning in x-direction, thus
|
||||
var->xres_virtual will always be equal to var->xres
|
||||
|
||||
b. line length of overlay(s) must be on a 32-bit word boundary,
|
||||
for YUV planar modes, it is a requirement for the component
|
||||
with minimum bits per pixel, e.g. for YUV420, Cr component
|
||||
for one pixel is actually 2-bits, it means the line length
|
||||
should be a multiple of 16-pixels
|
||||
|
||||
c. starting horizontal position (XPOS) should start on a 32-bit
|
||||
word boundary, otherwise the fb_check_var() will just fail.
|
||||
|
||||
d. the rectangle of the overlay should be within the base plane,
|
||||
otherwise fail
|
||||
|
||||
Applications should follow the sequence below to operate an overlay
|
||||
framebuffer:
|
||||
|
||||
a. open("/dev/fb[1-2]", ...)
|
||||
b. ioctl(fd, FBIOGET_VSCREENINFO, ...)
|
||||
c. modify 'var' with desired parameters:
|
||||
1) var->xres and var->yres
|
||||
2) larger var->yres_virtual if more memory is required,
|
||||
usually for double-buffering
|
||||
3) var->nonstd for starting (x, y) and color format
|
||||
4) var->{red, green, blue, transp} if RGB mode is to be used
|
||||
d. ioctl(fd, FBIOPUT_VSCREENINFO, ...)
|
||||
e. ioctl(fd, FBIOGET_FSCREENINFO, ...)
|
||||
f. mmap
|
||||
g. ...
|
||||
|
||||
3. for YUV planar formats, these are actually not supported within the
|
||||
framebuffer framework, application has to take care of the offsets
|
||||
and lengths of each component within the framebuffer.
|
||||
|
||||
4. var->nonstd is used to pass starting (x, y) position and color format,
|
||||
the detailed bit fields are shown below:
|
||||
|
||||
31 23 20 10 0
|
||||
+-----------------+---+----------+----------+
|
||||
| ... unused ... |FOR| XPOS | YPOS |
|
||||
+-----------------+---+----------+----------+
|
||||
|
||||
FOR - color format, as defined by OVERLAY_FORMAT_* in pxafb.h
|
||||
0 - RGB
|
||||
1 - YUV444 PACKED
|
||||
2 - YUV444 PLANAR
|
||||
3 - YUV422 PLANAR
|
||||
4 - YUR420 PLANAR
|
||||
|
||||
XPOS - starting horizontal position
|
||||
YPOS - starting vertical position
|
||||
|
|
|
|||
|
|
@ -24,6 +24,7 @@
|
|||
#include <asm/system.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/pxa-regs.h>
|
||||
#include <mach/reset.h>
|
||||
|
|
@ -39,6 +40,21 @@ void clear_reset_status(unsigned int mask)
|
|||
pxa3xx_clear_reset_status(mask);
|
||||
}
|
||||
|
||||
unsigned long get_clock_tick_rate(void)
|
||||
{
|
||||
unsigned long clock_tick_rate;
|
||||
|
||||
if (cpu_is_pxa25x())
|
||||
clock_tick_rate = 3686400;
|
||||
else if (machine_is_mainstone())
|
||||
clock_tick_rate = 3249600;
|
||||
else
|
||||
clock_tick_rate = 3250000;
|
||||
|
||||
return clock_tick_rate;
|
||||
}
|
||||
EXPORT_SYMBOL(get_clock_tick_rate);
|
||||
|
||||
/*
|
||||
* Get the clock frequency as reflected by CCCR and the turbo flag.
|
||||
* We assume these values have been applied via a fcs.
|
||||
|
|
|
|||
|
|
@ -291,6 +291,8 @@
|
|||
*/
|
||||
extern unsigned int get_memclk_frequency_10khz(void);
|
||||
|
||||
/* return the clock tick rate of the OS timer */
|
||||
extern unsigned long get_clock_tick_rate(void);
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
|
||||
|
|
|
|||
|
|
@ -421,6 +421,7 @@
|
|||
#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
|
||||
#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
|
||||
#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
|
||||
#define GPIO32_PWM0 MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
|
||||
|
||||
/* CIR */
|
||||
#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1)
|
||||
|
|
|
|||
|
|
@ -113,6 +113,7 @@ struct pxafb_mach_info {
|
|||
unsigned int num_modes;
|
||||
|
||||
unsigned int lcd_conn;
|
||||
unsigned long video_mem_size;
|
||||
|
||||
u_int fixed_modes:1,
|
||||
cmap_inverse:1,
|
||||
|
|
|
|||
|
|
@ -12,27 +12,29 @@
|
|||
#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */
|
||||
#define LCCR4 (0x010) /* LCD Controller Control Register 4 */
|
||||
#define LCCR5 (0x014) /* LCD Controller Control Register 5 */
|
||||
#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
|
||||
#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
|
||||
#define LCSR (0x038) /* LCD Controller Status Register */
|
||||
#define LCSR (0x038) /* LCD Controller Status Register 0 */
|
||||
#define LCSR1 (0x034) /* LCD Controller Status Register 1 */
|
||||
#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */
|
||||
#define TMEDRGBR (0x040) /* TMED RGB Seed Register */
|
||||
#define TMEDCR (0x044) /* TMED Control Register */
|
||||
|
||||
#define FBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
|
||||
#define FBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
|
||||
#define FBR2 (0x028) /* DMA Channel 2 Frame Branch Register */
|
||||
#define FBR3 (0x02C) /* DMA Channel 2 Frame Branch Register */
|
||||
#define FBR4 (0x030) /* DMA Channel 2 Frame Branch Register */
|
||||
#define FBR5 (0x110) /* DMA Channel 2 Frame Branch Register */
|
||||
#define FBR6 (0x114) /* DMA Channel 2 Frame Branch Register */
|
||||
|
||||
#define OVL1C1 (0x050) /* Overlay 1 Control Register 1 */
|
||||
#define OVL1C2 (0x060) /* Overlay 1 Control Register 2 */
|
||||
#define OVL2C1 (0x070) /* Overlay 2 Control Register 1 */
|
||||
#define OVL2C2 (0x080) /* Overlay 2 Control Register 2 */
|
||||
|
||||
#define CMDCR (0x100) /* Command Control Register */
|
||||
#define PRSR (0x104) /* Panel Read Status Register */
|
||||
|
||||
#define LCCR3_1BPP (0 << 24)
|
||||
#define LCCR3_2BPP (1 << 24)
|
||||
#define LCCR3_4BPP (2 << 24)
|
||||
#define LCCR3_8BPP (3 << 24)
|
||||
#define LCCR3_16BPP (4 << 24)
|
||||
#define LCCR3_18BPP (5 << 24)
|
||||
#define LCCR3_18BPP_P (6 << 24)
|
||||
#define LCCR3_19BPP (7 << 24)
|
||||
#define LCCR3_19BPP_P (1 << 29)
|
||||
#define LCCR3_24BPP ((1 << 29) | (1 << 24))
|
||||
#define LCCR3_25BPP ((1 << 29) | (2 << 24))
|
||||
#define LCCR3_BPP(x) ((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
|
||||
|
||||
#define LCCR3_PDFOR_0 (0 << 30)
|
||||
#define LCCR3_PDFOR_1 (1 << 30)
|
||||
|
|
@ -42,19 +44,16 @@
|
|||
#define LCCR4_PAL_FOR_0 (0 << 15)
|
||||
#define LCCR4_PAL_FOR_1 (1 << 15)
|
||||
#define LCCR4_PAL_FOR_2 (2 << 15)
|
||||
#define LCCR4_PAL_FOR_3 (3 << 15)
|
||||
#define LCCR4_PAL_FOR_MASK (3 << 15)
|
||||
|
||||
#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */
|
||||
#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */
|
||||
#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */
|
||||
#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */
|
||||
#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */
|
||||
#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */
|
||||
#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */
|
||||
#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */
|
||||
#define FDADR2 (0x220) /* DMA Channel 2 Frame Descriptor Address Register */
|
||||
#define FDADR3 (0x230) /* DMA Channel 3 Frame Descriptor Address Register */
|
||||
#define FDADR4 (0x240) /* DMA Channel 4 Frame Descriptor Address Register */
|
||||
#define FDADR5 (0x250) /* DMA Channel 5 Frame Descriptor Address Register */
|
||||
#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */
|
||||
#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */
|
||||
#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */
|
||||
|
||||
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
|
||||
#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
|
||||
|
|
@ -126,9 +125,6 @@
|
|||
#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
|
||||
#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD)))
|
||||
|
||||
#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
|
||||
#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP)))
|
||||
|
||||
#define LCCR3_ACB Fld (8, 8) /* AC Bias */
|
||||
#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB)))
|
||||
|
||||
|
|
@ -157,8 +153,22 @@
|
|||
#define LCSR_RD_ST (1 << 11) /* read status */
|
||||
#define LCSR_CMD_INT (1 << 12) /* command interrupt */
|
||||
|
||||
#define LCSR1_IU(x) (1 << ((x) + 23)) /* Input FIFO underrun */
|
||||
#define LCSR1_BS(x) (1 << ((x) + 15)) /* Branch Status */
|
||||
#define LCSR1_EOF(x) (1 << ((x) + 7)) /* End of Frame Status */
|
||||
#define LCSR1_SOF(x) (1 << ((x) - 1)) /* Start of Frame Status */
|
||||
|
||||
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
|
||||
|
||||
/* overlay control registers */
|
||||
#define OVLxC1_PPL(x) ((((x) - 1) & 0x3ff) << 0) /* Pixels Per Line */
|
||||
#define OVLxC1_LPO(x) ((((x) - 1) & 0x3ff) << 10) /* Number of Lines */
|
||||
#define OVLxC1_BPP(x) (((x) & 0xf) << 20) /* Bits Per Pixel */
|
||||
#define OVLxC1_OEN (1 << 31) /* Enable bit for Overlay */
|
||||
#define OVLxC2_XPOS(x) (((x) & 0x3ff) << 0) /* Horizontal Position */
|
||||
#define OVLxC2_YPOS(x) (((x) & 0x3ff) << 10) /* Vertical Position */
|
||||
#define OVL2C2_PFOR(x) (((x) & 0x7) << 20) /* Pixel Format */
|
||||
|
||||
/* smartpanel related */
|
||||
#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */
|
||||
#define PRSR_A0 (1 << 8) /* Read Data Source */
|
||||
|
|
|
|||
|
|
@ -10,6 +10,14 @@
|
|||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
|
||||
* those drivers to at least work, the definition is provided here.
|
||||
*
|
||||
* NOTE: this is no longer accurate when multiple processors and boards
|
||||
* are selected, newer drivers should not depend on this any more. Use
|
||||
* either the clocksource/clockevent or get this at run-time by calling
|
||||
* get_clock_tick_rate() (as defined in generic.c).
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_PXA25x)
|
||||
/* PXA250/210 timer base */
|
||||
|
|
|
|||
|
|
@ -18,12 +18,15 @@
|
|||
#include <linux/clk.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/smc91x.h>
|
||||
#include <linux/pwm_backlight.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/pxa3xx-regs.h>
|
||||
#include <mach/mfp-pxa930.h>
|
||||
#include <mach/pxafb.h>
|
||||
#include <mach/pxa27x_keypad.h>
|
||||
|
||||
#include "devices.h"
|
||||
#include "generic.h"
|
||||
|
|
@ -33,6 +36,45 @@ static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
|
|||
/* Ethernet */
|
||||
DF_nCS1_nCS3,
|
||||
GPIO47_GPIO,
|
||||
|
||||
/* LCD */
|
||||
GPIO23_LCD_DD0,
|
||||
GPIO24_LCD_DD1,
|
||||
GPIO25_LCD_DD2,
|
||||
GPIO26_LCD_DD3,
|
||||
GPIO27_LCD_DD4,
|
||||
GPIO28_LCD_DD5,
|
||||
GPIO29_LCD_DD6,
|
||||
GPIO44_LCD_DD7,
|
||||
GPIO21_LCD_CS,
|
||||
GPIO22_LCD_CS2,
|
||||
|
||||
GPIO17_LCD_FCLK_RD,
|
||||
GPIO18_LCD_LCLK_A0,
|
||||
GPIO19_LCD_PCLK_WR,
|
||||
|
||||
/* LCD Backlight */
|
||||
GPIO43_PWM3, /* primary backlight */
|
||||
GPIO32_PWM0, /* secondary backlight */
|
||||
|
||||
/* Keypad */
|
||||
GPIO0_KP_MKIN_0,
|
||||
GPIO2_KP_MKIN_1,
|
||||
GPIO4_KP_MKIN_2,
|
||||
GPIO6_KP_MKIN_3,
|
||||
GPIO8_KP_MKIN_4,
|
||||
GPIO10_KP_MKIN_5,
|
||||
GPIO12_KP_MKIN_6,
|
||||
GPIO1_KP_MKOUT_0,
|
||||
GPIO3_KP_MKOUT_1,
|
||||
GPIO5_KP_MKOUT_2,
|
||||
GPIO7_KP_MKOUT_3,
|
||||
GPIO9_KP_MKOUT_4,
|
||||
GPIO11_KP_MKOUT_5,
|
||||
GPIO13_KP_MKOUT_6,
|
||||
|
||||
GPIO14_KP_DKIN_2,
|
||||
GPIO15_KP_DKIN_3,
|
||||
};
|
||||
|
||||
#define TAVOREVB_ETH_PHYS (0x14000000)
|
||||
|
|
@ -64,12 +106,382 @@ static struct platform_device smc91x_device = {
|
|||
},
|
||||
};
|
||||
|
||||
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
|
||||
static unsigned int tavorevb_matrix_key_map[] = {
|
||||
/* KEY(row, col, key_code) */
|
||||
KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
|
||||
KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
|
||||
KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
|
||||
KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
|
||||
KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
|
||||
KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
|
||||
|
||||
KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
|
||||
|
||||
KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
|
||||
KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
|
||||
KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
|
||||
|
||||
KEY(6, 6, KEY_SPACE),
|
||||
KEY(0, 0, KEY_KPASTERISK), /* * */
|
||||
KEY(0, 1, KEY_KPDOT), /* # */
|
||||
|
||||
KEY(4, 1, KEY_UP),
|
||||
KEY(4, 3, KEY_DOWN),
|
||||
KEY(4, 0, KEY_LEFT),
|
||||
KEY(4, 2, KEY_RIGHT),
|
||||
KEY(6, 0, KEY_HOME),
|
||||
KEY(3, 2, KEY_END),
|
||||
KEY(6, 1, KEY_DELETE),
|
||||
KEY(5, 2, KEY_BACK),
|
||||
KEY(6, 3, KEY_CAPSLOCK), /* KEY_LEFTSHIFT), */
|
||||
|
||||
KEY(4, 4, KEY_ENTER), /* scroll push */
|
||||
KEY(6, 2, KEY_ENTER), /* keypad action */
|
||||
|
||||
KEY(3, 1, KEY_SEND),
|
||||
KEY(5, 3, KEY_RECORD),
|
||||
KEY(5, 0, KEY_VOLUMEUP),
|
||||
KEY(5, 1, KEY_VOLUMEDOWN),
|
||||
|
||||
KEY(3, 0, KEY_F22), /* soft1 */
|
||||
KEY(3, 3, KEY_F23), /* soft2 */
|
||||
};
|
||||
|
||||
static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
|
||||
.matrix_key_rows = 7,
|
||||
.matrix_key_cols = 7,
|
||||
.matrix_key_map = tavorevb_matrix_key_map,
|
||||
.matrix_key_map_size = ARRAY_SIZE(tavorevb_matrix_key_map),
|
||||
.debounce_interval = 30,
|
||||
};
|
||||
|
||||
static void __init tavorevb_init_keypad(void)
|
||||
{
|
||||
pxa_set_keypad_info(&tavorevb_keypad_info);
|
||||
}
|
||||
#else
|
||||
static inline void tavorevb_init_keypad(void) {}
|
||||
#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
|
||||
|
||||
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
||||
static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
|
||||
[0] = {
|
||||
/* primary backlight */
|
||||
.pwm_id = 2,
|
||||
.max_brightness = 100,
|
||||
.dft_brightness = 100,
|
||||
.pwm_period_ns = 100000,
|
||||
},
|
||||
[1] = {
|
||||
/* secondary backlight */
|
||||
.pwm_id = 0,
|
||||
.max_brightness = 100,
|
||||
.dft_brightness = 100,
|
||||
.pwm_period_ns = 100000,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device tavorevb_backlight_devices[] = {
|
||||
[0] = {
|
||||
.name = "pwm-backlight",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &tavorevb_backlight_data[0],
|
||||
},
|
||||
},
|
||||
[1] = {
|
||||
.name = "pwm-backlight",
|
||||
.id = 1,
|
||||
.dev = {
|
||||
.platform_data = &tavorevb_backlight_data[1],
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
static uint16_t panel_init[] = {
|
||||
/* DSTB OUT */
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD_NOOP,
|
||||
SMART_DELAY(1),
|
||||
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD_NOOP,
|
||||
SMART_DELAY(1),
|
||||
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD_NOOP,
|
||||
SMART_DELAY(1),
|
||||
|
||||
/* STB OUT */
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x1D),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x05),
|
||||
SMART_DELAY(1),
|
||||
|
||||
/* P-ON Init sequence */
|
||||
SMART_CMD(0x00), /* OSC ON */
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
|
||||
SMART_DAT(0x01),
|
||||
SMART_DAT(0x27),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x02), /* LINE INV */
|
||||
SMART_DAT(0x02),
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x03), /* IF mode(1) */
|
||||
SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
|
||||
SMART_DAT(0x30),
|
||||
SMART_CMD(0x07),
|
||||
SMART_CMD(0x00), /* RAM Write Mode */
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x03),
|
||||
SMART_CMD(0x00),
|
||||
|
||||
/* DISPLAY Setting, 262K, fixed(NO scroll), no split screen */
|
||||
SMART_CMD(0x07),
|
||||
SMART_DAT(0x40), /* 16/18/19 BPP */
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
|
||||
SMART_DAT(0x03),
|
||||
SMART_DAT(0x02),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x10),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
|
||||
SMART_DAT(0x03),
|
||||
SMART_DAT(0x02),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
|
||||
SMART_DAT(0x01),
|
||||
SMART_DAT(0x02),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
|
||||
SMART_DAT(0x20),
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x1C),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x03),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0x04),
|
||||
SMART_DAT(0x03),
|
||||
SMART_CMD(0x03),
|
||||
SMART_CMD(0x01),
|
||||
SMART_DAT(0x03),
|
||||
SMART_DAT(0x04),
|
||||
SMART_CMD(0x03),
|
||||
SMART_CMD(0x02),
|
||||
SMART_DAT(0x04),
|
||||
SMART_DAT(0x03),
|
||||
SMART_CMD(0x03),
|
||||
SMART_CMD(0x03),
|
||||
SMART_DAT(0x03),
|
||||
SMART_DAT(0x03),
|
||||
SMART_CMD(0x03),
|
||||
SMART_CMD(0x04),
|
||||
SMART_DAT(0x01),
|
||||
SMART_DAT(0x01),
|
||||
SMART_CMD(0x03),
|
||||
SMART_CMD(0x05),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x04),
|
||||
SMART_CMD(0x02),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x04),
|
||||
SMART_CMD(0x03),
|
||||
SMART_DAT(0x01),
|
||||
SMART_DAT(0x3F),
|
||||
SMART_DELAY(0),
|
||||
|
||||
/* DISP RAM setting: 240*320 */
|
||||
SMART_CMD(0x04), /* HADDR, START 0 */
|
||||
SMART_CMD(0x06),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x00), /* x1,3 */
|
||||
SMART_CMD(0x04), /* HADDR, END 4 */
|
||||
SMART_CMD(0x07),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0xEF), /* x2, 7 */
|
||||
SMART_CMD(0x04), /* VADDR, START 8 */
|
||||
SMART_CMD(0x08),
|
||||
SMART_DAT(0x00), /* y1, 10 */
|
||||
SMART_DAT(0x00), /* y1, 11 */
|
||||
SMART_CMD(0x04), /* VADDR, END 12 */
|
||||
SMART_CMD(0x09),
|
||||
SMART_DAT(0x01), /* y2, 14 */
|
||||
SMART_DAT(0x3F), /* y2, 15 */
|
||||
SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x00), /* x1, 19 */
|
||||
SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
|
||||
SMART_CMD(0x01),
|
||||
SMART_DAT(0x00), /* y1, 22 */
|
||||
SMART_DAT(0x00), /* y1, 23 */
|
||||
};
|
||||
|
||||
static uint16_t panel_on[] = {
|
||||
/* Power-IC ON */
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x02),
|
||||
SMART_DAT(0x07),
|
||||
SMART_DAT(0x7D),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x03),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x05),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x04),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x05),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x15),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0xC0),
|
||||
SMART_DAT(0x10),
|
||||
SMART_DELAY(30),
|
||||
|
||||
/* DISP ON */
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x01),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x01),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0xFF),
|
||||
SMART_DAT(0xFE),
|
||||
SMART_DELAY(150),
|
||||
};
|
||||
|
||||
static uint16_t panel_off[] = {
|
||||
SMART_CMD(0x00),
|
||||
SMART_CMD(0x1E),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x0A),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0xFF),
|
||||
SMART_DAT(0xEE),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0xF8),
|
||||
SMART_DAT(0x12),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0xE8),
|
||||
SMART_DAT(0x11),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0xC0),
|
||||
SMART_DAT(0x11),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0x40),
|
||||
SMART_DAT(0x11),
|
||||
SMART_CMD(0x01),
|
||||
SMART_CMD(0x00),
|
||||
SMART_DAT(0x00),
|
||||
SMART_DAT(0x10),
|
||||
};
|
||||
|
||||
static uint16_t update_framedata[] = {
|
||||
/* write ram */
|
||||
SMART_CMD(0x02),
|
||||
SMART_CMD(0x02),
|
||||
|
||||
/* write frame data */
|
||||
SMART_CMD_WRITE_FRAME,
|
||||
};
|
||||
|
||||
static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
|
||||
{
|
||||
struct fb_info *info = container_of(var, struct fb_info, var);
|
||||
|
||||
if (on) {
|
||||
pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
|
||||
pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
|
||||
} else {
|
||||
pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
|
||||
}
|
||||
|
||||
if (pxafb_smart_flush(info))
|
||||
pr_err("%s: timed out\n", __func__);
|
||||
}
|
||||
|
||||
static void ltm020d550_update(struct fb_info *info)
|
||||
{
|
||||
pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
|
||||
pxafb_smart_flush(info);
|
||||
}
|
||||
|
||||
static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
|
||||
[0] = {
|
||||
.xres = 240,
|
||||
.yres = 320,
|
||||
.bpp = 16,
|
||||
.a0csrd_set_hld = 30,
|
||||
.a0cswr_set_hld = 30,
|
||||
.wr_pulse_width = 30,
|
||||
.rd_pulse_width = 170,
|
||||
.op_hold_time = 30,
|
||||
.cmd_inh_time = 60,
|
||||
|
||||
/* L_LCLK_A0 and L_LCLK_RD active low */
|
||||
.sync = FB_SYNC_HOR_HIGH_ACT |
|
||||
FB_SYNC_VERT_HIGH_ACT,
|
||||
},
|
||||
};
|
||||
|
||||
static struct pxafb_mach_info tavorevb_lcd_info = {
|
||||
.modes = toshiba_ltm020d550_modes,
|
||||
.num_modes = 1,
|
||||
.lcd_conn = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
|
||||
.pxafb_lcd_power = ltm020d550_lcd_power,
|
||||
.smart_update = ltm020d550_update,
|
||||
};
|
||||
|
||||
static void __init tavorevb_init_lcd(void)
|
||||
{
|
||||
platform_device_register(&tavorevb_backlight_devices[0]);
|
||||
platform_device_register(&tavorevb_backlight_devices[1]);
|
||||
set_pxa_fb_info(&tavorevb_lcd_info);
|
||||
}
|
||||
#else
|
||||
static inline void tavorevb_init_lcd(void) {}
|
||||
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
|
||||
|
||||
static void __init tavorevb_init(void)
|
||||
{
|
||||
/* initialize MFP configurations */
|
||||
pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
|
||||
|
||||
platform_device_register(&smc91x_device);
|
||||
|
||||
tavorevb_init_lcd();
|
||||
tavorevb_init_keypad();
|
||||
}
|
||||
|
||||
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
|
||||
|
|
|
|||
|
|
@ -24,7 +24,6 @@
|
|||
#include <asm/mach/time.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/pxa-regs.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
/*
|
||||
* This is PXA's sched_clock implementation. This has a resolution
|
||||
|
|
@ -151,18 +150,11 @@ static struct irqaction pxa_ost0_irq = {
|
|||
|
||||
static void __init pxa_timer_init(void)
|
||||
{
|
||||
unsigned long clock_tick_rate;
|
||||
unsigned long clock_tick_rate = get_clock_tick_rate();
|
||||
|
||||
OIER = 0;
|
||||
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
|
||||
|
||||
if (cpu_is_pxa25x())
|
||||
clock_tick_rate = 3686400;
|
||||
else if (machine_is_mainstone())
|
||||
clock_tick_rate = 3249600;
|
||||
else
|
||||
clock_tick_rate = 3250000;
|
||||
|
||||
set_oscr2ns_scale(clock_tick_rate);
|
||||
|
||||
ckevt_pxa_osmr0.mult =
|
||||
|
|
|
|||
|
|
@ -59,6 +59,10 @@
|
|||
# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
|
||||
# define __PREG(x) (io_v2p((unsigned long)&(x)))
|
||||
|
||||
static inline unsigned long get_clock_tick_rate(void)
|
||||
{
|
||||
return 3686400;
|
||||
}
|
||||
#else
|
||||
|
||||
# define __REG(x) io_p2v(x)
|
||||
|
|
|
|||
|
|
@ -38,11 +38,11 @@
|
|||
#include <mach/pxa-regs.h>
|
||||
#endif
|
||||
|
||||
#define TIMER_FREQ CLOCK_TICK_RATE
|
||||
#define RTC_DEF_DIVIDER 32768 - 1
|
||||
#define RTC_DEF_TRIM 0
|
||||
|
||||
static unsigned long rtc_freq = 1024;
|
||||
static unsigned long timer_freq;
|
||||
static struct rtc_time rtc_alarm;
|
||||
static DEFINE_SPINLOCK(sa1100_rtc_lock);
|
||||
|
||||
|
|
@ -157,7 +157,7 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
|
|||
rtc_update_irq(rtc, rtc_timer1_count, RTC_PF | RTC_IRQF);
|
||||
|
||||
if (rtc_timer1_count == 1)
|
||||
rtc_timer1_count = (rtc_freq * ((1<<30)/(TIMER_FREQ>>2)));
|
||||
rtc_timer1_count = (rtc_freq * ((1 << 30) / (timer_freq >> 2)));
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
|
@ -166,7 +166,7 @@ static int sa1100_rtc_read_callback(struct device *dev, int data)
|
|||
{
|
||||
if (data & RTC_PF) {
|
||||
/* interpolate missed periods and set match for the next */
|
||||
unsigned long period = TIMER_FREQ/rtc_freq;
|
||||
unsigned long period = timer_freq / rtc_freq;
|
||||
unsigned long oscr = OSCR;
|
||||
unsigned long osmr1 = OSMR1;
|
||||
unsigned long missed = (oscr - osmr1)/period;
|
||||
|
|
@ -263,7 +263,7 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
|
|||
return 0;
|
||||
case RTC_PIE_ON:
|
||||
spin_lock_irq(&sa1100_rtc_lock);
|
||||
OSMR1 = TIMER_FREQ/rtc_freq + OSCR;
|
||||
OSMR1 = timer_freq / rtc_freq + OSCR;
|
||||
OIER |= OIER_E1;
|
||||
rtc_timer1_count = 1;
|
||||
spin_unlock_irq(&sa1100_rtc_lock);
|
||||
|
|
@ -271,7 +271,7 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
|
|||
case RTC_IRQP_READ:
|
||||
return put_user(rtc_freq, (unsigned long *)arg);
|
||||
case RTC_IRQP_SET:
|
||||
if (arg < 1 || arg > TIMER_FREQ)
|
||||
if (arg < 1 || arg > timer_freq)
|
||||
return -EINVAL;
|
||||
rtc_freq = arg;
|
||||
return 0;
|
||||
|
|
@ -352,6 +352,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
|
|||
{
|
||||
struct rtc_device *rtc;
|
||||
|
||||
timer_freq = get_clock_tick_rate();
|
||||
|
||||
/*
|
||||
* According to the manual we should be able to let RTTR be zero
|
||||
* and then a default diviser for a 32.768KHz clock is used.
|
||||
|
|
|
|||
|
|
@ -1817,6 +1817,11 @@ config FB_PXA
|
|||
|
||||
If unsure, say N.
|
||||
|
||||
config FB_PXA_OVERLAY
|
||||
bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
|
||||
default n
|
||||
depends on FB_PXA && (PXA27x || PXA3xx)
|
||||
|
||||
config FB_PXA_SMARTPANEL
|
||||
bool "PXA Smartpanel LCD support"
|
||||
default n
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load diff
|
|
@ -54,11 +54,55 @@ enum {
|
|||
#define PALETTE_SIZE (256 * 4)
|
||||
#define CMD_BUFF_SIZE (1024 * 50)
|
||||
|
||||
/* NOTE: the palette and frame dma descriptors are doubled to allow
|
||||
* the 2nd set for branch settings (FBRx)
|
||||
*/
|
||||
struct pxafb_dma_buff {
|
||||
unsigned char palette[PAL_MAX * PALETTE_SIZE];
|
||||
uint16_t cmd_buff[CMD_BUFF_SIZE];
|
||||
struct pxafb_dma_descriptor pal_desc[PAL_MAX];
|
||||
struct pxafb_dma_descriptor dma_desc[DMA_MAX];
|
||||
struct pxafb_dma_descriptor pal_desc[PAL_MAX * 2];
|
||||
struct pxafb_dma_descriptor dma_desc[DMA_MAX * 2];
|
||||
};
|
||||
|
||||
enum {
|
||||
OVERLAY1,
|
||||
OVERLAY2,
|
||||
};
|
||||
|
||||
enum {
|
||||
OVERLAY_FORMAT_RGB = 0,
|
||||
OVERLAY_FORMAT_YUV444_PACKED,
|
||||
OVERLAY_FORMAT_YUV444_PLANAR,
|
||||
OVERLAY_FORMAT_YUV422_PLANAR,
|
||||
OVERLAY_FORMAT_YUV420_PLANAR,
|
||||
};
|
||||
|
||||
#define NONSTD_TO_XPOS(x) (((x) >> 0) & 0x3ff)
|
||||
#define NONSTD_TO_YPOS(x) (((x) >> 10) & 0x3ff)
|
||||
#define NONSTD_TO_PFOR(x) (((x) >> 20) & 0x7)
|
||||
|
||||
struct pxafb_layer;
|
||||
|
||||
struct pxafb_layer_ops {
|
||||
void (*enable)(struct pxafb_layer *);
|
||||
void (*disable)(struct pxafb_layer *);
|
||||
void (*setup)(struct pxafb_layer *);
|
||||
};
|
||||
|
||||
struct pxafb_layer {
|
||||
struct fb_info fb;
|
||||
int id;
|
||||
atomic_t usage;
|
||||
uint32_t control[2];
|
||||
|
||||
struct pxafb_layer_ops *ops;
|
||||
|
||||
void __iomem *video_mem;
|
||||
unsigned long video_mem_phys;
|
||||
size_t video_mem_size;
|
||||
struct completion branch_done;
|
||||
|
||||
struct pxafb_info *fbi;
|
||||
};
|
||||
|
||||
struct pxafb_info {
|
||||
|
|
@ -69,24 +113,15 @@ struct pxafb_info {
|
|||
void __iomem *mmio_base;
|
||||
|
||||
struct pxafb_dma_buff *dma_buff;
|
||||
size_t dma_buff_size;
|
||||
dma_addr_t dma_buff_phys;
|
||||
dma_addr_t fdadr[DMA_MAX];
|
||||
dma_addr_t fdadr[DMA_MAX * 2];
|
||||
|
||||
/*
|
||||
* These are the addresses we mapped
|
||||
* the framebuffer memory region to.
|
||||
*/
|
||||
/* raw memory addresses */
|
||||
dma_addr_t map_dma; /* physical */
|
||||
u_char * map_cpu; /* virtual */
|
||||
u_int map_size;
|
||||
|
||||
/* addresses of pieces placed in raw buffer */
|
||||
u_char * screen_cpu; /* virtual address of frame buffer */
|
||||
dma_addr_t screen_dma; /* physical address of frame buffer */
|
||||
void __iomem *video_mem; /* virtual address of frame buffer */
|
||||
unsigned long video_mem_phys; /* physical address of frame buffer */
|
||||
size_t video_mem_size; /* size of the frame buffer */
|
||||
u16 * palette_cpu; /* virtual address of palette memory */
|
||||
u_int palette_size;
|
||||
ssize_t video_offset;
|
||||
|
||||
u_int lccr0;
|
||||
u_int lccr3;
|
||||
|
|
@ -120,6 +155,10 @@ struct pxafb_info {
|
|||
struct task_struct *smart_thread;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_FB_PXA_OVERLAY
|
||||
struct pxafb_layer overlay[2];
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CPU_FREQ
|
||||
struct notifier_block freq_transition;
|
||||
struct notifier_block freq_policy;
|
||||
|
|
@ -151,4 +190,10 @@ struct pxafb_info {
|
|||
#define MIN_XRES 64
|
||||
#define MIN_YRES 64
|
||||
|
||||
/* maximum X and Y resolutions - note these are limits from the register
|
||||
* bits length instead of the real ones
|
||||
*/
|
||||
#define MAX_XRES 1024
|
||||
#define MAX_YRES 1024
|
||||
|
||||
#endif /* __PXAFB_H__ */
|
||||
|
|
|
|||
|
|
@ -36,8 +36,7 @@
|
|||
#include <mach/reset.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#define OSCR_FREQ CLOCK_TICK_RATE
|
||||
|
||||
static unsigned long oscr_freq;
|
||||
static unsigned long sa1100wdt_users;
|
||||
static int pre_margin;
|
||||
static int boot_status;
|
||||
|
|
@ -124,12 +123,12 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
|
|||
break;
|
||||
}
|
||||
|
||||
pre_margin = OSCR_FREQ * time;
|
||||
pre_margin = oscr_freq * time;
|
||||
OSMR3 = OSCR + pre_margin;
|
||||
/*fall through*/
|
||||
|
||||
case WDIOC_GETTIMEOUT:
|
||||
ret = put_user(pre_margin / OSCR_FREQ, p);
|
||||
ret = put_user(pre_margin / oscr_freq, p);
|
||||
break;
|
||||
}
|
||||
return ret;
|
||||
|
|
@ -156,6 +155,8 @@ static int __init sa1100dog_init(void)
|
|||
{
|
||||
int ret;
|
||||
|
||||
oscr_freq = get_clock_tick_rate();
|
||||
|
||||
/*
|
||||
* Read the reset status, and save it for later. If
|
||||
* we suspend, RCSR will be cleared, and the watchdog
|
||||
|
|
@ -163,7 +164,7 @@ static int __init sa1100dog_init(void)
|
|||
*/
|
||||
boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
|
||||
WDIOF_CARDRESET : 0;
|
||||
pre_margin = OSCR_FREQ * margin;
|
||||
pre_margin = oscr_freq * margin;
|
||||
|
||||
ret = misc_register(&sa1100dog_miscdev);
|
||||
if (ret == 0)
|
||||
|
|
|
|||
Loading…
Reference in a new issue