adulau/aha
1
0
Fork 0
mirror of https://github.com/adulau/aha.git synced 2024-12-27 03:06:10 +00:00
Code Issues Projects Releases Packages Wiki Activity

ltc4215/ltc4245: Discard obsolete detect methods

Browse source 
There is no point in implementing a detect callback for the LTC4215
and LTC4245, as these devices can't be detected. It was there solely
to handle "force" module parameters to instantiate devices, but now
we have a better sysfs interface that can do the same.

So we can get rid of the ugly module parameters and the detect
callbacks. This shrinks the binary module sizes by 36% and 46%,
respectively.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>
This commit is contained in:
Jean Delvare 2009-10-04 22:53:42 +02:00
parent 0314b020c4
commit 2d2a7cff1b
4 changed files with 18 additions and 174 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
Documentation/hwmon/ltc4215
View file

@ -22,12 +22,13 @@ Usage Notes
-----------
This driver does not probe for LTC4215 devices, due to the fact that some
of the possible addresses are unfriendly to probing. You will need to use
the "force" parameter to tell the driver where to find the device.
of the possible addresses are unfriendly to probing. You will have to
instantiate the devices explicitly.
Example: the following will load the driver for an LTC4215 at address 0x44
on I2C bus #0:
$ modprobe ltc4215 force=0,0x44
$ modprobe ltc4215
$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
Sysfs entries

7
Documentation/hwmon/ltc4245
View file

@ -23,12 +23,13 @@ Usage Notes
-----------
This driver does not probe for LTC4245 devices, due to the fact that some
of the possible addresses are unfriendly to probing. You will need to use
the "force" parameter to tell the driver where to find the device.
of the possible addresses are unfriendly to probing. You will have to
instantiate the devices explicitly.
Example: the following will load the driver for an LTC4245 at address 0x23
on I2C bus #1:
$ modprobe ltc4245 force=1,0x23
$ modprobe ltc4245
$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
Sysfs entries

47
drivers/hwmon/ltc4215.c
View file

@ -20,11 +20,6 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_1(ltc4215);
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4215_cmd {
LTC4215_CONTROL = 0x00, /* rw */
@ -246,9 +241,13 @@ static const struct attribute_group ltc4215_group = {
static int ltc4215_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
struct ltc4215_data *data;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
@ -294,56 +293,20 @@ static int ltc4215_remove(struct i2c_client *client)
return 0;
}
static int ltc4215_detect(struct i2c_client *client,
int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
if (kind < 0) { /* probed detection - check the chip type */
s32 v; /* 8 bits from the chip, or -ERRNO */
/*
* Register 0x01 bit b7 is reserved, expect 0
* Register 0x03 bit b6 and b7 are reserved, expect 0
*/
v = i2c_smbus_read_byte_data(client, LTC4215_ALERT);
if (v < 0 || (v & (1 << 7)) != 0)
return -ENODEV;
v = i2c_smbus_read_byte_data(client, LTC4215_FAULT);
if (v < 0 || (v & ((1 << 6) | (1 << 7))) != 0)
return -ENODEV;
}
strlcpy(info->type, "ltc4215", I2C_NAME_SIZE);
dev_info(&adapter->dev, "ltc4215 %s at address 0x%02x\n",
kind < 0 ? "probed" : "forced",
client->addr);
return 0;
}
static const struct i2c_device_id ltc4215_id[] = {
{ "ltc4215", ltc4215 },
{ "ltc4215", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4215_id);
/* This is the driver that will be inserted */
static struct i2c_driver ltc4215_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "ltc4215",
},
.probe = ltc4215_probe,
.remove = ltc4215_remove,
.id_table = ltc4215_id,
.detect = ltc4215_detect,
.address_data = &addr_data,
};
static int __init ltc4215_init(void)

131
drivers/hwmon/ltc4245.c
View file

@ -22,15 +22,6 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
/* Valid addresses are 0x20 - 0x3f
*
* For now, we do not probe, since some of these addresses
* are known to be unfriendly to probing */
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_1(ltc4245);
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4245_cmd {
LTC4245_STATUS = 0x00, /* readonly */
@ -369,9 +360,13 @@ static const struct attribute_group ltc4245_group = {
static int ltc4245_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
struct ltc4245_data *data;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
@ -418,136 +413,20 @@ static int ltc4245_remove(struct i2c_client *client)
return 0;
}
/* Check that some bits in a control register appear at all possible
* locations without changing value
*
* @client: the i2c client to use
* @reg: the register to read
* @bits: the bits to check (0xff checks all bits,
* 0x03 checks only the last two bits)
*
* return -ERRNO if the register read failed
* return -ENODEV if the register value doesn't stay constant at all
* possible addresses
*
* return 0 for success
*/
static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits)
{
int i;
s32 v, voff1, voff2;
/* Read register and check for error */
v = i2c_smbus_read_byte_data(client, reg);
if (v < 0)
return v;
v &= bits;
for (i = 0x00; i < 0xff; i += 0x20) {
voff1 = i2c_smbus_read_byte_data(client, reg + i);
if (voff1 < 0)
return voff1;
voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08);
if (voff2 < 0)
return voff2;
voff1 &= bits;
voff2 &= bits;
if (v != voff1 || v != voff2)
return -ENODEV;
}
return 0;
}
static int ltc4245_detect(struct i2c_client *client,
int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
if (kind < 0) { /* probed detection - check the chip type */
s32 v; /* 8 bits from the chip, or -ERRNO */
/* Chip registers 0x00-0x07 are control registers
* Chip registers 0x10-0x1f are data registers
*
* Address bits b7-b5 are ignored. This makes the chip "repeat"
* in steps of 0x20. Any control registers should appear with
* the same values across all duplicated addresses.
*
* Register 0x02 bit b2 is reserved, expect 0
* Register 0x07 bits b7 to b4 are reserved, expect 0
*
* Registers 0x01, 0x02 are control registers and should not
* change on their own.
*
* Register 0x06 bits b6 and b7 are control bits, and should
* not change on their own.
*
* Register 0x07 bits b3 to b0 are control bits, and should
* not change on their own.
*/
/* read register 0x02 reserved bit, expect 0 */
v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL);
if (v < 0 || (v & 0x04) != 0)
return -ENODEV;
/* read register 0x07 reserved bits, expect 0 */
v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR);
if (v < 0 || (v & 0xf0) != 0)
return -ENODEV;
/* check that the alert register appears at all locations */
if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff))
return -ENODEV;
/* check that the control register appears at all locations */
if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff))
return -ENODEV;
/* check that register 0x06 bits b6 and b7 stay constant */
if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0))
return -ENODEV;
/* check that register 0x07 bits b3-b0 stay constant */
if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f))
return -ENODEV;
}
strlcpy(info->type, "ltc4245", I2C_NAME_SIZE);
dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n",
kind < 0 ? "probed" : "forced",
client->addr);
return 0;
}
static const struct i2c_device_id ltc4245_id[] = {
{ "ltc4245", ltc4245 },
{ "ltc4245", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4245_id);
/* This is the driver that will be inserted */
static struct i2c_driver ltc4245_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "ltc4245",
},
.probe = ltc4245_probe,
.remove = ltc4245_remove,
.id_table = ltc4245_id,
.detect = ltc4245_detect,
.address_data = &addr_data,
};
static int __init ltc4245_init(void)