From 971beb83aeb2a309175682cf5683d64fd4591841 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 7 Dec 2009 14:23:21 +0100 Subject: [PATCH 01/20] Bluetooth: Fix PTR_ERR return of wrong pointer in hidp_setup_hid() Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin Signed-off-by: Marcel Holtmann --- net/bluetooth/hidp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 569750010fd..18e7f5a43dc 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -770,7 +770,7 @@ static int hidp_setup_hid(struct hidp_session *session, hid = hid_allocate_device(); if (IS_ERR(hid)) - return PTR_ERR(session->hid); + return PTR_ERR(hid); session->hid = hid; session->req = req; From 186de9a33803c7ee20d9af75c9049b50e68a3a08 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Tue, 15 Dec 2009 15:56:34 -0200 Subject: [PATCH 02/20] Bluetooth: Fix unset of RemoteBusy flag for L2CAP RemoteBusy flag need to be unset before l2cap_ertm_send(), otherwise l2cap_ertm_send() will return without sending packets because it checks that flag before start sending. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 5129b88c8e5..7db9a1f8f88 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -3435,8 +3435,8 @@ static inline int l2cap_data_channel_sframe(struct sock *sk, u16 rx_control, str (pi->unacked_frames > 0)) __mod_retrans_timer(); - l2cap_ertm_send(sk); pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY; + l2cap_ertm_send(sk); } break; From 186ee8cf0130993dea8ab8867ff1af8a148f9ae6 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Tue, 15 Dec 2009 20:13:27 -0200 Subject: [PATCH 03/20] Bluetooth: Ack L2CAP I-frames before retransmit missing packet Moving the Ack to before l2cap_retransmit_frame() we can avoid the case where txWindow is full and the packet can't be retransmited. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 7db9a1f8f88..fb0f81d99f9 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -3471,9 +3471,9 @@ static inline int l2cap_data_channel_sframe(struct sock *sk, u16 rx_control, str pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY; if (rx_control & L2CAP_CTRL_POLL) { - l2cap_retransmit_frame(sk, tx_seq); pi->expected_ack_seq = tx_seq; l2cap_drop_acked_frames(sk); + l2cap_retransmit_frame(sk, tx_seq); l2cap_ertm_send(sk); if (pi->conn_state & L2CAP_CONN_WAIT_F) { pi->srej_save_reqseq = tx_seq; From b13f5860447a98daf0358a51fbff66154ac0663a Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 15 Dec 2009 11:38:04 +0200 Subject: [PATCH 04/20] Bluetooth: Fix L2CAP locking scheme regression When locking was introduced the error path branch was not taken into account. Error was found in sparse code checking. Kudos to Jani Nikula. Signed-off-by: Andrei Emeltchenko Acked-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index fb0f81d99f9..1120cf14a54 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1212,6 +1212,7 @@ static void l2cap_monitor_timeout(unsigned long arg) bh_lock_sock(sk); if (l2cap_pi(sk)->retry_count >= l2cap_pi(sk)->remote_max_tx) { l2cap_send_disconn_req(l2cap_pi(sk)->conn, sk); + bh_unlock_sock(sk); return; } From 652fd781a52ad6e24b908cd8b83d12699754f253 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 16 Dec 2009 19:23:43 +0100 Subject: [PATCH 05/20] Bluetooth: Prevent ill-timed autosuspend in USB driver The device must be marked busy as it receives data. Signed-off-by: Oliver Neukum Tested-by: Matthew Garrett Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4d290599675..a699f09ddf7 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -307,6 +307,7 @@ static void btusb_bulk_complete(struct urb *urb) return; usb_anchor_urb(urb, &data->bulk_anchor); + usb_mark_last_busy(data->udev); err = usb_submit_urb(urb, GFP_ATOMIC); if (err < 0) { From 9c69fabe789b0eb468a0c7031ae7bb850760aea8 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 18 Dec 2009 20:11:03 -0800 Subject: [PATCH 06/20] netns: fix net.ipv6.route.gc_min_interval_ms in netns sysctl table was copied, all right, but ->data for net.ipv6.route.gc_min_interval_ms was not reinitialized for "!= &init_net" case. In init_net everthing works by accident due to correct ->data initialization in source table. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/ipv6/route.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index db3b2730389..c2bd74c5f8d 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2630,6 +2630,7 @@ struct ctl_table *ipv6_route_sysctl_init(struct net *net) table[6].data = &net->ipv6.sysctl.ip6_rt_gc_elasticity; table[7].data = &net->ipv6.sysctl.ip6_rt_mtu_expires; table[8].data = &net->ipv6.sysctl.ip6_rt_min_advmss; + table[9].data = &net->ipv6.sysctl.ip6_rt_gc_min_interval; } return table; From afdafff130142ef4d6478dcff6d9e879394fd348 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 18 Dec 2009 20:13:35 -0800 Subject: [PATCH 07/20] netxen: use module parameter correctly Netxen driver is doing this bogus thing to create a control file. This fails if device doesn't exist, and overall is a bad way to do the module parameter. Rather than fix borked code, just rewrite. Just using a writeable module parameter of 0/1 is the correct way Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_main.c | 57 ++-------------------------- 1 file changed, 3 insertions(+), 54 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index f4996846a23..6cae26a5bd6 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -57,7 +57,9 @@ static int use_msi = 1; static int use_msi_x = 1; -static unsigned long auto_fw_reset = AUTO_FW_RESET_ENABLED; +static int auto_fw_reset = AUTO_FW_RESET_ENABLED; +module_param(auto_fw_reset, int, 0644); +MODULE_PARM_DESC(auto_fw_reset,"Auto firmware reset (0=disabled, 1=enabled"); static int __devinit netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); @@ -2534,42 +2536,6 @@ static struct bin_attribute bin_attr_mem = { .write = netxen_sysfs_write_mem, }; -#ifdef CONFIG_MODULES -static ssize_t -netxen_store_auto_fw_reset(struct module_attribute *mattr, - struct module *mod, const char *buf, size_t count) - -{ - unsigned long new; - - if (strict_strtoul(buf, 16, &new)) - return -EINVAL; - - if ((new == AUTO_FW_RESET_ENABLED) || (new == AUTO_FW_RESET_DISABLED)) { - auto_fw_reset = new; - return count; - } - - return -EINVAL; -} - -static ssize_t -netxen_show_auto_fw_reset(struct module_attribute *mattr, - struct module *mod, char *buf) - -{ - if (auto_fw_reset == AUTO_FW_RESET_ENABLED) - return sprintf(buf, "enabled\n"); - else - return sprintf(buf, "disabled\n"); -} - -static struct module_attribute mod_attr_fw_reset = { - .attr = {.name = "auto_fw_reset", .mode = (S_IRUGO | S_IWUSR)}, - .show = netxen_show_auto_fw_reset, - .store = netxen_store_auto_fw_reset, -}; -#endif static void netxen_create_sysfs_entries(struct netxen_adapter *adapter) @@ -2775,23 +2741,12 @@ static struct pci_driver netxen_driver = { static int __init netxen_init_module(void) { -#ifdef CONFIG_MODULES - struct module *mod = THIS_MODULE; -#endif - printk(KERN_INFO "%s\n", netxen_nic_driver_string); #ifdef CONFIG_INET register_netdevice_notifier(&netxen_netdev_cb); register_inetaddr_notifier(&netxen_inetaddr_cb); #endif - -#ifdef CONFIG_MODULES - if (sysfs_create_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr)) - printk(KERN_ERR "%s: Failed to create auto_fw_reset " - "sysfs entry.", netxen_nic_driver_name); -#endif - return pci_register_driver(&netxen_driver); } @@ -2799,12 +2754,6 @@ module_init(netxen_init_module); static void __exit netxen_exit_module(void) { -#ifdef CONFIG_MODULES - struct module *mod = THIS_MODULE; - - sysfs_remove_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr); -#endif - pci_unregister_driver(&netxen_driver); #ifdef CONFIG_INET From db94ce90d3d571c11637a912cc39cfb80df3879c Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 18 Dec 2009 20:14:59 -0800 Subject: [PATCH 08/20] e1000e: LED settings in EEPROM ignored on 82571 and 82572 Do not override the customizable LED configuration set in the EEPROM. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/82571.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index c1a42cfc80b..b979464091b 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1290,7 +1290,6 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw) static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) { u32 ctrl; - u32 led_ctrl; s32 ret_val; ctrl = er32(CTRL); @@ -1305,11 +1304,6 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) break; case e1000_phy_igp_2: ret_val = e1000e_copper_link_setup_igp(hw); - /* Setup activity LED */ - led_ctrl = er32(LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - ew32(LEDCTL, led_ctrl); break; default: return -E1000_ERR_PHY; From 5ee6f6a17cfde9c3141e4d57cf88b5cdf638b463 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Dec 2009 20:16:10 -0800 Subject: [PATCH 09/20] broadcom: bcm54xx_shadow_read() errors ignored in bcm54xx_adjust_rxrefclk() If not signed read errors are ignored. Signed-off-by: Roel Kluin Acked-by: Matt Carlson Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index f63c96a4ecb..c13cf64095b 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -326,7 +326,8 @@ error: static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) { - u32 val, orig; + u32 orig; + int val; bool clk125en = true; /* Abort if we are using an untested phy. */ From 70abc8cb90e679d8519721e2761d8366a18212a6 Mon Sep 17 00:00:00 2001 From: Roger Oksanen Date: Fri, 18 Dec 2009 20:18:21 -0800 Subject: [PATCH 10/20] e100: Fix broken cbs accounting due to missing memset. Alan Stern noticed that e100 caused slab corruption. commit 98468efddb101f8a29af974101c17ba513b07be1 changed the allocation of cbs to use dma pools that don't return zeroed memory, especially the cb->status field used to track which cb to clean, causing (the visible) double freeing of skbs and a wrong free cbs count. Now the cbs are explicitly zeroed at allocation time. Reported-by: Alan Stern Tested-by: Alan Stern Signed-off-by: Roger Oksanen Acked-by: Jesse Brandeburg Signed-off-by: David S. Miller --- drivers/net/e100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 929701ca07d..839fb2b136d 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1829,6 +1829,7 @@ static int e100_alloc_cbs(struct nic *nic) &nic->cbs_dma_addr); if (!nic->cbs) return -ENOMEM; + memset(nic->cbs, 0, count * sizeof(struct cb)); for (cb = nic->cbs, i = 0; i < count; cb++, i++) { cb->next = (i + 1 < count) ? cb + 1 : nic->cbs; @@ -1837,7 +1838,6 @@ static int e100_alloc_cbs(struct nic *nic) cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb); cb->link = cpu_to_le32(nic->cbs_dma_addr + ((i+1) % count) * sizeof(struct cb)); - cb->skb = NULL; } nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs; From f9c4171e01f6befdf5d15346070b819d341c9c73 Mon Sep 17 00:00:00 2001 From: Nageswari Srinivasan Date: Fri, 18 Dec 2009 20:21:21 -0800 Subject: [PATCH 11/20] TI DaVinci EMAC: Fix MDIO bus frequency configuration There was a typo in "if condition" checking for validity of MDIO bus frequency passed as part of platform data. Bitwise AND was being used instead of a Logical AND. Tested on: DM6467 EVM Signed-off-by: Nageswari Srinivasan Acked-by: Anant Gole Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 8edac8915ea..34e03104c3c 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2272,7 +2272,7 @@ static int emac_mii_reset(struct mii_bus *bus) unsigned int clk_div; int mdio_bus_freq = emac_bus_frequency; - if (mdio_max_freq & mdio_bus_freq) + if (mdio_max_freq && mdio_bus_freq) clk_div = ((mdio_bus_freq / mdio_max_freq) - 1); else clk_div = 0xFF; From 3705e11a21bcdffe7422ee7870e1b23fe4ac70f4 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Fri, 18 Dec 2009 20:25:13 -0800 Subject: [PATCH 12/20] ipv6: fix an oops when force unload ipv6 module When I do an ipv6 module force unload,I got the following oops: #rmmod -f ipv6 ------------[ cut here ]------------ kernel BUG at mm/slub.c:2969! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/net/eth2/ifindex Modules linked in: ipv6(-) dm_multipath uinput ppdev tpm_tis tpm tpm_bios pcspkr pcnet32 mii parport_pc i2c_piix4 parport i2c_core floppy mptspi mptscsih mptbase scsi_transport_spi Pid: 2530, comm: rmmod Tainted: G R 2.6.32 #2 440BX Desktop Reference Platform/VMware Virtual Platform EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at kfree+0x6a/0xdd EAX: 00000000 EBX: c09e86bc ECX: c043e4dd EDX: c14293e0 ESI: e141f1d8 EDI: e140fc31 EBP: dec58ef0 ESP: dec58ed0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process rmmod (pid: 2530, ti=dec58000 task=decb1940 task.ti=dec58000) Stack: c14293e0 00000282 df624240 c0897d08 c09e86bc c09e86bc e141f1d8 dec58f1c <0> dec58f00 e140fc31 c09e84c4 e141f1bc dec58f14 c0689d21 dec58f1c e141f1bc <0> 00000000 dec58f2c c0689eff c09e84d8 c09e84d8 e141f1bc bff33a90 dec58f38 Call Trace: [] ? ipv6_frags_exit_net+0x22/0x32 [ipv6] [] ? ops_exit_list+0x19/0x3d [] ? unregister_pernet_operations+0x2a/0x51 [] ? unregister_pernet_subsys+0x17/0x24 [] ? ipv6_frag_exit+0x21/0x32 [ipv6] [] ? inet6_exit+0x47/0x122 [ipv6] [] ? sys_delete_module+0x198/0x1f6 [] ? remove_vma+0x57/0x5d [] ? do_page_fault+0x2e7/0x315 [] ? sysenter_do_call+0x12/0x28 Code: 86 00 00 00 40 c1 e8 0c c1 e0 05 01 d0 89 45 e0 66 83 38 00 79 06 8b 40 0c 89 45 e0 8b 55 e0 8b 02 84 c0 78 14 66 a9 00 c0 75 04 <0f> 0b eb fe 8b 45 e0 e8 35 15 fe ff eb 5d 8b 45 04 8b 55 e0 89 EIP: [] kfree+0x6a/0xdd SS:ESP 0068:dec58ed0 ---[ end trace 4475d1a5b0afa7e5 ]--- It's because in ip6_frags_ns_sysctl_register, "table" only alloced when "net" is not equals to "init_net".So when we free "table" in ip6_frags_ns_sysctl_unregister,we should check this first. This patch fix the problem. Signed-off-by: Yang Hongyang Signed-off-by: David S. Miller --- net/ipv6/reassembly.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index 3b3a9560712..2cddea3bd6b 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -708,7 +708,8 @@ static void ip6_frags_ns_sysctl_unregister(struct net *net) table = net->ipv6.sysctl.frags_hdr->ctl_table_arg; unregister_net_sysctl_table(net->ipv6.sysctl.frags_hdr); - kfree(table); + if (!net_eq(net, &init_net)) + kfree(table); } static struct ctl_table_header *ip6_ctl_header; From 4529819c45161e4a119134f56ef504e69420bc98 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 18 Dec 2009 20:29:04 -0800 Subject: [PATCH 13/20] bnx2: reset_task is crashing the kernel. Fixing it. If bnx2 schedules a reset via the reset_task, e.g., due to a TX timeout, it's possible for the NIC to be disabled with packets pending for transmit. In this case, napi_disable will loop forever, eventually crashing the kernel. This patch moves the disable of the device to after the napi_disable call. Signed-off-by: Breno Leitao Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4bfc8081292..c3e2b279fca 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -653,7 +653,6 @@ static void bnx2_netif_stop(struct bnx2 *bp) { bnx2_cnic_stop(bp); - bnx2_disable_int_sync(bp); if (netif_running(bp->dev)) { bnx2_napi_disable(bp); netif_tx_disable(bp->dev); @@ -672,6 +671,7 @@ bnx2_netif_start(struct bnx2 *bp) bnx2_cnic_start(bp); } } + bnx2_disable_int_sync(bp); } static void From 01a1e7ec6c3769dc7c5fde23ebc253c6be5f68eb Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 18 Dec 2009 20:30:11 -0800 Subject: [PATCH 14/20] mISDN: use DECLARE_COMPLETION_ONSTACK for non-constant completion The _ONSTACK variant should be used for on-stack completion, otherwise it will break lockdep. Signed-off-by: Yong Zhang Acked-by: Karsten Keil Signed-off-by: David S. Miller --- drivers/isdn/mISDN/l1oip_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index 7e5f30dbc0a..f1e8af54dff 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -661,7 +661,7 @@ l1oip_socket_thread(void *data) size_t recvbuf_size = 1500; int recvlen; struct socket *socket = NULL; - DECLARE_COMPLETION(wait); + DECLARE_COMPLETION_ONSTACK(wait); /* allocate buffer memory */ recvbuf = kmalloc(recvbuf_size, GFP_KERNEL); From 4773a47d8a564633cd80b94df397e91e946893e2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 18 Dec 2009 20:31:56 -0800 Subject: [PATCH 15/20] can/at91: don't check platform_get_irq's return value against zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/at91_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index d0ec17878ff..166cc7e579c 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -1037,7 +1037,7 @@ static int __init at91_can_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || irq <= 0) { err = -ENODEV; goto exit_put; } From e6bf95ffa8d6f8f4b7ee33ea01490d95b0bbeb6e Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 18 Dec 2009 20:35:34 -0800 Subject: [PATCH 16/20] bnx2: fixing a timout error due not refreshing TX timers correctly When running the following script on an active bnx2 interface: while(true); do ifconfig ethX mtu 9000; ifconfig ethX mtu 1500; done A timeout error appears and dumps the following stack: NETDEV WATCHDOG: eth4 (bnx2): transmit queue 0 timed out ------------[ cut here ]------------ Badness at net/sched/sch_generic.c:261 This patch just fixes the way that ->trans_start is refreshed. Signed-off-by: Breno Leitao Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index c3e2b279fca..f38764ec02c 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -654,9 +654,17 @@ bnx2_netif_stop(struct bnx2 *bp) { bnx2_cnic_stop(bp); if (netif_running(bp->dev)) { + int i; + bnx2_napi_disable(bp); netif_tx_disable(bp->dev); - bp->dev->trans_start = jiffies; /* prevent tx timeout */ + /* prevent tx timeout */ + for (i = 0; i < bp->dev->num_tx_queues; i++) { + struct netdev_queue *txq; + + txq = netdev_get_tx_queue(bp->dev, i); + txq->trans_start = jiffies; + } } } From 1ccb8389f26f2d513b06abe45d8e0b8f32458302 Mon Sep 17 00:00:00 2001 From: Sandeep Gopalpet Date: Wed, 16 Dec 2009 01:14:58 +0000 Subject: [PATCH 17/20] gianfar: Fix a filer bug We need to enable filer whenever we need to use multiple RX queues. Also, need to program RIR0 register with the required distribution we require, if using RX filer hashing support for packet distribution to multiple queues. Signed-off-by: Sandeep Gopalpet Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 8 +++++++- drivers/net/gianfar.h | 4 ++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 6850dc0a7b9..1616531a71f 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -357,8 +357,11 @@ static void gfar_init_mac(struct net_device *ndev) /* Configure the coalescing support */ gfar_configure_coalescing(priv, 0xFF, 0xFF); - if (priv->rx_filer_enable) + if (priv->rx_filer_enable) { rctrl |= RCTRL_FILREN; + /* Program the RIR0 reg with the required distribution */ + gfar_write(®s->rir0, DEFAULT_RIR0); + } if (priv->rx_csum_enable) rctrl |= RCTRL_CHECKSUMMING; @@ -1022,6 +1025,9 @@ static int gfar_probe(struct of_device *ofdev, priv->rx_queue[i]->rxic = DEFAULT_RXIC; } + /* enable filer if using multiple RX queues*/ + if(priv->num_rx_queues > 1) + priv->rx_filer_enable = 1; /* Enable most messages by default */ priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index cbb451011cb..68d16dc6e7c 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -401,6 +401,10 @@ extern const char gfar_driver_version[]; #define FPR_FILER_MASK 0xFFFFFFFF #define MAX_FILER_IDX 0xFF +/* This default RIR value directly corresponds + * to the 3-bit hash value generated */ +#define DEFAULT_RIR0 0x05397700 + /* RQFCR register bits */ #define RQFCR_GPI 0x80000000 #define RQFCR_HASHTBL_Q 0x00000000 From a7f38041b8c38d0721b042c123bd5d6bd2d21feb Mon Sep 17 00:00:00 2001 From: Sandeep Gopalpet Date: Wed, 16 Dec 2009 01:15:07 +0000 Subject: [PATCH 18/20] gianfar: Fix stats support This patch updates the per rx/tx queue stats. To update the per rx queue stats a new structure has been introduced rx_q_stats. The per tx queue stats are updated via the netdev_queue structure itself. Note that we update only the tx_packtes, tx_bytes, rx_packets, rx_bytes and rx_dropped stats on a per queue basis. Signed-off-by: Sandeep Gopalpet Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 42 ++++++++++++++++++++++++++++++++++++------ drivers/net/gianfar.h | 10 ++++++++++ 2 files changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 1616531a71f..e0620d08464 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -417,6 +417,36 @@ static void gfar_init_mac(struct net_device *ndev) gfar_write(®s->fifo_tx_starve_shutoff, priv->fifo_starve_off); } +static struct net_device_stats *gfar_get_stats(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + struct netdev_queue *txq; + unsigned long rx_packets = 0, rx_bytes = 0, rx_dropped = 0; + unsigned long tx_packets = 0, tx_bytes = 0; + int i = 0; + + for (i = 0; i < priv->num_rx_queues; i++) { + rx_packets += priv->rx_queue[i]->stats.rx_packets; + rx_bytes += priv->rx_queue[i]->stats.rx_bytes; + rx_dropped += priv->rx_queue[i]->stats.rx_dropped; + } + + dev->stats.rx_packets = rx_packets; + dev->stats.rx_bytes = rx_bytes; + dev->stats.rx_dropped = rx_dropped; + + for (i = 0; i < priv->num_tx_queues; i++) { + txq = netdev_get_tx_queue(dev, i); + tx_bytes += txq->tx_bytes; + tx_packets += txq->tx_packets; + } + + dev->stats.tx_bytes = tx_bytes; + dev->stats.tx_packets = tx_packets; + + return &dev->stats; +} + static const struct net_device_ops gfar_netdev_ops = { .ndo_open = gfar_enet_open, .ndo_start_xmit = gfar_start_xmit, @@ -426,6 +456,7 @@ static const struct net_device_ops gfar_netdev_ops = { .ndo_tx_timeout = gfar_timeout, .ndo_do_ioctl = gfar_ioctl, .ndo_select_queue = gfar_select_queue, + .ndo_get_stats = gfar_get_stats, .ndo_vlan_rx_register = gfar_vlan_rx_register, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, @@ -1943,7 +1974,8 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) } /* Update transmit stats */ - dev->stats.tx_bytes += skb->len; + txq->tx_bytes += skb->len; + txq->tx_packets ++; txbdp = txbdp_start = tx_queue->cur_tx; @@ -2301,8 +2333,6 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue) tx_queue->skb_dirtytx = skb_dirtytx; tx_queue->dirty_tx = bdp; - dev->stats.tx_packets += howmany; - return howmany; } @@ -2516,14 +2546,14 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) } } else { /* Increment the number of packets */ - dev->stats.rx_packets++; + rx_queue->stats.rx_packets++; howmany++; if (likely(skb)) { pkt_len = bdp->length - ETH_FCS_LEN; /* Remove the FCS from the packet length */ skb_put(skb, pkt_len); - dev->stats.rx_bytes += pkt_len; + rx_queue->stats.rx_bytes += pkt_len; gfar_process_frame(dev, skb, amount_pull); @@ -2531,7 +2561,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit) if (netif_msg_rx_err(priv)) printk(KERN_WARNING "%s: Missing skb!\n", dev->name); - dev->stats.rx_dropped++; + rx_queue->stats.rx_dropped++; priv->extra_stats.rx_skbmissing++; } diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 68d16dc6e7c..4943cbe642a 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -940,6 +940,15 @@ struct gfar_priv_tx_q { unsigned short txtime; }; +/* + * Per RX queue stats + */ +struct rx_q_stats { + unsigned long rx_packets; + unsigned long rx_bytes; + unsigned long rx_dropped; +}; + /** * struct gfar_priv_rx_q - per rx queue structure * @rxlock: per queue rx spin lock @@ -962,6 +971,7 @@ struct gfar_priv_rx_q { struct rxbd8 *cur_rx; struct net_device *dev; struct gfar_priv_grp *grp; + struct rx_q_stats stats; u16 skb_currx; u16 qindex; unsigned int rx_ring_size; From 7c65ec7958f4f301d5d2ff50476a21e7735c73e8 Mon Sep 17 00:00:00 2001 From: Sandeep Gopalpet Date: Wed, 16 Dec 2009 01:15:17 +0000 Subject: [PATCH 19/20] gianfar: Fix bit definitions of IMASK_GRSC and IMASK_GTSC Signed-off-by: Sandeep Gopalpet Signed-off-by: David S. Miller --- drivers/net/gianfar.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 4943cbe642a..3d72dc43dca 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -333,7 +333,7 @@ extern const char gfar_driver_version[]; #define IMASK_BSY 0x20000000 #define IMASK_EBERR 0x10000000 #define IMASK_MSRO 0x04000000 -#define IMASK_GRSC 0x02000000 +#define IMASK_GTSC 0x02000000 #define IMASK_BABT 0x01000000 #define IMASK_TXC 0x00800000 #define IMASK_TXEEN 0x00400000 @@ -344,7 +344,7 @@ extern const char gfar_driver_version[]; #define IMASK_XFUN 0x00010000 #define IMASK_RXB0 0x00008000 #define IMASK_MAG 0x00000800 -#define IMASK_GTSC 0x00000100 +#define IMASK_GRSC 0x00000100 #define IMASK_RXFEN0 0x00000080 #define IMASK_FIR 0x00000008 #define IMASK_FIQ 0x00000004 From b74665606962456af7f92b1e448cee30ce70967b Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 20 Dec 2009 18:40:18 -0800 Subject: [PATCH 20/20] bnx2: Fix bnx2_netif_stop() merge error. The error was introduced while merging: commit 4529819c45161e4a119134f56ef504e69420bc98 bnx2: reset_task is crashing the kernel. Fixing it. Signed-off-by: Michael Chan k Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index f38764ec02c..65df1de447e 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -666,6 +666,7 @@ bnx2_netif_stop(struct bnx2 *bp) txq->trans_start = jiffies; } } + bnx2_disable_int_sync(bp); } static void @@ -679,7 +680,6 @@ bnx2_netif_start(struct bnx2 *bp) bnx2_cnic_start(bp); } } - bnx2_disable_int_sync(bp); } static void