Merge commit 'kumar/next' into merge

Documentation/powerpc/dts-bindings/fsl/mpic.txt

@@ -0,0 +1,42 @@
+* OpenPIC and its interrupt numbers on Freescale's e500/e600 cores
+
+The OpenPIC specification does not specify which interrupt source has to
+become which interrupt number. This is up to the software implementation
+of the interrupt controller. The only requirement is that every
+interrupt source has to have an unique interrupt number / vector number.
+To accomplish this the current implementation assigns the number zero to
+the first source, the number one to the second source and so on until
+all interrupt sources have their unique number.
+Usually the assigned vector number equals the interrupt number mentioned
+in the documentation for a given core / CPU. This is however not true
+for the e500 cores (MPC85XX CPUs) where the documentation distinguishes
+between internal and external interrupt sources and starts counting at
+zero for both of them.
+
+So what to write for external interrupt source X or internal interrupt
+source Y into the device tree? Here is an example:
+
+The memory map for the interrupt controller in the MPC8544[0] shows,
+that the first interrupt source starts at 0x5_0000 (PIC Register Address
+Map-Interrupt Source Configuration Registers). This source becomes the
+number zero therefore:
+ External interrupt 0 = interrupt number 0
+ External interrupt 1 = interrupt number 1
+ External interrupt 2 = interrupt number 2
+ ...
+Every interrupt number allocates 0x20 bytes register space. So to get
+its number it is sufficient to shift the lower 16bits to right by five.
+So for the external interrupt 10 we have:
+  0x0140 >> 5 = 10
+
+After the external sources, the internal sources follow. The in core I2C
+controller on the MPC8544 for instance has the internal source number
+27. Oo obtain its interrupt number we take the lower 16bits of its memory
+address (0x5_0560) and shift it right:
+ 0x0560 >> 5 = 43
+
+Therefore the I2C device node for the MPC8544 CPU has to have the
+interrupt number 43 specified in the device tree.
+
+[0] MPC8544E PowerQUICCTM III, Integrated Host Processor Family Reference Manual
+    MPC8544ERM Rev. 1 10/2007

arch/powerpc/boot/dts/mpc8315erdb.dts

@@ -204,6 +204,7 @@
 			interrupt-parent = <&ipic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = < &phy0 >;
+			fsl,magic-packet;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -246,6 +247,7 @@
 			interrupt-parent = <&ipic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = < &phy1 >;
+			fsl,magic-packet;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -309,6 +311,22 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <133333333>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 8 79 8 85 8 73 8>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <133333333>;
+		};
+
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
@@ -337,6 +355,15 @@
 				      0x59 0x8>;
 			interrupt-parent = < &ipic >;
 		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
+				     "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 8>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+		};
 	};
 
 	pci0: pci@e0008500 {

arch/powerpc/boot/dts/mpc8349emitx.dts

@@ -63,6 +63,24 @@
 			reg = <0x200 0x100>;
 		};
 
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -72,6 +90,12 @@
 			interrupts = <14 0x8>;
 			interrupt-parent = <&ipic>;
 			dfsrr;
+
+			eeprom: at24@50 {
+				compatible = "st-micro,24c256";
+				reg = <0x50>;
+			};
+
 		};
 
 		i2c@3100 {
@@ -91,6 +115,25 @@
 				interrupt-parent = <&ipic>;
 			};
 
+			pcf1: iexp@38 {
+				#gpio-cells = <2>;
+				compatible = "ti,pcf8574a";
+				reg = <0x38>;
+				gpio-controller;
+			};
+
+			pcf2: iexp@39 {
+				#gpio-cells = <2>;
+				compatible = "ti,pcf8574a";
+				reg = <0x39>;
+				gpio-controller;
+			};
+
+			spd: at24@51 {
+				compatible = "at24,spd";
+				reg = <0x51>;
+			};
+
 			mcu_pio: mcu@a {
 				#gpio-cells = <2>;
 				compatible = "fsl,mc9s08qg8-mpc8349emitx",
@@ -275,6 +318,24 @@
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			green {
+				label = "Green";
+				gpios = <&pcf1 0 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&pcf1 1 1>;
+				/* linux,default-trigger = "heartbeat"; */
+				default-state = "on";
+			};
+		};
+
 	};
 
 	pci0: pci@e0008500 {
@@ -331,7 +392,26 @@
 		compatible = "fsl,mpc8349e-localbus",
 			     "fsl,pq2pro-localbus";
 		reg = <0xe0005000 0xd8>;
-		ranges = <0x3 0x0 0xf0000000 0x210>;
+		ranges = <0x0 0x0 0xfe000000 0x1000000	/* flash */
+			  0x1 0x0 0xf8000000 0x20000	/* VSC 7385 */
+			  0x2 0x0 0xf9000000 0x200000	/* exp slot */
+			  0x3 0x0 0xf0000000 0x210>;	/* CF slot */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0x0      0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		flash@0,800000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x800000 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
 
 		pata@3,0 {
 			compatible = "fsl,mpc8349emitx-pata", "ata-generic";

arch/powerpc/include/asm/gpio.h

@@ -38,12 +38,9 @@ static inline int gpio_cansleep(unsigned int gpio)
 	return __gpio_cansleep(gpio);
 }
 
-/*
- * Not implemented, yet.
- */
 static inline int gpio_to_irq(unsigned int gpio)
 {
-	return -ENOSYS;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned int irq)

arch/powerpc/platforms/83xx/suspend.c

@@ -32,6 +32,7 @@
 #define PMCCR1_NEXT_STATE       0x0C /* Next state for power management */
 #define PMCCR1_NEXT_STATE_SHIFT 2
 #define PMCCR1_CURR_STATE       0x03 /* Current state for power management*/
+#define IMMR_SYSCR_OFFSET       0x100
 #define IMMR_RCW_OFFSET         0x900
 #define RCW_PCI_HOST            0x80000000
 
@@ -78,6 +79,22 @@ struct mpc83xx_clock {
 	u32 sccr;
 };
 
+struct mpc83xx_syscr {
+	__be32 sgprl;
+	__be32 sgprh;
+	__be32 spridr;
+	__be32 :32;
+	__be32 spcr;
+	__be32 sicrl;
+	__be32 sicrh;
+};
+
+struct mpc83xx_saved {
+	u32 sicrl;
+	u32 sicrh;
+	u32 sccr;
+};
+
 struct pmc_type {
 	int has_deep_sleep;
 };
@@ -87,6 +104,8 @@ static int has_deep_sleep, deep_sleeping;
 static int pmc_irq;
 static struct mpc83xx_pmc __iomem *pmc_regs;
 static struct mpc83xx_clock __iomem *clock_regs;
+static struct mpc83xx_syscr __iomem *syscr_regs;
+static struct mpc83xx_saved saved_regs;
 static int is_pci_agent, wake_from_pci;
 static phys_addr_t immrbase;
 static int pci_pm_state;
@@ -137,6 +156,20 @@ static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
 	return ret;
 }
 
+static void mpc83xx_suspend_restore_regs(void)
+{
+	out_be32(&syscr_regs->sicrl, saved_regs.sicrl);
+	out_be32(&syscr_regs->sicrh, saved_regs.sicrh);
+	out_be32(&clock_regs->sccr, saved_regs.sccr);
+}
+
+static void mpc83xx_suspend_save_regs(void)
+{
+	saved_regs.sicrl = in_be32(&syscr_regs->sicrl);
+	saved_regs.sicrh = in_be32(&syscr_regs->sicrh);
+	saved_regs.sccr = in_be32(&clock_regs->sccr);
+}
+
 static int mpc83xx_suspend_enter(suspend_state_t state)
 {
 	int ret = -EAGAIN;
@@ -166,6 +199,8 @@ static int mpc83xx_suspend_enter(suspend_state_t state)
 	 */
 
 	if (deep_sleeping) {
+		mpc83xx_suspend_save_regs();
+
 		out_be32(&pmc_regs->mask, PMCER_ALL);
 
 		out_be32(&pmc_regs->config1,
@@ -179,6 +214,8 @@ static int mpc83xx_suspend_enter(suspend_state_t state)
 		         in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
 
 		out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+		mpc83xx_suspend_restore_regs();
 	} else {
 		out_be32(&pmc_regs->mask, PMCER_PMCI);
 
@@ -194,7 +231,7 @@ out:
 	return ret;
 }
 
-static void mpc83xx_suspend_finish(void)
+static void mpc83xx_suspend_end(void)
 {
 	deep_sleeping = 0;
 }
@@ -278,7 +315,7 @@ static struct platform_suspend_ops mpc83xx_suspend_ops = {
 	.valid = mpc83xx_suspend_valid,
 	.begin = mpc83xx_suspend_begin,
 	.enter = mpc83xx_suspend_enter,
-	.finish = mpc83xx_suspend_finish,
+	.end = mpc83xx_suspend_end,
 };
 
 static int pmc_probe(struct of_device *ofdev,
@@ -333,12 +370,23 @@ static int pmc_probe(struct of_device *ofdev,
 		goto out_pmc;
 	}
 
+	if (has_deep_sleep) {
+		syscr_regs = ioremap(immrbase + IMMR_SYSCR_OFFSET,
+				     sizeof(*syscr_regs));
+		if (!syscr_regs) {
+			ret = -ENOMEM;
+			goto out_syscr;
+		}
+	}
+
 	if (is_pci_agent)
 		mpc83xx_set_agent();
 
 	suspend_set_ops(&mpc83xx_suspend_ops);
 	return 0;
 
+out_syscr:
+	iounmap(clock_regs);
 out_pmc:
 	iounmap(pmc_regs);
 out:

arch/powerpc/sysdev/cpm2_pic.c

@@ -143,13 +143,23 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
 	struct irq_desc *desc = irq_to_desc(virq);
 	unsigned int vold, vnew, edibit;
 
-	if (flow_type == IRQ_TYPE_NONE)
-		flow_type = IRQ_TYPE_LEVEL_LOW;
+	/* Port C interrupts are either IRQ_TYPE_EDGE_FALLING or
+	 * IRQ_TYPE_EDGE_BOTH (default).  All others are IRQ_TYPE_EDGE_FALLING
+	 * or IRQ_TYPE_LEVEL_LOW (default)
+	 */
+	if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) {
+		if (flow_type == IRQ_TYPE_NONE)
+			flow_type = IRQ_TYPE_EDGE_BOTH;
 
-	if (flow_type & IRQ_TYPE_EDGE_RISING) {
-		printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n",
-			flow_type);
-		return -EINVAL;
+		if (flow_type != IRQ_TYPE_EDGE_BOTH &&
+		    flow_type != IRQ_TYPE_EDGE_FALLING)
+			goto err_sense;
+	} else {
+		if (flow_type == IRQ_TYPE_NONE)
+			flow_type = IRQ_TYPE_LEVEL_LOW;
+
+		if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
+			goto err_sense;
 	}
 
 	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
@@ -181,6 +191,10 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
 	if (vold != vnew)
 		out_be32(&cpm2_intctl->ic_siexr, vnew);
 	return 0;
+
+err_sense:
+	pr_err("CPM2 PIC: sense type 0x%x not supported\n", flow_type);
+	return -EINVAL;
 }
 
 static struct irq_chip cpm2_pic = {

arch/powerpc/sysdev/fsl_pci.c

@@ -464,8 +464,7 @@ static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
 {
 	struct pci_controller *hose = pci_bus_to_host(bus);
 	struct mpc83xx_pcie_priv *pcie = hose->dn->data;
-	u8 bus_no = bus->number - hose->first_busno;
-	u32 dev_base = bus_no << 24 | devfn << 16;
+	u32 dev_base = bus->number << 24 | devfn << 16;
 	int ret;
 
 	ret = mpc83xx_pcie_exclude_device(bus, devfn);
@@ -515,12 +514,17 @@ static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
 static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
 				     int offset, int len, u32 val)
 {
+	struct pci_controller *hose = pci_bus_to_host(bus);
 	void __iomem *cfg_addr;
 
 	cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
 	if (!cfg_addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
+	/* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */
+	if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno)
+		val &= 0xffffff00;
+
 	switch (len) {
 	case 1:
 		out_8(cfg_addr, val);

arch/powerpc/sysdev/mpc8xxx_gpio.c

@@ -54,6 +54,22 @@ static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
 	mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
 }
 
+/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
+ * defined as output cannot be determined by reading GPDAT register,
+ * so we use shadow data register instead. The status of input pins
+ * is determined by reading GPDAT register.
+ */
+static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	u32 val;
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+	val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
+
+	return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
+}
+
 static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
@@ -136,7 +152,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
 	gc->ngpio = MPC8XXX_GPIO_PINS;
 	gc->direction_input = mpc8xxx_gpio_dir_in;
 	gc->direction_output = mpc8xxx_gpio_dir_out;
-	gc->get = mpc8xxx_gpio_get;
+	if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
+		gc->get = mpc8572_gpio_get;
+	else
+		gc->get = mpc8xxx_gpio_get;
 	gc->set = mpc8xxx_gpio_set;
 
 	ret = of_mm_gpiochip_add(np, mm_gc);