[ALSA] hda: EAPD power management

Power management support for EAPD enabled laptops, when headphones
are sensed it pulls the EAPD GPIO line low to power it down.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Matthew Ranostay 2008-04-14 13:32:54 +02:00 committed by Takashi Iwai
parent 780c8be4ab
commit 0fc9dec46f

View file

@ -129,6 +129,7 @@ struct sigmatel_spec {
unsigned int hp_detect: 1;
/* gpio lines */
unsigned int eapd_mask;
unsigned int gpio_mask;
unsigned int gpio_dir;
unsigned int gpio_data;
@ -3183,6 +3184,10 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
if (spec->eapd_mask)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data &
~spec->eapd_mask);
} else {
/* enable lineouts, disable hp */
for (i = 0; i < cfg->line_outs; i++)
@ -3191,6 +3196,10 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
if (spec->eapd_mask)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data |
spec->eapd_mask);
}
}
@ -3478,7 +3487,7 @@ again:
spec->num_dmuxes = ARRAY_SIZE(stac92hd73xx_dmux_nids);
spec->dinput_mux = &stac92hd73xx_dmux;
/* GPIO0 High = Enable EAPD */
spec->gpio_mask = spec->gpio_dir = 0x1;
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
spec->gpio_data = 0x01;
switch (spec->board_config) {
@ -3584,7 +3593,10 @@ again:
spec->aloopback_shift = 0;
/* GPIO0 High = EAPD */
spec->gpio_mask = spec->gpio_dir = spec->gpio_data = 0x1;
spec->gpio_mask = 0x01;
spec->gpio_dir = 0x01;
spec->gpio_mask = 0x01;
spec->gpio_data = 0x01;
spec->mux_nids = stac92hd71bxx_mux_nids;
spec->adc_nids = stac92hd71bxx_adc_nids;
@ -3770,7 +3782,7 @@ static int patch_stac927x(struct hda_codec *codec)
case STAC_D965_3ST:
case STAC_D965_5ST:
/* GPIO0 High = Enable EAPD */
spec->gpio_mask = spec->gpio_dir = 0x01;
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x01;
spec->gpio_data = 0x01;
spec->num_dmics = 0;
@ -3794,7 +3806,7 @@ static int patch_stac927x(struct hda_codec *codec)
/* fallthru */
case STAC_DELL_3ST:
/* GPIO2 High = Enable EAPD */
spec->gpio_mask = spec->gpio_dir = 0x04;
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04;
spec->gpio_data = 0x04;
spec->dmic_nids = stac927x_dmic_nids;
spec->num_dmics = STAC927X_NUM_DMICS;
@ -3806,7 +3818,7 @@ static int patch_stac927x(struct hda_codec *codec)
break;
default:
/* GPIO0 High = Enable EAPD */
spec->gpio_mask = spec->gpio_dir = 0x1;
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
spec->gpio_data = 0x01;
spec->num_dmics = 0;
@ -3910,6 +3922,7 @@ static int patch_stac9205(struct hda_codec *codec)
(AC_USRSP_EN | STAC_HP_EVENT));
spec->gpio_dir = 0x0b;
spec->eapd_mask = 0x01;
spec->gpio_mask = 0x1b;
spec->gpio_mute = 0x10;
/* GPIO0 High = EAPD, GPIO1 Low = Headphone Mute,
@ -3919,7 +3932,7 @@ static int patch_stac9205(struct hda_codec *codec)
break;
default:
/* GPIO0 High = EAPD */
spec->gpio_mask = spec->gpio_dir = 0x1;
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
spec->gpio_data = 0x01;
break;
}