Merge branch 'master' of /home/sam/kernel/linux-2.6/

Documentation/DocBook/mtdnand.tmpl

@@ -189,9 +189,9 @@ static unsigned long baseaddr;
 	<sect1>
 		<title>Partition defines</title>
 		<para>
-			If you want to divide your device into parititions, then
-			enable the configuration switch CONFIG_MTD_PARITIONS and define
-			a paritioning scheme suitable to your board.
+			If you want to divide your device into partitions, then
+			enable the configuration switch CONFIG_MTD_PARTITIONS and define
+			a partitioning scheme suitable to your board.
 		</para>
 		<programlisting>
 #define NUM_PARTITIONS 2

Documentation/DocBook/videobook.tmpl

@@ -976,7 +976,7 @@ static int camera_close(struct video_device *dev)
   <title>Interrupt Handling</title>
   <para>
         Our example handler is for an ISA bus device. If it was PCI you would be
-        able to share the interrupt and would have set SA_SHIRQ to indicate a 
+        able to share the interrupt and would have set IRQF_SHARED to indicate a
         shared IRQ. We pass the device pointer as the interrupt routine argument. We
         don't need to since we only support one card but doing this will make it
         easier to upgrade the driver for multiple devices in the future.

Documentation/arm/IXP4xx

@@ -85,7 +85,7 @@ IXP4xx provides two methods of accessing PCI memory space:
 2) If > 64MB of memory space is required, the IXP4xx can be 
    configured to use indirect registers to access PCI This allows 
    for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-   The disadvantadge of this is that every PCI access requires 
+   The disadvantage of this is that every PCI access requires 
    three local register accesses plus a spinlock, but in some 
    cases the performance hit is acceptable. In addition, you cannot 
    mmap() PCI devices in this case due to the indirect nature

Documentation/digiepca.txt

@@ -2,7 +2,7 @@ NOTE:  This driver is obsolete.  Digi provides a 2.6 driver (dgdm) at
 http://www.digi.com for PCI cards.  They no longer maintain this driver,
 and have no 2.6 driver for ISA cards.
 
-This driver requires a number of user-space tools.  They can be aquired from
+This driver requires a number of user-space tools.  They can be acquired from
 http://www.digi.com, but only works with 2.4 kernels.
 
 

Documentation/feature-removal-schedule.txt

@@ -257,3 +257,12 @@ Why:	Code does no longer build since at least 2.6.0,  apparently there is
 Who:	Ralf Baechle <ralf@linux-mips.org>
 
 ---------------------------
+
+What:	Interrupt only SA_* flags
+When:	Januar 2007
+Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
+	out of the signal namespace.
+
+Who:	Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------

Documentation/memory-barriers.txt

@@ -602,7 +602,7 @@ Consider the following sequence of events:
 
 This sequence of events is committed to the memory coherence system in an order
 that the rest of the system might perceive as the unordered set of { STORE A,
-STORE B, STORE C } all occuring before the unordered set of { STORE D, STORE E
+STORE B, STORE C } all occurring before the unordered set of { STORE D, STORE E
 }:
 
 	+-------+       :      :

Documentation/networking/pktgen.txt

@@ -74,7 +74,7 @@ Examples:
  pgset "pkt_size 9014"   sets packet size to 9014
  pgset "frags 5"         packet will consist of 5 fragments
  pgset "count 200000"    sets number of packets to send, set to zero
-                         for continious sends untill explicitl stopped.
+                         for continuous sends until explicitly stopped.
 
  pgset "delay 5000"      adds delay to hard_start_xmit(). nanoseconds
 

Documentation/pci.txt

@@ -225,7 +225,7 @@ Generic flavors of pci_request_region() are request_mem_region()
 Use these for address resources that are not described by "normal" PCI
 interfaces (e.g. BAR).
 
-   All interrupt handlers should be registered with SA_SHIRQ and use the devid
+   All interrupt handlers should be registered with IRQF_SHARED and use the devid
 to map IRQs to devices (remember that all PCI interrupts are shared).
 
 

Documentation/pcmcia/crc32hash.c

@@ -0,0 +1,32 @@
+/* crc32hash.c - derived from linux/lib/crc32.c, GNU GPL v2 */
+/* Usage example:
+$ ./crc32hash "Dual Speed"
+*/
+
+#include <string.h>
+#include <stdio.h>
+#include <ctype.h>
+#include <stdlib.h>
+
+unsigned int crc32(unsigned char const *p, unsigned int len)
+{
+	int i;
+	unsigned int crc = 0;
+	while (len--) {
+		crc ^= *p++;
+		for (i = 0; i < 8; i++)
+			crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
+	}
+	return crc;
+}
+
+int main(int argc, char **argv) {
+	unsigned int result;
+	if (argc != 2) {
+		printf("no string passed as argument\n");
+		return -1;
+	}
+	result = crc32(argv[1], strlen(argv[1]));
+	printf("0x%x\n", result);
+	return 0;
+}

Documentation/pcmcia/devicetable.txt

@@ -27,37 +27,7 @@ pcmcia:m0149cC1ABf06pfn00fn00pa725B842DpbF1EFEE84pc0877B627pd00000000
 The hex value after "pa" is the hash of product ID string 1, after "pb" for
 string 2 and so on.
 
-Alternatively, you can use this small tool to determine the crc32 hash.
-simply pass the string you want to evaluate as argument to this program,
-e.g.
+Alternatively, you can use crc32hash (see Documentation/pcmcia/crc32hash.c)
+to determine the crc32 hash.  Simply pass the string you want to evaluate
+as argument to this program, e.g.:
 $ ./crc32hash "Dual Speed"
-
--------------------------------------------------------------------------
-/* crc32hash.c - derived from linux/lib/crc32.c, GNU GPL v2 */
-#include <string.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-
-unsigned int crc32(unsigned char const *p, unsigned int len)
-{
-	int i;
-	unsigned int crc = 0;
-	while (len--) {
-		crc ^= *p++;
-		for (i = 0; i < 8; i++)
-			crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
-	}
-	return crc;
-}
-
-int main(int argc, char **argv) {
-	unsigned int result;
-	if (argc != 2) {
-		printf("no string passed as argument\n");
-		return -1;
-	}
-	result = crc32(argv[1], strlen(argv[1]));
-	printf("0x%x\n", result);
-	return 0;
-}

Documentation/scsi/tmscsim.txt

@@ -109,7 +109,7 @@ than the 33.33 MHz being in the PCI spec.
 
 If you want to share the IRQ with another device and the driver refuses to
 do so, you might succeed with changing the DC390_IRQ type in tmscsim.c to 
-SA_SHIRQ | SA_INTERRUPT.
+IRQF_SHARED | IRQF_DISABLED.
 
 
 3.Features

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -1149,7 +1149,7 @@
           }
           chip->port = pci_resource_start(pci, 0);
           if (request_irq(pci->irq, snd_mychip_interrupt,
-                          SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
+                          IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
                   printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
                   snd_mychip_free(chip);
                   return -EBUSY;
@@ -1323,7 +1323,7 @@
           <programlisting>
 <![CDATA[
   if (request_irq(pci->irq, snd_mychip_interrupt,
-                  SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
+                  IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
           printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
           snd_mychip_free(chip);
           return -EBUSY;
@@ -1342,7 +1342,7 @@
 
       <para>
       On the PCI bus, the interrupts can be shared. Thus,
-      <constant>SA_SHIRQ</constant> is given as the interrupt flag of
+      <constant>IRQF_SHARED</constant> is given as the interrupt flag of
       <function>request_irq()</function>. 
       </para>
 
@@ -3048,7 +3048,7 @@ struct _snd_pcm_runtime {
         </para>
 
         <para>
-          If you aquire a spinlock in the interrupt handler, and the
+          If you acquire a spinlock in the interrupt handler, and the
         lock is used in other pcm callbacks, too, then you have to
         release the lock before calling
         <function>snd_pcm_period_elapsed()</function>, because

Documentation/video4linux/CARDLIST.cx88

@@ -50,3 +50,4 @@
  49 -> PixelView PlayTV P7000                              [1554:4813]
  50 -> NPG Tech Real TV FM Top 10                          [14f1:0842]
  51 -> WinFast DTV2000 H                                   [107d:665e]
+ 52 -> Geniatech DVB-S                                     [14f1:0084]

MAINTAINERS

@@ -2555,13 +2555,6 @@ M:	thomas@winischhofer.net
 W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 S:	Maintained
 
-SMB FILESYSTEM
-P:	Urban Widmark
-M:	urban@teststation.com
-W:	http://samba.org/
-L:	samba@samba.org
-S:	Maintained
-
 SMC91x ETHERNET DRIVER
 P:	Nicolas Pitre
 M:	nico@cam.org

arch/alpha/kernel/alpha_ksyms.c

@@ -5,7 +5,6 @@
  * modules.
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/user.h>

arch/alpha/kernel/console.c

@@ -5,7 +5,6 @@
  * non-0 I/O hose
  */
 
-#include <linux/config.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/tty.h>

arch/alpha/kernel/entry.S

@@ -4,7 +4,6 @@
  * Kernel entry-points.
  */
 
-#include <linux/config.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/pal.h>

arch/alpha/kernel/gct.c

@@ -2,7 +2,6 @@
  *	linux/arch/alpha/kernel/gct.c
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>

arch/alpha/kernel/head.S

@@ -7,7 +7,6 @@
  * the kernel global pointer and jump to the kernel entry-point.
  */
 
-#include <linux/config.h>
 #include <asm/system.h>
 #include <asm/asm-offsets.h>
 

arch/alpha/kernel/irq.c

@@ -10,7 +10,6 @@
  * should be easier.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
@@ -95,12 +94,12 @@ show_interrupts(struct seq_file *p, void *v)
 #endif
 		seq_printf(p, " %14s", irq_desc[irq].chip->typename);
 		seq_printf(p, "  %c%s",
-			(action->flags & SA_INTERRUPT)?'+':' ',
+			(action->flags & IRQF_DISABLED)?'+':' ',
 			action->name);
 
 		for (action=action->next; action; action = action->next) {
 			seq_printf(p, ", %c%s",
-				  (action->flags & SA_INTERRUPT)?'+':' ',
+				  (action->flags & IRQF_DISABLED)?'+':' ',
 				   action->name);
 		}
 

arch/alpha/kernel/irq_alpha.c

@@ -2,7 +2,6 @@
  * Alpha specific irq code.
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/irq.h>
@@ -215,7 +214,7 @@ static unsigned int rtc_startup(unsigned int irq) { return 0; }
 
 struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= SA_INTERRUPT,
+	.flags		= IRQF_DISABLED,
 	.name		= "timer",
 };
 

arch/alpha/kernel/irq_i8259.c

@@ -7,7 +7,6 @@
  * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c.
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/cache.h>
 #include <linux/sched.h>

arch/alpha/kernel/machvec_impl.h

@@ -6,7 +6,6 @@
  * This file has goodies to help simplify instantiation of machine vectors.
  */
 
-#include <linux/config.h>
 #include <asm/pgalloc.h>
 
 /* Whee.  These systems don't have an HAE:

arch/alpha/kernel/pci.c

@@ -12,7 +12,6 @@
  * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  *	     PCI-PCI bridges cleanup
  */
-#include <linux/config.h>
 #include <linux/string.h>
 #include <linux/pci.h>
 #include <linux/init.h>

arch/alpha/kernel/process.c

@@ -8,7 +8,6 @@
  * This file handles the architecture-dependent parts of process handling.
  */
 
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>

arch/alpha/kernel/proto.h

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <linux/interrupt.h>
 
 

arch/alpha/kernel/smc37c93x.c

@@ -2,7 +2,6 @@
  * SMC 37C93X initialization code
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 
 #include <linux/slab.h>

arch/alpha/kernel/srm_env.c

@@ -57,7 +57,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/proc_fs.h>

arch/alpha/kernel/srmcons.c

@@ -5,7 +5,6 @@
  * (TTY driver and console driver)
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/console.h>

arch/alpha/kernel/sys_alcor.c

@@ -8,7 +8,6 @@
  * Code supporting the ALCOR and XLT (XL-300/366/433).
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_cabriolet.c

@@ -9,7 +9,6 @@
  * PC164 and LX164.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_dp264.c

@@ -12,7 +12,6 @@
  * Code supporting the DP264 (EV6+TSUNAMI).
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_eb64p.c

@@ -8,7 +8,6 @@
  * Code supporting the EB64+ and EB66.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_jensen.c

@@ -74,7 +74,7 @@ jensen_local_startup(unsigned int irq)
 		 * the IPL from being dropped during handler processing.
 		 */
 		if (irq_desc[irq].action)
-			irq_desc[irq].action->flags |= SA_INTERRUPT;
+			irq_desc[irq].action->flags |= IRQF_DISABLED;
 	return 0;
 }
 

arch/alpha/kernel/sys_mikasa.c

@@ -8,7 +8,6 @@
  * Code supporting the MIKASA (AlphaServer 1000).
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_noritake.c

@@ -9,7 +9,6 @@
  * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_sable.c

@@ -8,7 +8,6 @@
  * Code supporting the Sable, Sable-Gamma, and Lynx systems.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_sio.c

@@ -10,7 +10,6 @@
  * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_titan.c

@@ -12,7 +12,6 @@
  *	Granite
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>
@@ -280,15 +279,15 @@ titan_late_init(void)
 	 * all reported to the kernel as machine checks, so the handler
 	 * is a nop so it can be called to count the individual events.
 	 */
-	request_irq(63+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
 		    "CChip Error", NULL);
-	request_irq(62+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 0 H_Error", NULL);
-	request_irq(61+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 1 H_Error", NULL);
-	request_irq(60+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 0 C_Error", NULL);
-	request_irq(59+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 1 C_Error", NULL);
 
 	/* 
@@ -349,9 +348,9 @@ privateer_init_pci(void)
 	 * Hook a couple of extra err interrupts that the
 	 * common titan code won't.
 	 */
-	request_irq(53+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
 		    "NMI", NULL);
-	request_irq(50+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
 		    "Temperature Warning", NULL);
 
 	/*

arch/alpha/kernel/time.c

@@ -27,7 +27,6 @@
  * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
  *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
  */
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>

arch/alpha/kernel/traps.c

@@ -8,7 +8,6 @@
  * This file initializes the trap entry points
  */
 
-#include <linux/config.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/tty.h>

arch/alpha/kernel/vmlinux.lds.S

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <asm-generic/vmlinux.lds.h>
 
 OUTPUT_FORMAT("elf64-alpha")

arch/alpha/lib/callback_srm.S

@@ -2,7 +2,6 @@
  *	arch/alpha/lib/callback_srm.S
  */
 
-#include <linux/config.h>
 #include <asm/console.h>
 
 .text

arch/alpha/lib/udelay.c

@@ -4,7 +4,6 @@
  * Delay routines, using a pre-computed "loops_per_jiffy" value.
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/sched.h> /* for udelay's use of smp_processor_id */
 #include <asm/param.h>

arch/alpha/mm/extable.c

@@ -2,7 +2,6 @@
  * linux/arch/alpha/mm/extable.c
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <asm/uaccess.h>
 

arch/alpha/mm/fault.c

@@ -4,7 +4,6 @@
  *  Copyright (C) 1995  Linus Torvalds
  */
 
-#include <linux/config.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>

arch/alpha/mm/init.c

@@ -6,7 +6,6 @@
 
 /* 2.3.x zone allocator, 1999 Andrea Arcangeli <andrea@suse.de> */
 
-#include <linux/config.h>
 #include <linux/pagemap.h>
 #include <linux/signal.h>
 #include <linux/sched.h>

arch/alpha/mm/numa.c

@@ -6,7 +6,6 @@
  *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>

arch/arm/Kconfig

@@ -47,6 +47,18 @@ config MCA
 	  <file:Documentation/mca.txt> (and especially the web page given
 	  there) before attempting to build an MCA bus kernel.
 
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config HARDIRQS_SW_RESEND
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -121,11 +133,11 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
-config ARCH_AT91RM9200
-	bool "Atmel AT91RM9200"
+config ARCH_AT91
+	bool "Atmel AT91"
 	help
-	  Say Y here if you intend to run this kernel on an Atmel
-	  AT91RM9200-based board.
+	  This enables support for systems based on the Atmel AT91RM9200
+	  and AT91SAM9xxx processors.
 
 config ARCH_CLPS7500
 	bool "Cirrus CL-PS7500FE"
@@ -547,7 +559,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91RM9200
+		   ARCH_AT91RM9200 || MACH_TRIZEPS4
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -678,7 +690,7 @@ config XIP_PHYS_ADDR
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
 
 menu "CPU Frequency scaling"
 

arch/arm/Makefile

@@ -114,7 +114,7 @@ endif
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91)       := at91rm9200
  machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
  machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
  machine-$(CONFIG_ARCH_NETX)       := netx

arch/arm/boot/compressed/head-clps7500.S

@@ -4,7 +4,6 @@
  * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
  */
 
-#include <linux/config.h>
 
 		/* There are three different ways the kernel can be
 		   booted on a 7500 system: from Angel (loaded in RAM), from

arch/arm/boot/compressed/head-l7200.S

@@ -7,7 +7,6 @@
  * is merged with head.S by the linker.
  */
 
-#include <linux/config.h>
 #include <asm/mach-types.h>
 
 #ifndef CONFIG_ARCH_L7200

arch/arm/boot/compressed/head-sa1100.S

@@ -7,7 +7,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 

arch/arm/boot/compressed/head-sharpsl.S

@@ -12,7 +12,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 

arch/arm/boot/compressed/head-xscale.S

@@ -5,7 +5,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 

arch/arm/boot/compressed/head.S

@@ -8,7 +8,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 
 /*
@@ -448,8 +447,11 @@ __common_mmu_cache_on:
 		mov	r1, #-1
 		mcr	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcr	p15, 0, r1, c3, c0, 0	@ load domain access control
-		mcr	p15, 0, r0, c1, c0, 0	@ load control register
-		mov	pc, lr
+		b	1f
+		.align	5			@ cache line aligned
+1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
+		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
+		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
 
 /*
  * All code following this line is relocatable.  It is relocated by

arch/arm/common/gic.c

@@ -33,6 +33,7 @@
 
 static void __iomem *gic_dist_base;
 static void __iomem *gic_cpu_base;
+static DEFINE_SPINLOCK(irq_controller_lock);
 
 /*
  * Routines to acknowledge, disable and enable interrupts
@@ -52,32 +53,45 @@ static void __iomem *gic_cpu_base;
 static void gic_ack_irq(unsigned int irq)
 {
 	u32 mask = 1 << (irq % 32);
+
+	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
 	writel(irq, gic_cpu_base + GIC_CPU_EOI);
+	spin_unlock(&irq_controller_lock);
 }
 
 static void gic_mask_irq(unsigned int irq)
 {
 	u32 mask = 1 << (irq % 32);
+
+	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+	spin_unlock(&irq_controller_lock);
 }
 
 static void gic_unmask_irq(unsigned int irq)
 {
 	u32 mask = 1 << (irq % 32);
+
+	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+	spin_unlock(&irq_controller_lock);
 }
 
 #ifdef CONFIG_SMP
-static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 {
 	void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
 	unsigned int shift = (irq % 4) * 8;
+	unsigned int cpu = first_cpu(mask_val);
 	u32 val;
 
+	spin_lock(&irq_controller_lock);
+	irq_desc[irq].cpu = cpu;
 	val = readl(reg) & ~(0xff << shift);
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
+	spin_unlock(&irq_controller_lock);
 }
 #endif
 
@@ -86,7 +100,7 @@ static struct irqchip gic_chip = {
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
 #ifdef CONFIG_SMP
-	.set_cpu	= gic_set_cpu,
+	.set_affinity	= gic_set_cpu,
 #endif
 };
 

arch/arm/common/locomo.c

@@ -15,7 +15,6 @@
  * Based on sa1111.c
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>

arch/arm/common/sa1111.c

@@ -14,7 +14,6 @@
  * All initialization functions provided here are intended to be called
  * from machine specific code with proper arguments when required.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -151,7 +150,7 @@ static void
 sa1111_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
 {
 	unsigned int stat0, stat1, i;
-	void __iomem *base = desc->data;
+	void __iomem *base = get_irq_data(irq);
 
 	stat0 = sa1111_readl(base + SA1111_INTSTATCLR0);
 	stat1 = sa1111_readl(base + SA1111_INTSTATCLR1);
@@ -169,11 +168,11 @@ sa1111_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
 
 	for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1)
 		if (stat0 & 1)
-			do_edge_IRQ(i, irq_desc + i, regs);
+			handle_edge_irq(i, irq_desc + i, regs);
 
 	for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
 		if (stat1 & 1)
-			do_edge_IRQ(i, irq_desc + i, regs);
+			handle_edge_irq(i, irq_desc + i, regs);
 
 	/* For level-based interrupts */
 	desc->chip->unmask(irq);

arch/arm/common/time-acorn.c

@@ -16,6 +16,7 @@
 #include <linux/timex.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -76,7 +77,7 @@ ioc_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 static struct irqaction ioc_timer_irq = {
 	.name		= "timer",
-	.flags		= SA_INTERRUPT,
+	.flags		= IRQF_DISABLED,
 	.handler	= ioc_timer_interrupt
 };
 

arch/arm/common/uengine.c

@@ -11,7 +11,6 @@
  * License, or (at your option) any later version.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>

arch/arm/common/via82c505.c

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/ptrace.h>

arch/arm/configs/at91rm9200dk_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/at91rm9200ek_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/ateb9200_defconfig

@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/carmeva_defconfig

@@ -82,6 +82,7 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/csb337_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/csb637_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/kafa_defconfig

@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/kb9202_defconfig

@@ -80,6 +80,7 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/omap_h2_1610_defconfig

@@ -1,19 +1,20 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov  9 18:53:40 2005
+# Linux kernel version: 2.6.17
+# Thu Jun 29 15:25:18 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -29,26 +30,26 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -56,7 +57,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
@@ -64,6 +64,7 @@ CONFIG_OBSOLETE_MODPARM=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -81,16 +82,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91RM9200 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -98,11 +109,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # TI OMAP Implementations
@@ -141,6 +147,7 @@ CONFIG_ARCH_OMAP16XX=y
 CONFIG_MACH_OMAP_H2=y
 # CONFIG_MACH_OMAP_H3 is not set
 # CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
 # CONFIG_MACH_OMAP_GENERIC is not set
 
 #
@@ -177,7 +184,6 @@ CONFIG_ARM_THUMB=y
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -189,6 +195,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_PREEMPT=y
 CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -249,6 +257,8 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 
 #
@@ -259,9 +269,12 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -278,12 +291,18 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -295,6 +314,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -312,7 +336,6 @@ CONFIG_TCP_CONG_BIC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -333,6 +356,12 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -526,6 +555,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -534,6 +564,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -559,8 +590,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -572,6 +603,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # TPM devices
 #
+# CONFIG_TCG_TPM is not set
 # CONFIG_TELCLOCK is not set
 
 #
@@ -579,11 +611,23 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -591,13 +635,23 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -607,11 +661,13 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -635,7 +691,6 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_RL is not set
 
 #
 # Logo configuration
@@ -660,16 +715,15 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
@@ -680,23 +734,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
 
 #
 # MMC/SD Card support
 #
 # CONFIG_MMC is not set
 
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
 #
 # File systems
 #
@@ -704,14 +753,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -741,7 +791,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -843,10 +893,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
 # CONFIG_DEBUG_USER is not set
 
 #

arch/arm/configs/onearm_defconfig

@@ -85,6 +85,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set

arch/arm/kernel/Makefile

@@ -25,7 +25,7 @@ obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
 
-obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
+obj-$(CONFIG_IWMMXT)		+= iwmmxt.o iwmmxt-notifier.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/kernel/apm.c

@@ -10,7 +10,6 @@
  * [This document is available from Microsoft at:
  *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/timer.h>

arch/arm/kernel/asm-offsets.c

@@ -105,6 +105,7 @@ int main(void)
   BLANK();
   DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
   DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
-  DEFINE(PROCINFO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mmu_flags));
+  DEFINE(PROCINFO_MM_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
+  DEFINE(PROCINFO_IO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_io_mmu_flags));
   return 0; 
 }

arch/arm/kernel/bios32.c

@@ -5,7 +5,6 @@
  *
  *  Bits taken from various places.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>

arch/arm/kernel/compat.c

@@ -15,7 +15,6 @@
  *  the kernel for 5 years from now (2001). This will allow boot loaders
  *  to convert to the new struct tag way.
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>

arch/arm/kernel/debug.S

@@ -9,7 +9,6 @@
  *
  *  32-bit debugging code
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 
 		.text

arch/arm/kernel/ecard.c

@@ -27,7 +27,6 @@
  */
 #define ECARD_C
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -620,7 +619,7 @@ ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg
 		ecard_t *ec = slot_to_ecard(slot);
 
 		if (ec->claimed) {
-			struct irqdesc *d = irqdesc + ec->irq;
+			struct irq_desc *d = irq_desc + ec->irq;
 			/*
 			 * this ugly code is so that we can operate a
 			 * prioritorising system:

arch/arm/kernel/entry-armv.S

@@ -14,7 +14,6 @@
  *  Note:  there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
  *  it to save wrong values...  Be aware!
  */
-#include <linux/config.h>
 
 #include <asm/memory.h>
 #include <asm/glue.h>
@@ -590,9 +589,7 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
-#if defined(CONFIG_IWMMXT)
-	bl	iwmmxt_task_switch
-#elif defined(CONFIG_CPU_XSCALE)
+#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
 	add	r4, r2, #TI_CPU_DOMAIN + 40	@ cpu_context_save->extra
 	ldmib	r4, {r4, r5}
 	mar	acc0, r4, r5

arch/arm/kernel/entry-common.S

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 
 #include <asm/unistd.h>
 

arch/arm/kernel/entry-header.S

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
 

arch/arm/kernel/fiq.c

@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/seq_file.h>
 
 #include <asm/cacheflush.h>

arch/arm/kernel/head-nommu.S

@@ -12,7 +12,6 @@
  *    for 32-bit CPUs which has a process ID register(CP15).
  *
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 

arch/arm/kernel/head.S

@@ -11,7 +11,6 @@
  *
  *  Kernel startup code for all 32-bit CPUs
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 
@@ -221,7 +220,7 @@ __create_page_tables:
 	teq	r0, r6
 	bne	1b
 
-	ldr	r7, [r10, #PROCINFO_MMUFLAGS]	@ mmuflags
+	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
 	/*
 	 * Create identity mapping for first MB of kernel to
@@ -272,8 +271,7 @@ __create_page_tables:
 #endif
 
 #ifdef CONFIG_DEBUG_LL
-	bic	r7, r7, #0x0c			@ turn off cacheable
-						@ and bufferable bits
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	/*
 	 * Map in IO space for serial debugging.
 	 * This allows debug messages to be output

arch/arm/kernel/iwmmxt-notifier.c

@@ -0,0 +1,64 @@
+/*
+ *  linux/arch/arm/kernel/iwmmxt-notifier.c
+ *
+ *  XScale iWMMXt (Concan) context switching and handling
+ *
+ *  Initial code:
+ *  Copyright (c) 2003, Intel Corporation
+ *
+ *  Full lazy switching support, optimizations and more, by Nicolas Pitre
+ *  Copyright (c) 2003-2004, MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+	struct thread_info *thread = t;
+
+	switch (cmd) {
+	case THREAD_NOTIFY_FLUSH:
+		/*
+		 * flush_thread() zeroes thread->fpstate, so no need
+		 * to do anything here.
+		 *
+		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
+		 * initialised state information on the first fault.
+		 */
+
+	case THREAD_NOTIFY_RELEASE:
+		iwmmxt_task_release(thread);
+		break;
+
+	case THREAD_NOTIFY_SWITCH:
+		iwmmxt_task_switch(thread);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+	.notifier_call	= iwmmxt_do,
+};
+
+static int __init iwmmxt_init(void)
+{
+	thread_register_notifier(&iwmmxt_notifier_block);
+
+	return 0;
+}
+
+late_initcall(iwmmxt_init);

arch/arm/kernel/iwmmxt.S

@@ -271,30 +271,27 @@ ENTRY(iwmmxt_task_restore)
 /*
  * Concan handling on task switch
  *
- * r0 = previous task_struct pointer (must be preserved)
- * r1 = previous thread_info pointer
- * r2 = next thread_info pointer (must be preserved)
+ * r0 = next thread_info pointer
  *
- * Called only from __switch_to with task preemption disabled.
- * No need to care about preserving r4 and above.
+ * Called only from the iwmmxt notifier with task preemption disabled.
  */
 ENTRY(iwmmxt_task_switch)
 
-	mrc	p15, 0, r4, c15, c1, 0
-	tst	r4, #0x3			@ CP0 and CP1 accessible?
+	mrc	p15, 0, r1, c15, c1, 0
+	tst	r1, #0x3			@ CP0 and CP1 accessible?
 	bne	1f				@ yes: block them for next task
 
-	ldr	r5, =concan_owner
-	add	r6, r2, #TI_IWMMXT_STATE	@ get next task Concan save area
-	ldr	r5, [r5]			@ get current Concan owner
-	teq	r5, r6				@ next task owns it?
+	ldr	r2, =concan_owner
+	add	r3, r0, #TI_IWMMXT_STATE	@ get next task Concan save area
+	ldr	r2, [r2]			@ get current Concan owner
+	teq	r2, r3				@ next task owns it?
 	movne	pc, lr				@ no: leave Concan disabled
 
-1:	eor	r4, r4, #3			@ flip Concan access
-	mcr	p15, 0, r4, c15, c1, 0
+1:	eor	r1, r1, #3			@ flip Concan access
+	mcr	p15, 0, r1, c15, c1, 0
 
-	mrc	p15, 0, r4, c2, c0, 0
-	sub	pc, lr, r4, lsr #32		@ cpwait and return
+	mrc	p15, 0, r1, c2, c0, 0
+	sub	pc, lr, r1, lsr #32		@ cpwait and return
 
 /*
  * Remove Concan ownership of given task

arch/arm/kernel/module.c

@@ -9,7 +9,6 @@
  *
  * Module allocation method suggested by Andi Kleen.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/kernel.h>

arch/arm/kernel/process.c

@@ -10,7 +10,6 @@
  */
 #include <stdarg.h>
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -353,9 +352,6 @@ void flush_thread(void)
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
 
 	thread_notify(THREAD_NOTIFY_FLUSH, thread);
-#if defined(CONFIG_IWMMXT)
-	iwmmxt_task_release(thread);
-#endif
 }
 
 void release_thread(struct task_struct *dead_task)
@@ -363,9 +359,6 @@ void release_thread(struct task_struct *dead_task)
 	struct thread_info *thread = task_thread_info(dead_task);
 
 	thread_notify(THREAD_NOTIFY_RELEASE, thread);
-#if defined(CONFIG_IWMMXT)
-	iwmmxt_task_release(thread);
-#endif
 }
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");

arch/arm/kernel/ptrace.c

@@ -9,7 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>

arch/arm/kernel/setup.c

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
@@ -345,9 +344,9 @@ static void __init setup_processor(void)
 	cpu_cache = *list->cache;
 #endif
 
-	printk("CPU: %s [%08x] revision %d (ARMv%s)\n",
+	printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08x\n",
 	       cpu_name, processor_id, (int)processor_id & 15,
-	       proc_arch[cpu_architecture()]);
+	       proc_arch[cpu_architecture()], cr_alignment);
 
 	sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
 	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);

arch/arm/kernel/signal.c

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/ptrace.h>

arch/arm/kernel/smp.c

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>

arch/arm/kernel/time.c

@@ -16,7 +16,6 @@
  *  1998-12-20  Updated NTP code according to technical memorandum Jan '96
  *              "A Kernel Model for Precision Timekeeping" by Dave Mills
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>

arch/arm/kernel/traps.c

@@ -12,7 +12,6 @@
  *  'linux/arch/arm/lib/traps.S'.  Mostly a debugging aid, but will probably
  *  kill the offending process.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/spinlock.h>

arch/arm/kernel/vmlinux.lds.S

@@ -4,7 +4,6 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
-#include <linux/config.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 	

arch/arm/lib/backtrace.S

@@ -10,7 +10,6 @@
  * 27/03/03 Ian Molton Clean up CONFIG_CPU
  *
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 		.text

arch/arm/lib/bitops.h

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 
 #if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
 	.macro	bitop, instr