aha/drivers/ide/ide-generic.c

150 lines
3.9 KiB
C
Raw Normal View History

/*
* generic/default IDE host driver
*
* Copyright (C) 2004, 2008-2009 Bartlomiej Zolnierkiewicz
* This code was split off from ide.c. See it for original copyrights.
*
* May be copied or modified under the terms of the GNU General Public License.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ide.h>
#include <linux/pci_ids.h>
/* FIXME: convert arm and m32r to use ide_platform host driver */
#ifdef CONFIG_ARM
#include <asm/irq.h>
#endif
#ifdef CONFIG_M32R
#include <asm/m32r.h>
#endif
#define DRV_NAME "ide_generic"
static int probe_mask;
module_param(probe_mask, int, 0);
MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
static const struct ide_port_info ide_generic_port_info = {
.host_flags = IDE_HFLAG_NO_DMA,
.chipset = ide_generic,
};
#ifdef CONFIG_ARM
static const u16 legacy_bases[] = { 0x1f0 };
static const int legacy_irqs[] = { IRQ_HARDDISK };
#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || \
defined(CONFIG_PLAT_OPSPUT)
static const u16 legacy_bases[] = { 0x1f0 };
static const int legacy_irqs[] = { PLD_IRQ_CFIREQ };
#elif defined(CONFIG_PLAT_MAPPI3)
static const u16 legacy_bases[] = { 0x1f0, 0x170 };
static const int legacy_irqs[] = { PLD_IRQ_CFIREQ, PLD_IRQ_IDEIREQ };
#elif defined(CONFIG_ALPHA)
static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 };
static const int legacy_irqs[] = { 14, 15, 11, 10 };
#else
static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
static const int legacy_irqs[] = { 14, 15, 11, 10, 8, 12 };
#endif
static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary)
{
#ifdef CONFIG_PCI
struct pci_dev *p = NULL;
u16 val;
for_each_pci_dev(p) {
if (pci_resource_start(p, 0) == 0x1f0)
*primary = 1;
if (pci_resource_start(p, 2) == 0x170)
*secondary = 1;
/* Cyrix CS55{1,2}0 pre SFF MWDMA ATA on the bridge */
if (p->vendor == PCI_VENDOR_ID_CYRIX &&
(p->device == PCI_DEVICE_ID_CYRIX_5510 ||
p->device == PCI_DEVICE_ID_CYRIX_5520))
*primary = *secondary = 1;
/* Intel MPIIX - PIO ATA on non PCI side of bridge */
if (p->vendor == PCI_VENDOR_ID_INTEL &&
p->device == PCI_DEVICE_ID_INTEL_82371MX) {
pci_read_config_word(p, 0x6C, &val);
if (val & 0x8000) {
/* ATA port enabled */
if (val & 0x4000)
*secondary = 1;
else
*primary = 1;
}
}
}
#endif
}
static int __init ide_generic_init(void)
{
struct ide_hw hw, *hws[] = { &hw };
unsigned long io_addr;
int i, rc = 0, primary = 0, secondary = 0;
ide_generic_check_pci_legacy_iobases(&primary, &secondary);
if (!probe_mask) {
printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" "
"module parameter for probing all legacy ISA IDE ports\n");
if (primary == 0)
probe_mask |= 0x1;
if (secondary == 0)
probe_mask |= 0x2;
} else
printk(KERN_INFO DRV_NAME ": enforcing probing of I/O ports "
"upon user request\n");
for (i = 0; i < ARRAY_SIZE(legacy_bases); i++) {
io_addr = legacy_bases[i];
if ((probe_mask & (1 << i)) && io_addr) {
if (!request_region(io_addr, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
"not free.\n",
DRV_NAME, io_addr, io_addr + 7);
rc = -EBUSY;
continue;
}
if (!request_region(io_addr + 0x206, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX "
"not free.\n",
DRV_NAME, io_addr + 0x206);
release_region(io_addr, 8);
rc = -EBUSY;
continue;
}
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
#ifdef CONFIG_IA64
hw.irq = isa_irq_to_vector(legacy_irqs[i]);
#else
hw.irq = legacy_irqs[i];
#endif
rc = ide_host_add(&ide_generic_port_info, hws, 1, NULL);
if (rc) {
release_region(io_addr + 0x206, 1);
release_region(io_addr, 8);
}
}
ide-generic: probing bugfix On Tuesday 05 February 2008, Linus Torvalds wrote: > > On Sat, 2 Feb 2008, Bartlomiej Zolnierkiewicz wrote: > > > > * next part of IDE probing code re-organization saga > >   (that would be me) > > This seems to cause very irritating and bogus messages for me: > >       Probing IDE interface ide0... >       Probing IDE interface ide1... >       ide2: I/O resource 0x0-0x7 not free. >       ide2: ports already in use, skipping probe >       ide3: I/O resource 0x0-0x7 not free. >       ide3: ports already in use, skipping probe >       ide4: I/O resource 0x0-0x7 not free. >       ide4: ports already in use, skipping probe >       ide5: I/O resource 0x0-0x7 not free. >       ide5: ports already in use, skipping probe >       ide6: I/O resource 0x0-0x7 not free. >       ide6: ports already in use, skipping probe >       ide7: I/O resource 0x0-0x7 not free. >       ide7: ports already in use, skipping probe >       ide8: I/O resource 0x0-0x7 not free. >       ide8: ports already in use, skipping probe >       ide9: I/O resource 0x0-0x7 not free. >       ide9: ports already in use, skipping probe > > and that's just totally bogus. It shouldn't even request that region, > since it's not been allocated! The commit 139ddfcab50e5eabcc88341c8743a990ac1be6a2 ("ide: move handling of I/O resources out of ide_probe_port()") changed the ordering of hwif->noprobe check vs ide_hwif_request_regions() call (so that we now reserve I/O regions before checking for hwif->noprobe). However ide-generic host driver depended on hwif->noprobe to be set for skipping probing of empty ide_hwifs[] slots. Fix it by passing only indexes of non-empty slots to ide_device_add_all() from ide_generic_init(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06 01:57:48 +00:00
}
return rc;
}
module_init(ide_generic_init);
MODULE_LICENSE("GPL");